* This scripts, now runs only in x86_64. * build.sh does not require arguments to run (no more build, clean, purge). * /usr/share split is not done anymore: there are some differences between two arches. (ISO size +60MiB) * /usr/lib/modules split is not done anymore: this was never enabled officially in aitab. Tested and works fine. Maybe some small cosmetic changes needed. https://github.com/djgera/archiso/tree/experimental Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar> --- configs/releng/aitab | 5 +- configs/releng/build.sh | 508 +++++++-------------- configs/releng/syslinux.dual/archiso.cfg | 11 - configs/releng/syslinux.dual/archiso_head.cfg | 25 - configs/releng/syslinux.dual/archiso_pxe32.cfg | 32 -- configs/releng/syslinux.dual/archiso_pxe64.cfg | 32 -- .../releng/syslinux.dual/archiso_pxe_32_inc.cfg | 3 - .../releng/syslinux.dual/archiso_pxe_both_inc.cfg | 4 - .../releng/syslinux.dual/archiso_pxe_choose.cfg | 11 - configs/releng/syslinux.dual/archiso_sys32.cfg | 9 - configs/releng/syslinux.dual/archiso_sys64.cfg | 9 - .../releng/syslinux.dual/archiso_sys_32_inc.cfg | 3 - .../releng/syslinux.dual/archiso_sys_both_inc.cfg | 4 - .../releng/syslinux.dual/archiso_sys_choose.cfg | 11 - configs/releng/syslinux.dual/archiso_tail.cfg | 27 -- configs/releng/syslinux.dual/syslinux.cfg | 5 - configs/releng/syslinux/archiso.cfg | 4 +- configs/releng/syslinux/archiso_head.cfg | 2 +- configs/releng/syslinux/archiso_pxe.cfg | 32 -- configs/releng/syslinux/archiso_pxe32.cfg | 32 ++ configs/releng/syslinux/archiso_pxe64.cfg | 32 ++ configs/releng/syslinux/archiso_pxe_32_inc.cfg | 3 + configs/releng/syslinux/archiso_pxe_both_inc.cfg | 4 + configs/releng/syslinux/archiso_pxe_choose.cfg | 11 + configs/releng/syslinux/archiso_pxe_inc.cfg | 3 - configs/releng/syslinux/archiso_sys.cfg | 9 - configs/releng/syslinux/archiso_sys32.cfg | 9 + configs/releng/syslinux/archiso_sys64.cfg | 9 + configs/releng/syslinux/archiso_sys_32_inc.cfg | 3 + configs/releng/syslinux/archiso_sys_both_inc.cfg | 4 + configs/releng/syslinux/archiso_sys_choose.cfg | 11 + configs/releng/syslinux/archiso_sys_inc.cfg | 3 - 32 files changed, 281 insertions(+), 589 deletions(-) delete mode 100644 configs/releng/syslinux.dual/archiso.cfg delete mode 100644 configs/releng/syslinux.dual/archiso_head.cfg delete mode 100644 configs/releng/syslinux.dual/archiso_pxe32.cfg delete mode 100644 configs/releng/syslinux.dual/archiso_pxe64.cfg delete mode 100644 configs/releng/syslinux.dual/archiso_pxe_32_inc.cfg delete mode 100644 configs/releng/syslinux.dual/archiso_pxe_both_inc.cfg delete mode 100644 configs/releng/syslinux.dual/archiso_pxe_choose.cfg delete mode 100644 configs/releng/syslinux.dual/archiso_sys32.cfg delete mode 100644 configs/releng/syslinux.dual/archiso_sys64.cfg delete mode 100644 configs/releng/syslinux.dual/archiso_sys_32_inc.cfg delete mode 100644 configs/releng/syslinux.dual/archiso_sys_both_inc.cfg delete mode 100644 configs/releng/syslinux.dual/archiso_sys_choose.cfg delete mode 100644 configs/releng/syslinux.dual/archiso_tail.cfg delete mode 100644 configs/releng/syslinux.dual/syslinux.cfg delete mode 100644 configs/releng/syslinux/archiso_pxe.cfg create mode 100644 configs/releng/syslinux/archiso_pxe32.cfg create mode 100644 configs/releng/syslinux/archiso_pxe64.cfg create mode 100644 configs/releng/syslinux/archiso_pxe_32_inc.cfg create mode 100644 configs/releng/syslinux/archiso_pxe_both_inc.cfg create mode 100644 configs/releng/syslinux/archiso_pxe_choose.cfg delete mode 100644 configs/releng/syslinux/archiso_pxe_inc.cfg delete mode 100644 configs/releng/syslinux/archiso_sys.cfg create mode 100644 configs/releng/syslinux/archiso_sys32.cfg create mode 100644 configs/releng/syslinux/archiso_sys64.cfg create mode 100644 configs/releng/syslinux/archiso_sys_32_inc.cfg create mode 100644 configs/releng/syslinux/archiso_sys_both_inc.cfg create mode 100644 configs/releng/syslinux/archiso_sys_choose.cfg delete mode 100644 configs/releng/syslinux/archiso_sys_inc.cfg diff --git a/configs/releng/aitab b/configs/releng/aitab index ede4033..b7e9a17 100644 --- a/configs/releng/aitab +++ b/configs/releng/aitab @@ -1,4 +1,3 @@ # <img> <mnt> <arch> <sfs_comp> <fs_type> <fs_size> -root-image / %ARCH% xz ext4 50% -usr-lib-modules /usr/lib/modules %ARCH% xz ext4 50% -usr-share /usr/share any xz ext4 50% +root-image / i686 xz ext4 50% +root-image / x86_64 xz ext4 50% diff --git a/configs/releng/build.sh b/configs/releng/build.sh index ca73e89..5cf27c2 100755 --- a/configs/releng/build.sh +++ b/configs/releng/build.sh @@ -6,286 +6,182 @@ iso_name=archlinux iso_label="ARCH_$(date +%Y%m)" iso_version=$(date +%Y.%m.%d) install_dir=arch -arch=$(uname -m) work_dir=work out_dir=out -verbose="" -cmd_args="" +arch=x86_64 +verbose="" +pacman_conf=${work_dir}/pacman.conf script_path=$(readlink -f ${0%/*}) -setup_workdir() { - cache_dirs=($(pacman -v 2>&1 | grep '^Cache Dirs:' | sed 's/Cache Dirs:\s*//g')) - mkdir -p "${work_dir}" - pacman_conf="${work_dir}/pacman.conf" - sed -r "s|^#?\\s*CacheDir.+|CacheDir = $(echo -n ${cache_dirs[@]})|g" \ - "${script_path}/pacman.conf" > "${pacman_conf}" +# Setup custom pacman.conf with current cache directories. +make_pacman_conf() { + local _cache_dirs + _cache_dirs=($(pacman -v 2>&1 | grep '^Cache Dirs:' | sed 's/Cache Dirs:\s*//g')) + sed -r "s|^#?\\s*CacheDir.+|CacheDir = $(echo -n ${_cache_dirs[@]})|g" ${script_path}/pacman.conf > ${pacman_conf} } -# Base installation (root-image) +run_mkarchiso() { + setarch ${arch} mkarchiso ${verbose} -w "${work_dir}/${arch}" -C "${pacman_conf}" -D "${install_dir}" "$@" +} + +# Base installation, plus needed packages (root-image) make_basefs() { - mkarchiso ${verbose} -w "${work_dir}" -C "${pacman_conf}" -D "${install_dir}" init - mkarchiso ${verbose} -w "${work_dir}" -C "${pacman_conf}" -D "${install_dir}" -p "memtest86+ mkinitcpio-nfs-utils nbd" install + run_mkarchiso init + run_mkarchiso -p "memtest86+ mkinitcpio-nfs-utils nbd" install } # Additional packages (root-image) make_packages() { - mkarchiso ${verbose} -w "${work_dir}" -C "${pacman_conf}" -D "${install_dir}" -p "$(grep -h -v ^# ${script_path}/packages.{both,${arch}})" install + run_mkarchiso -p "$(grep -h -v ^# ${script_path}/packages.{both,${arch}})" install } -# Copy mkinitcpio archiso hooks (root-image) +# Copy mkinitcpio archiso hooks and build initramfs (root-image) make_setup_mkinitcpio() { - if [[ ! -e ${work_dir}/build.${FUNCNAME} ]]; then - local _hook - for _hook in archiso archiso_shutdown archiso_pxe_common archiso_pxe_nbd archiso_pxe_http archiso_pxe_nfs archiso_loop_mnt; do - cp /usr/lib/initcpio/hooks/${_hook} ${work_dir}/root-image/usr/lib/initcpio/hooks - cp /usr/lib/initcpio/install/${_hook} ${work_dir}/root-image/usr/lib/initcpio/install - done - cp /usr/lib/initcpio/install/archiso_kms ${work_dir}/root-image/usr/lib/initcpio/install - cp /usr/lib/initcpio/archiso_shutdown ${work_dir}/root-image/usr/lib/initcpio - cp ${script_path}/mkinitcpio.conf ${work_dir}/root-image/etc/mkinitcpio-archiso.conf - : > ${work_dir}/build.${FUNCNAME} - fi + local _hook + for _hook in archiso archiso_shutdown archiso_pxe_common archiso_pxe_nbd archiso_pxe_http archiso_pxe_nfs archiso_loop_mnt; do + cp /usr/lib/initcpio/hooks/${_hook} ${work_dir}/${arch}/root-image/usr/lib/initcpio/hooks + cp /usr/lib/initcpio/install/${_hook} ${work_dir}/${arch}/root-image/usr/lib/initcpio/install + done + cp /usr/lib/initcpio/install/archiso_kms ${work_dir}/${arch}/root-image/usr/lib/initcpio/install + cp /usr/lib/initcpio/archiso_shutdown ${work_dir}/${arch}/root-image/usr/lib/initcpio + cp ${script_path}/mkinitcpio.conf ${work_dir}/${arch}/root-image/etc/mkinitcpio-archiso.conf + run_mkarchiso -r 'mkinitcpio -c /etc/mkinitcpio-archiso.conf -k /boot/vmlinuz-linux -g /boot/archiso.img' run } -# Prepare ${install_dir}/boot/ -make_boot() { - if [[ ! -e ${work_dir}/build.${FUNCNAME} ]]; then - local _src=${work_dir}/root-image - local _dst_boot=${work_dir}/iso/${install_dir}/boot - mkdir -p ${_dst_boot}/${arch} - mkarchiso ${verbose} -w "${work_dir}" -C "${pacman_conf}" -D "${install_dir}" \ - -r 'mkinitcpio -c /etc/mkinitcpio-archiso.conf -k /boot/vmlinuz-linux -g /boot/archiso.img' \ - run - mv ${_src}/boot/archiso.img ${_dst_boot}/${arch}/archiso.img - mv ${_src}/boot/vmlinuz-linux ${_dst_boot}/${arch}/vmlinuz - cp ${_src}/boot/memtest86+/memtest.bin ${_dst_boot}/memtest - cp ${_src}/usr/share/licenses/common/GPL2/license.txt ${_dst_boot}/memtest.COPYING - : > ${work_dir}/build.${FUNCNAME} - fi -} +# Customize installation (root-image) +make_customize_root_image() { + cp -af ${script_path}/root-image ${work_dir}/${arch} -make_efi() { - if [[ ! -e ${work_dir}/build.${FUNCNAME} ]]; then - if [[ ${arch} == "x86_64" ]]; then + patch ${work_dir}/${arch}/root-image/usr/bin/pacman-key < ${script_path}/pacman-key-4.0.3_unattended-keyring-init.patch + wget -O ${work_dir}/${arch}/root-image/etc/pacman.d/mirrorlist 'https://www.archlinux.org/mirrorlist/?country=all&protocol=http&use_mirror_status=on' - mkdir -p ${work_dir}/iso/EFI/boot - cp ${work_dir}/root-image/usr/lib/gummiboot/gummibootx64.efi ${work_dir}/iso/EFI/boot/bootx64.efi + lynx -dump -nolist 'https://wiki.archlinux.org/index.php/Installation_Guide?action=render' >> ${work_dir}/${arch}/root-image/root/install.txt - mkdir -p ${work_dir}/iso/loader/entries - cp ${script_path}/efiboot/loader/loader.conf ${work_dir}/iso/loader/ - cp ${script_path}/efiboot/loader/entries/uefi-shell-v2-x86_64.conf ${work_dir}/iso/loader/entries/ - cp ${script_path}/efiboot/loader/entries/uefi-shell-v1-x86_64.conf ${work_dir}/iso/loader/entries/ + run_mkarchiso -r '/root/customize_root_image.sh' run + rm ${work_dir}/${arch}/root-image/root/customize_root_image.sh +} - sed "s|%ARCHISO_LABEL%|${iso_label}|g; - s|%INSTALL_DIR%|${install_dir}|g" ${script_path}/efiboot/loader/entries/archiso-x86_64-usb.conf > ${work_dir}/iso/loader/entries/archiso-x86_64.conf +# Prepare kernel/initramfs ${install_dir}/boot/ +make_boot() { + mkdir -p ${work_dir}/iso/${install_dir}/boot/${arch} + cp ${work_dir}/${arch}/root-image/boot/archiso.img ${work_dir}/iso/${install_dir}/boot/${arch}/archiso.img + cp ${work_dir}/${arch}/root-image/boot/vmlinuz-linux ${work_dir}/iso/${install_dir}/boot/${arch}/vmlinuz +} - # EFI Shell 2.0 for UEFI 2.3+ ( http://sourceforge.net/apps/mediawiki/tianocore/index.php?title=UEFI_Shell ) - wget -O ${work_dir}/iso/EFI/shellx64_v2.efi https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2/ShellBinPkg/UefiShe... - # EFI Shell 1.0 for non UEFI 2.3+ ( http://sourceforge.net/apps/mediawiki/tianocore/index.php?title=Efi-shell ) - wget -O ${work_dir}/iso/EFI/shellx64_v1.efi https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2/EdkShellBinPkg/Full... +# Add other aditional/extra files to ${install_dir}/boot/ +make_boot_extra() { + cp ${work_dir}/x86_64/root-image/boot/memtest86+/memtest.bin ${work_dir}/iso/${install_dir}/boot/memtest + cp ${work_dir}/x86_64/root-image/usr/share/licenses/common/GPL2/license.txt ${work_dir}/iso/${install_dir}/boot/memtest.COPYING +} - fi - : > ${work_dir}/build.${FUNCNAME} - fi +# Prepare /EFI +make_efi() { + mkdir -p ${work_dir}/iso/EFI/boot + cp ${work_dir}/x86_64/root-image/usr/lib/gummiboot/gummibootx64.efi ${work_dir}/iso/EFI/boot/bootx64.efi + + mkdir -p ${work_dir}/iso/loader/entries + cp ${script_path}/efiboot/loader/loader.conf ${work_dir}/iso/loader/ + cp ${script_path}/efiboot/loader/entries/uefi-shell-v2-x86_64.conf ${work_dir}/iso/loader/entries/ + cp ${script_path}/efiboot/loader/entries/uefi-shell-v1-x86_64.conf ${work_dir}/iso/loader/entries/ + + sed "s|%ARCHISO_LABEL%|${iso_label}|g; + s|%INSTALL_DIR%|${install_dir}|g" \ + ${script_path}/efiboot/loader/entries/archiso-x86_64-usb.conf > ${work_dir}/iso/loader/entries/archiso-x86_64.conf + + # EFI Shell 2.0 for UEFI 2.3+ ( http://sourceforge.net/apps/mediawiki/tianocore/index.php?title=UEFI_Shell ) + wget -O ${work_dir}/iso/EFI/shellx64_v2.efi https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2/ShellBinPkg/UefiShe... + # EFI Shell 1.0 for non UEFI 2.3+ ( http://sourceforge.net/apps/mediawiki/tianocore/index.php?title=Efi-shell ) + wget -O ${work_dir}/iso/EFI/shellx64_v1.efi https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2/EdkShellBinPkg/Full... } +# Prepare efiboot.img::/EFI for "El Torito" EFI boot mode make_efiboot() { - if [[ ! -e ${work_dir}/build.${FUNCNAME} ]]; then - if [[ ${arch} == "x86_64" ]]; then - - mkdir -p ${work_dir}/iso/EFI/archiso - truncate -s 31M ${work_dir}/iso/EFI/archiso/efiboot.img - mkfs.vfat -n ARCHISO_EFI ${work_dir}/iso/EFI/archiso/efiboot.img + mkdir -p ${work_dir}/iso/EFI/archiso + truncate -s 31M ${work_dir}/iso/EFI/archiso/efiboot.img + mkfs.vfat -n ARCHISO_EFI ${work_dir}/iso/EFI/archiso/efiboot.img - mkdir -p ${work_dir}/efiboot - mount ${work_dir}/iso/EFI/archiso/efiboot.img ${work_dir}/efiboot + mkdir -p ${work_dir}/efiboot + mount ${work_dir}/iso/EFI/archiso/efiboot.img ${work_dir}/efiboot - mkdir -p ${work_dir}/efiboot/EFI/archiso - cp ${work_dir}/iso/${install_dir}/boot/x86_64/vmlinuz ${work_dir}/efiboot/EFI/archiso/vmlinuz.efi - cp ${work_dir}/iso/${install_dir}/boot/x86_64/archiso.img ${work_dir}/efiboot/EFI/archiso/archiso.img + mkdir -p ${work_dir}/efiboot/EFI/archiso + cp ${work_dir}/iso/${install_dir}/boot/x86_64/vmlinuz ${work_dir}/efiboot/EFI/archiso/vmlinuz.efi + cp ${work_dir}/iso/${install_dir}/boot/x86_64/archiso.img ${work_dir}/efiboot/EFI/archiso/archiso.img - mkdir -p ${work_dir}/efiboot/EFI/boot - cp ${work_dir}/root-image/usr/lib/gummiboot/gummibootx64.efi ${work_dir}/efiboot/EFI/boot/bootx64.efi + mkdir -p ${work_dir}/efiboot/EFI/boot + cp ${work_dir}/x86_64/root-image/usr/lib/gummiboot/gummibootx64.efi ${work_dir}/efiboot/EFI/boot/bootx64.efi - mkdir -p ${work_dir}/efiboot/loader/entries - cp ${script_path}/efiboot/loader/loader.conf ${work_dir}/efiboot/loader/ - cp ${script_path}/efiboot/loader/entries/uefi-shell-v2-x86_64.conf ${work_dir}/efiboot/loader/entries/ - cp ${script_path}/efiboot/loader/entries/uefi-shell-v1-x86_64.conf ${work_dir}/efiboot/loader/entries/ + mkdir -p ${work_dir}/efiboot/loader/entries + cp ${script_path}/efiboot/loader/loader.conf ${work_dir}/efiboot/loader/ + cp ${script_path}/efiboot/loader/entries/uefi-shell-v2-x86_64.conf ${work_dir}/efiboot/loader/entries/ + cp ${script_path}/efiboot/loader/entries/uefi-shell-v1-x86_64.conf ${work_dir}/efiboot/loader/entries/ - sed "s|%ARCHISO_LABEL%|${iso_label}|g; - s|%INSTALL_DIR%|${install_dir}|g" ${script_path}/efiboot/loader/entries/archiso-x86_64-cd.conf > ${work_dir}/efiboot/loader/entries/archiso-x86_64.conf + sed "s|%ARCHISO_LABEL%|${iso_label}|g; + s|%INSTALL_DIR%|${install_dir}|g" \ + ${script_path}/efiboot/loader/entries/archiso-x86_64-cd.conf > ${work_dir}/efiboot/loader/entries/archiso-x86_64.conf - cp ${work_dir}/iso/EFI/shellx64_v2.efi ${work_dir}/efiboot/EFI/ - cp ${work_dir}/iso/EFI/shellx64_v1.efi ${work_dir}/efiboot/EFI/ + cp ${work_dir}/iso/EFI/shellx64_v2.efi ${work_dir}/efiboot/EFI/ + cp ${work_dir}/iso/EFI/shellx64_v1.efi ${work_dir}/efiboot/EFI/ - umount ${work_dir}/efiboot - - fi - : > ${work_dir}/build.${FUNCNAME} - fi + umount ${work_dir}/efiboot } # Prepare /${install_dir}/boot/syslinux make_syslinux() { - if [[ ! -e ${work_dir}/build.${FUNCNAME} ]]; then - local _src_syslinux=${work_dir}/root-image/usr/lib/syslinux - local _dst_syslinux=${work_dir}/iso/${install_dir}/boot/syslinux - mkdir -p ${_dst_syslinux} - for _cfg in ${script_path}/syslinux/*.cfg; do - sed "s|%ARCHISO_LABEL%|${iso_label}|g; - s|%INSTALL_DIR%|${install_dir}|g; - s|%ARCH%|${arch}|g" ${_cfg} > ${_dst_syslinux}/${_cfg##*/} - done - cp ${script_path}/syslinux/splash.png ${_dst_syslinux} - cp ${_src_syslinux}/*.c32 ${_dst_syslinux} - cp ${_src_syslinux}/*.com ${_dst_syslinux} - cp ${_src_syslinux}/*.0 ${_dst_syslinux} - cp ${_src_syslinux}/memdisk ${_dst_syslinux} - mkdir -p ${_dst_syslinux}/hdt - cat ${work_dir}/root-image/usr/share/hwdata/pci.ids | gzip -9 > ${_dst_syslinux}/hdt/pciids.gz - cat ${work_dir}/root-image/usr/lib/modules/*-ARCH/modules.alias | gzip -9 > ${_dst_syslinux}/hdt/modalias.gz - : > ${work_dir}/build.${FUNCNAME} - fi + mkdir -p ${work_dir}/iso/${install_dir}/boot/syslinux + for _cfg in ${script_path}/syslinux/*.cfg; do + sed "s|%ARCHISO_LABEL%|${iso_label}|g; + s|%INSTALL_DIR%|${install_dir}|g" ${_cfg} > ${work_dir}/iso/${install_dir}/boot/syslinux/${_cfg##*/} + done + cp ${script_path}/syslinux/splash.png ${work_dir}/iso/${install_dir}/boot/syslinux + cp ${work_dir}/x86_64/root-image/usr/lib/syslinux/*.c32 ${work_dir}/iso/${install_dir}/boot/syslinux + cp ${work_dir}/x86_64/root-image/usr/lib/syslinux/*.com ${work_dir}/iso/${install_dir}/boot/syslinux + cp ${work_dir}/x86_64/root-image/usr/lib/syslinux/*.0 ${work_dir}/iso/${install_dir}/boot/syslinux + cp ${work_dir}/x86_64/root-image/usr/lib/syslinux/memdisk ${work_dir}/iso/${install_dir}/boot/syslinux + mkdir -p ${work_dir}/iso/${install_dir}/boot/syslinux/hdt + gzip -c -9 ${work_dir}/x86_64/root-image/usr/share/hwdata/pci.ids > ${work_dir}/iso/${install_dir}/boot/syslinux/hdt/pciids.gz + gzip -c -9 ${work_dir}/x86_64/root-image/usr/lib/modules/*-ARCH/modules.alias > ${work_dir}/iso/${install_dir}/boot/syslinux/hdt/modalias.gz } # Prepare /isolinux make_isolinux() { - if [[ ! -e ${work_dir}/build.${FUNCNAME} ]]; then - mkdir -p ${work_dir}/iso/isolinux - sed "s|%INSTALL_DIR%|${install_dir}|g" ${script_path}/isolinux/isolinux.cfg > ${work_dir}/iso/isolinux/isolinux.cfg - cp ${work_dir}/root-image/usr/lib/syslinux/isolinux.bin ${work_dir}/iso/isolinux/ - cp ${work_dir}/root-image/usr/lib/syslinux/isohdpfx.bin ${work_dir}/iso/isolinux/ - : > ${work_dir}/build.${FUNCNAME} - fi + mkdir -p ${work_dir}/iso/isolinux + sed "s|%INSTALL_DIR%|${install_dir}|g" ${script_path}/isolinux/isolinux.cfg > ${work_dir}/iso/isolinux/isolinux.cfg + cp ${work_dir}/x86_64/root-image/usr/lib/syslinux/isolinux.bin ${work_dir}/iso/isolinux/ + cp ${work_dir}/x86_64/root-image/usr/lib/syslinux/isohdpfx.bin ${work_dir}/iso/isolinux/ } -# Customize installation (root-image) -make_customize_root_image() { - if [[ ! -e ${work_dir}/build.${FUNCNAME} ]]; then - cp -af ${script_path}/root-image ${work_dir} - - patch ${work_dir}/root-image/usr/bin/pacman-key < ${script_path}/pacman-key-4.0.3_unattended-keyring-init.patch - wget -O ${work_dir}/root-image/etc/pacman.d/mirrorlist 'https://www.archlinux.org/mirrorlist/?country=all&protocol=http&use_mirror_status=on' - - lynx -dump -nolist 'https://wiki.archlinux.org/index.php/Installation_Guide?action=render' >> ${work_dir}/root-image/root/install.txt - - mkarchiso ${verbose} -w "${work_dir}" -C "${pacman_conf}" -D "${install_dir}" -r '/root/customize_root_image.sh' run - rm ${work_dir}/root-image/root/customize_root_image.sh - : > ${work_dir}/build.${FUNCNAME} - fi -} - -# Split out /usr/lib/modules from root-image (makes more "dual-iso" friendly) -make_usr_lib_modules() { - if [[ ! -e ${work_dir}/build.${FUNCNAME} ]]; then - mv ${work_dir}/root-image/usr/lib/modules ${work_dir}/usr-lib-modules - : > ${work_dir}/build.${FUNCNAME} - fi -} - -# Split out /usr/share from root-image (makes more "dual-iso" friendly) -make_usr_share() { - if [[ ! -e ${work_dir}/build.${FUNCNAME} ]]; then - mv ${work_dir}/root-image/usr/share ${work_dir}/usr-share - : > ${work_dir}/build.${FUNCNAME} - fi -} -# Process aitab make_aitab() { - if [[ ! -e ${work_dir}/build.${FUNCNAME} ]]; then - sed "s|%ARCH%|${arch}|g" ${script_path}/aitab > ${work_dir}/iso/${install_dir}/aitab - : > ${work_dir}/build.${FUNCNAME} - fi + mkdir -p ${work_dir}/iso/${install_dir} + cp ${script_path}/aitab ${work_dir}/iso/${install_dir}/aitab } -# Build all filesystem images specified in aitab (.fs .fs.sfs .sfs) +# Build all filesystem images specified in aitab (.fs.sfs .sfs) make_prepare() { - mkarchiso ${verbose} -w "${work_dir}" -C "${pacman_conf}" -D "${install_dir}" pkglist - mkarchiso ${verbose} -w "${work_dir}" -C "${pacman_conf}" -D "${install_dir}" prepare + cp -a -l -f ${work_dir}/${arch}/root-image ${work_dir} + setarch ${arch} mkarchiso ${verbose} -w "${work_dir}" -D "${install_dir}" pkglist + setarch ${arch} mkarchiso ${verbose} -w "${work_dir}" -D "${install_dir}" prepare + rm -rf ${work_dir}/root-image + # rm -rf ${work_dir}/${arch}/root-image (if low space, this helps) } # Build ISO make_iso() { - mkarchiso ${verbose} -w "${work_dir}" -C "${pacman_conf}" -D "${install_dir}" checksum - mkarchiso ${verbose} -w "${work_dir}" -C "${pacman_conf}" -D "${install_dir}" -L "${iso_label}" -o "${out_dir}" iso "${iso_name}-${iso_version}-${arch}.iso" + mkarchiso ${verbose} -w "${work_dir}" -D "${install_dir}" checksum + mkarchiso ${verbose} -w "${work_dir}" -D "${install_dir}" -L "${iso_label}" -o "${out_dir}" iso "${iso_name}-${iso_version}-dual.iso" } -# Build dual-iso images from ${work_dir}/i686/iso and ${work_dir}/x86_64/iso -make_dual() { - if [[ ! -e ${work_dir}/dual/build.${FUNCNAME} ]]; then - if [[ ! -d ${work_dir}/i686/iso || ! -d ${work_dir}/x86_64/iso ]]; then - echo "ERROR: i686 or x86_64 builds does not exist." - _usage 1 - fi - mkdir -p ${work_dir}/dual/iso - cp -a -l -f ${work_dir}/x86_64/iso ${work_dir}/dual - cp -a -l -n ${work_dir}/i686/iso ${work_dir}/dual - rm -f ${work_dir}/dual/iso/${install_dir}/aitab - rm -f ${work_dir}/dual/iso/${install_dir}/boot/syslinux/*.cfg - paste -d"\n" <(sed "s|%ARCH%|i686|g" ${script_path}/aitab) \ - <(sed "s|%ARCH%|x86_64|g" ${script_path}/aitab) | uniq > ${work_dir}/dual/iso/${install_dir}/aitab - for _cfg in ${script_path}/syslinux.dual/*.cfg; do - sed "s|%ARCHISO_LABEL%|${iso_label}|g; - s|%INSTALL_DIR%|${install_dir}|g" ${_cfg} > ${work_dir}/dual/iso/${install_dir}/boot/syslinux/${_cfg##*/} - done - mkarchiso ${verbose} -w "${work_dir}/dual" -D "${install_dir}" checksum - mkarchiso ${verbose} -w "${work_dir}/dual" -D "${install_dir}" -L "${iso_label}" -o "${out_dir}" iso "${iso_name}-${iso_version}-dual.iso" - : > ${work_dir}/dual/build.${FUNCNAME} - fi -} - -purge_single () -{ - if [[ -d ${work_dir} ]]; then - find ${work_dir} -mindepth 1 -maxdepth 1 \ - ! -path ${work_dir}/iso -prune \ - | xargs rm -rf - fi -} - -purge_dual () -{ - if [[ -d ${work_dir}/dual ]]; then - find ${work_dir}/dual -mindepth 1 -maxdepth 1 \ - ! -path ${work_dir}/dual/iso -prune \ - | xargs rm -rf +run_once() { + if [[ ! -e ${work_dir}/build.${1}_${arch} ]]; then + $1 + touch ${work_dir}/build.${1}_${arch} fi } -clean_single () -{ - rm -rf ${work_dir} - rm -f ${out_dir}/${iso_name}-${iso_version}-*-${arch}.iso -} - -clean_dual () -{ - rm -rf ${work_dir}/dual - rm -f ${out_dir}/${iso_name}-${iso_version}-*-dual.iso -} - -make_common_single() { - make_basefs - make_packages - make_setup_mkinitcpio - make_boot - make_efi - make_efiboot - make_syslinux - make_isolinux - make_customize_root_image - make_usr_lib_modules - make_usr_share - make_aitab - make_prepare - make_iso -} - _usage () { - echo "usage ${0} [options] command <command options>" + echo "usage ${0} [options]" echo echo " General options:" echo " -N <iso_name> Set an iso filename (prefix)" @@ -302,17 +198,6 @@ _usage () echo " Default: ${out_dir}" echo " -v Enable verbose output" echo " -h This help message" - echo - echo " Commands:" - echo " build <mode>" - echo " Build selected .iso by <mode>" - echo " purge <mode>" - echo " Clean working directory except iso/ directory of build <mode>" - echo " clean <mode>" - echo " Clean working directory and .iso file in output directory of build <mode>" - echo - echo " Command options:" - echo " <mode> Valid values 'single', 'dual' or 'all'" exit ${1} } @@ -321,132 +206,55 @@ if [[ ${EUID} -ne 0 ]]; then _usage 1 fi +if [[ $(uname -m) != x86_64 ]]; then + echo "This script needs to be run on x86_64" + _usage 1 +fi + while getopts 'N:V:L:D:w:o:vh' arg; do case "${arg}" in - N) - iso_name="${OPTARG}" - cmd_args+=" -N ${iso_name}" - ;; - V) - iso_version="${OPTARG}" - cmd_args+=" -V ${iso_version}" - ;; - L) - iso_label="${OPTARG}" - cmd_args+=" -L ${iso_label}" - ;; - D) - install_dir="${OPTARG}" - cmd_args+=" -D ${install_dir}" - ;; - w) - work_dir="${OPTARG}" - cmd_args+=" -w ${work_dir}" - ;; - o) - out_dir="${OPTARG}" - cmd_args+=" -o ${out_dir}" - ;; - v) - verbose="-v" - cmd_args+=" -v" - ;; - h|?) _usage 0 ;; + N) iso_name="${OPTARG}" ;; + V) iso_version="${OPTARG}" ;; + L) iso_label="${OPTARG}" ;; + D) install_dir="${OPTARG}" ;; + w) work_dir="${OPTARG}" ;; + o) out_dir="${OPTARG}" ;; + v) verbose="-v" ;; + h) _usage 0 ;; *) - _msg_error "Invalid argument '${arg}'" 0 - _usage 1 - ;; + echo "Invalid argument '${arg}'" + _usage 1 + ;; esac done -shift $((OPTIND - 1)) +mkdir -p ${work_dir} -if [[ $# -lt 1 ]]; then - echo "No command specified" - _usage 1 -fi -command_name="${1}" +run_once make_pacman_conf -if [[ $# -lt 2 ]]; then - echo "No command mode specified" - _usage 1 -fi -command_mode="${2}" +# Do all stuff for each root-image +for arch in i686 x86_64; do + run_once make_basefs + run_once make_packages + run_once make_setup_mkinitcpio + run_once make_customize_root_image +done -if [[ ${command_mode} == "all" && ${arch} != "x86_64" ]]; then - echo "This mode <all> needs to be run on x86_64" - _usage 1 -fi +for arch in i686 x86_64; do + run_once make_boot +done -if [[ ${command_mode} == "single" ]]; then - work_dir=${work_dir}/${arch} -fi +# Do all stuff for "iso" +run_once make_boot_extra +run_once make_efi +run_once make_efiboot +run_once make_syslinux +run_once make_isolinux + +run_once make_aitab + +for arch in i686 x86_64; do + run_once make_prepare +done -setup_workdir - -case "${command_name}" in - build) - case "${command_mode}" in - single) - make_common_single - ;; - dual) - make_dual - ;; - all) - $0 ${cmd_args} build single - $0 ${cmd_args} purge single - linux32 $0 ${cmd_args} build single - linux32 $0 ${cmd_args} purge single - $0 ${cmd_args} build dual - $0 ${cmd_args} purge dual - ;; - *) - echo "Invalid build mode '${command_mode}'" - _usage 1 - ;; - esac - ;; - purge) - case "${command_mode}" in - single) - purge_single - ;; - dual) - purge_dual - ;; - all) - $0 ${cmd_args} purge single - linux32 $0 ${cmd_args} purge single - $0 ${cmd_args} purge dual - ;; - *) - echo "Invalid purge mode '${command_mode}'" - _usage 1 - ;; - esac - ;; - clean) - case "${command_mode}" in - single) - clean_single - ;; - dual) - clean_dual - ;; - all) - $0 ${cmd_args} clean single - linux32 $0 ${cmd_args} clean single - $0 ${cmd_args} clean dual - ;; - *) - echo "Invalid clean mode '${command_mode}'" - _usage 1 - ;; - esac - ;; - *) - echo "Invalid command name '${command_name}'" - _usage 1 - ;; -esac +run_once make_iso diff --git a/configs/releng/syslinux.dual/archiso.cfg b/configs/releng/syslinux.dual/archiso.cfg deleted file mode 100644 index d1817af..0000000 --- a/configs/releng/syslinux.dual/archiso.cfg +++ /dev/null @@ -1,11 +0,0 @@ -DEFAULT select - -LABEL select -COM32 boot/syslinux/whichsys.c32 -APPEND -pxe- pxe -sys- sys -iso- sys - -LABEL pxe -CONFIG boot/syslinux/archiso_pxe_choose.cfg - -LABEL sys -CONFIG boot/syslinux/archiso_sys_choose.cfg diff --git a/configs/releng/syslinux.dual/archiso_head.cfg b/configs/releng/syslinux.dual/archiso_head.cfg deleted file mode 100644 index 81ad26e..0000000 --- a/configs/releng/syslinux.dual/archiso_head.cfg +++ /dev/null @@ -1,25 +0,0 @@ -SERIAL 0 38400 -UI boot/syslinux/vesamenu.c32 -MENU TITLE Arch Linux -MENU BACKGROUND boot/syslinux/splash.png - -MENU WIDTH 78 -MENU MARGIN 4 -MENU ROWS 7 -MENU VSHIFT 10 -MENU TABMSGROW 14 -MENU CMDLINEROW 14 -MENU HELPMSGROW 16 -MENU HELPMSGENDROW 29 - -# Refer to http://syslinux.zytor.com/wiki/index.php/Doc/menu - -MENU COLOR border 30;44 #40ffffff #a0000000 std -MENU COLOR title 1;36;44 #9033ccff #a0000000 std -MENU COLOR sel 7;37;40 #e0ffffff #20ffffff all -MENU COLOR unsel 37;44 #50ffffff #a0000000 std -MENU COLOR help 37;40 #c0ffffff #a0000000 std -MENU COLOR timeout_msg 37;40 #80ffffff #00000000 std -MENU COLOR timeout 1;37;40 #c0ffffff #00000000 std -MENU COLOR msg07 37;40 #90ffffff #a0000000 std -MENU COLOR tabmsg 31;40 #30ffffff #00000000 std diff --git a/configs/releng/syslinux.dual/archiso_pxe32.cfg b/configs/releng/syslinux.dual/archiso_pxe32.cfg deleted file mode 100644 index 4bdeefa..0000000 --- a/configs/releng/syslinux.dual/archiso_pxe32.cfg +++ /dev/null @@ -1,32 +0,0 @@ -LABEL arch32_nbd -TEXT HELP -Boot the Arch Linux (i686) live medium (Using NBD). It allows you to install Arch Linux or -perform system maintenance. -ENDTEXT -MENU LABEL Boot Arch Linux (i686) (NBD) -LINUX boot/i686/vmlinuz -INITRD boot/i686/archiso.img -APPEND archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% archiso_nbd_srv=${pxeserver} -IPAPPEND 3 - -LABEL arch32_nfs -TEXT HELP -Boot the Arch Linux (i686) live medium (Using NFS). It allows you to install Arch Linux or -perform system maintenance. -ENDTEXT -MENU LABEL Boot Arch Linux (i686) (NFS) -LINUX boot/i686/vmlinuz -INITRD boot/i686/archiso.img -APPEND archisobasedir=%INSTALL_DIR% archiso_nfs_srv=${pxeserver}:/run/archiso/bootmnt -IPAPPEND 3 - -LABEL arch32_http -TEXT HELP -Boot the Arch Linux (i686) live medium (Using HTTP). It allows you to install Arch Linux or -perform system maintenance. -ENDTEXT -MENU LABEL Boot Arch Linux (i686) (HTTP) -LINUX boot/i686/vmlinuz -INITRD boot/i686/archiso.img -APPEND archisobasedir=%INSTALL_DIR% archiso_http_srv=http://${pxeserver}/ -IPAPPEND 3 diff --git a/configs/releng/syslinux.dual/archiso_pxe64.cfg b/configs/releng/syslinux.dual/archiso_pxe64.cfg deleted file mode 100644 index 1676236..0000000 --- a/configs/releng/syslinux.dual/archiso_pxe64.cfg +++ /dev/null @@ -1,32 +0,0 @@ -LABEL arch64_nbd -TEXT HELP -Boot the Arch Linux (x86_64) live medium (Using NBD). It allows you to install Arch Linux or -perform system maintenance. -ENDTEXT -MENU LABEL Boot Arch Linux (x86_64) (NBD) -LINUX boot/x86_64/vmlinuz -INITRD boot/x86_64/archiso.img -APPEND archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% archiso_nbd_srv=${pxeserver} -IPAPPEND 3 - -LABEL arch64_nfs -TEXT HELP -Boot the Arch Linux (x86_64) live medium (Using NFS). It allows you to install Arch Linux or -perform system maintenance. -ENDTEXT -MENU LABEL Boot Arch Linux (x86_64) (NFS) -LINUX boot/x86_64/vmlinuz -INITRD boot/x86_64/archiso.img -APPEND archisobasedir=%INSTALL_DIR% archiso_nfs_srv=${pxeserver}:/run/archiso/bootmnt -IPAPPEND 3 - -LABEL arch64_http -TEXT HELP -Boot the Arch Linux (x86_64) live medium (Using HTTP). It allows you to install Arch Linux or -perform system maintenance. -ENDTEXT -MENU LABEL Boot Arch Linux (x86_64) (HTTP) -LINUX boot/x86_64/vmlinuz -INITRD boot/x86_64/archiso.img -APPEND archisobasedir=%INSTALL_DIR% archiso_http_srv=http://${pxeserver}/ -IPAPPEND 3 diff --git a/configs/releng/syslinux.dual/archiso_pxe_32_inc.cfg b/configs/releng/syslinux.dual/archiso_pxe_32_inc.cfg deleted file mode 100644 index e4115df..0000000 --- a/configs/releng/syslinux.dual/archiso_pxe_32_inc.cfg +++ /dev/null @@ -1,3 +0,0 @@ -INCLUDE boot/syslinux/archiso_head.cfg -INCLUDE boot/syslinux/archiso_pxe32.cfg -INCLUDE boot/syslinux/archiso_tail.cfg diff --git a/configs/releng/syslinux.dual/archiso_pxe_both_inc.cfg b/configs/releng/syslinux.dual/archiso_pxe_both_inc.cfg deleted file mode 100644 index 1593303..0000000 --- a/configs/releng/syslinux.dual/archiso_pxe_both_inc.cfg +++ /dev/null @@ -1,4 +0,0 @@ -INCLUDE boot/syslinux/archiso_head.cfg -INCLUDE boot/syslinux/archiso_pxe64.cfg -INCLUDE boot/syslinux/archiso_pxe32.cfg -INCLUDE boot/syslinux/archiso_tail.cfg diff --git a/configs/releng/syslinux.dual/archiso_pxe_choose.cfg b/configs/releng/syslinux.dual/archiso_pxe_choose.cfg deleted file mode 100644 index 6296065..0000000 --- a/configs/releng/syslinux.dual/archiso_pxe_choose.cfg +++ /dev/null @@ -1,11 +0,0 @@ -DEFAULT choose - -LABEL choose -COM32 boot/syslinux/ifcpu64.c32 -APPEND have64 -- nohave64 - -LABEL have64 -CONFIG boot/syslinux/archiso_pxe_both_inc.cfg - -LABEL nohave64 -CONFIG boot/syslinux/archiso_pxe_32_inc.cfg diff --git a/configs/releng/syslinux.dual/archiso_sys32.cfg b/configs/releng/syslinux.dual/archiso_sys32.cfg deleted file mode 100644 index 261579e..0000000 --- a/configs/releng/syslinux.dual/archiso_sys32.cfg +++ /dev/null @@ -1,9 +0,0 @@ -LABEL arch32 -TEXT HELP -Boot the Arch Linux (i686) live medium. It allows you to install Arch Linux or -perform system maintenance. -ENDTEXT -MENU LABEL Boot Arch Linux (i686) -LINUX boot/i686/vmlinuz -INITRD boot/i686/archiso.img -APPEND archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% diff --git a/configs/releng/syslinux.dual/archiso_sys64.cfg b/configs/releng/syslinux.dual/archiso_sys64.cfg deleted file mode 100644 index eb89813..0000000 --- a/configs/releng/syslinux.dual/archiso_sys64.cfg +++ /dev/null @@ -1,9 +0,0 @@ -LABEL arch64 -TEXT HELP -Boot the Arch Linux (x86_64) live medium. It allows you to install Arch Linux or -perform system maintenance. -ENDTEXT -MENU LABEL Boot Arch Linux (x86_64) -LINUX boot/x86_64/vmlinuz -INITRD boot/x86_64/archiso.img -APPEND archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% diff --git a/configs/releng/syslinux.dual/archiso_sys_32_inc.cfg b/configs/releng/syslinux.dual/archiso_sys_32_inc.cfg deleted file mode 100644 index 9e37093..0000000 --- a/configs/releng/syslinux.dual/archiso_sys_32_inc.cfg +++ /dev/null @@ -1,3 +0,0 @@ -INCLUDE boot/syslinux/archiso_head.cfg -INCLUDE boot/syslinux/archiso_sys32.cfg -INCLUDE boot/syslinux/archiso_tail.cfg diff --git a/configs/releng/syslinux.dual/archiso_sys_both_inc.cfg b/configs/releng/syslinux.dual/archiso_sys_both_inc.cfg deleted file mode 100644 index e885c40..0000000 --- a/configs/releng/syslinux.dual/archiso_sys_both_inc.cfg +++ /dev/null @@ -1,4 +0,0 @@ -INCLUDE boot/syslinux/archiso_head.cfg -INCLUDE boot/syslinux/archiso_sys64.cfg -INCLUDE boot/syslinux/archiso_sys32.cfg -INCLUDE boot/syslinux/archiso_tail.cfg diff --git a/configs/releng/syslinux.dual/archiso_sys_choose.cfg b/configs/releng/syslinux.dual/archiso_sys_choose.cfg deleted file mode 100644 index 24c597a..0000000 --- a/configs/releng/syslinux.dual/archiso_sys_choose.cfg +++ /dev/null @@ -1,11 +0,0 @@ -DEFAULT choose - -LABEL choose -COM32 boot/syslinux/ifcpu64.c32 -APPEND have64 -- nohave64 - -LABEL have64 -CONFIG boot/syslinux/archiso_sys_both_inc.cfg - -LABEL nohave64 -CONFIG boot/syslinux/archiso_sys_32_inc.cfg diff --git a/configs/releng/syslinux.dual/archiso_tail.cfg b/configs/releng/syslinux.dual/archiso_tail.cfg deleted file mode 100644 index a55548c..0000000 --- a/configs/releng/syslinux.dual/archiso_tail.cfg +++ /dev/null @@ -1,27 +0,0 @@ -LABEL existing -TEXT HELP -Boot an existing operating system. Press TAB to edit the disk and partition -number to boot. -ENDTEXT -MENU LABEL Boot existing OS -COM32 boot/syslinux/chain.c32 -APPEND hd0 0 - -# http://www.memtest.org/ -LABEL memtest -MENU LABEL Run Memtest86+ (RAM test) -LINUX boot/memtest - -# http://hdt-project.org/ -LABEL hdt -MENU LABEL Hardware Information (HDT) -COM32 boot/syslinux/hdt.c32 -APPEND modules_alias=boot/syslinux/hdt/modalias.gz pciids=boot/syslinux/hdt/pciids.gz - -LABEL reboot -MENU LABEL Reboot -COM32 boot/syslinux/reboot.c32 - -LABEL poweroff -MENU LABEL Power Off -COMBOOT boot/syslinux/poweroff.com diff --git a/configs/releng/syslinux.dual/syslinux.cfg b/configs/releng/syslinux.dual/syslinux.cfg deleted file mode 100644 index 3ee98de..0000000 --- a/configs/releng/syslinux.dual/syslinux.cfg +++ /dev/null @@ -1,5 +0,0 @@ -DEFAULT loadconfig - -LABEL loadconfig - CONFIG archiso.cfg - APPEND ../../ diff --git a/configs/releng/syslinux/archiso.cfg b/configs/releng/syslinux/archiso.cfg index 126fc77..d1817af 100644 --- a/configs/releng/syslinux/archiso.cfg +++ b/configs/releng/syslinux/archiso.cfg @@ -5,7 +5,7 @@ COM32 boot/syslinux/whichsys.c32 APPEND -pxe- pxe -sys- sys -iso- sys LABEL pxe -CONFIG boot/syslinux/archiso_pxe_inc.cfg +CONFIG boot/syslinux/archiso_pxe_choose.cfg LABEL sys -CONFIG boot/syslinux/archiso_sys_inc.cfg +CONFIG boot/syslinux/archiso_sys_choose.cfg diff --git a/configs/releng/syslinux/archiso_head.cfg b/configs/releng/syslinux/archiso_head.cfg index faa2588..81ad26e 100644 --- a/configs/releng/syslinux/archiso_head.cfg +++ b/configs/releng/syslinux/archiso_head.cfg @@ -5,7 +5,7 @@ MENU BACKGROUND boot/syslinux/splash.png MENU WIDTH 78 MENU MARGIN 4 -MENU ROWS 6 +MENU ROWS 7 MENU VSHIFT 10 MENU TABMSGROW 14 MENU CMDLINEROW 14 diff --git a/configs/releng/syslinux/archiso_pxe.cfg b/configs/releng/syslinux/archiso_pxe.cfg deleted file mode 100644 index 8bb60ed..0000000 --- a/configs/releng/syslinux/archiso_pxe.cfg +++ /dev/null @@ -1,32 +0,0 @@ -LABEL arch_nbd -TEXT HELP -Boot the Arch Linux live medium (Using NBD). It allows you to install Arch Linux or -perform system maintenance. -ENDTEXT -MENU LABEL Boot Arch Linux (NBD) -LINUX boot/%ARCH%/vmlinuz -INITRD boot/%ARCH%/archiso.img -APPEND archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% archiso_nbd_srv=${pxeserver} -IPAPPEND 3 - -LABEL arch_nfs -TEXT HELP -Boot the Arch Linux live medium (Using NFS). It allows you to install Arch Linux or -perform system maintenance. -ENDTEXT -MENU LABEL Boot Arch Linux (NFS) -LINUX boot/%ARCH%/vmlinuz -INITRD boot/%ARCH%/archiso.img -APPEND archisobasedir=%INSTALL_DIR% archiso_nfs_srv=${pxeserver}:/run/archiso/bootmnt -IPAPPEND 3 - -LABEL arch_http -TEXT HELP -Boot the Arch Linux live medium (Using HTTP). It allows you to install Arch Linux or -perform system maintenance. -ENDTEXT -MENU LABEL Boot Arch Linux (HTTP) -LINUX boot/%ARCH%/vmlinuz -INITRD boot/%ARCH%/archiso.img -APPEND archisobasedir=%INSTALL_DIR% archiso_http_srv=http://${pxeserver}/ -IPAPPEND 3 diff --git a/configs/releng/syslinux/archiso_pxe32.cfg b/configs/releng/syslinux/archiso_pxe32.cfg new file mode 100644 index 0000000..4bdeefa --- /dev/null +++ b/configs/releng/syslinux/archiso_pxe32.cfg @@ -0,0 +1,32 @@ +LABEL arch32_nbd +TEXT HELP +Boot the Arch Linux (i686) live medium (Using NBD). It allows you to install Arch Linux or +perform system maintenance. +ENDTEXT +MENU LABEL Boot Arch Linux (i686) (NBD) +LINUX boot/i686/vmlinuz +INITRD boot/i686/archiso.img +APPEND archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% archiso_nbd_srv=${pxeserver} +IPAPPEND 3 + +LABEL arch32_nfs +TEXT HELP +Boot the Arch Linux (i686) live medium (Using NFS). It allows you to install Arch Linux or +perform system maintenance. +ENDTEXT +MENU LABEL Boot Arch Linux (i686) (NFS) +LINUX boot/i686/vmlinuz +INITRD boot/i686/archiso.img +APPEND archisobasedir=%INSTALL_DIR% archiso_nfs_srv=${pxeserver}:/run/archiso/bootmnt +IPAPPEND 3 + +LABEL arch32_http +TEXT HELP +Boot the Arch Linux (i686) live medium (Using HTTP). It allows you to install Arch Linux or +perform system maintenance. +ENDTEXT +MENU LABEL Boot Arch Linux (i686) (HTTP) +LINUX boot/i686/vmlinuz +INITRD boot/i686/archiso.img +APPEND archisobasedir=%INSTALL_DIR% archiso_http_srv=http://${pxeserver}/ +IPAPPEND 3 diff --git a/configs/releng/syslinux/archiso_pxe64.cfg b/configs/releng/syslinux/archiso_pxe64.cfg new file mode 100644 index 0000000..1676236 --- /dev/null +++ b/configs/releng/syslinux/archiso_pxe64.cfg @@ -0,0 +1,32 @@ +LABEL arch64_nbd +TEXT HELP +Boot the Arch Linux (x86_64) live medium (Using NBD). It allows you to install Arch Linux or +perform system maintenance. +ENDTEXT +MENU LABEL Boot Arch Linux (x86_64) (NBD) +LINUX boot/x86_64/vmlinuz +INITRD boot/x86_64/archiso.img +APPEND archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% archiso_nbd_srv=${pxeserver} +IPAPPEND 3 + +LABEL arch64_nfs +TEXT HELP +Boot the Arch Linux (x86_64) live medium (Using NFS). It allows you to install Arch Linux or +perform system maintenance. +ENDTEXT +MENU LABEL Boot Arch Linux (x86_64) (NFS) +LINUX boot/x86_64/vmlinuz +INITRD boot/x86_64/archiso.img +APPEND archisobasedir=%INSTALL_DIR% archiso_nfs_srv=${pxeserver}:/run/archiso/bootmnt +IPAPPEND 3 + +LABEL arch64_http +TEXT HELP +Boot the Arch Linux (x86_64) live medium (Using HTTP). It allows you to install Arch Linux or +perform system maintenance. +ENDTEXT +MENU LABEL Boot Arch Linux (x86_64) (HTTP) +LINUX boot/x86_64/vmlinuz +INITRD boot/x86_64/archiso.img +APPEND archisobasedir=%INSTALL_DIR% archiso_http_srv=http://${pxeserver}/ +IPAPPEND 3 diff --git a/configs/releng/syslinux/archiso_pxe_32_inc.cfg b/configs/releng/syslinux/archiso_pxe_32_inc.cfg new file mode 100644 index 0000000..e4115df --- /dev/null +++ b/configs/releng/syslinux/archiso_pxe_32_inc.cfg @@ -0,0 +1,3 @@ +INCLUDE boot/syslinux/archiso_head.cfg +INCLUDE boot/syslinux/archiso_pxe32.cfg +INCLUDE boot/syslinux/archiso_tail.cfg diff --git a/configs/releng/syslinux/archiso_pxe_both_inc.cfg b/configs/releng/syslinux/archiso_pxe_both_inc.cfg new file mode 100644 index 0000000..1593303 --- /dev/null +++ b/configs/releng/syslinux/archiso_pxe_both_inc.cfg @@ -0,0 +1,4 @@ +INCLUDE boot/syslinux/archiso_head.cfg +INCLUDE boot/syslinux/archiso_pxe64.cfg +INCLUDE boot/syslinux/archiso_pxe32.cfg +INCLUDE boot/syslinux/archiso_tail.cfg diff --git a/configs/releng/syslinux/archiso_pxe_choose.cfg b/configs/releng/syslinux/archiso_pxe_choose.cfg new file mode 100644 index 0000000..6296065 --- /dev/null +++ b/configs/releng/syslinux/archiso_pxe_choose.cfg @@ -0,0 +1,11 @@ +DEFAULT choose + +LABEL choose +COM32 boot/syslinux/ifcpu64.c32 +APPEND have64 -- nohave64 + +LABEL have64 +CONFIG boot/syslinux/archiso_pxe_both_inc.cfg + +LABEL nohave64 +CONFIG boot/syslinux/archiso_pxe_32_inc.cfg diff --git a/configs/releng/syslinux/archiso_pxe_inc.cfg b/configs/releng/syslinux/archiso_pxe_inc.cfg deleted file mode 100644 index b2b6887..0000000 --- a/configs/releng/syslinux/archiso_pxe_inc.cfg +++ /dev/null @@ -1,3 +0,0 @@ -INCLUDE boot/syslinux/archiso_head.cfg -INCLUDE boot/syslinux/archiso_pxe.cfg -INCLUDE boot/syslinux/archiso_tail.cfg diff --git a/configs/releng/syslinux/archiso_sys.cfg b/configs/releng/syslinux/archiso_sys.cfg deleted file mode 100644 index 35303db..0000000 --- a/configs/releng/syslinux/archiso_sys.cfg +++ /dev/null @@ -1,9 +0,0 @@ -LABEL arch -TEXT HELP -Boot the Arch Linux live medium. It allows you to install Arch Linux or -perform system maintenance. -ENDTEXT -MENU LABEL Boot Arch Linux -LINUX boot/%ARCH%/vmlinuz -INITRD boot/%ARCH%/archiso.img -APPEND archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% diff --git a/configs/releng/syslinux/archiso_sys32.cfg b/configs/releng/syslinux/archiso_sys32.cfg new file mode 100644 index 0000000..261579e --- /dev/null +++ b/configs/releng/syslinux/archiso_sys32.cfg @@ -0,0 +1,9 @@ +LABEL arch32 +TEXT HELP +Boot the Arch Linux (i686) live medium. It allows you to install Arch Linux or +perform system maintenance. +ENDTEXT +MENU LABEL Boot Arch Linux (i686) +LINUX boot/i686/vmlinuz +INITRD boot/i686/archiso.img +APPEND archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% diff --git a/configs/releng/syslinux/archiso_sys64.cfg b/configs/releng/syslinux/archiso_sys64.cfg new file mode 100644 index 0000000..eb89813 --- /dev/null +++ b/configs/releng/syslinux/archiso_sys64.cfg @@ -0,0 +1,9 @@ +LABEL arch64 +TEXT HELP +Boot the Arch Linux (x86_64) live medium. It allows you to install Arch Linux or +perform system maintenance. +ENDTEXT +MENU LABEL Boot Arch Linux (x86_64) +LINUX boot/x86_64/vmlinuz +INITRD boot/x86_64/archiso.img +APPEND archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% diff --git a/configs/releng/syslinux/archiso_sys_32_inc.cfg b/configs/releng/syslinux/archiso_sys_32_inc.cfg new file mode 100644 index 0000000..9e37093 --- /dev/null +++ b/configs/releng/syslinux/archiso_sys_32_inc.cfg @@ -0,0 +1,3 @@ +INCLUDE boot/syslinux/archiso_head.cfg +INCLUDE boot/syslinux/archiso_sys32.cfg +INCLUDE boot/syslinux/archiso_tail.cfg diff --git a/configs/releng/syslinux/archiso_sys_both_inc.cfg b/configs/releng/syslinux/archiso_sys_both_inc.cfg new file mode 100644 index 0000000..e885c40 --- /dev/null +++ b/configs/releng/syslinux/archiso_sys_both_inc.cfg @@ -0,0 +1,4 @@ +INCLUDE boot/syslinux/archiso_head.cfg +INCLUDE boot/syslinux/archiso_sys64.cfg +INCLUDE boot/syslinux/archiso_sys32.cfg +INCLUDE boot/syslinux/archiso_tail.cfg diff --git a/configs/releng/syslinux/archiso_sys_choose.cfg b/configs/releng/syslinux/archiso_sys_choose.cfg new file mode 100644 index 0000000..24c597a --- /dev/null +++ b/configs/releng/syslinux/archiso_sys_choose.cfg @@ -0,0 +1,11 @@ +DEFAULT choose + +LABEL choose +COM32 boot/syslinux/ifcpu64.c32 +APPEND have64 -- nohave64 + +LABEL have64 +CONFIG boot/syslinux/archiso_sys_both_inc.cfg + +LABEL nohave64 +CONFIG boot/syslinux/archiso_sys_32_inc.cfg diff --git a/configs/releng/syslinux/archiso_sys_inc.cfg b/configs/releng/syslinux/archiso_sys_inc.cfg deleted file mode 100644 index 56c6a17..0000000 --- a/configs/releng/syslinux/archiso_sys_inc.cfg +++ /dev/null @@ -1,3 +0,0 @@ -INCLUDE boot/syslinux/archiso_head.cfg -INCLUDE boot/syslinux/archiso_sys.cfg -INCLUDE boot/syslinux/archiso_tail.cfg -- 1.8.0.2