* checks for variable existance should not use -n or quotes
* avoid using -eq, this is what arithmetic expansion is for
* always quote the LHS of a [[
* always quote proper arrays expanded with @
Signed-off-by: Dave Reisner
---
network | 40 ++++++++++++++++++++--------------------
rc.shutdown | 6 +++---
rc.single | 2 +-
rc.sysinit | 18 +++++++++---------
4 files changed, 33 insertions(+), 33 deletions(-)
diff --git a/network b/network
index 5a261b4..27df68a 100755
--- a/network
+++ b/network
@@ -69,7 +69,7 @@ ifdown() {
}
iflist() {
- for ifline in ${INTERFACES[@]}; do
+ for ifline in "${INTERFACES[@]}"; do
if [[ $ifline = ${ifline#!} ]]; then
printf " $ifline:\t"
else
@@ -110,8 +110,8 @@ rtdown() {
}
rtlist() {
- for rtline in ${ROUTES[@]}; do
- if [[ $rtline = ${rtline#!} ]]; then
+ for rtline in "${ROUTES[@]}"; do
+ if [[ "$rtline" = ${rtline#!} ]]; then
printf " $rtline:\t"
else
printf "$rtline:\t"
@@ -121,8 +121,8 @@ rtlist() {
}
bond_up() {
- for ifline in ${BOND_INTERFACES[@]}; do
- if [[ $ifline = ${ifline#!} ]]; then
+ for ifline in "${BOND_INTERFACES[@]}"; do
+ if [[ "$ifline" = ${ifline#!} ]]; then
bondcfg="bond_$ifline"
if [[ ${!bondcfg} ]]; then
/sbin/ifenslave $ifline ${!bondcfg} || error=1
@@ -132,8 +132,8 @@ bond_up() {
}
bond_down() {
- for ifline in ${BOND_INTERFACES[@]}; do
- if [[ $ifline = ${ifline#!} ]]; then
+ for ifline in "${BOND_INTERFACES[@]}"; do
+ if [[ "$ifline" = ${ifline#!} ]]; then
bondcfg="bond_$ifline"
/sbin/ifenslave -d $ifline ${!bondcfg} || error=1
fi
@@ -141,8 +141,8 @@ bond_down() {
}
bridge_up() {
- for br in ${BRIDGE_INTERFACES[@]}; do
- if [[ $br = ${br#!} ]]; then
+ for br in "${BRIDGE_INTERFACES[@]}"; do
+ if [[ "$br" = ${br#!} ]]; then
# if the bridge already exists, remove it
if [[ $(/sbin/ifconfig $br 2>/dev/null) ]]; then
/sbin/ifconfig $br down
@@ -151,9 +151,9 @@ bridge_up() {
/usr/sbin/brctl addbr $br
brifs="bridge_$br"
for brif in ${!brifs}; do
- if [[ $brif = ${brif#!} ]]; then
+ if [[ "$brif" = ${brif#!} ]]; then
for ifline in ${BOND_INTERFACES[@]}; do
- if [[ $brif = $ifline && $ifline = ${ifline#!} ]]; then
+ if [[ "$brif" = $ifline && "$ifline" = ${ifline#!} ]]; then
ifup $ifline
bondcfg="bond_$ifline"
/sbin/ifenslave $ifline ${!bondcfg} || error=1
@@ -169,8 +169,8 @@ bridge_up() {
}
bridge_down() {
- for br in ${BRIDGE_INTERFACES[@]}; do
- if [[ $br = ${br#!} ]]; then
+ for br in "${BRIDGE_INTERFACES[@]}"; do
+ if [[ "$br" = ${br#!} ]]; then
/usr/sbin/brctl delbr $br
fi
done
@@ -189,8 +189,8 @@ case "$1" in
# bring up bridge interfaces
bridge_up
# bring up ethernet interfaces
- for ifline in ${INTERFACES[@]}; do
- if [[ $ifline = ${ifline#!} ]]; then
+ for ifline in "${INTERFACES[@]}"; do
+ if [[ "$ifline" = ${ifline#!} ]]; then
ifup $ifline || error=1
fi
done
@@ -198,7 +198,7 @@ case "$1" in
bond_up
# bring up routes
for rtline in "${ROUTES[@]}"; do
- if [ "$rtline" = "${rtline#!}" ]; then
+ if [[ "$rtline" = ${rtline#!} ]]; then
rtup $rtline || error=1
fi
done
@@ -215,7 +215,7 @@ case "$1" in
# exit
#fi
- if [[ $NETWORK_PERSIST =~ yes|YES && $RUNLEVEL == [06] ]]; then
+ if [[ "$NETWORK_PERSIST" =~ yes|YES && "$RUNLEVEL" = [06] ]]; then
status "Skipping Network Shutdown" true
exit 0
fi
@@ -224,20 +224,20 @@ case "$1" in
rm_daemon network
error=0
for rtline in "${ROUTES[@]}"; do
- if [[ $rtline = ${rtline#!} ]]; then
+ if [[ "$rtline" = ${rtline#!} ]]; then
rtdown $rtline || error=1
fi
done
# bring down bond interfaces
bond_down
for ifline in ${INTERFACES[@]}; do
- if [[ $ifline = ${ifline#!} ]]; then
+ if [[ "$ifline" = ${ifline#!} ]]; then
ifdown $ifline || error=1
fi
done
# bring down bridge interfaces
bridge_down
- if ((error == 0)); then
+ if (( error == 0 )); then
stat_done
else
stat_fail
diff --git a/rc.shutdown b/rc.shutdown
index 499459f..9a04014 100755
--- a/rc.shutdown
+++ b/rc.shutdown
@@ -61,7 +61,7 @@ stat_busy "Deactivating Swap"
stat_done
# stop monitoring of lvm2 groups before unmounting filesystems
-if [[ $USELVM =~ yes|YES && -x /sbin/lvm && -d /sys/block ]]; then
+if [[ "$USELVM" =~ yes|YES && -x /sbin/lvm && -d /sys/block ]]; then
stat_busy "Deactivating monitoring of LVM2 groups"
/sbin/vgchange --monitor n >/dev/null 2>&1
stat_done
@@ -86,7 +86,7 @@ if [[ -f /etc/crypttab && -n $CS ]] && /bin/grep -q ^[^#] /etc/crypttab; then
stat_done
fi
-if [[ $USELVM =~ yes|YES && -x /sbin/lvm && -d /sys/block ]]; then
+if [[ "$USELVM" =~ yes|YES && -x /sbin/lvm && -d /sys/block ]]; then
stat_busy "Deactivating LVM2 groups"
/sbin/vgchange --sysinit -a n >/dev/null 2>&1
stat_done
@@ -100,7 +100,7 @@ run_hook shutdown_poweroff
# Power off or reboot
printsep
-if [[ $RUNLEVEL = 0 ]]; then
+if (( RUNLEVEL == 0 )); then
printhl "${C_H2}POWER OFF"
/sbin/poweroff -d -f -h -i
else
diff --git a/rc.single b/rc.single
index aab2b58..de50a47 100755
--- a/rc.single
+++ b/rc.single
@@ -46,7 +46,7 @@ fi
run_hook single_end
-if [[ $RUNLEVEL = 1 ]]; then
+if (( RUNLEVEL == 1 )); then
printsep
printhl "Entering single-user mode..."
# make sure /dev/initctl is in place
diff --git a/rc.sysinit b/rc.sysinit
index 3d0eb02..b08d927 100755
--- a/rc.sysinit
+++ b/rc.sysinit
@@ -33,7 +33,7 @@ fi
# anything more serious than KERN_WARNING goes to the console
# 'verbose' cmdline parameter enables more messages
-if [[ -n "$verbose" ]]; then
+if [[ $verbose ]]; then
/bin/dmesg -n 8
else
/bin/dmesg -n 3
@@ -162,11 +162,11 @@ if [[ -f /etc/crypttab && -n $CS ]] && /bin/grep -q ^[^#] /etc/crypttab; then
# This sanity check _should_ be sufficient, but it might not.
# This may cause dataloss if it is not used carefully.
/sbin/blkid -p "$2" &>/dev/null
- if [[ $? -eq 2 ]]; then
+ if (( $? == 2 )); then
_overwriteokay=1
fi
fi
- if [[ $_overwriteokay -eq 0 ]]; then
+ if (( _overwriteokay == 0 )); then
false
elif $CS -d /dev/urandom $4 $open "$a" "$b" >/dev/null; then
stat_append "creating swapspace.."
@@ -204,7 +204,7 @@ if [[ -f /etc/crypttab && -n $CS ]] && /bin/grep -q ^[^#] /etc/crypttab; then
*)
echo "$3" | $CS $4 $open "$a" "$b" >/dev/null;;
esac
- if (($? != 0)); then
+ if (( $? != 0 )); then
failed=1
stat_append "failed "
else
@@ -218,7 +218,7 @@ if [[ -f /etc/crypttab && -n $CS ]] && /bin/grep -q ^[^#] /etc/crypttab; then
else
stat_fail
fi
- if [[ ${crypto_unlocked} -eq 1 ]]; then
+ if (( crypto_unlocked == 1 )); then
# Maybe someone has LVM on an encrypted block device
activate_vgs
fi
@@ -246,11 +246,11 @@ if [[ -x /sbin/fsck ]]; then
run_hook sysinit_prefsck
/sbin/fsck -A -T -C$FSCK_FD -a -t "$NETFS,noopts=_netdev" $FORCEFSCK >$FSCK_OUT 2>$FSCK_ERR
fsckret=$?
- if ((fsckret > 1)); then
+ if (( fsckret > 1 )); then
stat_fail
fi
run_hook sysinit_postfsck
- if (( ( fsckret & 2) == 2)); then
+ if (( (fsckret & 2) == 2 )); then
echo
echo "********************** REBOOT REQUIRED *********************"
echo "* *"
@@ -260,7 +260,7 @@ if [[ -x /sbin/fsck ]]; then
echo
/bin/sleep 15
fsck_reboot
- elif ((fsckret > 1 && fsckret != 32)); then
+ elif (( fsckret > 1 && fsckret != 32 )); then
echo
echo "***************** FILESYSTEM CHECK FAILED ****************"
echo "* *"
@@ -280,7 +280,7 @@ fi
stat_busy "Mounting Local Filesystems"
/bin/mount -n -o remount,rw /
-if [ -x /bin/findmnt -a -e /proc/self/mountinfo ]; then
+if [[ -x /bin/findmnt && -e /proc/self/mountinfo ]]; then
/bin/findmnt -rnu -o SOURCE,TARGET,FSTYPE,OPTIONS >| /etc/mtab
else
cat /proc/mounts >| /etc/mtab
--
1.7.4.1