March 2014 - Pacman-dev - lists.archlinux.org

[pacman-dev] [PATCH 2/2] makepkg: enforce fakeroot usage
by Allan McRae 08 Mar '14

08 Mar '14

Packaging outside of fakeroot can result in incorrect permissions for package files. It has been years since fakeroot issues during packaging were common, so it is safe to enforce fakeroot usage. If using fakeroot is impossible for some reason, a two line wrapper script will suffice to fool makepkg. Signed-off-by: Allan McRae <allan(a)archlinux.org> --- doc/makepkg.conf.5.txt | 5 +---- etc/makepkg.conf.in | 5 ++--- scripts/makepkg.sh.in | 59 ++++++++++---------------------------------------- 3 files changed, 15 insertions(+), 54 deletions(-) diff --git a/doc/makepkg.conf.5.txt b/doc/makepkg.conf.5.txt index 9bb384e..b15f026 100644 --- a/doc/makepkg.conf.5.txt +++ b/doc/makepkg.conf.5.txt @@ -85,16 +85,13 @@ Options **DEBUG_CXXFLAGS=**"debug_cxxflags":: Debug flags used for the C++ compiler; see DEBUG_CFLAGS for more info. -**BUILDENV=(**fakeroot !distcc color !ccache check !sign**)**:: +**BUILDENV=(**!distcc color !ccache check !sign**)**:: This array contains options that affect the build environment; the defaults are shown here. All options should always be left in the array; to enable or disable an option, simply remove or add an ``!'' at the front of the option. If an option is specified multiple times, the final value takes precedence. Each option works as follows: - *fakeroot*;; - Allow building packages as a non-root user. This is highly recommended. - *distcc*;; Use the distributed C/C++/ObjC compiler to spread compilation among multiple machines. If this is enabled, `DISTCC_HOSTS` must be specified diff --git a/etc/makepkg.conf.in b/etc/makepkg.conf.in index 43a6cf2..712ca60 100644 --- a/etc/makepkg.conf.in +++ b/etc/makepkg.conf.in @@ -41,17 +41,16 @@ CHOST="@CHOST@" # BUILD ENVIRONMENT ######################################################################### # -# Defaults: BUILDENV=(fakeroot !distcc color !ccache check !sign) +# Defaults: BUILDENV=(!distcc color !ccache check !sign) # A negated environment option will do the opposite of the comments below. # -#-- fakeroot: Allow building packages as a non-root user #-- distcc: Use the Distributed C/C++/ObjC compiler #-- color: Colorize output messages #-- ccache: Use ccache to cache compilation #-- check: Run the check() function if present in the PKGBUILD #-- sign: Generate PGP signature file # -BUILDENV=(fakeroot !distcc color !ccache check !sign) +BUILDENV=(!distcc color !ccache check !sign) # #-- If using DistCC, your MAKEFLAGS will also need modification. In addition, #-- specify a space-delimited list of hosts running in the DistCC cluster. diff --git a/scripts/makepkg.sh.in b/scripts/makepkg.sh.in index 3107943..905fe0d 100644 --- a/scripts/makepkg.sh.in +++ b/scripts/makepkg.sh.in @@ -1827,7 +1827,7 @@ write_pkginfo() { msg2 "$(gettext "Generating %s file...")" ".PKGINFO" printf "# Generated by makepkg %s\n" "$makepkg_version" - (( INFAKEROOT )) && printf "# using %s\n" "$(fakeroot -v)" + printf "# using %s\n" "$(fakeroot -v)" printf "# %s\n" "$(LC_ALL=C date -u)" printf "pkgname = %s\n" "$pkgname" (( SPLITPKG )) && printf "pkgbase = %s\n" "$pkgbase" @@ -2312,7 +2312,7 @@ check_software() { local ret=0 # check for PACMAN if we need it - if (( ! INFAKEROOT && ( ! NODEPS || DEP_BIN || RMDEPS || INSTALL ) )); then + if (( ! NODEPS || DEP_BIN || RMDEPS || INSTALL )); then if [[ -z $PACMAN_PATH ]]; then error "$(gettext "Cannot find the %s binary required for dependency operations.")" "$PACMAN" ret=1 @@ -2320,16 +2320,16 @@ check_software() { fi # check for sudo if we will need it during makepkg execution - if (( ! INFAKEROOT && ( DEP_BIN || RMDEPS || INSTALL ) )); then + if (( DEP_BIN || RMDEPS || INSTALL )); then if ! type -p sudo >/dev/null; then warning "$(gettext "Cannot find the %s binary. Will use %s to acquire root privileges.")" "sudo" "su" fi fi - # fakeroot - building as non-root user + # fakeroot - correct package file permissions if check_buildenv "fakeroot" "y" && (( EUID > 0 )); then if ! type -p fakeroot >/dev/null; then - error "$(gettext "Cannot find the %s binary required for building as non-root user.")" "fakeroot" + error "$(gettext "Cannot find the %s binary.")" "fakeroot" ret=1 fi fi @@ -2790,11 +2790,6 @@ if (( ! INFAKEROOT )); then error "$(gettext "Running %s as root is not allowed as it can cause permanent,\n\ catastrophic damage to your system.")" exit 1 # $E_USER_ABORT - elif (( EUID > 0 )) && ! check_buildenv "fakeroot" "y"; then - warning "$(gettext "Running %s as an unprivileged user will result in non-root\n\ -ownership of the packaged files. Try using the %s environment by\n\ -placing %s in the %s array in %s.")" "makepkg" "fakeroot" "'fakeroot'" "BUILDENV" "$MAKEPKG_CONF" - sleep 1 fi else if [[ -z $FAKEROOTKEY ]]; then @@ -2956,12 +2951,7 @@ if (( SOURCEONLY )); then check_source_integrity cd_safe "$startdir" - # if we are root or if fakeroot is not enabled, then we don't use it - if ! check_buildenv "fakeroot" "y" || (( EUID == 0 )); then - create_srcpackage - else - enter_fakeroot - fi + enter_fakeroot msg "$(gettext "Source package created: %s")" "$pkgbase ($(date))" exit 0 @@ -3042,38 +3032,13 @@ else chmod a-srwx "$pkgdirbase" cd_safe "$startdir" - # if we are root or if fakeroot is not enabled, then we don't use it - if ! check_buildenv "fakeroot" "y" || (( EUID == 0 )); then - if (( ! REPKG )); then - if (( ! ( SPLITPKG || PKGFUNC ) )); then - chmod 755 "$pkgdirbase" - mkdir -p "$pkgdir" - fi - (( BUILDFUNC )) && run_build - (( CHECKFUNC )) && run_check - fi - chmod 755 "$pkgdirbase" - if (( ! SPLITPKG )); then - pkgdir="$pkgdirbase/$pkgname" - mkdir -p "$pkgdir" - if (( PKGFUNC )); then - run_package - fi - tidy_install - create_package - create_debug_package - else - run_split_packaging - fi - else - if (( ! REPKG )); then - (( BUILDFUNC )) && run_build - (( CHECKFUNC )) && run_check - cd_safe "$startdir" - fi - - enter_fakeroot + if (( ! REPKG )); then + (( BUILDFUNC )) && run_build + (( CHECKFUNC )) && run_check + cd_safe "$startdir" fi + + enter_fakeroot fi # if inhibiting archive creation, go no further -- 1.9.0

3 3

[pacman-dev] [PATCH 1/3] makepkg: abort if signature verification fails due to a missing public key
by Thomas Bächler 08 Mar '14

08 Mar '14

--- scripts/makepkg.sh.in | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/scripts/makepkg.sh.in b/scripts/makepkg.sh.in index e230c15..4c235cf 100644 --- a/scripts/makepkg.sh.in +++ b/scripts/makepkg.sh.in @@ -1296,10 +1296,8 @@ check_pgpsigs() { printf '%s' "$(gettext "FAILED")" >&2 if ! pubkey=$(awk '/NO_PUBKEY/ { print $3; exit 1; }' "$statusfile"); then printf ' (%s)' "$(gettext "unknown public key") $pubkey" >&2 - warnings=1 - else - errors=1 fi + errors=1 printf '\n' >&2 else if grep -q "REVKEYSIG" "$statusfile"; then -- 1.9.0

2 6

[pacman-dev] [PATCH 1/2] makepkg: Remove --asroot option
by Allan McRae 08 Mar '14

08 Mar '14

The days of fakeroot being error ridden are long gone, so there is no valid reason to run makepkg as root. Signed-off-by: Allan McRae <allan(a)archlinux.org> --- doc/makepkg.8.txt | 5 ----- scripts/makepkg.sh.in | 22 ++++++---------------- 2 files changed, 6 insertions(+), 21 deletions(-) diff --git a/doc/makepkg.8.txt b/doc/makepkg.8.txt index 4b3cbbd..9547bc8 100644 --- a/doc/makepkg.8.txt +++ b/doc/makepkg.8.txt @@ -35,11 +35,6 @@ your logs and output are not localized. Options ------- -*\--asroot*:: - Allow makepkg to run as root. This is for security purposes as it is - normally dangerous to do so. This will also disable use of fakeroot and - sudo. - *-A, \--ignorearch*:: Ignore a missing or incomplete arch field in the build script. This is for rebuilding packages from source when the PKGBUILD may be slightly diff --git a/scripts/makepkg.sh.in b/scripts/makepkg.sh.in index 8a07942..3107943 100644 --- a/scripts/makepkg.sh.in +++ b/scripts/makepkg.sh.in @@ -60,7 +60,6 @@ known_hash_algos=('md5' 'sha1' 'sha224' 'sha256' 'sha384' 'sha512') # Options ASDEPS=0 -ASROOT=0 BUILDFUNC=0 CHECKFUNC=0 CLEANBUILD=0 @@ -1006,7 +1005,7 @@ run_pacman() { else cmd=("$PACMAN_PATH" "$@") fi - if (( ! ASROOT )) && [[ ! $1 = -@(T|Qq) ]]; then + if [[ ! $1 = -@(T|Qq) ]]; then if type -p sudo >/dev/null; then cmd=(sudo "${cmd[@]}") else @@ -2321,7 +2320,7 @@ check_software() { fi # check for sudo if we will need it during makepkg execution - if (( ! ( ASROOT || INFAKEROOT ) && ( DEP_BIN || RMDEPS || INSTALL ) )); then + if (( ! INFAKEROOT && ( DEP_BIN || RMDEPS || INSTALL ) )); then if ! type -p sudo >/dev/null; then warning "$(gettext "Cannot find the %s binary. Will use %s to acquire root privileges.")" "sudo" "su" fi @@ -2536,7 +2535,6 @@ usage() { printf -- "$(gettext " -V, --version Show version information and exit")\n" printf -- "$(gettext " --allsource Generate a source-only tarball including downloaded sources")\n" printf -- "$(gettext " --verifysource Download source files (if needed) and perform integrity checks")\n" - printf -- "$(gettext " --asroot Allow %s to run as root user")\n" "makepkg" printf -- "$(gettext " --check Run the %s function in the %s")\n" "check()" "$BUILDSCRIPT" printf -- "$(gettext " --config <file> Use an alternate config file (instead of '%s')")\n" "$confdir/makepkg.conf" printf -- "$(gettext " --holdver Do not update VCS sources")\n" @@ -2587,7 +2585,7 @@ ARGLIST=("$@") # Parse Command Line Options. OPT_SHORT="AcCdefFghiLmop:rRsSV" -OPT_LONG=('allsource' 'asroot' 'check' 'clean' 'cleanbuild' 'config:' 'force' 'geninteg' +OPT_LONG=('allsource' 'check' 'clean' 'cleanbuild' 'config:' 'force' 'geninteg' 'help' 'holdver' 'ignorearch' 'install' 'key:' 'log' 'noarchive' 'nobuild' 'nocolor' 'nocheck' 'nodeps' 'noextract' 'noprepare' 'nosign' 'pkg:' 'repackage' 'rmdeps' 'sign' 'skipchecksums' 'skipinteg' 'skippgpcheck' 'source' 'syncdeps' @@ -2612,7 +2610,6 @@ while true; do # Makepkg Options --allsource) SOURCEONLY=2 ;; - --asroot) ASROOT=1 ;; -A|--ignorearch) IGNOREARCH=1 ;; -c|--clean) CLEANUP=1 ;; -C|--cleanbuild) CLEANBUILD=1 ;; @@ -2789,16 +2786,9 @@ PACKAGER=${_PACKAGER:-$PACKAGER} CARCH=${_CARCH:-$CARCH} if (( ! INFAKEROOT )); then - if (( EUID == 0 && ! ASROOT )); then - # Warn those who like to live dangerously. - error "$(gettext "Running %s as root is a BAD idea and can cause permanent,\n\ -catastrophic damage to your system. If you wish to run as root, please\n\ -use the %s option.")" "makepkg" "--asroot" - exit 1 # $E_USER_ABORT - elif (( EUID > 0 && ASROOT )); then - # Warn those who try to use the --asroot option when they are not root - error "$(gettext "The %s option is meant for the root user only. Please\n\ -rerun %s without the %s flag.")" "--asroot" "makepkg" "--asroot" + if (( EUID == 0 )); then + error "$(gettext "Running %s as root is not allowed as it can cause permanent,\n\ +catastrophic damage to your system.")" exit 1 # $E_USER_ABORT elif (( EUID > 0 )) && ! check_buildenv "fakeroot" "y"; then warning "$(gettext "Running %s as an unprivileged user will result in non-root\n\ -- 1.9.0

1 0

[pacman-dev] [PATCHv3 1/3] makepkg: Add a --noarchive option to inhibit archive creation
by Pierre Neidhardt 08 Mar '14

08 Mar '14

1. Packagers who want to test the package() function, i.e. to check the content of the pkg/ folder. 2. Developers who want to check how the packaged version of a program looks, in other words how the pkg/ folder looks. 3. For users of systems with no port tree, makepkg can ease package creation. However the resulting archive of the whole makepkg process is often useless. For all situations, makepkg will usually be called several times. But no archive (the final package) is needed in any cases. The archive creation ends up being a waste of time and resource, especially for big applications and slow machines. Since this option aborts the process prematurely, it behaves like the -o,--nobuild option, i.e. any other option acting on later stages in the process will be automatically discarded. For --noarchive, it means that in $ makepkg --noarchive --install the '--install' option does not do anything. Signed-off-by: Pierre Neidhardt <ambrevar(a)gmail.com> --- doc/makepkg.8.txt | 5 +++++ scripts/makepkg.sh.in | 22 +++++++++++++++++----- 2 files changed, 22 insertions(+), 5 deletions(-) diff --git a/doc/makepkg.8.txt b/doc/makepkg.8.txt index 77a7a83..4b3cbbd 100644 --- a/doc/makepkg.8.txt +++ b/doc/makepkg.8.txt @@ -165,6 +165,11 @@ Options Run the check() function in the PKGBUILD, overriding the setting in linkman:makepkg.conf[5]. +*\--noarchive*:: + Do not create the archive at the end of the build process. This can be + useful to test the package() function or if your target distribution does + not use pacman. + *\--nocheck*:: Do not run the check() function in the PKGBUILD or handle the checkdepends. diff --git a/scripts/makepkg.sh.in b/scripts/makepkg.sh.in index e230c15..9d2b43f 100644 --- a/scripts/makepkg.sh.in +++ b/scripts/makepkg.sh.in @@ -74,6 +74,7 @@ INFAKEROOT=0 INSTALL=0 LOGGING=0 NEEDED=0 +NOARCHIVE=0 NOBUILD=0 NODEPS=0 NOEXTRACT=0 @@ -1868,6 +1869,8 @@ write_pkginfo() { } create_package() { + (( NOARCHIVE )) && return + if [[ ! -d $pkgdir ]]; then error "$(gettext "Missing %s directory.")" "\$pkgdir/" plain "$(gettext "Aborting...")" @@ -2403,7 +2406,7 @@ check_build_status() { fullver=$(get_full_version) pkgarch=$(get_pkg_arch) if [[ -f $PKGDEST/${pkgname}-${fullver}-${pkgarch}${PKGEXT} ]] \ - && ! (( FORCE || SOURCEONLY || NOBUILD )); then + && ! (( FORCE || SOURCEONLY || NOBUILD || NOARCHIVE)); then if (( INSTALL )); then warning "$(gettext "A package has already been built, installing existing package...")" install_package @@ -2425,7 +2428,7 @@ check_build_status() { allpkgbuilt=0 fi done - if ! (( FORCE || SOURCEONLY || NOBUILD )); then + if ! (( FORCE || SOURCEONLY || NOBUILD || NOARCHIVE)); then if (( allpkgbuilt )); then if (( INSTALL )); then warning "$(gettext "The package group has already been built, installing existing packages...")" @@ -2537,6 +2540,7 @@ usage() { printf -- "$(gettext " --config <file> Use an alternate config file (instead of '%s')")\n" "$confdir/makepkg.conf" printf -- "$(gettext " --holdver Do not update VCS sources")\n" printf -- "$(gettext " --key <key> Specify a key to use for %s signing instead of the default")\n" "gpg" + printf -- "$(gettext " --noarchive Do not create archive")\n" printf -- "$(gettext " --nocheck Do not run the %s function in the %s")\n" "check()" "$BUILDSCRIPT" printf -- "$(gettext " --noprepare Do not run the %s function in the %s")\n" "prepare()" "$BUILDSCRIPT" printf -- "$(gettext " --nosign Do not create a signature for the package")\n" @@ -2582,10 +2586,11 @@ ARGLIST=("$@") # Parse Command Line Options. OPT_SHORT="AcCdefFghiLmop:rRsSV" + OPT_LONG=('allsource' 'asroot' 'check' 'clean' 'cleanbuild' 'config:' 'force' 'geninteg' - 'help' 'holdver' 'ignorearch' 'install' 'key:' 'log' 'nobuild' 'nocolor' - 'nocheck' 'nodeps' 'noextract' 'noprepare' 'nosign' 'pkg:' 'repackage' 'rmdeps' - 'sign' 'skipchecksums' 'skipinteg' 'skippgpcheck' 'source' 'syncdeps' + 'help' 'holdver' 'ignorearch' 'install' 'key:' 'log' 'noarchive' 'nobuild' + 'nocolor' 'nocheck' 'nodeps' 'noextract' 'noprepare' 'nosign' 'pkg:' 'repackage' + 'rmdeps' 'sign' 'skipchecksums' 'skipinteg' 'skippgpcheck' 'source' 'syncdeps' 'verifysource' 'version') # Pacman Options @@ -2623,6 +2628,7 @@ while true; do --key) shift; GPGKEY=$1 ;; -L|--log) LOGGING=1 ;; -m|--nocolor) USE_COLOR='n' ;; + --noarchive) NOARCHIVE=1 ;; --nocheck) RUN_CHECK='n' ;; --noprepare) RUN_PREPARE='n' ;; --nosign) SIGNPKG='n' ;; @@ -3080,6 +3086,12 @@ else fi fi +# if inhibiting archive creation, go no further +if (( NOARCHIVE )); then + msg "$(gettext "Package folder is ready.")" + exit 0 +fi + fullver=$(get_full_version) msg "$(gettext "Finished making: %s")" "$pkgbase $fullver ($(date))" -- 1.9.0

2 7

[pacman-dev] [PATCH] pacman/upgrade: Check malloc() return value
by Sören Brinkmann 08 Mar '14

08 Mar '14

Check the return value of malloc() before dereferencing the returned pointer. Signed-off-by: Sören Brinkmann <soeren.brinkmann(a)gmail.com> --- src/pacman/upgrade.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/src/pacman/upgrade.c b/src/pacman/upgrade.c index 5416f6180b39..19aa17218ce4 100644 --- a/src/pacman/upgrade.c +++ b/src/pacman/upgrade.c @@ -51,6 +51,9 @@ int pacman_upgrade(alpm_list_t *targets) */ for(i = targets; i; i = alpm_list_next(i)) { int *r = malloc(sizeof(int)); + if(r == NULL) { + return 1; + } if(strstr(i->data, "://")) { char *str = alpm_fetch_pkgurl(config->handle, i->data); -- 1.9.0

2 4

[pacman-dev] [PATCH] note that TotalDownload and XferCommand are incompatible.
by Matthias Krüger 08 Mar '14

08 Mar '14

Another small patch that I made long ago (but was too lazy to submit back then). When using XferCommand, TotalDownload option is not take into account. Regards, Matthias

2 1

[pacman-dev] [RFC] makepkg: Introduce acceptkeys array
by Thomas Bächler 08 Mar '14

08 Mar '14

If acceptkeys is set in the PKGBUILD, signature checking fails if the fingerprint of the key used to create the signature is not listed in the array. Failure to verify the signature due to a missing public key is also treated as an error instead of a warning. --- scripts/makepkg.sh.in | 36 ++++++++++++++++++++++++++---------- 1 file changed, 26 insertions(+), 10 deletions(-) diff --git a/scripts/makepkg.sh.in b/scripts/makepkg.sh.in index e230c15..40c5b48 100644 --- a/scripts/makepkg.sh.in +++ b/scripts/makepkg.sh.in @@ -1250,7 +1250,7 @@ check_pgpsigs() { msg "$(gettext "Verifying source file signatures with %s...")" "gpg" - local file pubkey ext decompress found + local file pubkey ext decompress found success local warning=0 local errors=0 local statusfile=$(mktemp) @@ -1296,7 +1296,11 @@ check_pgpsigs() { printf '%s' "$(gettext "FAILED")" >&2 if ! pubkey=$(awk '/NO_PUBKEY/ { print $3; exit 1; }' "$statusfile"); then printf ' (%s)' "$(gettext "unknown public key") $pubkey" >&2 - warnings=1 + if (( ${#acceptkeys[@]} > 0 )); then + errors=1 + else + warnings=1 + fi else errors=1 fi @@ -1306,13 +1310,25 @@ check_pgpsigs() { printf '%s (%s)' "$(gettext "FAILED")" "$(gettext "the key has been revoked.")" >&2 errors=1 else - printf '%s' "$(gettext "Passed")" >&2 - if grep -q "EXPSIG" "$statusfile"; then - printf ' (%s)' "$(gettext "WARNING:") $(gettext "the signature has expired.")" >&2 - warnings=1 - elif grep -q "EXPKEYSIG" "$statusfile"; then - printf ' (%s)' "$(gettext "WARNING:") $(gettext "the key has expired.")" >&2 - warnings=1 + success=1 + if (( ${#acceptkeys[@]} > 0 )); then + pubkey=$(grep VALIDSIG "$statusfile" | sed -nr 's/.* VALIDSIG ([A-Z0-9]*) .*/\1/p;' | awk '{print tolower($0)}') + if ! in_array $pubkey ${acceptkeys[@]}; then + printf '%s' "$(gettext "FAILED")" >&2 + printf " ($(gettext 'the fingerprint %s is not accepted.'))" "$pubkey" >&2 + success=0 + errors=1 + fi + fi + if (( $success )); then + printf '%s' "$(gettext "Passed")" >&2 + if grep -q "EXPSIG" "$statusfile"; then + printf ' (%s)' "$(gettext "WARNING:") $(gettext "the signature has expired.")" >&2 + warnings=1 + elif grep -q "EXPKEYSIG" "$statusfile"; then + printf ' (%s)' "$(gettext "WARNING:") $(gettext "the key has expired.")" >&2 + warnings=1 + fi fi fi printf '\n' >&2 @@ -2809,7 +2825,7 @@ fi unset pkgname pkgbase pkgver pkgrel epoch pkgdesc url license groups provides unset md5sums replaces depends conflicts backup source install changelog build -unset makedepends optdepends options noextract +unset makedepends optdepends options noextract acceptkeys BUILDFILE=${BUILDFILE:-$BUILDSCRIPT} if [[ ! -f $BUILDFILE ]]; then -- 1.9.0

2 2

[pacman-dev] [PATCH] Use MALLOC throughtout libalpm
by Allan McRae 08 Mar '14

08 Mar '14

Use MALLOC instead of malloc for safety in libalpm. Some changes are pure refactoring, but for others this provides a success check for memory allocation. Signed-off-by: Allan McRae <allan(a)archlinux.org> --- lib/libalpm/be_local.c | 6 +----- lib/libalpm/be_package.c | 8 +++----- lib/libalpm/pkghash.c | 5 +---- lib/libalpm/sync.c | 3 ++- 4 files changed, 7 insertions(+), 15 deletions(-) diff --git a/lib/libalpm/be_local.c b/lib/libalpm/be_local.c index 5474995..9a9bdef 100644 --- a/lib/libalpm/be_local.c +++ b/lib/libalpm/be_local.c @@ -743,11 +743,7 @@ static int local_db_read(alpm_pkg_t *info, alpm_dbinfrq_t inforeq) /* since we know the length of the file string already, * we can do malloc + memcpy rather than strdup */ len += 1; - files[files_count].name = malloc(len); - if(files[files_count].name == NULL) { - _alpm_alloc_fail(len); - goto error; - } + MALLOC(files[files_count].name, len, goto error); memcpy(files[files_count].name, line, len); files_count++; } diff --git a/lib/libalpm/be_package.c b/lib/libalpm/be_package.c index 3c35484..dc2e072 100644 --- a/lib/libalpm/be_package.c +++ b/lib/libalpm/be_package.c @@ -39,6 +39,7 @@ #include "package.h" #include "deps.h" #include "filelist.h" +#include "util.h" struct package_changelog { struct archive *archive; @@ -404,11 +405,8 @@ static int add_entry_to_files_list(alpm_pkg_t *pkg, size_t *files_size, * Other code relies on it to detect directories so add it here.*/ if(type == AE_IFDIR && path[pathlen - 1] != '/') { /* 2 = 1 for / + 1 for \0 */ - char *newpath = malloc(pathlen + 2); - if (!newpath) { - _alpm_alloc_fail(pathlen + 2); - return -1; - } + char *newpath; + MALLOC(newpath, pathlen + 2, return -1); strcpy(newpath, path); newpath[pathlen] = '/'; newpath[pathlen + 1] = '\0'; diff --git a/lib/libalpm/pkghash.c b/lib/libalpm/pkghash.c index 2f68278..a740233 100644 --- a/lib/libalpm/pkghash.c +++ b/lib/libalpm/pkghash.c @@ -172,10 +172,7 @@ static alpm_pkghash_t *pkghash_add_pkg(alpm_pkghash_t *hash, alpm_pkg_t *pkg, position = get_hash_position(pkg->name_hash, hash); - ptr = malloc(sizeof(alpm_list_t)); - if(ptr == NULL) { - return hash; - } + MALLOC(ptr, sizeof(alpm_list_t), return hash); ptr->data = pkg; ptr->prev = ptr; diff --git a/lib/libalpm/sync.c b/lib/libalpm/sync.c index 7e40d98..a025b68 100644 --- a/lib/libalpm/sync.c +++ b/lib/libalpm/sync.c @@ -1135,8 +1135,9 @@ static int check_validity(alpm_handle_t *handle, if(_alpm_pkg_validate_internal(handle, v.path, v.pkg, v.level, &v.siglist, &v.validation) == -1) { + struct validity *invalid; v.error = handle->pm_errno; - struct validity *invalid = malloc(sizeof(struct validity)); + MALLOC(invalid, sizeof(struct validity), return -1); memcpy(invalid, &v, sizeof(struct validity)); errors = alpm_list_add(errors, invalid); } else { -- 1.9.0

1 0

[pacman-dev] Another 4.1.x release?
by Jerome Barnett 06 Mar '14

06 Mar '14

Allan, Here's a nice candidate for inclusion in a 4.1.x release: https://projects.archlinux.org/pacman.git/commit/?id=dfcea1456da5df042f2ba2… which was in response to: Arch FS#31479 Full disclosure: It was my feature request and I'm biased, but it is a nice self-contained patch. Anyways, thank you for your consideration. -Jerome (TechRyda)

3 2

[pacman-dev] [PATCHv3 1/2] contrib: adding pacsize
by Pierre Neidhardt 06 Mar '14

06 Mar '14

Printing package size is useful for maintenance. Indeed, the first entry on the wiki is focused on this topic: https://wiki.archlinux.org/index.php/Pacman_Tips#Maintenance None of the proposed solutions will allow you to: - select packages; - work on the output of other commands yielding a list of packages; - change the sorting; - be locale independent; - print a grand total; - be fast (most solution are wasting a lot of time -- only expac is faster); - not rely on third-party tools. Pacsize is a POSIX shell script that is generic enough to enclose all these features (and more). It superseeds the (broken) pacsysclean. Signed-off-by: Pierre Neidhardt <ambrevar(a)gmail.com> --- contrib/.gitignore | 1 + contrib/Makefile.am | 3 + contrib/README | 4 ++ contrib/pacsize.sh.in | 161 ++++++++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 169 insertions(+) create mode 100644 contrib/pacsize.sh.in diff --git a/contrib/.gitignore b/contrib/.gitignore index a181813..9cecd5e 100644 --- a/contrib/.gitignore +++ b/contrib/.gitignore @@ -7,6 +7,7 @@ paclist paclog-pkglist pacscripts pacsearch +pacsize pacsysclean rankmirrors updpkgsums diff --git a/contrib/Makefile.am b/contrib/Makefile.am index f6ca3f1..8c5c6da 100644 --- a/contrib/Makefile.am +++ b/contrib/Makefile.am @@ -12,6 +12,7 @@ BASHSCRIPTS = \ paclist \ paclog-pkglist \ pacscripts \ + pacsize \ pacsysclean \ rankmirrors \ updpkgsums @@ -38,6 +39,7 @@ EXTRA_DIST = \ paclist.sh.in \ pacscripts.sh.in \ pacsearch.in \ + pacsize.sh.in \ pacsysclean.sh.in \ rankmirrors.sh.in \ updpkgsums.sh.in \ @@ -102,6 +104,7 @@ paclist: $(srcdir)/paclist.sh.in paclog-pkglist: $(srcdir)/paclog-pkglist.sh.in pacscripts: $(srcdir)/pacscripts.sh.in pacsearch: $(srcdir)/pacsearch.in +pacsize: $(srcdir)/pacsize.sh.in pacsysclean: $(srcdir)/pacsysclean.sh.in rankmirrors: $(srcdir)/rankmirrors.sh.in updpkgsums: $(srcdir)/updpkgsums.sh.in diff --git a/contrib/README b/contrib/README index ae33bb2..4f5c17f 100644 --- a/contrib/README +++ b/contrib/README @@ -31,6 +31,10 @@ pacsearch - a colorized search combining both -Ss and -Qs output. Installed packages are easily identified with a *** and local-only packages are also listed. +pacsize - display the size of packages. Duplicates are removed if any. The local +database is queried first; if the package is not found, the sync database is +then used for lookup. + pacsysclean - lists installed packages sorted by size. rankmirrors - ranks pacman mirrors by their connection and opening speed. diff --git a/contrib/pacsize.sh.in b/contrib/pacsize.sh.in new file mode 100644 index 0000000..c84dd72 --- /dev/null +++ b/contrib/pacsize.sh.in @@ -0,0 +1,161 @@ +#!/bin/sh +# pacsize -- display package sizes +# +# Copyright (C) 2014 Pierre Neidhardt <ambrevar(a)gmail.com> +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License +# as published by the Free Software Foundation; either version 2 +# of the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +readonly myname='pacsize' +readonly myver='@PACKAGE_VERSION@' + +calc_total () { + awk '{ + total += $1 + print +} +END { + printf ("%7s KIB TOTAL\n", total) +}' +} + +error () { + echo "$@" >&2 +} + +## Print size and name. We round to the lowest integer, this makes output +## lighter. +filter () { + awk -F ": " \ + '$0 ~ "^Name" { + pkg = $2 +} +$0 ~ "^Installed Size" { + split($2, a, " ") + printf ("%4d%s %s\n", a[1], a[2], pkg) +}' +} + +remove_duplicates () { + awk '! table[$0]++' +} + +usage () { + cat <<EOF +Usage: ${1##*/} [OPTIONS] PACKAGES + ${1##*/} -a [OPTIONS] + +Display the size of PACKAGES. Duplicates are removed if any. The local database +is queried first; if the package is not found, the sync database is then used +for lookup. + +Options: + + -a: Process all installed packages. + -h: Show this help. + -n: Sort output by name. + -s: Sort output by size. + -t: Print total. + -V: Show version information. + +Examples: + + $ ${1##*/} -ast + Convenient way to keep track of big packages. + + $ ${1##*/} \$(pactree -ld1 linux) + Print the size of linux and all its direct dependencies. + + $ ${1##*/} -st \$(pacman -Qdtq) + Print a grand total of orphan packages, and sort by size. +EOF +} + +version () { + echo "$myname $myver" + echo 'Copyright (C) 2014 Pierre Neidhardt <ambrevar(a)gmail.com>' +} + +opt_sort=false +opt_all=false +opt_total=false + +while getopts ":ahnstV" opt; do + case $opt in + a) + opt_all=true ;; + h) + usage "$0" + exit ;; + n) + opt_sort="sort -uk3" ;; + s) + opt_sort="sort -uh" ;; + t) + opt_total="calc_total" ;; + V) + version "$0" + exit ;; + ?) + usage "$0" + exit 1 ;; + esac +done + +shift $(($OPTIND - 1)) + +## All-packages mode. +## We use a dedicated algorithm which is much faster than per-package mode. +## Unfortunately there is no easy way to select packages with this method. +if $opt_all; then + DBPath="$(awk -F "=[ \t]*" '/^[ \t]*DBPath[ \t]*=/{gsub(/[ \t]*$/, "", $2); print $2}' @sysconfdir@/pacman.conf 2>/dev/null)" + [ -z "$DBPath" ] && DBPath="@localstatedir@/lib/pacman" + + if [ ! -d "$DBPath/local/" ]; then + error "Could not find local database in $DBPath/local/." + exit 1 + fi + + awk 'BEGIN { + split("B KiB MiB GiB TiB PiB EiB ZiB YiB", unit) +} +$0 == "%NAME%" { + getline pkg +} +$0 == "%SIZE%" { + getline size + i = 1 + while (size > 2048) { + size /= 1024 + i++ + } + printf ("%4d%s %s\n", size, unit[i], pkg) +}' "$DBPath"/local/*/desc | { $opt_sort || cat ;} | { $opt_total || cat ;} + exit +fi + +## Per-package mode. +if [ $# -eq 0 ]; then + error "Missing argument." + usage "$0" + exit 1 +fi + +{ + ## If package is not found locally (-Q), we use the sync database (-S). We + ## use LC_ALL=C to make sure pacman output is not localized. + buffer=$(LC_ALL=C pacman -Qi "$@" 2>&1 1>&3 3>&- | cut -f2 -d "'") + [ -n "$buffer" ] && LC_ALL=C pacman -Si $buffer +} 3>&1 | filter | { $opt_sort || remove_duplicates ;} | { $opt_total || cat ;} + +# vim: set noet: -- 1.9.0

1 0