[arch-general] NVIDIA Corporation GF108GLM [NVS 5200M]
Hi all, I have a Dell Latitude E6430 shipped with this Nvidia device: 01:00.0 VGA compatible controller: NVIDIA Corporation GF108GLM [NVS 5200M] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Dell Device 1534 Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at f5000000 (32-bit, non-prefetchable) [size=16M] Memory at e0000000 (64-bit, prefetchable) [size=256M] Memory at f0000000 (64-bit, prefetchable) [size=32M] I/O ports at e000 [size=128] Expansion ROM at f6000000 [disabled] [size=512K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Capabilities: [b4] Vendor Specific Information: Len=14 <?> Capabilities: [100] Virtual Channel Capabilities: [128] Power Budgeting <?> Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 Kernel driver in use: nouveau My Laptop has VGA and HDMI output, both are used inorder to get a triple display system: on board screen + one on VGA, one on HDMI. Do you have special recommandation on which driver to install and any tip relative to that hardware? Note: Currently using Fedora it works quite well, but I really want to give a try to ARch and want to get my screens as soon as possible :-) Thanks for your help.
Is this a dual graphics (Intel HD / nvidia) machine?
If yes, it can be quite tricky to get all 3 displays working. If you
are lucky then maybe everything works if you just select one of the
cards in the bios, but that is not the case if its anything like my
notebook where the digital output is physically connected to the
Nvidia card, while the analog VGA is connected to the intel.
The bumblebee article on the wiki might be what you will have to look
into. However, it is slightly out of date in the tripple-head section:
* patching the xf86-video-intel package with the virtual-crtc is no
longer necessary, the needed functionality is now in the official
package.
* Instead of the screenclone tool, you can use /usr/bin/intel-virtual-output
On Fri, Apr 4, 2014 at 11:26 AM, Mihamina Rakotomandimby
Hi all,
I have a Dell Latitude E6430 shipped with this Nvidia device:
01:00.0 VGA compatible controller: NVIDIA Corporation GF108GLM [NVS 5200M] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Dell Device 1534 Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at f5000000 (32-bit, non-prefetchable) [size=16M] Memory at e0000000 (64-bit, prefetchable) [size=256M] Memory at f0000000 (64-bit, prefetchable) [size=32M] I/O ports at e000 [size=128] Expansion ROM at f6000000 [disabled] [size=512K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Capabilities: [b4] Vendor Specific Information: Len=14 <?> Capabilities: [100] Virtual Channel Capabilities: [128] Power Budgeting <?> Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 Kernel driver in use: nouveau
My Laptop has VGA and HDMI output, both are used inorder to get a triple display system: on board screen + one on VGA, one on HDMI.
Do you have special recommandation on which driver to install and any tip relative to that hardware?
Note: Currently using Fedora it works quite well, but I really want to give a try to ARch and want to get my screens as soon as possible :-)
Thanks for your help.
Hi, Am 04.04.2014 11:26, schrieb Mihamina Rakotomandimby:
Note: Currently using Fedora it works quite well, but I really want to give a try to ARch and want to get my screens as soon as possible
As far as I know Fedora uses nouveau by default, so it will probably work with Arch just "out-of-the-box", too (at least as "out-of-the-box" as it gets with Arch). Best regards, Karol Babioch
On 04/04/2014 01:09 PM, Bruno Widmann wrote:
Is this a dual graphics (Intel HD / nvidia) machine?
It's not a dual graphics. One card, NVidia. Dell E6430 are shipped with Intel graphics when sold with i3 or i5 CPU, and NVidia when i7 CPU. Thanks.
On 04/04/2014 01:43 PM, Karol Babioch wrote:
Note: Currently using Fedora it works quite well, but I really want to give a try to ARch and want to get my screens as soon as possible
As far as I know Fedora uses nouveau by default, so it will probably work with Arch just "out-of-the-box", too (at least as "out-of-the-box" as it gets with Arch).
OK, thank you. The other parts of the laptop are well supported. The only doubt is on the NVidia card ;-)
participants (3)
-
Bruno Widmann
-
Karol Babioch
-
Mihamina Rakotomandimby