November 2011 - Arch-projects - lists.archlinux.org

[arch-projects] [initscripts] [PATCH] FS#26726 error message should say 'Daemon' instead of 'Dameon' Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl>
by Jelle van der Waa 05 Nov '11

05 Nov '11

--- rc.d | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/rc.d b/rc.d index 3f2835e..aed2e42 100755 --- a/rc.d +++ b/rc.d @@ -36,7 +36,7 @@ filter_daemons() { for daemon in "${daemons[@]}"; do # check if daemons is valid if ! have_daemon "$daemon"; then - printf "${C_FAIL}:: ${C_DONE}Dameon script ${C_FAIL}${daemon}${C_DONE} does \ + printf "${C_FAIL}:: ${C_DONE}Daemon script ${C_FAIL}${daemon}${C_DONE} does \ not exist or is not executable.${C_CLEAR}\n" >&2 exit 2 fi -- 1.7.7.2

4 3

[arch-projects] [initscripts] [GIT] Arch Linux initscripts repository branch master updated. 2011.10.2-11-gfb4e5f6
by tomegun＠archlinux.org 05 Nov '11

05 Nov '11

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Arch Linux initscripts repository". The branch, master has been updated via fb4e5f6662e32dacb8373274f6ed5592e79472e3 (commit) from 1abd8cfb7aeb867c3d7b39dcd620e151228f3a12 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- commit fb4e5f6662e32dacb8373274f6ed5592e79472e3 Author: Jelle van der Waa <jelle(a)vdwaa.nl> Date: Sat Nov 5 20:46:01 2011 +0100 Fix misspelt error message FS#26726 error message should say 'Daemon' instead of 'Dameon' [tomegun: fixed commit message] Signed-off-by: Jelle van der Waa <jelle(a)vdwaa.nl> ----------------------------------------------------------------------- Summary of changes: rc.d | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) hooks/post-receive -- Arch Linux initscripts repository

1 0

[arch-projects] [initscripts] [GIT] Arch Linux initscripts repository branch master updated. 2011.10.2-10-g1abd8cf
by tomegun＠archlinux.org 05 Nov '11

05 Nov '11

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Arch Linux initscripts repository". The branch, master has been updated via 1abd8cfb7aeb867c3d7b39dcd620e151228f3a12 (commit) via 8b54494acdb9ceda7b24cb4b7c4ca98a5c2b00a6 (commit) from 34714bf34e5928479e5ec4367e5e79902876dfa3 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- commit 1abd8cfb7aeb867c3d7b39dcd620e151228f3a12 Author: Tom Gundersen <teg(a)jklm.no> Date: Sun Nov 6 01:44:38 2011 +0800 locale.sh: fix LC_TELEPHONE/LC_MEASUREMENT Thanks to Fabio Scotoni. Signed-off-by: Tom Gundersen <teg(a)jklm.no> commit 8b54494acdb9ceda7b24cb4b7c4ca98a5c2b00a6 Author: Tom Gundersen <teg(a)jklm.no> Date: Sat Nov 5 13:56:58 2011 +0100 bootlog: filter out some more escapecodes In particular "^[[119G". Signed-off-by: Tom Gundersen <teg(a)jklm.no> ----------------------------------------------------------------------- Summary of changes: functions | 2 +- locale.sh | 6 ++++++ 2 files changed, 7 insertions(+), 1 deletions(-) hooks/post-receive -- Arch Linux initscripts repository

1 0

[arch-projects] FS#26726 error message should say 'Daemon' instead of 'Dameon'
by Jelle van der Waa 05 Nov '11

05 Nov '11

Just a typo fix, sorry for the misformed patch. Signed-off-by: Jelle van der Waa <jelle(a)vdwaa.nl> --- rc.d | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/rc.d b/rc.d index 3f2835e..aed2e42 100755 --- a/rc.d +++ b/rc.d @@ -36,7 +36,7 @@ filter_daemons() { for daemon in "${daemons[@]}"; do # check if daemons is valid if ! have_daemon "$daemon"; then - printf "${C_FAIL}:: ${C_DONE}Dameon script ${C_FAIL}${daemon}${C_DONE} does \ + printf "${C_FAIL}:: ${C_DONE}Daemon script ${C_FAIL}${daemon}${C_DONE} does \ not exist or is not executable.${C_CLEAR}\n" >&2 exit 2 fi -- 1.7.7.2

1 0

[arch-projects] [ABS] [PATCH 1/6] vcs prototypes: remove build directories after making package
by Linus Arver 05 Nov '11

05 Nov '11

For all vcs prototypes, we currently create a temporary build directory. However, we do not delete it after we are done creating the package. This wastes disk space. We already do a "rm -rf" on the build directories every time after we do a checkout anyway, so this patch doesn't really change anything. Signed-off-by: Linus Arver <linusarver(a)gmail.com> --- prototypes/PKGBUILD-bzr.proto | 2 ++ prototypes/PKGBUILD-cvs.proto | 2 ++ prototypes/PKGBUILD-darcs.proto | 2 ++ prototypes/PKGBUILD-git.proto | 2 ++ prototypes/PKGBUILD-hg.proto | 2 ++ prototypes/PKGBUILD-svn.proto | 2 ++ 6 files changed, 12 insertions(+), 0 deletions(-) diff --git a/prototypes/PKGBUILD-bzr.proto b/prototypes/PKGBUILD-bzr.proto index 81f145f..fca5f36 100644 --- a/prototypes/PKGBUILD-bzr.proto +++ b/prototypes/PKGBUILD-bzr.proto @@ -59,6 +59,8 @@ build() { package() { cd "$srcdir/$_bzrmod-build" make DESTDIR="$pkgdir/" install + + rm -rf "$srcdir/$_bzrmod-build" } # vim:set ts=2 sw=2 et: diff --git a/prototypes/PKGBUILD-cvs.proto b/prototypes/PKGBUILD-cvs.proto index 982c149..997373d 100644 --- a/prototypes/PKGBUILD-cvs.proto +++ b/prototypes/PKGBUILD-cvs.proto @@ -60,6 +60,8 @@ build() { package() { cd "$srcdir/$_cvsmod-build" make DESTDIR="$pkgdir/" install + + rm -rf "$srcdir/$_cvsmod-build" } # vim:set ts=2 sw=2 et: diff --git a/prototypes/PKGBUILD-darcs.proto b/prototypes/PKGBUILD-darcs.proto index 979e9b5..cbeef29 100644 --- a/prototypes/PKGBUILD-darcs.proto +++ b/prototypes/PKGBUILD-darcs.proto @@ -61,6 +61,8 @@ build() { package() { cd "$srcdir/$_darcsmod-build" make DESTDIR="$pkgdir/" install + + rm -rf "$srcdir/$_darcsmod-build" } # vim:set ts=2 sw=2 et: diff --git a/prototypes/PKGBUILD-git.proto b/prototypes/PKGBUILD-git.proto index 05b721b..7ece6f3 100644 --- a/prototypes/PKGBUILD-git.proto +++ b/prototypes/PKGBUILD-git.proto @@ -59,6 +59,8 @@ build() { package() { cd "$srcdir/$_gitname-build" make DESTDIR="$pkgdir/" install + + rm -rf "$srcdir/$_gitname-build" } # vim:set ts=2 sw=2 et: diff --git a/prototypes/PKGBUILD-hg.proto b/prototypes/PKGBUILD-hg.proto index 8474533..df9abd5 100644 --- a/prototypes/PKGBUILD-hg.proto +++ b/prototypes/PKGBUILD-hg.proto @@ -60,6 +60,8 @@ build() { package() { cd "$srcdir/$_hgrepo-build" make DESTDIR="$pkgdir/" install + + rm -rf "$srcdir/$_hgrepo-build" } # vim:set ts=2 sw=2 et: diff --git a/prototypes/PKGBUILD-svn.proto b/prototypes/PKGBUILD-svn.proto index a08e0e3..f103c78 100644 --- a/prototypes/PKGBUILD-svn.proto +++ b/prototypes/PKGBUILD-svn.proto @@ -58,6 +58,8 @@ build() { package() { cd "$srcdir/$_svnmod-build" make DESTDIR="$pkgdir/" install + + rm -rf "$srcdir/$_svnmod-build" } # vim:set ts=2 sw=2 et: -- 1.7.7.1

3 6

[arch-projects] [initscripts] [GIT] Arch Linux initscripts repository branch master updated. 2011.10.2-8-g34714bf
by tomegun＠archlinux.org 04 Nov '11

04 Nov '11

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Arch Linux initscripts repository". The branch, master has been updated via 34714bf34e5928479e5ec4367e5e79902876dfa3 (commit) via 3fd0222be7868096e9ed6d97ccee1b3c1ae4d394 (commit) from 00070eca730dec9c6d587cc1639f6abaca83fa34 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- commit 34714bf34e5928479e5ec4367e5e79902876dfa3 Author: Tom Gundersen <teg(a)jklm.no> Date: Sat Oct 29 17:26:26 2011 +0200 swapoff: umount swap-backed fs before switching off swap Factor out umounting. Explicitly skip umounting API directories, rather than matching on fs type. This allows us to e.g. unmount all tmpfs but leaving /run and /dev/shm alone. v3: fixed some regressions in v2, made 'API filesystems' less general v2: new umount_all implementation based on proposal by Dave and input from Anthony. Also, ignore ramfs as it is not backed by swap. Cc: Dave Reisner <d(a)falconindy.com> Cc: C Anthony Risinger <anthony(a)xtfx.me> Signed-off-by: Tom Gundersen <teg(a)jklm.no> commit 3fd0222be7868096e9ed6d97ccee1b3c1ae4d394 Author: Tom Gundersen <teg(a)jklm.no> Date: Sat Oct 29 12:58:30 2011 +0200 rc.shutdown: reorder a bit The new ordering is now: 1) book-keeping 2) shutting down and killing processes 3) swapoff 4) unmounting and tearing down of block devices The reason to move 1) to the top is so it will not interfere with the killing of processes. The reason for not moving 3) to the top as well is that we want to minimize the amount of stuff that has to be moved from swap to ram. However, swapoff must happen before 4) as we don't know what is under the swap device/file. Added a TODO: unmount any devices backed by swap (tmpfs/ramfs) to make sure that their contents is thrown away rather than moved to ram. In principle we might get OOM on shutdown due to the current situation, but in most cases the only problem should be that shutdown is unecessarily slow. Thanks to Dan and Dave for prompting me to look into this. Cc: Dan McGee <dpmcgee(a)gmail.com> Cc: Dave Reisner <d(a)falconindy.com> Signed-off-by: Tom Gundersen <teg(a)jklm.no> ----------------------------------------------------------------------- Summary of changes: functions | 30 ++++++++++++++++++++++++++++++ rc.shutdown | 39 ++++++++++++++++++++++----------------- 2 files changed, 52 insertions(+), 17 deletions(-) hooks/post-receive -- Arch Linux initscripts repository

1 0

[arch-projects] [devtools][PATCH] commitpkg: Make svn quieter
by Eric Bélanger 04 Nov '11

04 Nov '11

Signed-off-by: Eric Bélanger <snowmaniscool(a)gmail.com> --- commitpkg.in | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) diff --git a/commitpkg.in b/commitpkg.in index 2dc9f19..ba98aaa 100644 --- a/commitpkg.in +++ b/commitpkg.in @@ -172,8 +172,8 @@ if [ "${arch[*]}" == 'any' ]; then if [ -d ../repos/$repo-i686 -a -d ../repos/$repo-x86_64 ]; then pushd ../repos/ >/dev/null stat_busy "Removing $repo-i686 and $repo-x86_64" - svn rm $repo-i686 - svn rm $repo-x86_64 + svn rm -q $repo-i686 + svn rm -q $repo-x86_64 svn commit -q -m "Removed $repo-i686 and $repo-x86_64 for $pkgname" stat_done popd >/dev/null @@ -182,7 +182,7 @@ else if [ -d ../repos/$repo-any ]; then pushd ../repos/ >/dev/null stat_busy "Removing $repo-any" - svn rm $repo-any + svn rm -q $repo-any svn commit -q -m "Removed $repo-any for $pkgname" stat_done popd >/dev/null -- 1.7.7.2

1 0

Re: [arch-projects] [ABS] [PATCH v2 5/7] vcs prototypes: more efficient temp build directories
by Linus Arver 04 Nov '11

04 Nov '11

On Thu, Nov 03, 2011 at 07:51:44AM -0500, Jesse Young wrote: > On Wed, 2 Nov 2011 20:14:30 -0700 > Linus Arver <linusarver(a)gmail.com> wrote: > > > The bzr, darcs, git, and hg version control systems use a single > > internal folder at the root to store all VCS-related data (commits, > > history, etc.). This folder can get quite large (hundreds of MiB) for > > big projects and continues to grow as the project lives on. > > > > We exclude this folder when creating a temporary build directory to > > save time and space. Since commit > > 0e79802c0ac8453376d8c0f99629f5a3b499f571 in pacman includes "shopt -s > > extglob" in pacman/scripts/makepkg.sh.in, we can use the simple > > "!(foo)" syntax. > > > > CVS and SVN pollute the source repo with "CVS" and ".svn" directories > > recursively for every single directory, so there is no simple > > one-liner solution to exclude the VCS data for these systems that I > > am aware of. > > Not as nice as not copying the files in the first place, but you > could do > $ find "$_svnmod-build" -type d -name .svn -exec rm -rf {} \; > For these recursive structures > Thanks, I'll incorporate your one-liner solution in this patch to make it more comprehensive. > Another option, and I'm only familiar with how git does it, is to > $ scm export | tar -xvf - > or similar to only copy the latest commit to the build directory. > I've done some googling and it looks like you meant to say $ git archive master | tar -x -C /somewhere/else (http://stackoverflow.com/questions/160608/how-to-do-a-git-export-like-svn-e…) I still think the solution using plain `cp' is better because it's far simpler and results in an identical file structure (the root .git/ is excluded, but .gitignore files are still there). Plus you don't need to supply the branch/commit/tree name. > All this being said, why do we need a separate build directory? It > should be easy to do a "distclean" with most SCMs (eg. git clean) to > get a pristine working directory. > > Jesse Well one reason off the top of my head is if you need to apply a local patch (e.g., projects like lilypond still use python2 but just have `python' in their scripts, so you need to do a fairly invasive change). Once you do that, your working tree is dirty and you won't be able to pull from upstream without doing a "git reset --hard". (git-clean removes untracked files, which will prevent repackaging (e.g., your compiled binary will be deleted)). But I guess it depends. If you're just pulling in vanilla upstream, then a temp build directory makes no sense. As far as git is concerned, since the compiled binaries/docs/etc will not be tracked, it will happily pull in the later commits even if your directory has lots of stray files. So no problem there. I guess there should be 2 versions to choose from in the PKGBUILD --- one with and one without a temp build directory. I'll make it so that both are commented out, and leave the PKGBUILD author to shape it to their needs. Since this patch series is getting a bit tedious, I'll just do the git prototype for now (I'm not knowledgeable enough in the other VCSs anyway...). -Linus

1 0

[arch-projects] [devtools] [PATCH] commitpkg: Fix commit message
by Lukas Fleischer 03 Nov '11

03 Nov '11

Move the message template before the if block. We moved this to the else branch in commit aaa68e49e8e5a68950a63b9aa4a8c1f6aed2e2d2 which lead to "msgtemplate" being unset if one specifies a commit message on the command line, thus stripping the "upgpkg:" part. Signed-off-by: Lukas Fleischer <archlinux(a)cryptocrack.de> --- commitpkg.in | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/commitpkg.in b/commitpkg.in index d7f7513..b83b6ce 100644 --- a/commitpkg.in +++ b/commitpkg.in @@ -90,12 +90,12 @@ done shift $(( OPTIND - 1 )) if [ -n "$(svn status -q)" ]; then + msgtemplate="upgpkg: $pkgbase $(get_full_version)"$'\n\n' if [ -n "$1" ]; then stat_busy 'committing changes to trunk' svn commit -q -m "${msgtemplate}${1}" || die stat_done else - msgtemplate="upgpkg: $pkgbase $(get_full_version)"$'\n\n' msgfile="$(mktemp)" echo "$msgtemplate" > "$msgfile" if [ -n "$SVN_EDITOR" ]; then -- 1.7.7.2

1 0

[arch-projects] [ABS] [PATCH v2 7/7] git prototype: fix typo
by Linus Arver 03 Nov '11

03 Nov '11

Signed-off-by: Linus Arver <linusarver(a)gmail.com> --- prototypes/PKGBUILD-git.proto | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/prototypes/PKGBUILD-git.proto b/prototypes/PKGBUILD-git.proto index be6ebbb..08d265b 100644 --- a/prototypes/PKGBUILD-git.proto +++ b/prototypes/PKGBUILD-git.proto @@ -28,7 +28,7 @@ noextract=() md5sums=() #generate with 'makepkg -g' _gitroot=GITURL -_gitname=MODENAME +_gitname=REPONAME build() { cd "$srcdir" -- 1.7.7.2

1 0