February 2014 - Arch-general - lists.archlinux.org

[arch-general] journalctl and I/O errors
by Janna Martl 08 Feb '14

08 Feb '14

A couple months ago, I started getting I/O errors (see below) whenever I tried to do journalctl -n X for sufficiently large X (and journalctl would segfault). I assumed my hard drive was going to die, but in the mean time this was annoying so I did: # cp -rp /var/log/journal{,-clone} # rm -rf /var/log/journal # mv /var/log/journal{-clone,} There were a few errors after step 1 but this made the segfaulting stop. A few weeks later, same problem, same "fix". A few weeks later, ditto. In all this time, the only I/O errors I've ever seen have been related to accessing the journal. The SMART data for the drive says that the current pending sector count is 57, but the reallocated sector count is 0. So if I'm reading this correctly, there have been a bunch of instances of unreadable sectors, somehow only pertaining to one directory despite efforts to make an independent copy of the data (which should put it in random other sectors), but none of them have been confirmed bad. So at this point I'm guessing it's a systemd bug (and there are no actual bad sectors), but it would be great if someone could confirm that any of this actually makes sense before I file a bug report based on ignorance and speculation. Thanks! - J.M. ------------------------------------------- Example I/O error: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: BMDMA stat 0x5 ata1.00: failed command: READ DMA EXT ata1.00: cmd 25/00:08:c8:ca:92/00:00:2e:00:00/e0 tag 0 dma 4096 in res 51/40:05:cb:ca:92/40:00:2e:00:00/ee Emask 0x9 (media error) ata1.00: status: { DRDY ERR } ata1.00: error: { UNC } ata1.00: configured for UDMA/100 sd 0:0:0:0: [sda] Unhandled sense code sd 0:0:0:0: [sda] mResult: hostbyte=0x00 driverbyte=0x08 sd 0:0:0:0: [sda] mSense Key : 0x3 [current] [descriptor] mDescriptor sense data with sense descriptors (in hex): 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 2e 92 ca cb sd 0:0:0:0: [sda] mASC=0x11 ASCQ=0x4 sd 0:0:0:0: [sda] CDB: mcdb[0]=0x28: 28 00 2e 92 ca c8 00 00 08 00 end_request: I/O error, dev sda, sector 781372107 ata1: EH complete

8 12

[arch-general] No user sound - only root has access alsamixer on virtualbox?
by David C. Rankin 04 Feb '14

04 Feb '14

Guys, I've run into a problem with sound on a new archlinux guest install on virtualbox (v4.36). Only root can see/access the sound system. From the asla page, I've tried 'alsactl init' and I've also tried adding user to the audio group as mentioned in old forum pages, but still only root sees sound. The guest is a fully updated Arch install (with updates through today) Here are the details: As user: 19:46 valhalla:~> alsamixer cannot open mixer: No such file or directory 19:51 valhalla:~> cat /proc/asound/cards 0 [I82801AAICH ]: ICH - Intel 82801AA-ICH Intel 82801AA-ICH with STAC9700,83,84 at irq 11 19:53 valhalla:~> lsmod | grep snd snd_intel8x0 23757 0 snd_ac97_codec 89404 1 snd_intel8x0 ac97_bus 878 1 snd_ac97_codec snd_pcm 63880 2 snd_ac97_codec,snd_intel8x0 snd_page_alloc 5978 2 snd_intel8x0,snd_pcm snd_timer 14946 1 snd_pcm snd 44598 4 snd_ac97_codec,snd_intel8x0,snd_timer,snd_pcm soundcore 4386 1 snd 20:00 valhalla:~> aplay -l aplay: device_list:268: no soundcards found... 20:00 valhalla:~> aplay -L null Discard all samples (playback) or generate zero samples (capture) pulse PulseAudio Sound Server default Default ALSA Output (currently PulseAudio Sound Server) As root: [20:01 valhalla:/home/david] # alsamixer (works fine) No protocol specified xcb_connection_has_error() returned true [20:02 valhalla:/home/david] # aplay -l **** List of PLAYBACK Hardware Devices **** card 0: I82801AAICH [Intel 82801AA-ICH], device 0: Intel ICH [Intel 82801AA-ICH] Subdevices: 1/1 Subdevice #0: subdevice #0 [20:02 valhalla:/home/david] # aplay -L null Discard all samples (playback) or generate zero samples (capture) pulse PulseAudio Sound Server default Default ALSA Output (currently PulseAudio Sound Server) sysdefault:CARD=I82801AAICH Intel 82801AA-ICH, Intel 82801AA-ICH Default Audio Device front:CARD=I82801AAICH,DEV=0 Intel 82801AA-ICH, Intel 82801AA-ICH Front speakers surround40:CARD=I82801AAICH,DEV=0 Intel 82801AA-ICH, Intel 82801AA-ICH 4.0 Surround output to Front and Rear speakers surround41:CARD=I82801AAICH,DEV=0 Intel 82801AA-ICH, Intel 82801AA-ICH 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=I82801AAICH,DEV=0 Intel 82801AA-ICH, Intel 82801AA-ICH 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=I82801AAICH,DEV=0 Intel 82801AA-ICH, Intel 82801AA-ICH 5.1 Surround output to Front, Center, Rear and Subwoofer speakers iec958:CARD=I82801AAICH,DEV=0 Intel 82801AA-ICH, Intel 82801AA-ICH IEC958 (S/PDIF) Digital Audio Output I have since removed the user from audio group since it didn't help. I cannot find a solution. Any thoughts? -- David C. Rankin, J.D.,P.E.

2 8

[arch-general] Problem with cups 1.71 when restart service
by Maykel Franco 04 Feb '14

04 Feb '14

Hi, I have problem with cups in arch. This is the log error_log the cups: E [04/Feb/2014:12:52:24 +0100] Unable to bind socket for address [v1.::1]:631 - Address already in use. E [04/Feb/2014:12:52:24 +0100] Unable to bind socket for address 127.0.0.1:631 - Address already in use. And the printing not works... Thanks in advanced.

7 12

[arch-general] TDE binaries for pre-R14 testing are available (i686 & x86_64)
by David C. Rankin 02 Feb '14

02 Feb '14

Package for the Trinity Desktop upcoming R14 release are available for testing. These packages are within a few commits of what RC1 for the release will be. see: https://wiki.archlinux.org/index.php/Trinity Short version: pacman.conf (i686 or x86_64 as necessary): [trinity] SigLevel = Never Server = http://trinity.ceux.org/r14/x86_64 use meta-package "group" install: pacman -Sy group with "group" tde-core : minimal install - no koffice tde-extra : moderate install - with koffice tde-base : almost all of TDE pacman -Sl trinity to veiw complete list of packages available. Feedback directly to me or to http://bugs.pearsoncomputing.net/enter_bug.cgi?product=TDE -- David C. Rankin, J.D.,P.E.

2 5

[arch-general] rsync-Mirrors
by Jens Arm 01 Feb '14

01 Feb '14

Hi ArchLinux-Team Since about 27.1 there is the following error shown when trying to sync with rsync. I get this error with all rsync-Servers I tried: [snip] receiving file list ... symlink has no referent: "/linux/archlinux/community/os/i686/python-xlib-0.15rc1-6-any.pkg.tar.xz.sig" (in pub) 6282 files to consider IO error encountered -- skipping file deletion [snip] If I look at the homepage about this package it is a bit newer: python2-xlib 0.15rc1-7 Is syncing broken at the moment? Regards Jens

1 0

[arch-general] Drop in the number of ArchWiki registered users
by Dario Giovannetti 01 Feb '14

01 Feb '14

I keep track of some ArchWiki statistics in [1] and I've just realized that in the last month we've had a 6000+ drop in the number of registered users, which is a number that should instead only increase, as we don't have tools for (mass) deleting accounts. Anybody knows what happened? In the month of January, 3 commits have been made to [2], two of which are updates to MediaWiki: maybe one of them caused the issue? [1] https://wiki.archlinux.org/index.php/ArchWiki:Maintenance_Team#Statistics [2] https://projects.archlinux.org/vhosts/wiki.archlinux.org.git/ -- Dario (Kynikos)

2 3