Add basic tests for the Git interface. The test suite is based on sharness. Signed-off-by: Lukas Fleischer <lfleischer@archlinux.org> --- git-interface/test/Makefile | 11 + git-interface/test/setup.sh | 121 ++++++ git-interface/test/sharness.sh | 851 +++++++++++++++++++++++++++++++++++++ git-interface/test/t0001-auth.sh | 19 + git-interface/test/t0002-serve.sh | 26 ++ git-interface/test/t0003-update.sh | 20 + 6 files changed, 1048 insertions(+) create mode 100644 git-interface/test/Makefile create mode 100644 git-interface/test/setup.sh create mode 100644 git-interface/test/sharness.sh create mode 100755 git-interface/test/t0001-auth.sh create mode 100755 git-interface/test/t0002-serve.sh create mode 100755 git-interface/test/t0003-update.sh diff --git a/git-interface/test/Makefile b/git-interface/test/Makefile new file mode 100644 index 0000000..d6f0f74 --- /dev/null +++ b/git-interface/test/Makefile @@ -0,0 +1,11 @@ +T = $(sort $(wildcard t[0-9][0-9][0-9][0-9]-*.sh)) + +check: $(T) + +clean: + $(RM) -r test-results/ + +$(T): + @echo "*** $@ ***"; $(SHELL) $@ + +.PHONY: check clean $(T) diff --git a/git-interface/test/setup.sh b/git-interface/test/setup.sh new file mode 100644 index 0000000..eecb4d5 --- /dev/null +++ b/git-interface/test/setup.sh @@ -0,0 +1,121 @@ +TEST_DIRECTORY="$(pwd)" + +. ./sharness.sh + +# Configure paths to the Git interface scripts. +GIT_AUTH="$TEST_DIRECTORY/../git-auth.py" +GIT_SERVE="$TEST_DIRECTORY/../git-serve.py" +GIT_UPDATE="$TEST_DIRECTORY/../git-update.py" + +# Create the configuration file and a dummy notification script. +cat >config <<-EOF +[database] +backend = sqlite +name = aur.db + +[options] +enable-maintenance = 0 +maintenance-exceptions = 127.0.0.1 + +[notifications] +notify-cmd = ./notify.sh + +[auth] +valid-keytypes = ssh-rsa ssh-dss ecdsa-sha2-nistp256 ecdsa-sha2-nistp384 ecdsa-sha2-nistp521 ssh-ed25519 +username-regex = [a-zA-Z0-9]+[.\-_]?[a-zA-Z0-9]+$ +git-serve-cmd = /srv/http/aurweb/git-interface/git-serve.py +ssh-options = restrict + +[serve] +repo-path = ./aur.git/ +repo-regex = [a-z0-9][a-z0-9.+_-]*$ +git-shell-cmd = /usr/bin/git-shell +git-update-cmd = /srv/http/aurweb/git-interface/git-update.py +ssh-cmdline = ssh aur@aur.archlinux.org + +[update] +max-blob-size = 256000 +EOF + +cat >notify.sh <<-EOF +#!/bin/sh +EOF +chmod +x notify.sh + +AUR_CONFIG=config +export AUR_CONFIG + +# Create SSH public keys which will be used by the test users later. +AUTH_KEYTYPE_USER=ssh-rsa +AUTH_KEYTEXT_USER=AAAAB3NzaC1yc2EAAAADAQABAAABAQCeUafDK4jqUiRHNQfwHcYjBKLZ4Rc1sNUofHApBP6j91nIvDHZe2VUqeBmFUhBz7kXK4VbXD9nlHMun2HeshL8hXnMzymZ8Wk7+IKefj61pajJkIdttw9Tnayfg7uhg5RbFy9zpEjmGjnIVjSzOXKCwppNT+CNujpKM5FD8gso/Z+l3fD+IwrPwS1SzF1Z99nqI9n2FM/JWZqluvTqnW9WdAvBDfutXxp0R5ZiLI5TAKL2Ssp5rpL70pkLXhv+9sK545zKKlXUFmw6Pi2iVBdqdRsk9ocl49dLiNIh8CYDCO3CRQn+8EnpBhTor2TKQxGJI3mzoBwWJJxoKhD/XlYJ +AUTH_FINGERPRINT_USER=SHA256:F/OFtYAy0JCytAGUi4RUZnOsThhQtFMK7fH1YvFBCpo + +AUTH_KEYTYPE_TU=ssh-rsa +AUTH_KEYTEXT_TU=AAAAB3NzaC1yc2EAAAADAQABAAABAQC4Q2Beg6jf2r1LZ4vwT5y10dK8+/c5RaNyTwv77wF2OSLXh32xW0ovhE2lW2gqoakdGsxgM2fTtqMTl29WOsAxlGF7x9XbWhFXFUT88Daq1fAeuihkiRjfBbInSW/WcrFZ+biLBch67addtfkkd4PmAafDeeCtszAXqza+ltBG1oxAGiTXgI3LOhA1/GtLLxsi5sPUO3ZlhvwDn4Sy0aXYx8l9hop/PU4Cjn82hyRa9r+SRxQ3KtjKxcVMnZ8IyXOrBwXTukgSBR/6nSdEmO0JPkYUFuNwh3UGFKuNkrPguL5T+4YDym6czYmZJzQ7NNl2pLKYmYgBwBe5rORlWfN5 +AUTH_FINGERPRINT_TU=SHA256:xQGC6j/U1Q3NDXLl04pm+Shr1mjYUXbGMUzlm9vby4k + +# Initialize the test database. +rm -f aur.db +sed \ + -e '/^DROP DATABASE /d' \ + -e '/^CREATE DATABASE /d' \ + -e '/^USE /d' \ + -e 's/ ENGINE = InnoDB//' \ + -e 's/ [A-Z]* UNSIGNED NOT NULL AUTO_INCREMENT/ INTEGER NOT NULL/' \ + -e 's/([0-9, ]*) UNSIGNED / UNSIGNED /' \ + "$TEST_DIRECTORY/../../schema/aur-schema.sql" | sqlite3 aur.db + +echo "INSERT INTO Users (ID, UserName, Passwd, Email, AccountTypeID) VALUES (1, 'user', '!', 'user@localhost', 1);" | sqlite3 aur.db +echo "INSERT INTO Users (ID, UserName, Passwd, Email, AccountTypeID) VALUES (2, 'tu', '!', 'tu@localhost', 2);" | sqlite3 aur.db + +echo "INSERT INTO SSHPubKeys (UserID, Fingerprint, PubKey) VALUES (1, '$AUTH_FINGERPRINT_USER', '$AUTH_KEYTYPE_USER $AUTH_KEYTEXT_USER');" | sqlite3 aur.db +echo "INSERT INTO SSHPubKeys (UserID, Fingerprint, PubKey) VALUES (2, '$AUTH_FINGERPRINT_TU', '$AUTH_KEYTYPE_TU $AUTH_KEYTEXT_TU');" | sqlite3 aur.db + +# Initialize a Git repository to store test packages in. +( + GIT_AUTHOR_EMAIL=author@example.com + GIT_AUTHOR_NAME='A U Thor' + GIT_COMMITTER_EMAIL=committer@example.com + GIT_COMMITTER_NAME='C O Mitter' + export GIT_AUTHOR_EMAIL GIT_AUTHOR_NAME + export GIT_COMMITTER_EMAIL GIT_COMMITTER_NAME + + mkdir aur.git + cd aur.git + + git init -q + git checkout -q -b refs/namespaces/foobar/refs/heads/master + + cat >PKGBUILD <<-EOF + pkgname=foobar + pkgver=1 + pkgrel=1 + pkgdesc='aurweb test package.' + url='https://aur.archlinux.org/' + license=('GPL') + arch=('any') + depends=('python-pygit2') + source=() + md5sums=() + + package() { + echo 'Hello world!' + } + EOF + + cat >.SRCINFO <<-EOF + pkgbase = foobar + pkgdesc = aurweb test package. + pkgver = 1 + pkgrel = 1 + url = https://aur.archlinux.org/ + arch = any + license = GPL + depends = python-pygit2 + + pkgname = foobar + EOF + + git add PKGBUILD .SRCINFO + git commit -q -am 'Initial import' +) diff --git a/git-interface/test/sharness.sh b/git-interface/test/sharness.sh new file mode 100644 index 0000000..1d57ce9 --- /dev/null +++ b/git-interface/test/sharness.sh @@ -0,0 +1,851 @@ +#!/bin/sh +# +# Copyright (c) 2011-2012 Mathias Lafeldt +# Copyright (c) 2005-2012 Git project +# Copyright (c) 2005-2012 Junio C Hamano +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see http://www.gnu.org/licenses/ . + +# Public: Current version of Sharness. +SHARNESS_VERSION="1.0.0" +export SHARNESS_VERSION + +# Public: The file extension for tests. By default, it is set to "t". +: ${SHARNESS_TEST_EXTENSION:=t} +export SHARNESS_TEST_EXTENSION + +# Reset TERM to original terminal if found, otherwise save orignal TERM +[ "x" = "x$SHARNESS_ORIG_TERM" ] && + SHARNESS_ORIG_TERM="$TERM" || + TERM="$SHARNESS_ORIG_TERM" +# Public: The unsanitized TERM under which sharness is originally run +export SHARNESS_ORIG_TERM + +# Export SHELL_PATH +: ${SHELL_PATH:=$SHELL} +export SHELL_PATH + +# For repeatability, reset the environment to a known state. +# TERM is sanitized below, after saving color control sequences. +LANG=C +LC_ALL=C +PAGER=cat +TZ=UTC +EDITOR=: +export LANG LC_ALL PAGER TZ EDITOR +unset VISUAL CDPATH GREP_OPTIONS + +# Line feed +LF=' +' + +[ "x$TERM" != "xdumb" ] && ( + [ -t 1 ] && + tput bold >/dev/null 2>&1 && + tput setaf 1 >/dev/null 2>&1 && + tput sgr0 >/dev/null 2>&1 + ) && + color=t + +while test "$#" -ne 0; do + case "$1" in + -d|--d|--de|--deb|--debu|--debug) + debug=t; shift ;; + -i|--i|--im|--imm|--imme|--immed|--immedi|--immedia|--immediat|--immediate) + immediate=t; shift ;; + -l|--l|--lo|--lon|--long|--long-|--long-t|--long-te|--long-tes|--long-test|--long-tests) + TEST_LONG=t; export TEST_LONG; shift ;; + --in|--int|--inte|--inter|--intera|--interac|--interact|--interacti|--interactiv|--interactive|--interactive-|--interactive-t|--interactive-te|--interactive-tes|--interactive-test|--interactive-tests): + TEST_INTERACTIVE=t; export TEST_INTERACTIVE; verbose=t; shift ;; + -h|--h|--he|--hel|--help) + help=t; shift ;; + -v|--v|--ve|--ver|--verb|--verbo|--verbos|--verbose) + verbose=t; shift ;; + -q|--q|--qu|--qui|--quie|--quiet) + # Ignore --quiet under a TAP::Harness. Saying how many tests + # passed without the ok/not ok details is always an error. + test -z "$HARNESS_ACTIVE" && quiet=t; shift ;; + --chain-lint) + chain_lint=t; shift ;; + --no-chain-lint) + chain_lint=; shift ;; + --no-color) + color=; shift ;; + --root=*) + root=$(expr "z$1" : 'z[^=]*=\(.*\)') + shift ;; + *) + echo "error: unknown test option '$1'" >&2; exit 1 ;; + esac +done + +if test -n "$color"; then + # Save the color control sequences now rather than run tput + # each time say_color() is called. This is done for two + # reasons: + # * TERM will be changed to dumb + # * HOME will be changed to a temporary directory and tput + # might need to read ~/.terminfo from the original HOME + # directory to get the control sequences + # Note: This approach assumes the control sequences don't end + # in a newline for any terminal of interest (command + # substitutions strip trailing newlines). Given that most + # (all?) terminals in common use are related to ECMA-48, this + # shouldn't be a problem. + say_color_error=$(tput bold; tput setaf 1) # bold red + say_color_skip=$(tput setaf 4) # blue + say_color_warn=$(tput setaf 3) # brown/yellow + say_color_pass=$(tput setaf 2) # green + say_color_info=$(tput setaf 6) # cyan + say_color_reset=$(tput sgr0) + say_color_="" # no formatting for normal text + say_color() { + test -z "$1" && test -n "$quiet" && return + eval "say_color_color=\$say_color_$1" + shift + printf "%s\\n" "$say_color_color$*$say_color_reset" + } +else + say_color() { + test -z "$1" && test -n "$quiet" && return + shift + printf "%s\n" "$*" + } +fi + +TERM=dumb +export TERM + +error() { + say_color error "error: $*" + EXIT_OK=t + exit 1 +} + +say() { + say_color info "$*" +} + +test -n "$test_description" || error "Test script did not set test_description." + +if test "$help" = "t"; then + echo "$test_description" + exit 0 +fi + +exec 5>&1 +exec 6<&0 +if test "$verbose" = "t"; then + exec 4>&2 3>&1 +else + exec 4>/dev/null 3>/dev/null +fi + +test_failure=0 +test_count=0 +test_fixed=0 +test_broken=0 +test_success=0 + +die() { + code=$? + if test -n "$EXIT_OK"; then + exit $code + else + echo >&5 "FATAL: Unexpected exit with code $code" + exit 1 + fi +} + +EXIT_OK= +trap 'die' EXIT + +# Public: Define that a test prerequisite is available. +# +# The prerequisite can later be checked explicitly using test_have_prereq or +# implicitly by specifying the prerequisite name in calls to test_expect_success +# or test_expect_failure. +# +# $1 - Name of prerequiste (a simple word, in all capital letters by convention) +# +# Examples +# +# # Set PYTHON prerequisite if interpreter is available. +# command -v python >/dev/null && test_set_prereq PYTHON +# +# # Set prerequisite depending on some variable. +# test -z "$NO_GETTEXT" && test_set_prereq GETTEXT +# +# Returns nothing. +test_set_prereq() { + satisfied_prereq="$satisfied_prereq$1 " +} +satisfied_prereq=" " + +# Public: Check if one or more test prerequisites are defined. +# +# The prerequisites must have previously been set with test_set_prereq. +# The most common use of this is to skip all the tests if some essential +# prerequisite is missing. +# +# $1 - Comma-separated list of test prerequisites. +# +# Examples +# +# # Skip all remaining tests if prerequisite is not set. +# if ! test_have_prereq PERL; then +# skip_all='skipping perl interface tests, perl not available' +# test_done +# fi +# +# Returns 0 if all prerequisites are defined or 1 otherwise. +test_have_prereq() { + # prerequisites can be concatenated with ',' + save_IFS=$IFS + IFS=, + set -- $* + IFS=$save_IFS + + total_prereq=0 + ok_prereq=0 + missing_prereq= + + for prerequisite; do + case "$prerequisite" in + !*) + negative_prereq=t + prerequisite=${prerequisite#!} + ;; + *) + negative_prereq= + esac + + total_prereq=$(($total_prereq + 1)) + case "$satisfied_prereq" in + *" $prerequisite "*) + satisfied_this_prereq=t + ;; + *) + satisfied_this_prereq= + esac + + case "$satisfied_this_prereq,$negative_prereq" in + t,|,t) + ok_prereq=$(($ok_prereq + 1)) + ;; + *) + # Keep a list of missing prerequisites; restore + # the negative marker if necessary. + prerequisite=${negative_prereq:+!}$prerequisite + if test -z "$missing_prereq"; then + missing_prereq=$prerequisite + else + missing_prereq="$prerequisite,$missing_prereq" + fi + esac + done + + test $total_prereq = $ok_prereq +} + +# You are not expected to call test_ok_ and test_failure_ directly, use +# the text_expect_* functions instead. + +test_ok_() { + test_success=$(($test_success + 1)) + say_color "" "ok $test_count - $@" +} + +test_failure_() { + test_failure=$(($test_failure + 1)) + say_color error "not ok $test_count - $1" + shift + echo "$@" | sed -e 's/^/# /' + test "$immediate" = "" || { EXIT_OK=t; exit 1; } +} + +test_known_broken_ok_() { + test_fixed=$(($test_fixed + 1)) + say_color error "ok $test_count - $@ # TODO known breakage vanished" +} + +test_known_broken_failure_() { + test_broken=$(($test_broken + 1)) + say_color warn "not ok $test_count - $@ # TODO known breakage" +} + +# Public: Execute commands in debug mode. +# +# Takes a single argument and evaluates it only when the test script is started +# with --debug. This is primarily meant for use during the development of test +# scripts. +# +# $1 - Commands to be executed. +# +# Examples +# +# test_debug "cat some_log_file" +# +# Returns the exit code of the last command executed in debug mode or 0 +# otherwise. +test_debug() { + test "$debug" = "" || eval "$1" +} + +# Public: Stop execution and start a shell. +# +# This is useful for debugging tests and only makes sense together with "-v". +# Be sure to remove all invocations of this command before submitting. +test_pause() { + if test "$verbose" = t; then + "$SHELL_PATH" <&6 >&3 2>&4 + else + error >&5 "test_pause requires --verbose" + fi +} + +test_eval_() { + # This is a separate function because some tests use + # "return" to end a test_expect_success block early. + case ",$test_prereq," in + *,INTERACTIVE,*) + eval "$*" + ;; + *) + eval </dev/null >&3 2>&4 "$*" + ;; + esac +} + +test_run_() { + test_cleanup=: + expecting_failure=$2 + test_eval_ "$1" + eval_ret=$? + + if test "$chain_lint" = "t"; then + test_eval_ "(exit 117) && $1" + if test "$?" != 117; then + error "bug in the test script: broken &&-chain: $1" + fi + fi + + if test -z "$immediate" || test $eval_ret = 0 || test -n "$expecting_failure"; then + test_eval_ "$test_cleanup" + fi + if test "$verbose" = "t" && test -n "$HARNESS_ACTIVE"; then + echo "" + fi + return "$eval_ret" +} + +test_skip_() { + test_count=$(($test_count + 1)) + to_skip= + for skp in $SKIP_TESTS; do + case $this_test.$test_count in + $skp) + to_skip=t + break + esac + done + if test -z "$to_skip" && test -n "$test_prereq" && ! test_have_prereq "$test_prereq"; then + to_skip=t + fi + case "$to_skip" in + t) + of_prereq= + if test "$missing_prereq" != "$test_prereq"; then + of_prereq=" of $test_prereq" + fi + + say_color skip >&3 "skipping test: $@" + say_color skip "ok $test_count # skip $1 (missing $missing_prereq${of_prereq})" + : true + ;; + *) + false + ;; + esac +} + +# Public: Run test commands and expect them to succeed. +# +# When the test passed, an "ok" message is printed and the number of successful +# tests is incremented. When it failed, a "not ok" message is printed and the +# number of failed tests is incremented. +# +# With --immediate, exit test immediately upon the first failed test. +# +# Usually takes two arguments: +# $1 - Test description +# $2 - Commands to be executed. +# +# With three arguments, the first will be taken to be a prerequisite: +# $1 - Comma-separated list of test prerequisites. The test will be skipped if +# not all of the given prerequisites are set. To negate a prerequisite, +# put a "!" in front of it. +# $2 - Test description +# $3 - Commands to be executed. +# +# Examples +# +# test_expect_success \ +# 'git-write-tree should be able to write an empty tree.' \ +# 'tree=$(git-write-tree)' +# +# # Test depending on one prerequisite. +# test_expect_success TTY 'git --paginate rev-list uses a pager' \ +# ' ... ' +# +# # Multiple prerequisites are separated by a comma. +# test_expect_success PERL,PYTHON 'yo dawg' \ +# ' test $(perl -E 'print eval "1 +" . qx[python -c "print 2"]') == "4" ' +# +# Returns nothing. +test_expect_success() { + test "$#" = 3 && { test_prereq=$1; shift; } || test_prereq= + test "$#" = 2 || error "bug in the test script: not 2 or 3 parameters to test_expect_success" + export test_prereq + if ! test_skip_ "$@"; then + say >&3 "expecting success: $2" + if test_run_ "$2"; then + test_ok_ "$1" + else + test_failure_ "$@" + fi + fi + echo >&3 "" +} + +# Public: Run test commands and expect them to fail. Used to demonstrate a known +# breakage. +# +# This is NOT the opposite of test_expect_success, but rather used to mark a +# test that demonstrates a known breakage. +# +# When the test passed, an "ok" message is printed and the number of fixed tests +# is incremented. When it failed, a "not ok" message is printed and the number +# of tests still broken is incremented. +# +# Failures from these tests won't cause --immediate to stop. +# +# Usually takes two arguments: +# $1 - Test description +# $2 - Commands to be executed. +# +# With three arguments, the first will be taken to be a prerequisite: +# $1 - Comma-separated list of test prerequisites. The test will be skipped if +# not all of the given prerequisites are set. To negate a prerequisite, +# put a "!" in front of it. +# $2 - Test description +# $3 - Commands to be executed. +# +# Returns nothing. +test_expect_failure() { + test "$#" = 3 && { test_prereq=$1; shift; } || test_prereq= + test "$#" = 2 || error "bug in the test script: not 2 or 3 parameters to test_expect_failure" + export test_prereq + if ! test_skip_ "$@"; then + say >&3 "checking known breakage: $2" + if test_run_ "$2" expecting_failure; then + test_known_broken_ok_ "$1" + else + test_known_broken_failure_ "$1" + fi + fi + echo >&3 "" +} + +# Public: Run command and ensure that it fails in a controlled way. +# +# Use it instead of "! <command>". For example, when <command> dies due to a +# segfault, test_must_fail diagnoses it as an error, while "! <command>" would +# mistakenly be treated as just another expected failure. +# +# This is one of the prefix functions to be used inside test_expect_success or +# test_expect_failure. +# +# $1.. - Command to be executed. +# +# Examples +# +# test_expect_success 'complain and die' ' +# do something && +# do something else && +# test_must_fail git checkout ../outerspace +# ' +# +# Returns 1 if the command succeeded (exit code 0). +# Returns 1 if the command died by signal (exit codes 130-192) +# Returns 1 if the command could not be found (exit code 127). +# Returns 0 otherwise. +test_must_fail() { + "$@" + exit_code=$? + if test $exit_code = 0; then + echo >&2 "test_must_fail: command succeeded: $*" + return 1 + elif test $exit_code -gt 129 -a $exit_code -le 192; then + echo >&2 "test_must_fail: died by signal: $*" + return 1 + elif test $exit_code = 127; then + echo >&2 "test_must_fail: command not found: $*" + return 1 + fi + return 0 +} + +# Public: Run command and ensure that it succeeds or fails in a controlled way. +# +# Similar to test_must_fail, but tolerates success too. Use it instead of +# "<command> || :" to catch failures caused by a segfault, for instance. +# +# This is one of the prefix functions to be used inside test_expect_success or +# test_expect_failure. +# +# $1.. - Command to be executed. +# +# Examples +# +# test_expect_success 'some command works without configuration' ' +# test_might_fail git config --unset all.configuration && +# do something +# ' +# +# Returns 1 if the command died by signal (exit codes 130-192) +# Returns 1 if the command could not be found (exit code 127). +# Returns 0 otherwise. +test_might_fail() { + "$@" + exit_code=$? + if test $exit_code -gt 129 -a $exit_code -le 192; then + echo >&2 "test_might_fail: died by signal: $*" + return 1 + elif test $exit_code = 127; then + echo >&2 "test_might_fail: command not found: $*" + return 1 + fi + return 0 +} + +# Public: Run command and ensure it exits with a given exit code. +# +# This is one of the prefix functions to be used inside test_expect_success or +# test_expect_failure. +# +# $1 - Expected exit code. +# $2.. - Command to be executed. +# +# Examples +# +# test_expect_success 'Merge with d/f conflicts' ' +# test_expect_code 1 git merge "merge msg" B master +# ' +# +# Returns 0 if the expected exit code is returned or 1 otherwise. +test_expect_code() { + want_code=$1 + shift + "$@" + exit_code=$? + if test $exit_code = $want_code; then + return 0 + fi + + echo >&2 "test_expect_code: command exited with $exit_code, we wanted $want_code $*" + return 1 +} + +# Public: Compare two files to see if expected output matches actual output. +# +# The TEST_CMP variable defines the command used for the comparision; it +# defaults to "diff -u". Only when the test script was started with --verbose, +# will the command's output, the diff, be printed to the standard output. +# +# This is one of the prefix functions to be used inside test_expect_success or +# test_expect_failure. +# +# $1 - Path to file with expected output. +# $2 - Path to file with actual output. +# +# Examples +# +# test_expect_success 'foo works' ' +# echo expected >expected && +# foo >actual && +# test_cmp expected actual +# ' +# +# Returns the exit code of the command set by TEST_CMP. +test_cmp() { + ${TEST_CMP:-diff -u} "$@" +} + +# Public: portably print a sequence of numbers. +# +# seq is not in POSIX and GNU seq might not be available everywhere, +# so it is nice to have a seq implementation, even a very simple one. +# +# $1 - Starting number. +# $2 - Ending number. +# +# Examples +# +# test_expect_success 'foo works 10 times' ' +# for i in $(test_seq 1 10) +# do +# foo || return +# done +# ' +# +# Returns 0 if all the specified numbers can be displayed. +test_seq() { + i="$1" + j="$2" + while test "$i" -le "$j" + do + echo "$i" || return + i=$(expr "$i" + 1) + done +} + +# Public: Check if the file expected to be empty is indeed empty, and barfs +# otherwise. +# +# $1 - File to check for emptyness. +# +# Returns 0 if file is empty, 1 otherwise. +test_must_be_empty() { + if test -s "$1" + then + echo "'$1' is not empty, it contains:" + cat "$1" + return 1 + fi +} + +# Public: Schedule cleanup commands to be run unconditionally at the end of a +# test. +# +# If some cleanup command fails, the test will not pass. With --immediate, no +# cleanup is done to help diagnose what went wrong. +# +# This is one of the prefix functions to be used inside test_expect_success or +# test_expect_failure. +# +# $1.. - Commands to prepend to the list of cleanup commands. +# +# Examples +# +# test_expect_success 'test core.capslock' ' +# git config core.capslock true && +# test_when_finished "git config --unset core.capslock" && +# do_something +# ' +# +# Returns the exit code of the last cleanup command executed. +test_when_finished() { + test_cleanup="{ $* + } && (exit \"\$eval_ret\"); eval_ret=\$?; $test_cleanup" +} + +# Public: Schedule cleanup commands to be run unconditionally when all tests +# have run. +# +# This can be used to clean up things like test databases. It is not needed to +# clean up temporary files, as test_done already does that. +# +# Examples: +# +# cleanup mysql -e "DROP DATABASE mytest" +# +# Returns the exit code of the last cleanup command executed. +final_cleanup= +cleanup() { + final_cleanup="{ $* + } && (exit \"\$eval_ret\"); eval_ret=\$?; $final_cleanup" +} + +# Public: Summarize test results and exit with an appropriate error code. +# +# Must be called at the end of each test script. +# +# Can also be used to stop tests early and skip all remaining tests. For this, +# set skip_all to a string explaining why the tests were skipped before calling +# test_done. +# +# Examples +# +# # Each test script must call test_done at the end. +# test_done +# +# # Skip all remaining tests if prerequisite is not set. +# if ! test_have_prereq PERL; then +# skip_all='skipping perl interface tests, perl not available' +# test_done +# fi +# +# Returns 0 if all tests passed or 1 if there was a failure. +test_done() { + EXIT_OK=t + + if test -z "$HARNESS_ACTIVE"; then + test_results_dir="$SHARNESS_TEST_DIRECTORY/test-results" + mkdir -p "$test_results_dir" + test_results_path="$test_results_dir/$this_test.$$.counts" + + cat >>"$test_results_path" <<-EOF + total $test_count + success $test_success + fixed $test_fixed + broken $test_broken + failed $test_failure + + EOF + fi + + if test "$test_fixed" != 0; then + say_color error "# $test_fixed known breakage(s) vanished; please update test(s)" + fi + if test "$test_broken" != 0; then + say_color warn "# still have $test_broken known breakage(s)" + fi + if test "$test_broken" != 0 || test "$test_fixed" != 0; then + test_remaining=$(( $test_count - $test_broken - $test_fixed )) + msg="remaining $test_remaining test(s)" + else + test_remaining=$test_count + msg="$test_count test(s)" + fi + + case "$test_failure" in + 0) + # Maybe print SKIP message + if test -n "$skip_all" && test $test_count -gt 0; then + error "Can't use skip_all after running some tests" + fi + [ -z "$skip_all" ] || skip_all=" # SKIP $skip_all" + + if test $test_remaining -gt 0; then + say_color pass "# passed all $msg" + fi + say "1..$test_count$skip_all" + + test_eval_ "$final_cleanup" + + test -d "$remove_trash" && + cd "$(dirname "$remove_trash")" && + rm -rf "$(basename "$remove_trash")" + + exit 0 ;; + + *) + say_color error "# failed $test_failure among $msg" + say "1..$test_count" + + exit 1 ;; + + esac +} + +# Public: Root directory containing tests. Tests can override this variable, +# e.g. for testing Sharness itself. +: ${SHARNESS_TEST_DIRECTORY:=$(pwd)} +export SHARNESS_TEST_DIRECTORY + +# Public: Source directory of test code and sharness library. +# This directory may be different from the directory in which tests are +# being run. +: ${SHARNESS_TEST_SRCDIR:=$(cd $(dirname $0) && pwd)} +export SHARNESS_TEST_SRCDIR + +# Public: Build directory that will be added to PATH. By default, it is set to +# the parent directory of SHARNESS_TEST_DIRECTORY. +: ${SHARNESS_BUILD_DIRECTORY:="$SHARNESS_TEST_DIRECTORY/.."} +PATH="$SHARNESS_BUILD_DIRECTORY:$PATH" +export PATH SHARNESS_BUILD_DIRECTORY + +# Public: Path to test script currently executed. +SHARNESS_TEST_FILE="$0" +export SHARNESS_TEST_FILE + +# Prepare test area. +SHARNESS_TRASH_DIRECTORY="trash directory.$(basename "$SHARNESS_TEST_FILE" ".$SHARNESS_TEST_EXTENSION")" +test -n "$root" && SHARNESS_TRASH_DIRECTORY="$root/$SHARNESS_TRASH_DIRECTORY" +case "$SHARNESS_TRASH_DIRECTORY" in +/*) ;; # absolute path is good + *) SHARNESS_TRASH_DIRECTORY="$SHARNESS_TEST_DIRECTORY/$SHARNESS_TRASH_DIRECTORY" ;; +esac +test "$debug" = "t" || remove_trash="$SHARNESS_TRASH_DIRECTORY" +rm -rf "$SHARNESS_TRASH_DIRECTORY" || { + EXIT_OK=t + echo >&5 "FATAL: Cannot prepare test area" + exit 1 +} + + +# +# Load any extensions in $srcdir/sharness.d/*.sh +# +if test -d "${SHARNESS_TEST_SRCDIR}/sharness.d" +then + for file in "${SHARNESS_TEST_SRCDIR}"/sharness.d/*.sh + do + # Ensure glob was not an empty match: + test -e "${file}" || break + + if test -n "$debug" + then + echo >&5 "sharness: loading extensions from ${file}" + fi + . "${file}" + if test $? != 0 + then + echo >&5 "sharness: Error loading ${file}. Aborting." + exit 1 + fi + done +fi + +# Public: Empty trash directory, the test area, provided for each test. The HOME +# variable is set to that directory too. +export SHARNESS_TRASH_DIRECTORY + +HOME="$SHARNESS_TRASH_DIRECTORY" +export HOME + +mkdir -p "$SHARNESS_TRASH_DIRECTORY" || exit 1 +# Use -P to resolve symlinks in our working directory so that the cwd +# in subprocesses like git equals our $PWD (for pathname comparisons). +cd -P "$SHARNESS_TRASH_DIRECTORY" || exit 1 + +this_test=${SHARNESS_TEST_FILE##*/} +this_test=${this_test%.$SHARNESS_TEST_EXTENSION} +for skp in $SKIP_TESTS; do + case "$this_test" in + $skp) + say_color info >&3 "skipping test $this_test altogether" + skip_all="skip all tests in $this_test" + test_done + esac +done + +test -n "$TEST_LONG" && test_set_prereq EXPENSIVE +test -n "$TEST_INTERACTIVE" && test_set_prereq INTERACTIVE + +# Make sure this script ends with code 0 +: + +# vi: set ts=4 sw=4 noet : diff --git a/git-interface/test/t0001-auth.sh b/git-interface/test/t0001-auth.sh new file mode 100755 index 0000000..50ef510 --- /dev/null +++ b/git-interface/test/t0001-auth.sh @@ -0,0 +1,19 @@ +#!/bin/sh + +test_description='git-auth tests' + +. ./setup.sh + +test_expect_success 'Test basic authentication.' ' + "$GIT_AUTH" "$AUTH_KEYTYPE_USER" "$AUTH_KEYTEXT_USER" >out && + grep -q AUR_USER=user out && + grep -q AUR_PRIVILEGED=0 out +' + +test_expect_success 'Test Trusted User authentication.' ' + "$GIT_AUTH" "$AUTH_KEYTYPE_TU" "$AUTH_KEYTEXT_TU" >out && + grep -q AUR_USER=tu out && + grep -q AUR_PRIVILEGED=1 out +' + +test_done diff --git a/git-interface/test/t0002-serve.sh b/git-interface/test/t0002-serve.sh new file mode 100755 index 0000000..7e17bcb --- /dev/null +++ b/git-interface/test/t0002-serve.sh @@ -0,0 +1,26 @@ +#!/bin/sh + +test_description='git-serve tests' + +. ./setup.sh + +test_expect_success 'Test interactive shell.' ' + "$GIT_SERVE" 2>&1 | grep -q "Interactive shell is disabled." +' + +test_expect_success 'Test help.' ' + SSH_ORIGINAL_COMMAND=help "$GIT_SERVE" 2>&1 | grep -q "^Commands:$" +' + +test_expect_success 'Test setup-repo and list-repos.' ' + SSH_ORIGINAL_COMMAND="setup-repo foobar" AUR_USER=user \ + "$GIT_SERVE" 2>&1 && + cat >expected <<-EOF && + *foobar + EOF + SSH_ORIGINAL_COMMAND="list-repos" AUR_USER=user \ + "$GIT_SERVE" 2>&1 >actual && + test_cmp expected actual +' + +test_done diff --git a/git-interface/test/t0003-update.sh b/git-interface/test/t0003-update.sh new file mode 100755 index 0000000..0e8962c --- /dev/null +++ b/git-interface/test/t0003-update.sh @@ -0,0 +1,20 @@ +#!/bin/sh + +test_description='git-update tests' + +. ./setup.sh + +test_expect_success 'Test update hook.' ' + old=0000000000000000000000000000000000000000 && + new=$(git -C aur.git rev-parse HEAD) && + SSH_ORIGINAL_COMMAND="setup-repo foobar" AUR_USER=user "$GIT_SERVE" && + AUR_USER=user AUR_PKGBASE=foobar AUR_PRIVILEGED=0 \ + "$GIT_UPDATE" refs/heads/master "$old" "$new" 2>&1 && + cat >expected <<-EOF && + 1|1|foobar|1-1|aurweb test package.|https://aur.archlinux.org/ + EOF + echo "SELECT * FROM Packages;" | sqlite3 aur.db >actual && + test_cmp expected actual +' + +test_done -- 2.9.2