Signed-off-by: Allan McRae <allan@archlinux.org> --- INSTALL | 223 +++++++++++++++----- build-aux/compile | 347 +++++++++++++++++++++++++++++++ build-aux/config.guess | 407 +++++++++++++++++++++---------------- build-aux/config.sub | 237 ++++++++++++--------- build-aux/depcomp | 531 +++++++++++++++++++++++++++++++----------------- build-aux/install-sh | 29 +-- build-aux/mkinstalldirs | 4 +- 7 files changed, 1259 insertions(+), 519 deletions(-) create mode 100755 build-aux/compile diff --git a/INSTALL b/INSTALL index 814118a..007e939 100644 --- a/INSTALL +++ b/INSTALL @@ -1,28 +1,25 @@ Installation Instructions ************************* -Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005, -2006 Free Software Foundation, Inc. +Copyright (C) 1994-1996, 1999-2002, 2004-2013 Free Software Foundation, +Inc. -This file is free documentation; the Free Software Foundation gives -unlimited permission to copy, distribute and modify it. + Copying and distribution of this file, with or without modification, +are permitted in any medium without royalty provided the copyright +notice and this notice are preserved. This file is offered as-is, +without warranty of any kind. Basic Installation ================== -You will need to build and install two libraries before you can -properly build pacman. - -libarchive -http://code.google.com/p/libarchive/ - -libcurl -http://curl.haxx.se/libcurl/ - -Briefly, the shell commands `./configure; make; make install' should + Briefly, the shell commands `./configure; make; make install' should configure, build, and install this package. The following -instructions are generic. Run `./configure --help` for specific -options. +more-detailed instructions are generic; see the `README' file for +instructions specific to this package. Some packages provide this +`INSTALL' file but do not implement all of the features documented +below. The lack of an optional feature in a given package is not +necessarily a bug. More recommendations for GNU packages can be found +in *note Makefile Conventions: (standards)Makefile Conventions. The `configure' shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses @@ -51,7 +48,7 @@ may remove or edit it. you want to change it or regenerate `configure' using a newer version of `autoconf'. -The simplest way to compile this package is: + The simplest way to compile this package is: 1. `cd' to the directory containing the package's source code and type `./configure' to configure the package for your system. @@ -62,12 +59,22 @@ The simplest way to compile this package is: 2. Type `make' to compile the package. 3. Optionally, type `make check' to run any self-tests that come with - the package. + the package, generally using the just-built uninstalled binaries. 4. Type `make install' to install the programs and any data files and - documentation. - - 5. You can remove the program binaries and object files from the + documentation. When installing into a prefix owned by root, it is + recommended that the package be configured and built as a regular + user, and only the `make install' phase executed with root + privileges. + + 5. Optionally, type `make installcheck' to repeat any self-tests, but + this time using the binaries in their final installed location. + This target does not install anything. Running this target as a + regular user, particularly if the prior `make install' required + root privileges, verifies that the installation completed + correctly. + + 6. You can remove the program binaries and object files from the source code directory by typing `make clean'. To also remove the files that `configure' created (so you can compile the package for a different kind of computer), type `make distclean'. There is @@ -76,12 +83,22 @@ The simplest way to compile this package is: all sorts of other programs in order to regenerate files that came with the distribution. + 7. Often, you can also type `make uninstall' to remove the installed + files again. In practice, not all packages have tested that + uninstallation works correctly, even though it is required by the + GNU Coding Standards. + + 8. Some packages, particularly those that use Automake, provide `make + distcheck', which can by used by developers to test that all other + targets like `make install' and `make uninstall' work correctly. + This target is generally not run by end users. + Compilers and Options ===================== -Some systems require unusual options for compilation or linking that the -`configure' script does not know about. Run `./configure --help' for -details on some of the pertinent environment variables. + Some systems require unusual options for compilation or linking that +the `configure' script does not know about. Run `./configure --help' +for details on some of the pertinent environment variables. You can give `configure' initial values for configuration parameters by setting variables in the command line or in the environment. Here @@ -94,25 +111,41 @@ is an example: Compiling For Multiple Architectures ==================================== -You can compile the package for more than one kind of computer at the + You can compile the package for more than one kind of computer at the same time, by placing the object files for each architecture in their own directory. To do this, you can use GNU `make'. `cd' to the directory where you want the object files and executables to go and run the `configure' script. `configure' automatically checks for the -source code in the directory that `configure' is in and in `..'. +source code in the directory that `configure' is in and in `..'. This +is known as a "VPATH" build. With a non-GNU `make', it is safer to compile the package for one architecture at a time in the source code directory. After you have installed the package for one architecture, use `make distclean' before reconfiguring for another architecture. + On MacOS X 10.5 and later systems, you can create libraries and +executables that work on multiple system types--known as "fat" or +"universal" binaries--by specifying multiple `-arch' options to the +compiler but only a single `-arch' option to the preprocessor. Like +this: + + ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ + CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ + CPP="gcc -E" CXXCPP="g++ -E" + + This is not guaranteed to produce working output in all cases, you +may have to build one architecture at a time and combine the results +using the `lipo' tool if you have problems. + Installation Names ================== -By default, `make install' installs the package's commands under + By default, `make install' installs the package's commands under `/usr/local/bin', include files under `/usr/local/include', etc. You can specify an installation prefix other than `/usr/local' by giving -`configure' the option `--prefix=PREFIX'. +`configure' the option `--prefix=PREFIX', where PREFIX must be an +absolute file name. You can specify separate installation prefixes for architecture-specific files and architecture-independent files. If you @@ -123,16 +156,47 @@ Documentation and other data files still use the regular prefix. In addition, if you use an unusual directory layout you can give options like `--bindir=DIR' to specify different values for particular kinds of files. Run `configure --help' for a list of the directories -you can set and what kinds of files go in them. +you can set and what kinds of files go in them. In general, the +default for these options is expressed in terms of `${prefix}', so that +specifying just `--prefix' will affect all of the other directory +specifications that were not explicitly provided. + + The most portable way to affect installation locations is to pass the +correct locations to `configure'; however, many packages provide one or +both of the following shortcuts of passing variable assignments to the +`make install' command line to change installation locations without +having to reconfigure or recompile. + + The first method involves providing an override variable for each +affected directory. For example, `make install +prefix=/alternate/directory' will choose an alternate location for all +directory configuration variables that were expressed in terms of +`${prefix}'. Any directories that were specified during `configure', +but not in terms of `${prefix}', must each be overridden at install +time for the entire installation to be relocated. The approach of +makefile variable overrides for each directory variable is required by +the GNU Coding Standards, and ideally causes no recompilation. +However, some platforms have known limitations with the semantics of +shared libraries that end up requiring recompilation when using this +method, particularly noticeable in packages that use GNU Libtool. + + The second method involves providing the `DESTDIR' variable. For +example, `make install DESTDIR=/alternate/directory' will prepend +`/alternate/directory' before all installation names. The approach of +`DESTDIR' overrides is not required by the GNU Coding Standards, and +does not work on platforms that have drive letters. On the other hand, +it does better at avoiding recompilation issues, and works well even +when some directory options were not specified in terms of `${prefix}' +at `configure' time. + +Optional Features +================= If the package supports it, you can cause programs to be installed with an extra prefix or suffix on their names by giving `configure' the option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. -Optional Features -================= - -Some packages pay attention to `--enable-FEATURE' options to + Some packages pay attention to `--enable-FEATURE' options to `configure', where FEATURE indicates an optional part of the package. They may also pay attention to `--with-PACKAGE' options, where PACKAGE is something like `gnu-as' or `x' (for the X Window System). The @@ -144,14 +208,58 @@ find the X include and library files automatically, but if it doesn't, you can use the `configure' options `--x-includes=DIR' and `--x-libraries=DIR' to specify their locations. + Some packages offer the ability to configure how verbose the +execution of `make' will be. For these packages, running `./configure +--enable-silent-rules' sets the default to minimal output, which can be +overridden with `make V=1'; while running `./configure +--disable-silent-rules' sets the default to verbose, which can be +overridden with `make V=0'. + +Particular systems +================== + + On HP-UX, the default C compiler is not ANSI C compatible. If GNU +CC is not installed, it is recommended to use the following options in +order to use an ANSI C compiler: + + ./configure CC="cc -Ae -D_XOPEN_SOURCE=500" + +and if that doesn't work, install pre-built binaries of GCC for HP-UX. + + HP-UX `make' updates targets which have the same time stamps as +their prerequisites, which makes it generally unusable when shipped +generated files such as `configure' are involved. Use GNU `make' +instead. + + On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot +parse its `<wchar.h>' header file. The option `-nodtk' can be used as +a workaround. If GNU CC is not installed, it is therefore recommended +to try + + ./configure CC="cc" + +and if that doesn't work, try + + ./configure CC="cc -nodtk" + + On Solaris, don't put `/usr/ucb' early in your `PATH'. This +directory contains several dysfunctional programs; working variants of +these programs are available in `/usr/bin'. So, if you need `/usr/ucb' +in your `PATH', put it _after_ `/usr/bin'. + + On Haiku, software installed for all users goes in `/boot/common', +not `/usr/local'. It is recommended to use the following options: + + ./configure --prefix=/boot/common + Specifying the System Type ========================== -There may be some features `configure' cannot figure out automatically, -but needs to determine by the type of machine the package will run on. -Usually, assuming the package is built to be run on the _same_ -architectures, `configure' can figure that out, but if it prints a -message saying it cannot guess the machine type, give it the + There may be some features `configure' cannot figure out +automatically, but needs to determine by the type of machine the package +will run on. Usually, assuming the package is built to be run on the +_same_ architectures, `configure' can figure that out, but if it prints +a message saying it cannot guess the machine type, give it the `--build=TYPE' option. TYPE can either be a short name for the system type, such as `sun4', or a canonical name which has the form: @@ -159,7 +267,8 @@ type, such as `sun4', or a canonical name which has the form: where SYSTEM can have one of these forms: - OS KERNEL-OS + OS + KERNEL-OS See the file `config.sub' for the possible values of each field. If `config.sub' isn't included in this package, then this package doesn't @@ -177,9 +286,9 @@ eventually be run) with `--host=TYPE'. Sharing Defaults ================ -If you want to set default values for `configure' scripts to share, you -can create a site shell script called `config.site' that gives default -values for variables like `CC', `cache_file', and `prefix'. + If you want to set default values for `configure' scripts to share, +you can create a site shell script called `config.site' that gives +default values for variables like `CC', `cache_file', and `prefix'. `configure' looks for `PREFIX/share/config.site' if it exists, then `PREFIX/etc/config.site' if it exists. Or, you can set the `CONFIG_SITE' environment variable to the location of the site script. @@ -188,7 +297,7 @@ A warning: not all `configure' scripts look for a site script. Defining Variables ================== -Variables not defined in a site shell script can be set in the + Variables not defined in a site shell script can be set in the environment passed to `configure'. However, some packages may run configure again during the build, and the customized values of these variables may be lost. In order to avoid this problem, you should set @@ -200,18 +309,27 @@ causes the specified `gcc' to be used as the C compiler (unless it is overridden in the site shell script). Unfortunately, this technique does not work for `CONFIG_SHELL' due to -an Autoconf bug. Until the bug is fixed you can use this workaround: +an Autoconf limitation. Until the limitation is lifted, you can use +this workaround: - CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash + CONFIG_SHELL=/bin/bash ./configure CONFIG_SHELL=/bin/bash `configure' Invocation ====================== -`configure' recognizes the following options to control how it operates. + `configure' recognizes the following options to control how it +operates. `--help' `-h' - Print a summary of the options to `configure', and exit. + Print a summary of all of the options to `configure', and exit. + +`--help=short' +`--help=recursive' + Print a summary of the options unique to this package's + `configure', and exit. The `short' variant lists options used + only in the top level, while the `recursive' variant lists options + also present in any nested packages. `--version' `-V' @@ -238,6 +356,15 @@ an Autoconf bug. Until the bug is fixed you can use this workaround: Look for the package's source code in directory DIR. Usually `configure' can determine that directory automatically. +`--prefix=DIR' + Use DIR as the installation prefix. *note Installation Names:: + for more details, including other options available for fine-tuning + the installation locations. + +`--no-create' +`-n' + Run the configure checks, but stop before creating any output + files. + `configure' also accepts some other, not widely useful, options. Run `configure --help' for more details. - diff --git a/build-aux/compile b/build-aux/compile new file mode 100755 index 0000000..531136b --- /dev/null +++ b/build-aux/compile @@ -0,0 +1,347 @@ +#! /bin/sh +# Wrapper for compilers which do not understand '-c -o'. + +scriptversion=2012-10-14.11; # UTC + +# Copyright (C) 1999-2013 Free Software Foundation, Inc. +# Written by Tom Tromey <tromey@cygnus.com>. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# This file is maintained in Automake, please report +# bugs to <bug-automake@gnu.org> or send patches to +# <automake-patches@gnu.org>. + +nl=' +' + +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent tools from complaining about whitespace usage. +IFS=" "" $nl" + +file_conv= + +# func_file_conv build_file lazy +# Convert a $build file to $host form and store it in $file +# Currently only supports Windows hosts. If the determined conversion +# type is listed in (the comma separated) LAZY, no conversion will +# take place. +func_file_conv () +{ + file=$1 + case $file in + / | /[!/]*) # absolute file, and not a UNC file + if test -z "$file_conv"; then + # lazily determine how to convert abs files + case `uname -s` in + MINGW*) + file_conv=mingw + ;; + CYGWIN*) + file_conv=cygwin + ;; + *) + file_conv=wine + ;; + esac + fi + case $file_conv/,$2, in + *,$file_conv,*) + ;; + mingw/*) + file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'` + ;; + cygwin/*) + file=`cygpath -m "$file" || echo "$file"` + ;; + wine/*) + file=`winepath -w "$file" || echo "$file"` + ;; + esac + ;; + esac +} + +# func_cl_dashL linkdir +# Make cl look for libraries in LINKDIR +func_cl_dashL () +{ + func_file_conv "$1" + if test -z "$lib_path"; then + lib_path=$file + else + lib_path="$lib_path;$file" + fi + linker_opts="$linker_opts -LIBPATH:$file" +} + +# func_cl_dashl library +# Do a library search-path lookup for cl +func_cl_dashl () +{ + lib=$1 + found=no + save_IFS=$IFS + IFS=';' + for dir in $lib_path $LIB + do + IFS=$save_IFS + if $shared && test -f "$dir/$lib.dll.lib"; then + found=yes + lib=$dir/$lib.dll.lib + break + fi + if test -f "$dir/$lib.lib"; then + found=yes + lib=$dir/$lib.lib + break + fi + if test -f "$dir/lib$lib.a"; then + found=yes + lib=$dir/lib$lib.a + break + fi + done + IFS=$save_IFS + + if test "$found" != yes; then + lib=$lib.lib + fi +} + +# func_cl_wrapper cl arg... +# Adjust compile command to suit cl +func_cl_wrapper () +{ + # Assume a capable shell + lib_path= + shared=: + linker_opts= + for arg + do + if test -n "$eat"; then + eat= + else + case $1 in + -o) + # configure might choose to run compile as 'compile cc -o foo foo.c'. + eat=1 + case $2 in + *.o | *.[oO][bB][jJ]) + func_file_conv "$2" + set x "$@" -Fo"$file" + shift + ;; + *) + func_file_conv "$2" + set x "$@" -Fe"$file" + shift + ;; + esac + ;; + -I) + eat=1 + func_file_conv "$2" mingw + set x "$@" -I"$file" + shift + ;; + -I*) + func_file_conv "${1#-I}" mingw + set x "$@" -I"$file" + shift + ;; + -l) + eat=1 + func_cl_dashl "$2" + set x "$@" "$lib" + shift + ;; + -l*) + func_cl_dashl "${1#-l}" + set x "$@" "$lib" + shift + ;; + -L) + eat=1 + func_cl_dashL "$2" + ;; + -L*) + func_cl_dashL "${1#-L}" + ;; + -static) + shared=false + ;; + -Wl,*) + arg=${1#-Wl,} + save_ifs="$IFS"; IFS=',' + for flag in $arg; do + IFS="$save_ifs" + linker_opts="$linker_opts $flag" + done + IFS="$save_ifs" + ;; + -Xlinker) + eat=1 + linker_opts="$linker_opts $2" + ;; + -*) + set x "$@" "$1" + shift + ;; + *.cc | *.CC | *.cxx | *.CXX | *.[cC]++) + func_file_conv "$1" + set x "$@" -Tp"$file" + shift + ;; + *.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO]) + func_file_conv "$1" mingw + set x "$@" "$file" + shift + ;; + *) + set x "$@" "$1" + shift + ;; + esac + fi + shift + done + if test -n "$linker_opts"; then + linker_opts="-link$linker_opts" + fi + exec "$@" $linker_opts + exit 1 +} + +eat= + +case $1 in + '') + echo "$0: No command. Try '$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: compile [--help] [--version] PROGRAM [ARGS] + +Wrapper for compilers which do not understand '-c -o'. +Remove '-o dest.o' from ARGS, run PROGRAM with the remaining +arguments, and rename the output as expected. + +If you are trying to build a whole package this is not the +right script to run: please start by reading the file 'INSTALL'. + +Report bugs to <bug-automake@gnu.org>. +EOF + exit $? + ;; + -v | --v*) + echo "compile $scriptversion" + exit $? + ;; + cl | *[/\\]cl | cl.exe | *[/\\]cl.exe ) + func_cl_wrapper "$@" # Doesn't return... + ;; +esac + +ofile= +cfile= + +for arg +do + if test -n "$eat"; then + eat= + else + case $1 in + -o) + # configure might choose to run compile as 'compile cc -o foo foo.c'. + # So we strip '-o arg' only if arg is an object. + eat=1 + case $2 in + *.o | *.obj) + ofile=$2 + ;; + *) + set x "$@" -o "$2" + shift + ;; + esac + ;; + *.c) + cfile=$1 + set x "$@" "$1" + shift + ;; + *) + set x "$@" "$1" + shift + ;; + esac + fi + shift +done + +if test -z "$ofile" || test -z "$cfile"; then + # If no '-o' option was seen then we might have been invoked from a + # pattern rule where we don't need one. That is ok -- this is a + # normal compilation that the losing compiler can handle. If no + # '.c' file was seen then we are probably linking. That is also + # ok. + exec "$@" +fi + +# Name of file we expect compiler to create. +cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'` + +# Create the lock directory. +# Note: use '[/\\:.-]' here to ensure that we don't use the same name +# that we are using for the .o file. Also, base the name on the expected +# object file name, since that is what matters with a parallel build. +lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d +while true; do + if mkdir "$lockdir" >/dev/null 2>&1; then + break + fi + sleep 1 +done +# FIXME: race condition here if user kills between mkdir and trap. +trap "rmdir '$lockdir'; exit 1" 1 2 15 + +# Run the compile. +"$@" +ret=$? + +if test -f "$cofile"; then + test "$cofile" = "$ofile" || mv "$cofile" "$ofile" +elif test -f "${cofile}bj"; then + test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile" +fi + +rmdir "$lockdir" +exit $ret + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff --git a/build-aux/config.guess b/build-aux/config.guess index 2852378..b79252d 100755 --- a/build-aux/config.guess +++ b/build-aux/config.guess @@ -1,14 +1,12 @@ #! /bin/sh # Attempt to guess a canonical system name. -# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 -# Free Software Foundation, Inc. +# Copyright 1992-2013 Free Software Foundation, Inc. -timestamp='2010-08-21' +timestamp='2013-06-10' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or +# the Free Software Foundation; either version 3 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but @@ -17,26 +15,22 @@ timestamp='2010-08-21' # General Public License for more details. # # You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA -# 02110-1301, USA. +# along with this program; if not, see <http://www.gnu.org/licenses/>. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - - -# Originally written by Per Bothner. Please send patches (context -# diff format) to <config-patches@gnu.org> and include a ChangeLog -# entry. +# the same distribution terms that you use for the rest of that +# program. This Exception is an additional permission under section 7 +# of the GNU General Public License, version 3 ("GPLv3"). # -# This script attempts to guess a canonical system name similar to -# config.sub. If it succeeds, it prints the system name on stdout, and -# exits with 0. Otherwise, it exits with 1. +# Originally written by Per Bothner. # # You can get the latest version of this script from: # http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess... +# +# Please send patches with a ChangeLog entry to config-patches@gnu.org. + me=`echo "$0" | sed -e 's,.*/,,'` @@ -56,9 +50,7 @@ version="\ GNU config.guess ($timestamp) Originally written by Per Bothner. -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, -2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free -Software Foundation, Inc. +Copyright 1992-2013 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." @@ -92,7 +84,7 @@ if test $# != 0; then exit 1 fi -trap 'exit 1' HUP INT TERM +trap 'exit 1' 1 2 15 # CC_FOR_BUILD -- compiler used by this script. Note that the use of a # compiler to aid in system detection is discouraged as it requires @@ -106,7 +98,7 @@ trap 'exit 1' HUP INT TERM set_cc_for_build=' trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; -trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" HUP INT PIPE TERM ; +trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; : ${TMPDIR=/tmp} ; { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || @@ -140,12 +132,33 @@ UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown +case "${UNAME_SYSTEM}" in +Linux|GNU|GNU/*) + # If the system lacks a compiler, then just pick glibc. + # We could probably try harder. + LIBC=gnu + + eval $set_cc_for_build + cat <<-EOF > $dummy.c + #include <features.h> + #if defined(__UCLIBC__) + LIBC=uclibc + #elif defined(__dietlibc__) + LIBC=dietlibc + #else + LIBC=gnu + #endif + EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'` + ;; +esac + # Note: order is significant - the case branches are not exclusive. case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in *:NetBSD:*:*) # NetBSD (nbsd) targets should (where applicable) match one or - # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, + # more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*, # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently # switched to ELF, *-*-netbsd* would select the old # object file format. This provides both forward @@ -181,7 +194,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in fi ;; *) - os=netbsd + os=netbsd ;; esac # The OS release @@ -202,6 +215,10 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. echo "${machine}-${os}${release}" exit ;; + *:Bitrig:*:*) + UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'` + echo ${UNAME_MACHINE_ARCH}-unknown-bitrig${UNAME_RELEASE} + exit ;; *:OpenBSD:*:*) UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} @@ -224,7 +241,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` ;; *5.*) - UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` ;; esac # According to Compaq, /usr/sbin/psrinfo has been available on @@ -270,7 +287,10 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in # A Xn.n version is an unreleased experimental baselevel. # 1.2 uses "1.2" for uname -r. echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` - exit ;; + # Reset EXIT trap before exiting to avoid spurious non-zero exit code. + exitcode=$? + trap '' 0 + exit $exitcode ;; Alpha\ *:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # Should we change UNAME_MACHINE based on the output of uname instead @@ -296,12 +316,12 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in echo s390-ibm-zvmoe exit ;; *:OS400:*:*) - echo powerpc-ibm-os400 + echo powerpc-ibm-os400 exit ;; arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) echo arm-acorn-riscix${UNAME_RELEASE} exit ;; - arm:riscos:*:*|arm:RISCOS:*:*) + arm*:riscos:*:*|arm*:RISCOS:*:*) echo arm-unknown-riscos exit ;; SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) @@ -395,23 +415,23 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in # MiNT. But MiNT is downward compatible to TOS, so this should # be no problem. atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} + echo m68k-atari-mint${UNAME_RELEASE} exit ;; atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} - exit ;; + exit ;; *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} + echo m68k-atari-mint${UNAME_RELEASE} exit ;; milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) - echo m68k-milan-mint${UNAME_RELEASE} - exit ;; + echo m68k-milan-mint${UNAME_RELEASE} + exit ;; hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) - echo m68k-hades-mint${UNAME_RELEASE} - exit ;; + echo m68k-hades-mint${UNAME_RELEASE} + exit ;; *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) - echo m68k-unknown-mint${UNAME_RELEASE} - exit ;; + echo m68k-unknown-mint${UNAME_RELEASE} + exit ;; m68k:machten:*:*) echo m68k-apple-machten${UNAME_RELEASE} exit ;; @@ -481,8 +501,8 @@ EOF echo m88k-motorola-sysv3 exit ;; AViiON:dgux:*:*) - # DG/UX returns AViiON for all architectures - UNAME_PROCESSOR=`/usr/bin/uname -p` + # DG/UX returns AViiON for all architectures + UNAME_PROCESSOR=`/usr/bin/uname -p` if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] then if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ @@ -495,7 +515,7 @@ EOF else echo i586-dg-dgux${UNAME_RELEASE} fi - exit ;; + exit ;; M88*:DolphinOS:*:*) # DolphinOS (SVR3) echo m88k-dolphin-sysv3 exit ;; @@ -595,52 +615,52 @@ EOF 9000/[678][0-9][0-9]) if [ -x /usr/bin/getconf ]; then sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` - sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` - case "${sc_cpu_version}" in - 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 - 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 - 532) # CPU_PA_RISC2_0 - case "${sc_kernel_bits}" in - 32) HP_ARCH="hppa2.0n" ;; - 64) HP_ARCH="hppa2.0w" ;; + sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` + case "${sc_cpu_version}" in + 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 + 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 + 532) # CPU_PA_RISC2_0 + case "${sc_kernel_bits}" in + 32) HP_ARCH="hppa2.0n" ;; + 64) HP_ARCH="hppa2.0w" ;; '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 - esac ;; - esac + esac ;; + esac fi if [ "${HP_ARCH}" = "" ]; then eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c + sed 's/^ //' << EOF >$dummy.c - #define _HPUX_SOURCE - #include <stdlib.h> - #include <unistd.h> + #define _HPUX_SOURCE + #include <stdlib.h> + #include <unistd.h> - int main () - { - #if defined(_SC_KERNEL_BITS) - long bits = sysconf(_SC_KERNEL_BITS); - #endif - long cpu = sysconf (_SC_CPU_VERSION); + int main () + { + #if defined(_SC_KERNEL_BITS) + long bits = sysconf(_SC_KERNEL_BITS); + #endif + long cpu = sysconf (_SC_CPU_VERSION); - switch (cpu) - { - case CPU_PA_RISC1_0: puts ("hppa1.0"); break; - case CPU_PA_RISC1_1: puts ("hppa1.1"); break; - case CPU_PA_RISC2_0: - #if defined(_SC_KERNEL_BITS) - switch (bits) - { - case 64: puts ("hppa2.0w"); break; - case 32: puts ("hppa2.0n"); break; - default: puts ("hppa2.0"); break; - } break; - #else /* !defined(_SC_KERNEL_BITS) */ - puts ("hppa2.0"); break; - #endif - default: puts ("hppa1.0"); break; - } - exit (0); - } + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1"); break; + case CPU_PA_RISC2_0: + #if defined(_SC_KERNEL_BITS) + switch (bits) + { + case 64: puts ("hppa2.0w"); break; + case 32: puts ("hppa2.0n"); break; + default: puts ("hppa2.0"); break; + } break; + #else /* !defined(_SC_KERNEL_BITS) */ + puts ("hppa2.0"); break; + #endif + default: puts ("hppa1.0"); break; + } + exit (0); + } EOF (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` test -z "$HP_ARCH" && HP_ARCH=hppa @@ -731,22 +751,22 @@ EOF exit ;; C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) echo c1-convex-bsd - exit ;; + exit ;; C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi - exit ;; + exit ;; C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) echo c34-convex-bsd - exit ;; + exit ;; C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) echo c38-convex-bsd - exit ;; + exit ;; C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) echo c4-convex-bsd - exit ;; + exit ;; CRAY*Y-MP:*:*:*) echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; @@ -770,14 +790,14 @@ EOF exit ;; F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` - FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` - FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` - echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" - exit ;; + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` + echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; 5000:UNIX_System_V:4.*:*) - FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` - FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` - echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` + echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" exit ;; i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} @@ -789,30 +809,35 @@ EOF echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} exit ;; *:FreeBSD:*:*) - case ${UNAME_MACHINE} in - pc98) - echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + UNAME_PROCESSOR=`/usr/bin/uname -p` + case ${UNAME_PROCESSOR} in amd64) echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; *) - echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; esac exit ;; i*:CYGWIN*:*) echo ${UNAME_MACHINE}-pc-cygwin exit ;; + *:MINGW64*:*) + echo ${UNAME_MACHINE}-pc-mingw64 + exit ;; *:MINGW*:*) echo ${UNAME_MACHINE}-pc-mingw32 exit ;; + i*:MSYS*:*) + echo ${UNAME_MACHINE}-pc-msys + exit ;; i*:windows32*:*) - # uname -m includes "-pc" on this system. - echo ${UNAME_MACHINE}-mingw32 + # uname -m includes "-pc" on this system. + echo ${UNAME_MACHINE}-mingw32 exit ;; i*:PW*:*) echo ${UNAME_MACHINE}-pc-pw32 exit ;; *:Interix*:*) - case ${UNAME_MACHINE} in + case ${UNAME_MACHINE} in x86) echo i586-pc-interix${UNAME_RELEASE} exit ;; @@ -849,15 +874,22 @@ EOF exit ;; *:GNU:*:*) # the GNU system - echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` + echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-${LIBC}`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` exit ;; *:GNU/*:*:*) # other systems with GNU libc and userland - echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu + echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-${LIBC} exit ;; i*86:Minix:*:*) echo ${UNAME_MACHINE}-pc-minix exit ;; + aarch64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + aarch64_be:Linux:*:*) + UNAME_MACHINE=aarch64_be + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; alpha:Linux:*:*) case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in EV5) UNAME_MACHINE=alphaev5 ;; @@ -867,52 +899,56 @@ EOF EV6) UNAME_MACHINE=alphaev6 ;; EV67) UNAME_MACHINE=alphaev67 ;; EV68*) UNAME_MACHINE=alphaev68 ;; - esac + esac objdump --private-headers /bin/sh | grep -q ld.so.1 - if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi - echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} + if test "$?" = 0 ; then LIBC="gnulibc1" ; fi + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + arc:Linux:*:* | arceb:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; arm*:Linux:*:*) eval $set_cc_for_build if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ | grep -q __ARM_EABI__ then - echo ${UNAME_MACHINE}-unknown-linux-gnu + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} else - echo ${UNAME_MACHINE}-unknown-linux-gnueabi + if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ARM_PCS_VFP + then + echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabi + else + echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabihf + fi fi exit ;; avr32*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; cris:Linux:*:*) - echo cris-axis-linux-gnu + echo ${UNAME_MACHINE}-axis-linux-${LIBC} exit ;; crisv32:Linux:*:*) - echo crisv32-axis-linux-gnu + echo ${UNAME_MACHINE}-axis-linux-${LIBC} exit ;; frv:Linux:*:*) - echo frv-unknown-linux-gnu + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; + hexagon:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; i*86:Linux:*:*) - LIBC=gnu - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #ifdef __dietlibc__ - LIBC=dietlibc - #endif -EOF - eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'` - echo "${UNAME_MACHINE}-pc-linux-${LIBC}" + echo ${UNAME_MACHINE}-pc-linux-${LIBC} exit ;; ia64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; m32r*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; m68*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; mips:Linux:*:* | mips64:Linux:*:*) eval $set_cc_for_build @@ -931,54 +967,63 @@ EOF #endif EOF eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'` - test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } + test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; } ;; + or1k:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + exit ;; or32:Linux:*:*) - echo or32-unknown-linux-gnu + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; padre:Linux:*:*) - echo sparc-unknown-linux-gnu + echo sparc-unknown-linux-${LIBC} exit ;; parisc64:Linux:*:* | hppa64:Linux:*:*) - echo hppa64-unknown-linux-gnu + echo hppa64-unknown-linux-${LIBC} exit ;; parisc:Linux:*:* | hppa:Linux:*:*) # Look for CPU level case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in - PA7*) echo hppa1.1-unknown-linux-gnu ;; - PA8*) echo hppa2.0-unknown-linux-gnu ;; - *) echo hppa-unknown-linux-gnu ;; + PA7*) echo hppa1.1-unknown-linux-${LIBC} ;; + PA8*) echo hppa2.0-unknown-linux-${LIBC} ;; + *) echo hppa-unknown-linux-${LIBC} ;; esac exit ;; ppc64:Linux:*:*) - echo powerpc64-unknown-linux-gnu + echo powerpc64-unknown-linux-${LIBC} exit ;; ppc:Linux:*:*) - echo powerpc-unknown-linux-gnu + echo powerpc-unknown-linux-${LIBC} + exit ;; + ppc64le:Linux:*:*) + echo powerpc64le-unknown-linux-${LIBC} + exit ;; + ppcle:Linux:*:*) + echo powerpcle-unknown-linux-${LIBC} exit ;; s390:Linux:*:* | s390x:Linux:*:*) - echo ${UNAME_MACHINE}-ibm-linux + echo ${UNAME_MACHINE}-ibm-linux-${LIBC} exit ;; sh64*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; sh*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; sparc:Linux:*:* | sparc64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; tile*:Linux:*:*) - echo ${UNAME_MACHINE}-tilera-linux-gnu + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; vax:Linux:*:*) - echo ${UNAME_MACHINE}-dec-linux-gnu + echo ${UNAME_MACHINE}-dec-linux-${LIBC} exit ;; x86_64:Linux:*:*) - echo x86_64-unknown-linux-gnu + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; xtensa*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu + echo ${UNAME_MACHINE}-unknown-linux-${LIBC} exit ;; i*86:DYNIX/ptx:4*:*) # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. @@ -987,11 +1032,11 @@ EOF echo i386-sequent-sysv4 exit ;; i*86:UNIX_SV:4.2MP:2.*) - # Unixware is an offshoot of SVR4, but it has its own version - # number series starting with 2... - # I am not positive that other SVR4 systems won't match this, + # Unixware is an offshoot of SVR4, but it has its own version + # number series starting with 2... + # I am not positive that other SVR4 systems won't match this, # I just have to hope. -- rms. - # Use sysv4.2uw... so that sysv4* matches it. + # Use sysv4.2uw... so that sysv4* matches it. echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} exit ;; i*86:OS/2:*:*) @@ -1023,7 +1068,7 @@ EOF fi exit ;; i*86:*:5:[678]*) - # UnixWare 7.x, OpenUNIX and OpenServer 6. + # UnixWare 7.x, OpenUNIX and OpenServer 6. case `/bin/uname -X | grep "^Machine"` in *486*) UNAME_MACHINE=i486 ;; *Pentium) UNAME_MACHINE=i586 ;; @@ -1051,13 +1096,13 @@ EOF exit ;; pc:*:*:*) # Left here for compatibility: - # uname -m prints for DJGPP always 'pc', but it prints nothing about - # the processor, so we play safe by assuming i586. + # uname -m prints for DJGPP always 'pc', but it prints nothing about + # the processor, so we play safe by assuming i586. # Note: whatever this is, it MUST be the same as what config.sub # prints for the "djgpp" host, or else GDB configury will decide that # this is a cross-build. echo i586-pc-msdosdjgpp - exit ;; + exit ;; Intel:Mach:3*:*) echo i386-pc-mach3 exit ;; @@ -1092,8 +1137,8 @@ EOF /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4; exit; } ;; + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4; exit; } ;; NCR*:*:4.2:* | MPRAS*:*:4.2:*) OS_REL='.3' test -r /etc/.relid \ @@ -1136,10 +1181,10 @@ EOF echo ns32k-sni-sysv fi exit ;; - PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort - # says <Richard.M.Bartel@ccMail.Census.GOV> - echo i586-unisys-sysv4 - exit ;; + PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort + # says <Richard.M.Bartel@ccMail.Census.GOV> + echo i586-unisys-sysv4 + exit ;; *:UNIX_System_V:4*:FTX*) # From Gerald Hewes <hewes@openmarket.com>. # How about differentiating between stratus architectures? -djm @@ -1165,11 +1210,11 @@ EOF exit ;; R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) if [ -d /usr/nec ]; then - echo mips-nec-sysv${UNAME_RELEASE} + echo mips-nec-sysv${UNAME_RELEASE} else - echo mips-unknown-sysv${UNAME_RELEASE} + echo mips-unknown-sysv${UNAME_RELEASE} fi - exit ;; + exit ;; BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. echo powerpc-be-beos exit ;; @@ -1182,6 +1227,9 @@ EOF BePC:Haiku:*:*) # Haiku running on Intel PC compatible. echo i586-pc-haiku exit ;; + x86_64:Haiku:*:*) + echo x86_64-unknown-haiku + exit ;; SX-4:SUPER-UX:*:*) echo sx4-nec-superux${UNAME_RELEASE} exit ;; @@ -1208,19 +1256,21 @@ EOF exit ;; *:Darwin:*:*) UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown - case $UNAME_PROCESSOR in - i386) - eval $set_cc_for_build - if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then - if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \ - (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ - grep IS_64BIT_ARCH >/dev/null - then - UNAME_PROCESSOR="x86_64" - fi - fi ;; - unknown) UNAME_PROCESSOR=powerpc ;; - esac + eval $set_cc_for_build + if test "$UNAME_PROCESSOR" = unknown ; then + UNAME_PROCESSOR=powerpc + fi + if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then + if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \ + (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_64BIT_ARCH >/dev/null + then + case $UNAME_PROCESSOR in + i386) UNAME_PROCESSOR=x86_64 ;; + powerpc) UNAME_PROCESSOR=powerpc64 ;; + esac + fi + fi echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} exit ;; *:procnto*:*:* | *:QNX:[0123456789]*:*) @@ -1234,7 +1284,10 @@ EOF *:QNX:*:4*) echo i386-pc-qnx exit ;; - NSE-?:NONSTOP_KERNEL:*:*) + NEO-?:NONSTOP_KERNEL:*:*) + echo neo-tandem-nsk${UNAME_RELEASE} + exit ;; + NSE-*:NONSTOP_KERNEL:*:*) echo nse-tandem-nsk${UNAME_RELEASE} exit ;; NSR-?:NONSTOP_KERNEL:*:*) @@ -1279,13 +1332,13 @@ EOF echo pdp10-unknown-its exit ;; SEI:*:*:SEIUX) - echo mips-sei-seiux${UNAME_RELEASE} + echo mips-sei-seiux${UNAME_RELEASE} exit ;; *:DragonFly:*:*) echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` exit ;; *:*VMS:*:*) - UNAME_MACHINE=`(uname -p) 2>/dev/null` + UNAME_MACHINE=`(uname -p) 2>/dev/null` case "${UNAME_MACHINE}" in A*) echo alpha-dec-vms ; exit ;; I*) echo ia64-dec-vms ; exit ;; @@ -1303,11 +1356,11 @@ EOF i*86:AROS:*:*) echo ${UNAME_MACHINE}-pc-aros exit ;; + x86_64:VMkernel:*:*) + echo ${UNAME_MACHINE}-unknown-esx + exit ;; esac -#echo '(No uname command or uname output not recognized.)' 1>&2 -#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 - eval $set_cc_for_build cat >$dummy.c <<EOF #ifdef _SEQUENT_ @@ -1325,11 +1378,11 @@ main () #include <sys/param.h> printf ("m68k-sony-newsos%s\n", #ifdef NEWSOS4 - "4" + "4" #else - "" + "" #endif - ); exit (0); + ); exit (0); #endif #endif diff --git a/build-aux/config.sub b/build-aux/config.sub index 320e303..8b612ab 100755 --- a/build-aux/config.sub +++ b/build-aux/config.sub @@ -1,38 +1,31 @@ #! /bin/sh # Configuration validation subroutine script. -# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 -# Free Software Foundation, Inc. +# Copyright 1992-2013 Free Software Foundation, Inc. -timestamp='2010-09-11' +timestamp='2013-04-24' -# This file is (in principle) common to ALL GNU software. -# The presence of a machine in this file suggests that SOME GNU software -# can handle that machine. It does not imply ALL GNU software can. -# -# This file is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or +# This file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or # (at your option) any later version. # -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. # # You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA -# 02110-1301, USA. +# along with this program; if not, see <http://www.gnu.org/licenses/>. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. +# the same distribution terms that you use for the rest of that +# program. This Exception is an additional permission under section 7 +# of the GNU General Public License, version 3 ("GPLv3"). -# Please send patches to <config-patches@gnu.org>. Submit a context -# diff and a properly formatted GNU ChangeLog entry. +# Please send patches with a ChangeLog entry to config-patches@gnu.org. # # Configuration subroutine to validate and canonicalize a configuration type. # Supply the specified configuration type as an argument. @@ -75,9 +68,7 @@ Report bugs and patches to <config-patches@gnu.org>." version="\ GNU config.sub ($timestamp) -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, -2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free -Software Foundation, Inc. +Copyright 1992-2013 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." @@ -125,13 +116,17 @@ esac maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` case $maybe_os in nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \ - linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \ + linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \ knetbsd*-gnu* | netbsd*-gnu* | \ kopensolaris*-gnu* | \ storm-chaos* | os2-emx* | rtmk-nova*) os=-$maybe_os basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` ;; + android-linux) + os=-linux-android + basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown + ;; *) basic_machine=`echo $1 | sed 's/-[^-]*$//'` if [ $basic_machine != $1 ] @@ -154,12 +149,12 @@ case $os in -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ - -apple | -axis | -knuth | -cray | -microblaze) + -apple | -axis | -knuth | -cray | -microblaze*) os= basic_machine=$1 ;; - -bluegene*) - os=-cnk + -bluegene*) + os=-cnk ;; -sim | -cisco | -oki | -wec | -winbond) os= @@ -175,10 +170,10 @@ case $os in os=-chorusos basic_machine=$1 ;; - -chorusrdb) - os=-chorusrdb + -chorusrdb) + os=-chorusrdb basic_machine=$1 - ;; + ;; -hiux*) os=-hiuxwe2 ;; @@ -223,6 +218,12 @@ case $os in -isc*) basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; + -lynx*178) + os=-lynxos178 + ;; + -lynx*5) + os=-lynxos5 + ;; -lynx*) os=-lynxos ;; @@ -247,20 +248,27 @@ case $basic_machine in # Some are omitted here because they have special meanings below. 1750a | 580 \ | a29k \ + | aarch64 | aarch64_be \ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ | am33_2.0 \ - | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \ + | arc | arceb \ + | arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \ + | avr | avr32 \ + | be32 | be64 \ | bfin \ | c4x | clipper \ | d10v | d30v | dlx | dsp16xx \ + | epiphany \ | fido | fr30 | frv \ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ + | hexagon \ | i370 | i860 | i960 | ia64 \ | ip2k | iq2000 \ + | le32 | le64 \ | lm32 \ | m32c | m32r | m32rle | m68000 | m68k | m88k \ - | maxq | mb | microblaze | mcore | mep | metag \ + | maxq | mb | microblaze | microblazeel | mcore | mep | metag \ | mips | mipsbe | mipseb | mipsel | mipsle \ | mips16 \ | mips64 | mips64el \ @@ -278,30 +286,32 @@ case $basic_machine in | mipsisa64r2 | mipsisa64r2el \ | mipsisa64sb1 | mipsisa64sb1el \ | mipsisa64sr71k | mipsisa64sr71kel \ + | mipsr5900 | mipsr5900el \ | mipstx39 | mipstx39el \ | mn10200 | mn10300 \ | moxie \ | mt \ | msp430 \ | nds32 | nds32le | nds32be \ - | nios | nios2 \ + | nios | nios2 | nios2eb | nios2el \ | ns16k | ns32k \ - | or32 \ + | open8 \ + | or1k | or32 \ | pdp10 | pdp11 | pj | pjl \ - | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ + | powerpc | powerpc64 | powerpc64le | powerpcle \ | pyramid \ - | rx \ + | rl78 | rx \ | score \ | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ | sh64 | sh64le \ | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ - | spu | strongarm \ - | tahoe | thumb | tic4x | tic54x | tic55x | tic6x | tic80 | tron \ + | spu \ + | tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \ | ubicom32 \ - | v850 | v850e \ + | v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \ | we32k \ - | x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \ + | x86 | xc16x | xstormy16 | xtensa \ | z8k | z80) basic_machine=$basic_machine-unknown ;; @@ -314,8 +324,7 @@ case $basic_machine in c6x) basic_machine=tic6x-unknown ;; - m6811 | m68hc11 | m6812 | m68hc12 | picochip) - # Motorola 68HC11/12. + m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | picochip) basic_machine=$basic_machine-unknown os=-none ;; @@ -325,6 +334,21 @@ case $basic_machine in basic_machine=mt-unknown ;; + strongarm | thumb | xscale) + basic_machine=arm-unknown + ;; + xgate) + basic_machine=$basic_machine-unknown + os=-none + ;; + xscaleeb) + basic_machine=armeb-unknown + ;; + + xscaleel) + basic_machine=armel-unknown + ;; + # We use `pc' rather than `unknown' # because (1) that's what they normally are, and # (2) the word "unknown" tends to confuse beginning users. @@ -339,11 +363,13 @@ case $basic_machine in # Recognize the basic CPU types with company name. 580-* \ | a29k-* \ + | aarch64-* | aarch64_be-* \ | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ - | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ + | alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ | avr-* | avr32-* \ + | be32-* | be64-* \ | bfin-* | bs2000-* \ | c[123]* | c30-* | [cjt]90-* | c4x-* \ | clipper-* | craynv-* | cydra-* \ @@ -352,12 +378,15 @@ case $basic_machine in | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ | h8300-* | h8500-* \ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ + | hexagon-* \ | i*86-* | i860-* | i960-* | ia64-* \ | ip2k-* | iq2000-* \ + | le32-* | le64-* \ | lm32-* \ | m32c-* | m32r-* | m32rle-* \ | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ - | m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \ + | m88110-* | m88k-* | maxq-* | mcore-* | metag-* \ + | microblaze-* | microblazeel-* \ | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ | mips16-* \ | mips64-* | mips64el-* \ @@ -375,31 +404,34 @@ case $basic_machine in | mipsisa64r2-* | mipsisa64r2el-* \ | mipsisa64sb1-* | mipsisa64sb1el-* \ | mipsisa64sr71k-* | mipsisa64sr71kel-* \ + | mipsr5900-* | mipsr5900el-* \ | mipstx39-* | mipstx39el-* \ | mmix-* \ | mt-* \ | msp430-* \ | nds32-* | nds32le-* | nds32be-* \ - | nios-* | nios2-* \ + | nios-* | nios2-* | nios2eb-* | nios2el-* \ | none-* | np1-* | ns16k-* | ns32k-* \ + | open8-* \ | orion-* \ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ - | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ + | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \ | pyramid-* \ - | romp-* | rs6000-* | rx-* \ + | rl78-* | romp-* | rs6000-* | rx-* \ | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ | sparclite-* \ - | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \ - | tahoe-* | thumb-* \ + | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \ + | tahoe-* \ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ - | tile-* | tilegx-* \ + | tile*-* \ | tron-* \ | ubicom32-* \ - | v850-* | v850e-* | vax-* \ + | v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \ + | vax-* \ | we32k-* \ - | x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \ + | x86-* | x86_64-* | xc16x-* | xps100-* \ | xstormy16-* | xtensa*-* \ | ymp-* \ | z8k-* | z80-*) @@ -424,7 +456,7 @@ case $basic_machine in basic_machine=a29k-amd os=-udi ;; - abacus) + abacus) basic_machine=abacus-unknown ;; adobe68k) @@ -507,7 +539,7 @@ case $basic_machine in basic_machine=c90-cray os=-unicos ;; - cegcc) + cegcc) basic_machine=arm-unknown os=-cegcc ;; @@ -539,7 +571,7 @@ case $basic_machine in basic_machine=craynv-cray os=-unicosmp ;; - cr16) + cr16 | cr16-*) basic_machine=cr16-unknown os=-elf ;; @@ -697,7 +729,6 @@ case $basic_machine in i370-ibm* | ibm*) basic_machine=i370-ibm ;; -# I'm not sure what "Sysv32" means. Should this be sysv3.2? i*86v32) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv32 @@ -755,9 +786,13 @@ case $basic_machine in basic_machine=ns32k-utek os=-sysv ;; - microblaze) + microblaze*) basic_machine=microblaze-xilinx ;; + mingw64) + basic_machine=x86_64-pc + os=-mingw64 + ;; mingw32) basic_machine=i386-pc os=-mingw32 @@ -794,10 +829,18 @@ case $basic_machine in ms1-*) basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` ;; + msys) + basic_machine=i386-pc + os=-msys + ;; mvs) basic_machine=i370-ibm os=-mvs ;; + nacl) + basic_machine=le32-unknown + os=-nacl + ;; ncr3000) basic_machine=i486-ncr os=-sysv4 @@ -862,10 +905,10 @@ case $basic_machine in np1) basic_machine=np1-gould ;; - neo-tandem) + neo-tandem) basic_machine=neo-tandem ;; - nse-tandem) + nse-tandem) basic_machine=nse-tandem ;; nsr-tandem) @@ -950,9 +993,10 @@ case $basic_machine in ;; power) basic_machine=power-ibm ;; - ppc) basic_machine=powerpc-unknown + ppc | ppcbe) basic_machine=powerpc-unknown ;; - ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` + ppc-* | ppcbe-*) + basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppcle | powerpclittle | ppc-le | powerpc-little) basic_machine=powerpcle-unknown @@ -977,7 +1021,11 @@ case $basic_machine in basic_machine=i586-unknown os=-pw32 ;; - rdos) + rdos | rdos64) + basic_machine=x86_64-pc + os=-rdos + ;; + rdos32) basic_machine=i386-pc os=-rdos ;; @@ -1046,6 +1094,9 @@ case $basic_machine in basic_machine=i860-stratus os=-sysv4 ;; + strongarm-* | thumb-*) + basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; sun2) basic_machine=m68000-sun ;; @@ -1102,13 +1153,8 @@ case $basic_machine in basic_machine=t90-cray os=-unicos ;; - # This must be matched before tile*. - tilegx*) - basic_machine=tilegx-unknown - os=-linux-gnu - ;; tile*) - basic_machine=tile-unknown + basic_machine=$basic_machine-unknown os=-linux-gnu ;; tx39) @@ -1178,6 +1224,9 @@ case $basic_machine in xps | xps100) basic_machine=xps100-honeywell ;; + xscale-* | xscalee[bl]-*) + basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'` + ;; ymp) basic_machine=ymp-cray os=-unicos @@ -1275,11 +1324,11 @@ esac if [ x"$os" != x"" ] then case $os in - # First match some system type aliases - # that might get confused with valid system types. + # First match some system type aliases + # that might get confused with valid system types. # -solaris* is a basic system type, with this one exception. - -auroraux) - os=-auroraux + -auroraux) + os=-auroraux ;; -solaris1 | -solaris1.*) os=`echo $os | sed -e 's|solaris1|sunos4|'` @@ -1303,21 +1352,21 @@ case $os in -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \ - | -sym* | -kopensolaris* \ + | -sym* | -kopensolaris* | -plan9* \ | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ | -aos* | -aros* \ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ - | -openbsd* | -solidbsd* \ + | -bitrig* | -openbsd* | -solidbsd* \ | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ | -chorusos* | -chorusrdb* | -cegcc* \ - | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ - | -mingw32* | -linux-gnu* | -linux-android* \ - | -linux-newlib* | -linux-uclibc* \ + | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ + | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \ + | -linux-newlib* | -linux-musl* | -linux-uclibc* \ | -uxpv* | -beos* | -mpeix* | -udk* \ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ @@ -1364,7 +1413,7 @@ case $os in -opened*) os=-openedition ;; - -os400*) + -os400*) os=-os400 ;; -wince*) @@ -1413,7 +1462,7 @@ case $os in -sinix*) os=-sysv4 ;; - -tpf*) + -tpf*) os=-tpf ;; -triton*) @@ -1449,17 +1498,14 @@ case $os in -aros*) os=-aros ;; - -kaos*) - os=-kaos - ;; -zvmoe) os=-zvmoe ;; -dicos*) os=-dicos ;; - -nacl*) - ;; + -nacl*) + ;; -none) ;; *) @@ -1482,10 +1528,10 @@ else # system, and we'll never get to this point. case $basic_machine in - score-*) + score-*) os=-elf ;; - spu-*) + spu-*) os=-elf ;; *-acorn) @@ -1497,8 +1543,11 @@ case $basic_machine in arm*-semi) os=-aout ;; - c4x-* | tic4x-*) - os=-coff + c4x-* | tic4x-*) + os=-coff + ;; + hexagon-*) + os=-elf ;; tic54x-*) os=-coff @@ -1527,14 +1576,11 @@ case $basic_machine in ;; m68000-sun) os=-sunos3 - # This also exists in the configure program, but was not the - # default. - # os=-sunos4 ;; m68*-cisco) os=-aout ;; - mep-*) + mep-*) os=-elf ;; mips*-cisco) @@ -1543,6 +1589,9 @@ case $basic_machine in mips*-*) os=-elf ;; + or1k-*) + os=-elf + ;; or32-*) os=-coff ;; @@ -1561,7 +1610,7 @@ case $basic_machine in *-ibm) os=-aix ;; - *-knuth) + *-knuth) os=-mmixware ;; *-wec) diff --git a/build-aux/depcomp b/build-aux/depcomp index df8eea7..4ebd5b3 100755 --- a/build-aux/depcomp +++ b/build-aux/depcomp @@ -1,10 +1,9 @@ #! /bin/sh # depcomp - compile a program generating dependencies as side-effects -scriptversion=2009-04-28.21; # UTC +scriptversion=2013-05-30.07; # UTC -# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009 Free -# Software Foundation, Inc. +# Copyright (C) 1999-2013 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -28,9 +27,9 @@ scriptversion=2009-04-28.21; # UTC case $1 in '') - echo "$0: No command. Try \`$0 --help' for more information." 1>&2 - exit 1; - ;; + echo "$0: No command. Try '$0 --help' for more information." 1>&2 + exit 1; + ;; -h | --h*) cat <<\EOF Usage: depcomp [--help] [--version] PROGRAM [ARGS] @@ -40,11 +39,11 @@ as side-effects. Environment variables: depmode Dependency tracking mode. - source Source file read by `PROGRAMS ARGS'. - object Object file output by `PROGRAMS ARGS'. + source Source file read by 'PROGRAMS ARGS'. + object Object file output by 'PROGRAMS ARGS'. DEPDIR directory where to store dependencies. depfile Dependency file to output. - tmpdepfile Temporary file to use when outputing dependencies. + tmpdepfile Temporary file to use when outputting dependencies. libtool Whether libtool is used (yes/no). Report bugs to <bug-automake@gnu.org>. @@ -57,6 +56,66 @@ EOF ;; esac +# Get the directory component of the given path, and save it in the +# global variables '$dir'. Note that this directory component will +# be either empty or ending with a '/' character. This is deliberate. +set_dir_from () +{ + case $1 in + */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;; + *) dir=;; + esac +} + +# Get the suffix-stripped basename of the given path, and save it the +# global variable '$base'. +set_base_from () +{ + base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'` +} + +# If no dependency file was actually created by the compiler invocation, +# we still have to create a dummy depfile, to avoid errors with the +# Makefile "include basename.Plo" scheme. +make_dummy_depfile () +{ + echo "#dummy" > "$depfile" +} + +# Factor out some common post-processing of the generated depfile. +# Requires the auxiliary global variable '$tmpdepfile' to be set. +aix_post_process_depfile () +{ + # If the compiler actually managed to produce a dependency file, + # post-process it. + if test -f "$tmpdepfile"; then + # Each line is of the form 'foo.o: dependency.h'. + # Do two passes, one to just change these to + # $object: dependency.h + # and one to simply output + # dependency.h: + # which is needed to avoid the deleted-header problem. + { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile" + sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile" + } > "$depfile" + rm -f "$tmpdepfile" + else + make_dummy_depfile + fi +} + +# A tabulation character. +tab=' ' +# A newline character. +nl=' +' +# Character ranges might be problematic outside the C locale. +# These definitions help. +upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ +lower=abcdefghijklmnopqrstuvwxyz +digits=0123456789 +alpha=${upper}${lower} + if test -z "$depmode" || test -z "$source" || test -z "$object"; then echo "depcomp: Variables source, object and depmode must be set" 1>&2 exit 1 @@ -69,6 +128,9 @@ tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} rm -f "$tmpdepfile" +# Avoid interferences from the environment. +gccflag= dashmflag= + # Some modes work just like other modes, but use different flags. We # parameterize here, but still list the modes in the big case below, # to make depend.m4 easier to write. Note that we *cannot* use a case @@ -80,18 +142,32 @@ if test "$depmode" = hp; then fi if test "$depmode" = dashXmstdout; then - # This is just like dashmstdout with a different argument. - dashmflag=-xM - depmode=dashmstdout + # This is just like dashmstdout with a different argument. + dashmflag=-xM + depmode=dashmstdout fi cygpath_u="cygpath -u -f -" if test "$depmode" = msvcmsys; then - # This is just like msvisualcpp but w/o cygpath translation. - # Just convert the backslash-escaped backslashes to single forward - # slashes to satisfy depend.m4 - cygpath_u="sed s,\\\\\\\\,/,g" - depmode=msvisualcpp + # This is just like msvisualcpp but w/o cygpath translation. + # Just convert the backslash-escaped backslashes to single forward + # slashes to satisfy depend.m4 + cygpath_u='sed s,\\\\,/,g' + depmode=msvisualcpp +fi + +if test "$depmode" = msvc7msys; then + # This is just like msvc7 but w/o cygpath translation. + # Just convert the backslash-escaped backslashes to single forward + # slashes to satisfy depend.m4 + cygpath_u='sed s,\\\\,/,g' + depmode=msvc7 +fi + +if test "$depmode" = xlc; then + # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information. + gccflag=-qmakedep=gcc,-MF + depmode=gcc fi case "$depmode" in @@ -114,8 +190,7 @@ gcc3) done "$@" stat=$? - if test $stat -eq 0; then : - else + if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi @@ -123,13 +198,17 @@ gcc3) ;; gcc) +## Note that this doesn't just cater to obsosete pre-3.x GCC compilers. +## but also to in-use compilers like IMB xlc/xlC and the HP C compiler. +## (see the conditional assignment to $gccflag above). ## There are various ways to get dependency output from gcc. Here's ## why we pick this rather obscure method: ## - Don't want to use -MD because we'd like the dependencies to end ## up in a subdir. Having to rename by hand is ugly. ## (We might end up doing this anyway to support other compilers.) ## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like -## -MM, not -M (despite what the docs say). +## -MM, not -M (despite what the docs say). Also, it might not be +## supported by the other compilers which use the 'gcc' depmode. ## - Using -M directly means running the compiler twice (even worse ## than renaming). if test -z "$gccflag"; then @@ -137,31 +216,31 @@ gcc) fi "$@" -Wp,"$gccflag$tmpdepfile" stat=$? - if test $stat -eq 0; then : - else + if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" echo "$object : \\" > "$depfile" - alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz -## The second -e expression handles DOS-style file names with drive letters. + # The second -e expression handles DOS-style file names with drive + # letters. sed -e 's/^[^:]*: / /' \ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" -## This next piece of magic avoids the `deleted header file' problem. +## This next piece of magic avoids the "deleted header file" problem. ## The problem is that when a header file which appears in a .P file ## is deleted, the dependency causes make to die (because there is ## typically no way to rebuild the header). We avoid this by adding ## dummy dependencies for each header file. Too bad gcc doesn't do ## this for us directly. - tr ' ' ' -' < "$tmpdepfile" | -## Some versions of gcc put a space before the `:'. On the theory +## Some versions of gcc put a space before the ':'. On the theory ## that the space means something, we add a space to the output as -## well. +## well. hp depmode also adds that space, but also prefixes the VPATH +## to the object. Take care to not repeat it in the output. ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. - sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + tr ' ' "$nl" < "$tmpdepfile" \ + | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \ + | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; @@ -179,8 +258,7 @@ sgi) "$@" -MDupdate "$tmpdepfile" fi stat=$? - if test $stat -eq 0; then : - else + if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi @@ -188,43 +266,41 @@ sgi) if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files echo "$object : \\" > "$depfile" - # Clip off the initial element (the dependent). Don't try to be # clever and replace this with sed code, as IRIX sed won't handle # lines with more than a fixed number of characters (4096 in # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; - # the IRIX cc adds comments like `#:fec' to the end of the + # the IRIX cc adds comments like '#:fec' to the end of the # dependency line. - tr ' ' ' -' < "$tmpdepfile" \ - | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ - tr ' -' ' ' >> "$depfile" + tr ' ' "$nl" < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \ + | tr "$nl" ' ' >> "$depfile" echo >> "$depfile" - # The second pass generates a dummy entry for each header file. - tr ' ' ' -' < "$tmpdepfile" \ - | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ - >> "$depfile" + tr ' ' "$nl" < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ + >> "$depfile" else - # The sourcefile does not contain any dependencies, so just - # store a dummy comment line, to avoid errors with the Makefile - # "include basename.Plo" scheme. - echo "#dummy" > "$depfile" + make_dummy_depfile fi rm -f "$tmpdepfile" ;; +xlc) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + aix) # The C for AIX Compiler uses -M and outputs the dependencies # in a .u file. In older versions, this file always lives in the - # current directory. Also, the AIX compiler puts `$object:' at the + # current directory. Also, the AIX compiler puts '$object:' at the # start of each line; $object doesn't have directory information. # Version 6 uses the directory in both cases. - dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` - test "x$dir" = "x$object" && dir= - base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` + set_dir_from "$object" + set_base_from "$object" if test "$libtool" = yes; then tmpdepfile1=$dir$base.u tmpdepfile2=$base.u @@ -237,9 +313,7 @@ aix) "$@" -M fi stat=$? - - if test $stat -eq 0; then : - else + if test $stat -ne 0; then rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" exit $stat fi @@ -248,44 +322,100 @@ aix) do test -f "$tmpdepfile" && break done - if test -f "$tmpdepfile"; then - # Each line is of the form `foo.o: dependent.h'. - # Do two passes, one to just change these to - # `$object: dependent.h' and one to simply `dependent.h:'. - sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" - # That's a tab and a space in the []. - sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" - else - # The sourcefile does not contain any dependencies, so just - # store a dummy comment line, to avoid errors with the Makefile - # "include basename.Plo" scheme. - echo "#dummy" > "$depfile" + aix_post_process_depfile + ;; + +tcc) + # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26 + # FIXME: That version still under development at the moment of writing. + # Make that this statement remains true also for stable, released + # versions. + # It will wrap lines (doesn't matter whether long or short) with a + # trailing '\', as in: + # + # foo.o : \ + # foo.c \ + # foo.h \ + # + # It will put a trailing '\' even on the last line, and will use leading + # spaces rather than leading tabs (at least since its commit 0394caf7 + # "Emit spaces for -MD"). + "$@" -MD -MF "$tmpdepfile" + stat=$? + if test $stat -ne 0; then + rm -f "$tmpdepfile" + exit $stat fi + rm -f "$depfile" + # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'. + # We have to change lines of the first kind to '$object: \'. + sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile" + # And for each line of the second kind, we have to emit a 'dep.h:' + # dummy dependency, to avoid the deleted-header problem. + sed -n -e 's|^ *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile" rm -f "$tmpdepfile" ;; -icc) - # Intel's C compiler understands `-MD -MF file'. However on - # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c - # ICC 7.0 will fill foo.d with something like - # foo.o: sub/foo.c - # foo.o: sub/foo.h - # which is wrong. We want: - # sub/foo.o: sub/foo.c - # sub/foo.o: sub/foo.h - # sub/foo.c: - # sub/foo.h: - # ICC 7.1 will output +## The order of this option in the case statement is important, since the +## shell code in configure will try each of these formats in the order +## listed in this file. A plain '-MD' option would be understood by many +## compilers, so we must ensure this comes after the gcc and icc options. +pgcc) + # Portland's C compiler understands '-MD'. + # Will always output deps to 'file.d' where file is the root name of the + # source file under compilation, even if file resides in a subdirectory. + # The object file name does not affect the name of the '.d' file. + # pgcc 10.2 will output # foo.o: sub/foo.c sub/foo.h - # and will wrap long lines using \ : + # and will wrap long lines using '\' : # foo.o: sub/foo.c ... \ # sub/foo.h ... \ # ... + set_dir_from "$object" + # Use the source, not the object, to determine the base name, since + # that's sadly what pgcc will do too. + set_base_from "$source" + tmpdepfile=$base.d + + # For projects that build the same source file twice into different object + # files, the pgcc approach of using the *source* file root name can cause + # problems in parallel builds. Use a locking strategy to avoid stomping on + # the same $tmpdepfile. + lockdir=$base.d-lock + trap " + echo '$0: caught signal, cleaning up...' >&2 + rmdir '$lockdir' + exit 1 + " 1 2 13 15 + numtries=100 + i=$numtries + while test $i -gt 0; do + # mkdir is a portable test-and-set. + if mkdir "$lockdir" 2>/dev/null; then + # This process acquired the lock. + "$@" -MD + stat=$? + # Release the lock. + rmdir "$lockdir" + break + else + # If the lock is being held by a different process, wait + # until the winning process is done or we timeout. + while test -d "$lockdir" && test $i -gt 0; do + sleep 1 + i=`expr $i - 1` + done + fi + i=`expr $i - 1` + done + trap - 1 2 13 15 + if test $i -le 0; then + echo "$0: failed to acquire lock after $numtries attempts" >&2 + echo "$0: check lockdir '$lockdir'" >&2 + exit 1 + fi - "$@" -MD -MF "$tmpdepfile" - stat=$? - if test $stat -eq 0; then : - else + if test $stat -ne 0; then rm -f "$tmpdepfile" exit $stat fi @@ -297,8 +427,8 @@ icc) sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" # Some versions of the HPUX 10.20 sed can't process this invocation # correctly. Breaking it into two sed invocations is a workaround. - sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" | - sed -e 's/$/ :/' >> "$depfile" + sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \ + | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; @@ -309,9 +439,8 @@ hp2) # 'foo.d', which lands next to the object file, wherever that # happens to be. # Much of this is similar to the tru64 case; see comments there. - dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` - test "x$dir" = "x$object" && dir= - base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` + set_dir_from "$object" + set_base_from "$object" if test "$libtool" = yes; then tmpdepfile1=$dir$base.d tmpdepfile2=$dir.libs/$base.d @@ -322,8 +451,7 @@ hp2) "$@" +Maked fi stat=$? - if test $stat -eq 0; then : - else + if test $stat -ne 0; then rm -f "$tmpdepfile1" "$tmpdepfile2" exit $stat fi @@ -333,77 +461,107 @@ hp2) test -f "$tmpdepfile" && break done if test -f "$tmpdepfile"; then - sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile" - # Add `dependent.h:' lines. + sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile" + # Add 'dependent.h:' lines. sed -ne '2,${ - s/^ *// - s/ \\*$// - s/$/:/ - p - }' "$tmpdepfile" >> "$depfile" + s/^ *// + s/ \\*$// + s/$/:/ + p + }' "$tmpdepfile" >> "$depfile" else - echo "#dummy" > "$depfile" + make_dummy_depfile fi rm -f "$tmpdepfile" "$tmpdepfile2" ;; tru64) - # The Tru64 compiler uses -MD to generate dependencies as a side - # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. - # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put - # dependencies in `foo.d' instead, so we check for that too. - # Subdirectories are respected. - dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` - test "x$dir" = "x$object" && dir= - base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` - - if test "$libtool" = yes; then - # With Tru64 cc, shared objects can also be used to make a - # static library. This mechanism is used in libtool 1.4 series to - # handle both shared and static libraries in a single compilation. - # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d. - # - # With libtool 1.5 this exception was removed, and libtool now - # generates 2 separate objects for the 2 libraries. These two - # compilations output dependencies in $dir.libs/$base.o.d and - # in $dir$base.o.d. We have to check for both files, because - # one of the two compilations can be disabled. We should prefer - # $dir$base.o.d over $dir.libs/$base.o.d because the latter is - # automatically cleaned when .libs/ is deleted, while ignoring - # the former would cause a distcleancheck panic. - tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4 - tmpdepfile2=$dir$base.o.d # libtool 1.5 - tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5 - tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504 - "$@" -Wc,-MD - else - tmpdepfile1=$dir$base.o.d - tmpdepfile2=$dir$base.d - tmpdepfile3=$dir$base.d - tmpdepfile4=$dir$base.d - "$@" -MD - fi - - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" - exit $stat - fi - - for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" - do - test -f "$tmpdepfile" && break - done - if test -f "$tmpdepfile"; then - sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" - # That's a tab and a space in the []. - sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" - else - echo "#dummy" > "$depfile" - fi - rm -f "$tmpdepfile" - ;; + # The Tru64 compiler uses -MD to generate dependencies as a side + # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'. + # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put + # dependencies in 'foo.d' instead, so we check for that too. + # Subdirectories are respected. + set_dir_from "$object" + set_base_from "$object" + + if test "$libtool" = yes; then + # Libtool generates 2 separate objects for the 2 libraries. These + # two compilations output dependencies in $dir.libs/$base.o.d and + # in $dir$base.o.d. We have to check for both files, because + # one of the two compilations can be disabled. We should prefer + # $dir$base.o.d over $dir.libs/$base.o.d because the latter is + # automatically cleaned when .libs/ is deleted, while ignoring + # the former would cause a distcleancheck panic. + tmpdepfile1=$dir$base.o.d # libtool 1.5 + tmpdepfile2=$dir.libs/$base.o.d # Likewise. + tmpdepfile3=$dir.libs/$base.d # Compaq CCC V6.2-504 + "$@" -Wc,-MD + else + tmpdepfile1=$dir$base.d + tmpdepfile2=$dir$base.d + tmpdepfile3=$dir$base.d + "$@" -MD + fi + + stat=$? + if test $stat -ne 0; then + rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" + do + test -f "$tmpdepfile" && break + done + # Same post-processing that is required for AIX mode. + aix_post_process_depfile + ;; + +msvc7) + if test "$libtool" = yes; then + showIncludes=-Wc,-showIncludes + else + showIncludes=-showIncludes + fi + "$@" $showIncludes > "$tmpdepfile" + stat=$? + grep -v '^Note: including file: ' "$tmpdepfile" + if test $stat -ne 0; then + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + echo "$object : \\" > "$depfile" + # The first sed program below extracts the file names and escapes + # backslashes for cygpath. The second sed program outputs the file + # name when reading, but also accumulates all include files in the + # hold buffer in order to output them again at the end. This only + # works with sed implementations that can handle large buffers. + sed < "$tmpdepfile" -n ' +/^Note: including file: *\(.*\)/ { + s//\1/ + s/\\/\\\\/g + p +}' | $cygpath_u | sort -u | sed -n ' +s/ /\\ /g +s/\(.*\)/'"$tab"'\1 \\/p +s/.\(.*\) \\/\1:/ +H +$ { + s/.*/'"$tab"'/ + G + p +}' >> "$depfile" + echo >> "$depfile" # make sure the fragment doesn't end with a backslash + rm -f "$tmpdepfile" + ;; + +msvc7msys) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; #nosideeffect) # This comment above is used by automake to tell side-effect @@ -422,7 +580,7 @@ dashmstdout) shift fi - # Remove `-o $object'. + # Remove '-o $object'. IFS=" " for arg do @@ -442,18 +600,18 @@ dashmstdout) done test -z "$dashmflag" && dashmflag=-M - # Require at least two characters before searching for `:' + # Require at least two characters before searching for ':' # in the target name. This is to cope with DOS-style filenames: - # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise. + # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise. "$@" $dashmflag | - sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" + sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile" rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" - tr ' ' ' -' < "$tmpdepfile" | \ -## Some versions of the HPUX 10.20 sed can't process this invocation -## correctly. Breaking it into two sed invocations is a workaround. - sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + # Some versions of the HPUX 10.20 sed can't process this sed invocation + # correctly. Breaking it into two sed invocations is a workaround. + tr ' ' "$nl" < "$tmpdepfile" \ + | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \ + | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; @@ -503,12 +661,15 @@ makedepend) touch "$tmpdepfile" ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" rm -f "$depfile" - cat < "$tmpdepfile" > "$depfile" - sed '1,2d' "$tmpdepfile" | tr ' ' ' -' | \ -## Some versions of the HPUX 10.20 sed can't process this invocation -## correctly. Breaking it into two sed invocations is a workaround. - sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + # makedepend may prepend the VPATH from the source file name to the object. + # No need to regex-escape $object, excess matching of '.' is harmless. + sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile" + # Some versions of the HPUX 10.20 sed can't process the last invocation + # correctly. Breaking it into two sed invocations is a workaround. + sed '1,2d' "$tmpdepfile" \ + | tr ' ' "$nl" \ + | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \ + | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" "$tmpdepfile".bak ;; @@ -525,7 +686,7 @@ cpp) shift fi - # Remove `-o $object'. + # Remove '-o $object'. IFS=" " for arg do @@ -544,10 +705,10 @@ cpp) esac done - "$@" -E | - sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ - -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | - sed '$ s: \\$::' > "$tmpdepfile" + "$@" -E \ + | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ + -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ + | sed '$ s: \\$::' > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" cat < "$tmpdepfile" >> "$depfile" @@ -579,23 +740,23 @@ msvisualcpp) shift ;; "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") - set fnord "$@" - shift - shift - ;; + set fnord "$@" + shift + shift + ;; *) - set fnord "$@" "$arg" - shift - shift - ;; + set fnord "$@" "$arg" + shift + shift + ;; esac done "$@" -E 2>/dev/null | sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" - sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" - echo " " >> "$depfile" + sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile" + echo "$tab" >> "$depfile" sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile" rm -f "$tmpdepfile" ;; diff --git a/build-aux/install-sh b/build-aux/install-sh index 3f83ce9..377bb86 100755 --- a/build-aux/install-sh +++ b/build-aux/install-sh @@ -1,7 +1,7 @@ #!/bin/sh # install - install a program, script, or datafile -scriptversion=2010-02-06.18; # UTC +scriptversion=2011-11-20.07; # UTC # This originates from X11R5 (mit/util/scripts/install.sh), which was # later released in X11R6 (xc/config/util/install.sh) with the @@ -35,7 +35,7 @@ scriptversion=2010-02-06.18; # UTC # FSF changes to this file are in the public domain. # # Calling this script install-sh is preferred over install.sh, to prevent -# `make' implicit rules from creating a file called install from it +# 'make' implicit rules from creating a file called install from it # when there is no Makefile. # # This script is compatible with the BSD install script, but was written @@ -156,6 +156,10 @@ while test $# -ne 0; do -s) stripcmd=$stripprog;; -t) dst_arg=$2 + # Protect names problematic for 'test' and other utilities. + case $dst_arg in + -* | [=\(\)!]) dst_arg=./$dst_arg;; + esac shift;; -T) no_target_directory=true;; @@ -186,6 +190,10 @@ if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then fi shift # arg dst_arg=$arg + # Protect names problematic for 'test' and other utilities. + case $dst_arg in + -* | [=\(\)!]) dst_arg=./$dst_arg;; + esac done fi @@ -194,7 +202,7 @@ if test $# -eq 0; then echo "$0: no input file specified." >&2 exit 1 fi - # It's OK to call `install-sh -d' without argument. + # It's OK to call 'install-sh -d' without argument. # This can happen when creating conditional directories. exit 0 fi @@ -232,9 +240,9 @@ fi for src do - # Protect names starting with `-'. + # Protect names problematic for 'test' and other utilities. case $src in - -*) src=./$src;; + -* | [=\(\)!]) src=./$src;; esac if test -n "$dir_arg"; then @@ -256,12 +264,7 @@ do echo "$0: no destination specified." >&2 exit 1 fi - dst=$dst_arg - # Protect names starting with `-'. - case $dst in - -*) dst=./$dst;; - esac # If destination is a directory, append the input filename; won't work # if double slashes aren't ignored. @@ -351,7 +354,7 @@ do if test -z "$dir_arg" || { # Check for POSIX incompatibilities with -m. # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or - # other-writeable bit of parent directory when it shouldn't. + # other-writable bit of parent directory when it shouldn't. # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. ls_ld_tmpdir=`ls -ld "$tmpdir"` case $ls_ld_tmpdir in @@ -389,7 +392,7 @@ do case $dstdir in /*) prefix='/';; - -*) prefix='./';; + [-=\(\)!]*) prefix='./';; *) prefix='';; esac @@ -407,7 +410,7 @@ do for d do - test -z "$d" && continue + test X"$d" = X && continue prefix=$prefix$d if test -d "$prefix"; then diff --git a/build-aux/mkinstalldirs b/build-aux/mkinstalldirs index 4191a45..55d537f 100755 --- a/build-aux/mkinstalldirs +++ b/build-aux/mkinstalldirs @@ -81,9 +81,9 @@ case $dirmode in echo "mkdir -p -- $*" exec mkdir -p -- "$@" else - # On NextStep and OpenStep, the `mkdir' command does not + # On NextStep and OpenStep, the 'mkdir' command does not # recognize any option. It will interpret all options as - # directories to create, and then abort because `.' already + # directories to create, and then abort because '.' already # exists. test -d ./-p && rmdir ./-p test -d ./--version && rmdir ./--version -- 1.8.3.1