February 2015 - Arch-general - lists.archlinux.org

Re: [arch-general] Any printer didn't work
by Bastien Traverse 10 Feb '15

10 Feb '15

> When add printer manually on cinnamon. > The printer found, forward , search driver and freeze. > > When add printer manually on KDE. > The printer found, show "Pcik a Driver" and said > "Failed to search for recommended: driver: 'Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked tthe reply, the reply timeout expired, or the network connection was broken.' Hi, there is currently a critical bug preventing from adding a printer in the latest versions of cups: see FS#42666 [1]. To summarize, when trying to find a driver `foomatic list` stalls, hogging up the CPU and `cupsd -l` does the same. See the provided link for upstream bug report URL (they say they can't reproduce it although it affects many Arch users) and link to discussion in the forums. I am currently unable to use any printer either :-/ [1] https://bugs.archlinux.org/task/42666

1 0

[arch-general] FS#41424 - Virtualbox 4.3.14, USB doesn't work flawlessly
by Ralf Mardorf 09 Feb '15

09 Feb '15

Hi, I experienced Virtualbox 4.3.14 x86_64 as broken, when I tried to sync an iPad2 with iTunes running on a XP SP3 guest. I only tested it with USB2 enabled, since it worked with 4.3.12. Usually I use the packages virtualbox, virtualbox-host-dkms, virtualbox-extension-pack and I add the guest additions, that fit to the used vbox version. Because I wasted much time with trying to use 4.3.14, I did an incomplete downgrade to 4.3.12 yet, since I'm short in time, but even with virtualbox 4.3.12-1 virtualbox-host-dkms 4.3.12-1 no extension pack, no USB2 and with wrong guest additions, version 4.3.14, I get rid of the issues. I will complete the downgrade on my machine ASAP and IMO the community packages should be downgraded for the repositories too. Do others experienced issues with Virtualbox 4.3.14 USB too? Since I'm short in time I only reported the bug to https://bugs.archlinux.org/task/41424 I didn't find a related bug, just 4 completely other vbox bug reports. https://www.virtualbox.org/search?q=4.13.14&noquickjump=1&ticket=on results in "No matches found." https://www.virtualbox.org/search?q=usb&noquickjump=1&ticket=on gives tons of hits, no time to care about them right now Regards, Ralf

5 15

[arch-general] linux 3.19 in [testing]
by Tobias Powalowski 09 Feb '15

09 Feb '15

Hi, just released 3.19 kernel to [testing] repository. - nvidia-304xx - virtualbox modules do not build. Please take a look at it. greetings tpowa -- Tobias Powalowski Archlinux Developer & Package Maintainer (tpowa) http://www.archlinux.org tpowa(a)archlinux.org

1 0

[arch-general] I can not login in my system with gdm after update to kernel 3.18.6
by José Vilmar Estácio de Souza 09 Feb '15

09 Feb '15

Hi all. After I upgrade to kernel 3.18.6, I was stuck at the login screen. I type the login and password, press the enter key and the login screen appears again. There are no problems with my login because I can login in the console normaly. After I downgrade to kernel 3.18.5 the problem desappears. Am I doing something wrong? Thanks. []s José Vilmar Estácio de Souza

1 0

[arch-general] strange behaviour after 3.18.6 kernel update
by Genes Lists 09 Feb '15

09 Feb '15

I have one server which does internal mail and nfs - which went weird after about a day on the new kernel. I remote admin via ssh - symptom on the terminal was many commands failed in bad ways. Though 'ls' seemed to be fine. e.g. vi - gave input/output error. journalctl -lf -> bus error Rebooted and it hung on shutdown - there were manu input/output errors on the console - after it stopped on systemd shutdown target and got no further - i hard powered off and back on. Machine came up fine - journalct shows all logging stopped at 9.14 pm and resumed as normal after the reboot at 10.30 pm. Any advice as to what to look for? Anyone else seeing strange IO errors after a period? thanks. gene

2 2

[arch-general] CIFS filename reserved characters in 3.18
by Carl Schaefer 09 Feb '15

09 Feb '15

After upgrading to 3.18 I found that my rsync backup to a CIFS filesystem was failing on filenames that contained reserved characters in the set :<>|*?\ According to [1] the default strategy for handling these characters changed in 3.18, but in my experience (and according to [2]) it didn't work very well. A patch [3] addressing these problems seems to work for me. Carl [1] https://wiki.samba.org/index.php/SMB3-Linux [2] https://bugzilla.kernel.org/show_bug.cgi?id=92401 [3] http://article.gmane.org/gmane.linux.kernel.cifs/10512/

1 0

[arch-general] Any printer didn't work
by MASAKI Yuhsuke 08 Feb '15

08 Feb '15

Hi, I want to use multifaunctional printer Canon MP630 and HP Photosmart 5521. But both didn't work. I reinstalled system and whole package on this month. They worked before then. I checked: * Printers work on other system. * cnijfilter-mp620 ( for MP630), hplip and hplip-plugin ( for 5521 ) are installed. * CUPSd is installed and started. When connected a printer on KDE or Cinnamon, show notifification "New printer conncted." and nothing. Lately, neither show anything at a printer conneced. When add printer manually on cinnamon. The printer found, forward , search driver and freeze. When add printer manually on KDE. The printer found, show "Pcik a Driver" and said "Failed to search for recommended: driver: 'Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked tthe reply, the reply timeout expired, or the network connection was broken.' So I try "Manually Provide a PPD File". When I click "finish," printer name highlighted and disabled finish button. One day, I tried to add printer manually on KDE, finish button worked, added, and test page printed. But today, I attempted to print pages, but not work printer because "the printer is disconnected or turned off." I tried change cable and change port, but still "the printer is disconnected or turned off." I click "Resume printer" on KDE. Printer status changed to "Idle." I send print job, Printer status changed to "Printing," but soon changed to "Idle" without working. When printer reconnected, DE says "Configurating new printer." And return to the beginning but configured printer exists. I remove configured printer, but nothing to change. What should I do? Thank you. ****************************** * The Rider, Hacker and Musician. * +++ ENABLE YOUR HEART +++ ****************************** * MASAKI Yuhsuke. * hydrangea+ml(a)reasonset.net * Website: http://reasonset.net/ * GitHub : https://github.com/reasonset/ * Twitter: @reasonset ******************************

3 4

[arch-general] PAM/crond crashes with glibc 2.21-1
by Genes Lists 08 Feb '15

08 Feb '15

Fully updated from testing repo. Bug filed: https://bugs.archlinux.org/task/43738 After this glibc update I am now getting: crond[952]: PAM unable to dlopen(/usr/lib/security/pam_unix.so): /usr/lib/libpthread.so.0: symbol __getrlimit, version GLIBC_PRIVATE not defined in file libc.so.6 with link time reference crond[952]: PAM adding faulty module: /usr/lib/security/pam_unix.so crond[952]: segfault at 59d6 ip 00000000000059d6 sp 00007fffea697798 error 14 in crond[400000+d000] Perhaps packages need to be rebuilt against the new glibc? Thanks Gene

2 2

[arch-general] Hello!
by Shurjo Sakib Masood 08 Feb '15

08 Feb '15

Hey people, this is Shurjo. Just saying hi :)

9 8

[arch-general] anyone interested in a multilib qt-at-spi package?
by kendell clark 07 Feb '15

07 Feb '15

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 hi all I'm not sure how to begin this, but here goes. In order for screen readers, like orca, to be able to access applications written in qt4 (qt5 handles all of this built in}, it needs a package called qt-at-spi. This is a bridge of sorts which links the qt accessibility API's to the at-spi daemon which orca uses to read the screen. This is in community, so this all works. However, there's an issue that's just obscure enough that I'm not sure how to handle it. The issue arises when 64 bit linux installations try to talk to 32 bit qt applications. Since the qt at-spi bridge is 64 bit, it can't communicate with the 32 bit app, so orca cannot read it. THis makes applications such as teamviewer and skype completely inaccessible on 64 bit systsms. I'm not certain teamviewer is written in qt, but I do knos skype is. Ok, ramble over. Is anyone interested in building a 32 bit version of the qt-at-spi package and possibly throwing it in multilib? THis does not need any maintenance, since this is only for qt4 applications, the package has been deprecated since the code has been murged into qt5. I've tried a few workarounds to no avail. I've tried downloading the i686 package and trying to get pacman to install it, this didn't work. I tried extracting the actual .so files out and placing them in lib32, but I don't know enough about how the underlying system works to make this work. Thoughts? Kendell clarK -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAEBCgAGBQJU1YfJAAoJEGYgJ5/kqBTd1Z0P/3o9RwAYZsm3I4SDoIXkhy6S tE0LZabP5EV3e5YrP+FvxVkL+t7Dp6GQdTqCEd0f14pptMLepagSrZUTLTAMvi7T jPX1dzz6Vm8atsbdpMa/bSZ0Jxok4adgejbjQhKgOR3M8Uzd8xojudNrhF8pDrVo K8bbory0Azj89fSrJOmp6O9Dx4AOlUbtZa6KWqQY/0YVPjKfG3chI9gcw3p1ldlZ KEtYhL6TSR1Fo3knDpbY5DFG4kDAtGYNnjUq14tF7S7R5QJ7LDlnHYTank0Xf3QW 2cMnozBdWmcaXvg/fpiO4WyYjGTsB3D1x4xoQ3U6l/VYFbY2FTSxbUN074e1KDI7 uh8FEbMudLFVaUokJKgBXCe8ARRb7XydW6WTA7tvIpSG3Hm4MplGV6qnpZxir8jB ZxYwZlsUWqqVT2FKXRM+xT+XAKxxoak+iNRgryAn1hXjV422BM5HHgaDE9GINH7V DKmbJstG2a6BS3cI4eMNXpnwAMWQILlzP2kaY31J/iYmfLg9ONTQbVyvWyMRuM50 QpCLiryZcFaya8ogmM+TjFLNaDz1da8hmUZeyYFmiMTJ4iC//SSJsOtIB+1fy0PB 3vT/k0gsYmnR2cCVaQIh04MwDsQT6FstczHJDT1ilcjiL1aR/jDpHIRZW+4y+ZVS tI1xjE9ApHna+mAw96xB =eJyz -----END PGP SIGNATURE-----

2 1