January 2024 - Arch-general - lists.archlinux.org

Can't find KiCad symbols
by Sadeep Madurange 21 Jan '24

21 Jan '24

Hi everyone, I installed kicad and kicad-library (7.0.10-1) using pacman. After I launch KiCad and create a new project, I can't find any symbols in the symbol browser. Appreciate it if someone could point me in the right direction to get this set up. -- Sadeep Madurange PGP: 103BF9E3E750BF7E

3 3

polkit upgrade warning
by Jude DaShiell 19 Jan '24

19 Jan '24

warning: directory permissions differ on /usr/share/polkit-1/rules.d/ filesystem: 750 package: 755 (5/6) upgrading polkit [########################################################################] 100%warning: directory permissions differ on /usr/share/polkit-1/rules.d/ filesystem: 750 package: 755 What are correct permissions for these directories and has the upgrade corrected permissions that neede correction? -- Jude <jdashiel at panix dot com> "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." Ed Howdershelt 1940.

5 7

Re: Now the last one RTL-SDR Blog V4
by Rein Fernhout (Levitating) 18 Jan '24

18 Jan '24

The terminal output does suggest your gqrx was compiled with rtlsdr support. Try compiling gqrx-git from the AUR, preferably with rtl-sdr-git installed. Or follow the upstream build instructions. If that doesn't work, I think it's best to submit an issue upstream.[1] [1]: https://github.com/gqrx-sdr/gqrx/issues/new On Wed, 17 Jan 2024 at 13:18, pete <petegn(a)mail.com> wrote: > > On Wed, 17 Jan 2024 05:19:55 +0100 > "Rein Fernhout (Levitating)" <me(a)levitati.ng> wrote: > > > Do you have rtl-sdr (or rtl-sdr-git) installed? Did you try running > > rtl_test? [1] > > > > > > [1]: https://wiki.archlinux.org/title/RTL-SDR > > > > On Wed, 17 Jan 2024 at 03:38, pete <petegn(a)mail.com> wrote: > > > > > > Hi again > > > > > > once again previoius to the big ooppsss > > > > > > gqrx worked fine with my RTL-SDR Blog V4 > > > > > > no way can i get it to work now > > > it shows up in lsusb as > > > Bus 008 Device 004: ID 0bda:2838 Realtek Semiconductor Corp. RTL2838 DVB-T > > > > > > in the previous setup it did not show the DVB-T i believe that may be the > > > issue but try as i might i can not stop the darn DVB-T > > > > > > in "/usr/lib/udev/rules.d/10-rtl-sdr.rules" as per recomended > > > > > > RTL2832U OEM vid/pid, e.g. ezcap EzTV668 (E4000), Newsky TV28T (E4000/R820T) > > > etc. SUBSYSTEMS=="usb", ATTRS{idVendor}=="0bda", ATTRS{idProduct}=="2838", > > > MODE:="0666" > > > > > > This is already supplied > > > > > > > > > Pete > > Yes and yes > > rtl_test > Found 1 device(s): > 0: RTLSDRBlog, Blog V4, SN: 00000001 > > Using device 0: Generic RTL2832U OEM > Found Rafael Micro R828D tuner > RTL-SDR Blog V4 Detected > Supported gain values (29): 0.0 0.9 1.4 2.7 3.7 7.7 8.7 12.5 14.4 15.7 16.6 > 19.7 20.7 22.9 25.4 28.0 29.7 32.8 33.8 36.4 37.2 38.6 40.2 42.1 43.4 43.9 44.5 > 48.0 49.6 Sampling at 2048000 S/s. > > Info: This tool will continuously read from the device, and report if > samples get lost. If you observe no further output, everything is fine. > > Reading samples in async mode... > > > Running " gqrx" from a terminal > > gives > " gqrx > gr-osmosdr 0.2.0.0 (0.2.0) gnuradio 3.10.8.0 > built-in source types: file rtl rtl_tcp uhd hackrf bladerf rfspace airspy soapy > redpitaya rx_nb_cc :info: set_min_output_buffer on block 12 to 32768 > Resampling audio 96000 -> 48000 > BandPlanFile is /home/pete/.config/gqrx/bandplan.csv > BookmarksFile is /home/pete/.config/gqrx/bookmarks.csv > [INFO] [UHD] linux; GNU C++ version 13.2.1 20230801; Boost_108300; > UHD_4.6.0.0-0-unknown " > > > Pete > > > > >

1 0

nvme disk and system shutdown problem
by Łukasz Michalski 18 Jan '24

18 Jan '24

Hi, After installing Lexar 710 my system freezes after "Reached target Power Down". Suspend and reboot works ok. I do not use this disk in Arch, it is used for win10/win11. Power down from windows works without problems. I tried to blacklist nvme module - it did not help. I booted arch iso from pendrive and from there "poweroff -f" does not work either, so it looks it is related to kernel? My current kernel is: Linux archdevel 6.6.9-arch1-1, UEFI system (AMD b650m and Ryzen 7800x3d) I would be very grateful for any hints. Łukasz

2 4

boot partition expansion
by pete 17 Jan '24

17 Jan '24

Hi folks Well all is well after the previous mess apart from one thing that i must admit i forgot to tackle on the reinstall a few days ago my "/boot" partition is too small 300mb ran into a problem last night pacman installing kernel 6.7.0 The main kernel built installed fine but the fall back errored out with no room on . I have a spare empty partition sda2 of 40Gb sat doing nothing can i grow the boot partition to take some of that spare space without risking another reinstall Sorry to be a pain right now but i got enough medical issues right now and this is just bugging me beyond sanity Any help would be greatfully received Thanks Pete .

11 17

Now the last one RTL-SDR Blog V4
by pete 17 Jan '24

17 Jan '24

Hi again once again previoius to the big ooppsss gqrx worked fine with my RTL-SDR Blog V4 no way can i get it to work now it shows up in lsusb as Bus 008 Device 004: ID 0bda:2838 Realtek Semiconductor Corp. RTL2838 DVB-T in the previous setup it did not show the DVB-T i believe that may be the issue but try as i might i can not stop the darn DVB-T in "/usr/lib/udev/rules.d/10-rtl-sdr.rules" as per recomended RTL2832U OEM vid/pid, e.g. ezcap EzTV668 (E4000), Newsky TV28T (E4000/R820T) etc. SUBSYSTEMS=="usb", ATTRS{idVendor}=="0bda", ATTRS{idProduct}=="2838", MODE:="0666" This is already supplied Pete

2 1

This one i do not know
by pete 16 Jan '24

16 Jan '24

Hi folks first off thanks for all the assistance recently Now this one is one from memory i may have had before using Firefox to access You tube go to post comments on video's ant the text entry is very very slow i am not a quick typist by any stretch of the imagination but if i type a line of text i can almost make a cup of tea before it finishes printing on the screen I had thought it was FF but i have tried several previous versions that were all working perfectly on the previous install any ideas at all i firmly believe it is system based as i have gone back 5 releases of FF that were fine on the previous system . The installed version is also perfectly ok on the LapTop that is at the same level as this machine both updated at the same time ideas please Thanks Pete

3 4

Nextcloud 28 Upgrade - Works but Admin Overview fails to see 'sodium' module?
by David C. Rankin 15 Jan '24

15 Jan '24

All, Nextcloud server was updated to 28. The upgrade went well, but with a slight nit in the Admin -> Overview check. It lists: <quote> This instance is missing some recommended PHP modules. For improved performance and better compatibility it is highly recommended to install them: sodium. For more details see the documentation ↗. </quote> It is complaining that php-legacy-sodium wasn't installed, so we installed in and enabled the module in /etc/webapps/nextcloud/php.ini, (with a "systemctl reload httpd" in between each test) still not seen by nextcloud, so we enabled in it /etc/php-legacy/php-fpm.ini, still not seen by nextcloud, so we enabled it in the main /etc/php-legacy/php.ini -- still not seen by nextcloud -- but it is happily enabled: # php-legacy -m | grep -i sodium sodium No errors in /var/log/httpd/error.log No new errors in /var/log/nextcloud/nextcloud.log, just the nagging warning that has been there forever: "message":"Module \"apcu\" is already loaded at Unknown#0" Anybody know why nextcloud 28 Admin->Overview tells you it wants sodium, but then doesn't see it once it is installed. -- David C. Rankin, J.D.,P.E.

5 6

Hardware tests and SSDs - Was: When I upgrade to dbus-broker should I expect anything to break?
by Ralf Mardorf 14 Jan '24

14 Jan '24

On Thu, 2024-01-11 at 09:34 +0000, pete wrote: > for the record the Drives are all ok memory tested out ok . see > what happens if it starts acting up again Hi, while I'm using only internal SSDs, no HDDs anymore, since many years, I still don't have experiences with SSD failures. My desktop PC is quasi 24/7/365 up, with just short interruptions. Is your Arch install on a SSD? If so, there's probably an issue related to the "flash retention time". If an SSD is not supplied with power, it loses data relatively quickly even in the best condition. You can sometimes read that six months could already be too long. I believe that when SSDs become old, the period of time in which they can safely retain data without a power supply is shortened. Reading about this just happens to be on my to-do list, just like booting up my old desktop PC that hasn't been connected to the mains for months, maybe even longer than half a year. As it's on my todo list, I don't have any knowledge yet. It's just a guess that an old or somehow damaged SSD might look good, pass write and read tests, but the margin in which it can hold data without power might be very, very short at some point. Regards, Ralf

5 9

How to enable RNDIS USB ethernet device?
by David C. Rankin 10 Jan '24

10 Jan '24

All, I have a milkV-duo (Pi Pico look-alike running Risc chip) that runs Linux (busybox) and provides an RNDIS network interface to the host. For some reason when I connect the device to Arch, it is properly identified and the network device is created, but the interface is always brought up DOWN. Providing an address with ip link (it runs on 192.168.42.1) seems to enable the interface, but when you ssh to that IP it just logs into the Arch host instead of the milkV-duo. On connect the rndis host interface is created: Jan 05 00:30:34 2pi kernel: usb 2-8: new high-speed USB device number 6 using ehci-pci Jan 05 00:30:34 2pi kernel: usb 2-8: device descriptor read/64, error -71 Jan 05 00:30:34 2pi kernel: usb 2-8: New USB device found, idVendor=3346, idProduct=1009, bcdDevice= 5.10 Jan 05 00:30:34 2pi kernel: usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jan 05 00:30:34 2pi kernel: usb 2-8: Product: RNDIS Jan 05 00:30:34 2pi kernel: usb 2-8: Manufacturer: Cvitek Jan 05 00:30:34 2pi kernel: usb 2-8: SerialNumber: 0123456789 Jan 05 00:30:34 2pi kernel: rndis_host 2-8:1.0 usb0: register 'rndis_host' at usb-0000:00:1d.7-8, RNDIS device, 22:39:53:06:09:42 Jan 05 00:30:34 2pi kernel: rndis_host 2-8:1.0 enp0s29f7u8: renamed from usb0 But then for some reason the dnsmasq-dhcpd running on the chip doesn't get an address to automatically enable the interface. Checking Arch you have: # ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host noprefixroute valid_lft forever preferred_lft forever 2: enp2s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000 link/ether 00:23:ae:89:58:90 brd ff:ff:ff:ff:ff:ff inet 192.168.6.111/24 brd 192.168.6.255 scope global dynamic noprefixroute enp2s0 valid_lft 4986sec preferred_lft 4086sec inet6 fe80::b133:3c77:ce09:5b19/64 scope link valid_lft forever preferred_lft forever 5: enp0s29f7u8: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 22:39:53:06:09:42 brd ff:ff:ff:ff:ff:ff Simply assigning an IP allows you to ping it and get a ssh prompt: # ip addr add 192.168.42.1 broadcast + dev enp0s29f7u8 # ping 192.168.42.1 PING 192.168.42.1 (192.168.42.1) 56(84) bytes of data. 64 bytes from 192.168.42.1: icmp_seq=1 ttl=64 time=0.020 ms 64 bytes from 192.168.42.1: icmp_seq=2 ttl=64 time=0.018 ms 64 bytes from 192.168.42.1: icmp_seq=3 ttl=64 time=0.049 ms ^C --- 192.168.42.1 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2015ms # ssh david(a)192.168.42.1 david(a)192.168.42.1's password: You have new mail. Last login: Fri Jan 5 00:30:05 2024 from 192.168.6.114 00:33 2pi:~> l total 920 drwx------ 41 david david 4096 Jan 5 00:30 . drwxr-xr-x 12 root root 4096 Aug 30 23:11 .. drwxr-xr-x 2 david david 4096 Jul 10 2022 .FreeCAD <snip...> However, that has just logged into the host and not the milkV-duo board. So it almost looks like it is considering enp0s29f7u8 as alias for loopback. I must be missing something easy and fundamental, but I can't figure out what. Of course, plugging it into Win10 and using PuTTY, the address is already there and ssh connects directly to the board and not the host. There is no route added: # route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default _gateway 0.0.0.0 UG 1002 0 0 enp2s0 192.168.6.0 0.0.0.0 255.255.255.0 U 1002 0 0 enp2s0 Adding the address with ip link enables avahi-daemon for the interface and mdns: Jan 05 00:54:38 2pi avahi-daemon[328]: Joining mDNS multicast group on interface enp0s29f7u8.IPv4 with address 192.168.42.1. Jan 05 00:54:38 2pi avahi-daemon[328]: New relevant interface enp0s29f7u8.IPv4 for mDNS. Jan 05 00:54:38 2pi avahi-daemon[328]: Registering new address record for 192.168.42.1 on enp0s29f7u8.IPv4. Jan 05 00:54:39 2pi avahi-daemon[328]: Joining mDNS multicast group on interface enp0s29f7u8.IPv6 with address fe80::2039:53ff:fe06:942. Jan 05 00:54:39 2pi avahi-daemon[328]: New relevant interface enp0s29f7u8.IPv6 for mDNS. Jan 05 00:54:39 2pi avahi-daemon[328]: Registering new address record for fe80::2039:53ff:fe06:942 on enp0s29f7u8.*. Anybody else mess with one of these boards or a similar RNDIS device and know how to successfully bring the interface up so you can connect with the milkV board and not the host? -- David C. Rankin, J.D.,P.E.

2 5