The terminal output does suggest your gqrx was compiled with rtlsdr support. Try compiling gqrx-git from the AUR, preferably with rtl-sdr-git installed. Or follow the upstream build instructions. If that doesn't work, I think it's best to submit an issue upstream.[1] [1]: https://github.com/gqrx-sdr/gqrx/issues/new On Wed, 17 Jan 2024 at 13:18, pete <petegn@mail.com> wrote:
On Wed, 17 Jan 2024 05:19:55 +0100 "Rein Fernhout (Levitating)" <me@levitati.ng> wrote:
Do you have rtl-sdr (or rtl-sdr-git) installed? Did you try running rtl_test? [1]
[1]: https://wiki.archlinux.org/title/RTL-SDR
On Wed, 17 Jan 2024 at 03:38, pete <petegn@mail.com> wrote:
Hi again
once again previoius to the big ooppsss
gqrx worked fine with my RTL-SDR Blog V4
no way can i get it to work now it shows up in lsusb as Bus 008 Device 004: ID 0bda:2838 Realtek Semiconductor Corp. RTL2838 DVB-T
in the previous setup it did not show the DVB-T i believe that may be the issue but try as i might i can not stop the darn DVB-T
in "/usr/lib/udev/rules.d/10-rtl-sdr.rules" as per recomended
RTL2832U OEM vid/pid, e.g. ezcap EzTV668 (E4000), Newsky TV28T (E4000/R820T) etc. SUBSYSTEMS=="usb", ATTRS{idVendor}=="0bda", ATTRS{idProduct}=="2838", MODE:="0666"
This is already supplied
Pete
Yes and yes
rtl_test Found 1 device(s): 0: RTLSDRBlog, Blog V4, SN: 00000001
Using device 0: Generic RTL2832U OEM Found Rafael Micro R828D tuner RTL-SDR Blog V4 Detected Supported gain values (29): 0.0 0.9 1.4 2.7 3.7 7.7 8.7 12.5 14.4 15.7 16.6 19.7 20.7 22.9 25.4 28.0 29.7 32.8 33.8 36.4 37.2 38.6 40.2 42.1 43.4 43.9 44.5 48.0 49.6 Sampling at 2048000 S/s.
Info: This tool will continuously read from the device, and report if samples get lost. If you observe no further output, everything is fine.
Reading samples in async mode...
Running " gqrx" from a terminal
gives " gqrx gr-osmosdr 0.2.0.0 (0.2.0) gnuradio 3.10.8.0 built-in source types: file rtl rtl_tcp uhd hackrf bladerf rfspace airspy soapy redpitaya rx_nb_cc :info: set_min_output_buffer on block 12 to 32768 Resampling audio 96000 -> 48000 BandPlanFile is /home/pete/.config/gqrx/bandplan.csv BookmarksFile is /home/pete/.config/gqrx/bookmarks.csv [INFO] [UHD] linux; GNU C++ version 13.2.1 20230801; Boost_108300; UHD_4.6.0.0-0-unknown "
Pete