Sorry for the noise, After reviewing the logs a second time I realised I am blind, the server is responding, obviously my laptop is having issues then? I will include some additional info, both my laptop and server are connected over ethernet, my laptop has the following configuration: enp2s0: connected to eth "Realtek RTL8111/8168/8411" ethernet (r8169), 84:A9:38:11:77:65, hw, mtu 1500 ip4 default, ip6 default inet4 192.168.2.3/24 route4 192.168.2.0/24 metric 100 route4 default via 192.168.2.1 metric 100 inet6 fe80::c347:9e05:52bc:6433/64 inet6 2001:8b0:57a:2385::1/128 route6 2001:8b0:57a:2385::1/128 metric 100 route6 fe80::/64 metric 1024 route6 default via fe80::dea6:32ff:fe78:ebb1 metric 100 And my server has the following configuration: br0: connected to bridge-br0 "br0" bridge, E2:1B:81:AC:C7:A1, sw, mtu 1500 ip4 default, ip6 default inet4 192.168.2.2/24 route4 192.168.2.0/24 metric 425 route4 default via 192.168.2.1 metric 425 inet6 fe80::d474:abac:4022:cecd/64 inet6 2001:8b0:57a:2385::2/128 route6 2001:8b0:57a:2385::2/128 metric 425 route6 fe80::/64 metric 1024 route6 default via fe80::dea6:32ff:fe78:ebb1 metric 425 It is a network bridge on top of the physical interface enp1s0: enp1s0: connected to bridge-slave-enp1s0 "Realtek RTL8111/8168/8411" ethernet (r8169), D0:27:88:94:DB:07, hw, mtu 1500 master br0 Hope this might help with figuring out the issue. Thanks, -- Polarian GPG signature: 0770E5312238C760 Website: https://polarian.dev JID/XMPP: polarian@polarian.dev