[arch-commits] Commit in lm_sensors/repos (28 files)
Eric Bélanger
eric at archlinux.org
Tue Jul 31 04:47:30 UTC 2012
Date: Tuesday, July 31, 2012 @ 00:47:30
Author: eric
Revision: 164348
archrelease: copy trunk to testing-i686, testing-x86_64
Added:
lm_sensors/repos/testing-i686/
lm_sensors/repos/testing-i686/PKGBUILD
(from rev 164347, lm_sensors/trunk/PKGBUILD)
lm_sensors/repos/testing-i686/daemonarg.patch
(from rev 164347, lm_sensors/trunk/daemonarg.patch)
lm_sensors/repos/testing-i686/fancontrol.rc
(from rev 164347, lm_sensors/trunk/fancontrol.rc)
lm_sensors/repos/testing-i686/fancontrol.service
(from rev 164347, lm_sensors/trunk/fancontrol.service)
lm_sensors/repos/testing-i686/healthd
(from rev 164347, lm_sensors/trunk/healthd)
lm_sensors/repos/testing-i686/healthd.conf
(from rev 164347, lm_sensors/trunk/healthd.conf)
lm_sensors/repos/testing-i686/healthd.rc
(from rev 164347, lm_sensors/trunk/healthd.rc)
lm_sensors/repos/testing-i686/healthd.service
(from rev 164347, lm_sensors/trunk/healthd.service)
lm_sensors/repos/testing-i686/linux_3.0.patch
(from rev 164347, lm_sensors/trunk/linux_3.0.patch)
lm_sensors/repos/testing-i686/sensord.conf
(from rev 164347, lm_sensors/trunk/sensord.conf)
lm_sensors/repos/testing-i686/sensord.rc
(from rev 164347, lm_sensors/trunk/sensord.rc)
lm_sensors/repos/testing-i686/sensord.service
(from rev 164347, lm_sensors/trunk/sensord.service)
lm_sensors/repos/testing-i686/sensors.rc
(from rev 164347, lm_sensors/trunk/sensors.rc)
lm_sensors/repos/testing-x86_64/
lm_sensors/repos/testing-x86_64/PKGBUILD
(from rev 164347, lm_sensors/trunk/PKGBUILD)
lm_sensors/repos/testing-x86_64/daemonarg.patch
(from rev 164347, lm_sensors/trunk/daemonarg.patch)
lm_sensors/repos/testing-x86_64/fancontrol.rc
(from rev 164347, lm_sensors/trunk/fancontrol.rc)
lm_sensors/repos/testing-x86_64/fancontrol.service
(from rev 164347, lm_sensors/trunk/fancontrol.service)
lm_sensors/repos/testing-x86_64/healthd
(from rev 164347, lm_sensors/trunk/healthd)
lm_sensors/repos/testing-x86_64/healthd.conf
(from rev 164347, lm_sensors/trunk/healthd.conf)
lm_sensors/repos/testing-x86_64/healthd.rc
(from rev 164347, lm_sensors/trunk/healthd.rc)
lm_sensors/repos/testing-x86_64/healthd.service
(from rev 164347, lm_sensors/trunk/healthd.service)
lm_sensors/repos/testing-x86_64/linux_3.0.patch
(from rev 164347, lm_sensors/trunk/linux_3.0.patch)
lm_sensors/repos/testing-x86_64/sensord.conf
(from rev 164347, lm_sensors/trunk/sensord.conf)
lm_sensors/repos/testing-x86_64/sensord.rc
(from rev 164347, lm_sensors/trunk/sensord.rc)
lm_sensors/repos/testing-x86_64/sensord.service
(from rev 164347, lm_sensors/trunk/sensord.service)
lm_sensors/repos/testing-x86_64/sensors.rc
(from rev 164347, lm_sensors/trunk/sensors.rc)
-----------------------------------+
testing-i686/PKGBUILD | 61 ++++++++++++++++++
testing-i686/daemonarg.patch | 50 +++++++++++++++
testing-i686/fancontrol.rc | 35 ++++++++++
testing-i686/fancontrol.service | 9 ++
testing-i686/healthd | 53 ++++++++++++++++
testing-i686/healthd.conf | 17 +++++
testing-i686/healthd.rc | 36 ++++++++++
testing-i686/healthd.service | 9 ++
testing-i686/linux_3.0.patch | 11 +++
testing-i686/sensord.conf | 4 +
testing-i686/sensord.rc | 37 +++++++++++
testing-i686/sensord.service | 9 ++
testing-i686/sensors.rc | 119 ++++++++++++++++++++++++++++++++++++
testing-x86_64/PKGBUILD | 61 ++++++++++++++++++
testing-x86_64/daemonarg.patch | 50 +++++++++++++++
testing-x86_64/fancontrol.rc | 35 ++++++++++
testing-x86_64/fancontrol.service | 9 ++
testing-x86_64/healthd | 53 ++++++++++++++++
testing-x86_64/healthd.conf | 17 +++++
testing-x86_64/healthd.rc | 36 ++++++++++
testing-x86_64/healthd.service | 9 ++
testing-x86_64/linux_3.0.patch | 11 +++
testing-x86_64/sensord.conf | 4 +
testing-x86_64/sensord.rc | 37 +++++++++++
testing-x86_64/sensord.service | 9 ++
testing-x86_64/sensors.rc | 119 ++++++++++++++++++++++++++++++++++++
26 files changed, 900 insertions(+)
Copied: lm_sensors/repos/testing-i686/PKGBUILD (from rev 164347, lm_sensors/trunk/PKGBUILD)
===================================================================
--- testing-i686/PKGBUILD (rev 0)
+++ testing-i686/PKGBUILD 2012-07-31 04:47:30 UTC (rev 164348)
@@ -0,0 +1,61 @@
+# $Id$
+# Maintainer: Eric Bélanger <eric at archlinux.org>
+
+pkgname=lm_sensors
+pkgver=3.3.2
+pkgrel=4
+pkgdesc="Collection of user space tools for general SMBus access and hardware monitoring"
+arch=('i686' 'x86_64')
+url="http://www.lm-sensors.org/"
+license=('GPL' 'LGPL')
+depends=('perl' 'sysfsutils')
+makedepends=('rrdtool')
+optdepends=('rrdtool: for logging with sensord')
+backup=('etc/sensors3.conf' 'etc/healthd.conf' 'etc/conf.d/sensord')
+options=('!emptydirs')
+source=(http://dl.lm-sensors.org/lm-sensors/releases/lm_sensors-${pkgver}.tar.bz2{,.sig} \
+ sensors.rc fancontrol.rc healthd healthd.conf healthd.rc sensord.conf \
+ sensord.rc fancontrol.service sensord.service healthd.service \
+ daemonarg.patch linux_3.0.patch)
+sha1sums=('5d0f026ad763124e8c2ad733b6e1ad5e6473993d'
+ 'a486d9fb6c5b0aff4520f6312106c67f5163f1cf'
+ 'b2e664b9b87759991f02d0a1e8cac5e95098c0a5'
+ 'a068ac0a3115a6191a487e11422506baa922b40a'
+ 'afaad558d2ad4732aa53b69afa23ccf37bc67ab1'
+ '6c4e8a2d89dd2fd3ca2f0f4f3b1230111e01b0fc'
+ 'de5a46afc39a77ae8721246a0223baf21a2d4c9c'
+ 'de8d4d65406815c389f8a04e2a8508a1ae6749c8'
+ '72a60251d1d55a67307dab4105d9f3f01a080af4'
+ '7a4a4d1442aeeba0ba8aefb742a3ef187b593f4c'
+ 'eff43b4882d25dae7dd0b33eb2e33b0836a5cc51'
+ '9cc453eb0e9f9057227459cb07e74815383544bf'
+ '34241388c4001bfb6e49b7e10da1217e29a258d6'
+ '5662828085cdd981f0dc7cf8f79d3d6e2b72f50c')
+
+build() {
+ cd "${srcdir}/${pkgname}-${pkgver}"
+ sed -i -e 's|/etc/sysconfig|/etc/conf.d|' \
+ -e 's|/etc/init.d/lm_sensors|/etc/rc.d/sensors|' prog/{detect/sensors-detect,init/lm_sensors.service}
+ sed -i 's@\(/bin/systemctl\|/lib/systemd/system\)@/usr\1 at g' prog/detect/sensors-detect
+ sed -i 's/EnvironmentFile=/EnvironmentFile=-/' prog/init/lm_sensors.service
+ patch -p1 < ../daemonarg.patch
+ patch -p0 < ../linux_3.0.patch
+ make PREFIX=/usr
+}
+
+package() {
+ cd "${srcdir}/${pkgname}-${pkgver}"
+ make PROG_EXTRA=sensord BUILD_STATIC_LIB=0 \
+ PREFIX=/usr MANDIR=/usr/share/man DESTDIR="${pkgdir}" install
+ install -D -m644 prog/init/lm_sensors.service "${pkgdir}/usr/lib/systemd/system/lm_sensors.service"
+ install -D -m755 "${srcdir}/sensors.rc" "${pkgdir}/etc/rc.d/sensors"
+ install -D -m755 "${srcdir}/fancontrol.rc" "${pkgdir}/etc/rc.d/fancontrol"
+ install -D -m755 "${srcdir}/healthd" "${pkgdir}/usr/sbin/healthd"
+ install -D -m755 "${srcdir}/healthd.rc" "${pkgdir}/etc/rc.d/healthd"
+ install -D -m644 "${srcdir}/healthd.conf" "${pkgdir}/etc/healthd.conf"
+ install -D -m755 "${srcdir}/sensord.rc" "${pkgdir}/etc/rc.d/sensord"
+ install -D -m644 "${srcdir}/sensord.conf" "${pkgdir}/etc/conf.d/sensord"
+ install -D -m644 "${srcdir}/fancontrol.service" "${pkgdir}/usr/lib/systemd/system/fancontrol.service"
+ install -D -m644 "${srcdir}/sensord.service" "${pkgdir}/usr/lib/systemd/system/sensord.service"
+ install -D -m644 "${srcdir}/healthd.service" "${pkgdir}/usr/lib/systemd/system/healthd.service"
+}
Copied: lm_sensors/repos/testing-i686/daemonarg.patch (from rev 164347, lm_sensors/trunk/daemonarg.patch)
===================================================================
--- testing-i686/daemonarg.patch (rev 0)
+++ testing-i686/daemonarg.patch 2012-07-31 04:47:30 UTC (rev 164348)
@@ -0,0 +1,50 @@
+diff -ru lm_sensors-3.1.2-1/prog/pwm/fancontrol lm_sensors-3.1.2-1_pyropeter/usr/sbin/fancontrol
+--- lm_sensors-3.1.2-1/prog/pwm/fancontrol 2010-02-03 03:45:15.000000000 +0100
++++ lm_sensors-3.1.2-1_pyropeter/prog/pwm/fancontrol 2010-03-07 01:37:09.000000000 +0100
+@@ -5,7 +5,9 @@
+ #
+ # Version 0.70
+ #
+-# Usage: fancontrol [CONFIGFILE]
++# Usage: fancontrol [-D] [CONFIGFILE]
++#
++# (-D causes fancontrol to 'fork' to the background after some tests)
+ #
+ # Dependencies:
+ # bash, egrep, sed, cut, sleep, readlink, lm_sensors :)
+@@ -43,6 +45,12 @@
+ #DEBUG=1
+ MAX=255
+
++DAEMON=0
++if [ "$1" = "-D" ]; then
++ DAEMON=1
++ shift
++fi
++
+ declare -i pwmval
+
+ function LoadConfig {
+@@ -303,7 +311,6 @@
+ echo "File $PIDFILE exists, is fancontrol already running?"
+ exit 1
+ fi
+-echo $$ > "$PIDFILE"
+
+ # $1 = pwm file name
+ function pwmdisable()
+@@ -475,6 +482,14 @@
+ let fcvcount=$fcvcount+1
+ done
+
++if [ "$DAEMON" -gt 0 ]; then
++ echo "Forking..."
++ $0 $* &> /dev/null &
++ exit 0
++fi
++
++echo $$ > "$PIDFILE"
++
+ echo 'Starting automatic fan control...'
+
+ # main loop calling the main function at specified intervals
Copied: lm_sensors/repos/testing-i686/fancontrol.rc (from rev 164347, lm_sensors/trunk/fancontrol.rc)
===================================================================
--- testing-i686/fancontrol.rc (rev 0)
+++ testing-i686/fancontrol.rc 2012-07-31 04:47:30 UTC (rev 164348)
@@ -0,0 +1,35 @@
+#!/bin/bash
+
+. /etc/rc.conf
+. /etc/rc.d/functions
+
+PID=$(pidof -o %PPID -x /usr/sbin/fancontrol)
+case "$1" in
+ start)
+ stat_busy "Starting fancontrol"
+ [ -z "$PID" ] && /usr/sbin/fancontrol -D &>/dev/null
+ if [ $? -gt 0 -o -n "$PID" ]; then
+ stat_fail
+ else
+ add_daemon fancontrol
+ stat_done
+ fi
+ ;;
+ stop)
+ stat_busy "Stopping fancontrol"
+ [ ! -z "$PID" ] && kill $PID &> /dev/null
+ if [ $? -gt 0 ]; then
+ stat_fail
+ else
+ rm_daemon fancontrol
+ stat_done
+ fi
+ ;;
+ restart)
+ $0 stop
+ $0 start
+ ;;
+ *)
+ echo "usage: $0 {start|stop|restart}"
+esac
+exit 0
Copied: lm_sensors/repos/testing-i686/fancontrol.service (from rev 164347, lm_sensors/trunk/fancontrol.service)
===================================================================
--- testing-i686/fancontrol.service (rev 0)
+++ testing-i686/fancontrol.service 2012-07-31 04:47:30 UTC (rev 164348)
@@ -0,0 +1,9 @@
+[Unit]
+Description=Fan control daemon
+
+[Service]
+PIDFile=/var/run/fancontrol.pid
+ExecStart=/usr/sbin/fancontrol
+
+[Install]
+WantedBy=multi-user.target
Copied: lm_sensors/repos/testing-i686/healthd (from rev 164347, lm_sensors/trunk/healthd)
===================================================================
--- testing-i686/healthd (rev 0)
+++ testing-i686/healthd 2012-07-31 04:47:30 UTC (rev 164348)
@@ -0,0 +1,53 @@
+#!/bin/bash
+
+#
+# /usr/sbin/healthd
+#
+
+. /etc/healthd.conf
+
+cmd="${ALARM_CMD}"
+addr="${ADMIN_EMAIL}"
+slp="${ALARM_SLEEP}"
+sensors="/usr/bin/sensors"
+
+
+while [ $# -gt 0 ] ; do
+ case "${1}" in
+ -c ) cmd="${2}" ; shift 2 ;;
+ -m ) addr="${2}" ; shift 2 ;;
+ -s ) slp="${2}" ; shift 2 ;;
+ * ) shift 1 ;;
+ esac
+done
+
+case "${ALARM_RESET}" in
+ yes) /usr/bin/sensors > /dev/null
+ ;;
+ no) true
+ ;;
+esac
+
+[ -n "${cmd}" ] && [ -n "$( which -- "${cmd%% *}" )" ] || \
+ [ -n "${addr}" ] || exit 1
+
+[ "${slp}" -ge 2 ] || slp=600
+
+while true ; do
+ sleep 15
+ message="$( $sensors )"
+ case "$message" in
+ '' ) message='Could not get any sensor values !' ;;
+ *ALARM* ) : ;;
+ * ) message='' ;;
+ esac
+ if [ -n "$message" ]; then
+ if [ -n "${addr}" ]; then
+ echo "$message" | mail -s \
+ "Sensors ALARM detected at host: $( hostname )" \
+ "${addr}"
+ fi
+ [ -z "${cmd}" ] || ${cmd} &
+ sleep ${slp}
+ fi
+done &
Copied: lm_sensors/repos/testing-i686/healthd.conf (from rev 164347, lm_sensors/trunk/healthd.conf)
===================================================================
--- testing-i686/healthd.conf (rev 0)
+++ testing-i686/healthd.conf 2012-07-31 04:47:30 UTC (rev 164348)
@@ -0,0 +1,17 @@
+#
+# /etc/conf.d/healthd
+#
+
+# reset any pending alarms on startup
+ALARM_RESET="yes"
+
+# where to sent mails on alarm
+ADMIN_EMAIL="root"
+
+# Seconds to sleep when alarm detected before checking again
+# If you want to fill up your mail inbox set this to 2. ;-)
+ALARM_SLEEP=600
+
+# command to run in background on each alarm
+# N.B.: If you choose to use the beep command, you'll need to install it: pacman -S beep
+ALARM_CMD="beep -f 800 -l 500 -d 500 -r 600"
Copied: lm_sensors/repos/testing-i686/healthd.rc (from rev 164347, lm_sensors/trunk/healthd.rc)
===================================================================
--- testing-i686/healthd.rc (rev 0)
+++ testing-i686/healthd.rc 2012-07-31 04:47:30 UTC (rev 164348)
@@ -0,0 +1,36 @@
+#!/bin/bash
+
+. /etc/rc.conf
+. /etc/rc.d/functions
+
+PID=$(pidof -x -o %PPID /usr/sbin/healthd)
+case "${1}" in
+ start)
+ stat_busy "Starting Health Daemon"
+ [ -z "${PID}" ] && /usr/sbin/healthd &> /dev/null
+ if [ $? -gt 0 ]; then
+ stat_fail
+ else
+ echo "${PID}" > /var/run/healthd.pid
+ add_daemon healthd
+ stat_done
+ fi
+ ;;
+ stop)
+ stat_busy "Stopping Health Daemon"
+ [ ! -z "${PID}" ] && kill ${PID} &> /dev/null
+ if [ $? -gt 0 ]; then
+ stat_fail
+ else
+ rm_daemon healthd
+ stat_done
+ fi
+ ;;
+ restart)
+ $0 stop
+ sleep 2
+ $0 start
+ ;;
+ *) echo "usage: $0 {start|stop|restart}"
+esac
+exit 0
Copied: lm_sensors/repos/testing-i686/healthd.service (from rev 164347, lm_sensors/trunk/healthd.service)
===================================================================
--- testing-i686/healthd.service (rev 0)
+++ testing-i686/healthd.service 2012-07-31 04:47:30 UTC (rev 164348)
@@ -0,0 +1,9 @@
+[Unit]
+Description=A daemon which can be used to alert you in the event of a hardware health monitoring alarm
+
+[Service]
+PIDFile=/var/run/healthd.pid
+ExecStart=/usr/sbin/healthd
+
+[Install]
+WantedBy=multi-user.target
Copied: lm_sensors/repos/testing-i686/linux_3.0.patch (from rev 164347, lm_sensors/trunk/linux_3.0.patch)
===================================================================
--- testing-i686/linux_3.0.patch (rev 0)
+++ testing-i686/linux_3.0.patch 2012-07-31 04:47:30 UTC (rev 164348)
@@ -0,0 +1,11 @@
+--- prog/detect/sensors-detect 2011-08-02 10:23:46.000000000 +0200
++++ prog/detect/sensors-detect 2011-08-02 10:24:04.000000000 +0200
+@@ -2472,7 +2472,7 @@
+
+ sub initialize_kernel_version
+ {
+- `uname -r` =~ /(\d+)\.(\d+)\.(\d+)(.*)/;
++ `uname -r` =~ /(\d+)\.(\d+)(.*)/;
+ @kernel_version = ($1, $2, $3, $4);
+ chomp($kernel_arch = `uname -m`);
+
Copied: lm_sensors/repos/testing-i686/sensord.conf (from rev 164347, lm_sensors/trunk/sensord.conf)
===================================================================
--- testing-i686/sensord.conf (rev 0)
+++ testing-i686/sensord.conf 2012-07-31 04:47:30 UTC (rev 164348)
@@ -0,0 +1,4 @@
+#
+# Parameters to be passed to sensord
+#
+SENSORD_ARGS=""
Copied: lm_sensors/repos/testing-i686/sensord.rc (from rev 164347, lm_sensors/trunk/sensord.rc)
===================================================================
--- testing-i686/sensord.rc (rev 0)
+++ testing-i686/sensord.rc 2012-07-31 04:47:30 UTC (rev 164348)
@@ -0,0 +1,37 @@
+#!/bin/bash
+
+. /etc/rc.conf
+. /etc/rc.d/functions
+. /etc/conf.d/sensord
+
+PID=$(pidof -o %PPID /usr/sbin/sensord)
+case "$1" in
+ start)
+ stat_busy "Starting sensord"
+ [ -z "$PID" ] && /usr/sbin/sensord ${SENSORD_ARGS}
+ if [ $? -gt 0 ]; then
+ stat_fail
+ else
+ add_daemon sensord
+ stat_done
+ fi
+ ;;
+ stop)
+ stat_busy "Stopping sensord"
+ [ ! -z "$PID" ] && kill $PID &> /dev/null
+ if [ $? -gt 0 ]; then
+ stat_fail
+ else
+ rm_daemon sensord
+ stat_done
+ fi
+ ;;
+ restart)
+ $0 stop
+ sleep 1
+ $0 start
+ ;;
+ *)
+ echo "usage: $0 {start|stop|restart}"
+esac
+exit 0
Copied: lm_sensors/repos/testing-i686/sensord.service (from rev 164347, lm_sensors/trunk/sensord.service)
===================================================================
--- testing-i686/sensord.service (rev 0)
+++ testing-i686/sensord.service 2012-07-31 04:47:30 UTC (rev 164348)
@@ -0,0 +1,9 @@
+[Unit]
+Description=Sensor information logging daemon
+
+[Service]
+PIDFile=/var/run/sensord.pid
+ExecStart=/usr/sbin/sensord
+
+[Install]
+WantedBy=multi-user.target
Copied: lm_sensors/repos/testing-i686/sensors.rc (from rev 164347, lm_sensors/trunk/sensors.rc)
===================================================================
--- testing-i686/sensors.rc (rev 0)
+++ testing-i686/sensors.rc 2012-07-31 04:47:30 UTC (rev 164348)
@@ -0,0 +1,119 @@
+#!/bin/bash
+
+# description: sensors is used for monitoring motherboard sensor values.
+# config: /etc/conf.d/lm_sensors
+
+# See also the lm_sensors homepage at:
+# http://www2.lm-sensors.nu/~lm78/index.html
+
+# It uses a config file /etc/conf.d/lm_sensors that contains the modules to
+# be loaded/unloaded. That file is sourced into this one.
+
+# The format of that file a shell script that simply defines the modules
+# in order as normal shell variables with the special names:
+# MODULE_1, MODULE_2, MODULE_3, etc.
+
+. /etc/rc.conf
+. /etc/rc.d/functions
+
+PSENSORS=/usr/bin/sensors
+
+if $(grep -q sysfs /proc/mounts); then
+ WITHSYS=1
+else
+ WITHSYS=0
+fi
+
+if [ $WITHSYS == "0" ]; then
+ # If sensors isn't supported by the kernel, try loading the module...
+ [ -e /proc/sys/dev/sensors ] || /sbin/modprobe i2c-proc &>/dev/null
+
+ # Don't bother if /proc/sensors still doesn't exist, kernel doesn't have support for sensors.
+ if ! [ -e /proc/sys/dev/sensors ]; then
+ echo "lm_sensors: kernel does not have sensors support"
+ stat_fail
+ fi
+
+ # If sensors was not already running, unload the module...
+ [ -e /var/run/daemons/sensors ] || /sbin/modprobe -r i2c-proc &>/dev/null
+fi
+
+if [ -e /etc/conf.d/lm_sensors ]; then
+ CONFIG=/etc/conf.d/lm_sensors
+elif [ -e /etc/sysconfig/lm_sensors ]; then
+ # Moving config to new Arch-specific location
+ mv /etc/sysconfig/lm_sensors /etc/conf.d/lm_sensors
+ CONFIG=/etc/conf.d/lm_sensors
+fi
+
+case "$1" in
+ start)
+ stat_busy "Starting Up Sensors"
+
+ if [ -r "$CONFIG" ]; then
+ . "$CONFIG"
+ modules=$(grep \^MODULE_ $CONFIG | wc -l | tr -d ' ')
+ i=0
+ while [ $i -lt $modules ] ; do
+ module=$(eval echo '$'MODULE_$i)
+ # echo starting module __${module}__ #debug
+ /sbin/modprobe $module &>/dev/null
+ i=$(expr $i + 1)
+ done
+ fi
+
+ $PSENSORS -s
+
+ if [ $? -gt 0 ]; then
+ stat_fail
+ else
+ add_daemon sensors
+ stat_done
+ fi
+ ;;
+
+ stop)
+ stat_busy "Shutting Down Sensors"
+
+ if [ -r "$CONFIG" ]; then
+ . "$CONFIG"
+ modules=$(grep \^MODULE_ $CONFIG | wc -l | tr -d ' ')
+ i=$(expr $modules - 1)
+ while [ $i -ge 0 ] ; do
+ module=$(eval echo '$'MODULE_$i)
+ # echo stoping module __${module}__ #debug
+ /sbin/modprobe -r $module &>/dev/null
+ i=$(expr $i - 1)
+ done
+ fi
+
+ if [ $WITHSYS == "0" ]; then
+ /sbin/modprobe -r i2c-proc &>/dev/null
+ fi
+
+ if [ $? -gt 0 ]; then
+ stat_fail
+ else
+ rm_daemon sensors
+ stat_done
+ fi
+ ;;
+
+ status)
+ $PSENSORS
+ ;;
+
+ restart)
+ $0 stop
+ sleep 1
+ $0 start
+ ;;
+
+ condrestart)
+ [ -e /var/run/daemons/sensors ] && $0 restart || :
+ ;;
+
+ *)
+ echo "Usage: $0 {start|stop|restart|status|condrestart}"
+esac
+exit 0
Copied: lm_sensors/repos/testing-x86_64/PKGBUILD (from rev 164347, lm_sensors/trunk/PKGBUILD)
===================================================================
--- testing-x86_64/PKGBUILD (rev 0)
+++ testing-x86_64/PKGBUILD 2012-07-31 04:47:30 UTC (rev 164348)
@@ -0,0 +1,61 @@
+# $Id$
+# Maintainer: Eric Bélanger <eric at archlinux.org>
+
+pkgname=lm_sensors
+pkgver=3.3.2
+pkgrel=4
+pkgdesc="Collection of user space tools for general SMBus access and hardware monitoring"
+arch=('i686' 'x86_64')
+url="http://www.lm-sensors.org/"
+license=('GPL' 'LGPL')
+depends=('perl' 'sysfsutils')
+makedepends=('rrdtool')
+optdepends=('rrdtool: for logging with sensord')
+backup=('etc/sensors3.conf' 'etc/healthd.conf' 'etc/conf.d/sensord')
+options=('!emptydirs')
+source=(http://dl.lm-sensors.org/lm-sensors/releases/lm_sensors-${pkgver}.tar.bz2{,.sig} \
+ sensors.rc fancontrol.rc healthd healthd.conf healthd.rc sensord.conf \
+ sensord.rc fancontrol.service sensord.service healthd.service \
+ daemonarg.patch linux_3.0.patch)
+sha1sums=('5d0f026ad763124e8c2ad733b6e1ad5e6473993d'
+ 'a486d9fb6c5b0aff4520f6312106c67f5163f1cf'
+ 'b2e664b9b87759991f02d0a1e8cac5e95098c0a5'
+ 'a068ac0a3115a6191a487e11422506baa922b40a'
+ 'afaad558d2ad4732aa53b69afa23ccf37bc67ab1'
+ '6c4e8a2d89dd2fd3ca2f0f4f3b1230111e01b0fc'
+ 'de5a46afc39a77ae8721246a0223baf21a2d4c9c'
+ 'de8d4d65406815c389f8a04e2a8508a1ae6749c8'
+ '72a60251d1d55a67307dab4105d9f3f01a080af4'
+ '7a4a4d1442aeeba0ba8aefb742a3ef187b593f4c'
+ 'eff43b4882d25dae7dd0b33eb2e33b0836a5cc51'
+ '9cc453eb0e9f9057227459cb07e74815383544bf'
+ '34241388c4001bfb6e49b7e10da1217e29a258d6'
+ '5662828085cdd981f0dc7cf8f79d3d6e2b72f50c')
+
+build() {
+ cd "${srcdir}/${pkgname}-${pkgver}"
+ sed -i -e 's|/etc/sysconfig|/etc/conf.d|' \
+ -e 's|/etc/init.d/lm_sensors|/etc/rc.d/sensors|' prog/{detect/sensors-detect,init/lm_sensors.service}
+ sed -i 's@\(/bin/systemctl\|/lib/systemd/system\)@/usr\1 at g' prog/detect/sensors-detect
+ sed -i 's/EnvironmentFile=/EnvironmentFile=-/' prog/init/lm_sensors.service
+ patch -p1 < ../daemonarg.patch
+ patch -p0 < ../linux_3.0.patch
+ make PREFIX=/usr
+}
+
+package() {
+ cd "${srcdir}/${pkgname}-${pkgver}"
+ make PROG_EXTRA=sensord BUILD_STATIC_LIB=0 \
+ PREFIX=/usr MANDIR=/usr/share/man DESTDIR="${pkgdir}" install
+ install -D -m644 prog/init/lm_sensors.service "${pkgdir}/usr/lib/systemd/system/lm_sensors.service"
+ install -D -m755 "${srcdir}/sensors.rc" "${pkgdir}/etc/rc.d/sensors"
+ install -D -m755 "${srcdir}/fancontrol.rc" "${pkgdir}/etc/rc.d/fancontrol"
+ install -D -m755 "${srcdir}/healthd" "${pkgdir}/usr/sbin/healthd"
+ install -D -m755 "${srcdir}/healthd.rc" "${pkgdir}/etc/rc.d/healthd"
+ install -D -m644 "${srcdir}/healthd.conf" "${pkgdir}/etc/healthd.conf"
+ install -D -m755 "${srcdir}/sensord.rc" "${pkgdir}/etc/rc.d/sensord"
+ install -D -m644 "${srcdir}/sensord.conf" "${pkgdir}/etc/conf.d/sensord"
+ install -D -m644 "${srcdir}/fancontrol.service" "${pkgdir}/usr/lib/systemd/system/fancontrol.service"
+ install -D -m644 "${srcdir}/sensord.service" "${pkgdir}/usr/lib/systemd/system/sensord.service"
+ install -D -m644 "${srcdir}/healthd.service" "${pkgdir}/usr/lib/systemd/system/healthd.service"
+}
Copied: lm_sensors/repos/testing-x86_64/daemonarg.patch (from rev 164347, lm_sensors/trunk/daemonarg.patch)
===================================================================
--- testing-x86_64/daemonarg.patch (rev 0)
+++ testing-x86_64/daemonarg.patch 2012-07-31 04:47:30 UTC (rev 164348)
@@ -0,0 +1,50 @@
+diff -ru lm_sensors-3.1.2-1/prog/pwm/fancontrol lm_sensors-3.1.2-1_pyropeter/usr/sbin/fancontrol
+--- lm_sensors-3.1.2-1/prog/pwm/fancontrol 2010-02-03 03:45:15.000000000 +0100
++++ lm_sensors-3.1.2-1_pyropeter/prog/pwm/fancontrol 2010-03-07 01:37:09.000000000 +0100
+@@ -5,7 +5,9 @@
+ #
+ # Version 0.70
+ #
+-# Usage: fancontrol [CONFIGFILE]
++# Usage: fancontrol [-D] [CONFIGFILE]
++#
++# (-D causes fancontrol to 'fork' to the background after some tests)
+ #
+ # Dependencies:
+ # bash, egrep, sed, cut, sleep, readlink, lm_sensors :)
+@@ -43,6 +45,12 @@
+ #DEBUG=1
+ MAX=255
+
++DAEMON=0
++if [ "$1" = "-D" ]; then
++ DAEMON=1
++ shift
++fi
++
+ declare -i pwmval
+
+ function LoadConfig {
+@@ -303,7 +311,6 @@
+ echo "File $PIDFILE exists, is fancontrol already running?"
+ exit 1
+ fi
+-echo $$ > "$PIDFILE"
+
+ # $1 = pwm file name
+ function pwmdisable()
+@@ -475,6 +482,14 @@
+ let fcvcount=$fcvcount+1
+ done
+
++if [ "$DAEMON" -gt 0 ]; then
++ echo "Forking..."
++ $0 $* &> /dev/null &
++ exit 0
++fi
++
++echo $$ > "$PIDFILE"
++
+ echo 'Starting automatic fan control...'
+
+ # main loop calling the main function at specified intervals
Copied: lm_sensors/repos/testing-x86_64/fancontrol.rc (from rev 164347, lm_sensors/trunk/fancontrol.rc)
===================================================================
--- testing-x86_64/fancontrol.rc (rev 0)
+++ testing-x86_64/fancontrol.rc 2012-07-31 04:47:30 UTC (rev 164348)
@@ -0,0 +1,35 @@
+#!/bin/bash
+
+. /etc/rc.conf
+. /etc/rc.d/functions
+
+PID=$(pidof -o %PPID -x /usr/sbin/fancontrol)
+case "$1" in
+ start)
+ stat_busy "Starting fancontrol"
+ [ -z "$PID" ] && /usr/sbin/fancontrol -D &>/dev/null
+ if [ $? -gt 0 -o -n "$PID" ]; then
+ stat_fail
+ else
+ add_daemon fancontrol
+ stat_done
+ fi
+ ;;
+ stop)
+ stat_busy "Stopping fancontrol"
+ [ ! -z "$PID" ] && kill $PID &> /dev/null
+ if [ $? -gt 0 ]; then
+ stat_fail
+ else
+ rm_daemon fancontrol
+ stat_done
+ fi
+ ;;
+ restart)
+ $0 stop
+ $0 start
+ ;;
+ *)
+ echo "usage: $0 {start|stop|restart}"
+esac
+exit 0
Copied: lm_sensors/repos/testing-x86_64/fancontrol.service (from rev 164347, lm_sensors/trunk/fancontrol.service)
===================================================================
--- testing-x86_64/fancontrol.service (rev 0)
+++ testing-x86_64/fancontrol.service 2012-07-31 04:47:30 UTC (rev 164348)
@@ -0,0 +1,9 @@
+[Unit]
+Description=Fan control daemon
+
+[Service]
+PIDFile=/var/run/fancontrol.pid
+ExecStart=/usr/sbin/fancontrol
+
+[Install]
+WantedBy=multi-user.target
Copied: lm_sensors/repos/testing-x86_64/healthd (from rev 164347, lm_sensors/trunk/healthd)
===================================================================
--- testing-x86_64/healthd (rev 0)
+++ testing-x86_64/healthd 2012-07-31 04:47:30 UTC (rev 164348)
@@ -0,0 +1,53 @@
+#!/bin/bash
+
+#
+# /usr/sbin/healthd
+#
+
+. /etc/healthd.conf
+
+cmd="${ALARM_CMD}"
+addr="${ADMIN_EMAIL}"
+slp="${ALARM_SLEEP}"
+sensors="/usr/bin/sensors"
+
+
+while [ $# -gt 0 ] ; do
+ case "${1}" in
+ -c ) cmd="${2}" ; shift 2 ;;
+ -m ) addr="${2}" ; shift 2 ;;
+ -s ) slp="${2}" ; shift 2 ;;
+ * ) shift 1 ;;
+ esac
+done
+
+case "${ALARM_RESET}" in
+ yes) /usr/bin/sensors > /dev/null
+ ;;
+ no) true
+ ;;
+esac
+
+[ -n "${cmd}" ] && [ -n "$( which -- "${cmd%% *}" )" ] || \
+ [ -n "${addr}" ] || exit 1
+
+[ "${slp}" -ge 2 ] || slp=600
+
+while true ; do
+ sleep 15
+ message="$( $sensors )"
+ case "$message" in
+ '' ) message='Could not get any sensor values !' ;;
+ *ALARM* ) : ;;
+ * ) message='' ;;
+ esac
+ if [ -n "$message" ]; then
+ if [ -n "${addr}" ]; then
+ echo "$message" | mail -s \
+ "Sensors ALARM detected at host: $( hostname )" \
+ "${addr}"
+ fi
+ [ -z "${cmd}" ] || ${cmd} &
+ sleep ${slp}
+ fi
+done &
Copied: lm_sensors/repos/testing-x86_64/healthd.conf (from rev 164347, lm_sensors/trunk/healthd.conf)
===================================================================
--- testing-x86_64/healthd.conf (rev 0)
+++ testing-x86_64/healthd.conf 2012-07-31 04:47:30 UTC (rev 164348)
@@ -0,0 +1,17 @@
+#
+# /etc/conf.d/healthd
+#
+
+# reset any pending alarms on startup
+ALARM_RESET="yes"
+
+# where to sent mails on alarm
+ADMIN_EMAIL="root"
+
+# Seconds to sleep when alarm detected before checking again
+# If you want to fill up your mail inbox set this to 2. ;-)
+ALARM_SLEEP=600
+
+# command to run in background on each alarm
+# N.B.: If you choose to use the beep command, you'll need to install it: pacman -S beep
+ALARM_CMD="beep -f 800 -l 500 -d 500 -r 600"
Copied: lm_sensors/repos/testing-x86_64/healthd.rc (from rev 164347, lm_sensors/trunk/healthd.rc)
===================================================================
--- testing-x86_64/healthd.rc (rev 0)
+++ testing-x86_64/healthd.rc 2012-07-31 04:47:30 UTC (rev 164348)
@@ -0,0 +1,36 @@
+#!/bin/bash
+
+. /etc/rc.conf
+. /etc/rc.d/functions
+
+PID=$(pidof -x -o %PPID /usr/sbin/healthd)
+case "${1}" in
+ start)
+ stat_busy "Starting Health Daemon"
+ [ -z "${PID}" ] && /usr/sbin/healthd &> /dev/null
+ if [ $? -gt 0 ]; then
+ stat_fail
+ else
+ echo "${PID}" > /var/run/healthd.pid
+ add_daemon healthd
+ stat_done
+ fi
+ ;;
+ stop)
+ stat_busy "Stopping Health Daemon"
+ [ ! -z "${PID}" ] && kill ${PID} &> /dev/null
+ if [ $? -gt 0 ]; then
+ stat_fail
+ else
+ rm_daemon healthd
+ stat_done
+ fi
+ ;;
+ restart)
+ $0 stop
+ sleep 2
+ $0 start
+ ;;
+ *) echo "usage: $0 {start|stop|restart}"
+esac
+exit 0
Copied: lm_sensors/repos/testing-x86_64/healthd.service (from rev 164347, lm_sensors/trunk/healthd.service)
===================================================================
--- testing-x86_64/healthd.service (rev 0)
+++ testing-x86_64/healthd.service 2012-07-31 04:47:30 UTC (rev 164348)
@@ -0,0 +1,9 @@
+[Unit]
+Description=A daemon which can be used to alert you in the event of a hardware health monitoring alarm
+
+[Service]
+PIDFile=/var/run/healthd.pid
+ExecStart=/usr/sbin/healthd
+
+[Install]
+WantedBy=multi-user.target
Copied: lm_sensors/repos/testing-x86_64/linux_3.0.patch (from rev 164347, lm_sensors/trunk/linux_3.0.patch)
===================================================================
--- testing-x86_64/linux_3.0.patch (rev 0)
+++ testing-x86_64/linux_3.0.patch 2012-07-31 04:47:30 UTC (rev 164348)
@@ -0,0 +1,11 @@
+--- prog/detect/sensors-detect 2011-08-02 10:23:46.000000000 +0200
++++ prog/detect/sensors-detect 2011-08-02 10:24:04.000000000 +0200
+@@ -2472,7 +2472,7 @@
+
+ sub initialize_kernel_version
+ {
+- `uname -r` =~ /(\d+)\.(\d+)\.(\d+)(.*)/;
++ `uname -r` =~ /(\d+)\.(\d+)(.*)/;
+ @kernel_version = ($1, $2, $3, $4);
+ chomp($kernel_arch = `uname -m`);
+
Copied: lm_sensors/repos/testing-x86_64/sensord.conf (from rev 164347, lm_sensors/trunk/sensord.conf)
===================================================================
--- testing-x86_64/sensord.conf (rev 0)
+++ testing-x86_64/sensord.conf 2012-07-31 04:47:30 UTC (rev 164348)
@@ -0,0 +1,4 @@
+#
+# Parameters to be passed to sensord
+#
+SENSORD_ARGS=""
Copied: lm_sensors/repos/testing-x86_64/sensord.rc (from rev 164347, lm_sensors/trunk/sensord.rc)
===================================================================
--- testing-x86_64/sensord.rc (rev 0)
+++ testing-x86_64/sensord.rc 2012-07-31 04:47:30 UTC (rev 164348)
@@ -0,0 +1,37 @@
+#!/bin/bash
+
+. /etc/rc.conf
+. /etc/rc.d/functions
+. /etc/conf.d/sensord
+
+PID=$(pidof -o %PPID /usr/sbin/sensord)
+case "$1" in
+ start)
+ stat_busy "Starting sensord"
+ [ -z "$PID" ] && /usr/sbin/sensord ${SENSORD_ARGS}
+ if [ $? -gt 0 ]; then
+ stat_fail
+ else
+ add_daemon sensord
+ stat_done
+ fi
+ ;;
+ stop)
+ stat_busy "Stopping sensord"
+ [ ! -z "$PID" ] && kill $PID &> /dev/null
+ if [ $? -gt 0 ]; then
+ stat_fail
+ else
+ rm_daemon sensord
+ stat_done
+ fi
+ ;;
+ restart)
+ $0 stop
+ sleep 1
+ $0 start
+ ;;
+ *)
+ echo "usage: $0 {start|stop|restart}"
+esac
+exit 0
Copied: lm_sensors/repos/testing-x86_64/sensord.service (from rev 164347, lm_sensors/trunk/sensord.service)
===================================================================
--- testing-x86_64/sensord.service (rev 0)
+++ testing-x86_64/sensord.service 2012-07-31 04:47:30 UTC (rev 164348)
@@ -0,0 +1,9 @@
+[Unit]
+Description=Sensor information logging daemon
+
+[Service]
+PIDFile=/var/run/sensord.pid
+ExecStart=/usr/sbin/sensord
+
+[Install]
+WantedBy=multi-user.target
Copied: lm_sensors/repos/testing-x86_64/sensors.rc (from rev 164347, lm_sensors/trunk/sensors.rc)
===================================================================
--- testing-x86_64/sensors.rc (rev 0)
+++ testing-x86_64/sensors.rc 2012-07-31 04:47:30 UTC (rev 164348)
@@ -0,0 +1,119 @@
+#!/bin/bash
+
+# description: sensors is used for monitoring motherboard sensor values.
+# config: /etc/conf.d/lm_sensors
+
+# See also the lm_sensors homepage at:
+# http://www2.lm-sensors.nu/~lm78/index.html
+
+# It uses a config file /etc/conf.d/lm_sensors that contains the modules to
+# be loaded/unloaded. That file is sourced into this one.
+
+# The format of that file a shell script that simply defines the modules
+# in order as normal shell variables with the special names:
+# MODULE_1, MODULE_2, MODULE_3, etc.
+
+. /etc/rc.conf
+. /etc/rc.d/functions
+
+PSENSORS=/usr/bin/sensors
+
+if $(grep -q sysfs /proc/mounts); then
+ WITHSYS=1
+else
+ WITHSYS=0
+fi
+
+if [ $WITHSYS == "0" ]; then
+ # If sensors isn't supported by the kernel, try loading the module...
+ [ -e /proc/sys/dev/sensors ] || /sbin/modprobe i2c-proc &>/dev/null
+
+ # Don't bother if /proc/sensors still doesn't exist, kernel doesn't have support for sensors.
+ if ! [ -e /proc/sys/dev/sensors ]; then
+ echo "lm_sensors: kernel does not have sensors support"
+ stat_fail
+ fi
+
+ # If sensors was not already running, unload the module...
+ [ -e /var/run/daemons/sensors ] || /sbin/modprobe -r i2c-proc &>/dev/null
+fi
+
+if [ -e /etc/conf.d/lm_sensors ]; then
+ CONFIG=/etc/conf.d/lm_sensors
+elif [ -e /etc/sysconfig/lm_sensors ]; then
+ # Moving config to new Arch-specific location
+ mv /etc/sysconfig/lm_sensors /etc/conf.d/lm_sensors
+ CONFIG=/etc/conf.d/lm_sensors
+fi
+
+case "$1" in
+ start)
+ stat_busy "Starting Up Sensors"
+
+ if [ -r "$CONFIG" ]; then
+ . "$CONFIG"
+ modules=$(grep \^MODULE_ $CONFIG | wc -l | tr -d ' ')
+ i=0
+ while [ $i -lt $modules ] ; do
+ module=$(eval echo '$'MODULE_$i)
+ # echo starting module __${module}__ #debug
+ /sbin/modprobe $module &>/dev/null
+ i=$(expr $i + 1)
+ done
+ fi
+
+ $PSENSORS -s
+
+ if [ $? -gt 0 ]; then
+ stat_fail
+ else
+ add_daemon sensors
+ stat_done
+ fi
+ ;;
+
+ stop)
+ stat_busy "Shutting Down Sensors"
+
+ if [ -r "$CONFIG" ]; then
+ . "$CONFIG"
+ modules=$(grep \^MODULE_ $CONFIG | wc -l | tr -d ' ')
+ i=$(expr $modules - 1)
+ while [ $i -ge 0 ] ; do
+ module=$(eval echo '$'MODULE_$i)
+ # echo stoping module __${module}__ #debug
+ /sbin/modprobe -r $module &>/dev/null
+ i=$(expr $i - 1)
+ done
+ fi
+
+ if [ $WITHSYS == "0" ]; then
+ /sbin/modprobe -r i2c-proc &>/dev/null
+ fi
+
+ if [ $? -gt 0 ]; then
+ stat_fail
+ else
+ rm_daemon sensors
+ stat_done
+ fi
+ ;;
+
+ status)
+ $PSENSORS
+ ;;
+
+ restart)
+ $0 stop
+ sleep 1
+ $0 start
+ ;;
+
+ condrestart)
+ [ -e /var/run/daemons/sensors ] && $0 restart || :
+ ;;
+
+ *)
+ echo "Usage: $0 {start|stop|restart|status|condrestart}"
+esac
+exit 0
More information about the arch-commits
mailing list