[arch-commits] Commit in mdadm/repos (19 files)

Tobias Powalowski tpowa at archlinux.org
Mon Apr 30 03:17:52 EDT 2012


    Date: Monday, April 30, 2012 @ 03:17:52
  Author: tpowa
Revision: 157940

db-move: moved mdadm from [testing] to [core] (i686)

Added:
  mdadm/repos/core-i686/PKGBUILD
    (from rev 157938, mdadm/repos/testing-i686/PKGBUILD)
  mdadm/repos/core-i686/disable-werror.patch
    (from rev 157938, mdadm/repos/testing-i686/disable-werror.patch)
  mdadm/repos/core-i686/linux-3.0.patch
    (from rev 157938, mdadm/repos/testing-i686/linux-3.0.patch)
  mdadm/repos/core-i686/mdadm
    (from rev 157938, mdadm/repos/testing-i686/mdadm)
  mdadm/repos/core-i686/mdadm.conf
    (from rev 157938, mdadm/repos/testing-i686/mdadm.conf)
  mdadm/repos/core-i686/mdadm.install
    (from rev 157938, mdadm/repos/testing-i686/mdadm.install)
  mdadm/repos/core-i686/mdadm_hook
    (from rev 157938, mdadm/repos/testing-i686/mdadm_hook)
  mdadm/repos/core-i686/mdadm_install
    (from rev 157938, mdadm/repos/testing-i686/mdadm_install)
  mdadm/repos/core-i686/mdadm_udev_install
    (from rev 157938, mdadm/repos/testing-i686/mdadm_udev_install)
Deleted:
  mdadm/repos/core-i686/PKGBUILD
  mdadm/repos/core-i686/disable-werror.patch
  mdadm/repos/core-i686/linux-3.0.patch
  mdadm/repos/core-i686/mdadm
  mdadm/repos/core-i686/mdadm.conf
  mdadm/repos/core-i686/mdadm.install
  mdadm/repos/core-i686/mdadm_hook
  mdadm/repos/core-i686/mdadm_install
  mdadm/repos/core-i686/mdadm_udev_install
  mdadm/repos/testing-i686/

----------------------+
 PKGBUILD             |  106 +++++++++++++++++++-------------------
 disable-werror.patch |   22 ++++----
 linux-3.0.patch      |   90 ++++++++++++++++----------------
 mdadm                |   74 +++++++++++++--------------
 mdadm.conf           |  134 ++++++++++++++++++++++++-------------------------
 mdadm.install        |   20 +++----
 mdadm_hook           |   88 ++++++++++++++++----------------
 mdadm_install        |   90 ++++++++++++++++----------------
 mdadm_udev_install   |   46 ++++++++--------
 9 files changed, 335 insertions(+), 335 deletions(-)

Deleted: core-i686/PKGBUILD
===================================================================
--- core-i686/PKGBUILD	2012-04-30 07:17:50 UTC (rev 157939)
+++ core-i686/PKGBUILD	2012-04-30 07:17:52 UTC (rev 157940)
@@ -1,53 +0,0 @@
-# $Id$
-# Maintainer: Tobias Powalowski <tpowa at archlinux.org>
-# Contributor: Judd Vinet <jvinet at zeroflux.org>
-pkgname=mdadm
-pkgver=3.2.3
-pkgrel=1
-pkgdesc="A tool for managing/monitoring Linux md device arrays, also known as Software RAID"
-arch=(i686 x86_64)
-license=('GPL')
-url="http://neil.brown.name/blog/mdadm"
-groups=('base')
-conflicts=('mkinitcpio<0.7')
-depends=('glibc')
-backup=('etc/mdadm.conf')
-source=(ftp://ftp.kernel.org/pub/linux/utils/raid/mdadm/mdadm-$pkgver.tar.bz2
-        mdadm 
-        mdadm.conf 
-        mdadm_install
-        mdadm_hook
-        mdadm_udev_install
-        disable-werror.patch)
-
-install=mdadm.install
-replaces=('raidtools')
-md5sums=('d789d6ecb9c1d5ebcc64f0fc52bca92f'
-         '6df172c8f77b280018cf87eb3d313f29'
-         '00cbed931db4f15b6ce49e3e7d433966'
-         '9b01e96b6c3c218fb61628c9281fe688'
-         'c8c0713f5c7da51822ee6f3911473a1c'
-         'cd258e1bf430c02a25f40b4329df9f57'
-         '4ad87b74a4bc9a34621280abe0e0c3e4')
-
-build() {
-  cd $srcdir/$pkgname-$pkgver
-  patch -Np0 -i ../disable-werror.patch
-  make CXFLAGS="$CFLAGS"
-  # build static mdassemble for Arch's initramfs
-  make MDASSEMBLE_AUTO=1 mdassemble
-  
-}
-
-package() {
-  cd $srcdir/$pkgname-$pkgver
-  make INSTALL=/bin/install DESTDIR=$pkgdir install
-  install -D -m755 mdassemble $pkgdir/sbin/mdassemble
-  install -D -m644 ../mdadm.conf $pkgdir/etc/mdadm.conf
-  install -D -m755 ../mdadm $pkgdir/etc/rc.d/mdadm
-  install -D -m644 ../mdadm_install $pkgdir/lib/initcpio/install/mdadm
-  install -D -m644 ../mdadm_hook $pkgdir/lib/initcpio/hooks/mdadm
-  install -D -m644 ../mdadm_udev_install $pkgdir/lib/initcpio/install/mdadm_udev
-  # symlink for backward compatibility
-  ln -sf /lib/initcpio/hooks/mdadm  $pkgdir/lib/initcpio/hooks/raid
-}

Copied: mdadm/repos/core-i686/PKGBUILD (from rev 157938, mdadm/repos/testing-i686/PKGBUILD)
===================================================================
--- core-i686/PKGBUILD	                        (rev 0)
+++ core-i686/PKGBUILD	2012-04-30 07:17:52 UTC (rev 157940)
@@ -0,0 +1,53 @@
+# $Id$
+# Maintainer: Tobias Powalowski <tpowa at archlinux.org>
+# Contributor: Judd Vinet <jvinet at zeroflux.org>
+pkgname=mdadm
+pkgver=3.2.3
+pkgrel=2
+pkgdesc="A tool for managing/monitoring Linux md device arrays, also known as Software RAID"
+arch=(i686 x86_64)
+license=('GPL')
+url="http://neil.brown.name/blog/mdadm"
+groups=('base')
+conflicts=('mkinitcpio<0.7')
+depends=('glibc')
+backup=('etc/mdadm.conf')
+source=(ftp://ftp.kernel.org/pub/linux/utils/raid/mdadm/mdadm-$pkgver.tar.bz2
+        mdadm 
+        mdadm.conf 
+        mdadm_install
+        mdadm_hook
+        mdadm_udev_install
+        disable-werror.patch)
+
+install=mdadm.install
+replaces=('raidtools')
+md5sums=('d789d6ecb9c1d5ebcc64f0fc52bca92f'
+         '6df172c8f77b280018cf87eb3d313f29'
+         '00cbed931db4f15b6ce49e3e7d433966'
+         '9b01e96b6c3c218fb61628c9281fe688'
+         'c8c0713f5c7da51822ee6f3911473a1c'
+         'cd258e1bf430c02a25f40b4329df9f57'
+         '4ad87b74a4bc9a34621280abe0e0c3e4')
+
+build() {
+  cd $srcdir/$pkgname-$pkgver
+  patch -Np0 -i ../disable-werror.patch
+  make CXFLAGS="$CFLAGS"
+  # build static mdassemble for Arch's initramfs
+  make MDASSEMBLE_AUTO=1 mdassemble
+  
+}
+
+package() {
+  cd $srcdir/$pkgname-$pkgver
+  make INSTALL=/usr/bin/install DESTDIR=$pkgdir install
+  install -D -m755 mdassemble $pkgdir/sbin/mdassemble
+  install -D -m644 ../mdadm.conf $pkgdir/etc/mdadm.conf
+  install -D -m755 ../mdadm $pkgdir/etc/rc.d/mdadm
+  install -D -m644 ../mdadm_install $pkgdir/usr/lib/initcpio/install/mdadm
+  install -D -m644 ../mdadm_hook $pkgdir/usr/lib/initcpio/hooks/mdadm
+  install -D -m644 ../mdadm_udev_install $pkgdir/usr/lib/initcpio/install/mdadm_udev
+  # symlink for backward compatibility
+  ln -sf /usr/lib/initcpio/hooks/mdadm  $pkgdir/usr/lib/initcpio/hooks/raid
+}

Deleted: core-i686/disable-werror.patch
===================================================================
--- core-i686/disable-werror.patch	2012-04-30 07:17:50 UTC (rev 157939)
+++ core-i686/disable-werror.patch	2012-04-30 07:17:52 UTC (rev 157940)
@@ -1,11 +0,0 @@
---- Makefile.old	2011-06-17 09:38:03.269238332 +0200
-+++ Makefile	2011-06-17 09:38:14.122398837 +0200
-@@ -42,7 +42,7 @@
- 
- CC = $(CROSS_COMPILE)gcc
- CXFLAGS = -ggdb
--CWFLAGS = -Wall -Werror -Wstrict-prototypes -Wextra -Wno-unused-parameter
-+CWFLAGS = -Wall -Wstrict-prototypes -Wextra -Wno-unused-parameter
- ifdef WARN_UNUSED
- CWFLAGS += -Wp,-D_FORTIFY_SOURCE=2 -O
- endif

Copied: mdadm/repos/core-i686/disable-werror.patch (from rev 157938, mdadm/repos/testing-i686/disable-werror.patch)
===================================================================
--- core-i686/disable-werror.patch	                        (rev 0)
+++ core-i686/disable-werror.patch	2012-04-30 07:17:52 UTC (rev 157940)
@@ -0,0 +1,11 @@
+--- Makefile.old	2011-06-17 09:38:03.269238332 +0200
++++ Makefile	2011-06-17 09:38:14.122398837 +0200
+@@ -42,7 +42,7 @@
+ 
+ CC = $(CROSS_COMPILE)gcc
+ CXFLAGS = -ggdb
+-CWFLAGS = -Wall -Werror -Wstrict-prototypes -Wextra -Wno-unused-parameter
++CWFLAGS = -Wall -Wstrict-prototypes -Wextra -Wno-unused-parameter
+ ifdef WARN_UNUSED
+ CWFLAGS += -Wp,-D_FORTIFY_SOURCE=2 -O
+ endif

Deleted: core-i686/linux-3.0.patch
===================================================================
--- core-i686/linux-3.0.patch	2012-04-30 07:17:50 UTC (rev 157939)
+++ core-i686/linux-3.0.patch	2012-04-30 07:17:52 UTC (rev 157940)
@@ -1,45 +0,0 @@
-From f161d047eed634b3380262767f955eb888502e88 Mon Sep 17 00:00:00 2001
-From: NeilBrown <neilb at suse.de>
-Date: Fri, 17 Jun 2011 22:49:24 +1000
-Subject: [PATCH 1/1] util: correctly parse shorter linux version numbers.
-
-The next version of Linux might be 3.0.  If it is, get_linux_version
-will fail.
-So make it more robust.
-
-Reported-by: Namhyung Kim <namhyung at gmail.com>
-Reported-by: Milan Broz <mbroz at redhat.com>
-Signed-off-by: NeilBrown <neilb at suse.de>
----
- util.c |   10 +++++-----
- 1 files changed, 5 insertions(+), 5 deletions(-)
-
-diff --git a/util.c b/util.c
-index 10bbe56..55d171a 100644
---- a/util.c
-+++ b/util.c
-@@ -146,16 +146,16 @@ int get_linux_version()
- {
- 	struct utsname name;
- 	char *cp;
--	int a,b,c;
-+	int a = 0, b = 0,c = 0;
- 	if (uname(&name) <0)
- 		return -1;
- 
- 	cp = name.release;
- 	a = strtoul(cp, &cp, 10);
--	if (*cp != '.') return -1;
--	b = strtoul(cp+1, &cp, 10);
--	if (*cp != '.') return -1;
--	c = strtoul(cp+1, NULL, 10);
-+	if (*cp == '.')
-+		b = strtoul(cp+1, &cp, 10);
-+	if (*cp == '.')
-+		c = strtoul(cp+1, &cp, 10);
- 
- 	return (a*1000000)+(b*1000)+c;
- }
--- 
-1.7.2.3
-

Copied: mdadm/repos/core-i686/linux-3.0.patch (from rev 157938, mdadm/repos/testing-i686/linux-3.0.patch)
===================================================================
--- core-i686/linux-3.0.patch	                        (rev 0)
+++ core-i686/linux-3.0.patch	2012-04-30 07:17:52 UTC (rev 157940)
@@ -0,0 +1,45 @@
+From f161d047eed634b3380262767f955eb888502e88 Mon Sep 17 00:00:00 2001
+From: NeilBrown <neilb at suse.de>
+Date: Fri, 17 Jun 2011 22:49:24 +1000
+Subject: [PATCH 1/1] util: correctly parse shorter linux version numbers.
+
+The next version of Linux might be 3.0.  If it is, get_linux_version
+will fail.
+So make it more robust.
+
+Reported-by: Namhyung Kim <namhyung at gmail.com>
+Reported-by: Milan Broz <mbroz at redhat.com>
+Signed-off-by: NeilBrown <neilb at suse.de>
+---
+ util.c |   10 +++++-----
+ 1 files changed, 5 insertions(+), 5 deletions(-)
+
+diff --git a/util.c b/util.c
+index 10bbe56..55d171a 100644
+--- a/util.c
++++ b/util.c
+@@ -146,16 +146,16 @@ int get_linux_version()
+ {
+ 	struct utsname name;
+ 	char *cp;
+-	int a,b,c;
++	int a = 0, b = 0,c = 0;
+ 	if (uname(&name) <0)
+ 		return -1;
+ 
+ 	cp = name.release;
+ 	a = strtoul(cp, &cp, 10);
+-	if (*cp != '.') return -1;
+-	b = strtoul(cp+1, &cp, 10);
+-	if (*cp != '.') return -1;
+-	c = strtoul(cp+1, NULL, 10);
++	if (*cp == '.')
++		b = strtoul(cp+1, &cp, 10);
++	if (*cp == '.')
++		c = strtoul(cp+1, &cp, 10);
+ 
+ 	return (a*1000000)+(b*1000)+c;
+ }
+-- 
+1.7.2.3
+

Deleted: core-i686/mdadm
===================================================================
--- core-i686/mdadm	2012-04-30 07:17:50 UTC (rev 157939)
+++ core-i686/mdadm	2012-04-30 07:17:52 UTC (rev 157940)
@@ -1,37 +0,0 @@
-#!/bin/bash
-
-. /etc/rc.conf
-. /etc/rc.d/functions
-
-PID=`pidof -o %PPID /sbin/mdadm`
-case "$1" in
-  start)
-    stat_busy "Starting mdadm RAID Monitor"
-    if [ -z "$PID" ]; then 
-       /sbin/mdadm --monitor --scan -i /var/run/mdadm.pid -f
-    fi
-    if [ ! -z "$PID" -o $? -gt 0 ]; then
-      stat_fail
-    else
-      add_daemon mdadm
-      stat_done
-    fi
-    ;;
-  stop)
-    stat_busy "Stopping mdadm RAID Monitor"
-    [ ! -z "$PID" ] && kill $PID &>/dev/null
-    if [ $? -gt 0 ]; then
-      stat_fail
-    else
-      rm_daemon mdadm
-      stat_done
-    fi
-    ;;
-  restart)
-    $0 stop
-    sleep 1
-    $0 start
-    ;;
-  *)
-    echo "usage: $0 {start|stop|restart}"  
-esac

Copied: mdadm/repos/core-i686/mdadm (from rev 157938, mdadm/repos/testing-i686/mdadm)
===================================================================
--- core-i686/mdadm	                        (rev 0)
+++ core-i686/mdadm	2012-04-30 07:17:52 UTC (rev 157940)
@@ -0,0 +1,37 @@
+#!/bin/bash
+
+. /etc/rc.conf
+. /etc/rc.d/functions
+
+PID=`pidof -o %PPID /sbin/mdadm`
+case "$1" in
+  start)
+    stat_busy "Starting mdadm RAID Monitor"
+    if [ -z "$PID" ]; then 
+       /sbin/mdadm --monitor --scan -i /var/run/mdadm.pid -f
+    fi
+    if [ ! -z "$PID" -o $? -gt 0 ]; then
+      stat_fail
+    else
+      add_daemon mdadm
+      stat_done
+    fi
+    ;;
+  stop)
+    stat_busy "Stopping mdadm RAID Monitor"
+    [ ! -z "$PID" ] && kill $PID &>/dev/null
+    if [ $? -gt 0 ]; then
+      stat_fail
+    else
+      rm_daemon mdadm
+      stat_done
+    fi
+    ;;
+  restart)
+    $0 stop
+    sleep 1
+    $0 start
+    ;;
+  *)
+    echo "usage: $0 {start|stop|restart}"  
+esac

Deleted: core-i686/mdadm.conf
===================================================================
--- core-i686/mdadm.conf	2012-04-30 07:17:50 UTC (rev 157939)
+++ core-i686/mdadm.conf	2012-04-30 07:17:52 UTC (rev 157940)
@@ -1,67 +0,0 @@
-# mdadm configuration file
-#
-# mdadm will function properly without the use of a configuration file,
-# but this file is useful for keeping track of arrays and member disks.
-# In general, a mdadm.conf file is created, and updated, after arrays
-# are created. This is the opposite behavior of /etc/raidtab which is
-# created prior to array construction.
-#
-#
-# the config file takes two types of lines:
-#
-#	DEVICE lines specify a list of devices of where to look for
-#	  potential member disks
-#
-#	ARRAY lines specify information about how to identify arrays so
-#	  so that they can be activated
-#
-
-
-# You can have more than one device line and use wild cards. The first 
-# example includes SCSI the first partition of SCSI disks /dev/sdb,
-# /dev/sdc, /dev/sdd, /dev/sdj, /dev/sdk, and /dev/sdl. The second 
-# line looks for array slices on IDE disks.
-#
-#DEVICE /dev/sd[bcdjkl]1
-#DEVICE /dev/hda1 /dev/hdb1
-#
-# The designation "partitions" will scan all partitions found in
-# /proc/partitions
-DEVICE partitions
-
-
-# ARRAY lines specify an array to assemble and a method of identification.
-# Arrays can currently be identified by using a UUID, superblock minor number,
-# or a listing of devices.
-#
-#	super-minor is usually the minor number of the metadevice
-#	UUID is the Universally Unique Identifier for the array
-# Each can be obtained using
-#
-# 	mdadm -D <md>
-#
-# To capture the UUIDs for all your RAID arrays to this file, run these:
-#    to get a list of running arrays:
-#    # mdadm -D --scan >>/etc/mdadm.conf
-#    to get a list from superblocks:
-#    # mdadm -E --scan >>/etc/mdadm.conf
-#
-#ARRAY /dev/md0 UUID=3aaa0122:29827cfa:5331ad66:ca767371
-#ARRAY /dev/md1 super-minor=1
-#ARRAY /dev/md2 devices=/dev/hda1,/dev/hdb1
-#
-# ARRAY lines can also specify a "spare-group" for each array.  mdadm --monitor
-# will then move a spare between arrays in a spare-group if one array has a
-# failed drive but no spare
-#ARRAY /dev/md4 uuid=b23f3c6d:aec43a9f:fd65db85:369432df spare-group=group1
-#ARRAY /dev/md5 uuid=19464854:03f71b1b:e0df2edd:246cc977 spare-group=group1
-#
-
-
-# When used in --follow (aka --monitor) mode, mdadm needs a
-# mail address and/or a program.  To start mdadm's monitor mode, add
-# "mdadm" to your DAEMONS array in /etc/rc.conf
-#
-# If the lines are not found, mdadm will exit quietly
-#MAILADDR root at mydomain.tld
-#PROGRAM /usr/sbin/handle-mdadm-events

Copied: mdadm/repos/core-i686/mdadm.conf (from rev 157938, mdadm/repos/testing-i686/mdadm.conf)
===================================================================
--- core-i686/mdadm.conf	                        (rev 0)
+++ core-i686/mdadm.conf	2012-04-30 07:17:52 UTC (rev 157940)
@@ -0,0 +1,67 @@
+# mdadm configuration file
+#
+# mdadm will function properly without the use of a configuration file,
+# but this file is useful for keeping track of arrays and member disks.
+# In general, a mdadm.conf file is created, and updated, after arrays
+# are created. This is the opposite behavior of /etc/raidtab which is
+# created prior to array construction.
+#
+#
+# the config file takes two types of lines:
+#
+#	DEVICE lines specify a list of devices of where to look for
+#	  potential member disks
+#
+#	ARRAY lines specify information about how to identify arrays so
+#	  so that they can be activated
+#
+
+
+# You can have more than one device line and use wild cards. The first 
+# example includes SCSI the first partition of SCSI disks /dev/sdb,
+# /dev/sdc, /dev/sdd, /dev/sdj, /dev/sdk, and /dev/sdl. The second 
+# line looks for array slices on IDE disks.
+#
+#DEVICE /dev/sd[bcdjkl]1
+#DEVICE /dev/hda1 /dev/hdb1
+#
+# The designation "partitions" will scan all partitions found in
+# /proc/partitions
+DEVICE partitions
+
+
+# ARRAY lines specify an array to assemble and a method of identification.
+# Arrays can currently be identified by using a UUID, superblock minor number,
+# or a listing of devices.
+#
+#	super-minor is usually the minor number of the metadevice
+#	UUID is the Universally Unique Identifier for the array
+# Each can be obtained using
+#
+# 	mdadm -D <md>
+#
+# To capture the UUIDs for all your RAID arrays to this file, run these:
+#    to get a list of running arrays:
+#    # mdadm -D --scan >>/etc/mdadm.conf
+#    to get a list from superblocks:
+#    # mdadm -E --scan >>/etc/mdadm.conf
+#
+#ARRAY /dev/md0 UUID=3aaa0122:29827cfa:5331ad66:ca767371
+#ARRAY /dev/md1 super-minor=1
+#ARRAY /dev/md2 devices=/dev/hda1,/dev/hdb1
+#
+# ARRAY lines can also specify a "spare-group" for each array.  mdadm --monitor
+# will then move a spare between arrays in a spare-group if one array has a
+# failed drive but no spare
+#ARRAY /dev/md4 uuid=b23f3c6d:aec43a9f:fd65db85:369432df spare-group=group1
+#ARRAY /dev/md5 uuid=19464854:03f71b1b:e0df2edd:246cc977 spare-group=group1
+#
+
+
+# When used in --follow (aka --monitor) mode, mdadm needs a
+# mail address and/or a program.  To start mdadm's monitor mode, add
+# "mdadm" to your DAEMONS array in /etc/rc.conf
+#
+# If the lines are not found, mdadm will exit quietly
+#MAILADDR root at mydomain.tld
+#PROGRAM /usr/sbin/handle-mdadm-events

Deleted: core-i686/mdadm.install
===================================================================
--- core-i686/mdadm.install	2012-04-30 07:17:50 UTC (rev 157939)
+++ core-i686/mdadm.install	2012-04-30 07:17:52 UTC (rev 157940)
@@ -1,10 +0,0 @@
-# arg 1:  the new package version
-# arg 2:  the old package version
-
-post_upgrade() {
-  if [ "$(vercmp $2 2.6.8-2)" -lt 0 -a "$(grep raid_partitions /etc/mkinitcpio.conf)" ]; then
-    echo "Attention mdadm update:"
-    echo "raid_partitions hook has been replaced by the more powerfull mdadm hook."
-    echo "Please update your /etc/mkinitcpio.conf accordingly."
-  fi
-}

Copied: mdadm/repos/core-i686/mdadm.install (from rev 157938, mdadm/repos/testing-i686/mdadm.install)
===================================================================
--- core-i686/mdadm.install	                        (rev 0)
+++ core-i686/mdadm.install	2012-04-30 07:17:52 UTC (rev 157940)
@@ -0,0 +1,10 @@
+# arg 1:  the new package version
+# arg 2:  the old package version
+
+post_upgrade() {
+  if [ "$(vercmp $2 2.6.8-2)" -lt 0 -a "$(grep raid_partitions /etc/mkinitcpio.conf)" ]; then
+    echo "Attention mdadm update:"
+    echo "raid_partitions hook has been replaced by the more powerfull mdadm hook."
+    echo "Please update your /etc/mkinitcpio.conf accordingly."
+  fi
+}

Deleted: core-i686/mdadm_hook
===================================================================
--- core-i686/mdadm_hook	2012-04-30 07:17:50 UTC (rev 157939)
+++ core-i686/mdadm_hook	2012-04-30 07:17:52 UTC (rev 157940)
@@ -1,44 +0,0 @@
-# vim: set ft=sh:
-run_hook ()
-{
-    input="$(cat /proc/cmdline)"
-    mdconfig="/etc/mdadm.conf"
-    # for partitionable raid, we need to load md_mod first!
-    modprobe md_mod 2>/dev/null
-    # If md is specified on commandline, create config file from those parameters.
-    if [ "$(echo $input | grep "md=")" ]; then
-        #Create initial mdadm.conf
-        # scan all devices in /proc/partitions
-        echo DEVICE partitions > $mdconfig
-        for i in $input; do 
-            case $i in
-                # raid 
-                md=[0-9]*,/*)
-                    device="$(echo "$i" | sed -e 's|,/.*||g' -e 's|=||g')"
-                    array="$(echo $i | cut -d, -f2-)"
-                    echo "ARRAY /dev/$device devices=$array" >> $mdconfig
-                    ;;
-                # partitionable raid
-                md=d[0-9]*,/*)
-                    device="$(echo "$i" | sed -e 's|,/.*||g' -e 's|=|_|g')"
-                    array="$(echo $i | cut -d, -f2-)"
-                    echo "ARRAY /dev/$device devices=$array" >> $mdconfig
-                    ;;
-                # raid UUID 
-                md=[0-9]*,[0-9,a-z]*)
-                    device="$(echo "$i" | sed -e 's|,.*||g' -e 's|=||g')"
-                    array="$(echo $i | cut -d, -f2-)"
-                    echo "ARRAY /dev/$device UUID=$array" >> $mdconfig
-                    ;;
-                # partitionable raid UUID
-                md=d[0-9]*,[0-9,a-z]*)
-                    device="$(echo "$i" | sed -e 's|,.*||g' -e 's|=|_|g')"
-                    array="$(echo $i | cut -d, -f2-)"
-                    echo "ARRAY /dev/$device UUID=$array" >> $mdconfig
-                    ;;
-            esac 
-        done
-    fi
-    # assemble everything
-    [ -e $mdconfig ] && /sbin/mdassemble
-}

Copied: mdadm/repos/core-i686/mdadm_hook (from rev 157938, mdadm/repos/testing-i686/mdadm_hook)
===================================================================
--- core-i686/mdadm_hook	                        (rev 0)
+++ core-i686/mdadm_hook	2012-04-30 07:17:52 UTC (rev 157940)
@@ -0,0 +1,44 @@
+# vim: set ft=sh:
+run_hook ()
+{
+    input="$(cat /proc/cmdline)"
+    mdconfig="/etc/mdadm.conf"
+    # for partitionable raid, we need to load md_mod first!
+    modprobe md_mod 2>/dev/null
+    # If md is specified on commandline, create config file from those parameters.
+    if [ "$(echo $input | grep "md=")" ]; then
+        #Create initial mdadm.conf
+        # scan all devices in /proc/partitions
+        echo DEVICE partitions > $mdconfig
+        for i in $input; do 
+            case $i in
+                # raid 
+                md=[0-9]*,/*)
+                    device="$(echo "$i" | sed -e 's|,/.*||g' -e 's|=||g')"
+                    array="$(echo $i | cut -d, -f2-)"
+                    echo "ARRAY /dev/$device devices=$array" >> $mdconfig
+                    ;;
+                # partitionable raid
+                md=d[0-9]*,/*)
+                    device="$(echo "$i" | sed -e 's|,/.*||g' -e 's|=|_|g')"
+                    array="$(echo $i | cut -d, -f2-)"
+                    echo "ARRAY /dev/$device devices=$array" >> $mdconfig
+                    ;;
+                # raid UUID 
+                md=[0-9]*,[0-9,a-z]*)
+                    device="$(echo "$i" | sed -e 's|,.*||g' -e 's|=||g')"
+                    array="$(echo $i | cut -d, -f2-)"
+                    echo "ARRAY /dev/$device UUID=$array" >> $mdconfig
+                    ;;
+                # partitionable raid UUID
+                md=d[0-9]*,[0-9,a-z]*)
+                    device="$(echo "$i" | sed -e 's|,.*||g' -e 's|=|_|g')"
+                    array="$(echo $i | cut -d, -f2-)"
+                    echo "ARRAY /dev/$device UUID=$array" >> $mdconfig
+                    ;;
+            esac 
+        done
+    fi
+    # assemble everything
+    [ -e $mdconfig ] && /sbin/mdassemble
+}

Deleted: core-i686/mdadm_install
===================================================================
--- core-i686/mdadm_install	2012-04-30 07:17:50 UTC (rev 157939)
+++ core-i686/mdadm_install	2012-04-30 07:17:52 UTC (rev 157940)
@@ -1,45 +0,0 @@
-# vim: set ft=sh:
-
-build()
-{
-    MODULES=" $(checked_modules "drivers/md/*" | grep -v "dm-") "
-    BINARIES=""
-    FILES=""
-    SCRIPT="mdadm"
-    # check if a custom mdadm.conf exists
-    if grep -q ^ARRAY /etc/mdadm.conf; then
-        echo "Custom /etc/mdadm.conf file will be used in initramfs for assembling arrays."
-        add_file "/etc/mdadm.conf"
-    fi
-    add_binary "/sbin/mdassemble"
-}
-
-help ()
-{
-cat<<HELPEOF
-  This hook loads the necessary modules for any raid root device,
-  and assembles the raid device when run.
-
-  If arrays are defined in /etc/mdadm.conf, the file will be used instead
-  of command line assembling.
-  
-  Command Line Setup:
-  - for raid arrays with persistent superblocks:
-    md=<md device no.>,dev0,dev1,...,devn
-    md=<md device no.>,uuid
-  - for partitionable raid arrays with persistent superblocks:
-    md=d<md device no.>,dev0,dev1,...,devn
-    md=d<md device no.>,uuid
-
-  Parameters:
-  - <md device no.> = the number of the md device: 
-    0 means md0, 1 means md1, ...
-  - <dev0-devn>: e.g. /dev/hda1,/dev/hdc1,/dev/sda1,/dev/sdb1
-                   or 0900878d:f95f6057:c39a36e9:55efa60a
-  Examples:
-  - md=d0,/dev/sda3,/dev/sda4 md=d1,/dev/hda1,/dev/hdb1
-    This will setup 2 md partitionable arrays.
-  - md=0,/dev/sda3,/dev/sda4 md=1,/dev/hda1,/dev/hdb1
-    This will setup 2 md arrays with persistent superblocks.
-HELPEOF
-}

Copied: mdadm/repos/core-i686/mdadm_install (from rev 157938, mdadm/repos/testing-i686/mdadm_install)
===================================================================
--- core-i686/mdadm_install	                        (rev 0)
+++ core-i686/mdadm_install	2012-04-30 07:17:52 UTC (rev 157940)
@@ -0,0 +1,45 @@
+# vim: set ft=sh:
+
+build()
+{
+    MODULES=" $(checked_modules "drivers/md/*" | grep -v "dm-") "
+    BINARIES=""
+    FILES=""
+    SCRIPT="mdadm"
+    # check if a custom mdadm.conf exists
+    if grep -q ^ARRAY /etc/mdadm.conf; then
+        echo "Custom /etc/mdadm.conf file will be used in initramfs for assembling arrays."
+        add_file "/etc/mdadm.conf"
+    fi
+    add_binary "/sbin/mdassemble"
+}
+
+help ()
+{
+cat<<HELPEOF
+  This hook loads the necessary modules for any raid root device,
+  and assembles the raid device when run.
+
+  If arrays are defined in /etc/mdadm.conf, the file will be used instead
+  of command line assembling.
+  
+  Command Line Setup:
+  - for raid arrays with persistent superblocks:
+    md=<md device no.>,dev0,dev1,...,devn
+    md=<md device no.>,uuid
+  - for partitionable raid arrays with persistent superblocks:
+    md=d<md device no.>,dev0,dev1,...,devn
+    md=d<md device no.>,uuid
+
+  Parameters:
+  - <md device no.> = the number of the md device: 
+    0 means md0, 1 means md1, ...
+  - <dev0-devn>: e.g. /dev/hda1,/dev/hdc1,/dev/sda1,/dev/sdb1
+                   or 0900878d:f95f6057:c39a36e9:55efa60a
+  Examples:
+  - md=d0,/dev/sda3,/dev/sda4 md=d1,/dev/hda1,/dev/hdb1
+    This will setup 2 md partitionable arrays.
+  - md=0,/dev/sda3,/dev/sda4 md=1,/dev/hda1,/dev/hdb1
+    This will setup 2 md arrays with persistent superblocks.
+HELPEOF
+}

Deleted: core-i686/mdadm_udev_install
===================================================================
--- core-i686/mdadm_udev_install	2012-04-30 07:17:50 UTC (rev 157939)
+++ core-i686/mdadm_udev_install	2012-04-30 07:17:52 UTC (rev 157940)
@@ -1,23 +0,0 @@
-# vim: set ft=sh:
-
-build()
-{
-    MODULES=" $(checked_modules "drivers/md/*" | grep -v "dm-") "
-    BINARIES=""
-    FILES=""
-    SCRIPT=""
-    # check if a custom mdadm.conf exists
-    if grep -q ^ARRAY /etc/mdadm.conf; then
-        echo "Custom /etc/mdadm.conf file will be used in initramfs for assembling arrays."
-        add_file "/etc/mdadm.conf"
-    fi
-    add_binary "/sbin/mdadm"
-    add_file "/lib/udev/rules.d/64-md-raid.rules"
-}
-
-help ()
-{
-cat<<HELPEOF
-  This hook loads raid arrays with udev.
-HELPEOF
-}

Copied: mdadm/repos/core-i686/mdadm_udev_install (from rev 157938, mdadm/repos/testing-i686/mdadm_udev_install)
===================================================================
--- core-i686/mdadm_udev_install	                        (rev 0)
+++ core-i686/mdadm_udev_install	2012-04-30 07:17:52 UTC (rev 157940)
@@ -0,0 +1,23 @@
+# vim: set ft=sh:
+
+build()
+{
+    MODULES=" $(checked_modules "drivers/md/*" | grep -v "dm-") "
+    BINARIES=""
+    FILES=""
+    SCRIPT=""
+    # check if a custom mdadm.conf exists
+    if grep -q ^ARRAY /etc/mdadm.conf; then
+        echo "Custom /etc/mdadm.conf file will be used in initramfs for assembling arrays."
+        add_file "/etc/mdadm.conf"
+    fi
+    add_binary "/sbin/mdadm"
+    add_file "/lib/udev/rules.d/64-md-raid.rules"
+}
+
+help ()
+{
+cat<<HELPEOF
+  This hook loads raid arrays with udev.
+HELPEOF
+}



More information about the arch-commits mailing list