August 2015 - Arch-general - lists.archlinux.org

[arch-general] aurweb is not synchronized with AUR4
by Roman Rader 26 Aug '15

26 Aug '15

Noticed that when I update package via git for AUR4 information about package is not updating on aurweb. For example: https://aur.archlinux.org/packages/vagga-bin AND https://aur.archlinux.org/cgit/aur.git/tree/PKGBUILD?h=vagga-bin Version and dependencies in PKGBUILD updated, but web shows old ones. And 'yaourt' also shows old versions, btw.

3 3

Re: [arch-general] ABS
by flow 26 Aug '15

26 Aug '15

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 > On Tue, 25 Aug 2015 03:05:14 +0200 > Jens Adam <jra(a)byte.cx> wrote: > > > > Where I can get old ABS content? > > Flow, you can get it through SVN or the Git mirror. Info should be in the wiki. Still can't find out yet where is avaible libreoffice-fresh 4.4.5-1 - -- _ ~~~ This PGP signature only certifies the sender and date of the message. It implies no approval from the administrators of nym.mixmin.net. Date: Wed Aug 26 22:18:04 2015 GMT From: flow(a)nym.mixmin.net -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iEYEARECAAYFAlXeOx0ACgkQViYZwngkfDvPPgCglUnq7uegcEY89zHOpkupMicH drgAoJdysF+Mbl7el2F0smP0COfQGt04 =0HRW -----END PGP SIGNATURE-----

3 2

[arch-general] LTS Kernels
by bildermejl76＠gmail.com 26 Aug '15

26 Aug '15

----------------------------------------------------------------------------- Message: 2Date: Tue, 25 Aug 2015 23:39:16 +0200 From: Patrick Helfenstein <pfilz0(a)bluewin.ch> To: arch-general(a)archlinux.org Subject: Re: [arch-general] LTS Kernels Message-ID: <55DCE084.2070504(a)bluewin.ch> Content-Type: text/plain; charset=utf-8 >David, >No changes are necessary in any of the /etc/grub.d files. >the LTS kernel will be found automatically when running grub-mkconfig. >Cheers, Patrick Thanks Patrick! I think I will try installing an LTS kernel, but I heard a new LTS kernel is being released, 4.1. Do you have any idea how long it will take to show up in the repository? Cheers ------------------------------------------------------------------------------ – Skickat från Mailbox

1 0

[arch-general] PHP - libphp5.so, OR php-fpm and mod_proxy_fcgi, OR php5 with apache2-mpm-worker and mod_fcgid
by David C. Rankin 26 Aug '15

26 Aug '15

All, When I last loaded a full server install in 2013, at that time, the use of libphp5.so was discouraged by the wiki, indicating that path was likely to be deprecated. The wiki suggested an alternate install using php-fpm and mod_proxy_fcgi, or php5 with apache2-mpm-worker and mod_fcgid as the preferred approaches for PHP. Fast forward 2-years, a failed disk controller and a new server build in 2015. Configuring PHP, I was surprised to find libphp5.so still an option, much less the first option suggested in the wiki. What happened? What is the proper-suggested PHP configuration? Is libphp5.so still on its way out? (there is no indication this is still the case). I have a relatively lightly used web-server, so the use of mod_mpm_prefork and loss of threading is not an issue with my setup. Why would I choose either php-fpm and mod_proxy_fcgi, or php5 with apache2-mpm-worker and mod_fcgid as an alternative to libphp5.so for my PHP config on Arch? I'm trying to find out what the trade-offs are and whether it would make sense to use one way over another. Ideas? -- David C. Rankin, J.D.,P.E.

2 1

[arch-general] LTS Kernels
by bildermejl76＠gmail.com 25 Aug '15

25 Aug '15

Hello, I have been thinking about instslling an LTS kernel, but I don't have the skills to make complete sense of the wiki pages about grub and kernel installation. I have 4.1.15 installed now and not so many GUI programs installed beside Libre Office, web browser... mostly CLI utilities. But I wonder if I can install an LTS kernel in an already existing installation as a fallback? The wiki sounds fairly straight forward, but I get lost where it says "install kernel" without saying how, and to "edit the grub config file" without an explanation, and to "generate the main configuration file". Not sure whether I am getting in way over my head or if it is actually quite simple. That's what I need to know. Thanks, David – Skickat från Mailbox

7 6

[arch-general] Cannot tether from Android using USB or bluetooth
by Alfredo Palhares 24 Aug '15

24 Aug '15

Hello fellow Arch Linux users, I recently tried to use USB tethering, without success. The interface just won't come up. I enabled the usb tethering on the phone, but ip link didn't show any new interface: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: enp0s25: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel state DOWN mode DEFAULT group default qlen 1000 link/ether 28:d2:44:6c:0b:f8 brd ff:ff:ff:ff:ff:ff 3: wlp3s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 7c:7a:91:21:19:39 brd ff:ff:ff:ff:ff:ff 5: wwp0s20u4i6: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 02:15:e0:ec:01:00 brd ff:ff:ff:ff:ff:ff (wwp0s20u4i6 is my builtin modem interface) journalctl -k tells me the following: myhost kernel: usb 1-1: device descriptor read/64, error -110 myhost kernel: usb 1-1: new low-speed USB device number 37 using xhci_hcd myhost kernel: usb 1-1: device descriptor read/64, error -71 myhost kernel: usb 1-1: device descriptor read/64, error -110 myhost kernel: usb 1-1: new low-speed USB device number 38 using xhci_hcd myhost kernel: usb 1-1: Device not responding to setup address. myhost kernel: usb 1-1: Device not responding to setup address. myhost kernel: usb 1-1: device not accepting address 38, error -71 myhost kernel: usb 1-1: new low-speed USB device number 39 using xhci_hcd myhost kernel: usb 1-1: Device not responding to setup address. myhost kernel: usb 1-1: Device not responding to setup address. myhost kernel: usb 1-1: device not accepting address 39, error -71 myhost kernel: usb usb1-port1: unable to enumerate USB device myhost kernel: usb 1-1: new high-speed USB device number 40 using xhci_hcd myhost kernel: cdc_acm 1-1:1.1: ttyACM3: USB ACM device myhost kernel: usb 1-1: USB disconnect, device number 40 myhost kernel: cdc_acm 1-1:1.1: failed to set dtr/rts myhost kernel: usb 1-1: new high-speed USB device number 41 using xhci_hcd myhost kernel: rndis_host 1-1:1.0 usb0: register 'rndis_host' at usb-0000:00:14.0-1, RNDIS device, aa:bb:cc:dd:ee:ff myhost kernel: rndis_host 1-1:1.0 enp0s20u1: renamed from usb0 myhost kernel: usb 1-1: USB disconnect, device number 41 myhost kernel: rndis_host 1-1:1.0 enp0s20u1: unregister 'rndis_host' usb-0000:00:14.0-1, RNDIS device myhost kernel: usb 1-1: new low-speed USB device number 43 using xhci_hcd The important stuff seems to be here: rndis_host 1-1:1.0 enp0s20u1: renamed from usb0 usb 1-1: USB disconnect, device number 41 rndis_host 1-1:1.0 enp0s20u1: unregister 'rndis_host' usb-0000:00:14.0-1, RNDIS device usb 1-1: new low-speed USB device number 43 using xhci_hcd The interface comes up but its immediately down, for some weird reason. I can't reproduce the problem every time. Anyone can point me on how to debug this further? Regards, -- Alfredo Palhares GPG/PGP Key Fingerprint 68FC B06A 6C22 8B9B F110 38D6 E8F7 4D1F 0763 CAAD

3 2

[arch-general] ABS
by flow 24 Aug '15

24 Aug '15

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Where I can get old ABS content? - -- _ ~~~ This PGP signature only certifies the sender and date of the message. It implies no approval from the administrators of nym.mixmin.net. Date: Tue Aug 25 00:44:38 2015 GMT From: flow(a)nym.mixmin.net -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iEYEARECAAYFAlXbunYACgkQViYZwngkfDtL5wCgpFYYT87OjDJ3B3VIF51QCiWp d4sAnisyEo3f5AzAeqkzQwsBBpKkWpDa =6mxf -----END PGP SIGNATURE-----

3 3

[arch-general] Process 13696 (systemctl) of user 0 dumped core ??
by David C. Rankin 24 Aug '15

24 Aug '15

All, After bandaiding my server back together by putting a 4-port pci-sata controller in it to work around the failed onboard disk controller, the system is up and running fine. In the BIOS, currently the onboard sata controller is 'Enabled', but each of the sata ports is 'Disabled'. When I check the status of something with systemclt, I get an odd error at the end of each command, eg: [15:47 phoinix:~/.ssh] # sc status smbd ● smbd.service - Samba SMB/CIFS server Loaded: loaded (/usr/lib/systemd/system/smbd.service; enabled; vendor preset: disabled) Active: active (running) since Sat 2015-08-22 22:57:26 CDT; 1 day 16h ago Main PID: 542 (smbd) CGroup: /system.slice/smbd.service ├─542 /usr/bin/smbd -D └─559 /usr/bin/smbd -D Bus error (core dumped) Looking at the journal and looking at the core dumps, the only other process that is implicated is: Cannot add dependency job for unit cups.socket, ignoring: Unit cups.socket failed to load: No such file or directory. Nothing else is generating a core dump. But each time I check the status of a process, it ends with: Bus error (core dumped) The only other thing I see in the journal that may or may not be related is: Aug 24 14:21:58 phoinix systemd[13187]: pam_unix(systemd-user:session): session opened for user root by (uid=0) Aug 24 14:21:58 phoinix systemd[13187]: Unit type .busname is not supported on this system. I don't know if that's related, but it was the only thing else tangentially related to 'bus'. Looking at the core dump list with 'coredumpctl list' show a handful of files: [17:46 phoinix:~/.ssh] # coredumpctl list TIME PID UID GID SIG PRESENT EXE Mon 2015-04-06 19:00:15 CDT 342 0 0 11 /usr/bin/cupsd Tue 2015-05-26 13:15:01 CDT 23265 0 0 11 /usr/bin/crond Tue 2015-05-26 14:01:01 CDT 23563 0 0 11 /usr/bin/crond Tue 2015-05-26 14:05:01 CDT 23593 0 0 11 /usr/bin/crond Sun 2015-08-23 05:51:43 CDT 3151 0 0 7 * /usr/bin/systemctl Sun 2015-08-23 05:52:16 CDT 3179 0 0 7 * /usr/bin/systemctl Sun 2015-08-23 07:11:33 CDT 3639 0 0 7 * /usr/bin/systemctl Sun 2015-08-23 07:12:31 CDT 3652 0 0 7 * /usr/bin/systemctl Mon 2015-08-24 15:30:11 CDT 13565 0 0 7 * /usr/bin/systemctl Mon 2015-08-24 15:32:05 CDT 13580 0 0 7 * /usr/bin/systemctl Mon 2015-08-24 15:53:37 CDT 13696 0 0 7 * /usr/bin/systemctl Looking at the dumps in gdb shows: [17:47 phoinix:~/.ssh] # coredumpctl gdb 13696 PID: 13696 (systemctl) UID: 0 (root) GID: 0 (root) Signal: 7 (BUS) Timestamp: Mon 2015-08-24 15:53:37 CDT (1h 54min ago) Command Line: systemctl status smbd Executable: /usr/bin/systemctl Control Group: /user.slice/user-1000.slice/session-c2.scope Unit: session-c2.scope Slice: user-1000.slice Session: c2 Owner UID: 1000 (david) Boot ID: aeecdf7479ea4b43aae7f1b9b83b2502 Machine ID: 8d32bcc3152b4a1f87c4d71f948f93fb Hostname: phoinix Coredump: /var/lib/systemd/coredump/core.systemctl.0.aeecdf7479ea4b43aae7f1b9b83b2502.13696.1440449617000000.lz4 Message: Process 13696 (systemctl) of user 0 dumped core. <snip> (gdb) bt #0 0x00007f353981becf in ?? () #1 0x00007f3539801c09 in ?? () #2 0x00007f3539801d38 in ?? () #3 0x00007f3539801b64 in ?? () #4 0x00007f3539801d38 in ?? () #5 0x00007f3539801b64 in ?? () #6 0x00007f353980310e in ?? () #7 0x00007f35397f4080 in ?? () #8 0x00007f353983340b in ?? () #9 0x00007f35397ed1d1 in ?? () #10 0x00007f35397e2414 in ?? () #11 0x00007f35386f5790 in __libc_start_main () from /usr/lib/libc.so.6 #12 0x00007f35397e3049 in ?? () (gdb) frame 0 #0 0x00007f353981becf in ?? () (gdb) info frame Stack level 0, frame at 0x7ffed3907080: rip = 0x7f353981becf; saved rip = 0x7f3539801c09 called by frame at 0x7ffed3907160 Arglist at 0x7ffed3906fd8, args: Locals at 0x7ffed3906fd8, Previous frame's sp is 0x7ffed3907080 Saved registers: rbx at 0x7ffed3907048, rbp at 0x7ffed3907050, r12 at 0x7ffed3907058, r13 at 0x7ffed3907060, r14 at 0x7ffed3907068, r15 at 0x7ffed3907070, rip at 0x7ffed3907078 (gdb) quit I haven't seen or noticed this happening before, but obviously the first core dump was back in April related to cups. The question is "What should I check?" and "Does any of this look related to BIOS settings and the new disk controller?" (that looks more doubtful after looking over all the information) Anybody have experience with this type thing? -- David C. Rankin, J.D.,P.E.

2 3

[arch-general] unable to load virtualbox kernel module
by James 24 Aug '15

24 Aug '15

I just installed virtualbox yesterday and I rebooted and can't load the kernel module. I reinstalled the package: $ sudo pacman -S virtualbox-host-modules > (1/1) reinstalling virtualbox-host-modules > [######################] 100% > In order to use the new version, reload all virtualbox modules manually. > $ sudo insmod vboxdrv > insmod: ERROR: could not load module vboxdrv: No such file or directory

2 2

[arch-general] Realtek 8111/8168/8411 Blues - cannot get dhcpcd address (link UP)
by David C. Rankin 24 Aug '15

24 Aug '15

All, As a continuation of the disc controller failure/system rebuild, I have the new box built and a pair of fresh drives waiting for a new Arch install. This motherboard has the Realtek 8111/8168/8411 chipset. (Gigabyte GA-990FXA-UD3 motherboard). I am booting with the latest install medium which boots fine in legacy or EUFI mode. No matter what I do, I cannot get an IPv4 address. I have read: https://wiki.archlinux.org/index.php/Network_configuration#Realtek_no_link_… (that's not the problem, link light is on, activity indicator is flashing, and link is reported 'Up' by 'ip link') I have read: https://wiki.archlinux.org/index.php/Network_configuration#Realtek_RTL8111.… - installed (pacman -U r8168-8.040.00-5-x86_64.pkg.tar.xz) - blacklisted r8169 - loaded r8168 - confirmed the NIC is using r8168 w/lspci -v - systemctl restart dhcpcd (many times) - systemctl status dhcpcd reports no IPv6 Routers no IPv4 Leases request timeout It's not the cable or my dhcpd server, I boot the box with the failed disc controller, and it is assigned an address just fine. (same cable) I'm stuck, looking at the log on my dhcp server, the requests are never seen. It's like the card isn't sending, but the link light is fine and the activity light on the NIC is flashes when it sees traffic? What else can I try? -- David C. Rankin, J.D.,P.E.

4 10