On Wed, 26 Jan 2011 12:42:05 -0500 pyther@pyther.net wrote:

The function now stores parameters into var kernel_parameters. The new function does not set the kernel name (vmlinuz). This must now be done in the bootloader configuration code. --- src/core/libs/lib-ui-interactive.sh | 134 +++++++++++++++++++---------------- 1 files changed, 74 insertions(+), 60 deletions(-)

diff --git a/src/core/libs/lib-ui-interactive.sh b/src/core/libs/lib-ui-interactive.sh index 829556a..0449d99 100644 --- a/src/core/libs/lib-ui-interactive.sh +++ b/src/core/libs/lib-ui-interactive.sh @@ -1048,76 +1048,27 @@ generate_grub_menulst() { # keep the file from being completely bogus [ "$grubdev" = "DEVICE NOT FOUND" ] && grubdev= if [ -z "$grubdev" ]; then - notify "Your root boot device could not be autodetected by setup. Ensure you adjust the 'root (hd0,0)' line in your GRUB config accordingly." - grubdev="(hd0,0)" - fi bogus whitespace change? you readd the same stuff again, but with less spaces. The convention in aif to use tabs for indentation, you can send fixes for that in a separate patch, let's keep this one just for logical changes.

- # remove default entries by truncating file at our little tag (#-*) - sed -i -e '/#-\*/q' $grubmenu

same remark for this one.

- - # find label or uuid of the root partition - case $PART_ACCESS in - label) - local _label="$(getlabel $_rootpart)" - if [ -n "${_label}" ]; then - _rootpart="/dev/disk/by-label/${_label}" - fi - ;; - uuid) - local _uuid="$(getuuid $_rootpart)" - if [ -n "${_uuid}" ]; then - _rootpart="/dev/disk/by-uuid/${_uuid}" - fi - ;; - esac + notify "Your root boot device could not be autodetected by setup. Ensure you adjust the 'root (hd0,0)' line in your GRUB config accordingly." + grubdev="(hd0,0)" + fi

- # handle dmraid/mdadm,lvm,dm_crypt etc. replace entries where needed automatically - kernel="kernel $subdir/vmlinuz26 root=${_rootpart} ro" - if get_anchestors_mount ';/;' - then - if echo "$ANSWER_DEVICES" | sed -n '1p' | grep -q 'dm_crypt$' && echo "$ANSWER_DEVICES" | sed -n '2p' | grep -q 'raw$' - then - debug 'FS' 'Grub kernel line? Found / on dm_crypt on raw' - raw_device=`echo "$ANSWER_DEVICES" | sed -n '2p' | cut -d ' ' -f1` - crypt_device=`echo "$ANSWER_DEVICES" | sed -n '1p' | cut -d ' ' -f1` - kernel="kernel $subdir/vmlinuz26 root=$crypt_device cryptdevice=$raw_device:`basename $crypt_device` ro" - elif echo "$ANSWER_DEVICES" | sed -n '1p' | grep -q 'lvm-lv$' && echo "$ANSWER_DEVICES" | sed -n '4p' | grep -q 'dm_crypt$' && echo "$ANSWER_DEVICES" | sed -n '5p' | grep -q 'raw$' - then - debug 'FS' 'Grub kernel line? Found / on lvm on dm_crypt on raw' - lv_device=`echo "$ANSWER_DEVICES" | sed -n '1p' | cut -d ' ' -f1` - crypt_device=`echo "$ANSWER_DEVICES" | sed -n '4p' | cut -d ' ' -f1` - raw_device=`echo "$ANSWER_DEVICES" | sed -n '5p' | cut -d ' ' -f1` - kernel="kernel $subdir/vmlinuz26 root=$lv_device cryptdevice=$raw_device:`basename $crypt_device` ro" - elif echo "$ANSWER_DEVICES" | sed -n '1p' | grep -q 'dm_crypt$' && echo "$ANSWER_DEVICES" | sed -n '2p' | grep -q 'lvm-lv$' && echo "$ANSWER_DEVICES" | sed -n '5p' | grep -q 'raw$' - then - debug 'FS' 'Grub kernel line? Found / on dm_crypt on lvm on raw' - crypt_device=`echo "$ANSWER_DEVICES" | sed -n '1p' | cut -d ' ' -f1` - lv_device=`echo "$ANSWER_DEVICES" | sed -n '2p' | cut -d ' ' -f1` - kernel="kernel $subdir/vmlinuz26 root=$crypt_device cryptdevice=$lv_device:`basename $crypt_device` ro" - elif echo "$ANSWER_DEVICES" | sed -n '1p' | grep -q 'raw$' - then - debug 'FS' 'Grub kernel line? Found / on raw' - elif echo "$ANSWER_DEVICES" | sed -n '1p' | grep -q 'lvm-lv$' && echo "$ANSWER_DEVICES" | sed -n '4p' | grep -q 'raw$' - then - debug 'FS' 'Grub kernel line? Found / on lvm on raw' - else - debug 'FS' 'Grub kernel line? Could not figure this one out' - show_warning "Disk setup detection" "Are you using some really fancy dm_crypt/lvm/softraid setup?\nI could not figure it out, so the kernel line will be the default: you'll probably need to edit it.\nPlease file a bug for this and supply all files from /tmp/aif/" - fi - else - show_warning "Disk setup detection" "Could not find out where your / is. Did you setup filesystems/blockdevices? manual/autoprepare? If yes, please file a bug and tell us about this" - fi - cat >>$grubmenu <

should be: get_kernel_parameters || return $?

+ + cat >>$grubmenu <

# (0) Arch Linux title Arch Linux root $grubdev -$kernel +kernel $subdir/vmlinuz26 $kernel_parameters initrd $subdir/kernel26.img

# (1) Arch Linux title Arch Linux Fallback root $grubdev -$kernel +kernel $subdir/vmlinuz26 $kernel_parameters initrd $subdir/kernel26-fallback.img

# (2) Windows @@ -1179,6 +1130,69 @@ EOF fi }

+get_kernel_parameters() +{ + get_device_with_mount '/' || return 1 + local _rootpart="$ANSWER_DEVICE" + + case "$PART_ACCESS" in + label) + local _label="$(getlabel $_rootpart)" + if [[ -n "${_label}" ]]; then + _rootpart="/dev/disk/by-label/${_label}" + fi + ;; + uuid) + local _uuid="$(getuuid $_rootpart)" + if [[ -n "${_uuid}" ]]; then + _rootpart="/dev/disk/by-uuid/${_uuid}" + fi + ;; + esac + + kernel_parameters="root=$_rootpart ro" + + # No seperate /boot partition + if [[ -z "$bootdev" ]]; then + subdir='/boot' + fi + + if get_anchestors_mount ';/;' + then + if echo "$ANSWER_DEVICES" | sed -n '1p' | grep -q 'dm_crypt$' && echo "$ANSWER_DEVICES" | sed -n '2p' | grep -q 'raw$' + then + debun 'FS' 'get_kernel_options - Found / on dm_crypt on raw' + raw_device="$(echo "$ANSWER_DEVICES" | sed -n '2p' | cut -d ' ' -f1)" + crypt_device="$(echo "$ANSWER_DEVICES" | sed -n '1p' | cut -d ' ' -f1)" + kernel_parameters="root=$crypt_device cryptdevice=$raw_device:`basename $crypt_device` ro" + elif echo "$ANSWER_DEVICES" | sed -n '1p' | grep -q 'lvm-lv$' && echo "$ANSWER_DEVICES" | sed -n '4p' | grep -q 'dm_crypt$' && echo "$ANSWER_DEVICES" | sed -n '5p' | grep -q 'raw$' + then + debug 'FS' 'get_kernel_options - Found / on lvm on dm_crypt on raw' + lv_device="$(echo "$ANSWER_DEVICES" | sed -n '1p' | cut -d ' ' -f1)" + crypt_device="$(echo "$ANSWER_DEVICES" | sed -n '4p' | cut -d ' ' -f1)" + raw_device="$(echo "$ANSWER_DEVICES" | sed -n '5p' | cut -d ' ' -f1)" + kernel_parameters="root=$lv_device cryptdevice=$raw_device:`basename $crypt_device` ro" + elif echo "$ANSWER_DEVICES" | sed -n '1p' | grep -q 'dm_crypt$' && echo "$ANSWER_DEVICES" | sed -n '2p' | grep -q 'lvm-lv$' && echo "$ANSWER_DEVICES" | sed -n '5p' | grep -q 'raw$' + then + debug 'FS' 'get_kernel_options - Found / on dm_crypt on lvm on raw' + crypt_device="$(echo "$ANSWER_DEVICES" | sed -n '1p' | cut -d ' ' -f1)" + lv_device="$(echo "$ANSWER_DEVICES" | sed -n '2p' | cut -d ' ' -f1)" + kernel_parameters="root=$crypt_device cryptdevice=$lv_device:`basename $crypt_device` ro" + elif echo "$ANSWER_DEVICES" | sed -n '1p' | grep -q 'raw$' + then + debug 'FS' 'get_kernel_parameters - Found / on raw' + elif echo "$ANSWER_DEVICES" | sed -n '1p' | grep -q 'lvm-lv$' && echo "$ANSWER_DEVICES" | sed -n '4p' | grep -q 'raw$' + then + debug 'FS' 'get_kernel_parameters - Found / on lvm on raw' + else + debug 'FS' 'get_kernel_parameters - Could not figure this one out' + show_warning "Disk setup detection" "Are you using some really fancy dm_crypt/lvm/softraid setup?\nI could not figure it out, so the kernel line will be the default: you'll probably need to edit it.\nPlease file a bug for this and supply all files from /tmp/aif/" + fi + else + show_warning "Disk setup detection" "Could not find out where your / is. Did you setup filesystems/blockdevices? manual/autoprepare? If yes, please file a bug and tell us about this"

let's return 1 here. inability to set $kernel_parameters means inability to configure bootloader.

+ fi +} +

# displays installation source selection menu # and sets up relevant config files