October 2011 - Arch-projects - lists.archlinux.org

[arch-projects] [PATCH 1/2] rc.shutdown: reorder a bit
by Tom Gundersen 14 Nov '11

14 Nov '11

The new ordering is now: 1) book-keeping 2) shutting down and killing processes 3) swapoff 4) unmounting and tearing down of block devices The reason to move 1) to the top is so it will not interfere with the killing of processes. The reason for not moving 3) to the top as well is that we want to minimize the amount of stuff that has to be moved from swap to ram. However, swapoff must happen before 4) as we don't know what is under the swap device/file. Added a TODO: unmount any devices backed by swap (tmpfs/ramfs) to make sure that their contents is thrown away rather than moved to ram. In principle we might get OOM on shutdown due to the current situation, but in most cases the only problem should be that shutdown is unecessarily slow. Thanks to Dan and Dave for prompting me to look into this. Cc: Dan McGee <dpmcgee(a)gmail.com> Cc: Dave Reisner <d(a)falconindy.com> Signed-off-by: Tom Gundersen <teg(a)jklm.no> --- rc.shutdown | 34 ++++++++++++++++++++-------------- 1 files changed, 20 insertions(+), 14 deletions(-) diff --git a/rc.shutdown b/rc.shutdown index 5928b2d..1946068 100755 --- a/rc.shutdown +++ b/rc.shutdown @@ -19,20 +19,6 @@ run_hook shutdown_start stop_all_daemons -status "Shutting down UDev" udevadm control --exit - -status "Deactivating Swap" swapoff -a - -# stop monitoring of lvm2 groups before unmounting filesystems -[[ $USELVM = [Yy][Ee][Ss] && -x $(type -P lvm) ]] && - status "Deactivating monitoring of LVM2 groups" vgchange --monitor n - -run_hook shutdown_prekillall - -kill_all - -run_hook shutdown_postkillall - stat_busy "Saving Random Seed" RANDOM_SEED=/var/lib/misc/random-seed install -TDm 0600 /dev/null $RANDOM_SEED @@ -51,6 +37,26 @@ stat_done # Write to wtmp file before unmounting halt -w +# stop monitoring of lvm2 groups before unmounting filesystems +[[ $USELVM = [Yy][Ee][Ss] && -x $(type -P lvm) ]] && + status "Deactivating monitoring of LVM2 groups" vgchange --monitor n + +# any future uevents can and should be ignored +status "Shutting down UDev" udevadm control --exit + +run_hook shutdown_prekillall + +kill_all + +run_hook shutdown_postkillall + +# TODO: unmount any non-api partitions that are backed by swap, we don't want to +# move their contents into memory (waste of time and might caues OOM). + +# almost everything is dead now, so the swap should hopefully be relatively +# empty, and quick to switch off +status "Deactivating Swap" swapoff -a + # if we don't have devtmpfs support, /dev is mounted as tmpfs, so don't unmount it status "Unmounting Filesystems" \ umount -a -r -t nodevtmpfs,notmpfs,nosysfs,noproc,nodevpts -O no_netdev -- 1.7.7.1

3 6

[arch-projects] arch-projects@archlinux.org Rolex -95%
by ROLEX.COM 31 Oct '11

31 Oct '11

1 0

[arch-projects] Arch Linux initscripts (killall)
by C Anthony Risinger 30 Oct '11

30 Oct '11

On Oct 29, 2011 4:58 PM, "Tom Gundersen" <tomegun(a)archlinux.org> wrote: > > In principle, I'm worried that, with the right ammonut of bad luck, > we could fork off some process at exactly the wrong time which escapes > the killall logic. > > This, by the way, highlights the frailty of the killall stuff. Why not make use of the `name` cgroup in same way systemd does? Then you can simply: kill $(</path/to/cgroup/tasks) ... in a loop for a couple iterations as needed. C Anthony

1 0

[arch-projects] [initscripts] [GIT] Arch Linux initscripts repository branch master updated. 2011.10.2-6-g00070ec
by tomegun＠archlinux.org 29 Oct '11

29 Oct '11

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Arch Linux initscripts repository". The branch, master has been updated via 00070eca730dec9c6d587cc1639f6abaca83fa34 (commit) via fbff8c64e2be9cbb24bd7f824552842d0bd6442d (commit) via 1fdaa33f06786231da3b86e5d8b646b46f6ca1f9 (commit) via e46ee7e6c9fbbd8d21c306719170ae086cf12761 (commit) via 697aa90c7eede255635f9c6d2e7fe12338aa2886 (commit) via 559175f82d6320af8855c34b7e4b9b3cb4a3ad9a (commit) from 750db158fca0681273b65b354716469168e341c1 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- commit 00070eca730dec9c6d587cc1639f6abaca83fa34 Author: Tom Gundersen <teg(a)jklm.no> Date: Wed Oct 26 23:11:20 2011 +0200 minilogd: kill This is not very useful, is not maintained, has open serious bugs. Better to admit that it does not work and just remove it. Someone could easily make an AUR package with a hook, if they want it and can make it work as expected. The only case where this would be useful is in case lvm monitoring is in use and dmeventd sends out a message to syslog before syslog-ng is started (there is a very small window). However, not even this works atm (as far as I know) due to bugs in minilogd. Signed-off-by: Tom Gundersen <teg(a)jklm.no> Signed-off-by: Dan McGee <dan(a)archlinux.org> commit fbff8c64e2be9cbb24bd7f824552842d0bd6442d Author: Tom Gundersen <teg(a)jklm.no> Date: Mon Oct 24 21:34:14 2011 +0200 locale: fix locale.sh for zsh Uglier script, but should now work with zsh as well as bash. v2: only read rc.conf if LANG is not set in locale.conf, no functional change. Based on suggestion by Dave. Signed-off-by: Tom Gundersen <teg(a)jklm.no> commit 1fdaa33f06786231da3b86e5d8b646b46f6ca1f9 Author: Tom Gundersen <teg(a)jklm.no> Date: Sun Oct 23 21:03:46 2011 +0200 udev: binary moved, require 174 commit e46ee7e6c9fbbd8d21c306719170ae086cf12761 Author: Tom Gundersen <teg(a)jklm.no> Date: Sun Oct 23 18:02:20 2011 +0200 udev: exit on shutdown udev was receiving some events (due to e.g. swapoff) on shutdown that caused it to fork new processes. These then receivde TERM before they could finish, and complained on the console. In principle, I'm worried that, with the right ammonut of bad luck, we could fork off some process at exactly the wrong time which escapes the killall logic. This, by the way, highlights the frailty of the killall stuff. Signed-off-by: Tom Gundersen <teg(a)jklm.no> commit 697aa90c7eede255635f9c6d2e7fe12338aa2886 Author: Tom Gundersen <teg(a)jklm.no> Date: Sat Oct 22 14:21:48 2011 +0200 bits, bytes, who cares? Signed-off-by: Tom Gundersen <teg(a)jklm.no> commit 559175f82d6320af8855c34b7e4b9b3cb4a3ad9a Author: Tom Gundersen <teg(a)jklm.no> Date: Wed Oct 19 10:20:41 2011 +0200 config: add /etc/vconsole.conf support Read KEYMAP, CONSOLEFONT and CONSOLEMAP from vconsole.conf. If they are set they take precedence over the values in rc.conf. Signed-off-by: Tom Gundersen <teg(a)jklm.no> ----------------------------------------------------------------------- Summary of changes: .gitignore | 2 - Makefile | 10 +-- PKGBUILD | 4 +- functions | 2 +- locale.sh | 81 ++++++++++++++++++++++-- minilogd.c | 202 ----------------------------------------------------------- rc.shutdown | 3 + rc.sysinit | 13 +++- 8 files changed, 96 insertions(+), 221 deletions(-) delete mode 100644 minilogd.c hooks/post-receive -- Arch Linux initscripts repository

1 0

[arch-projects] [devtools][PATCH] makechrootpkg : Prevent erroring out on sources signatures check
by Eric Bélanger 29 Oct '11

29 Oct '11

Signed-off-by: Eric Bélanger <snowmaniscool(a)gmail.com> --- Ideally, this should be done in the chrootdir so we can keep the public keys in the chroot. At least with this patch, the package is built instead of just aborting. We can check the source signature on the main system and ignore the warning message about public keys not found when building in the chroot. --- makechrootpkg.in | 5 ++++- 1 files changed, 4 insertions(+), 1 deletions(-) diff --git a/makechrootpkg.in b/makechrootpkg.in index 9794132..67d3100 100644 --- a/makechrootpkg.in +++ b/makechrootpkg.in @@ -217,6 +217,9 @@ if [[ -n $PACKAGER ]]; then echo "PACKAGER='${PACKAGER}'" >> "$copydir/etc/makepkg.conf" fi +# Create directory to check the sources signatures +mkdir "$copydir/.gnupg" + # Set target CARCH as it might be used within the PKGBUILD to select correct sources eval $(grep '^CARCH=' "$copydir/etc/makepkg.conf") export CARCH @@ -245,7 +248,7 @@ cp PKGBUILD "$copydir/build/" done ) -chown -R nobody "$copydir"/{build,pkgdest,srcdest} +chown -R nobody "$copydir"/{build,pkgdest,srcdest,.gnupg} echo 'nobody ALL = NOPASSWD: /usr/bin/pacman' > "$copydir/etc/sudoers.d/nobody-pacman" chmod 440 "$copydir/etc/sudoers.d/nobody-pacman" -- 1.7.7

2 1

[arch-projects] [PATCH 1/7] config: add /etc/hostname support
by Tom Gundersen 29 Oct '11

29 Oct '11

If /etc/hostname is non-empty its contents is assumed to be the hostname. This takes precedence over HOSTNAME in rc.conf. Signed-off-by: Tom Gundersen <teg(a)jklm.no> --- rc.sysinit | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-) diff --git a/rc.sysinit b/rc.sysinit index dffea4d..3e5fec9 100755 --- a/rc.sysinit +++ b/rc.sysinit @@ -232,6 +232,9 @@ RANDOM_SEED=/var/lib/misc/random-seed # Remove leftover files remove_leftover +if [[ -s /etc/hostname ]]; then + HOSTNAME=$(cat /etc/hostname) +fi if [[ $HOSTNAME ]]; then stat_busy "Setting Hostname: $HOSTNAME" echo "$HOSTNAME" >| /proc/sys/kernel/hostname && stat_done || stat_fail -- 1.7.7.1

6 30

[arch-projects] [PATCH] [devtools] Have signature checking work in chroots
by Allan McRae 28 Oct '11

28 Oct '11

Adjust the mount options for /dev/pts to allow signature checking with gpgme to work. Adjust the various pacman.confs to use "SigLevel = Optional TrustAll" which is the best that can be done automatically with Arch repos at the moment. Signed-off-by: Allan McRae <allan(a)archlinux.org> --- I'm not sure exactly what other consequences there are from removing "newinstance" from the /dev/pts mount options but this appears to work... mkarchroot.in | 2 +- pacman-extra.conf | 2 -- pacman-multilib-testing.conf | 4 +--- pacman-multilib.conf | 4 +--- pacman-staging.conf | 4 +--- pacman-testing.conf | 4 +--- 6 files changed, 5 insertions(+), 15 deletions(-) diff --git a/mkarchroot.in b/mkarchroot.in index 0debb13..4db3032 100644 --- a/mkarchroot.in +++ b/mkarchroot.in @@ -110,7 +110,7 @@ chroot_mount() { mount -t tmpfs shm "${working_dir}/dev/shm" -o nodev,nosuid,size=128M [ -e "${working_dir}/dev/pts" ] || mkdir "${working_dir}/dev/pts" - mount -t devpts devpts "${working_dir}/dev/pts" -o newinstance,ptmxmode=666 + mount -t devpts devpts "${working_dir}/dev/pts" -o ptmxmode=666 ln -s pts/ptmx "${working_dir}/dev/ptmx" [ -e "${cache_dir}" ] || mkdir -p "${cache_dir}" diff --git a/pacman-extra.conf b/pacman-extra.conf index cdad265..898f9ba 100644 --- a/pacman-extra.conf +++ b/pacman-extra.conf @@ -47,8 +47,6 @@ Architecture = auto # the following line. This will treat any key imported into pacman's keyring as # trusted. SigLevel = Optional TrustAll -# Disable signature checks for now -SigLevel = Never # # REPOSITORIES diff --git a/pacman-multilib-testing.conf b/pacman-multilib-testing.conf index b7e59f6..e2591cf 100644 --- a/pacman-multilib-testing.conf +++ b/pacman-multilib-testing.conf @@ -46,9 +46,7 @@ Architecture = auto # If you wish to check signatures but avoid local sign and trust issues, use # the following line. This will treat any key imported into pacman's keyring as # trusted. -#SigLevel = Optional TrustAll -# Disable signature checks for now -SigLevel = Never +SigLevel = Optional TrustAll # # REPOSITORIES diff --git a/pacman-multilib.conf b/pacman-multilib.conf index 709361e..e0dae7b 100644 --- a/pacman-multilib.conf +++ b/pacman-multilib.conf @@ -46,9 +46,7 @@ Architecture = auto # If you wish to check signatures but avoid local sign and trust issues, use # the following line. This will treat any key imported into pacman's keyring as # trusted. -#SigLevel = Optional TrustAll -# Disable signature checks for now -SigLevel = Never +SigLevel = Optional TrustAll # # REPOSITORIES diff --git a/pacman-staging.conf b/pacman-staging.conf index 9d8e23e..ae497d1 100644 --- a/pacman-staging.conf +++ b/pacman-staging.conf @@ -46,9 +46,7 @@ Architecture = auto # If you wish to check signatures but avoid local sign and trust issues, use # the following line. This will treat any key imported into pacman's keyring as # trusted. -#SigLevel = Optional TrustAll -# Disable signature checks for now -SigLevel = Never +SigLevel = Optional TrustAll # # REPOSITORIES diff --git a/pacman-testing.conf b/pacman-testing.conf index 70b0249..8d1b6c5 100644 --- a/pacman-testing.conf +++ b/pacman-testing.conf @@ -46,9 +46,7 @@ Architecture = auto # If you wish to check signatures but avoid local sign and trust issues, use # the following line. This will treat any key imported into pacman's keyring as # trusted. -#SigLevel = Optional TrustAll -# Disable signature checks for now -SigLevel = Never +SigLevel = Optional TrustAll # # REPOSITORIES -- 1.7.7

2 2

[arch-projects] [mkinitcpio] [GIT] The official mkinitcpio repository branch master updated. 0.7.5-1-gcb67917
by dreisner＠archlinux.org 25 Oct '11

25 Oct '11

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "The official mkinitcpio repository". The branch, master has been updated via cb67917fbfaf268316f3c56c804dacb0bd272fd7 (commit) from 6ed825e4399ffd8768b803c3e8372c37f5fb55d1 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- commit cb67917fbfaf268316f3c56c804dacb0bd272fd7 Author: Dave Reisner <dreisner(a)archlinux.org> Date: Mon Oct 24 19:06:47 2011 -0400 mkinitcpio: dereference symlinks when resolving kernver Signed-off-by: Dave Reisner <dreisner(a)archlinux.org> ----------------------------------------------------------------------- Summary of changes: mkinitcpio | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) hooks/post-receive -- The official mkinitcpio repository

1 0

[arch-projects] [devtools] [PATCH] commitpkg: Sync changelog/install check with makepkg(8)
by Lukas Fleischer 24 Oct '11

24 Oct '11

makepkg(8) currently uses a smarter method to extract all changelog and install files from a PKGBUILD. Sync commitpkg to use the same code (with small modifications). This also adds support for changelog/install files that contain a whitespace. Signed-off-by: Lukas Fleischer <archlinux(a)cryptocrack.de> --- commitpkg.in | 7 +++---- 1 files changed, 3 insertions(+), 4 deletions(-) diff --git a/commitpkg.in b/commitpkg.in index 2a732b5..43cc015 100644 --- a/commitpkg.in +++ b/commitpkg.in @@ -86,14 +86,13 @@ done # check if changelog and install files are under version control for i in 'changelog' 'install'; do - filelist=$(sed -n "s/^[[:space:]]*$i=//p" PKGBUILD) - for file in $filelist; do + while read -r file; do # evaluate any bash variables used - eval file=${file} + eval file=\"$(sed 's/^$['\''"]$$.*$\1$/\2/' <<< "$file")\" if ! svn status -v "${file}" | grep -q '^[ AMRX~]'; then abort "${file} is not under version control" fi - done + done < <(sed -n "s/^[[:space:]]*$i=//p" PKGBUILD) done # see if any limit options were passed, we'll send them to rsync -- 1.7.7

1 0

[arch-projects] [mkinitcpio] [GIT] The official mkinitcpio repository annotated tag 0.7.5 created. 0.7.5
by dreisner＠archlinux.org 23 Oct '11

23 Oct '11

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "The official mkinitcpio repository". The annotated tag, 0.7.5 has been created at 47adefb4afa8522b994e993a141be9e740775f8f (tag) tagging 6ed825e4399ffd8768b803c3e8372c37f5fb55d1 (commit) replaces 0.7.4 tagged by Dave Reisner on Sun Oct 23 14:49:50 2011 -0400 - Log ----------------------------------------------------------------- Release 0.7.5 Dave Reisner (11): init: refer to busybox by full path on --install move manpage to section 8 mkinitcpio: avoid stomping on TMPDIR from the environment mkinitcpio: ensure get_kernver always returns a kver install/pcmcia: fix syntax error (missing &&) manpage: correct section number in manpage header install/udev: relocate udevd for udev 174 install/base: include new_root as part of build process init_functions: tighten up mount option gathering init_functions: replace grep/sed with PEs init_functions: avoid setting var without LHS ----------------------------------------------------------------------- hooks/post-receive -- The official mkinitcpio repository

1 0