Re: [arch-general] Powertop tunables and performance + Other optimizations
2012/5/31 Martin Cigorraga <msx@archlinux.us>:
From my subjective own experience, it don't, the only thing I don't activate when my laptop is plugged is the mouse switch since it instructs the system to turnoff the USB port whenever there's no activity on it and that can be very annoying, believe me xD
I've been playing interactively with the tunables, and completely agree about how annoying is the auto suspend for the USB mouse :P. I'll probably make all the others permanent.
Combining Powertop 2 with Liquorix kernel, Ulatencyd, e4rat, preload and some more fancy tweakes here and there -sysctl.conf, grub kernel line, etc.- I have a feather-light, lightspeed KDE SC full suite with every eye candy effect on and the best part is my notebook -Pavilion dv7-4287cl- reminds _cool_ all the time.
Sounds really nice. I've never heard about the kernel and software you mention, and after reading about them it sounds really interesting. Do you have any reference (website/blog/wiki/whatever) with these optimizations, apart from the Arch Wiki?
On 31 May 2012 10:31, Sergi Pons Freixes <sachiel2014@gmail.com> wrote:
2012/5/31 Martin Cigorraga <msx@archlinux.us>:
From my subjective own experience, it don't, the only thing I don't activate when my laptop is plugged is the mouse switch since it instructs the system to turnoff the USB port whenever there's no activity on it and that can be very annoying, believe me xD
I've been playing interactively with the tunables, and completely agree about how annoying is the auto suspend for the USB mouse :P. I'll probably make all the others permanent.
Combining Powertop 2 with Liquorix kernel, Ulatencyd, e4rat, preload and some more fancy tweakes here and there -sysctl.conf, grub kernel line, etc.- I have a feather-light, lightspeed KDE SC full suite with every eye candy effect on and the best part is my notebook -Pavilion dv7-4287cl- reminds _cool_ all the time.
Sounds really nice. I've never heard about the kernel and software you mention, and after reading about them it sounds really interesting. Do you have any reference (website/blog/wiki/whatever) with these optimizations, apart from the Arch Wiki?
Sorry for the delay amigo català, this is what I do to squeeze the most of my system -meaning 'system' the combination of hardware and software-, depending on your own hardware and software choices/combination it may or may not help you at all or even worst, leave your system unusable... with that in mind check out my following tweaks: 1. HW SPECS: My laptop is a Pavilion dv7-4287cl, a first-gen i5 (Quad, 2,66mhz), 8gbRAM, 720hd5400rpm, hybrid video system sporting an ATi Radeon HD 5600 series. ~ $ lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05) 01:00.0 VGA compatible controller: ATI Technologies Inc Madison [Radeon HD 5000M Series] (rev ff) 01:00.1 Audio device: ATI Technologies Inc Redwood HDMI Audio [Radeon HD 5600 Series] (rev ff) 02:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 7f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) 7f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) 7f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) 7f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) 7f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) 7f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Make sure to check out the microcode kmod! (actually in [extra]) 2. KERNEL As you note this laptop runs nearly enterily Intel chipset so if your PC(s) runs AMD take for sure much of the kernel line tweaks will not work since their meant for Intel hardware. I have several entries in my GRUB but the one I boot most is this following: kernel /boot/vmlinuz-linux-lqx root=/dev/sda2 ro rootfstype=ext4 hpet=force i915.i915_enable_rc6=1 pcie_aspm=force irqpoll i915.lvds_downclock=1 radeon.pcie_gen2=1 i915.semaphores=1 elevator=bfs init=/usr/sbin/e4rat-preload-lite resume=/dev/sda2 acpi_backlight=vendor rootfstype=ext4 : I forget to remove it, actually it isn't needed. hpet=force i915.i915_enable_rc6=1 i915.lvds_downclock=1 i915.semaphores=1 : these tweaks are meant for Intel chipset to preserve battery life - I can't notice any performance hit with them on. pcie_aspm=force : makes sure it's activated. radeon.pcie_gen2=1 : boosts F/LOSS radeon module - only for ATi RadeonHD videocards elevator=bfs : makes sure the Brain Fuck Scheduler is enabled. init=/usr/sbin/e4rat-preload-lite : enable e4rat-lite optimizations. resume=/dev/sda2 : restore from hibernation - in the event I hibernate my laptop; most of time I just suspend it [0] acpi_backlight=vendor : needs this to be able to control screen bright within KDE SC. irqpoll : it's not until recent kernels my crappy hardware works smooth, I used to need this at boot time to force kernel assign IRQs in a clean way. (I suggest to google all of these to get a wider idea about what they are and what they do) I'm currently running the Liquorix kernel 3.4.2-1-lqx #1 ZEN SMP PREEMPT and it works great, KDE SC feels a lot more responsive than the stock kernel, however you might want to check this Phoronix entry [1] before making your choice. 3. /etc/sysctl.conf Check it at http://pastebin.com/Tb0WtihW 4. /etc/rc.conf There're a number of modules and daemons that can help you achieve a responsive desktop while at the same time keep the power consumption minimal: MODULES=(microcode acpi-cpufreq fuse cpufreq_ondemand cpufreq_performance cpufreq_conservative cpufreq_powersave autofs4) DAEMONS=(hwclock syslog-ng dbus !wicd ufw !network !netfs networkmanager preload !ntpd irqbalance ulatencyd @crond acpid cpufreq colord dnscrypt-proxy laptop-mode rpcbind nfs-common !sensors !sensord !avahi-daemon !avahi-dnsconfd autofs sshd !kdm) preload : helps speed up system files loading by caching them in memory. irqbalance : does what it's named after :) ulatencyd : a *MUST* if you run KDE SC with composite enabled. It works by tweaking CGROUPS kernel feature on the fly to adjust CPU workload so your KDE SC system behaves like if you were running dwm. laptop-mode : helps maximize battery life. Verynice is another good daemon to have in mind; while I find ulatencyd makes a better job with KDE SC, verynice is useful if you *not* run KDE SC but still wants some kind of workload manager. I found ulatencyd is heavier on resources than verynice but handles better KDE SC so in the long run it makes a better job, on the other side I tend to install verynice on every other machine I do not install ulatencyd. 5. PowerTOP2 It's a bit frustrating to have to activate it everytime the computer wakes up but for me it's a _must_. I added the executable to the wheel group in the sudoers file so I don't need to enter my pwd every time I launch it - I don't like much the idea but didn't find a better way, it's the eternal trade-off between security and usability o_o I can't think about anything much else I've done so far to both optimize overall computing experience and save battery charge when not plugged; when on the road I tend to work the much as I can with the console (thanks tmux!) and launch dwm when I need a graphical application, this way I minimize X server impact on battery life. These optimizations comes from the wiki and from over the net -from AskUbuntu for example- and I don't remember anymore were I found this or that one but I'm sure the original posts are easy to find as well new and better ways to optimize your system, there's plenty room to improve here so I would love to hear if you have any tip to share about it :) Happy tweaking! [0] http://xkcd.com/705/ [1] http://www.phoronix.com/scan.php?page=article&item=linux_liquorix_32&num=1 -- -msx
participants (2)
-
Martin Cigorraga
-
Sergi Pons Freixes