On Thu, Jun 21, 2012 at 12:35 AM, <jstjohn@purdue.edu> wrote:
From: "Jason St. John" <jstjohn@purdue.edu>
This commit improves/corrects the spelling and grammar in script comments, messages that get printed to the terminal (stat_busy, etc.), and in two man pages.
Some of the notable changes are listed below: -- 'UDev' -> 'udev' -- 'filesystems' -> 'file systems' -- 'BTRFS' -> 'Btrfs'
I guess 'btrfs' is the correct capitalization.
-- 'api' -> 'API' -- 'timezone' -> 'time zone' -- 'http://' -> 'https://' (in the archlinux.org URL) -- 'bash' -> 'Bash' (although obviously not in the shebang)
Hm, 'bash' is ok I think. I base this (as well as the btrfs comment) on how it is capitalized in the manpage.
-- 'startup' -> 'start-up' -- changed messages printed to the terminal to use sentence case exclusively
If you address the issues pointed out by Dave as well, squash the two patches and rebase, I'd be happy to take this. Cheers, Tom
PKGBUILD | 3 +-- bash-completion | 2 +- functions | 46 +++++++++++++++++++++++----------------------- netfs | 6 +++--- network | 8 ++++---- rc.conf.5.txt | 44 ++++++++++++++++++++++---------------------- rc.d.8.txt | 6 +++--- rc.local | 2 +- rc.shutdown | 26 +++++++++++++------------- rc.single | 4 ++-- rc.sysinit | 50 +++++++++++++++++++++++++------------------------- 11 files changed, 98 insertions(+), 99 deletions(-)
diff --git a/PKGBUILD b/PKGBUILD index 0c63e59..7a45797 100644 --- a/PKGBUILD +++ b/PKGBUILD @@ -3,7 +3,7 @@ pkgver=$(date +%Y%m%d) pkgrel=$(git log -1 --pretty=format:%h) pkgdesc="System initialization/bootup scripts" arch=('any') -url="http://www.archlinux.org" +url="https://www.archlinux.org" license=('GPL') groups=('base') conflicts=('initscripts') @@ -16,7 +16,6 @@ optdepends=('net-tools: legacy networking support' 'bridge-utils: Network bridging support' 'dhcpcd: DHCP network configuration' 'wireless_tools: Wireless networking') -makedepends=(asciidoc) source=() sha256sums=()
diff --git a/bash-completion b/bash-completion index 4b4593b..333e339 100644 --- a/bash-completion +++ b/bash-completion @@ -1,4 +1,4 @@ -# rc.d bash completion by Seblu <seblu@seblu.net> +# rc.d Bash completion by Seblu <seblu@seblu.net>
_rc_d() { diff --git a/functions b/functions index 4a8ba7b..daf8d83 100644 --- a/functions +++ b/functions @@ -2,7 +2,7 @@ # initscripts functions #
-# sanitize PATH (will be overridden later when /etc/profile is sourced, but is useful for UDev) +# sanitize PATH (will be overridden later when /etc/profile is sourced but is useful for udev) export PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
localevars=(LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY @@ -13,7 +13,7 @@ vconsolevars=(KEYMAP KEYMAP_TOGGLE FONT FONT_MAP FONT_UNIMAP)
if [[ $1 == "start" ]]; then if [[ $STARTING ]]; then - echo "A daemon is starting another daemon, this is unlikely to work as intended." + echo "A daemon is starting another daemon; this is unlikely to work as intended." else export STARTING=1 fi @@ -334,13 +334,13 @@ kill_all_wait() { }
kill_all() { - stat_busy "Sending SIGTERM To Processes" + stat_busy "Sending SIGTERM to processes" kill_all_wait 15 40 if (( $? == 0 )); then stat_done else stat_fail - status "Sending SIGKILL To Processes" kill_all_wait 9 60 + status "Sending SIGKILL to processes" kill_all_wait 9 60 fi }
@@ -358,23 +358,23 @@ load_modules() { return $rc }
-# Start/trigger UDev, load MODULES and settle UDev +# Start/trigger udev, load MODULES and settle udev udevd_modprobe() { # $1 = where we are being called from. # This is used to determine which hooks to run. - status "Starting UDev Daemon" /usr/lib/systemd/systemd-udevd --daemon + status "Starting udev daemon" /usr/lib/systemd/systemd-udevd --daemon
run_hook "$1_udevlaunched"
- stat_busy "Triggering UDev uevents" + stat_busy "Triggering udev uevents" udevadm trigger --action=add --type=subsystems udevadm trigger --action=add --type=devices stat_done
# Load modules from the MODULES array and modules-load.d - status -v "Loading User-specified Modules" load_modules + status -v "Loading user-specified modules" load_modules
- status "Waiting for UDev uevents to be processed" \ + status "Waiting for udev uevents to be processed" \ udevadm settle
run_hook "$1_udevsettled" @@ -484,13 +484,13 @@ read_crypttab() { return $failed }
-set_timezone() { +set_time_zone() { local tz=$1 zonefile=/usr/share/zoneinfo/$1
[[ $tz ]] || return 1
if [[ ! -e $zonefile ]]; then - printf "error: \`%s' is not a valid timezone\n" "$tz" + printf "error: \`%s' is not a valid time zone\n" "$tz" return 1 fi
@@ -501,11 +501,11 @@ set_timezone() { fi }
-# Filesystem functions +# File system functions # These can be overridden/reused for customizations like shutdown/loop-fsck. NETFS="nfs,nfs4,smbfs,cifs,codafs,ncpfs,shfs,fuse,fuseblk,glusterfs,davfs,fuse.glusterfs"
-# Check local filesystems +# Check local file systems fsck_all() { if [[ -f /forcefsck ]] || in_array forcefsck $(< /proc/cmdline); then FORCEFSCK="-f" @@ -534,12 +534,12 @@ fsck_reboot() { sleep 15 else echo - echo "***************** FILESYSTEM CHECK FAILED ****************" + echo "**************** FILE SYSTEM CHECK FAILED ****************" echo "* *" echo "* Please repair manually and reboot. Note that the root *" echo "* file system is currently mounted read-only. To remount *" - echo "* it read-write type: mount -o remount,rw / *" - echo "* When you exit the maintenance shell the system will *" + echo "* it read-write, type: mount -o remount,rw / *" + echo "* When you exit the maintenance shell, the system will *" echo "* reboot automatically. *" echo "* *" echo "************************************************************" @@ -562,12 +562,12 @@ umount_all() {
findmnt -mrunRo TARGET,FSTYPE,OPTIONS / | { while read -r target fstype options; do - # match only targetted fstypes + # match only targeted fstypes if [[ $1 && $1 != "$fstype" ]]; then continue fi
- # don't unmount API filesystems + # do not unmount API file systems if [[ $target = /@(proc|sys|run|dev|dev/pts) ]]; then continue fi @@ -589,7 +589,7 @@ umount_all() { }
remove_leftover() { - status -v 'Removing Leftover Files' systemd-tmpfiles --create --remove + status -v 'Removing leftover files' systemd-tmpfiles --create --remove }
bootlogd_stop() { @@ -626,14 +626,14 @@ bootlogd_stop() { # single_udevlaunched: after udev has been launched in rc.single # sysinit_udevsettled: after uevents have settled in rc.sysinit # single_udevsettled: after uevents have settled in rc.single -# sysinit_premount: before local filesystems are mounted, but after root is mounted read-write in rc.sysinit -# sysinit_postmount: after local filesystems are mounted +# sysinit_premount: before local file systems are mounted, but after root is mounted read-write in rc.sysinit +# sysinit_postmount: after local file systems are mounted # shutdown_prekillall: before all processes are being killed in rc.shutdown # single_prekillall: before all processes are being killed in rc.single # shutdown_postkillall: after all processes have been killed in rc.shutdown # single_postkillall: after all processes have been killed in rc.single -# shutdown_preumount: after last filesystem write, but before filesystems are unmounted -# shutdown_postumount: after filesystems are unmounted +# shutdown_preumount: after last file system write, but before file systems are unmounted +# shutdown_postumount: after file systems are unmounted # shutdown_poweroff: directly before powering off in rc.shutdown # # Declare add_hook and run_hook as read-only to prevent overwriting them. diff --git a/netfs b/netfs index bd459ef..a3b9ab9 100755 --- a/netfs +++ b/netfs @@ -1,12 +1,12 @@ #!/bin/bash
-# sourcing our current rc.conf requires this to be a bash script +# sourcing our current rc.conf requires this to be a Bash script . /etc/rc.conf . /etc/rc.d/functions
case "$1" in start) - stat_busy "Mounting Network Filesystems" + stat_busy "Mounting network file systems" mount -a -t "$NETFS" rc=$? mount -a -O _netdev @@ -15,7 +15,7 @@ case "$1" in stat_done ;; stop) - stat_busy "Unmounting Network Filesystems" + stat_busy "Unmounting network file systems" umount -a -f -O _netdev rc=$? umount -a -f -t "$NETFS" diff --git a/network b/network index 322082c..5fe19e2 100755 --- a/network +++ b/network @@ -235,10 +235,10 @@ case "$1" in # deprecation check need_legacy && deprecated if ! ck_daemon network; then - echo "Network is already running. Try 'network restart'" + echo "Network is already running. Try 'network restart'" exit fi - stat_busy "Starting Network" + stat_busy "Starting network" error=0 if need_legacy; then # bring up bridge interfaces @@ -271,11 +271,11 @@ case "$1" in # deprecation check need_legacy && deprecated if [[ $NETWORK_PERSIST =~ yes|YES && $RUNLEVEL == [06] ]]; then - status "Skipping Network Shutdown" true + status "Skipping network shutdown" true exit 0 fi
- stat_busy "Stopping Network" + stat_busy "Stopping network" rm_daemon network error=0 if need_legacy; then diff --git a/rc.conf.5.txt b/rc.conf.5.txt index 726ba23..bfde2e3 100644 --- a/rc.conf.5.txt +++ b/rc.conf.5.txt @@ -15,22 +15,22 @@ SYNOPSIS DESCRIPTION ----------- The /etc/rc.conf file is the system configuration file for Arch-specific -settings. The format is bash. It contains several commonly-edited settings such -as timezone; keymap; kernel modules; daemons to load at start-up; etc. It is +settings. The format is Bash. It contains several commonly edited settings such +as time zone, keymap, kernel modules, daemons to load at start-up, etc. It is split up in a few sections to categorize configuration settings: localization, -hardware, networking and daemons. +hardware, networking, and daemons.
LOCALIZATION[[L]] ----------------- *TIMEZONE=*
-Specifies the timezone. The setting takes effect on boot by ensuring that /etc/localtime is a symlink -to the correct zoneinfo file. Possible timezones are the relative path to a zoneinfo file starting -from the directory /usr/share/zoneinfo. For example, a German timezone would be Europe/Berlin, +Specifies the time zone. The setting takes effect on boot by ensuring that /etc/localtime is a symlink +to the correct zoneinfo file. Possible time zones are the relative path to a zoneinfo file starting +from the directory /usr/share/zoneinfo. For example, a German time zone would be Europe/Berlin, which refers to the file /usr/share/zoneinfo/Europe/Berlin.
-Note: if empty, /etc/localtime is not changed. This is useful if /etc/localtime is maintained manually -or by a third-party tool; or if there is no reason to change it from what was set during install. +Note: If empty, /etc/localtime is not changed. This is useful if /etc/localtime is maintained manually +or by a third-party tool, or if there is no reason to change it from what was set during install.
Default: empty
@@ -43,9 +43,9 @@ Options: - empty: fall back to the value in /var/lib/hwclock/adjtime, which defaults to UTC. This is recommended as other users of hwclock might change the adjtime file and hence cause rc.conf and adjtime to be out of sync. - "UTC": most robust, allows operating systems to abstract local time and ease DST. - - "localtime": apply timezone (and DST) in hardwareclock: discouraged. - Choose this if you dualboot with an OS which cannot handle UTC BIOS times correctly, like Windows (note - that recent Windows'es can use UTC, which is preferable). + - "localtime": apply time zone (and DST) in hardwareclock: discouraged. + Choose this if you dual-boot with an OS which cannot handle UTC BIOS times correctly, like Windows (note + that recent Windows releases can use UTC, which is preferable). - any other value will result in the hardware clock being left untouched (useful for virtualization)
Default: empty @@ -87,14 +87,14 @@ Default: empty
*DAEMON_LOCALE=*
- - If set to 'yes', use $LOCALE as the locale during daemon startup and during the boot process. + - If set to 'yes', use $LOCALE as the locale during daemon start-up and during the boot process. - If set to 'no', the C locale is used.
Default: "yes"
*USECOLOR=*
-Use ANSI color sequences in startup messages +Use ANSI color sequences in start-up messages
Default: "yes"
@@ -109,19 +109,19 @@ Default: ().
*USEDMRAID=*
-Scan for FakeRAID (dmraid) Volumes at startup. +Scan for FakeRAID (dmraid) volumes at start-up.
Default: "no"
*USEBTRFS=*
-Scan for BTRFS volumes at startup. +Scan for Btrfs volumes at start-up.
Default: "no"
*USELVM=*
-Scan for LVM volume groups at startup, required if you use LVM. +Scan for LVM volume groups at start-up. This is required if you use LVM.
Default: "no"
@@ -138,7 +138,7 @@ The following settings help you setting up a wired network.
*interface=*
-Name of device. Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces. +Name of device. Use `ip addr` or `ls /sys/class/net/` to see all available interfaces.
Default: empty
@@ -191,7 +191,7 @@ Required for manual configuration, ignored for DHCP. netmask= gateway=
-The following options might be needed for advanced use-cases. +The following options might be needed for advanced use cases.
*NETWORK_PERSIST=*
@@ -201,7 +201,7 @@ Default: "no"
*NETWORKS=*
-This functionality is deprecated, please refer to the 'netcfg' documentation. +This functionality is deprecated; please refer to 'man 8 netcfg'.
DAEMONS[[D]] ------------ @@ -212,10 +212,10 @@ Daemons to start at boot-up (in this order) - prefix a daemon with a @ to start it up in the background
If you are sure nothing else touches your hardware clock (such as ntpd or -a dual-boot), you might want to enable 'hwclock'. Note that this will only +dual-booting), you might want to enable 'hwclock'. Note that this will only make a difference if the hwclock program has been calibrated correctly.
-If you use a network filesystem you should enable 'netfs'. +If you use a network file system, you should enable 'netfs'.
Default: (syslog-ng network crond)
@@ -226,4 +226,4 @@ hostname(5), vconsole.conf(5), locale.conf(5), hwclock(8)
AUTHORS ------- -Written by Dieter Plaetinck, Tom Gundersen and others. +Written by Dieter Plaetinck, Tom Gundersen, and others. diff --git a/rc.d.8.txt b/rc.d.8.txt index d0bbcce..c648e29 100644 --- a/rc.d.8.txt +++ b/rc.d.8.txt @@ -25,7 +25,7 @@ The actions supported by a rc scripts may be different from script to script, bu commonly supported actions include:
*start*:: - Starts the script if it's not already running. + Starts the script if it is not already running.
*stop*:: Stops a running script. @@ -73,13 +73,13 @@ Examples[[E]] Starts *sshd* and *gpm* scripts.
*rc.d start --auto --stopped*:: - Starts all stopped scripts which are started at startup. + Starts all stopped scripts which are started at start-up.
*rc.d stop crond*:: Stops the *crond* script.
*rc.d stop --noauto*:: - Stop all script which are not runned at startup + Stops all scripts which are not started at start-up
*rc.d restart crond*:: Restarts the *crond* script. diff --git a/rc.local b/rc.local index 4950cba..21254f1 100755 --- a/rc.local +++ b/rc.local @@ -1,6 +1,6 @@ #!/bin/bash # -# /etc/rc.local: Local multi-user startup script. +# /etc/rc.local: Local multi-user start-up script. #
diff --git a/rc.shutdown b/rc.shutdown index c708b92..36ce5bd 100755 --- a/rc.shutdown +++ b/rc.shutdown @@ -10,7 +10,7 @@ stty onlcr
echo " " -printhl "Initiating Shutdown..." +printhl "Initiating shutdown..." echo " "
run_hook shutdown_start @@ -19,19 +19,19 @@ run_hook shutdown_start
stop_all_daemons
-status 'Saving Random Seed' /usr/lib/systemd/systemd-random-seed save +status 'Saving random seed' /usr/lib/systemd/systemd-random-seed save
-[[ $TIMEZONE ]] && status "Configuring Time Zone" set_timezone "$TIMEZONE" +[[ $TIMEZONE ]] && status "Configuring time zone" set_time_zone "$TIMEZONE"
# Write to wtmp file before unmounting halt -w
-# stop monitoring of lvm2 groups before unmounting filesystems +# stop monitoring of LVM2 groups before unmounting file systems [[ $USELVM = [Yy][Ee][Ss] && -x $(type -P lvm) ]] && status "Deactivating monitoring of LVM2 groups" vgchange --monitor n
# any future uevents can and should be ignored -status "Shutting down UDev" udevadm control --exit +status "Shutting down udev" udevadm control --exit
run_hook shutdown_prekillall
@@ -41,15 +41,15 @@ run_hook shutdown_postkillall
run_hook shutdown_preumount
-# unmount any non-api partitions that are backed by swap, we don't want to +# Unmount any non-API partitions that are backed by swap; we don't want to # move their contents into memory (waste of time and might caues OOM). -status "Unmounting Swap-backed Filesystems" umount_all "tmpfs" +status "Unmounting swap-backed file systems" umount_all "tmpfs"
# almost everything is dead now, so the swap should hopefully be relatively # empty, and quick to switch off -status "Deactivating Swap" swapoff -a +status "Deactivating swap" swapoff -a
-status "Unmounting Non-API Filesystems" umount_all +status "Unmounting non-API file systems" umount_all
run_hook shutdown_postumount
@@ -90,14 +90,14 @@ if [[ -x /run/initramfs/shutdown ]]; then fi fi
- # make /run/initrafs a mount + # make /run/initramfs a mount mount --bind /run/initramfs /run/initramfs
# in case someone has shared our mountpoints, unshare them mount --make-private /run/initramfs mount --make-private /
- # bind all api mounts + # bind all API mounts mkdir -p /run/initramfs/{sys,proc,dev,run,oldroot} mount --bind /sys /run/initramfs/sys mount --bind /proc /run/initramfs/proc @@ -108,7 +108,7 @@ if [[ -x /run/initramfs/shutdown ]]; then cd /run/initramfs pivot_root . oldroot
- #reexec init + # reexec init /oldroot/sbin/init u
# run /shutdown in the new root @@ -116,7 +116,7 @@ if [[ -x /run/initramfs/shutdown ]]; then
else
- status "Remounting Root Filesystem Read-only" \ + status "Remounting root file system read-only" \ mount -o remount,ro /
# Power off or reboot diff --git a/rc.single b/rc.single index aec026c..32bbcd8 100755 --- a/rc.single +++ b/rc.single @@ -1,6 +1,6 @@ #!/bin/bash # -# /etc/rc.single: Single-user startup script. +# /etc/rc.single: Single-user start-up script. #
. /etc/rc.conf @@ -18,7 +18,7 @@ if [[ $PREVLEVEL != N ]]; then
run_hook single_postkillall
- # Start/trigger UDev, load MODULES and settle UDev + # Start/trigger udev, load MODULES and settle udev udevd_modprobe single
# Removing leftover files diff --git a/rc.sysinit b/rc.sysinit index 71eea91..8a4605c 100755 --- a/rc.sysinit +++ b/rc.sysinit @@ -8,10 +8,10 @@
echo " " printhl "Arch Linux\n" -printhl "${C_H2}http://www.archlinux.org" +printhl "${C_H2}https://www.archlinux.org" printsep
-# mount the api filesystems +# mount the API file systems # /proc, /sys, /run, /dev, /run/lock, /dev/pts, /dev/shm mountpoint -q /proc || mount -t proc proc /proc -o nosuid,noexec,nodev mountpoint -q /sys || mount -t sysfs sys /sys -o nosuid,noexec,nodev @@ -30,7 +30,7 @@ if [[ ! -e /run/initramfs/root-fsck ]]; then # remount root ro to allow for fsck later on, we remount now to # make sure nothing can open files rw on root which would block a remount findmnt / --options ro &>/dev/null || - status "Mounting Root Read-Only" mount -o remount,ro / + status "Mounting root read-only" mount -o remount,ro / fi
run_hook sysinit_start @@ -47,14 +47,14 @@ case $HARDWARECLOCK in esac
if [[ $HWCLOCK_PARAMS ]]; then - stat_busy "Adjusting system time and setting kernel timezone" + stat_busy "Adjusting system time and setting kernel time zone"
- # Adjust the system time for timezone offset if rtc is not in UTC + # Adjust the system time for time zone offset if rtc is not in UTC # 1. Make creation time on device nodes sane (FS#8665) - # 2. Filesystem checks can depend on system time + # 2. File system checks can depend on system time # 3. This also sets the kernel time zone, used by e.g. vfat - # If TIMEZONE is not set in rc.conf, the timezone stored in /etc/localtime - # is used. If HARDWARECLOCK is not set in rc.conf, the value in + # If TIMEZONE is not set in /etc/rc.conf, the time zone stored in /etc/localtime + # is used. If HARDWARECLOCK is not set in /etc/rc.conf, the value in # /var/lib/hwclock/adjfile is used (in this case /var can not be a separate # partition). [[ $TIMEZONE ]] && export TZ=$TIMEZONE @@ -62,7 +62,7 @@ if [[ $HWCLOCK_PARAMS ]]; then unset TZ fi
-# Start/trigger UDev, load MODULES and settle UDev +# Start/trigger udev, load MODULES, and settle udev udevd_modprobe sysinit
if [[ -s /etc/locale.conf ]]; then @@ -70,9 +70,9 @@ if [[ -s /etc/locale.conf ]]; then [[ $LANG ]] && LOCALE=$LANG fi
-status 'Configuring Virtual Consoles' /usr/lib/systemd/systemd-vconsole-setup +status 'Configuring virtual consoles' /usr/lib/systemd/systemd-vconsole-setup
-# bring up the loopback interface +# Bring up the loopback interface [[ -d /sys/class/net/lo ]] && status "Bringing up loopback interface" ip link set up dev lo
@@ -80,11 +80,11 @@ status 'Configuring Virtual Consoles' /usr/lib/systemd/systemd-vconsole-setup [[ $USEDMRAID = [Yy][Ee][Ss] && -x $(type -P dmraid) ]] && status "Activating FakeRAID arrays" dmraid -i -ay
-# BTRFS devices detection +# Btrfs devices detection [[ $USEBTRFS = [Yy][Ee][Ss] && -x $(type -P btrfs) ]] && - status "Activating BTRFS volumes" btrfs device scan + status "Activating Btrfs volumes" btrfs device scan
-# Activate LVM2 groups if any +# Activate LVM2 groups, if any activate_vgs
# Set up non-root encrypted partition mappings @@ -96,10 +96,10 @@ if [[ -f /etc/crypttab ]] && type -p cryptsetup >/dev/null; then (( crypto_unlocked )) && activate_vgs fi
-# Check filesystems +# Check file systems run_hook sysinit_prefsck if [[ -x $(type -P fsck) ]]; then - stat_busy "Checking Filesystems" + stat_busy "Checking file systems" fsck_all >|"${FSCK_OUT:-/dev/stdout}" 2>|"${FSCK_ERR:-/dev/stdout}" declare -r fsckret=$? (( fsckret <= 1 )) && stat_done || stat_fail @@ -111,25 +111,25 @@ run_hook sysinit_postfsck # Single-user login and/or automatic reboot if needed fsck_reboot $fsckret
-status "Remounting Root and API filesystems" \ +status "Remounting root and API file systems" \ /usr/lib/systemd/systemd-remount-fs
-# now mount all the local filesystems +# now mount all the local file systems run_hook sysinit_premount -status "Mounting Local Filesystems" \ +status "Mounting local file systems" \ mount_all run_hook sysinit_postmount
-# enable monitoring of lvm2 groups, now that the filesystems are mounted rw +# Enable monitoring of LVM2 groups, now that the file systems are mounted rw [[ $USELVM = [Yy][Ee][Ss] && -x $(type -P lvm) && -d /sys/block ]] && status "Activating monitoring of LVM2 groups" \ vgchange --monitor y >/dev/null
-status "Activating Swap" swapon -a +status "Activating swap" swapon -a
-[[ $TIMEZONE ]] && status "Configuring Time Zone" set_timezone "$TIMEZONE" +[[ $TIMEZONE ]] && status "Configuring time zone" set_time_zone "$TIMEZONE"
-status 'Initializing Random Seed' /usr/lib/systemd/systemd-random-seed load +status 'Initializing random seed' /usr/lib/systemd/systemd-random-seed load
# Remove leftover files remove_leftover @@ -138,11 +138,11 @@ if [[ -s /etc/hostname ]]; then HOSTNAME=$(< /etc/hostname) fi if [[ $HOSTNAME ]]; then - stat_busy "Setting Hostname: $HOSTNAME" + stat_busy "Setting hostname: $HOSTNAME" echo "$HOSTNAME" >| /proc/sys/kernel/hostname && stat_done || stat_fail fi
-stat_busy "Saving dmesg Log" +stat_busy "Saving dmesg log" if [[ -e /proc/sys/kernel/dmesg_restrict ]] && (( $(< /proc/sys/kernel/dmesg_restrict) == 1 )); then install -Tm 0600 <( dmesg ) /var/log/dmesg.log -- 1.7.11