On Sat, Apr 26, 2008 at 8:37 AM, Chantry Xavier wrote:

The calls to alpm_trans_init and alpm_trans_release (+ error checking) were duplicated between remove.c, sync.c and upgrade.c This patch introduces trans_init and trans_release functions in util.c to have this code just once.

So instead of having to do the same change 3 times for fixing FS#10273, I just had to do it once (so I did it too :))

Much better, thanks for the cleanup. Comments inline.

Signed-off-by: Chantry Xavier --- src/pacman/remove.c | 35 ++++++++--------------------------- src/pacman/sync.c | 39 ++++++++------------------------------- src/pacman/upgrade.c | 34 +++++++--------------------------- src/pacman/util.c | 28 ++++++++++++++++++++++++++++ src/pacman/util.h | 2 ++ 5 files changed, 53 insertions(+), 85 deletions(-)

diff --git a/src/pacman/remove.c b/src/pacman/remove.c index 2fb69d3..a2209ac 100644 --- a/src/pacman/remove.c +++ b/src/pacman/remove.c @@ -29,24 +29,10 @@ /* pacman */ #include "pacman.h" #include "util.h" -#include "callback.h" #include "conf.h"

extern pmdb_t *db_local;

-/* Free the current transaction and print an error if unsuccessful */ -static int remove_cleanup(void) -{ - int ret = alpm_trans_release(); - if(ret != 0) { - pm_printf(PM_LOG_ERROR, _("failed to release transaction (%s)\n"), - alpm_strerrorlast()); - ret = 1; - } - - return(ret); -} - /** * @brief Remove a specified list of packages. * @@ -90,14 +76,7 @@ int pacman_remove(alpm_list_t *targets) }

/* Step 1: create a new transaction */ - if(alpm_trans_init(PM_TRANS_TYPE_REMOVE, config->flags, - cb_trans_evt, cb_trans_conv, cb_trans_progress) == -1) { - fprintf(stderr, _("error: failed to init transaction (%s)\n"), - alpm_strerrorlast()); - if(pm_errno == PM_ERR_HANDLE_LOCK) { - printf(_(" if you're sure a package manager is not already\n" - " running, you can remove %s.\n"), alpm_option_get_lockfile()); - } + if(trans_init(PM_TRANS_TYPE_REMOVE, config->flags) == -1) { FREELIST(finaltargs); return(1); } @@ -109,7 +88,7 @@ int pacman_remove(alpm_list_t *targets) if(alpm_trans_addtarget(targ) == -1) { fprintf(stderr, _("error: '%s': %s\n"), targ, alpm_strerrorlast()); - remove_cleanup(); + trans_release(); FREELIST(finaltargs); return(1); } @@ -134,7 +113,7 @@ int pacman_remove(alpm_list_t *targets) default: break; } - remove_cleanup(); + trans_release(); We never check the return value of trans_release(), but I guess that is OK because we are returning an error condition anyway? This happens about 50 times.

FREELIST(finaltargs); return(1); } @@ -154,7 +133,7 @@ int pacman_remove(alpm_list_t *targets) FREELIST(lst); /* get confirmation */ if(yesno(1, _("\nDo you want to remove these packages?")) == 0) { - remove_cleanup(); + trans_release(); FREELIST(finaltargs); return(1); } @@ -165,13 +144,15 @@ int pacman_remove(alpm_list_t *targets) if(alpm_trans_commit(NULL) == -1) { fprintf(stderr, _("error: failed to commit transaction (%s)\n"), alpm_strerrorlast()); - remove_cleanup(); + trans_release(); FREELIST(finaltargs); return(1); }

/* Step 4: release transaction resources */ - retval = remove_cleanup(); + if(trans_release() == -1) { + retval = 1; + }

Ahh, so we do check it here. Good.

FREELIST(finaltargs); return(retval); } diff --git a/src/pacman/sync.c b/src/pacman/sync.c index c074746..77b66da 100644 --- a/src/pacman/sync.c +++ b/src/pacman/sync.c @@ -34,7 +34,6 @@ #include "pacman.h" #include "util.h" #include "package.h" -#include "callback.h"

Wow, even cleaning out the headers. Nice work.

#include "conf.h"

extern pmdb_t *db_local; @@ -235,34 +234,12 @@ static int sync_cleancache(int level) return(0); }

-static int sync_trans_init(pmtransflag_t flags) { - if(alpm_trans_init(PM_TRANS_TYPE_SYNC, flags, cb_trans_evt, - cb_trans_conv, cb_trans_progress) == -1) { - fprintf(stderr, _("error: failed to init transaction (%s)\n"), - alpm_strerrorlast()); - if(pm_errno == PM_ERR_HANDLE_LOCK) { - printf(_(" if you're sure a package manager is not already\n" - " running, you can remove %s.\n"), alpm_option_get_lockfile()); - } - return(-1); - } - return(0); -} - -static int sync_trans_release() { - if(alpm_trans_release() == -1) { - fprintf(stderr, _("error: failed to release transaction (%s)\n"), - alpm_strerrorlast()); - return(-1); - } - return(0); -} static int sync_synctree(int level, alpm_list_t *syncs) { alpm_list_t *i; int success = 0, ret;

- if(sync_trans_init(0) == -1) { + if(trans_init(PM_TRANS_TYPE_SYNC, 0) == -1) { return(0); }

@@ -281,7 +258,7 @@ static int sync_synctree(int level, alpm_list_t *syncs) } }

- if(sync_trans_release() == -1) { + if(trans_release() == -1) { return(0); } /* We should always succeed if at least one DB was upgraded - we may possibly @@ -552,7 +529,7 @@ static int sync_trans(alpm_list_t *targets) alpm_list_t *sync_dbs = alpm_option_get_syncdbs();

/* Step 1: create a new transaction... */ - if(sync_trans_init(config->flags) == -1) { + if(trans_init(PM_TRANS_TYPE_SYNC, config->flags) == -1) { return(1); }

@@ -583,10 +560,10 @@ static int sync_trans(alpm_list_t *targets) printf(_(":: pacman has detected a newer version of itself.\n")); if(yesno(1, _(":: Do you want to cancel the current operation\n" ":: and install the new pacman version now?"))) { - if(sync_trans_release() == -1) { + if(trans_release() == -1) { return(1); } - if(sync_trans_init(0) == -1) { + if(trans_init(PM_TRANS_TYPE_SYNC, 0) == -1) { return(1); } if(alpm_trans_addtarget("pacman") == -1) { @@ -788,7 +765,7 @@ cleanup: if(data) { FREELIST(data); } - if(sync_trans_release() == -1) { + if(trans_release() == -1) { retval = 1; }

@@ -803,14 +780,14 @@ int pacman_sync(alpm_list_t *targets) if(config->op_s_clean) { int ret = 0;

- if(sync_trans_init(0) == -1) { + if(trans_init(PM_TRANS_TYPE_SYNC, 0) == -1) { return(1); }

ret += sync_cleancache(config->op_s_clean); ret += sync_cleandb_all();

- if(sync_trans_release() == -1) { + if(trans_release() == -1) { ret++; }

diff --git a/src/pacman/upgrade.c b/src/pacman/upgrade.c index e562651..589970e 100644 --- a/src/pacman/upgrade.c +++ b/src/pacman/upgrade.c @@ -28,23 +28,9 @@

/* pacman */ #include "pacman.h" -#include "callback.h" #include "conf.h" #include "util.h"

-/* Free the current transaction and print an error if unsuccessful */ -static int upgrade_cleanup(void) -{ - int ret = alpm_trans_release(); - if(ret != 0) { - pm_printf(PM_LOG_ERROR, _("failed to release transaction (%s)\n"), - alpm_strerrorlast()); - ret = 1; - } - - return(ret); -} - /** * @brief Upgrade a specified list of packages. * @@ -78,15 +64,7 @@ int pacman_upgrade(alpm_list_t *targets) }

/* Step 1: create a new transaction */ - if(alpm_trans_init(transtype, config->flags, cb_trans_evt, - cb_trans_conv, cb_trans_progress) == -1) { - /* TODO: error messages should be in the front end, not the back */ - fprintf(stderr, _("error: %s\n"), alpm_strerrorlast()); - if(pm_errno == PM_ERR_HANDLE_LOCK) { - /* TODO this and the 2 other places should probably be on stderr */ - printf(_(" if you're sure a package manager is not already\n" - " running, you can remove %s.\n"), alpm_option_get_lockfile()); - } + if(trans_init(transtype, config->flags) == -1) { return(1); }

@@ -97,7 +75,7 @@ int pacman_upgrade(alpm_list_t *targets) if(alpm_trans_addtarget(targ) == -1) { fprintf(stderr, _("error: '%s': %s\n"), targ, alpm_strerrorlast()); - upgrade_cleanup(); + trans_release(); return(1); } } @@ -151,7 +129,7 @@ int pacman_upgrade(alpm_list_t *targets) default: break; } - upgrade_cleanup(); + trans_release(); FREELIST(data); return(1); } @@ -160,11 +138,13 @@ int pacman_upgrade(alpm_list_t *targets) /* Step 3: perform the installation */ if(alpm_trans_commit(NULL) == -1) { fprintf(stderr, _("error: failed to commit transaction (%s)\n"), alpm_strerrorlast()); - upgrade_cleanup(); + trans_release(); return(1); }

- retval = upgrade_cleanup(); + if(trans_release() == -1) { + retval = 1; + } return(retval); }

diff --git a/src/pacman/util.c b/src/pacman/util.c index ed7669a..2cef54f 100644 --- a/src/pacman/util.c +++ b/src/pacman/util.c @@ -42,6 +42,34 @@ /* pacman */ #include "util.h" #include "conf.h" +#include "callback.h" + + +int trans_init(pmtranstype_t type, pmtransflag_t flags) +{ + if(alpm_trans_init(type, flags, cb_trans_evt, + cb_trans_conv, cb_trans_progress) == -1) { + /* TODO: error messages should be in the front end, not the back */ This comment is a bit stale, we can probably remove it. Printing error messages in the backend is wrong, but having a message callback is fine. I think this one is my fault a while back.

+ fprintf(stderr, _("error: failed to init transaction (%s)\n"), + alpm_strerrorlast()); + if(pm_errno == PM_ERR_HANDLE_LOCK) { + fprintf(stderr, _(" if you're sure a package manager is not already\n" + " running, you can remove %s\n"), alpm_option_get_lockfile()); + } + return(-1); + } + return(0); +} + +int trans_release() +{ + if(alpm_trans_release() == -1) { + fprintf(stderr, _("error: failed to release transaction (%s)\n"), + alpm_strerrorlast()); + return(-1); + } + return(0); +}

int needs_transaction() { diff --git a/src/pacman/util.h b/src/pacman/util.h index f2facbf..722e4ab 100644 --- a/src/pacman/util.h +++ b/src/pacman/util.h @@ -36,6 +36,8 @@ /* update speed for the fill_progress based functions */ #define UPDATE_SPEED_SEC 0.2f

+int trans_init(pmtranstype_t type, pmtransflag_t flags); +int trans_release(); int needs_transaction(); int getcols(); int makepath(const char *path); -- 1.5.5.1

_______________________________________________ pacman-dev mailing list pacman-dev@archlinux.org http://archlinux.org/mailman/listinfo/pacman-dev