March 2018 - Arch-general - lists.archlinux.org

[arch-general] gtk-sharp-2 conflicts with gtk#
by Morgan Adamiec 22 Mar '18

22 Mar '18

I was doing some packing parsing and my parser failed to parse gtk-sharp-2 from extra. Turns out it's because gtk-sharp-2 conflicts with gtk# and my parser refuses to parse it because of man PKGBUILD stating: PKGNAME: Valid characters for members of this array are alphanumerics, and any of the following characters: “@ . _ + -”. Additionally, names are not allowed to start with hyphens or dots. Now that's for pgkname but I assume that would extend to conflicts and provides or am I mistaken? I'm guessing gtk# used to be a package before those rules were defined and has since been removed. If that's the case I realise that the conflict needs to be there for people who still have gtk# installed. But then again you now have a package in your repos have break your own standards. I don't know if its a good idea to remove that conflict, that's up to the devs. Would just like to know what you think before i go and patch the parser to allow '#'.

3 3

[arch-general] Re-install of Arch on a larger drive
by Trey Sizemore 19 Mar '18

19 Mar '18

Hi all- I currently have Arch running on a 250GB drive, and I'm going to be moving to a 500GB drive. I'm looking for 'best practices' when it comes to the migrating as much as possible during the re-install. It appears that I can migrate my installed packages (standard and AUR repos) via: pacman -Qqe > pkglist.txt and then on the new install, I can use the pkglist.txt generated previously to: pacman -S - < pkglist.txt In addition, by backing up and migrating much of my /home partition (to include 'hidden' config files, anything else I could do to make the process fast and as close to the current install as possible? Thanks!

15 24

[arch-general] Update to 4.15.8 on dual quad-core box locked on ( 3/16) Install DKMS modules, need help resurecting
by David C. Rankin 17 Mar '18

17 Mar '18

All, I experienced a hard lockup during kernel update to 4.15.8 on a Supermicro Dual Opteron Quad-core box. I've updated this box 50 times without issue, but something caused a hardlock. The filesystems are on mdadm linux-raid 1 partitions. The hardlock occurred after the packages were installed and it was in postprocessing at: ( 3/16) Install DKMS modules Now on boot I receive: Warning: /lib/modules/4.15.8-1-ARCH/modules.devname not found - ignoring starting version 237 ERROR: devide `UUID=c7492ac0-e805...` not found. Skipping fsck. mount: /new_root: can't find UUID UUID=c7492ac0-e805... You are being dropped into an emergency shell. sh: can't access tty; job control turned off [rootfs ]# (and the box hardlocks) So I downloaded the 201803 iso to try and fix the box. I have to boot from CD, since this box does not boot from USB. So I burn the .iso to CD (making sure the CD Label is `ARCH_201803`) and boot the box again in attempt to fix it: All goes well until... :: Mounting '/dev/disk/by-label/ARCH_201803' to '/run/archiso/bootmnt' Waiting 30 seconds for device /dev/disk/by-label/ARCH_201803 ... ERROR: '/dev/disk/by-label/ARCH_201803' device did not show up after 30 seconds ... Falling back to interactive prompt You can try to fix the problem manually, log out when you are finished sh: can't access tty; job control tuned off [rootfs ]# (thankfully this prompt is not hardlocked) This is bizarre, I've created the iso, sha1sums are correct, CD label is 'ARCH_201803', but the iso won't boot. I've researched, but these solutions don't solve the problem: https://bbs.archlinux.org/viewtopic.php?id=195671 https://superuser.com/questions/519784/error-installing-arch-linux https://bugs.launchpad.net/bugs/1318400 Check /dev/disk from the recovery prompt, there is no "by-label" directory under /dev/disk to begin with. Attempting to create 'by-label' and softlinking /dev/sr0 to /dev/disk/by-label/ARCH_201803 does create a series of additional errors I/O errors concluding with, mount: /run/archiso/bootmnt: wrong fs type, bad option, bad superblock on /dev/sr0, missing codepage or helper system .... So I'm snakebit and need help. I've never had the system lock during kernel update before and it has left part of the system thinking it has 4.15.7 and the rest thinking it is 4.15.8 (but the 4.15.8 update never finished) (1) How do I go about recovering? 4.15.7 was A-OK. I'm not sure what part of the install is still 4.15.7 and what's 4.15.8. 59 packages were updated, including the kernel and lts-kernel, but the initramfs was never regenerated due to the failure at the 'Install DKMS modules' phase. If I can get the ARCH_201803 install media to boot properly -- what next? (2) How do I get around the ERROR: '/dev/disk/by-label/ARCH_201803' device did not show up after 30 seconds problem? The disk label is correct, it's just not being seen and mounted by the installer to /run/archiso/bootmnt Any help greatly appreciated. -- David C. Rankin, J.D.,P.E.

7 17

Re: [arch-general] bz [was gcc broken]
by Carsten Mattner 17 Mar '18

17 Mar '18

On 3/16/18, Jelle van der Waa <jelle(a)vdwaa.nl> wrote: > On 03/15/18 at 09:29pm, Carsten Mattner via arch-general wrote: >> On 3/15/18, Eli Schwartz via arch-general <arch-general(a)archlinux.org> >> wrote: >> >> > Good news, I guess, is that we will almost certainly switch to bugzilla >> > as soon as Harmony brings stable psgi support (Soon™). >> >> Harmony? >> PSGI? >> >> I like Bugzilla's features, and I don't use arch's tracker enough to have >> a voice, or maintain it to have a say, but I would still like to provide >> an opinion. It's just an opinion. Having used large bugzilla >> installations >> like mozilla.org, kernel.org, freedesktop.org, it doesn't look like >> Bugzilla >> can be fast. I've found Mantis and to some extend Redmine to be fast and >> lean trackers. These may or may not suit Arch's needs, and I still have >> hope Bugzilla will at some point become snappy. >> >> Just an opinion based on experience, the arch admins/devs will know why >> bugzilla is the right choice. I trust them. > > Please don't de-rail the thread. (Obviously the Arch devs also want a > performing bugtracker, but Flyspray has to go either way) Sorry about that. I let my pain of disappointing bugzilla performance speak in the wrong context. Are the Arch devs looking for input on this in some ticket/forum? Like I said, I don't use it enough to care deeply, but I'm happy to provide experience report if needed.

2 1

[arch-general] gcc broken - Arch specific, applying optimization incorrectly - may explain unexplained problems
by David C. Rankin 16 Mar '18

16 Mar '18

Houston -- we have a problem. The problem is gcc is mis-applying optimizations, and it seems Arch specific. See discussion: [Why does not execute printf inside function?] https://stackoverflow.com/questions/49248787/why-does-not-execute-printf-in… The basic issue can be summarized in this short snippet: #include <stdio.h> int arr[10]; int func() { printf ("In func\n"); return 0; } int main (void) { if (&arr[func()]) printf("In main\n"); return 0; } Compile (with or without optimization) and the output on Archlinux (all packages current as of 1hr ago) and you get: $ ./bin/if2 In main That is wrong. `func()` has been completely optimized out of the procedure in main(). The assembly generated omits any call to func. (full assembly posted as part of the answer on SO) Debian gcc 7.3 does not exhibit this same behavior. I do not know where to start looking to find why this is happening, but it does not take much of a stretch to see how this could be the root cause of some of the "unexplained" errors I and others have seen in the past few days on Arch. Let me know if I need to file a bug here. Since it "works on Debian" and not here, I suspect the bug should start here and so the default optimization we package with can be eliminated. What say the devs? -- David C. Rankin, J.D.,P.E.

7 16

[arch-general] KDE - desktop shortcuts, desktop effects lost on latest update?
by David C. Rankin 15 Mar '18

15 Mar '18

All, I don't know if this is KDE or Arch, but on update to KDE Frameworks 5.44 and Qt 5.10, much of the desktop keyboard shortcuts I had for next->desktop, window->next->desktop, etc.. are just gone. Also gone are the desktop effect for "Minimize" (the old wobbly windows), and the Desktop Cube no longer has default activation (which was ctrl+f11 and the variants for sphere, etc... It appears those effects and the other shortcut keys were just removed from KDE. Has anybody else experienced this? This is on a spare drive to my laptop that I use infrequently, with 30 - 60 days between drive installs and updates. Best I can recall they were working fine around the beginning of the year, but now it was just like they were not there today. The dialog for the minimize effect is gone completely. The Desktop Cube can still be selected for paging, but the control key combination no longer invoke that animation? It's like they were ditched by Plasma. Were these deprecated with some kind of notice somewhere? I've checked kde.org, and searched, but did not find any notice that they had been removed. Anyone notice anything similar? -- David C. Rankin, J.D.,P.E.

1 0

[arch-general] Xorg crashes
by Peter Nabbefeld 15 Mar '18

15 Mar '18

Hello all, since yesterday, Xorg sometimes crashes unexpectedly. Please, see log below. I'm not sure, but I'm using Firefox most time, and Xorg crashes while I'm using Firefox. I'm no expert, but on a first glance, it seems to me like my touchpad accumulates mouse movements and so the input device gives the wrong coordinates to FF which in turn hands them to Xorg which leads to crashes. But of course, I may be totally wrong with this assumption. Kind regards Peter [ 213.002] X.Org X Server 1.19.6 Release Date: 2017-12-20 [ 213.002] X Protocol Version 11, Revision 0 [ 213.002] Build Operating System: Linux 4.14.12-1-ARCH x86_64 [ 213.002] Current Operating System: Linux tuchola 4.15.8-1-ARCH #1 SMP PREEMPT Sat Mar 10 00:00:33 UTC 2018 x86_64 [ 213.002] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=e81ed24f-26ef-4220-832a-56c374907fb0 rw quiet rcutree.rcu_idle_gp_delay=1 [ 213.002] Build Date: 26 January 2018 10:25:18AM [ 213.002] [ 213.002] Current version of pixman: 0.34.0 [ 213.002] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 213.002] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 213.003] (==) Log file: "/home/peter/.local/share/xorg/Xorg.0.log", Time: Mon Mar 12 14:49:32 2018 [ 213.076] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 213.076] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 213.146] (==) No Layout section. Using the first Screen section. [ 213.146] (==) No screen section available. Using defaults. [ 213.146] (**) |-->Screen "Default Screen Section" (0) [ 213.146] (**) | |-->Monitor "<default monitor>" [ 213.168] (==) No device specified for screen "Default Screen Section". Using the first device section listed. [ 213.168] (**) | |-->Device "Intel Graphics" [ 213.168] (**) | |-->GPUDevice "Nvidia card" [ 213.168] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 213.168] (==) Automatically adding devices [ 213.168] (==) Automatically enabling devices [ 213.168] (==) Automatically adding GPU devices [ 213.168] (==) Automatically binding GPU devices [ 213.168] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 213.222] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/". [ 213.222] Entry deleted from font path. [ 213.222] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/"). [ 213.222] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/". [ 213.222] Entry deleted from font path. [ 213.222] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/"). [ 213.222] (==) FontPath set to: /usr/share/fonts/misc/, /usr/share/fonts/TTF/, /usr/share/fonts/OTF/, /usr/share/fonts/Type1/ [ 213.222] (==) ModulePath set to "/usr/lib/xorg/modules" [ 213.222] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 213.222] (II) Loader magic: 0x55ed101fbd60 [ 213.222] (II) Module ABI versions: [ 213.222] X.Org ANSI C Emulation: 0.4 [ 213.222] X.Org Video Driver: 23.0 [ 213.222] X.Org XInput driver : 24.1 [ 213.222] X.Org Server Extension : 10.0 [ 213.223] (++) using VT number 1 [ 213.223] (--) controlling tty is VT number 1, auto-enabling KeepTty [ 213.224] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1 [ 213.225] (II) xfree86: Adding drm device (/dev/dri/card1) [ 213.225] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 11 paused 0 [ 213.226] (II) xfree86: Adding drm device (/dev/dri/card0) [ 213.226] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 12 paused 0 [ 213.228] (--) PCI:*(0:0:2:0) 8086:0416:1558:7481 rev 6, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072 [ 213.228] (--) PCI: (0:1:0:0) 10de:119a:1558:7481 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288 [ 213.228] (II) Open ACPI successful (/var/run/acpid.socket) [ 213.228] (II) LoadModule: "glx" [ 213.247] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 213.298] (II) Module glx: vendor="X.Org Foundation" [ 213.298] compiled for 1.19.6, module version = 1.0.0 [ 213.298] ABI class: X.Org Server Extension, version 10.0 [ 213.298] (II) LoadModule: "intel" [ 213.298] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 213.325] (II) Module intel: vendor="X.Org Foundation" [ 213.325] compiled for 1.19.6, module version = 2.99.917 [ 213.325] Module class: X.Org Video Driver [ 213.325] ABI class: X.Org Video Driver, version 23.0 [ 213.325] (II) LoadModule: "nouveau" [ 213.325] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so [ 213.350] (II) Module nouveau: vendor="X.Org Foundation" [ 213.350] compiled for 1.19.3, module version = 1.0.15 [ 213.350] Module class: X.Org Video Driver [ 213.350] ABI class: X.Org Video Driver, version 23.0 [ 213.350] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43 [ 213.350] (II) intel: Driver for Intel(R) HD Graphics [ 213.350] (II) intel: Driver for Intel(R) Iris(TM) Graphics [ 213.350] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics [ 213.350] (II) NOUVEAU driver [ 213.350] (II) NOUVEAU driver for NVIDIA chipset families : [ 213.350] RIVA TNT (NV04) [ 213.350] RIVA TNT2 (NV05) [ 213.350] GeForce 256 (NV10) [ 213.350] GeForce 2 (NV11, NV15) [ 213.350] GeForce 4MX (NV17, NV18) [ 213.350] GeForce 3 (NV20) [ 213.350] GeForce 4Ti (NV25, NV28) [ 213.350] GeForce FX (NV3x) [ 213.350] GeForce 6 (NV4x) [ 213.350] GeForce 7 (G7x) [ 213.350] GeForce 8 (G8x) [ 213.350] GeForce GTX 200 (NVA0) [ 213.350] GeForce GTX 400 (NVC0) [ 213.351] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted) [ 213.366] (II) [drm] nouveau interface version: 1.3.1 [ 213.366] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support [ 213.366] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 213.366] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 213.366] (==) intel(0): RGB weight 888 [ 213.366] (==) intel(0): Default visual is TrueColor [ 213.366] (**) intel(0): Option "AccelMethod" "uxa" [ 213.366] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4600 [ 213.366] (**) intel(0): Relaxed fencing enabled [ 213.366] (**) intel(0): Wait on SwapBuffers? enabled [ 213.366] (**) intel(0): Triple buffering? enabled [ 213.366] (**) intel(0): Framebuffer tiled [ 213.366] (**) intel(0): Pixmaps tiled [ 213.366] (**) intel(0): 3D buffers tiled [ 213.366] (**) intel(0): SwapBuffers wait enabled [ 213.366] (==) intel(0): video overlay key set to 0x101fe [ 213.367] (II) intel(0): Output eDP1 has no monitor section [ 213.368] (--) intel(0): found backlight control interface intel_backlight [ 213.368] (II) intel(0): Output DP1 has no monitor section [ 213.376] (II) intel(0): Output HDMI1 has no monitor section [ 213.384] (II) intel(0): Output HDMI2 has no monitor section [ 213.384] (II) intel(0): Output DP2 has no monitor section [ 213.392] (II) intel(0): Output HDMI3 has no monitor section [ 213.393] (II) intel(0): EDID for output eDP1 [ 213.393] (II) intel(0): Manufacturer: CMO Model: 1720 Serial#: 0 [ 213.393] (II) intel(0): Year: 2011 Week: 2 [ 213.393] (II) intel(0): EDID Version: 1.3 [ 213.393] (II) intel(0): Digital Display Input [ 213.393] (II) intel(0): Max Image Size [cm]: horiz.: 38 vert.: 21 [ 213.393] (II) intel(0): Gamma: 2.20 [ 213.393] (II) intel(0): No DPMS capabilities specified [ 213.393] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 213.393] (II) intel(0): First detailed timing is preferred mode [ 213.393] (II) intel(0): redX: 0.640 redY: 0.333 greenX: 0.303 greenY: 0.613 [ 213.393] (II) intel(0): blueX: 0.154 blueY: 0.060 whiteX: 0.313 whiteY: 0.329 [ 213.393] (II) intel(0): Manufacturer's mask: 0 [ 213.393] (II) intel(0): Supported detailed timing: [ 213.393] (II) intel(0): clock: 138.7 MHz Image Size: 382 x 215 mm [ 213.393] (II) intel(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0 [ 213.393] (II) intel(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0 [ 213.393] (II) intel(0): N173HGE-L11 [ 213.393] (II) intel(0): CMO [ 213.393] (II) intel(0): N173HGE-L11 [ 213.393] (II) intel(0): EDID (in hex): [ 213.393] (II) intel(0): 00ffffffffffff000daf201700000000 [ 213.393] (II) intel(0): 02150103802615780ad895a3554d9d27 [ 213.393] (II) intel(0): 0f505400000001010101010101010101 [ 213.393] (II) intel(0): 0101010101012e3680a070381f403020 [ 213.393] (II) intel(0): 35007ed710000018000000fe004e3137 [ 213.393] (II) intel(0): 334847452d4c31310a20000000fe0043 [ 213.393] (II) intel(0): 4d4f0a202020202020202020000000fe [ 213.393] (II) intel(0): 004e3137334847452d4c31310a20006e [ 213.393] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) [ 213.393] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 213.393] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 213.393] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) [ 213.393] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) [ 213.393] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) [ 213.393] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) [ 213.393] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) [ 213.393] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) [ 213.393] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) [ 213.393] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) [ 213.393] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) [ 213.393] (II) intel(0): Not using default mode "320x180" (doublescan mode not supported) [ 213.393] (II) intel(0): Not using default mode "320x180" (doublescan mode not supported) [ 213.393] (II) intel(0): Not using default mode "360x202" (doublescan mode not supported) [ 213.393] (II) intel(0): Not using default mode "360x202" (doublescan mode not supported) [ 213.393] (II) intel(0): Not using default mode "432x243" (doublescan mode not supported) [ 213.393] (II) intel(0): Not using default mode "432x243" (doublescan mode not supported) [ 213.393] (II) intel(0): Not using default mode "480x270" (doublescan mode not supported) [ 213.393] (II) intel(0): Not using default mode "480x270" (doublescan mode not supported) [ 213.393] (II) intel(0): Not using default mode "512x288" (doublescan mode not supported) [ 213.393] (II) intel(0): Not using default mode "512x288" (doublescan mode not supported) [ 213.393] (II) intel(0): Not using default mode "640x360" (doublescan mode not supported) [ 213.393] (II) intel(0): Not using default mode "640x360" (doublescan mode not supported) [ 213.393] (II) intel(0): Not using default mode "684x384" (doublescan mode not supported) [ 213.393] (II) intel(0): Not using default mode "684x384" (doublescan mode not supported) [ 213.393] (II) intel(0): Not using default mode "800x450" (doublescan mode not supported) [ 213.393] (II) intel(0): Not using default mode "800x450" (doublescan mode not supported) [ 213.393] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported) [ 213.393] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported) [ 213.393] (II) intel(0): Not using default mode "1024x576" (doublescan mode not supported) [ 213.393] (II) intel(0): Not using default mode "1024x576" (doublescan mode not supported) [ 213.393] (II) intel(0): Not using default mode "1280x720" (doublescan mode not supported) [ 213.393] (II) intel(0): Not using default mode "1280x720" (doublescan mode not supported) [ 213.393] (II) intel(0): Not using default mode "1440x810" (doublescan mode not supported) [ 213.393] (II) intel(0): Not using default mode "1440x810" (doublescan mode not supported) [ 213.393] (II) intel(0): Not using default mode "1600x900" (doublescan mode not supported) [ 213.393] (II) intel(0): Not using default mode "1600x900" (doublescan mode not supported) [ 213.393] (II) intel(0): Not using default mode "1920x1080" (doublescan mode not supported) [ 213.393] (II) intel(0): Not using default mode "1920x1080" (doublescan mode not supported) [ 213.393] (II) intel(0): Not using default mode "640x400" (doublescan mode not supported) [ 213.393] (II) intel(0): Not using default mode "640x400" (doublescan mode not supported) [ 213.393] (II) intel(0): Not using default mode "700x450" (doublescan mode not supported) [ 213.393] (II) intel(0): Not using default mode "700x450" (doublescan mode not supported) [ 213.393] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) [ 213.393] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) [ 213.393] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported) [ 213.393] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported) [ 213.393] (II) intel(0): Not using default mode "1280x800" (doublescan mode not supported) [ 213.393] (II) intel(0): Not using default mode "1280x800" (doublescan mode not supported) [ 213.393] (II) intel(0): Printing probed modes for output eDP1 [ 213.393] (II) intel(0): Modeline "1920x1080"x60.0 138.70 1920 1968 2000 2080 1080 1083 1088 1111 -hsync -vsync (66.7 kHz eP) [ 213.393] (II) intel(0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz d) [ 213.393] (II) intel(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz d) [ 213.393] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz d) [ 213.393] (II) intel(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz d) [ 213.393] (II) intel(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d) [ 213.393] (II) intel(0): Modeline "1600x900"x59.9 118.25 1600 1696 1856 2112 900 903 908 934 -hsync +vsync (56.0 kHz d) [ 213.394] (II) intel(0): Modeline "1600x900"x59.8 97.50 1600 1648 1680 1760 900 903 908 926 +hsync -vsync (55.4 kHz d) [ 213.394] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d) [ 213.394] (II) intel(0): Modeline "1400x900"x60.0 103.50 1400 1480 1624 1848 900 903 913 934 -hsync +vsync (56.0 kHz d) [ 213.394] (II) intel(0): Modeline "1400x900"x59.9 86.50 1400 1448 1480 1560 900 903 913 926 +hsync -vsync (55.4 kHz d) [ 213.394] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d) [ 213.394] (II) intel(0): Modeline "1368x768"x59.9 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync (47.8 kHz d) [ 213.394] (II) intel(0): Modeline "1368x768"x59.9 72.25 1368 1416 1448 1528 768 771 781 790 +hsync -vsync (47.3 kHz d) [ 213.394] (II) intel(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz d) [ 213.394] (II) intel(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz d) [ 213.394] (II) intel(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz d) [ 213.394] (II) intel(0): Modeline "1280x720"x59.7 63.75 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (44.3 kHz d) [ 213.394] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d) [ 213.394] (II) intel(0): Modeline "1024x576"x59.9 46.50 1024 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz d) [ 213.394] (II) intel(0): Modeline "1024x576"x59.8 42.00 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (35.5 kHz d) [ 213.394] (II) intel(0): Modeline "960x540"x59.6 40.75 960 992 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz d) [ 213.394] (II) intel(0): Modeline "960x540"x59.8 37.25 960 1008 1040 1120 540 543 548 556 +hsync -vsync (33.3 kHz d) [ 213.394] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d) [ 213.394] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d) [ 213.394] (II) intel(0): Modeline "864x486"x59.9 32.50 864 888 968 1072 486 489 494 506 -hsync +vsync (30.3 kHz d) [ 213.394] (II) intel(0): Modeline "864x486"x59.6 30.50 864 912 944 1024 486 489 494 500 +hsync -vsync (29.8 kHz d) [ 213.394] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d) [ 213.394] (II) intel(0): Modeline "720x405"x59.5 22.50 720 744 808 896 405 408 413 422 -hsync +vsync (25.1 kHz d) [ 213.394] (II) intel(0): Modeline "720x405"x59.0 21.75 720 768 800 880 405 408 413 419 +hsync -vsync (24.7 kHz d) [ 213.394] (II) intel(0): Modeline "640x360"x59.8 18.00 640 664 720 800 360 363 368 376 -hsync +vsync (22.5 kHz d) [ 213.394] (II) intel(0): Modeline "640x360"x59.3 17.75 640 688 720 800 360 363 368 374 +hsync -vsync (22.2 kHz d) [ 213.394] (II) intel(0): EDID for output DP1 [ 213.402] (II) intel(0): EDID for output HDMI1 [ 213.410] (II) intel(0): EDID for output HDMI2 [ 213.410] (II) intel(0): EDID for output DP2 [ 213.419] (II) intel(0): EDID for output HDMI3 [ 213.419] (II) intel(0): Output eDP1 connected [ 213.419] (II) intel(0): Output DP1 disconnected [ 213.419] (II) intel(0): Output HDMI1 disconnected [ 213.419] (II) intel(0): Output HDMI2 disconnected [ 213.419] (II) intel(0): Output DP2 disconnected [ 213.419] (II) intel(0): Output HDMI3 disconnected [ 213.419] (II) intel(0): Using exact sizes for initial modes [ 213.419] (II) intel(0): Output eDP1 using initial mode 1920x1080 +0+0 [ 213.419] (II) intel(0): Kernel page flipping support detected, enabling [ 213.419] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) [ 213.419] (==) intel(0): DPI set to (96, 96) [ 213.419] (II) Loading sub module "fb" [ 213.419] (II) LoadModule: "fb" [ 213.419] (II) Loading /usr/lib/xorg/modules/libfb.so [ 213.433] (II) Module fb: vendor="X.Org Foundation" [ 213.433] compiled for 1.19.6, module version = 1.0.0 [ 213.433] ABI class: X.Org ANSI C Emulation, version 0.4 [ 213.433] (II) Loading sub module "dri2" [ 213.433] (II) LoadModule: "dri2" [ 213.433] (II) Module "dri2" already built-in [ 213.433] (II) Loading sub module "dri3" [ 213.433] (II) LoadModule: "dri3" [ 213.433] (II) Module "dri3" already built-in [ 213.433] (II) Loading sub module "dri2" [ 213.433] (II) LoadModule: "dri2" [ 213.433] (II) Module "dri2" already built-in [ 213.433] (--) NOUVEAU(G0): Chipset: "NVIDIA NVE4" [ 213.433] (==) NOUVEAU(G0): Depth 24, (--) framebuffer bpp 32 [ 213.433] (==) NOUVEAU(G0): RGB weight 888 [ 213.433] (==) NOUVEAU(G0): Default visual is TrueColor [ 213.433] (==) NOUVEAU(G0): Using HW cursor [ 213.433] (==) NOUVEAU(G0): Allowed maximum DRI level 2. [ 213.433] (==) NOUVEAU(G0): GLX sync to VBlank enabled. [ 213.433] (==) NOUVEAU(G0): Page flipping enabled [ 213.433] (==) NOUVEAU(G0): Swap limit set to 1 [Max allowed 2] [ 213.433] (==) NOUVEAU(G0): Page flipping synced to vblank by kernel. [ 213.433] (==) NOUVEAU(G0): Using gamma correction (1.0, 1.0, 1.0) [ 213.433] (--) NOUVEAU(G0): Virtual size is 1024x768 (pitch 0) [ 213.433] (**) NOUVEAU(G0): Mode "1920x1080": 173.0 MHz (scaled from 0.0 MHz), 67.2 kHz, 60.0 Hz [ 213.433] (II) NOUVEAU(G0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz) [ 213.433] (==) NOUVEAU(G0): DPI set to (96, 96) [ 213.433] (II) Loading sub module "fb" [ 213.433] (II) LoadModule: "fb" [ 213.433] (II) Loading /usr/lib/xorg/modules/libfb.so [ 213.434] (II) Module fb: vendor="X.Org Foundation" [ 213.434] compiled for 1.19.6, module version = 1.0.0 [ 213.434] ABI class: X.Org ANSI C Emulation, version 0.4 [ 213.434] (II) Loading sub module "shadowfb" [ 213.434] (II) LoadModule: "shadowfb" [ 213.434] (II) Loading /usr/lib/xorg/modules/libshadowfb.so [ 213.438] (II) Module shadowfb: vendor="X.Org Foundation" [ 213.438] compiled for 1.19.6, module version = 1.0.0 [ 213.438] ABI class: X.Org ANSI C Emulation, version 0.4 [ 213.438] (==) Depth 24 pixmap format is 32 bpp [ 213.697] (II) NOUVEAU(G0): Channel setup complete. [ 213.697] (II) NOUVEAU(G0): [COPY] async initialised. [ 213.717] (II) NOUVEAU(G0): Hardware support for Present enabled [ 213.717] (II) NOUVEAU(G0): [DRI2] Setup complete [ 213.717] (II) NOUVEAU(G0): [DRI2] DRI driver: nouveau [ 213.717] (II) NOUVEAU(G0): [DRI2] VDPAU driver: nouveau [ 213.717] (II) Loading sub module "exa" [ 213.717] (II) LoadModule: "exa" [ 213.717] (II) Loading /usr/lib/xorg/modules/libexa.so [ 213.732] (II) Module exa: vendor="X.Org Foundation" [ 213.732] compiled for 1.19.6, module version = 2.6.0 [ 213.732] ABI class: X.Org Video Driver, version 23.0 [ 213.732] (II) EXA(256): Driver allocated offscreen pixmaps [ 213.732] (II) EXA(256): Driver registered support for the following operations: [ 213.732] (II) Solid [ 213.732] (II) Copy [ 213.732] (II) Composite (RENDER acceleration) [ 213.732] (II) UploadToScreen [ 213.732] (II) DownloadFromScreen [ 213.732] (==) NOUVEAU(G0): Backing store enabled [ 213.732] (==) NOUVEAU(G0): Silken mouse enabled [ 213.732] (II) NOUVEAU(G0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video. [ 213.732] (II) NOUVEAU(G0): [XvMC] Extension initialized. [ 213.732] (==) NOUVEAU(G0): DPMS enabled [ 213.732] (II) NOUVEAU(G0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 213.733] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled [ 213.734] (II) UXA(0): Driver registered support for the following operations: [ 213.734] (II) solid [ 213.734] (II) copy [ 213.734] (II) composite (RENDER acceleration) [ 213.734] (II) put_image [ 213.734] (II) get_image [ 213.734] (II) intel(0): [DRI2] Setup complete [ 213.734] (II) intel(0): [DRI2] DRI driver: i965 [ 213.734] (II) intel(0): [DRI2] VDPAU driver: va_gl [ 213.734] (==) intel(0): Backing store enabled [ 213.734] (==) intel(0): Silken mouse enabled [ 213.734] (II) intel(0): Initializing HW Cursor [ 213.734] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 213.734] (==) intel(0): DPMS enabled [ 213.734] (==) intel(0): Intel XvMC decoder enabled [ 213.734] (II) intel(0): Set up textured video [ 213.734] (II) intel(0): [XvMC] xvmc_vld driver initialized. [ 213.734] (II) intel(0): DRI2: Enabled [ 213.734] (II) intel(0): DRI3: Enabled [ 213.734] (==) intel(0): hotplug detection: "enabled" [ 213.767] (--) RandR disabled [ 214.004] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 214.004] (II) AIGLX: enabled GLX_ARB_create_context [ 214.004] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 214.004] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile [ 214.004] (II) AIGLX: enabled GLX_INTEL_swap_event [ 214.004] (II) AIGLX: enabled GLX_SGI_swap_control [ 214.004] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB [ 214.004] (II) AIGLX: enabled GLX_ARB_fbconfig_float [ 214.004] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float [ 214.004] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 214.004] (II) AIGLX: enabled GLX_ARB_create_context_robustness [ 214.004] (II) AIGLX: Loaded and initialized i965 [ 214.004] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 214.005] (II) NOUVEAU(G0): NVEnterVT is called. [ 214.005] (II) intel(0): Setting screen physical size to 508 x 285 [ 214.281] (II) config/udev: Adding input device Power Button (/dev/input/event3) [ 214.281] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 214.281] (**) Power Button: Applying InputClass "system-keyboard" [ 214.281] (II) LoadModule: "libinput" [ 214.281] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so [ 214.332] (II) Module libinput: vendor="X.Org Foundation" [ 214.332] compiled for 1.19.3, module version = 0.26.0 [ 214.332] Module class: X.Org XInput Driver [ 214.332] ABI class: X.Org XInput driver, version 24.1 [ 214.332] (II) Using input driver 'libinput' for 'Power Button' [ 214.332] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 22 paused 0 [ 214.332] (**) Power Button: always reports core events [ 214.332] (**) Option "Device" "/dev/input/event3" [ 214.332] (**) Option "_source" "server/udev" [ 214.333] (II) event3 - Power Button: is tagged by udev as: Keyboard [ 214.333] (II) event3 - Power Button: device is a keyboard [ 214.333] (II) event3 - Power Button: device removed [ 214.333] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3" [ 214.333] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 214.333] (**) Option "xkb_model" "nodeadkeys" [ 214.333] (**) Option "xkb_layout" "de" [ 214.374] (II) event3 - Power Button: is tagged by udev as: Keyboard [ 214.374] (II) event3 - Power Button: device is a keyboard [ 214.374] (II) config/udev: Adding input device Video Bus (/dev/input/event5) [ 214.374] (**) Video Bus: Applying InputClass "libinput keyboard catchall" [ 214.374] (**) Video Bus: Applying InputClass "system-keyboard" [ 214.374] (II) Using input driver 'libinput' for 'Video Bus' [ 214.375] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 25 paused 0 [ 214.375] (**) Video Bus: always reports core events [ 214.375] (**) Option "Device" "/dev/input/event5" [ 214.375] (**) Option "_source" "server/udev" [ 214.375] (II) event5 - Video Bus: is tagged by udev as: Keyboard [ 214.375] (II) event5 - Video Bus: device is a keyboard [ 214.375] (II) event5 - Video Bus: device removed [ 214.375] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input5/event5" [ 214.375] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 214.375] (**) Option "xkb_model" "nodeadkeys" [ 214.375] (**) Option "xkb_layout" "de" [ 214.376] (II) event5 - Video Bus: is tagged by udev as: Keyboard [ 214.376] (II) event5 - Video Bus: device is a keyboard [ 214.376] (II) config/udev: Adding input device Video Bus (/dev/input/event4) [ 214.376] (**) Video Bus: Applying InputClass "libinput keyboard catchall" [ 214.376] (**) Video Bus: Applying InputClass "system-keyboard" [ 214.376] (II) Using input driver 'libinput' for 'Video Bus' [ 214.376] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 26 paused 0 [ 214.376] (**) Video Bus: always reports core events [ 214.376] (**) Option "Device" "/dev/input/event4" [ 214.376] (**) Option "_source" "server/udev" [ 214.377] (II) event4 - Video Bus: is tagged by udev as: Keyboard [ 214.377] (II) event4 - Video Bus: device is a keyboard [ 214.377] (II) event4 - Video Bus: device removed [ 214.377] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:4d/LNXVIDEO:00/input/input4/event4" [ 214.377] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8) [ 214.377] (**) Option "xkb_model" "nodeadkeys" [ 214.377] (**) Option "xkb_layout" "de" [ 214.377] (II) event4 - Video Bus: is tagged by udev as: Keyboard [ 214.377] (II) event4 - Video Bus: device is a keyboard [ 214.377] (II) config/udev: Adding input device Power Button (/dev/input/event0) [ 214.377] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 214.377] (**) Power Button: Applying InputClass "system-keyboard" [ 214.377] (II) Using input driver 'libinput' for 'Power Button' [ 214.378] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 27 paused 0 [ 214.378] (**) Power Button: always reports core events [ 214.378] (**) Option "Device" "/dev/input/event0" [ 214.378] (**) Option "_source" "server/udev" [ 214.378] (II) event0 - Power Button: is tagged by udev as: Keyboard [ 214.378] (II) event0 - Power Button: device is a keyboard [ 214.378] (II) event0 - Power Button: device removed [ 214.378] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0" [ 214.378] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9) [ 214.378] (**) Option "xkb_model" "nodeadkeys" [ 214.378] (**) Option "xkb_layout" "de" [ 214.378] (II) event0 - Power Button: is tagged by udev as: Keyboard [ 214.378] (II) event0 - Power Button: device is a keyboard [ 214.379] (II) config/udev: Adding input device Lid Switch (/dev/input/event2) [ 214.379] (II) No input driver specified, ignoring this device. [ 214.379] (II) This device may have been added with another device file. [ 214.379] (II) config/udev: Adding input device Sleep Button (/dev/input/event1) [ 214.379] (**) Sleep Button: Applying InputClass "libinput keyboard catchall" [ 214.379] (**) Sleep Button: Applying InputClass "system-keyboard" [ 214.379] (II) Using input driver 'libinput' for 'Sleep Button' [ 214.379] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 28 paused 0 [ 214.379] (**) Sleep Button: always reports core events [ 214.379] (**) Option "Device" "/dev/input/event1" [ 214.379] (**) Option "_source" "server/udev" [ 214.380] (II) event1 - Sleep Button: is tagged by udev as: Keyboard [ 214.380] (II) event1 - Sleep Button: device is a keyboard [ 214.380] (II) event1 - Sleep Button: device removed [ 214.380] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1" [ 214.380] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10) [ 214.380] (**) Option "xkb_model" "nodeadkeys" [ 214.380] (**) Option "xkb_layout" "de" [ 214.380] (II) event1 - Sleep Button: is tagged by udev as: Keyboard [ 214.380] (II) event1 - Sleep Button: device is a keyboard [ 214.381] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event17) [ 214.381] (II) No input driver specified, ignoring this device. [ 214.381] (II) This device may have been added with another device file. [ 214.381] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event18) [ 214.381] (II) No input driver specified, ignoring this device. [ 214.381] (II) This device may have been added with another device file. [ 214.381] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event19) [ 214.381] (II) No input driver specified, ignoring this device. [ 214.381] (II) This device may have been added with another device file. [ 214.382] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=9 (/dev/input/event20) [ 214.382] (II) No input driver specified, ignoring this device. [ 214.382] (II) This device may have been added with another device file. [ 214.382] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=10 (/dev/input/event21) [ 214.382] (II) No input driver specified, ignoring this device. [ 214.382] (II) This device may have been added with another device file. [ 214.383] (II) config/udev: Adding input device BisonCam, NB Pro: BisonCam, NB (/dev/input/event16) [ 214.383] (**) BisonCam, NB Pro: BisonCam, NB : Applying InputClass "libinput keyboard catchall" [ 214.383] (**) BisonCam, NB Pro: BisonCam, NB : Applying InputClass "system-keyboard" [ 214.383] (II) Using input driver 'libinput' for 'BisonCam, NB Pro: BisonCam, NB ' [ 214.383] (II) systemd-logind: got fd for /dev/input/event16 13:80 fd 29 paused 0 [ 214.383] (**) BisonCam, NB Pro: BisonCam, NB : always reports core events [ 214.383] (**) Option "Device" "/dev/input/event16" [ 214.383] (**) Option "_source" "server/udev" [ 214.384] (II) event16 - BisonCam, NB Pro: BisonCam, NB : is tagged by udev as: Keyboard [ 214.384] (II) event16 - BisonCam, NB Pro: BisonCam, NB : device is a keyboard [ 214.384] (II) event16 - BisonCam, NB Pro: BisonCam, NB : device removed [ 214.384] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/input/input23/event16" [ 214.384] (II) XINPUT: Adding extended input device "BisonCam, NB Pro: BisonCam, NB " (type: KEYBOARD, id 11) [ 214.384] (**) Option "xkb_model" "nodeadkeys" [ 214.384] (**) Option "xkb_layout" "de" [ 214.385] (II) event16 - BisonCam, NB Pro: BisonCam, NB : is tagged by udev as: Keyboard [ 214.385] (II) event16 - BisonCam, NB Pro: BisonCam, NB : device is a keyboard [ 214.385] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event7) [ 214.385] (**) Logitech USB Receiver: Applying InputClass "libinput pointer catchall" [ 214.385] (II) Using input driver 'libinput' for 'Logitech USB Receiver' [ 214.386] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 30 paused 0 [ 214.386] (**) Logitech USB Receiver: always reports core events [ 214.386] (**) Option "Device" "/dev/input/event7" [ 214.386] (**) Option "_source" "server/udev" [ 214.386] (II) event7 - Logitech USB Receiver: is tagged by udev as: Mouse [ 214.386] (II) event7 - Logitech USB Receiver: device is a pointer [ 214.386] (II) event7 - Logitech USB Receiver: device removed [ 214.386] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/0003:046D:C52F.0001/input/input11/event7" [ 214.386] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 12) [ 214.386] (**) Option "AccelerationScheme" "none" [ 214.386] (**) Logitech USB Receiver: (accel) selected scheme none/0 [ 214.386] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000 [ 214.386] (**) Logitech USB Receiver: (accel) acceleration threshold: 4 [ 214.387] (II) event7 - Logitech USB Receiver: is tagged by udev as: Mouse [ 214.387] (II) event7 - Logitech USB Receiver: device is a pointer [ 214.387] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0) [ 214.387] (II) No input driver specified, ignoring this device. [ 214.387] (II) This device may have been added with another device file. [ 214.388] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event8) [ 214.388] (**) Logitech USB Receiver: Applying InputClass "libinput keyboard catchall" [ 214.388] (**) Logitech USB Receiver: Applying InputClass "system-keyboard" [ 214.388] (II) Using input driver 'libinput' for 'Logitech USB Receiver' [ 214.388] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 31 paused 0 [ 214.388] (**) Logitech USB Receiver: always reports core events [ 214.388] (**) Option "Device" "/dev/input/event8" [ 214.388] (**) Option "_source" "server/udev" [ 214.388] (II) event8 - Logitech USB Receiver: is tagged by udev as: Keyboard [ 214.388] (II) event8 - Logitech USB Receiver: device is a keyboard [ 214.388] (II) event8 - Logitech USB Receiver: device removed [ 214.388] (II) libinput: Logitech USB Receiver: needs a virtual subdevice [ 214.388] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.1/0003:046D:C52F.0002/input/input12/event8" [ 214.388] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 13) [ 214.389] (**) Option "AccelerationScheme" "none" [ 214.389] (**) Logitech USB Receiver: (accel) selected scheme none/0 [ 214.389] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000 [ 214.389] (**) Logitech USB Receiver: (accel) acceleration threshold: 4 [ 214.389] (II) event8 - Logitech USB Receiver: is tagged by udev as: Keyboard [ 214.389] (II) event8 - Logitech USB Receiver: device is a keyboard [ 214.389] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event11) [ 214.389] (II) No input driver specified, ignoring this device. [ 214.389] (II) This device may have been added with another device file. [ 214.389] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12) [ 214.389] (II) No input driver specified, ignoring this device. [ 214.389] (II) This device may have been added with another device file. [ 214.390] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event13) [ 214.390] (II) No input driver specified, ignoring this device. [ 214.390] (II) This device may have been added with another device file. [ 214.390] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event14) [ 214.390] (II) No input driver specified, ignoring this device. [ 214.390] (II) This device may have been added with another device file. [ 214.390] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event15) [ 214.390] (II) No input driver specified, ignoring this device. [ 214.390] (II) This device may have been added with another device file. [ 214.390] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event6) [ 214.390] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall" [ 214.390] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard" [ 214.390] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard' [ 214.391] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 32 paused 0 [ 214.391] (**) AT Translated Set 2 keyboard: always reports core events [ 214.391] (**) Option "Device" "/dev/input/event6" [ 214.391] (**) Option "_source" "server/udev" [ 214.391] (II) event6 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard [ 214.391] (II) event6 - AT Translated Set 2 keyboard: device is a keyboard [ 214.391] (II) event6 - AT Translated Set 2 keyboard: device removed [ 214.391] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input6/event6" [ 214.391] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14) [ 214.391] (**) Option "xkb_model" "nodeadkeys" [ 214.391] (**) Option "xkb_layout" "de" [ 214.391] (II) event6 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard [ 214.391] (II) event6 - AT Translated Set 2 keyboard: device is a keyboard [ 214.392] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event10) [ 214.392] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall" [ 214.392] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "MyTouchpad" [ 214.392] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad' [ 214.392] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 33 paused 0 [ 214.392] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 214.392] (**) Option "Device" "/dev/input/event10" [ 214.392] (**) Option "_source" "server/udev" [ 214.392] (II) event10 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad [ 214.392] (II) event10 - SynPS/2 Synaptics TouchPad: device is a touchpad [ 214.392] (II) event10 - SynPS/2 Synaptics TouchPad: device removed [ 214.393] (**) Option "Tapping" "on" [ 214.393] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input15/event10" [ 214.393] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 15) [ 214.393] (**) Option "AccelerationScheme" "none" [ 214.393] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0 [ 214.393] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 [ 214.393] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 [ 214.393] (II) event10 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad [ 214.393] (II) event10 - SynPS/2 Synaptics TouchPad: device is a touchpad [ 214.393] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1) [ 214.393] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "MyTouchpad" [ 214.393] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad' [ 214.393] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 214.393] (**) Option "Device" "/dev/input/mouse1" [ 214.393] (**) Option "_source" "server/udev" [ 214.393] (EE) xf86OpenSerial: Cannot open device /dev/input/mouse1 Permission denied. [ 214.393] (II) mouse1: opening input device '/dev/input/mouse1' failed (Permission denied). [ 214.393] (II) mouse1 - failed to create input device '/dev/input/mouse1'. [ 214.393] (EE) libinput: SynPS/2 Synaptics TouchPad: Failed to create a device for /dev/input/mouse1 [ 214.393] (EE) PreInit returned 2 for "SynPS/2 Synaptics TouchPad" [ 214.393] (II) UnloadModule: "libinput" [ 214.394] (II) config/udev: Adding input device PC Speaker (/dev/input/event9) [ 214.394] (II) No input driver specified, ignoring this device. [ 214.394] (II) This device may have been added with another device file. [ 214.400] (**) Logitech USB Receiver: Applying InputClass "libinput keyboard catchall" [ 214.400] (**) Logitech USB Receiver: Applying InputClass "system-keyboard" [ 214.400] (II) Using input driver 'libinput' for 'Logitech USB Receiver' [ 214.400] (II) systemd-logind: returning pre-existing fd for /dev/input/event8 13:72 [ 214.400] (**) Logitech USB Receiver: always reports core events [ 214.400] (**) Option "Device" "/dev/input/event8" [ 214.400] (**) Option "_source" "_driver/libinput" [ 214.400] (II) libinput: Logitech USB Receiver: is a virtual subdevice [ 214.400] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.1/0003:046D:C52F.0002/input/input12/event8" [ 214.400] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 16) [ 214.400] (**) Option "xkb_model" "nodeadkeys" [ 214.400] (**) Option "xkb_layout" "de" [ 223.150] (II) intel(0): EDID vendor "CMO", prod id 5920 [ 223.150] (II) intel(0): Printing DDC gathered Modelines: [ 223.150] (II) intel(0): Modeline "1920x1080"x0.0 138.70 1920 1968 2000 2080 1080 1083 1088 1111 -hsync -vsync (66.7 kHz eP) [ 223.360] (II) intel(0): EDID vendor "CMO", prod id 5920 [ 223.360] (II) intel(0): Printing DDC gathered Modelines: [ 223.360] (II) intel(0): Modeline "1920x1080"x0.0 138.70 1920 1968 2000 2080 1080 1083 1088 1111 -hsync -vsync (66.7 kHz eP) [ 889.548] (II) Axis 0 value 1123 is outside expected range [1261, 5903] See https://wayland.freedesktop.org/libinput/doc/1.10.2//absolute_coordinate_ra… for details [ 3910.611] (II) Axis 0x1 value 4852 is outside expected range [1244, 4843] See https://wayland.freedesktop.org/libinput/doc/1.10.2//absolute_coordinate_ra… for details [ 7223.630] (II) Axis 0x1 value 998 is outside expected range [1244, 4843] See https://wayland.freedesktop.org/libinput/doc/1.10.2//absolute_coordinate_ra… for details [ 10295.091] (II) Axis 0x1 value 1070 is outside expected range [1244, 4843] See https://wayland.freedesktop.org/libinput/doc/1.10.2//absolute_coordinate_ra… for details [ 13380.382] (II) Axis 0x1 value 1194 is outside expected range [1244, 4843] See https://wayland.freedesktop.org/libinput/doc/1.10.2//absolute_coordinate_ra… for details [ 16423.988] (II) Axis 0x1 value 4883 is outside expected range [1244, 4843] See https://wayland.freedesktop.org/libinput/doc/1.10.2//absolute_coordinate_ra… for details [ 16933.358] (EE) [ 16933.358] (EE) Backtrace: [ 16933.396] (EE) 0: /usr/lib/xorg-server/Xorg (OsLookupColor+0x139) [0x55ed0ff73e99] [ 16933.396] (EE) 1: /usr/lib/libpthread.so.0 (funlockfile+0x50) [0x7f52df1f4e1f] [ 16933.411] (EE) 2: /usr/lib/libc.so.6 (gsignal+0x110) [0x7f52dee60860] [ 16933.412] (EE) 3: /usr/lib/libc.so.6 (abort+0x1c9) [0x7f52dee61ec9] [ 16933.413] (EE) 4: /usr/lib/libc.so.6 (__assert_fail_base+0x14c) [0x7f52dee590bc] [ 16933.414] (EE) 5: /usr/lib/libc.so.6 (__assert_fail+0x43) [0x7f52dee59133] [ 16933.415] (EE) 6: /usr/lib/libinput.so.10 (libinput_event_get_pointer_event+0xf41d) [0x7f52d8b6b87d] [ 16933.415] (EE) 7: /usr/lib/libinput.so.10 (libinput_event_get_pointer_event+0xff08) [0x7f52d8b706c8] [ 16933.416] (EE) 8: /usr/lib/libinput.so.10 (libinput_ref+0x448) [0x7f52d8b4c228] [ 16933.417] (EE) 9: /usr/lib/libinput.so.10 (libinput_dispatch+0x5f) [0x7f52d8b4babf] [ 16933.418] (EE) 10: /usr/lib/xorg/modules/input/libinput_drv.so (_init+0x29b9) [0x7f52d8db75b9] [ 16933.418] (EE) 11: /usr/lib/xorg-server/Xorg (input_unlock+0x293) [0x55ed0ff723d3] [ 16933.418] (EE) 12: /usr/lib/xorg-server/Xorg (OsCleanup+0x621) [0x55ed0ff74e01] [ 16933.418] (EE) 13: /usr/lib/xorg-server/Xorg (input_unlock+0xde) [0x55ed0ff71fce] [ 16933.419] (EE) 14: /usr/lib/libpthread.so.0 (start_thread+0xdc) [0x7f52df1ea08c] [ 16933.420] (EE) 15: /usr/lib/libc.so.6 (clone+0x3f) [0x7f52def21eb8] [ 16933.420] (EE) [ 16933.420] (EE) Fatal server error: [ 16933.420] (EE) Caught signal 6 (Aborted). Server aborting [ 16933.420] (EE) [ 16933.420] (EE) Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 16933.420] (EE) Please also check the log file at "/home/peter/.local/share/xorg/Xorg.0.log" for additional information. [ 16933.420] (EE) [ 16933.420] (II) AIGLX: Suspending AIGLX clients for VT switch [ 16933.992] (EE) Server terminated with error (1). Closing log file.

6 10

[arch-general] mandb - numerous parse failures on run (parallel, fribidi, numactl, pcre2, netpbm, etc..)
by David C. Rankin 15 Mar '18

15 Mar '18

All, Working though the cleaning from the crash during 4.15.8 update, I came across a number of man page problems which I thought were limited to the box that crashed -- however, checking, they affect all my Arch boxes. mandb will ultimately clean them, but I'm curious, is it just me, or does this affect the distro in general. All my boxes are initial install 2016 or earlier. Running # mandb --test will disclose the errors, running mandb alone seems to fix them. In addition to those listed in the title, the following are also showing errors: emacs, gnuplot, inkscape, mjpegtools, cyrus-sasl and several others Is this just something that is expected over time? -- David C. Rankin, J.D.,P.E.

2 2

[arch-general] Keyboard issue with kernel 4.15.5 (possible Arch issue?)
by Jeanette C. 14 Mar '18

14 Mar '18

Hey hey, I updated yesterday, from some;thing like a 4.13 or 4.14 kernel to version 4.15.5 and couldn't use my PS/2 keyboard. I saw the LEDs flashing when the system started, but couldn't get any response from the keyboard upon login. I've managed to get the system going with a USB keyboard. My PS/2 keyboard is rather old. Is it more likely that the keyboard is broken, or is there a chance of a kernel configuration breaking usage of the PS/2 keyboard? Best wishes, Jeanette -------- * Website: http://juliencoder.de - for summer is a state of sound * SoundCloud: https://soundcloud.com/jeanette_c * GitHub: https://github.com/fsilvain * Twitter: https://twitter.com/ffanci_silvain All I need is time A moment that is mine While I'm in between <3 (Britney Spears)

4 6

Re: [arch-general] Update to 4.15.8 on dual quad-core box locked on ( 3/16) Install DKMS modules, need help resurecting
by John Ramsden 13 Mar '18

13 Mar '18

Actually, you can easily create an arch ISO with ZFS embedded into it. It's what I do, and it takes about five minutes to create. https://ramsdenj.com/2016/06/23/arch-linux-on-zfs-part-1-embed-zfs-in-archi… -- John Ramsden On Mon, Mar 12, 2018, at 8:33 PM, Eli Schwartz via arch-general wrote: > On 03/12/2018 11:07 PM, John Ramsden via arch-general wrote: > > For anyone not happy with dkms, the archzfs repo [1] offers great > > support for ZFS in binary form, and I've been using it for a few > > years now with no problems. > > The most important part of using zfs is installing it. Especially > considering the reason zfs was mentioned in this thread was as a > proposal that someone might want to consider installing it, the ability > to actually do so would be nice. > > You cannot install an Arch Linux system on zfs, without the zfs kernel > drivers compiled for your running kernel. > > You cannot build those kernel modules on the Arch installation media, > without doing a full system upgrade and installing the compiler > toolchain, while holding back the kernel itself and hunting for the > kernel headers matching the kernel from the ISO, then getting the zfs > sources and building that too. > On a ramdisk overlay filesystem. > > Now, in theory the archzfs repo provides some archiso packages for > exactly this use case. Except no they don't, because their archiso > packages have not been updated since October... > > This is less than entirely impressive. They have rebuilt everything > else, why not this? > > -- > Eli Schwartz > Bug Wrangler and Trusted User > > Email had 1 attachment: > + signature.asc > 1k (application/pgp-signature)

4 4