[arch-ports] [amd64] neverball works - Arch-ports - lists.archlinux.org

newer
[arch-ports] [arch64] openbabel...

[arch-ports] [amd64] neverball works

older
[arch-ports] [arch64] xdrawchem...

Ivan Stankovic

5 May 2006 5 May '06

7:59 p.m.

Hi all, Here's the PKGBUILD for neverball, the only difference from the original PKGBUILD is in the -march flag (x86-64 instead of i686). -- Ivan Stankovic, ivan.stankovic@fer.hr

Attachments:

PKGBUILD.txt (text/plain — 1.2 KB)

Show replies by thread

Jason Chu

5 May 5 May

8:27 p.m.

/bin/sed -i -e 's/CFLAGS= -Wall -O3 -ansi $(shell sdl-config --cflags)/CFLAGS= -Wall -O3 -march=x86-64 -pipe -ansi $(shell sdl-config --cflags)/' Makefile

You should be able to use the $CARCH variable instead of x86-64. Then it'll work in both architectures. Jason -- If you understand, things are just as they are. If you do not understand, things are just as they are.

Ivan Stankovic

9:07 p.m.

On Fri, May 05, 2006 at 04:27:23PM -0400, Jason Chu wrote:

...
/bin/sed -i -e 's/CFLAGS= -Wall -O3 -ansi $(shell sdl-config --cflags)/CFLAGS= -Wall -O3 -march=x86-64 -pipe -ansi $(shell sdl-config --cflags)/' Makefile

You should be able to use the $CARCH variable instead of x86-64. Then it'll work in both architectures.

Thanks for pointing this out. But one can't directly change x86-64 to $CARCH since $CARCH=x86_64 (note the underscore). Anyway, here's the updated PKGBUILD. -- Ivan Stankovic, ivan.stankovic@fer.hr

Jason Chu

9:59 p.m.

On Fri, May 05, 2006 at 11:07:12PM +0200, Ivan Stankovic wrote:

On Fri, May 05, 2006 at 04:27:23PM -0400, Jason Chu wrote:

...
...
/bin/sed -i -e 's/CFLAGS= -Wall -O3 -ansi $(shell sdl-config --cflags)/CFLAGS= -Wall -O3 -march=x86-64 -pipe -ansi $(shell sdl-config --cflags)/' Makefile

You should be able to use the $CARCH variable instead of x86-64. Then it'll work in both architectures.

Thanks for pointing this out. But one can't directly change x86-64 to $CARCH since $CARCH=x86_64 (note the underscore). Anyway, here's the updated PKGBUILD.

That's strange. CARCH is supposed to be the value put into -march... I wonder why you'd choose a different value... Jasen -- If you understand, things are just as they are. If you do not understand, things are just as they are.

Ivan Stankovic

10:20 p.m.

On Fri, May 05, 2006 at 05:59:09PM -0400, Jason Chu wrote:

On Fri, May 05, 2006 at 11:07:12PM +0200, Ivan Stankovic wrote:

...
On Fri, May 05, 2006 at 04:27:23PM -0400, Jason Chu wrote:

...
...
/bin/sed -i -e 's/CFLAGS= -Wall -O3 -ansi $(shell sdl-config --cflags)/CFLAGS= -Wall -O3 -march=x86-64 -pipe -ansi $(shell sdl-config --cflags)/' Makefile

You should be able to use the $CARCH variable instead of x86-64. Then it'll work in both architectures.

Thanks for pointing this out. But one can't directly change x86-64 to $CARCH since $CARCH=x86_64 (note the underscore). Anyway, here's the updated PKGBUILD.

That's strange. CARCH is supposed to be the value put into -march... I wonder why you'd choose a different value...

Here's what I have in my unmodified makepkg.conf: $ cat /etc/makepkg.conf | grep CARCH export CARCH="x86_64" -- Ivan Stankovic, ivan.stankovic@fer.hr

Andreas Radke

11:55 p.m.

Am Fri, 5 May 2006 23:07:12 +0200 schrieb Ivan Stankovic :

On Fri, May 05, 2006 at 04:27:23PM -0400, Jason Chu wrote:

...
...
/bin/sed -i -e 's/CFLAGS= -Wall -O3 -ansi $(shell sdl-config --cflags)/CFLAGS= -Wall -O3 -march=x86-64 -pipe -ansi $(shell sdl-config --cflags)/' Makefile

You should be able to use the $CARCH variable instead of x86-64. Then it'll work in both architectures.

Thanks for pointing this out. But one can't directly change x86-64 to $CARCH since $CARCH=x86_64 (note the underscore). Anyway, here's the updated PKGBUILD.

They set more optimized CFLAGS. So we cannot use $CARCH. Your PKGBUILD looks ok. AndyRTR

Jason Chu

6 May 6 May

12:27 a.m.

On Sat, 6 May 2006 01:55:59 +0200 Andreas Radke wrote:

Am Fri, 5 May 2006 23:07:12 +0200 schrieb Ivan Stankovic :

...
On Fri, May 05, 2006 at 04:27:23PM -0400, Jason Chu wrote:

...
...
/bin/sed -i -e 's/CFLAGS= -Wall -O3 -ansi $(shell sdl-config --cflags)/CFLAGS= -Wall -O3 -march=x86-64 -pipe -ansi $(shell sdl-config --cflags)/' Makefile

You should be able to use the $CARCH variable instead of x86-64. Then it'll work in both architectures.

Thanks for pointing this out. But one can't directly change x86-64 to $CARCH since $CARCH=x86_64 (note the underscore). Anyway, here's the updated PKGBUILD.

They set more optimized CFLAGS. So we cannot use $CARCH. Your PKGBUILD looks ok.

AndyRTR

My point is that you should be able to say -march=$CARCH and if CARCH=x86_64, you can't do that. Jason

Andreas Radke

12:29 a.m.

Am Sat, 6 May 2006 01:55:59 +0200 schrieb Andreas Radke :

Am Fri, 5 May 2006 23:07:12 +0200 schrieb Ivan Stankovic :

...
On Fri, May 05, 2006 at 04:27:23PM -0400, Jason Chu wrote:

...
...
/bin/sed -i -e 's/CFLAGS= -Wall -O3 -ansi $(shell sdl-config --cflags)/CFLAGS= -Wall -O3 -march=x86-64 -pipe -ansi $(shell sdl-config --cflags)/' Makefile

You should be able to use the $CARCH variable instead of x86-64. Then it'll work in both architectures.

Thanks for pointing this out. But one can't directly change x86-64 to $CARCH since $CARCH=x86_64 (note the underscore). Anyway, here's the updated PKGBUILD.

They set more optimized CFLAGS. So we cannot use $CARCH. Your PKGBUILD looks ok.

AndyRTR

_______________________________________________ arch-ports mailing list arch-ports@archlinux.org http://www.archlinux.org/mailman/listinfo/arch-ports

Is it working for you? I even lowered the CFLAGS using the Frugal cflags.patch but I always get this: [andyrtr@workstation64 neverball]$ neverball NVIDIA: could not open the device file /dev/nvidiactl (No such file or directory). Fatal signal: Segmentation Fault (SDL Parachute Deployed) [andyrtr@workstation64 neverball]$

Ivan Stankovic

11:54 a.m.

On Sat, May 06, 2006 at 02:29:35AM +0200, Andreas Radke wrote:

Is it working for you? I even lowered the CFLAGS using the Frugal cflags.patch but I always get this:

[andyrtr@workstation64 neverball]$ neverball NVIDIA: could not open the device file /dev/nvidiactl (No such file or directory). Fatal signal: Segmentation Fault (SDL Parachute Deployed) [andyrtr@workstation64 neverball]$

Strange, the game works perfectly fine here, I played a couple of levels and everything seems ok. -- Ivan Stankovic, pokemon@fly.srk.fer.hr

Andreas Radke

12:12 p.m.

Am Sat, 6 May 2006 13:54:48 +0200 schrieb Ivan Stankovic :

On Sat, May 06, 2006 at 02:29:35AM +0200, Andreas Radke wrote:

...
Is it working for you? I even lowered the CFLAGS using the Frugal cflags.patch but I always get this:

[andyrtr@workstation64 neverball]$ neverball NVIDIA: could not open the device file /dev/nvidiactl (No such file or directory). Fatal signal: Segmentation Fault (SDL Parachute Deployed) [andyrtr@workstation64 neverball]$

Strange, the game works perfectly fine here, I played a couple of levels and everything seems ok.

after a reboot it is working for me now. i'll uplload it. Andy

6590

Age (days ago)

6591

Last active (days ago)

Download

9 comments

3 participants

tags

participants (3)

Andreas Radke
Ivan Stankovic
Jason Chu