[pacman-dev] updated french translation
hi. i have used the fr.po i have found in the source of http://www.archlinux.org/~dan/pacman/pacman-3.0.0.tar.gz to make an updated version of the src/pacman/po/fr.po file you will find it attached (if it passes some filtering) with a patch. but although i have translated all the strings, some output is still not translated when i run pacman. so the fr.po i work on is not up to date ? i see nowhere into what translate 'is newer than' for example ? and i have translated ':: Starting full system upgrade...' but it is not translated in pacman's output ? what's wrong ? my fr.po ? (yes i have recompiled pacman thnx) # pacman -Syu :: Synchronisation des bases de données de paquets... current 72,6K 44,5K/s 00:00:02 [#####################] 100% extra 277,6K 45,3K/s 00:00:06 [#####################] 100% community 175,2K 33,9K/s 00:00:05 [#####################] 100% :: Starting full system upgrade... avertissement: cmake: local (2.4.6-0) is newer than current (2.4.5-1) avertissement: easytag: local (1.99.13-1) is newer than extra (1.99.12-1) avertissement: ffmpeg: local (20070201-1) is newer than extra (20070131-1) avertissement: fwlogwatch: local (1.1-0) is newer than extra (1.0-1) avertissement: libtorrent: local (0.11.2-0) is newer than community (0.11.1-1) avertissement: pacman: local (3.0.0-1) is newer than current (2.9.8-4) avertissement: rtorrent: local (0.7.2-0) is newer than community (0.7.1-1) avertissement: ruby: local (1.8.5_p12-0) is newer than current (1.8.5_p2-1) résolution des dépendances...fait. recherche inter-conflits... fait. Cibles: cairo-1.4.0-1 esd-0.2.37-2 glib2-2.12.10-1 gnupg-1.4.7-1 gpgme-1.1.4-1 pango-1.16.0-2 libxrandr-1.2.1-1 gtk2-2.10.9-3 gwenview-1.4.1-3 jasper-1.701.0-5 kdebase-3.5.6-3 Total Package Size: 41,61 MB Proceed with installation? [Y/n] :: Retrieving packages from current... cairo 519,7K 36,3K/s 00:00:14 [#####################] 100% esd 102,0K 48,7K/s 00:00:02 [#####################] 100% glib2 1211,4K 39,8K/s 00:00:30 [#####################] 100% gnupg 1703,7K 39,1K/s 00:00:44 [#####################] 100% pango 372,3K 41,4K/s 00:00:09 [#####################] 100% libxrandr 27,6K 37,3K/s 00:00:01 [#####################] 100% gtk2 6,9M 43,8K/s 00:02:42 [#####################] 100% :: Retrieving packages from extra... gpgme 250,7K 45,6K/s 00:00:05 [#####################] 100% gwenview 924,6K 31,8K/s 00:00:29 [#####################] 100% kdebase 29,4M 44,0K/s 00:11:23 [#####################] 100% verification de l'intégrité des paquetsfait. cleaning up... fait. (11/11) checking for file conflicts [#####################] 100% ( 1/11) Mise à jour cairo [#####################] 100% ( 2/11) Mise à jour esd [#####################] 100% ( 3/11) Mise à jour glib2 [#####################] 100% ( 4/11) Mise à jour gnupg [#####################] 100% ( 5/11) Mise à jour gpgme [#####################] 100% ( 6/11) Mise à jour pango [#####################] 100% ( 7/11) Mise à jour libxrandr [#####################] 100% ( 8/11) Mise à jour gtk2 [#####################] 100% ( 9/11) Mise à jour gwenview [#####################] 100% (10/11) Mise à jour jasper [#####################] 100% (11/11) Mise à jour kdebase [#####################] 100%
On 3/8/07, solsTiCe d'Hiver <solstice.dhiver@laposte.net> wrote:
hi. i have used the fr.po i have found in the source of http://www.archlinux.org/~dan/pacman/pacman-3.0.0.tar.gz
to make an updated version of the src/pacman/po/fr.po file
you will find it attached (if it passes some filtering) with a patch.
but although i have translated all the strings, some output is still not translated when i run pacman. so the fr.po i work on is not up to date ?
i see nowhere into what translate 'is newer than' for example ? and i have translated ':: Starting full system upgrade...' but it is not translated in pacman's output ? what's wrong ? my fr.po ?
Hi, Thanks for the updated translation, it is now checked in to CVS. Sorry about it taking a while- it was stuck in the mail queue because the message was too big; next time I would recommend using bzip2 or gzip on the attachments. A few pointers which hopefully answer your questions: 1. You may want to work straight from the CVS source, this makes it much easier to ensure you are translating the current po file with the current strings. For more instructions on how to get a checkout, see the (outdated) website at <http://www.archlinux.org/pacman/>, and look at the 'Pacman 3' section. 2. Once you get CVS checked out as explained on the website, you can keep it up to date by just running 'cvs update'. In CVS you'll find a file called 'translation-help', which is a good read to get started with all the translation stuff. Please let me know if anything in there is unclear, I threw it together pretty quickly. 3. That file should mention some translation programs that make editing the po files a lot easier and slicker. Off the top of my head, I know gtranslator (community), and poedit (AUR) are available. 4. The reason some of your strings are not showing up is because you did not remove the 'fuzzy' designation from those you fixed. I am guessing you did this by hand; most of the GUI tools will automatically do this for you after you edit a string. fuzzy indicates that a string may not be quite right, and I believe our current settings do not include fuzzy translations in the final output files. Feel free to contact us with any more questions, as either I or the other translators should be able to help you out. -Dan
participants (2)
-
Dan McGee
-
solsTiCe d'Hiver