Hi again once again previoius to the big ooppsss gqrx worked fine with my RTL-SDR Blog V4 no way can i get it to work now it shows up in lsusb as Bus 008 Device 004: ID 0bda:2838 Realtek Semiconductor Corp. RTL2838 DVB-T in the previous setup it did not show the DVB-T i believe that may be the issue but try as i might i can not stop the darn DVB-T in "/usr/lib/udev/rules.d/10-rtl-sdr.rules" as per recomended RTL2832U OEM vid/pid, e.g. ezcap EzTV668 (E4000), Newsky TV28T (E4000/R820T) etc. SUBSYSTEMS=="usb", ATTRS{idVendor}=="0bda", ATTRS{idProduct}=="2838", MODE:="0666" This is already supplied Pete
Do you have rtl-sdr (or rtl-sdr-git) installed? Did you try running rtl_test? [1] [1]: https://wiki.archlinux.org/title/RTL-SDR On Wed, 17 Jan 2024 at 03:38, pete <petegn@mail.com> wrote:
Hi again
once again previoius to the big ooppsss
gqrx worked fine with my RTL-SDR Blog V4
no way can i get it to work now it shows up in lsusb as Bus 008 Device 004: ID 0bda:2838 Realtek Semiconductor Corp. RTL2838 DVB-T
in the previous setup it did not show the DVB-T i believe that may be the issue but try as i might i can not stop the darn DVB-T
in "/usr/lib/udev/rules.d/10-rtl-sdr.rules" as per recomended
RTL2832U OEM vid/pid, e.g. ezcap EzTV668 (E4000), Newsky TV28T (E4000/R820T) etc. SUBSYSTEMS=="usb", ATTRS{idVendor}=="0bda", ATTRS{idProduct}=="2838", MODE:="0666"
This is already supplied
Pete
participants (2)
-
pete
-
Rein Fernhout (Levitating)