Hello, everyone, I'm a freshman in ArchLinux. As my lab owns a printer connected to a windows system, I need to connect it using cups. I read the wiki guide and do as what is told. However, I always receive this messge: Connection failed: NT_STATUS_BAD_NETWORK_NAME My /etc/cups/printers.conf is shown below: # Printer configuration file for CUPS v1.4.2 # Written by cupsd on 2010-01-09 15:32 # DO NOT EDIT THIS FILE WHEN CUPSD IS RUNNING <Printer HpLaserJ> Info RL Printer Location RL Lab Students Printer MakeModel HP LaserJet 1010, hpcups 3.9.12 DeviceURI smb://elegate:jessica@172.16.65.79/print$/ State Stopped StateMessage Processing page 2... StateTime 1263022347 Reason paused Type 36876 Filter application/vnd.cups-raw 0 - Filter application/vnd.cups-raster 0 hpcups Accepting Yes Shared No JobSheets none none QuotaPeriod 0 PageLimit 0 KLimit 0 OpPolicy default ErrorPolicy stop-printer </Printer> <Printer Virtual_PDF_Printer> Info Virtual PDF Printer Location Weiwei's Laptop MakeModel Apple 12/640ps Foomatic/Postscript (recommended) DeviceURI cups-pdf:/ State Idle StateTime 1263021073 Type 8400916 Filter application/vnd.cups-raw 0 - Filter application/vnd.cups-postscript 100 foomatic-rip Filter application/vnd.cups-pdf 0 foomatic-rip Filter application/vnd.apple-pdf 25 foomatic-rip Filter application/vnd.cups-command 0 commandtops Accepting Yes Shared No JobSheets none none QuotaPeriod 0 PageLimit 0 KLimit 0 OpPolicy default ErrorPolicy stop-printer </Printer> And I checked that the printer in the windows system is share with the name hpLaserJ, however when I connect it with smbclient //172.16.65.79/hpLaserJ, i receive NT_STATUS_ACCESS_DENIED so i tried with smbclient //172.16.65.79/print$ and it works fine when i try to list the contents using ls command. That's why I use the name print$ in the printers.conf cups and samba are both definitely running. Samba configuration is shown below: # This is the main Samba configuration file. You should read the # smb.conf(5) manual page in order to understand the options listed # here. Samba has a huge number of configurable options (perhaps too # many!) most of which are not shown in this example # # For a step to step guide on installing, configuring and using samba, # read the Samba-HOWTO-Collection. This may be obtained from: # http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf # # Many working examples of smb.conf files can be found in the # Samba-Guide which is generated daily and can be downloaded from: # http://www.samba.org/samba/docs/Samba-Guide.pdf # # Any line which starts with a ; (semi-colon) or a # (hash) # is a comment and is ignored. In this example we will use a # # for commentry and a ; for parts of the config file that you # may wish to enable # # NOTE: Whenever you modify this file you should run the command "testparm" # to check that you have not made any basic syntactic errors. # #======================= Global Settings ===================================== [global] # workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH workgroup = WORKGROUP # server string is the equivalent of the NT Description field server string = Samba Server # Security mode. Defines in which mode Samba will operate. Possible # values are share, user, server, domain and ads. Most people will want # user level security. See the Samba-HOWTO-Collection for details. security = user # This option is important for security. It allows you to restrict # connections to machines which are on your local network. The # following example restricts access to two C class networks and # the "loopback" interface. For more examples of the syntax see # the smb.conf man page ; hosts allow = 192.168.1. 192.168.2. 127. # If you want to automatically load your printer list rather # than setting them up individually then you'll need this load printers = yes # you may wish to override the location of the printcap file ; printcap name = /etc/printcap # on SystemV system setting printcap name to lpstat should allow # you to automatically obtain a printer list from the SystemV spool # system ; printcap name = lpstat # It should not be necessary to specify the print system type unless # it is non-standard. Currently supported print systems include: # bsd, cups, sysv, plp, lprng, aix, hpux, qnx ; printing = cups # Uncomment this if you want a guest account, you must add this to /etc/passwd # otherwise the user "nobody" is used ; guest account = pcguest # this tells Samba to use a separate log file for each machine # that connects log file = /var/log/samba/%m.log # Put a capping on the size of the log files (in Kb). max log size = 50 # Use password server option only with security = server # The argument list may include: # password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name] # or to auto-locate the domain controller/s # password server = * ; password server = <NT-Server-Name> # Use the realm option only with security = ads # Specifies the Active Directory realm the host is part of ; realm = MY_REALM # Backend to store user information in. New installations should # use either tdbsam or ldapsam. smbpasswd is available for backwards # compatibility. tdbsam requires no further configuration. ; passdb backend = tdbsam # Using the following line enables you to customise your configuration # on a per machine basis. The %m gets replaced with the netbios name # of the machine that is connecting. # Note: Consider carefully the location in the configuration file of # this line. The included file is read at that point. ; include = /usr/local/samba/lib/smb.conf.%m # Configure Samba to use multiple interfaces # If you have multiple network interfaces then you must list them # here. See the man page for details. ; interfaces = 192.168.12.2/24 192.168.13.2/24 # Browser Control Options: # set local master to no if you don't want Samba to become a master # browser on your network. Otherwise the normal election rules apply ; local master = no # OS Level determines the precedence of this server in master browser # elections. The default value should be reasonable ; os level = 33 # Domain Master specifies Samba to be the Domain Master Browser. This # allows Samba to collate browse lists between subnets. Don't use this # if you already have a Windows NT domain controller doing this job ; domain master = yes # Preferred Master causes Samba to force a local browser election on startup # and gives it a slightly higher chance of winning the election ; preferred master = yes # Enable this if you want Samba to be a domain logon server for # Windows95 workstations. ; domain logons = yes # if you enable domain logons then you may want a per-machine or # per user logon script # run a specific logon batch file per workstation (machine) ; logon script = %m.bat # run a specific logon batch file per username ; logon script = %U.bat # Where to store roving profiles (only for Win95 and WinNT) # %L substitutes for this servers netbios name, %U is username # You must uncomment the [Profiles] share below ; logon path = \\%L\Profiles\%U # Windows Internet Name Serving Support Section: # WINS Support - Tells the NMBD component of Samba to enable it's WINS Server ; wins support = yes # WINS Server - Tells the NMBD components of Samba to be a WINS Client # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both ; wins server = w.x.y.z # WINS Proxy - Tells Samba to answer name resolution queries on # behalf of a non WINS capable client, for this to work there must be # at least one WINS Server on the network. The default is NO. ; wins proxy = yes # DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names # via DNS nslookups. The default is NO. dns proxy = no # These scripts are used on a domain controller or stand-alone # machine to add or delete corresponding unix accounts ; add user script = /usr/sbin/useradd %u ; add group script = /usr/sbin/groupadd %g ; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u ; delete user script = /usr/sbin/userdel %u ; delete user from group script = /usr/sbin/deluser %u %g ; delete group script = /usr/sbin/groupdel %g #============================ Share Definitions ============================== [homes] comment = Home Directories browseable = no writable = yes # Un-comment the following and create the netlogon directory for Domain Logons ; [netlogon] ; comment = Network Logon Service ; path = /usr/local/samba/lib/netlogon ; guest ok = yes ; writable = no ; share modes = no # Un-comment the following to provide a specific roving profile share # the default is to use the user's home directory ;[Profiles] ; path = /usr/local/samba/profiles ; browseable = no ; guest ok = yes # NOTE: If you have a BSD-style print system there is no need to # specifically define each individual printer [printers] comment = All Printers path = /var/spool/samba browseable = no # Set public = yes to allow user 'guest account' to print guest ok = no writable = no printable = yes # This one is useful for people to share files ;[tmp] ; comment = Temporary file space ; path = /tmp ; read only = no ; public = yes # A publicly accessible directory, but read only, except for people in # the "staff" group ;[public] ; comment = Public Stuff ; path = /home/samba ; public = yes ; writable = no ; printable = no ; write list = @staff # Other examples. # # A private printer, usable only by fred. Spool data will be placed in fred's # home directory. Note that fred must have write access to the spool directory, # wherever it is. ;[fredsprn] ; comment = Fred's Printer ; valid users = fred ; path = /homes/fred ; printer = freds_printer ; public = no ; writable = no ; printable = yes # A private directory, usable only by fred. Note that fred requires write # access to the directory. ;[fredsdir] ; comment = Fred's Service ; path = /usr/somewhere/private ; valid users = fred ; public = no ; writable = yes ; printable = no # a service which has a different directory for each machine that connects # this allows you to tailor configurations to incoming machines. You could # also use the %U option to tailor it by user name. # The %m gets replaced with the machine name that is connecting. ;[pchome] ; comment = PC Directories ; path = /usr/pc/%m ; public = no ; writable = yes # A publicly accessible directory, read/write to all users. Note that all files # created in the directory by users will be owned by the default user, so # any user with access can delete any other user's files. Obviously this # directory must be writable by the default user. Another user could of course # be specified, in which case all files would be owned by that user instead. ;[public] ; path = /usr/somewhere/else/public ; public = yes ; only guest = yes ; writable = yes ; printable = no # The following two entries demonstrate how to share a directory so that two # users can place files there that will be owned by the specific users. In this # setup, the directory should be writable by both users and should have the # sticky bit set on it to prevent abuse. Obviously this could be extended to # as many users as required. ;[myshare] ; comment = Mary's and Fred's stuff ; path = /usr/somewhere/shared ; valid users = mary fred ; public = no ; writable = yes ; printable = no ; create mask = 0765 I feel really frustrated by this job. Help me~~~~~~~~~~~~~~ -- Weiwei Wang Alex Wang 王巍巍 Room 403, Mengmin Wei Building Computer Science Department Gulou Campus of Nanjing University Nanjing, P.R.China, 210093 Homepage: http://cs.nju.edu.cn/rl/weiweiwang