thanks 2014/1/10 Mark Lee :

On Fri, 2014-01-10 at 22:02 +0100, Maykel Franco wrote:

...

I cannot install blink-darcs in archlinux...Can I help me please??

Thanks in advanced.

[root@arch-maykel maykel]# yaourt -S blink-darcs --noconfirm

==> Descargando PKGBUILD desde AUR... x PKGBUILD Comment by fdservices (2012-05-21 07:34) If this works with python27 shouldit not be updated?

Comment by Synthead (2013-01-28 02:43) The documentation calls for Python 2.5 or 2.6, but seems to run ok on Python 2.7. Updated!

Comment by Synthead (2013-01-28 02:44) Also, the darcs-bin is an easy way to get darcs on your system without worrying about all the build dependencies ;)

Comment by grugnog (2013-03-12 12:25) Getting a segfault when trying making a call with a fresh install of blink and dependencies. Unfortunately it is a hisenbug - since running it with strace works! Will need to try again with gdb at some point. My hunch is that it may be related to https://bugs.launchpad.net/ubuntu/+source/libgcrypt11/+bug/1013798

Comment by gardar (2013-11-15 13:43) Dependency `python2-pyqt' of `blink-darcs' does not exist

blink-darcs 20130127-1 (vie may 13 09:28:12 CEST 2011) (Paquete sin soporte: podría ser peligroso!) ==> dependencias de blink-darcs: - python2 (ya instalado) - python2-application (ya instalado) - python2-cjson (ya instalado) - python2-gnutls (ya instalado) - python2-pyqt (ya instalado) - twisted (ya instalado) - python2-eventlib (compilando des de AUR) - python2-sipsimple (compilando des de AUR) - darcs (compilando des de AUR)

==> Continuar compilando blink-darcs? [S/n] ==> --------------------------------------- ==> ==> Compilando e instalando el paquete ==> Las fuentes de blink-darcs se guardaron en la última ocasión. Utilizarlas? [S/n] ==> Instalar o compilar las dependencias que faltan para blink-darcs:

==> Descargando PKGBUILD desde AUR... x PKGBUILD Comment by bretthoerner (2012-12-07 14:57) == Install or build missing dependencies for darcs: error: target not found: haskell-haskeline0.7

Any ideas?

Comment by stewSquared (2013-02-26 17:11) I recommend installing from the Haskell Hackage:

$ pacman -S cabal-install $ cabal install darcs

This way, it's guaranteed to be up-to-date (bonus: haskell-tar and haskell-haskeline are present).

Comment by misc (2013-03-11 11:23) Is prepare() still observed by pacman? Had to move its content to build() for it to work.

Comment by gtmanfred (2013-03-11 15:53) bah, my bad, prepare doesn't exist until pacman 4.1 I was using it so i wouldn't have to continually configure it Fixing

Comment by tzok (2013-06-21 09:52) Please add haskell-utf8-string to makedepends, as it is a required package.

darcs 2.8.4-2 (mié mar 21 11:49:56 CET 2012) (Paquete sin soporte: podría ser peligroso!) ==> dependencias de darcs: - curl (ya instalado) - gmp (ya instalado) - ncurses>=5.6-7 (ya instalado) - ghc (ya instalado) - haskell-tar (ya instalado) - haskell-text<0.12 (ya instalado) - haskell-haskeline (ya instalado) - haskell-random (ya instalado) - haskell-vector (ya instalado) - haskell-html<1.1 (ya instalado) - haskell-parsec<3.2 (ya instalado) - haskell-regex-compat (ya instalado) - haskell-hashed-storage<0.6 (compilando des de AUR)

==> Continuar compilando darcs? [S/n] ==> --------------------------------- ==> ==> Compilando e instalando el paquete ==> Instalar o compilar las dependencias que faltan para darcs:

==> Descargando PKGBUILD desde AUR... x PKGBUILD x haskell-hashed-storage.install Comment by goviedo (2013-09-26 14:13) I had a problem compiling this to darcs in my Archbang x64 kernel

Storage/Hashed/Utils.hs:17:1: Bad interface file: /usr/lib/ghc-7.6.3/site-local/mtl-2.1.2/Control/Monad/Identity.hi Data.Binary.getWord8: end of file == ERROR: A failure occurred in build(). Aborting...

Linux arch 3.11.1-2-ARCH #1 SMP PREEMPT Sun Sep 22 19:45:00 CEST 2013 x86_64 GNU/Linux

Comment by eatsaq (2013-11-08 01:14) - Extracting hashed-storage-0.5.10.tar.gz with bsdtar == Starting build()...

Setup.hs:27:3: Warning: In the use of `runTests' (imported from Distribution.Simple, but defined in Distribution.Simple.UserHooks): Deprecated: "Please use the new testing interface instead!" Configuring hashed-storage-0.5.10... Setup: At least the following dependencies are missing: extensible-exceptions -any, mtl -any == ERROR: A failure occurred in build().

Comment by skeksis268 (2013-12-01 18:57) fails build with the following error:

Setup: At least one of the following dependencies are missing: mmap == 0.5.*

This is despite having the latest of haskell-mmap package installed

Comment by thoth (2013-12-15 16:14) +1 here as well (same as skeksis268)

haskell-hashed-storage 0.5.10-1 (lun mar 11 08:26:53 CET 2013) (Paquete sin soporte: podría ser peligroso!) ==> dependencias de haskell-hashed-storage: - ghc (ya instalado) - haskell-dataenc (ya instalado) - haskell-extensible-exceptions (ya instalado) - haskell-mmap (ya instalado) - haskell-mtl (ya instalado) - haskell-zlib (ya instalado) - ghc (ya instalado)

==> Continuar compilando haskell-hashed-storage? [S/n] ==> -------------------------------------------------- ==> ==> Compilando e instalando el paquete ==> AVISO: Compilar un paquete como administrador es peligroso. Ejecute yaourt como usuario normal. ==> Creando el paquete: haskell-hashed-storage 0.5.10-1 (vie ene 10 22:00:52 CET 2014) ==> Resolviendo dependencias... ==> Verificando conflictos... ==> Recibiendo fuentes... -> Descargando hashed-storage-0.5.10.tar.gz... % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 0 0 0 57658 0 0 142k 0 --:--:-- --:--:-- --:--:-- 142k ==> Validando el archivo fuente con md5sums... hashed-storage-0.5.10.tar.gz ... Aprobado ==> Descomprimiendo fuentes... -> Extrayendo hashed-storage-0.5.10.tar.gz con bsdtar ==> Iniciando build()...

Setup.hs:27:3: Warning: In the use of `runTests' (imported from Distribution.Simple, but defined in Distribution.Simple.UserHooks): Deprecated: "Please use the new testing interface instead!" Configuring hashed-storage-0.5.10... Setup: At least the following dependencies are missing: mmap ==0.5.* ==> ERROR: Se produjo un error en build(). Cancelando... ==> ERROR: Makepkg no ha podido compilar haskell-hashed-storage. ==> Reiniciar la compilación de haskell-hashed-storage? [s/N] ==> --------------------------------------------------------- ==> ==> Reiniciar la compilación de darcs? [s/N] ==> ---------------------------------------- ==> ==> Reiniciar la compilación de blink-darcs? [s/N] ==> ---------------------------------------------- ==>

Salutations!

I think you have the wrong list, you want aur-general@archlinux.org

Regards, Mark -- Mark Lee

2014/1/10 Karol Blazewicz :

On Fri, Jan 10, 2014 at 10:09 PM, Maykel Franco wrote:

...

thanks

2014/1/10 Mark Lee :

...

On Fri, 2014-01-10 at 22:02 +0100, Maykel Franco wrote:

...

I cannot install blink-darcs in archlinux...Can I help me please??

Thanks in advanced.

[root@arch-maykel maykel]# yaourt -S blink-darcs --noconfirm

==> Descargando PKGBUILD desde AUR... x PKGBUILD Comment by fdservices (2012-05-21 07:34) If this works with python27 shouldit not be updated?

Comment by Synthead (2013-01-28 02:43) The documentation calls for Python 2.5 or 2.6, but seems to run ok on Python 2.7. Updated!

Comment by Synthead (2013-01-28 02:44) Also, the darcs-bin is an easy way to get darcs on your system without worrying about all the build dependencies ;)

Comment by grugnog (2013-03-12 12:25) Getting a segfault when trying making a call with a fresh install of blink and dependencies. Unfortunately it is a hisenbug - since running it with strace works! Will need to try again with gdb at some point. My hunch is that it may be related to https://bugs.launchpad.net/ubuntu/+source/libgcrypt11/+bug/1013798

Comment by gardar (2013-11-15 13:43) Dependency `python2-pyqt' of `blink-darcs' does not exist

blink-darcs 20130127-1 (vie may 13 09:28:12 CEST 2011) (Paquete sin soporte: podría ser peligroso!) ==> dependencias de blink-darcs: - python2 (ya instalado) - python2-application (ya instalado) - python2-cjson (ya instalado) - python2-gnutls (ya instalado) - python2-pyqt (ya instalado) - twisted (ya instalado) - python2-eventlib (compilando des de AUR) - python2-sipsimple (compilando des de AUR) - darcs (compilando des de AUR)

==> Continuar compilando blink-darcs? [S/n] ==> --------------------------------------- ==> ==> Compilando e instalando el paquete ==> Las fuentes de blink-darcs se guardaron en la última ocasión. Utilizarlas? [S/n] ==> Instalar o compilar las dependencias que faltan para blink-darcs:

==> Descargando PKGBUILD desde AUR... x PKGBUILD Comment by bretthoerner (2012-12-07 14:57) == Install or build missing dependencies for darcs: error: target not found: haskell-haskeline0.7

Any ideas?

Comment by stewSquared (2013-02-26 17:11) I recommend installing from the Haskell Hackage:

$ pacman -S cabal-install $ cabal install darcs

This way, it's guaranteed to be up-to-date (bonus: haskell-tar and haskell-haskeline are present).

Comment by misc (2013-03-11 11:23) Is prepare() still observed by pacman? Had to move its content to build() for it to work.

Comment by gtmanfred (2013-03-11 15:53) bah, my bad, prepare doesn't exist until pacman 4.1 I was using it so i wouldn't have to continually configure it Fixing

Comment by tzok (2013-06-21 09:52) Please add haskell-utf8-string to makedepends, as it is a required package.

darcs 2.8.4-2 (mié mar 21 11:49:56 CET 2012) (Paquete sin soporte: podría ser peligroso!) ==> dependencias de darcs: - curl (ya instalado) - gmp (ya instalado) - ncurses>=5.6-7 (ya instalado) - ghc (ya instalado) - haskell-tar (ya instalado) - haskell-text<0.12 (ya instalado) - haskell-haskeline (ya instalado) - haskell-random (ya instalado) - haskell-vector (ya instalado) - haskell-html<1.1 (ya instalado) - haskell-parsec<3.2 (ya instalado) - haskell-regex-compat (ya instalado) - haskell-hashed-storage<0.6 (compilando des de AUR)

==> Continuar compilando darcs? [S/n] ==> --------------------------------- ==> ==> Compilando e instalando el paquete ==> Instalar o compilar las dependencias que faltan para darcs:

==> Descargando PKGBUILD desde AUR... x PKGBUILD x haskell-hashed-storage.install Comment by goviedo (2013-09-26 14:13) I had a problem compiling this to darcs in my Archbang x64 kernel

Storage/Hashed/Utils.hs:17:1: Bad interface file: /usr/lib/ghc-7.6.3/site-local/mtl-2.1.2/Control/Monad/Identity.hi Data.Binary.getWord8: end of file == ERROR: A failure occurred in build(). Aborting...

Linux arch 3.11.1-2-ARCH #1 SMP PREEMPT Sun Sep 22 19:45:00 CEST 2013 x86_64 GNU/Linux

Comment by eatsaq (2013-11-08 01:14) - Extracting hashed-storage-0.5.10.tar.gz with bsdtar == Starting build()...

Setup.hs:27:3: Warning: In the use of `runTests' (imported from Distribution.Simple, but defined in Distribution.Simple.UserHooks): Deprecated: "Please use the new testing interface instead!" Configuring hashed-storage-0.5.10... Setup: At least the following dependencies are missing: extensible-exceptions -any, mtl -any == ERROR: A failure occurred in build().

Comment by skeksis268 (2013-12-01 18:57) fails build with the following error:

Setup: At least one of the following dependencies are missing: mmap == 0.5.*

This is despite having the latest of haskell-mmap package installed

Comment by thoth (2013-12-15 16:14) +1 here as well (same as skeksis268)

haskell-hashed-storage 0.5.10-1 (lun mar 11 08:26:53 CET 2013) (Paquete sin soporte: podría ser peligroso!) ==> dependencias de haskell-hashed-storage: - ghc (ya instalado) - haskell-dataenc (ya instalado) - haskell-extensible-exceptions (ya instalado) - haskell-mmap (ya instalado) - haskell-mtl (ya instalado) - haskell-zlib (ya instalado) - ghc (ya instalado)

==> Continuar compilando haskell-hashed-storage? [S/n] ==> -------------------------------------------------- ==> ==> Compilando e instalando el paquete ==> AVISO: Compilar un paquete como administrador es peligroso. Ejecute yaourt como usuario normal. ==> Creando el paquete: haskell-hashed-storage 0.5.10-1 (vie ene 10 22:00:52 CET 2014) ==> Resolviendo dependencias... ==> Verificando conflictos... ==> Recibiendo fuentes... -> Descargando hashed-storage-0.5.10.tar.gz... % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 0 0 0 57658 0 0 142k 0 --:--:-- --:--:-- --:--:-- 142k ==> Validando el archivo fuente con md5sums... hashed-storage-0.5.10.tar.gz ... Aprobado ==> Descomprimiendo fuentes... -> Extrayendo hashed-storage-0.5.10.tar.gz con bsdtar ==> Iniciando build()...

Setup.hs:27:3: Warning: In the use of `runTests' (imported from Distribution.Simple, but defined in Distribution.Simple.UserHooks): Deprecated: "Please use the new testing interface instead!" Configuring hashed-storage-0.5.10... Setup: At least the following dependencies are missing: mmap ==0.5.* ==> ERROR: Se produjo un error en build(). Cancelando... ==> ERROR: Makepkg no ha podido compilar haskell-hashed-storage. ==> Reiniciar la compilación de haskell-hashed-storage? [s/N] ==> --------------------------------------------------------- ==> ==> Reiniciar la compilación de darcs? [s/N] ==> ---------------------------------------- ==> ==> Reiniciar la compilación de blink-darcs? [s/N] ==> ---------------------------------------------- ==>

Salutations!

I think you have the wrong list, you want aur-general@archlinux.org

Regards, Mark -- Mark Lee

Your first message is a bloody mess: - Why isn't it in English? - Why would I care about all the comments like 'Comment by thoth (2013-12-15 16:14)' etc? Why not post just the output from makepkg?

because I'm from Spain and I have copied the error output in Spanish

2014/1/10 Karol Blazewicz :

On Fri, Jan 10, 2014 at 10:09 PM, Maykel Franco wrote:

...

thanks

2014/1/10 Mark Lee :

...

On Fri, 2014-01-10 at 22:02 +0100, Maykel Franco wrote:

...

I cannot install blink-darcs in archlinux...Can I help me please??

Thanks in advanced.

[root@arch-maykel maykel]# yaourt -S blink-darcs --noconfirm

==> Descargando PKGBUILD desde AUR... x PKGBUILD Comment by fdservices (2012-05-21 07:34) If this works with python27 shouldit not be updated?

Comment by Synthead (2013-01-28 02:43) The documentation calls for Python 2.5 or 2.6, but seems to run ok on Python 2.7. Updated!

Comment by Synthead (2013-01-28 02:44) Also, the darcs-bin is an easy way to get darcs on your system without worrying about all the build dependencies ;)

Comment by grugnog (2013-03-12 12:25) Getting a segfault when trying making a call with a fresh install of blink and dependencies. Unfortunately it is a hisenbug - since running it with strace works! Will need to try again with gdb at some point. My hunch is that it may be related to https://bugs.launchpad.net/ubuntu/+source/libgcrypt11/+bug/1013798

Comment by gardar (2013-11-15 13:43) Dependency `python2-pyqt' of `blink-darcs' does not exist

blink-darcs 20130127-1 (vie may 13 09:28:12 CEST 2011) (Paquete sin soporte: podría ser peligroso!) ==> dependencias de blink-darcs: - python2 (ya instalado) - python2-application (ya instalado) - python2-cjson (ya instalado) - python2-gnutls (ya instalado) - python2-pyqt (ya instalado) - twisted (ya instalado) - python2-eventlib (compilando des de AUR) - python2-sipsimple (compilando des de AUR) - darcs (compilando des de AUR)

==> Continuar compilando blink-darcs? [S/n] ==> --------------------------------------- ==> ==> Compilando e instalando el paquete ==> Las fuentes de blink-darcs se guardaron en la última ocasión. Utilizarlas? [S/n] ==> Instalar o compilar las dependencias que faltan para blink-darcs:

==> Descargando PKGBUILD desde AUR... x PKGBUILD Comment by bretthoerner (2012-12-07 14:57) == Install or build missing dependencies for darcs: error: target not found: haskell-haskeline0.7

Any ideas?

Comment by stewSquared (2013-02-26 17:11) I recommend installing from the Haskell Hackage:

$ pacman -S cabal-install $ cabal install darcs

This way, it's guaranteed to be up-to-date (bonus: haskell-tar and haskell-haskeline are present).

Comment by misc (2013-03-11 11:23) Is prepare() still observed by pacman? Had to move its content to build() for it to work.

Comment by gtmanfred (2013-03-11 15:53) bah, my bad, prepare doesn't exist until pacman 4.1 I was using it so i wouldn't have to continually configure it Fixing

Comment by tzok (2013-06-21 09:52) Please add haskell-utf8-string to makedepends, as it is a required package.

darcs 2.8.4-2 (mié mar 21 11:49:56 CET 2012) (Paquete sin soporte: podría ser peligroso!) ==> dependencias de darcs: - curl (ya instalado) - gmp (ya instalado) - ncurses>=5.6-7 (ya instalado) - ghc (ya instalado) - haskell-tar (ya instalado) - haskell-text<0.12 (ya instalado) - haskell-haskeline (ya instalado) - haskell-random (ya instalado) - haskell-vector (ya instalado) - haskell-html<1.1 (ya instalado) - haskell-parsec<3.2 (ya instalado) - haskell-regex-compat (ya instalado) - haskell-hashed-storage<0.6 (compilando des de AUR)

==> Continuar compilando darcs? [S/n] ==> --------------------------------- ==> ==> Compilando e instalando el paquete ==> Instalar o compilar las dependencias que faltan para darcs:

==> Descargando PKGBUILD desde AUR... x PKGBUILD x haskell-hashed-storage.install Comment by goviedo (2013-09-26 14:13) I had a problem compiling this to darcs in my Archbang x64 kernel

Storage/Hashed/Utils.hs:17:1: Bad interface file: /usr/lib/ghc-7.6.3/site-local/mtl-2.1.2/Control/Monad/Identity.hi Data.Binary.getWord8: end of file == ERROR: A failure occurred in build(). Aborting...

Linux arch 3.11.1-2-ARCH #1 SMP PREEMPT Sun Sep 22 19:45:00 CEST 2013 x86_64 GNU/Linux

Comment by eatsaq (2013-11-08 01:14) - Extracting hashed-storage-0.5.10.tar.gz with bsdtar == Starting build()...

Setup.hs:27:3: Warning: In the use of `runTests' (imported from Distribution.Simple, but defined in Distribution.Simple.UserHooks): Deprecated: "Please use the new testing interface instead!" Configuring hashed-storage-0.5.10... Setup: At least the following dependencies are missing: extensible-exceptions -any, mtl -any == ERROR: A failure occurred in build().

Comment by skeksis268 (2013-12-01 18:57) fails build with the following error:

Setup: At least one of the following dependencies are missing: mmap == 0.5.*

This is despite having the latest of haskell-mmap package installed

Comment by thoth (2013-12-15 16:14) +1 here as well (same as skeksis268)

haskell-hashed-storage 0.5.10-1 (lun mar 11 08:26:53 CET 2013) (Paquete sin soporte: podría ser peligroso!) ==> dependencias de haskell-hashed-storage: - ghc (ya instalado) - haskell-dataenc (ya instalado) - haskell-extensible-exceptions (ya instalado) - haskell-mmap (ya instalado) - haskell-mtl (ya instalado) - haskell-zlib (ya instalado) - ghc (ya instalado)

==> Continuar compilando haskell-hashed-storage? [S/n] ==> -------------------------------------------------- ==> ==> Compilando e instalando el paquete ==> AVISO: Compilar un paquete como administrador es peligroso. Ejecute yaourt como usuario normal. ==> Creando el paquete: haskell-hashed-storage 0.5.10-1 (vie ene 10 22:00:52 CET 2014) ==> Resolviendo dependencias... ==> Verificando conflictos... ==> Recibiendo fuentes... -> Descargando hashed-storage-0.5.10.tar.gz... % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 0 0 0 57658 0 0 142k 0 --:--:-- --:--:-- --:--:-- 142k ==> Validando el archivo fuente con md5sums... hashed-storage-0.5.10.tar.gz ... Aprobado ==> Descomprimiendo fuentes... -> Extrayendo hashed-storage-0.5.10.tar.gz con bsdtar ==> Iniciando build()...

Setup.hs:27:3: Warning: In the use of `runTests' (imported from Distribution.Simple, but defined in Distribution.Simple.UserHooks): Deprecated: "Please use the new testing interface instead!" Configuring hashed-storage-0.5.10... Setup: At least the following dependencies are missing: mmap ==0.5.* ==> ERROR: Se produjo un error en build(). Cancelando... ==> ERROR: Makepkg no ha podido compilar haskell-hashed-storage. ==> Reiniciar la compilación de haskell-hashed-storage? [s/N] ==> --------------------------------------------------------- ==> ==> Reiniciar la compilación de darcs? [s/N] ==> ---------------------------------------- ==> ==> Reiniciar la compilación de blink-darcs? [s/N] ==> ---------------------------------------------- ==>

Salutations!

I think you have the wrong list, you want aur-general@archlinux.org

Regards, Mark -- Mark Lee

Your first message is a bloody mess: - Why isn't it in English? - Why would I care about all the comments like 'Comment by thoth (2013-12-15 16:14)' etc? Why not post just the output from makepkg?

In ubuntu and debian works fine. Sorry for spanish post. In english output: ==> Downloading blink-darcs PKGBUILD from AUR... x PKGBUILD Comment by fdservices (2012-05-21 07:34) If this works with python27 shouldit not be updated? Comment by Synthead (2013-01-28 02:43) The documentation calls for Python 2.5 or 2.6, but seems to run ok on Python 2.7. Updated! Comment by Synthead (2013-01-28 02:44) Also, the darcs-bin is an easy way to get darcs on your system without worrying about all the build dependencies ;) Comment by grugnog (2013-03-12 12:25) Getting a segfault when trying making a call with a fresh install of blink and dependencies. Unfortunately it is a hisenbug - since running it with strace works! Will need to try again with gdb at some point. My hunch is that it may be related to https://bugs.launchpad.net/ubuntu/+source/libgcrypt11/+bug/1013798 Comment by gardar (2013-11-15 13:43) Dependency `python2-pyqt' of `blink-darcs' does not exist blink-darcs 20130127-1 (Fri May 13 09:28:12 CEST 2011) ( Unsupported package: Potentially dangerous ! ) ==> blink-darcs dependencies: - python2 (already installed) - python2-application (already installed) - python2-cjson (already installed) - python2-gnutls (already installed) - python2-pyqt (already installed) - twisted (already installed) - python2-eventlib (building from AUR) - python2-sipsimple (building from AUR) - darcs (building from AUR) ==> Continue building blink-darcs ? [Y/n] ==> ------------------------------------- ==> ==> Building and installing package ==> The sources of blink-darcs were kept last time. Use them ? [Y/n] ==> Install or build missing dependencies for blink-darcs: ==> Downloading darcs PKGBUILD from AUR... x PKGBUILD Comment by bretthoerner (2012-12-07 14:57) == Install or build missing dependencies for darcs: error: target not found: haskell-haskeline0.7 Any ideas? Comment by stewSquared (2013-02-26 17:11) I recommend installing from the Haskell Hackage: $ pacman -S cabal-install $ cabal install darcs This way, it's guaranteed to be up-to-date (bonus: haskell-tar and haskell-haskeline are present). Comment by misc (2013-03-11 11:23) Is prepare() still observed by pacman? Had to move its content to build() for it to work. Comment by gtmanfred (2013-03-11 15:53) bah, my bad, prepare doesn't exist until pacman 4.1 I was using it so i wouldn't have to continually configure it Fixing Comment by tzok (2013-06-21 09:52) Please add haskell-utf8-string to makedepends, as it is a required package. darcs 2.8.4-2 (Wed Mar 21 11:49:56 CET 2012) ( Unsupported package: Potentially dangerous ! ) ==> darcs dependencies: - curl (already installed) - gmp (already installed) - ncurses>=5.6-7 (already installed) - ghc (already installed) - haskell-tar (already installed) - haskell-text<0.12 (already installed) - haskell-haskeline (already installed) - haskell-random (already installed) - haskell-vector (already installed) - haskell-html<1.1 (already installed) - haskell-parsec<3.2 (already installed) - haskell-regex-compat (already installed) - haskell-hashed-storage<0.6 (building from AUR) ==> Continue building darcs ? [Y/n] ==> ------------------------------- ==> ==> Building and installing package ==> Install or build missing dependencies for darcs: ==> Downloading haskell-hashed-storage PKGBUILD from AUR... haskell-hashed-storage 0.5.10-1 (Mon Mar 11 08:26:53 CET 2013) ( Unsupported package: Potentially dangerous ! ) ==> haskell-hashed-storage dependencies: - ghc (already installed) - haskell-dataenc (already installed) - haskell-extensible-exceptions (already installed) - haskell-mmap (already installed) - haskell-mtl (already installed) - haskell-zlib (already installed) - ghc (already installed) ==> Continue building haskell-hashed-storage ? [Y/n] ==> ------------------------------------------------ ==> ==> Building and installing package ==> WARNING: Building package as root is dangerous. Please run yaourt as a non-privileged user. ==> Making package: haskell-hashed-storage 0.5.10-1 (Fri Jan 10 23:24:06 CET 2014) ==> Checking runtime dependencies... ==> Checking buildtime dependencies... ==> Retrieving sources... -> Downloading hashed-storage-0.5.10.tar.gz... % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 0 0 0 57658 0 0 169k 0 --:--:-- --:--:-- --:--:-- 169k ==> Validating source files with md5sums... hashed-storage-0.5.10.tar.gz ... Passed ==> Extracting sources... -> Extracting hashed-storage-0.5.10.tar.gz with bsdtar ==> Starting build()... Setup.hs:27:3: Warning: In the use of `runTests' (imported from Distribution.Simple, but defined in Distribution.Simple.UserHooks): Deprecated: "Please use the new testing interface instead!" Configuring hashed-storage-0.5.10... Setup: At least the following dependencies are missing: mmap ==0.5.* ==> ERROR: A failure occurred in build(). Aborting... ==> ERROR: Makepkg was unable to build haskell-hashed-storage. ==> Restart building haskell-hashed-storage ? [y/N] ==> ----------------------------------------------- ==> ==> Restart building darcs ? [y/N] ==> ------------------------------ ==> ==> Restart building blink-darcs ? [y/N] ==> ------------------------------------ ==> I get the source code blink-qt and I have installed blink with python setup.py install When I run the blink: [root@arch-maykel maykel]# blink Traceback (most recent call last): File "/usr/bin/blink", line 24, in <module> from blink import Blink File "/usr/lib/python3.3/site-packages/blink/__init__.py", line 159 except (OSError, IOError), e: ^ SyntaxError: invalid syntax

The package you are trying to install is marked as outdated since November 15th 2013. darcs which is used to install your package is itself marked as outdated outdated. it looks like the program is written in python 2.6 (at least that's what the changelog on their website says, the changelog in their sourcecode isn't up to date...) It seems the whole error you have is not installing "haskell-mmap" which is installed from your output... what I don't understand The error when you run the python code like this is expected, since you are running it with python3, try running "python2 blink" and make sure that your pythonpath environment variable isn't set. for any further assistance I suggest you download the needed aur-tarballs by hand and build them one by one. If you encounter an error, post only the output of building this package 2014/1/10 Anatol Pomozov

Hi

On Fri, Jan 10, 2014 at 2:39 PM, Maykel Franco wrote:

...

2014/1/10 Karol Blazewicz :

...

On Fri, Jan 10, 2014 at 10:09 PM, Maykel Franco wrote:

...

thanks

2014/1/10 Mark Lee :

...

On Fri, 2014-01-10 at 22:02 +0100, Maykel Franco wrote:

...

I cannot install blink-darcs in archlinux...Can I help me please??

What it means is that the package is broken.

Usually you report this kind of problems at AUR page, but the author is inactive (a few of his packages were recently disowned). In this case the best solution is to request 'disown' for this package and fix it by yourself or wait when somebody adopt and fix it for you (usually it happens quickly for popular packages).

2014/1/11 BlissSam :

在 2014-1-11，6:39，Maykel Franco 写道：

...

I get the source code blink-qt and I have installed blink with python setup.py install

When I run the blink:

[root@arch-maykel maykel]# blink Traceback (most recent call last): File "/usr/bin/blink", line 24, in <module> from blink import Blink File "/usr/lib/python3.3/site-packages/blink/__init__.py", line 159 except (OSError, IOError), e: ^ SyntaxError: invalid syntax

You need to python2 setup.py install

Thanks for your responsed. I try install blink with python 2: [root@arch-maykel blink-0.6.0]# python2 setup.py install running install running build running build_py running build_scripts running install_lib running install_scripts changing mode of /usr/bin/blink to 755 running install_data running install_egg_info Removing /usr/lib/python2.7/site-packages/blink-0.6.0-py2.7.egg-info Writing /usr/lib/python2.7/site-packages/blink-0.6.0-py2.7.egg-info And launch with python2: [root@arch-maykel blink-0.6.0]# python2 blink /usr/bin/python2: can't find '__main__' module in 'blink' Am I doing something wrong? Thanks for all.

2014/1/12 Kacper Żuk :

2014/1/12 Maykel Franco :

...

2014/1/11 BlissSam :> Thanks for your responsed. I try install blink with python 2:

[root@arch-maykel blink-0.6.0]# python2 setup.py install running install running build running build_py running build_scripts running install_lib running install_scripts changing mode of /usr/bin/blink to 755 running install_data running install_egg_info Removing /usr/lib/python2.7/site-packages/blink-0.6.0-py2.7.egg-info Writing /usr/lib/python2.7/site-packages/blink-0.6.0-py2.7.egg-info

And launch with python2:

[root@arch-maykel blink-0.6.0]# python2 blink /usr/bin/python2: can't find '__main__' module in 'blink'

Am I doing something wrong?

Try python2 /usr/bin/blink instead of python2 blink.

I try: [maykel@arch-maykel ~]$ python2 /usr/bin/blink Traceback (most recent call last): File "/usr/bin/blink", line 24, in <module> from blink import Blink File "/usr/lib/python2.7/site-packages/blink/__init__.py", line 27, in <module> from eventlib import api ImportError: No module named eventlib

2014/1/12 Kacper Żuk :

2014/1/12 Maykel Franco :

...

2014/1/12 Kacper Żuk :

...

2014/1/12 Maykel Franco :

...

2014/1/11 BlissSam :> Thanks for your responsed. I try install blink with python 2:

[root@arch-maykel blink-0.6.0]# python2 setup.py install running install running build running build_py running build_scripts running install_lib running install_scripts changing mode of /usr/bin/blink to 755 running install_data running install_egg_info Removing /usr/lib/python2.7/site-packages/blink-0.6.0-py2.7.egg-info Writing /usr/lib/python2.7/site-packages/blink-0.6.0-py2.7.egg-info

And launch with python2:

[root@arch-maykel blink-0.6.0]# python2 blink /usr/bin/python2: can't find '__main__' module in 'blink'

Am I doing something wrong?

Try python2 /usr/bin/blink instead of python2 blink.

I try:

[maykel@arch-maykel ~]$ python2 /usr/bin/blink Traceback (most recent call last): File "/usr/bin/blink", line 24, in <module> from blink import Blink File "/usr/lib/python2.7/site-packages/blink/__init__.py", line 27, in <module> from eventlib import api ImportError: No module named eventlib

You have to install eventlib: https://pypi.python.org/pypi/eventlib (remember to use python2 and not python).

[root@arch-maykel maykel]# LC_ALL=C yaourt -S python2-eventlib --noconfirm ==> Downloading python2-eventlib PKGBUILD from AUR... x PKGBUILD python2-eventlib 0.1.1-1 (Mon Dec 3 02:59:29 CET 2012) ( Unsupported package: Potentially dangerous ! ) ==> python2-eventlib dependencies: - python2-greenlet (already installed) - python2-pyopenssl (already installed) ==> Continue building python2-eventlib ? [Y/n] ==> ------------------------------------------ ==> ==> Building and installing package ==> WARNING: Building package as root is dangerous. Please run yaourt as a non-privileged user. ==> Making package: python2-eventlib 0.1.1-1 (Sun Jan 12 15:08:51 CET 2014) ==> Checking runtime dependencies... ==> Checking buildtime dependencies... ==> Retrieving sources... -> Downloading python-eventlib-0.1.1.tar.gz... % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 curl: (22) The requested URL returned error: 404 Not Found ==> ERROR: Failure while downloading python-eventlib-0.1.1.tar.gz Aborting... ==> ERROR: Makepkg was unable to build python2-eventlib. ==> Restart building python2-eventlib ? [y/N] ==> ----------------------------------------- ==>

2014/1/12 Kacper Żuk :

2014/1/12 Maykel Franco :

...

2014/1/12 Kacper Żuk :

...

2014/1/12 Maykel Franco :

...

2014/1/12 Kacper Żuk :

...

2014/1/12 Maykel Franco :

...

2014/1/11 BlissSam :> Thanks for your responsed. I try install blink with python 2:

[root@arch-maykel blink-0.6.0]# python2 setup.py install running install running build running build_py running build_scripts running install_lib running install_scripts changing mode of /usr/bin/blink to 755 running install_data running install_egg_info Removing /usr/lib/python2.7/site-packages/blink-0.6.0-py2.7.egg-info Writing /usr/lib/python2.7/site-packages/blink-0.6.0-py2.7.egg-info

And launch with python2:

[root@arch-maykel blink-0.6.0]# python2 blink /usr/bin/python2: can't find '__main__' module in 'blink'

Am I doing something wrong?

Try python2 /usr/bin/blink instead of python2 blink.

I try:

[maykel@arch-maykel ~]$ python2 /usr/bin/blink Traceback (most recent call last): File "/usr/bin/blink", line 24, in <module> from blink import Blink File "/usr/lib/python2.7/site-packages/blink/__init__.py", line 27, in <module> from eventlib import api ImportError: No module named eventlib

You have to install eventlib: https://pypi.python.org/pypi/eventlib (remember to use python2 and not python).

[root@arch-maykel maykel]# LC_ALL=C yaourt -S python2-eventlib --noconfirm

==> Downloading python2-eventlib PKGBUILD from AUR... x PKGBUILD python2-eventlib 0.1.1-1 (Mon Dec 3 02:59:29 CET 2012) ( Unsupported package: Potentially dangerous ! ) ==> python2-eventlib dependencies: - python2-greenlet (already installed) - python2-pyopenssl (already installed)

==> Continue building python2-eventlib ? [Y/n] ==> ------------------------------------------ ==> ==> Building and installing package ==> WARNING: Building package as root is dangerous. Please run yaourt as a non-privileged user. ==> Making package: python2-eventlib 0.1.1-1 (Sun Jan 12 15:08:51 CET 2014) ==> Checking runtime dependencies... ==> Checking buildtime dependencies... ==> Retrieving sources... -> Downloading python-eventlib-0.1.1.tar.gz... % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 curl: (22) The requested URL returned error: 404 Not Found ==> ERROR: Failure while downloading python-eventlib-0.1.1.tar.gz Aborting... ==> ERROR: Makepkg was unable to build python2-eventlib. ==> Restart building python2-eventlib ? [y/N] ==> ----------------------------------------- ==>

This PKGBUILD is very old, install eventlib the same way you've installed blink.

Downloaded eventlib from : https://pypi.python.org/pypi/eventlib And install python2 setup.py install OK. I try launch blink: [root@arch-maykel eventlib-0.1.5]# python2 /usr/bin/blink Traceback (most recent call last): File "/usr/bin/blink", line 24, in <module> from blink import Blink File "/usr/lib/python2.7/site-packages/blink/__init__.py", line 32, in <module> from sipsimple.account import Account, AccountManager, BonjourAccount ImportError: No module named sipsimple.account Now, I downloaded python-sipsimple from github: https://github.com/grengojbo/python-sipsimple And I when install: [root@arch-maykel python-sipsimple-master]# LC_ALL=C python2 setup.py install running install running build running build_py running build_ext PJSIP SVN tree found, checking SVN repository for updates No updates in PJSIP SVN Using SVN revision 2830 Compiling PJSIP error: Got return value 2 while executing "make", stderr output was: ar: creating ../lib/libpj-x86_64-unknown-linux-gnu.a ar: creating ../lib/libpjlib-util-x86_64-unknown-linux-gnu.a ar: creating ../lib/libpjnath-x86_64-unknown-linux-gnu.a ar: creating ../../lib/libresample-x86_64-unknown-linux-gnu.a ar: creating ../../lib/libmilenage-x86_64-unknown-linux-gnu.a ar: creating ../../lib/libsrtp-x86_64-unknown-linux-gnu.a ar: creating ../../lib/libgsmcodec-x86_64-unknown-linux-gnu.a ar: creating ../../lib/libilbccodec-x86_64-unknown-linux-gnu.a ar: creating ../../lib/libspeex-x86_64-unknown-linux-gnu.a src/pa_unix_hostapis.c:1:61: fatal error: ../../../portaudio/src/os/unix/pa_unix_hostapis.c: No such file or directory #include "../../../portaudio/src/os/unix/pa_unix_hostapis.c" ^ compilation terminated. make[3]: *** [output/libportaudio-x86_64-unknown-linux-gnu/pa_unix_hostapis.o] Error 1 make[2]: *** [libportaudio] Error 2 make[1]: *** [all] Error 1 make: *** [all] Error 1 Thanks for your help.