[arch-commits] Commit in wpa_supplicant/trunk (PKGBUILD config)

Thomas Bächler thomas at archlinux.org
Sat Feb 28 18:46:14 UTC 2009


    Date: Saturday, February 28, 2009 @ 13:46:14
  Author: thomas
Revision: 28313

upgpkg: wpa_supplicant 0.6.8-1

Modified:
  wpa_supplicant/trunk/PKGBUILD
  wpa_supplicant/trunk/config

----------+
 PKGBUILD |   29 +++++-------
 config   |  144 ++++++++++++++++++++++++++++++++++++++++++++++---------------
 2 files changed, 123 insertions(+), 50 deletions(-)

Modified: PKGBUILD
===================================================================
--- PKGBUILD	2009-02-28 18:46:06 UTC (rev 28312)
+++ PKGBUILD	2009-02-28 18:46:14 UTC (rev 28313)
@@ -1,32 +1,31 @@
-# Contributor: iztok pizorn <pizorn at gmail.com>
-# Contributor: William Rea <sillywilly at gmail.com>
+# $Id$
+# Maintainer: Thomas Baechler <thomas at archlinux.org>
+
 pkgname=wpa_supplicant
-pkgver=0.5.11
-_madwifi_ver=0.9.4
+pkgver=0.6.8
+#_madwifi_ver=0.9.4
 pkgrel=1
 pkgdesc="A utility providing key negotiation for WPA wireless networks"
 arch=('i686' 'x86_64')
-makedepends=('kernel26>=2.6.27' 'kernel26<2.6.28')
-depends=('openssl' 'dbus-core>=1.2.4')
+depends=('openssl' 'dbus-core>=1.2.4' 'readline' 'libnl')
 optdepends=('wpa_supplicant_gui: wpa_gui program')
 license=('GPL')
 groups=('base')
 backup=('etc/wpa_supplicant.conf')
 url="http://hostap.epitest.fi/wpa_supplicant"
 source=(http://hostap.epitest.fi/releases/wpa_supplicant-$pkgver.tar.gz
-        config
-	http://downloads.sourceforge.net/sourceforge/madwifi/madwifi-${_madwifi_ver}.tar.gz)
-md5sums=('ad320af63f735531878e592f1ffd9b06'
-         '94fb8071fc440dca8294c9591486921f'
-         '399d20de8d855a59f20058857c2178ad')
+        config)
+        #http://downloads.sourceforge.net/sourceforge/madwifi/madwifi-${_madwifi_ver}.tar.gz)
+md5sums=('e933332490e0e5acfef2279457f1070a'
+         'd472554904cca44e1090e25dea7b03c9')
+         #'399d20de8d855a59f20058857c2178ad')
 
 build() {
   cd "${srcdir}"
-  mv madwifi-${_madwifi_ver} madwifi
-  cd "${srcdir}/${pkgname}-${pkgver}"
-  cp ../config ./.config
+  #mv madwifi-${_madwifi_ver} madwifi
+  cd "${srcdir}/${pkgname}-${pkgver}/${pkgname}"
+  cp ${srcdir}/config ./.config
   sed -i 's@/usr/local@$(PREFIX)@g' Makefile
-  sed -i 's at dynamic_eap_methods@@g' Makefile
   make || return 1
   make PREFIX=/usr DESTDIR="${pkgdir}" install || return 1
   install -m755 -d "${pkgdir}/etc"

Modified: config
===================================================================
--- config	2009-02-28 18:46:06 UTC (rev 28312)
+++ config	2009-02-28 18:46:14 UTC (rev 28313)
@@ -41,7 +41,7 @@
 
 
 # Driver interface for Host AP driver
-CONFIG_DRIVER_HOSTAP=y
+#CONFIG_DRIVER_HOSTAP=y
 
 # Driver interface for Agere driver
 #CONFIG_DRIVER_HERMES=y
@@ -50,14 +50,14 @@
 #CFLAGS += -I../../include/wireless
 
 # Driver interface for madwifi driver
-CONFIG_DRIVER_MADWIFI=y
-# Change include directories to match with the local setup
-CFLAGS += -I../madwifi
+#CONFIG_DRIVER_MADWIFI=y
+# Set include directory to the madwifi source tree
+#CFLAGS += -I../../madwifi
 
 # Driver interface for Prism54 driver
 # (Note: Prism54 is not yet supported, i.e., this will not work as-is and is
 # for developers only)
-CONFIG_DRIVER_PRISM54=y
+#CONFIG_DRIVER_PRISM54=y
 
 # Driver interface for ndiswrapper
 CONFIG_DRIVER_NDISWRAPPER=y
@@ -65,17 +65,26 @@
 # Driver interface for Atmel driver
 CONFIG_DRIVER_ATMEL=y
 
-# Driver interface for Broadcom driver
+# Driver interface for old Broadcom driver
+# Please note that the newer Broadcom driver ("hybrid Linux driver") supports
+# Linux wireless extensions and does not need (or even work) with the old
+# driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver.
 #CONFIG_DRIVER_BROADCOM=y
 # Example path for wlioctl.h; change to match your configuration
 #CFLAGS += -I/opt/WRT54GS/release/src/include
 
 # Driver interface for Intel ipw2100/2200 driver
-CONFIG_DRIVER_IPW=y
+#CONFIG_DRIVER_IPW=y
 
+# Driver interface for Ralink driver
+#CONFIG_DRIVER_RALINK=y
+
 # Driver interface for generic Linux wireless extensions
 CONFIG_DRIVER_WEXT=y
 
+# Driver interface for Linux drivers using the nl80211 kernel interface
+CONFIG_DRIVER_NL80211=y
+
 # Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
 #CONFIG_DRIVER_BSD=y
 #CFLAGS += -I/usr/local/include
@@ -103,6 +112,9 @@
 # Driver interface for wired Ethernet drivers
 CONFIG_DRIVER_WIRED=y
 
+# Driver interface for the Broadcom RoboSwitch family
+#CONFIG_DRIVER_ROBOSWITCH=y
+
 # Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
 # included)
 CONFIG_IEEE8021X_EAPOL=y
@@ -122,6 +134,13 @@
 # EAP-TTLS
 CONFIG_EAP_TTLS=y
 
+# EAP-FAST
+# Note: Default OpenSSL package does not include support for all the
+# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
+# the OpenSSL library must be patched (openssl-0.9.8d-tls-extensions.patch)
+# to add the needed functions.
+#CONFIG_EAP_FAST=y
+
 # EAP-GTC
 CONFIG_EAP_GTC=y
 
@@ -143,6 +162,13 @@
 # EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
 #CONFIG_EAP_AKA=y
 
+# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
+# This requires CONFIG_EAP_AKA to be enabled, too.
+#CONFIG_EAP_AKA_PRIME=y
+
+# Enable USIM simulator (Milenage) for EAP-AKA
+#CONFIG_USIM_SIMULATOR=y
+
 # EAP-SAKE
 #CONFIG_EAP_SAKE=y
 
@@ -151,6 +177,15 @@
 # Include support for optional SHA256 cipher suite in EAP-GPSK
 #CONFIG_EAP_GPSK_SHA256=y
 
+# EAP-TNC and related Trusted Network Connect support (experimental)
+#CONFIG_EAP_TNC=y
+
+# Wi-Fi Protected Setup (WPS)
+CONFIG_WPS=y
+
+# EAP-IKEv2
+#CONFIG_EAP_IKEV2=y
+
 # PKCS#12 (PFX) support (used to read private key and certificate file from
 # a file that usually has extension .p12 or .pfx)
 CONFIG_PKCS12=y
@@ -166,13 +201,10 @@
 # Development testing
 #CONFIG_EAPOL_TEST=y
 
-# Replace native Linux implementation of packet sockets with libdnet/libpcap.
-# This will be automatically set for non-Linux OS.
-#CONFIG_DNET_PCAP=y
-
 # Select control interface backend for external programs, e.g, wpa_cli:
 # unix = UNIX domain sockets (default for Linux/*BSD)
-# udp = UDP sockets (default for Windows)
+# udp = UDP sockets using localhost (127.0.0.1)
+# named_pipe = Windows Named Pipe (default for Windows)
 # y = use default (backwards compatibility)
 # If this option is commented out, control interface is not included in the
 # build.
@@ -182,7 +214,7 @@
 # When building a wpa_cli binary for distribution, please note that these
 # libraries are licensed under GPL and as such, BSD license may not apply for
 # the resulting binary.
-#CONFIG_READLINE=y
+CONFIG_READLINE=y
 
 # Remove debugging code that is printing out debug message to stdout.
 # This can be used to reduce the size of the wpa_supplicant considerably
@@ -199,16 +231,39 @@
 # or 6 kB if building for WPA-Enterprise.
 #CONFIG_NO_WPA2=y
 
+# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
+# This option can be used to reduce code size by removing support for
+# converting ASCII passphrases into PSK. If this functionality is removed, the
+# PSK can only be configured as the 64-octet hexstring (e.g., from
+# wpa_passphrase). This saves about 0.5 kB in code size.
+#CONFIG_NO_WPA_PASSPHRASE=y
+
 # Remove AES extra functions. This can be used to reduce code size by about
 # 1.5 kB by removing extra AES modes that are not needed for commonly used
 # client configurations (they are needed for some EAP types).
 #CONFIG_NO_AES_EXTRAS=y
 
+# Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
+# This can be used if ap_scan=1 mode is never enabled.
+#CONFIG_NO_SCAN_PROCESSING=y
+
 # Select configuration backend:
-# file = text file (e.g., wpa_supplicant.conf)
+# file = text file (e.g., wpa_supplicant.conf; note: the configuration file
+#	path is given on command line, not here; this option is just used to
+#	select the backend that allows configuration files to be used)
 # winreg = Windows registry (see win_example.reg for an example)
 CONFIG_BACKEND=file
 
+# Remove configuration write functionality (i.e., to allow the configuration
+# file to be updated based on runtime configuration changes). The runtime
+# configuration can still be changed, the changes are just not going to be
+# persistent over restarts. This option can be used to reduce code size by
+# about 3.5 kB.
+#CONFIG_NO_CONFIG_WRITE=y
+
+# Remove support for configuration blobs to reduce code size by about 1.5 kB.
+#CONFIG_NO_CONFIG_BLOBS=y
+
 # Select program entry point implementation:
 # main = UNIX/POSIX like main() function (default)
 # main_winsvc = Windows service (read parameters from registry)
@@ -236,13 +291,15 @@
 # none = Empty template
 #CONFIG_L2_PACKET=linux
 
-# IEEE 802.11i/IEEE 802.11e STAKey negotiation for direct link connection
-#CONFIG_STAKEY=y
-
-# Proposed replacement for STAKey negotiation: PeerKey handshake for
-# Station to Station Link
+# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
 CONFIG_PEERKEY=y
 
+# IEEE 802.11w (management frame protection)
+# This version is an experimental implementation based on IEEE 802.11w/D1.0
+# draft and is subject to change since the standard has not yet been finalized.
+# Driver support is also needed for IEEE 802.11w.
+#CONFIG_IEEE80211W=y
+
 # Select TLS implementation
 # openssl = OpenSSL (default)
 # gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA)
@@ -259,14 +316,22 @@
 #CONFIG_GNUTLS_EXTRA=y
 
 # If CONFIG_TLS=internal is used, additional library and include paths are
-# needed for LibTomCrypt and TomsFastMath.
-#LTC_PATH=/usr/src/libtomcrypt-1.11
-#TFM_PATH=/usr/src/tomsfastmath-0.09
-#CFLAGS += -I$(LTC_PATH)/src/headers
-#LIBS += -L$(LTC_PATH) -L$(TFM_PATH)
-#LIBS_p += -L$(LTC_PATH) -L$(TFM_PATH)
+# needed for LibTomMath. Alternatively, an integrated, minimal version of
+# LibTomMath can be used. See beginning of libtommath.c for details on benefits
+# and drawbacks of this option.
+#CONFIG_INTERNAL_LIBTOMMATH=y
+#ifndef CONFIG_INTERNAL_LIBTOMMATH
+#LTM_PATH=/usr/src/libtommath-0.39
+#CFLAGS += -I$(LTM_PATH)
+#LIBS += -L$(LTM_PATH)
+#LIBS_p += -L$(LTM_PATH)
+#endif
+# At the cost of about 4 kB of additional binary size, the internal LibTomMath
+# can be configured to include faster routines for exptmod, sqr, and div to
+# speed up DH and RSA calculation considerably
+#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
 
-# Integrate ndis_events.exe functionality into wpa_supplicant.
+# Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
 # This is only for Windows builds and requires WMI-related header files and
 # WbemUuid.Lib from Platform SDK even when building with MinGW.
 #CONFIG_NDIS_EVENTS_INTEGRATED=y
@@ -294,15 +359,24 @@
 # Please also note that using dynamic libraries will increase the total binary
 # size. Thus, it may not be the best option for targets that have limited
 # amount of memory/flash.
-CONFIG_DYNAMIC_EAP_METHODS=y
+#CONFIG_DYNAMIC_EAP_METHODS=y
 
 # Include client MLME (management frame processing).
-# This can be used to move MLME processing of Devicescape IEEE 802.11 stack
-# into user space.
+# This can be used to move MLME processing of Linux mac80211 stack into user
+# space. Please note that this is currently only available with
+# driver_nl80211.c and only with a modified version of Linux kernel and
+# wpa_supplicant.
 #CONFIG_CLIENT_MLME=y
-# Currently, driver_devicescape.c build requires some additional parameters
-# to be able to include some of the kernel header files. Following lines can
-# be used to set these (WIRELESS_DEV must point to the root directory of the
-# wireless-dev.git tree).
-WIRELESS_DEV=/lib/modules/2.6.27-ARCH/build
-CFLAGS += -I$(WIRELESS_DEV)/net/mac80211
+
+# IEEE Std 802.11r-2008 (Fast BSS Transition)
+#CONFIG_IEEE80211R=y
+
+# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
+#CONFIG_DEBUG_FILE=y
+
+# Enable privilege separation (see README 'Privilege separation' for details)
+#CONFIG_PRIVSEP=y
+
+# Enable mitigation against certain attacks against TKIP by delaying Michael
+# MIC error reports by a random amount of time between 0 and 60 seconds
+#CONFIG_DELAYED_MIC_ERROR_REPORT=y




More information about the arch-commits mailing list