Arch-general October 2014

arch-general@lists.archlinux.org

99 participants
63 discussions

Re: [arch-general] [arch-dev-public] Changes to microcode updates
by Damjan Georgievski 28 Oct '14

28 Oct '14

On 12 October 2014 14:28, Thomas Bächler <thomas(a)archlinux.org> wrote: > Intel released a new microcode update that disables an instruction on > Haswell CPUs. However, Linux doesn't handle this very well and in > combination with our glibc version, this essentially crashes your system. > > The solution is to use the "new" early microcode update mechanism that > was introduced almost two years ago ([1]). This means we need to build > microcode support into the kernel. from that documentation I didn't understand why can't the microcode be part of the standard /boot/initramfs-linux.img in ArchLinux? > [1] > http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/Documen… -- damjan

5 4

[arch-general] nouveau and nividia bios extract
by pete nikolic 26 Oct '14

26 Oct '14

Hi folks . One of those i cant sort on my own i am afraid I have downloaded the nouveau-fw package run makepkg it down loads the needed files all ok but the fails completely and silently if i try to run the NVIDIA package with the --extract-only switch i get complained at that the package is intended for the x86 platform and i am using the x86_64 platform . According to the package page on the Arch site it should work help please totally stumped right now . Thanks Pete . -- Illegitimi non carborundum . ro for the purists out there Noli nothis permittere te terere.

3 4

Re: [arch-general] [Solved] SASL kerberos authentication problem
by Hal Martin 25 Oct '14

25 Oct '14

I figured out my problem. The client connecting to libvirtd requires cyrus-sasl-gssapi to be installed or it will fail with the "No worthy mechs found" error. I feel a bit silly right now... -Hal On Sat, Oct 25, 2014 at 7:15 PM, Hal Martin <hal.martin(a)gmail.com> wrote: > Hi all, > > I'm trying to use SASL to authenticate against my KDC. I'd like to > have libvirt users use their kerberos credentials to login, but right > now it's not working. Kerberos authentication in general works. The > computer has a keytab installed and I can successfully obtain a ticket > through kinit, libvirt has a principle configured for the host. > > libvirt error: > authentication failed: Failed to start SASL negotiation: -4 (SASL(-4): > no mechanism available: No worthy mechs found) > > /etc/sasl2/libvirt.conf: > mech_list: gssapi > keytab: /etc/libvirt/krb5.tab > > /etc/conf.d/saslauthd: > SASLAUTHD_OPTS="-a kerberos5 ldap pam" > > lsmod | grep gss: > rpcsec_gss_krb5 30147 0 > auth_rpcgss 54612 1 rpcsec_gss_krb5 > oid_registry 12419 1 auth_rpcgss > sunrpc 249148 6 nfs,rpcsec_gss_krb5,auth_rpcgss,lockd > > packages: > extra/cyrus-sasl 2.1.26-7 [installed] > extra/cyrus-sasl-gssapi 2.1.26-7 [installed] > extra/cyrus-sasl-ldap 2.1.26-7 [installed] > > Following the instructions here I tried to use SASL to search LDAP: > http://research.imb.uq.edu.au/~l.rathbone/ldap/gssapi.shtml > > I end up with the same error they got (they didn't have > cyrus-sasl-gssapi installed, I do): > ~$ ldapsearch -H ldap://freeipa -LLL -b 'dc=watchmysys,dc=com' > '(givenname=hal)' cn > SASL/EXTERNAL authentication started > ldap_sasl_interactive_bind_s: Unknown authentication method (-6) > additional info: SASL(-4): no mechanism available: > > Any suggestions would be greatly appreciated. > > Thanks, > Hal

1 0

[arch-general] SASL kerberos authentication problem
by Hal Martin 25 Oct '14

25 Oct '14

Hi all, I'm trying to use SASL to authenticate against my KDC. I'd like to have libvirt users use their kerberos credentials to login, but right now it's not working. Kerberos authentication in general works. The computer has a keytab installed and I can successfully obtain a ticket through kinit, libvirt has a principle configured for the host. libvirt error: authentication failed: Failed to start SASL negotiation: -4 (SASL(-4): no mechanism available: No worthy mechs found) /etc/sasl2/libvirt.conf: mech_list: gssapi keytab: /etc/libvirt/krb5.tab /etc/conf.d/saslauthd: SASLAUTHD_OPTS="-a kerberos5 ldap pam" lsmod | grep gss: rpcsec_gss_krb5 30147 0 auth_rpcgss 54612 1 rpcsec_gss_krb5 oid_registry 12419 1 auth_rpcgss sunrpc 249148 6 nfs,rpcsec_gss_krb5,auth_rpcgss,lockd packages: extra/cyrus-sasl 2.1.26-7 [installed] extra/cyrus-sasl-gssapi 2.1.26-7 [installed] extra/cyrus-sasl-ldap 2.1.26-7 [installed] Following the instructions here I tried to use SASL to search LDAP: http://research.imb.uq.edu.au/~l.rathbone/ldap/gssapi.shtml I end up with the same error they got (they didn't have cyrus-sasl-gssapi installed, I do): ~$ ldapsearch -H ldap://freeipa -LLL -b 'dc=watchmysys,dc=com' '(givenname=hal)' cn SASL/EXTERNAL authentication started ldap_sasl_interactive_bind_s: Unknown authentication method (-6) additional info: SASL(-4): no mechanism available: Any suggestions would be greatly appreciated. Thanks, Hal

1 0

[arch-general] NV GeForce 7600, nvidia-304xx-lts, but Failed to load module "nvidia"
by Csányi Pál 25 Oct '14

25 Oct '14

Hi, I'm trying to replace nouveau driver with nvidia-304xx-lts for my NVIDIA Corporation G73 [GeForce 7600 GT] videocard. I'm following advices at https://wiki.archlinux.org/index.php/Nvidia. I have installed the linux kernel: core/linux-lts 3.14.21-1. I modified the script for switching from nouveau to nvidia, like: [code] #!/bin/bash # nouveau -> nvidia # run as root set -e # check if root if [[ $EUID -ne 0 ]]; then echo "You must be root to run this script. Aborting..."; exit 1; fi if [ -e /etc/X11/xorg.conf.d/30-nouveau.conf ] then rm -v /etc/X11/xorg.conf.d/30-nouveau.conf fi cp /Adatok/ArchLinuxBeallitasok/30-nvidia.conf /etc/X11/xorg.conf.d/ sed -i 's/MODULES="nouveau"/#MODULES="nouveau"/' /etc/mkinitcpio.conf pacman -Rdds --noconfirm xf86-video-nouveau mesa-libgl lib32-mesa-dri lib32-mesa-libgl pacman -S --noconfirm nvidia-304xx-lts lib32-nvidia-304xx-libgl mkinitcpio -p linux reboot [/code] The 30-nvidia.conf is: [code] Section "Device" Identifier "Nvidia Card" Driver "nvidia" VendorName "NVIDIA Corporation" Option "NoLogo" "true" EndSection [/code] When I run after reboot and bash login: $ startx I get not the X Window system, but error messages. The /var/log/Xorg.0.log file is: [log] [ 229.009] (II) LoadModule: "nvidia" [ 229.009] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so [ 229.010] (II) Module nvidia: vendor="NVIDIA Corporation" [ 229.010] compiled for 4.0.2, module version = 1.0.0 [ 229.010] Module class: X.Org Video Driver [ 229.012] (EE) NVIDIA: Failed to load the NVIDIA kernel module. Please check your [ 229.012] (EE) NVIDIA: system's kernel log for additional error messages. [ 229.012] (II) UnloadModule: "nvidia" [ 229.012] (II) Unloading nvidia [ 229.013] (EE) Failed to load module "nvidia" (module-specific error, 0) [ 229.013] (EE) No drivers available. [/log] What am I missing here? How can I solve this problem? -- Regards from Pal

5 8

[arch-general] nm-applet and ethernet
by Klearchos-Angelos Gkountras 25 Oct '14

25 Oct '14

is there any problem with ethernet amd nm-applet ? i cant connect via ethernet -- Klearchos-Angelos Gkountras ---------------------------------------- weblog → http://jemadux.noblogs.org xmpp → kag(a)grrlz.net Diaspora → jemadux(a)diasp.eu irc → jemadux @ freenode/oftc

8 10

Re: [arch-general] [arch-dev-public] Changes to microcode updates
by Genes Lists 24 Oct '14

24 Oct '14

For info - I have tried to get it working in refind and failed. I added a second initrd line in the boot stanza in refind.conf. But the firmware was not updated. I added to refind sourceforge report[1], perhaps Rod will respond. [1] https://sourceforge.net/p/refind/discussion/general/thread/7da6cd81/ gene

8 19

[arch-general] Problems updating java
by Gerhard Kugler 23 Oct '14

23 Oct '14

Hi, if I type "pacman Syu" I get messages like "java-runtime-common: /usr/bin/java exists ..." and "java-environment-common: /usr/bin/appletviewer exists ..." and because of that error nothing is upgraded. Regardless of my answer to questions about alternatives in java packages. Gerhard -- Gerhard Kugler Bensheim

7 7

[arch-general] Problems with new version of gsfonts
by Ondřej Kučera 22 Oct '14

22 Oct '14

Hi, I've noticed that the current gsfonts package is "built" from different sources (and I'm also aware of https://bugs.archlinux.org/task/42391). However, I've got two issues with it. First of all, the fonts have now different names. For example, "Nimbus Sans L" is now just "Nimbus Sans". That means that all applications that were set to use the font now need to be re-configured. That's of course something I'll have to do but maybe a warning (ideally on the front page/RSS or at least in a post install message) would be good. The second problem is worse. It seems that this version of the fonts doesn't contain all characters it used to. For example Czech diacritical characters seem to be missing (again, at least within Nimbus Sans). Does anyone know what the reason is? It's obviously not a packaging problem, the sources must lack them. For me it is a regression which makes the fonts unusable. :-( So my question basically is whether this is fixable or whether I should look for a different default font (I've been using Nimbus Sans L as a default font for everything for many, many years). Thank you. Ondra -- Regards, Ondřej Kučera

1 0

[arch-general] Is sloppy/mouse focus broken in Gnome 3.14?
by Magnus Therning 22 Oct '14

22 Oct '14

Has anyone else found that sloppy focus and focus-follows-mouse are behaving strangely since the upgrade to Gnome3.14? This is the behaviour I observe: 1. Have two gnome-terminals on desktop A, each one covering one half of the screen 2. Have one maximised gnome-terminal on desktop B 3. On desktop A, move mouse (and focus) to first window. 4. Confirm that Ctrl-Tab switches focus to second window. 5. Move to desktop B 6. Move back to desktop A 7. Confirm that first window has focus, because that's where the mouse pointer is At this point Ctrl-Tab can't be used to switch to the second window! Forcing the focus, either by clicking in the first windows, or by moving the mouse to the second window, will result in Ctrl-Tab working as expected again. Is anyone else seeing this behaviour? Is it a known bug? /M -- Magnus Therning OpenPGP: 0xAB4DFBA4 email: magnus(a)therning.org jabber: magnus(a)therning.org twitter: magthe http://therning.org/magnus Perl is another example of filling a tiny, short-term need, and then being a real problem in the longer term. -- Alan Kay

1 0

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

Arch-general October 2014