[arch-commits] Commit in openoffice-base-beta/trunk (4 files)
andyrtr at archlinux.org
andyrtr at archlinux.org
Sat Aug 9 13:01:15 UTC 2008
Date: Saturday, August 9, 2008 @ 09:01:07
Author: andyrtr
Revision: 8214
remove unneeded patches
Deleted:
openoffice-base-beta/trunk/buildfix-connectivity-evoab2.diff
openoffice-base-beta/trunk/configure_options
openoffice-base-beta/trunk/parallel_build.diff
openoffice-base-beta/trunk/scp2-without-myspell-dicts.diff
-----------------------------------+
buildfix-connectivity-evoab2.diff | 11
configure_options | 702 ------------------------------------
parallel_build.diff | 18
scp2-without-myspell-dicts.diff | 43 --
4 files changed, 774 deletions(-)
Deleted: buildfix-connectivity-evoab2.diff
===================================================================
--- buildfix-connectivity-evoab2.diff 2008-08-09 12:38:50 UTC (rev 8213)
+++ buildfix-connectivity-evoab2.diff 2008-08-09 13:01:07 UTC (rev 8214)
@@ -1,11 +0,0 @@
---- connectivity/source/drivers/evoab2/NStatement.cxx
-+++ connectivity/source/drivers/evoab2/NStatement.cxx
-@@ -403,7 +403,7 @@
- OSQLParseNode *pNodeForTableName = pAllTableNames->getChild( 0 )->getChild( 0 );
- if( m_aSQLIterator.isTableNode( pNodeForTableName ) )
- {
-- aTableName = getTableRange(pAllTableNames->getChild( 0 ));
-+ aTableName = OSQLParseNode::getTableRange(pAllTableNames->getChild( 0 ));
- if( !aTableName.getLength() )
- OSQLParseNode::getTableComponents( pNodeForTableName, aCatalog, aSchema, aTableName);
- }
Deleted: configure_options
===================================================================
--- configure_options 2008-08-09 12:38:50 UTC (rev 8213)
+++ configure_options 2008-08-09 13:01:07 UTC (rev 8214)
@@ -1,702 +0,0 @@
-`configure' configures this package to adapt to many kinds of systems.
-
-Usage: ./configure [OPTION]... [VAR=VALUE]...
-
-To assign environment variables (e.g., CC, CFLAGS...), specify them as
-VAR=VALUE. See below for descriptions of some of the useful variables.
-
-Defaults for the options are specified in brackets.
-
-Configuration:
- -h, --help display this help and exit
- --help=short display options specific to this package
- --help=recursive display the short help of all the included packages
- -V, --version display version information and exit
- -q, --quiet, --silent do not print `checking...' messages
- --cache-file=FILE cache test results in FILE [disabled]
- -C, --config-cache alias for `--cache-file=config.cache'
- -n, --no-create do not create output files
- --srcdir=DIR find the sources in DIR [configure dir or `..']
-
-Installation directories:
- --prefix=PREFIX install architecture-independent files in PREFIX
- [/usr/local]
- --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
- [PREFIX]
-
-By default, `make install' will install all the files in
-`/usr/local/bin', `/usr/local/lib' etc. You can specify
-an installation prefix other than `/usr/local' using `--prefix',
-for instance `--prefix=$HOME'.
-
-For better control, use the options below.
-
-Fine tuning of the installation directories:
- --bindir=DIR user executables [EPREFIX/bin]
- --sbindir=DIR system admin executables [EPREFIX/sbin]
- --libexecdir=DIR program executables [EPREFIX/libexec]
- --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
- --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
- --localstatedir=DIR modifiable single-machine data [PREFIX/var]
- --libdir=DIR object code libraries [EPREFIX/lib]
- --includedir=DIR C header files [PREFIX/include]
- --oldincludedir=DIR C header files for non-gcc [/usr/include]
- --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
- --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
- --infodir=DIR info documentation [DATAROOTDIR/info]
- --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
- --mandir=DIR man documentation [DATAROOTDIR/man]
- --docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE]
- --htmldir=DIR html documentation [DOCDIR]
- --dvidir=DIR dvi documentation [DOCDIR]
- --pdfdir=DIR pdf documentation [DOCDIR]
- --psdir=DIR ps documentation [DOCDIR]
-
-X features:
- --x-includes=DIR X include files are in DIR
- --x-libraries=DIR X library files are in DIR
-
-System types:
- --build=BUILD configure for building on BUILD [guessed]
- --host=HOST cross-compile to build programs to run on HOST [BUILD]
- --target=TARGET configure for building compilers for TARGET [HOST]
-
-Optional Features:
- --disable-option-checking ignore unrecognized --enable/--with options
- --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
- --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
- --disable-ldap Disables the use of LDAP backend via Netscape/Mozilla
- or OpenLDAP LDAP SDK
-
- --enable-lockdown Enables the gconf integration work in OOo
-
- --disable-vba disables the vba compatibility feature
-
- --enable-pch EXPERIMENTAL: Enables precompiled header support for C++.
-
- --disable-mozilla OO.o usually includes a strangely hacked up mozilla
- binary for your platform, to build without this
- version, use this option.
-
- --disable-epm OO.o includes self-packaging code, that requires
- epm, however epm is useless for large scale
- package building.
-
- --disable-odk OO.o includes an ODK, office development kit
- which some packagers may with to build without
-
- --disable-qadevooo OO.o includes some qa testsuites which some
- packagers may wish to build without
-
- --disable-fontooo disable FontOOo
- (useful for distributions using fontconfig for OOo)
-
- --disable-mathmldtd disable mathmldtd
- (useful for distributions that want to avoid packaging
- it)
-
- --enable-evolution2 Allows the built-in evolution 2 addressbook
- connectivity build to be enabled.
-
- --disable-cups disable cups support in the psprint project
-
- --disable-fontconfig disable support for the fontconfig library
-
- --disable-directx Remove DirectX implementation for the new XCanvas
- interface. The DirectX support requires more stuff
- installed on Windows to compile.
- (DirectX SDK, GDI+ libs)
-
- --disable-activex Disable the use of ActiveX for windows build.
- This switch is mandatory when using VC++ 2005 Express.
-
- --enable-symbols Include debugging symbols in output.
- WARNING - a complete build needs 8 Gb of space and
- takes much longer. (enables -g compiler flag)
-
- --enable-symbols=SMALL sets the gcc -g1 setting
- which is smaller.
-
- Enabling symbols disables the stripping of the solver
- (--disable-strip-solver).
-
- --disable-strip-solver Disable the stripping of the solver.
- By default the solver is stripped unless a build with
- debugging symbols (--enable-symbols) is requested.
-
- This switch allows to override this setting.
-
- --enable-werror Turn warnings to errors. (Has no effect in modules
- where the treating of warnings as errors is disabled
- explicitely)
-
- --enable-debug Include debugging symbols from --enable-symbols
- plus extra debugging code. Extra large build!
- (enables -g compiler flag and dmake debug=true)
-
- --enable-dbgutil Include additional debugging utilities, such as
- assertions, object counting, etc. Larger build.
- Independent from --enable-debug
-
- --enable-crashdump[=yes|TRUE|STATIC|no]
- Enable (disable) the crashdump feature code.
- [default=no]
-
- --enable-cl-standard For Microsoft C/C++ compiler users, use non-optimizing
- standard compiler. ( This just disavles optimization
- options and therefore removes a lot of warnings when
- using the cheaper standard compiler. )
-
- --disable-gtk Determines whether to use Gtk+ vclplug on platforms
- where Gtk+ is available.
-
- --disable-systray Determines whether to build the systray quickstarter.
-
- --enable-cairo Determines whether to use Cairo canvas backend on
- platforms where Cairo is available.
-
- --enable-opengl Determines whether to use OpenGL (for 3D transitions)
- This is built as an UNO extension and not deployed
- in the install per default.
-
- --enable-dbus Determines whether to enable presentation mode
- screensaver control under GNOME via DBUS
-
- --disable-gnome-vfs Determines whether to use the Gnome Virtual Filing
- System on platforms where that VFS is available
-
- --enable-gio Determines whether to use the GIO support
-
- --enable-static-gtk Modules that are linked against gtk libraries use
- the static libraries instead of the dynamic ones.
- (enables -Bstatic linker flag for gtk libraries)
-
- --enable-layout Enable the compilation and use of layout dialogs
-
- --disable-build-mozilla Use this option if you do not want to build the
- mozilla components from the mozilla source code but
- take precompiled zips
-
- --enable-kde Determines whether to use Qt/KDE vclplug on platforms
- where Qt and KDE are available.
-
- --disable-kdeab Disable the KDE address book support
-
- --disable-binfilter Disable legacy binary file formats filters
-
- --disable-rpath Disable the use of relative paths in shared libraries
-
- --disable-pam Disable pam support.
-
- --enable-pam-link link with libpam instead of dynamically open it
-
- --disable-crypt-link disable linking with libcrypt instead of dynamically
- open it (needed for ancient GNU/Linux distributions
- without crypt()/libcrypt)
-
- --enable-xrender-link link with libXrender instead of dynamically open it
-
- --disable-randr disable RandR support in the vcl project
-
- --enable-minimizer enables the build of the Presentation Minimizer extension
-
- --enable-presenter-screen enables the build of the Presenter Screen extension
-
- --disable-pdfimport disables the build of the PDF Import extension and xpdf
-
- --disable-mediawiki disables the build of the MediaWiki Editor extension
-
- --enable-ogltrans enables the build of the OGLTrans extension
-
- --disable-reportdesign disables the build of the Report Builder extension
-
- --disable-minimizer disables the build of the Presentation Minimizer extension
-
- --disable-neon Disable neon and the compilation of webdav binding
-
- --disable-Xaw Disables the use of Xaw for the Netscape/Mozilla
- plugin
-
- --enable-gcjaot Build with[out] using Ahead of Time java compilation
- support to speed up buildsi by compiling the jars also
- to native code..
- --enable-gcjaot is only known to work with bytecode
- created with gcj or ecj
-
- --enable-check-only Use this option option if you just want to check your
- environment. This option stops the generation of an
- ????env.set
-
- Usage: --enable-check-only=yes
-
- --enable-sgistl for IRIX users, use this option option to build
- OpenOffice.org using SGI's STL.
-
- Usage: --enable-sgistl=yes
-
- --enable-verbose Increase build verbosity.
- --disable-verbose Decrease build verbosity.
-
- --disable-largefile omit support for large files
-
-Optional Packages:
- --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
- --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
- --with-gnu-patch Specify location of GNU patch on Solaris or FreeBSD
-
- --without-agg Disable the use of agg altogether
-
- --with-gnu-cp Specify location of GNU cp on Solaris or FreeBSD
-
- --without-gpc Use the internal polygon clipping code instead of
- the external GPC polygon clipping library.
-
- --with-openldap Enables the use of the OpenLDAP LDAP SDK instead
- of the Netscape/Mozilla one
-
- --with-vba-package-format specify package format for vba compatibility api.
- Specifying "builtin" means the api component and
- associated type library are part of the installation set.
- Specifying "extn" creates an uno extension that is
- part of the installation set ( located in the program
- directory ) that MUST be optionly registered using
- either the unopkg executeable or the extension manager
- gui.
-
- Note: "builtin" is the default, "extn" can cause
- problems.
- Usage: --with-vba-package-format="builtin" or
- --with-vba-package-format="extn"
-
- --without-fonts Removes Bitstream Vera fonts from
- openoffice.org installation set, for people building
- for specific distributions where the fonts are known
- to be already available
-
- --without-ppds Removes Postscript Printer definition files from
- openoffice.org installation set, for people building
- for specific distributions where PPDs are known to be
- already available (every recent distro with CUPS
- backend)
-
- --without-afms Removes bitmap font files from openoffice.org
- installation set, for people building for specific
- distributions where AFM files or TrueType Fonts
- are known to be available.
-
- --with-package-format specify package format(s) for OOo installsets.
- Default is "normal" one of the OS/Distribution.
-
- Usage: --with-package-format="foo bar"
-
- --with-system-stdlibs use libstdc++/libgcc_s already on system
-
- --with-system-mspack use libmspack already installed on system
-
- --with-system-cairo Use cairo libraries already on system
-
- --with-mozilla-version Choose which version of mozilla to use while building
- mozilla. Default: 1.7.5.
- Note that not all versions are supported.
-
- --with-mozilla-toolkit Choose which GUI toolkit to use while building mozilla
- components. Default: gtk2
-
- --without-myspell-dicts Removes myspell dictionaries from openoffice.org
- installation set, for people building for specific
- distributions where the myspell dictionaries are
- installed from other sources
-
- --with-system-dicts Use dictionaries from system paths- Specify
- them via --with-{dict,hyph,thes}-path=/path
- if you want to override the default ones
-
- --with-external-dict-dir Specify external dictionary dir
-
- --with-external-hyph-dir Specify external hyphenation pattern dir
-
- --with-external-thes-dir Specify external thesaurus dir
-
- --without-writer2latex Removes writer2latex from openoffice.org installation
- set, for people building for specific distributions
- where writer2latex is known to be already available
-
- --with-system-libs Use libs already on system -- enables all
- --with-system-* flags except mozilla and
- odbc/sane/xrender-header(s)
-
- --with-system-headers Use headers already on system -- enables all
- --with-system-* flags for external packages
- whose headers are the only entities used i.e.
- boost/vigra/odbc/sane/xrender-header(s)
-
- --without-system-jars When building with --with-system-libs, also the
- needed jars are expected on the system. Use this to
- disable that.
- (except for the db case where --with-system-db
- *has to* imply using the db.jar from there, too)
-
- --with-system-zlib Use zlib already on system
-
- --with-system-openssl Use OpenSSL already on system
-
- --with-system-jpeg Use jpeg already on system
-
- --with-system-expat Use expat already on system
-
- --with-system-freetype Use freetype already on system
-
- --with-system-libwpd Use libwpd already on system
-
- --with-system-libxml Use libxml already on system
-
- --with-system-python Use python already on system
-
- --with-system-icu Use icu already on system
-
- --with-system-db Use berkeley db already on system
-
- --with-system-hsqldb Use hsqldb already on system
-
- --with-hsqldb-jar=JARFILE Specify path to jarfile manually
- --with-system-beanshell Use beanshell already on system
-
- --with-beanshell-jar=JARFILE Specify path to jarfile manually
- --with-commons-codec-jar=JARFILE Specify path to jarfile manually
- --with-commons-lang-jar=JARFILE Specify path to jarfile manually
- --with-commons-httpclient-jar=JARFILE Specify path to jarfile manually
- --with-commons-logging-jar=JARFILE Specify path to jarfile manually
- --servlet-api-jar=JARFILE Specify path to jarfile manually
- --with-system-jfreereport Use JFreeReport already on system
-
- --with-jcommon-jar=JARFILE Specify path to jarfile manually
- --with-sac-jar=JARFILE Specify path to jarfile manually
- --with-libxml-jar=JARFILE Specify path to jarfile manually
- --with-flute-jar=JARFILE Specify path to jarfile manually
- --with-jfreereport-jar=JARFILE Specify path to jarfile manually
- --with-liblayout-jar=JARFILE Specify path to jarfile manually
- --with-libformula-jar=JARFILE Specify path to jarfile manually
- --with-librepository-jar=JARFILE Specify path to jarfile manually
- --with-libfonts-jar=JARFILE Specify path to jarfile manually
- --with-jcommon-serializer-jar=JARFILE Specify path to jarfile manually
- --with-system-xml-apis Use xml-apis already on system
-
- --with-xml-apis-jar=JARFILE Specify path to jarfile manually
- --with-system-xerces Use xerces already on system
-
- --with-xerces-jar=JARFILE Specify path to jarfile manually
- --with-system-xalan Use xalan already on system
-
- --with-xalan-jar=JARFILE Specify path to jarfile manually
- --with-serializer-jar=JARFILE Specify path to jarfile manually
- --with-system-libxslt Use libxslt already on system
-
- --with-system-odbc-headers Use the odbc headers already on system
-
- --with-system-sane-header Use sane.h already on system
-
- --with-system-xrender-headers Use XRender headers already on system
-
- --with-system-curl Use curl already on system
-
- --with-system-boost Use boost already on system
-
- --with-system-vigra Use vigra already on system
-
- --with-system-neon Use neon already on system
-
- --with-system-agg Use AGG already on system
-
- --with-system-hunspell Use libhunspell already on system
-
- --with-system-mythes Use mythes already on system
-
- --with-system-altlinuxhyph Use ALTLinuxhyph already on system
-
- --with-system-lpsolve Use lpsolve already on system
-
- --with-system-mozilla Use mozilla already on system. Note that some
- components cannot be built against a contemporary
- mozilla. The flavour used can be specified by
- --with-system-mozilla=<flavour>. Supported are:
- libxul (default), xulrunner, firefox, seamonkey,
- mozilla
-
- --with-stlport The location that STLport is installed in. The STL
- header files are assumed to be in
- stlport-home/stlport and the STLPort library in
- stlport-home/lib.
-
- Usage: --with-stlport=<absolute path to stlport home>
-
- Warning!!, disabling using --without-stlport or
- enabling using --with-stlport on a platform that
- defaults to the opposite will break ABI compatability
-
- --with-jdk-home if you have installed JDK 1.3 or later on your system
- please supply the path here.
- Note that this is not the location of the Java binary
- but the location of the entire distribution.
-
- Usage: --with-jdk-home=<absolute path to JDK home>
-
- --with-gxx-include-path if you want to override the autodetected g++ include
- path.
-
- Usage: --with-gxx-include-path=<absolute path to g++ include dir>
-
- --with-java Build with[out] Java support. If you use
- --without-java/--with-java=no then the build will have
- no support for Java components, applets, accessibility
- or XML filters.
-
- --with-ant-home If you have installed Jakarta Ant on your system,
- please supply the path here.
- Note that this is not the location of the Ant binary
- but the location of the entire distribution.
-
- Usage: --with-ant-home=<absolute path to Ant home>
-
- --with-perl-home If you have installed the Perl 5 Distribution, on your
- system, please supply the path here.
- Note that this is not the location of the Perl binary
- but the location of the entire distribution.
-
- Usage: --with-perl-home=<absolute path to Perl 5 home>
-
- --with-cl-home For Windows NT users, please supply the path
- for the Microsoft C/C++ compiler.
- Note that this is not the location of the compiler
- binary but the location of the entire distribution.
-
- Usage: --with-cl-home=<absolute path to Microsoft C/C++ compiler home>
-
- --with-mspdb-path For Microsoft C/C++ compiler users, please supply the
- path pointing to the mspdb71.dll (.NET 2003).
-
- Usage: --with-mspdb-path=<absolute path to mspdb71.dll>
-
- --with-midl-path For Microsoft C/C++ .NET compiler users, please supply
- the path pointing to the midl.exe.
-
- Usage: --with-midl-path=<absolute path to midl.exe>
-
- --with-csc-path For Microsoft C/C++ .NET compiler users, please supply
- the path pointing to the csc.exe.
-
- Usage: --with-csc-path=<absolute path to csc.exe>
-
- --with-nsis-path For Windows users, please supply the path to the
- "Nullsoft Scriptable Install System" (NSIS). If NSIS
- is found in the path or this option is supplied a self
- contained executable installer for OpenOffice.org will
- be created.
-
- Usage: --with-nsis-path=<absolute path to nsis.exe>
-
- --with-frame-home For Microsoft C/C++ .NET compiler users, please supply
- the path pointing to lib/mscoree.lib, usually
- something like:
- "/cygdrive/c/Program Files/Microsoft Visual Studio .NET/FrameworkSDK"
-
- MS Visual Toolkit compiler users, please supply the
- path pointing to lib/msvcrt.lib, usually something
- like:
- "/cygdrive/c/Program Files/Microsoft Visual Studio .NET 2003/Vc7"
-
- Usage: --with-frame-home=<absolute path to Framework SDK [home]>
-
- --with-psdk-home For Windows users, please supply the path to the
- Microsoft Platform SDK.
-
- Usage: --with-psdk-home=<absolute path to Microsoft Platform SDK>
-
- --with-directx-home For Windows users, please supply the path to the
- Microsoft DirectX SDK.
-
- Usage: --with-directx-home=<absolute path to Microsoft DirectX SDK>
-
- --with-local-solenv If you have solenv in a location other than ../solenv,
- please supply the path here.
-
- Usage: --with-local-solenv=<absolute path to solenv>
-
- --with-local-solver if you have solver in a location other than ../solver,
- please supply the path here.
-
- Usage: --with-local-solver=<absolute path to solver>
-
- --with-lang Use this option to build OpenOffice.org with
- additional language support. English (US) is always
- included by default. Separate multiple languages with
- space. For all languages, use --with-lang=ALL.
-
- Usage: --with-lang="es sw tu cs sk"
-
- --with-poor-help-localizations
- Use this option to specify which languages have
- unusable help localizations. Separate multiple
- languages with space.
-
- Usage: --with-poor-help-localizations="af ar be-BY ca"
-
- --with-dict Use this option to build OpenOffice.org with
- dictionary support. ALL dictionaries are always
- included by default unless overridden with
- this option. Separate multiple dictionaries with
- commas. For all dictionaries, use --with-dict=ALL.
-
- Usage: --with-dict=ENGB,ENUS,ITIT
-
- --with-intro-bitmaps Prefer the specified intro bitmaps over the
- the default one. Can be more than one (separated by
- commas), the order means priority of fallback if the
- first does not exist (in the installed tree).
-
- Usage: --with-intro-bitmaps=/path/my_ooo_intro.bmp
-
- --with-about-bitmaps Similarly to --with-intro-bitmaps, this allows
- specification of bitmaps for the About box.
-
- Usage: --with-about-bitmaps=/path/my_ooo_about.bmp
-
- --with-vendor Set vendor of the build.
-
- Usage: --with-vendor="John the Builder"
-
- --with-unix-wrapper Redefines the name of the UNIX wrapper that will be used
- in the desktop files and in the desktop-integration RPMs.
-
- Usage: --with-unix-wrapper=ooffice
-
- --with-asm-home For Windows users, please supply the path for the
- ml.exe assembler.
-
- Usage: --with-asm-home=<path to ml.exe directory>
-
- --with-os-version For FreeBSD users, use this option option to override
- the detected OSVERSION.
-
- Usage: --with-os-version=<OSVERSION>
-
- --with-unzip-home Deprecated: use --with-zip-home instead
- --with-zip-home If you use a non standard zip, for example windows
- please supply the path for zip
-
- Usage: --with-zip-home=<path to zip executable>
-
- --with-mingwin For Windows users, use the mingwin32 compiler within
- cygwin environment, this implies --with-use-shell=tcsh
-
- Usage: --with-mingwin=yes
-
- For !Windows use, use the mingw32 C++ compiler to
- (re-) build unowinreg.dll. Specify the MinGW C++
- Compilers name.
-
- Usage: --with-mingwin=i586-mingw32msvc-g++
-
- --with-use-shell Use this option to override the default shell to be
- used for the build environment.
- Supported options:
- tcsh (default)
- bash
- 4nt (windows only)
-
- Usage: --with-use-shell=tcsh|bash|4nt
-
- --with-build-version Allows the builder to add a custom version tag
- that will appear in the Help/About box for QA
- purposes.
-
- Usage: --with-build-version="Built by Jim"
-
- --with-alloc Define which allocator to build with
- (choices are oo, system, tcmalloc)
-
- --with-x use the X Window System
-
-Some influential environment variables:
- CC C compiler command
- CFLAGS C compiler flags
- LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
- nonstandard directory <lib dir>
- LIBS libraries to pass to the linker, e.g. -l<library>
- CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
- you have headers in a nonstandard directory <include dir>
- CPP C preprocessor
- CXX C++ compiler command
- CXXFLAGS C++ compiler flags
- CXXCPP C++ preprocessor
- PKG_CONFIG path to pkg-config utility
- FREETYPE_CFLAGS
- C compiler flags for FREETYPE, overriding pkg-config
- FREETYPE_LIBS
- linker flags for FREETYPE, overriding pkg-config
- LIBWPD_CFLAGS
- C compiler flags for LIBWPD, overriding pkg-config
- LIBWPD_LIBS linker flags for LIBWPD, overriding pkg-config
- LIBXSLT_CFLAGS
- C compiler flags for LIBXSLT, overriding pkg-config
- LIBXSLT_LIBS
- linker flags for LIBXSLT, overriding pkg-config
- LIBXML_CFLAGS
- C compiler flags for LIBXML, overriding pkg-config
- LIBXML_LIBS linker flags for LIBXML, overriding pkg-config
- MOZ_NSS_CFLAGS
- C compiler flags for MOZ_NSS, overriding pkg-config
- MOZ_NSS_LIBS
- linker flags for MOZ_NSS, overriding pkg-config
- MOZ_NSPR_CFLAGS
- C compiler flags for MOZ_NSPR, overriding pkg-config
- MOZ_NSPR_LIBS
- linker flags for MOZ_NSPR, overriding pkg-config
- MOZILLAXPCOM_CFLAGS
- C compiler flags for MOZILLAXPCOM, overriding pkg-config
- MOZILLAXPCOM_LIBS
- linker flags for MOZILLAXPCOM, overriding pkg-config
- MOZGTK2_CFLAGS
- C compiler flags for MOZGTK2, overriding pkg-config
- MOZGTK2_LIBS
- linker flags for MOZGTK2, overriding pkg-config
- MOZLIBREQ_CFLAGS
- C compiler flags for MOZLIBREQ, overriding pkg-config
- MOZLIBREQ_LIBS
- linker flags for MOZLIBREQ, overriding pkg-config
- XMKMF Path to xmkmf, Makefile generator for X Window System
- NEON_CFLAGS C compiler flags for NEON, overriding pkg-config
- NEON_LIBS linker flags for NEON, overriding pkg-config
- OPENSSL_CFLAGS
- C compiler flags for OPENSSL, overriding pkg-config
- OPENSSL_LIBS
- linker flags for OPENSSL, overriding pkg-config
- AGG_CFLAGS C compiler flags for AGG, overriding pkg-config
- AGG_LIBS linker flags for AGG, overriding pkg-config
- HUNSPELL_CFLAGS
- C compiler flags for HUNSPELL, overriding pkg-config
- HUNSPELL_LIBS
- linker flags for HUNSPELL, overriding pkg-config
- GNOMEVFS_CFLAGS
- C compiler flags for GNOMEVFS, overriding pkg-config
- GNOMEVFS_LIBS
- linker flags for GNOMEVFS, overriding pkg-config
- GCONF_CFLAGS
- C compiler flags for GCONF, overriding pkg-config
- GCONF_LIBS linker flags for GCONF, overriding pkg-config
- GTK_CFLAGS C compiler flags for GTK, overriding pkg-config
- GTK_LIBS linker flags for GTK, overriding pkg-config
- DBUS_CFLAGS C compiler flags for DBUS, overriding pkg-config
- DBUS_LIBS linker flags for DBUS, overriding pkg-config
- GIO_CFLAGS C compiler flags for GIO, overriding pkg-config
- GIO_LIBS linker flags for GIO, overriding pkg-config
- CAIRO_CFLAGS
- C compiler flags for CAIRO, overriding pkg-config
- CAIRO_LIBS linker flags for CAIRO, overriding pkg-config
- GOBJECT_CFLAGS
- C compiler flags for GOBJECT, overriding pkg-config
- GOBJECT_LIBS
- linker flags for GOBJECT, overriding pkg-config
-
-Use these variables to override the choices made by `configure' or to help
-it to find libraries and programs with nonstandard names/locations.
-
Deleted: parallel_build.diff
===================================================================
--- parallel_build.diff 2008-08-09 12:38:50 UTC (rev 8213)
+++ parallel_build.diff 2008-08-09 13:01:07 UTC (rev 8214)
@@ -1,18 +0,0 @@
-Index: settings.mk
-===================================================================
-RCS file: /cvs/tools/solenv/inc/settings.mk,v
-retrieving revision 1.236
-diff -u -r1.236 settings.mk
---- solenv/inc/settings.mk 17 Jul 2008 13:37:59 -0000 1.236
-+++ solenv/inc/settings.mk 24 Jul 2008 17:44:53 -0000
-@@ -622,7 +622,10 @@
- @$(MKOUT) $(ROUT)
- @echo $(EMQ)# > $@
-
-+# don't need/want output trees in solenv!!!
-+.IF "$(PRJNAME)"!="solenv"
- .INCLUDE : $(OUT)$/inc$/myworld.mk
-+.ENDIF # "$(PRJNAME)"!="solenv"
-
- .IF "$(common_build)"!=""
- $(LOCAL_COMMON_OUT)$/inc$/%world.mk :
Deleted: scp2-without-myspell-dicts.diff
===================================================================
--- scp2-without-myspell-dicts.diff 2008-08-09 12:38:50 UTC (rev 8213)
+++ scp2-without-myspell-dicts.diff 2008-08-09 13:01:07 UTC (rev 8214)
@@ -1,43 +0,0 @@
-Index: ooo/file_ooo.scp
-===================================================================
-RCS file: /cvs/installation/scp2/source/ooo/file_ooo.scp,v
-retrieving revision 1.248.8.1
-diff -u -u -r1.248.8.1 file_ooo.scp
---- scp2/source/ooo/file_ooo.scp 30 Jun 2008 17:07:17 -0000 1.248.8.1
-+++ scp2/source/ooo/file_ooo.scp 2 Jul 2008 23:14:23 -0000
-@@ -2923,6 +2923,8 @@
- Name = "/registry/data/org/openoffice/Office/Linguistic-lingucomponent-thesaurus.xcu";
- End
-
-+#ifndef WITHOUT_MYSPELL_DICTS
-+
- // Dictionary extensions
-
- File gid_File_Extension_Dictionary_Af
-@@ -3078,3 +3080,5 @@
- Styles = (PACKED);
- UnixRights = 444;
- End
-+
-+#endif
-Index: ooo/makefile.mk
-===================================================================
-RCS file: /cvs/installation/scp2/source/ooo/makefile.mk,v
-retrieving revision 1.69
-diff -u -u -r1.69 makefile.mk
---- scp2/source/ooo/makefile.mk 9 Jun 2008 12:51:56 -0000 1.69
-+++ scp2/source/ooo/makefile.mk 2 Jul 2008 23:14:23 -0000
-@@ -119,6 +119,10 @@
- SCPDEFS+=-DWITHOUT_MOZILLA
- .ENDIF
-
-+.IF "$(WITH_MYSPELL_DICTS)" == "NO"
-+SCPDEFS+=-DWITHOUT_MYSPELL_DICTS
-+.ENDIF
-+
- .IF "$(SYSTEM_MOZILLA)" == "YES"
- SCPDEFS+=-DSYSTEM_MOZILLA
- .ENDIF
-
-
-
More information about the arch-commits
mailing list