-----Original Message----- From: arch-general [mailto:arch-general-bounces@archlinux.org] On Behalf Of niya levi via arch-general Sent: Thursday, January 12, 2017 9:22 PM To: arch-general@archlinux.org Cc: niya levi <niyalevi@gmail.com> Subject: [arch-general] btrfs raid 10 fileserver with ata errors
hi everyone i have a fileserver with 6 1tb disks i get the following errors repeated constantly
---------------------------------------------------------------------------------------------- -------- ata17.00 exception Emask 0x0 Sact 0x0 SErr 0x0 action 0x6 frozen failed command: READ DMA cmd c8/00:30: tag 14 dma 65536 in res 40/00:ff:00 Emask 0x4 (timeout) status {DRDY}
---------------------------------------------------------------------------------------------- ------------
after some googling it's been suggested that it's either a hard drive, the sata controller or the sata cables. how do i go about diagnosing and fixing the problem, any suggestions or guidance would be appreciated. shadrock
I've had this problem before. IIRC, you can match up the ata17.00 with what drive it's talking about by looking at your kernel boot messages. The first thing I would do is switch out the SATA cable and see if the problem persists. If that doesn't work, run a scan of the drive using the manufacturers scan program.