March 2014 - Arch-general - lists.archlinux.org

[arch-general] tap device
by arnaud gaboury 20 Mar '14

20 Mar '14

Hi, I am setting up a network for a container. I have a bridge br0 with a eth adapter "enp7s0" and a tap device "tap0" ******************************* /etc/netctl/bridge Description="Bridge connection" Interface=br0 Connection=bridge BindsToInterfaces=(enp7s0 tap0) IP=static Address='192.168.1.87/24' Gateway='192.168.1.254' DNS='192.168.1.254' /etc/netctl/ethernet Description='ethernet connection' Interface=enp7s0 Connection=ethernet IP=no IP6=no /etc/netctl/tuntap Description='tuntap connection' Interface=tap0 Connection=tuntap Mode='tap' User='nobody' Group='nobody' ****************************** gabx@hortensia ➤➤ ~ % netctl list * ethernet * tuntap * bridge gabx@hortensia ➤➤ ~ % ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: enp7s0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master br0 state UP group default qlen 1000 link/ether 14:da:e9:b5:7a:88 brd ff:ff:ff:ff:ff:ff 3: tap0: <NO-CARRIER,BROADCAST,MULTICAST,PROMISC,UP> mtu 1500 qdisc pfifo_fast master br0 state DOWN group default qlen 500 link/ether 6a:1d:c3:4b:91:4d brd ff:ff:ff:ff:ff:ff 4: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default link/ether 14:da:e9:b5:7a:88 brd ff:ff:ff:ff:ff:ff inet 192.168.1.87/24 brd 192.168.1.255 scope global br0 valid_lft forever preferred_lft forever inet6 fe80::16da:e9ff:feb5:7a88/64 scope link valid_lft forever preferred_lft forever gabx@hortensia ➤➤ ~ % lsmod | grep tun 58:tun 19783 1 ************************************* I do not understand why the tap0 profile is listed as DOWN. (# ip link set dev tap0 up does nothing more) I have a custom kernel. Do I need to add anything? Is there anything wrong on my netctl profiles ? No dhcp enable. TY for help

5 39

Re: [arch-general] user management error
by message 20 Mar '14

20 Mar '14

On 2014-03-18 13:01, arch-general-request(a)archlinux.org wrote: > ------------------------------ > > Message: 7 > Date: Tue, 18 Mar 2014 12:30:34 +0100 > From: Ralf Mardorf <ralf.mardorf(a)alice-dsl.net> > Subject: Re: [arch-general] user management error > > You can't login as user, you log in as root. There seems to be a > serious > language barrier between you and the Arch community. > OK: for archlinux, the first sign-in must be as root? > I assume we are talking about tty, no display manager is involved? > I tried what I think was lxdm, but dvorak recognition fails, so un-installed.

2 1

[arch-general] BTRFS scrub from systemd unit
by Sean Greenslade 20 Mar '14

20 Mar '14

Hi, folks. I've been noodling over this rather odd issue I've been having, and I thought I'd get a second opinion on things. I've got a server with four hard disks, set up in two (separate) BTRFS RAID1 mounts. I just recovered from a bout of SATA signalling issues (which BTRFS did a marvellous job of saving my data from), and I'd like to periodically fire off scrubs to ensure my data's OK. If I manually run a scrub: ---------------------------------------------------- $ sudo btrfs scrub start /media/data/ scrub started on /media/data/, fsid 490b8b7c-59c4-45dc-ac63-6a90f0966776 (pid=14434) ---------------------------------------------------- Then things work as they should: ---------------------------------------------------- $ sudo btrfs scrub status /media/data/ scrub status for 490b8b7c-59c4-45dc-ac63-6a90f0966776 scrub started at Wed Mar 19 20:27:14 2014, running for 40 seconds total bytes scrubbed: 12.70GiB with 0 errors $ sudo btrfs scrub cancel /media/data/ scrub cancelled $ sudo btrfs scrub status /media/data/ scrub status for 490b8b7c-59c4-45dc-ac63-6a90f0966776 scrub started at Wed Mar 19 20:27:14 2014 and was aborted after 89 seconds total bytes scrubbed: 28.17GiB with 0 errors ---------------------------------------------------- So far, so good. So I made a systemd unit to trigger the scrub: ---------------------------------------------------- $ cat /etc/systemd/system/diskscrub.service [Unit] Description=Disk scrub runner [Service] Type=oneshot ExecStart=/usr/bin/btrfs scrub start /media/data ---------------------------------------------------- Now, this unit starts fine, and exits immediately as it should, being a oneshot service and given that the btrfs scrub command backgrounds itself (or something? I'm not exactly sure what it does, but it returns immediately). However, the scrub status does not work and the scrub cannot be canceled: ---------------------------------------------------- $ sudo systemctl start diskscrub $ sudo systemctl status diskscrub diskscrub.service - Disk scrub runner Loaded: loaded (/etc/systemd/system/diskscrub.service; static) Active: inactive (dead) Mar 19 20:33:38 rat systemd[1]: Starting Disk scrub runner... Mar 19 20:33:38 rat systemd[1]: Started Disk scrub runner. Mar 19 20:33:38 rat btrfs[15221]: scrub started on /media/data, fsid 490b8b7c-59c4-45dc-ac63-6a90f0966776 (pid=15222) $ sudo btrfs scrub status /media/data/ scrub status for 490b8b7c-59c4-45dc-ac63-6a90f0966776 no stats available total bytes scrubbed: 0.00 with 0 errors $ sudo btrfs scrub cancel /media/data/ ERROR: scrub cancel failed on /media/data/: not running ---------------------------------------------------- New scrubs cannot be started until the stale/invalid scrub states are deleted (rm -f /var/lib/btrfs/*). So I'm stumped, here. Anyone have any clue as to what's happening? Thanks, --Sean

3 6

[arch-general] graphical display management
by message 19 Mar '14

19 Mar '14

Readers, According to the command 'pacman -Q -e | less', gdm is shown as installed. The command 'startx' doesn't start gdm, but instead the same graphical manager that starts following the test procedure. How to start gdm?

3 2

Re: [arch-general] user management error
by message 19 Mar '14

19 Mar '14

On 2014-03-18 13:01, arch-general-request(a)archlinux.org wrote: > > ------------------------------ > > Message: 6 > Date: Tue, 18 Mar 2014 11:53:08 +0100 > From: Ralf Mardorf <ralf.mardorf(a)alice-dsl.net> > Subject: Re: [arch-general] user management error > > I don't understand you. "su" isn't recognised, but you su to user "a"? > Not at first power-on, but checked that OK after first sign-in as root.

1 0

Re: [arch-general] user management error
by message 19 Mar '14

19 Mar '14

On 2014-03-17 22:59, arch-general-request(a)archlinux.org wrote: > ------------------------------ > > Message: 4 > Date: Mon, 17 Mar 2014 14:50:19 -0400 > From: Gerald Stuhrberg <gstuhrberg(a)gmail.com> > Subject: Re: [arch-general] user management error > > If the directory isn't being mounted, can you please post the contents > of > /etc/fstab ? > There are two entries: /dev/sda... uuid=... / ext4 /dev/sad... uuid=... /home ext4

2 2

[arch-general] When change tty1 the locale change
by Maykel Franco 19 Mar '14

19 Mar '14

Hi, I am spanish. I like arch linux, is my prefer for the fast it. The problem is when I change the tty1, for example, the locale language change to english. Why?? Thanks in advanced.

5 20

[arch-general] Error continuous in log /var/log/messages
by Maykel Franco 19 Mar '14

19 Mar '14

I have received this error constant: Mar 18 19:15:48 arch-maykel dbus[212]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.ModemManager1.service': Unit dbus-org.freedesktop.ModemManager1.service failed to load: No such file or directory Can I help me?? Why?? Thanks in advanced.

2 3

Re: [arch-general] database non-existent error
by message 18 Mar '14

18 Mar '14

On 2014-03-16 21:58, arch-general-request(a)archlinux.org wrote: > ------------------------------ > > Message: 4 > Date: Sun, 16 Mar 2014 20:06:36 +0100 > From: Kacper ?uk <kacper.b.zuk(a)gmail.com> > Subject: Re: [arch-general] database non-existent error > > I believe you've wanted to use pacstrap, not pacman :) > Sorry, pacman was a favourite arcade game...:)

2 1

[arch-general] Pulseaudio 5.1 Setup echoes Front Speakers to Rear speakers
by Mark Lee 18 Mar '14

18 Mar '14

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Salutations, I recently hooked up a 5.1 surround sound receiver to my Haswell setup via HDMI. I used the sound manager in gnome to set the system to output 5.1 surround sound. However, while testing each individual speaker using the gnome sound settings, I found that front speakers were echoing content to rear speakers (with a small delay). I also noticed that if I set the fade to rear, I would lose all front speaker output. Moving the fade to the front reproduced the echo again. This is noticeable in any 5.1 audio I play as well. Has anyone experienced this and found a solution? Regards, Mark -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iF4EAREIAAYFAlMmgTsACgkQZ/Z80n6+J/a4oQD/SmOzZZJ9hlu1o6z1TV62gGqc TVRZrVu2yMBnQb3l5XUA/AznszmgsTjGd7Kq01LvwjzGCCsgkZNDYoz2UXLrZyWT =ekbP -----END PGP SIGNATURE-----

4 7