Linux version 2.6.32-ARCH (tobias@T-POWA-LX) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Mon Jan 25 20:33:50 CET 2010 Command line: root=/dev/disk/by-uuid/98d77375-3450-499c-a1ea-e0faff73fc8e ro vga=795 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bfef0000 (usable) BIOS-e820: 00000000bfef0000 - 00000000bfef3000 (ACPI NVS) BIOS-e820: 00000000bfef3000 - 00000000bff00000 (ACPI data) BIOS-e820: 00000000c0000000 - 00000000d0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000130000000 (usable) DMI 2.4 present. Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) last_pfn = 0x130000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-C7FFF write-protect C8000-FFFFF uncachable MTRR variable ranges enabled: 0 base 0000000000 mask FF80000000 write-back 1 base 0080000000 mask FFC0000000 write-back 2 base 00C0000000 mask FFF0000000 write-back 3 base 0100000000 mask FFE0000000 write-back 4 base 0120000000 mask FFF0000000 write-back 5 base 00BFF00000 mask FFFFF00000 uncachable 6 disabled 7 disabled TOM2: 0000000130000000 aka 4864M x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000bff00000 - 00000000c0000000 (usable) ==> (reserved) e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xbfef0 max_arch_pfn = 0x400000000 Scanning 0 areas for low memory corruption modified physical RAM map: modified: 0000000000000000 - 0000000000010000 (reserved) modified: 0000000000010000 - 000000000009f000 (usable) modified: 000000000009f000 - 00000000000a0000 (reserved) modified: 00000000000f0000 - 0000000000100000 (reserved) modified: 0000000000100000 - 00000000bfef0000 (usable) modified: 00000000bfef0000 - 00000000bfef3000 (ACPI NVS) modified: 00000000bfef3000 - 00000000bff00000 (ACPI data) modified: 00000000c0000000 - 00000000d0000000 (reserved) modified: 00000000e0000000 - 00000000f0000000 (reserved) modified: 00000000fec00000 - 0000000100000000 (reserved) modified: 0000000100000000 - 0000000130000000 (usable) initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000bfef0000 0000000000 - 00bfe00000 page 2M 00bfe00000 - 00bfef0000 page 4k kernel direct mapping tables up to bfef0000 @ 10000-15000 init_memory_mapping: 0000000100000000-0000000130000000 0100000000 - 0130000000 page 2M kernel direct mapping tables up to 130000000 @ 13000-19000 RAMDISK: 37efa000 - 37fef838 ACPI: RSDP 00000000000f7350 00024 (v02 Nvidia) ACPI: XSDT 00000000bfef3100 00044 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) ACPI: FACP 00000000bfef9980 000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000) ACPI: DSDT 00000000bfef3280 0668C (v01 NVIDIA ASUSACPI 00001000 MSFT 03000000) ACPI: FACS 00000000bfef0000 00040 ACPI: HPET 00000000bfef9b80 00038 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000098) ACPI: MCFG 00000000bfef9c00 0003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) ACPI: APIC 00000000bfef9ac0 0007C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) ACPI: Local APIC address 0xfee00000 (8 early reservations) ==> bootmem [0000000000 - 0130000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 000169c898] TEXT DATA BSS ==> [0001000000 - 000169c898] #3 [0037efa000 - 0037fef838] RAMDISK ==> [0037efa000 - 0037fef838] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] #5 [000169d000 - 000169d14d] BRK ==> [000169d000 - 000169d14d] #6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000] #7 [0000013000 - 0000014000] PGTABLE ==> [0000013000 - 0000014000] found SMP MP-table at [ffff8800000f57c0] f57c0 [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880001800000-ffff880004dfffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00130000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x000bfef0 0: 0x00100000 -> 0x00130000 On node 0 totalpages: 982655 DMA zone: 56 pages used for memmap DMA zone: 104 pages reserved DMA zone: 3823 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 767784 pages, LIFO batch:31 Normal zone: 2688 pages used for memmap Normal zone: 193920 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x10de8201 base: 0xfefff000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 PM: Registered nosave memory: 00000000bfef0000 - 00000000bfef3000 PM: Registered nosave memory: 00000000bfef3000 - 00000000bff00000 PM: Registered nosave memory: 00000000bff00000 - 00000000c0000000 PM: Registered nosave memory: 00000000c0000000 - 00000000d0000000 PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 Allocating PCI resources starting at d0000000 (gap: d0000000:10000000) Booting paravirtualized kernel on bare hardware NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 29 pages/cpu @ffff880005000000 s89048 r8192 d21544 u1048576 pcpu-alloc: s89048 r8192 d21544 u1048576 alloc=1*2097152 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 965527 Kernel command line: root=/dev/disk/by-uuid/98d77375-3450-499c-a1ea-e0faff73fc8e ro vga=795 PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Initializing CPU#0 Checking aperture... No AGP bridge found Node 0: aperture @ 4000000 size 32 MB Aperture pointing to e820 RAM. Ignoring. Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 20000000 PM: Registered nosave memory: 0000000020000000 - 0000000024000000 Memory: 3794300k/4980736k available (3313k kernel code, 1050116k absent, 135360k reserved, 1752k data, 472k init) SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. NR_IRQS:768 Extended CMOS year: 2000 spurious 8259A interrupt: IRQ7. Console: colour dummy device 80x25 console [tty0] enabled hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer Fast TSC calibration using PIT Detected 2003.992 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 4009.98 BogoMIPS (lpj=6679973) Security Framework initialized Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) tseg: 00bff00000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 5 MCE banks using C1E aware idle routine Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f ACPI: Core revision 20090903 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4009.39 BogoMIPS (lpj=6680627) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 Brought up 2 CPUs Total of 2 processors activated (8019.37 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 NET: Registered protocol family 16 node 0 link 0: io port [b000, ffff] TOM: 00000000d0000000 aka 3328M node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [d0000000, dfffffff] node 0 link 0: mmio [f0000000, fe02ffff] node 0 link 0: mmio [e0000000, e01fffff] TOM2: 0000000130000000 aka 4864M bus: [00,01] on node 0 link 0 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [a0000, bffff] bus: 00 index 2 mmio: [d0000000, efffffff] bus: 00 index 3 mmio: [f0000000, ffffffff] bus: 00 index 4 mmio: [130000000, fcffffffff] ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG at e0000000 - efffffff PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:05.0: reg 10 32bit mmio: [0xfc000000-0xfcffffff] pci 0000:00:05.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff] pci 0000:00:05.0: reg 1c 64bit mmio: [0xfb000000-0xfbffffff] pci 0000:00:05.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] pci 0000:00:0a.1: reg 20 io port: [0x4c00-0x4c3f] pci 0000:00:0a.1: reg 24 io port: [0x4c40-0x4c7f] pci 0000:00:0a.1: PME# supported from D3hot D3cold pci 0000:00:0a.1: PME# disabled pci 0000:00:0b.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff] pci 0000:00:0b.0: supports D1 D2 pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0b.0: PME# disabled pci 0000:00:0b.1: reg 10 32bit mmio: [0xfe02e000-0xfe02e0ff] pci 0000:00:0b.1: supports D1 D2 pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0b.1: PME# disabled pci 0000:00:0d.0: reg 20 io port: [0xf400-0xf40f] pci 0000:00:0e.0: reg 10 io port: [0x9f0-0x9f7] pci 0000:00:0e.0: reg 14 io port: [0xbf0-0xbf3] pci 0000:00:0e.0: reg 18 io port: [0x970-0x977] pci 0000:00:0e.0: reg 1c io port: [0xb70-0xb73] pci 0000:00:0e.0: reg 20 io port: [0xe000-0xe00f] pci 0000:00:0e.0: reg 24 32bit mmio: [0xfe02d000-0xfe02dfff] pci 0000:00:0f.0: reg 10 io port: [0x9e0-0x9e7] pci 0000:00:0f.0: reg 14 io port: [0xbe0-0xbe3] pci 0000:00:0f.0: reg 18 io port: [0x960-0x967] pci 0000:00:0f.0: reg 1c io port: [0xb60-0xb63] pci 0000:00:0f.0: reg 20 io port: [0xcc00-0xcc0f] pci 0000:00:0f.0: reg 24 32bit mmio: [0xfe02c000-0xfe02cfff] pci 0000:00:10.1: reg 10 32bit mmio: [0xfe024000-0xfe027fff] pci 0000:00:10.1: PME# supported from D3hot D3cold pci 0000:00:10.1: PME# disabled pci 0000:00:14.0: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff] pci 0000:00:14.0: reg 14 io port: [0xc800-0xc807] pci 0000:00:14.0: supports D1 D2 pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:14.0: PME# disabled pci 0000:01:08.0: reg 10 32bit mmio: [0xfddff000-0xfddff7ff] pci 0000:01:08.0: supports D1 D2 pci 0000:00:10.0: transparent bridge pci 0000:00:10.0: bridge io port: [0xb000-0xbfff] pci 0000:00:10.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff] pci 0000:00:10.0: bridge 32bit mmio pref: [0xfde00000-0xfdefffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK7] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0 ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.