On 08/14/2010 04:46 PM, Tobias Powalowski wrote:
Latest kernel is in testing, please signoff for both arches.
greetings tpowa
Tobias, I updated the box that 2.6.34.3 fails to boot do to dmraid problems (http://bugs.archlinux.org/task/20499) to 2.6.35.2-1 and the box boots with dmraid just fine. However, there is a problem with udev. During boot, the box hangs at udev start for a good 2 minutes. The display on the screen is: "Waiting for Udev events to be processed:" The corresponding dmesg failure is: Adding 1951860k swap on /dev/mapper/nvidia_baaccajap8. Priority:-1 extents:1 across:1951860k forcedeth 0000:00:0a.0: irq 45 for MSI/MSI-X NET: Registered protocol family 10 lo: Disabled Privacy Extensions f71882fg: Found f71882fg chip at 0xa00, revision 32 f71882fg f71882fg.2560: Fan: 1 is in duty-cycle mode f71882fg f71882fg.2560: Fan: 2 is in duty-cycle mode f71882fg f71882fg.2560: Fan: 3 is in duty-cycle mode f71882fg f71882fg.2560: Fan: 4 is in duty-cycle mode eth0: no IPv6 routers present INFO: task modprobe:1642 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. modprobe D 0000000000000000 0 1642 1640 0x00000000 ffff880226d2ba28 0000000000000082 ffff88022fca0000 ffff880200000000 0000000000014f40 0000000000014f40 ffff880226d2bfd8 ffff880226d2bfd8 ffff880226d2bfd8 ffff8802276dbe70 ffff880226d2bfd8 0000000000014f40 Call Trace: [<ffffffffa01c3ba5>] usb_kill_urb+0x85/0xc0 [usbcore] [<ffffffff810717c0>] ? autoremove_wake_function+0x0/0x40 [<ffffffffa01f6831>] usbhid_init_reports+0xb1/0x120 [usbhid] [<ffffffffa01f6d53>] usbhid_start+0x4b3/0x5a0 [usbhid] [<ffffffffa02bf6d8>] hid_device_probe+0x98/0xe0 [hid] [<ffffffff812875ba>] ? driver_sysfs_add+0x5a/0x90 [<ffffffff81287896>] driver_probe_device+0x96/0x1c0 [<ffffffff81287a60>] ? __device_attach+0x0/0x60 [<ffffffff81287aab>] __device_attach+0x4b/0x60 [<ffffffff81286474>] bus_for_each_drv+0x64/0x90 [<ffffffff8128772f>] device_attach+0x8f/0xb0 [<ffffffff81286ee5>] bus_probe_device+0x25/0x40 [<ffffffff81284c2f>] device_add+0x4ff/0x5e0 [<ffffffffa02bf0a7>] hid_add_device+0x87/0x1b0 [hid] [<ffffffffa01f44b9>] usbhid_probe+0x329/0x500 [usbhid] [<ffffffffa01c8a2b>] usb_probe_interface+0xfb/0x1f0 [usbcore] [<ffffffff81287896>] driver_probe_device+0x96/0x1c0 [<ffffffff81287a5b>] __driver_attach+0x9b/0xa0 [<ffffffff812879c0>] ? __driver_attach+0x0/0xa0 [<ffffffff812867ce>] bus_for_each_dev+0x5e/0x90 [<ffffffff81287559>] driver_attach+0x19/0x20 [<ffffffff81287067>] bus_add_driver+0xc7/0x2e0 [<ffffffff81287cd1>] driver_register+0x71/0x140 [<ffffffffa01c76f8>] usb_register_driver+0xb8/0x170 [usbcore] [<ffffffffa0116000>] ? hid_init+0x0/0xd1 [usbhid] [<ffffffffa0116093>] hid_init+0x93/0xd1 [usbhid] [<ffffffff81002149>] do_one_initcall+0x39/0x1a0 [<ffffffff8108cdeb>] sys_init_module+0xbb/0x200 [<ffffffff81009e82>] system_call_fastpath+0x16/0x1b I know it fails because after the boot process completes, I get errors like: 12:59 nirvana:~/arch/pkg/parnell> Broadcast message from nut (Wed Aug 18 12:59:54 2010): UPS archangel_ups@archangel.3111skyline.com is unavailable So something is wrong. What do you want me to do? -- David C. Rankin, J.D.,P.E. Rankin Law Firm, PLLC 510 Ochiltree Street Nacogdoches, Texas 75961 Telephone: (936) 715-9333 Facsimile: (936) 715-9339 www.rankinlawfirm.com