[arch-commits] Commit in pacman/repos (12 files)
Allan McRae
allan at nymeria.archlinux.org
Mon Apr 1 06:36:08 UTC 2013
Date: Monday, April 1, 2013 @ 08:36:08
Author: allan
Revision: 181134
archrelease: copy trunk to testing-i686, testing-x86_64
Added:
pacman/repos/testing-i686/
pacman/repos/testing-i686/PKGBUILD
(from rev 181133, pacman/trunk/PKGBUILD)
pacman/repos/testing-i686/makepkg.conf
(from rev 181133, pacman/trunk/makepkg.conf)
pacman/repos/testing-i686/pacman.conf.i686
(from rev 181133, pacman/trunk/pacman.conf.i686)
pacman/repos/testing-i686/pacman.conf.x86_64
(from rev 181133, pacman/trunk/pacman.conf.x86_64)
pacman/repos/testing-i686/pacman.install
(from rev 181133, pacman/trunk/pacman.install)
pacman/repos/testing-x86_64/
pacman/repos/testing-x86_64/PKGBUILD
(from rev 181133, pacman/trunk/PKGBUILD)
pacman/repos/testing-x86_64/makepkg.conf
(from rev 181133, pacman/trunk/makepkg.conf)
pacman/repos/testing-x86_64/pacman.conf.i686
(from rev 181133, pacman/trunk/pacman.conf.i686)
pacman/repos/testing-x86_64/pacman.conf.x86_64
(from rev 181133, pacman/trunk/pacman.conf.x86_64)
pacman/repos/testing-x86_64/pacman.install
(from rev 181133, pacman/trunk/pacman.install)
-----------------------------------+
testing-i686/PKGBUILD | 79 ++++++++++++++++++++
testing-i686/makepkg.conf | 137 ++++++++++++++++++++++++++++++++++++
testing-i686/pacman.conf.i686 | 90 +++++++++++++++++++++++
testing-i686/pacman.conf.x86_64 | 99 ++++++++++++++++++++++++++
testing-i686/pacman.install | 75 +++++++++++++++++++
testing-x86_64/PKGBUILD | 79 ++++++++++++++++++++
testing-x86_64/makepkg.conf | 137 ++++++++++++++++++++++++++++++++++++
testing-x86_64/pacman.conf.i686 | 90 +++++++++++++++++++++++
testing-x86_64/pacman.conf.x86_64 | 99 ++++++++++++++++++++++++++
testing-x86_64/pacman.install | 75 +++++++++++++++++++
10 files changed, 960 insertions(+)
Copied: pacman/repos/testing-i686/PKGBUILD (from rev 181133, pacman/trunk/PKGBUILD)
===================================================================
--- testing-i686/PKGBUILD (rev 0)
+++ testing-i686/PKGBUILD 2013-04-01 06:36:08 UTC (rev 181134)
@@ -0,0 +1,79 @@
+# vim: set ts=2 sw=2 et:
+# $Id$
+# Maintainer: Dan McGee <dan at archlinux.org>
+# Maintainer: Dave Reisner <dreisner at archlinux.org>
+
+pkgname=pacman
+pkgver=4.1.0
+pkgrel=1
+pkgdesc="A library-based package manager with dependency support"
+arch=('i686' 'x86_64')
+url="http://www.archlinux.org/pacman/"
+license=('GPL')
+groups=('base' 'base-devel')
+depends=('bash' 'glibc>=2.15' 'libarchive>=3.1.2' 'curl>=7.19.4'
+ 'gpgme' 'pacman-mirrorlist' 'archlinux-keyring')
+makedepends=('asciidoc')
+checkdepends=('fakechroot')
+optdepends=('fakeroot: for makepkg usage as normal user')
+backup=(etc/pacman.conf etc/makepkg.conf)
+install=pacman.install
+options=(!libtool)
+source=(ftp://ftp.archlinux.org/other/pacman/$pkgname-$pkgver.tar.gz{,.sig}
+ pacman.conf.i686
+ pacman.conf.x86_64
+ makepkg.conf)
+md5sums=('a0f2b3148bee4784f21cf373cf59a0bc'
+ '4959b8d00056398195f4e549e7bdd346'
+ '2db6c94709bb30cc614a176ecf8badb1'
+ 'de74a13618347f08ae4a9637f74471c4'
+ '2ea6f0a5badef735ec7d30a372f5e9c6')
+
+build() {
+ cd $srcdir/$pkgname-$pkgver
+
+ ./configure --prefix=/usr --sysconfdir=/etc \
+ --localstatedir=/var --enable-doc
+ make
+ make -C contrib
+}
+
+check() {
+ make -C "$pkgname-$pkgver" check
+}
+
+package() {
+ cd $srcdir/$pkgname-$pkgver
+ make DESTDIR=$pkgdir install
+
+ # install Arch specific stuff
+ mkdir -p $pkgdir/etc
+ case "$CARCH" in
+ i686)
+ install -m644 $srcdir/pacman.conf.i686 $pkgdir/etc/pacman.conf
+ mycarch="i686"
+ mychost="i686-pc-linux-gnu"
+ myflags="-march=i686"
+ ;;
+ x86_64)
+ install -m644 $srcdir/pacman.conf.x86_64 $pkgdir/etc/pacman.conf
+ mycarch="x86_64"
+ mychost="x86_64-unknown-linux-gnu"
+ myflags="-march=x86-64"
+ ;;
+ esac
+ install -m644 $srcdir/makepkg.conf $pkgdir/etc/
+ # set things correctly in the default conf file
+ sed -i $pkgdir/etc/makepkg.conf \
+ -e "s|@CARCH[@]|$mycarch|g" \
+ -e "s|@CHOST[@]|$mychost|g" \
+ -e "s|@CARCHFLAGS[@]|$myflags|g"
+
+ # install completion files
+ install -Dm644 contrib/bash_completion "$pkgdir/usr/share/bash-completion/completions/pacman"
+ for f in makepkg pacman-key; do
+ ln -s pacman "$pkgdir/usr/share/bash-completion/completions/$f"
+ done
+
+ install -Dm644 contrib/zsh_completion $pkgdir/usr/share/zsh/site-functions/_pacman
+}
Copied: pacman/repos/testing-i686/makepkg.conf (from rev 181133, pacman/trunk/makepkg.conf)
===================================================================
--- testing-i686/makepkg.conf (rev 0)
+++ testing-i686/makepkg.conf 2013-04-01 06:36:08 UTC (rev 181134)
@@ -0,0 +1,137 @@
+#
+# /etc/makepkg.conf
+#
+
+#########################################################################
+# SOURCE ACQUISITION
+#########################################################################
+#
+#-- The download utilities that makepkg should use to acquire sources
+# Format: 'protocol::agent'
+DLAGENTS=('ftp::/usr/bin/curl -fC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %u'
+ 'http::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
+ 'https::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
+ 'rsync::/usr/bin/rsync -z %u %o'
+ 'scp::/usr/bin/scp -C %u %o')
+
+# Other common tools:
+# /usr/bin/snarf
+# /usr/bin/lftpget -c
+# /usr/bin/wget
+
+#########################################################################
+# ARCHITECTURE, COMPILE FLAGS
+#########################################################################
+#
+CARCH="@CARCH@"
+CHOST="@CHOST@"
+
+#-- Compiler and Linker Flags
+# -march (or -mcpu) builds exclusively for an architecture
+# -mtune optimizes for an architecture, but builds for whole processor family
+CPPFLAGS="-D_FORTIFY_SOURCE=2"
+CFLAGS="@CARCHFLAGS@ -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4"
+CXXFLAGS="@CARCHFLAGS@ -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4"
+LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro"
+#-- Make Flags: change this for DistCC/SMP systems
+#MAKEFLAGS="-j2"
+#-- Debugging flags
+#DEBUG_CFLAGS="-g -fvar-tracking-assignments"
+#DEBUG_CXXFLAGS="-g -fvar-tracking-assignments"
+
+#########################################################################
+# BUILD ENVIRONMENT
+#########################################################################
+#
+# Defaults: BUILDENV=(fakeroot !distcc color !ccache check !sign)
+# A negated environment option will do the opposite of the comments below.
+#
+#-- fakeroot: Allow building packages as a non-root user
+#-- distcc: Use the Distributed C/C++/ObjC compiler
+#-- color: Colorize output messages
+#-- ccache: Use ccache to cache compilation
+#-- check: Run the check() function if present in the PKGBUILD
+#-- sign: Generate PGP signature file
+#
+BUILDENV=(fakeroot !distcc color !ccache check !sign)
+#
+#-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
+#-- specify a space-delimited list of hosts running in the DistCC cluster.
+#DISTCC_HOSTS=""
+#
+#-- Specify a directory for package building.
+#BUILDDIR=/tmp/makepkg
+
+#########################################################################
+# GLOBAL PACKAGE OPTIONS
+# These are default values for the options=() settings
+#########################################################################
+#
+# Default: OPTIONS=(strip docs libtool staticlibs emptydirs zipman purge !upx !debug)
+# A negated option will do the opposite of the comments below.
+#
+#-- strip: Strip symbols from binaries/libraries
+#-- docs: Save doc directories specified by DOC_DIRS
+#-- libtool: Leave libtool (.la) files in packages
+#-- staticlibs: Leave static library (.a) files in packages
+#-- emptydirs: Leave empty directories in packages
+#-- zipman: Compress manual (man and info) pages in MAN_DIRS with gzip
+#-- purge: Remove files specified by PURGE_TARGETS
+#-- upx: Compress binary executable files using UPX
+#-- debug: Add debugging flags as specified in DEBUG_* variables
+#
+OPTIONS=(strip docs libtool staticlibs emptydirs zipman purge !upx !debug)
+
+#-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
+INTEGRITY_CHECK=(md5)
+#-- Options to be used when stripping binaries. See `man strip' for details.
+STRIP_BINARIES="--strip-all"
+#-- Options to be used when stripping shared libraries. See `man strip' for details.
+STRIP_SHARED="--strip-unneeded"
+#-- Options to be used when stripping static libraries. See `man strip' for details.
+STRIP_STATIC="--strip-debug"
+#-- Manual (man and info) directories to compress (if zipman is specified)
+MAN_DIRS=({usr{,/local}{,/share},opt/*}/{man,info})
+#-- Doc directories to remove (if !docs is specified)
+DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
+#-- Files to be removed from all packages (if purge is specified)
+PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)
+
+#########################################################################
+# PACKAGE OUTPUT
+#########################################################################
+#
+# Default: put built package and cached source in build directory
+#
+#-- Destination: specify a fixed directory where all packages will be placed
+#PKGDEST=/home/packages
+#-- Source cache: specify a fixed directory where source files will be cached
+#SRCDEST=/home/sources
+#-- Source packages: specify a fixed directory where all src packages will be placed
+#SRCPKGDEST=/home/srcpackages
+#-- Packager: name/email of the person or organization building packages
+#PACKAGER="John Doe <john at doe.com>"
+#-- Specify a key to use for package signing
+#GPGKEY=""
+
+#########################################################################
+# COMPRESSION DEFAULTS
+#########################################################################
+#
+COMPRESSGZ=(gzip -c -f -n)
+COMPRESSBZ2=(bzip2 -c -f)
+COMPRESSXZ=(xz -c -z -)
+COMPRESSZ=(compress -c -f)
+
+
+#########################################################################
+# EXTENSION DEFAULTS
+#########################################################################
+#
+# WARNING: Do NOT modify these variables unless you know what you are
+# doing.
+#
+PKGEXT='.pkg.tar.xz'
+SRCEXT='.src.tar.gz'
+
+# vim: set ft=sh ts=2 sw=2 et:
Copied: pacman/repos/testing-i686/pacman.conf.i686 (from rev 181133, pacman/trunk/pacman.conf.i686)
===================================================================
--- testing-i686/pacman.conf.i686 (rev 0)
+++ testing-i686/pacman.conf.i686 2013-04-01 06:36:08 UTC (rev 181134)
@@ -0,0 +1,90 @@
+#
+# /etc/pacman.conf
+#
+# See the pacman.conf(5) manpage for option and repository directives
+
+#
+# GENERAL OPTIONS
+#
+[options]
+# The following paths are commented out with their default values listed.
+# If you wish to use different paths, uncomment and update the paths.
+#RootDir = /
+#DBPath = /var/lib/pacman/
+#CacheDir = /var/cache/pacman/pkg/
+#LogFile = /var/log/pacman.log
+#GPGDir = /etc/pacman.d/gnupg/
+HoldPkg = pacman glibc
+#XferCommand = /usr/bin/curl -C - -f %u > %o
+#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
+#CleanMethod = KeepInstalled
+#UseDelta = 0.7
+Architecture = auto
+
+# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
+#IgnorePkg =
+#IgnoreGroup =
+
+#NoUpgrade =
+#NoExtract =
+
+# Misc options
+#UseSyslog
+#Color
+#TotalDownload
+CheckSpace
+#VerbosePkgLists
+
+# By default, pacman accepts packages signed by keys that its local keyring
+# trusts (see pacman-key and its man page), as well as unsigned packages.
+SigLevel = Required DatabaseOptional
+LocalFileSigLevel = Optional
+#RemoteFileSigLevel = Required
+
+# NOTE: You must run `pacman-key --init` before first using pacman; the local
+# keyring can then be populated with the keys of all official Arch Linux
+# packagers with `pacman-key --populate archlinux`.
+
+#
+# REPOSITORIES
+# - can be defined here or included from another file
+# - pacman will search repositories in the order defined here
+# - local/custom mirrors can be added here or in separate files
+# - repositories listed first will take precedence when packages
+# have identical names, regardless of version number
+# - URLs will have $repo replaced by the name of the current repo
+# - URLs will have $arch replaced by the name of the architecture
+#
+# Repository entries are of the format:
+# [repo-name]
+# Server = ServerName
+# Include = IncludePath
+#
+# The header [repo-name] is crucial - it must be present and
+# uncommented to enable the repo.
+#
+
+# The testing repositories are disabled by default. To enable, uncomment the
+# repo name header and Include lines. You can add preferred servers immediately
+# after the header, and they will be used before the default mirrors.
+
+#[testing]
+#Include = /etc/pacman.d/mirrorlist
+
+[core]
+Include = /etc/pacman.d/mirrorlist
+
+[extra]
+Include = /etc/pacman.d/mirrorlist
+
+#[community-testing]
+#Include = /etc/pacman.d/mirrorlist
+
+[community]
+Include = /etc/pacman.d/mirrorlist
+
+# An example of a custom package repository. See the pacman manpage for
+# tips on creating your own repositories.
+#[custom]
+#SigLevel = Optional TrustAll
+#Server = file:///home/custompkgs
Copied: pacman/repos/testing-i686/pacman.conf.x86_64 (from rev 181133, pacman/trunk/pacman.conf.x86_64)
===================================================================
--- testing-i686/pacman.conf.x86_64 (rev 0)
+++ testing-i686/pacman.conf.x86_64 2013-04-01 06:36:08 UTC (rev 181134)
@@ -0,0 +1,99 @@
+#
+# /etc/pacman.conf
+#
+# See the pacman.conf(5) manpage for option and repository directives
+
+#
+# GENERAL OPTIONS
+#
+[options]
+# The following paths are commented out with their default values listed.
+# If you wish to use different paths, uncomment and update the paths.
+#RootDir = /
+#DBPath = /var/lib/pacman/
+#CacheDir = /var/cache/pacman/pkg/
+#LogFile = /var/log/pacman.log
+#GPGDir = /etc/pacman.d/gnupg/
+HoldPkg = pacman glibc
+#XferCommand = /usr/bin/curl -C - -f %u > %o
+#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
+#CleanMethod = KeepInstalled
+#UseDelta = 0.7
+Architecture = auto
+
+# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
+#IgnorePkg =
+#IgnoreGroup =
+
+#NoUpgrade =
+#NoExtract =
+
+# Misc options
+#UseSyslog
+#Color
+#TotalDownload
+CheckSpace
+#VerbosePkgLists
+
+# By default, pacman accepts packages signed by keys that its local keyring
+# trusts (see pacman-key and its man page), as well as unsigned packages.
+SigLevel = Required DatabaseOptional
+LocalFileSigLevel = Optional
+#RemoteFileSigLevel = Required
+
+# NOTE: You must run `pacman-key --init` before first using pacman; the local
+# keyring can then be populated with the keys of all official Arch Linux
+# packagers with `pacman-key --populate archlinux`.
+
+#
+# REPOSITORIES
+# - can be defined here or included from another file
+# - pacman will search repositories in the order defined here
+# - local/custom mirrors can be added here or in separate files
+# - repositories listed first will take precedence when packages
+# have identical names, regardless of version number
+# - URLs will have $repo replaced by the name of the current repo
+# - URLs will have $arch replaced by the name of the architecture
+#
+# Repository entries are of the format:
+# [repo-name]
+# Server = ServerName
+# Include = IncludePath
+#
+# The header [repo-name] is crucial - it must be present and
+# uncommented to enable the repo.
+#
+
+# The testing repositories are disabled by default. To enable, uncomment the
+# repo name header and Include lines. You can add preferred servers immediately
+# after the header, and they will be used before the default mirrors.
+
+#[testing]
+#Include = /etc/pacman.d/mirrorlist
+
+[core]
+Include = /etc/pacman.d/mirrorlist
+
+[extra]
+Include = /etc/pacman.d/mirrorlist
+
+#[community-testing]
+#Include = /etc/pacman.d/mirrorlist
+
+[community]
+Include = /etc/pacman.d/mirrorlist
+
+# If you want to run 32 bit applications on your x86_64 system,
+# enable the multilib repositories as required here.
+
+#[multilib-testing]
+#Include = /etc/pacman.d/mirrorlist
+
+#[multilib]
+#Include = /etc/pacman.d/mirrorlist
+
+# An example of a custom package repository. See the pacman manpage for
+# tips on creating your own repositories.
+#[custom]
+#SigLevel = Optional TrustAll
+#Server = file:///home/custompkgs
Copied: pacman/repos/testing-i686/pacman.install (from rev 181133, pacman/trunk/pacman.install)
===================================================================
--- testing-i686/pacman.install (rev 0)
+++ testing-i686/pacman.install 2013-04-01 06:36:08 UTC (rev 181134)
@@ -0,0 +1,75 @@
+#!/bin/sh
+# arg 1: the new package version
+# arg 2: the old package version
+post_upgrade() {
+ # one time stuff for md5sum issue with older pacman versions
+ if [ "$(vercmp $2 3.0.2)" -lt 0 ]; then
+ _resetbackups
+ fi
+ if [ "$(vercmp $2 3.5.0)" -lt 0 ]; then
+ _warnupgrade
+ fi
+ if [ ! -f "etc/pacman.d/gnupg/pubring.gpg" ] || [ "$(vercmp $2 4.0.3-2)" -lt 0 ]; then
+ _check_pubring
+ fi
+}
+
+post_install() {
+ _check_pubring
+}
+
+_check_pubring() {
+ echo " >>> Run \`pacman-key --init; pacman-key --populate archlinux\`"
+ echo " >>> to import the data required by pacman for package verification."
+ echo " >>> See: https://www.archlinux.org/news/having-pacman-verify-packages"
+}
+
+_warnupgrade() {
+ echo ">>> The pacman database format has changed as of pacman 3.5.0."
+ echo ">>> You will need to run \`pacman-db-upgrade\` as root."
+ echo ">>>"
+}
+
+_resetbackups() {
+ echo ">>> Performing one-time reset of NoUpgrade md5sums. After this reset"
+ echo ">>> you are able to remove all NoUpgrade lines of already protected"
+ echo ">>> files from pacman.conf."
+ echo ">>>"
+
+ # path variables
+ pacconf="/etc/pacman.conf"
+ dbpath="/var/lib/pacman/local"
+
+ # get a list of NoUpgrade files from the user's pacman.conf
+ echo ">>> Retrieving pacman.conf NoUpgrade list..."
+ config=$(grep "^NoUpgrade" $pacconf | cut -d'=' -f2)
+ # add the standard list of files, even if they are already above
+ config="$config \
+ etc/passwd etc/group etc/shadow etc/sudoers \
+ etc/fstab etc/raidtab etc/ld.so.conf \
+ etc/rc.conf etc/rc.local \
+ etc/modprobe.conf etc/modules.conf \
+ etc/lilo.conf boot/grub/menu.lst"
+
+ # blank md5sum for use in sed expression
+ zeroes='00000000000000000000000000000000'
+
+ for file in $config; do
+ echo ">>> -> finding owner of /$file..."
+ line=$(LC_ALL=C LANG=C pacman -Qo /$file 2>/dev/null)
+ # if file is owned by a package, go find its incorrectly stored sum
+ if [ ! -z "$line" ]; then
+ # get the name and version of the package owning file
+ name=$(echo $line | awk '{print $5}')
+ version=$(echo $line | awk '{print $6}')
+ # set the path to the backup array holding the md5sum
+ path="$dbpath/$name-$version/files"
+ # run a sed on the path to reset the line containing $file
+ # NOTE: literal tab characters in sed expression after $file
+ echo ">>> -> resetting sum of /$file..."
+ sed -i "s#$file [0-9a-fA-F]*#$file $zeroes#" $path
+ else
+ echo ">>> -> $file is unowned."
+ fi
+ done
+}
Copied: pacman/repos/testing-x86_64/PKGBUILD (from rev 181133, pacman/trunk/PKGBUILD)
===================================================================
--- testing-x86_64/PKGBUILD (rev 0)
+++ testing-x86_64/PKGBUILD 2013-04-01 06:36:08 UTC (rev 181134)
@@ -0,0 +1,79 @@
+# vim: set ts=2 sw=2 et:
+# $Id$
+# Maintainer: Dan McGee <dan at archlinux.org>
+# Maintainer: Dave Reisner <dreisner at archlinux.org>
+
+pkgname=pacman
+pkgver=4.1.0
+pkgrel=1
+pkgdesc="A library-based package manager with dependency support"
+arch=('i686' 'x86_64')
+url="http://www.archlinux.org/pacman/"
+license=('GPL')
+groups=('base' 'base-devel')
+depends=('bash' 'glibc>=2.15' 'libarchive>=3.1.2' 'curl>=7.19.4'
+ 'gpgme' 'pacman-mirrorlist' 'archlinux-keyring')
+makedepends=('asciidoc')
+checkdepends=('fakechroot')
+optdepends=('fakeroot: for makepkg usage as normal user')
+backup=(etc/pacman.conf etc/makepkg.conf)
+install=pacman.install
+options=(!libtool)
+source=(ftp://ftp.archlinux.org/other/pacman/$pkgname-$pkgver.tar.gz{,.sig}
+ pacman.conf.i686
+ pacman.conf.x86_64
+ makepkg.conf)
+md5sums=('a0f2b3148bee4784f21cf373cf59a0bc'
+ '4959b8d00056398195f4e549e7bdd346'
+ '2db6c94709bb30cc614a176ecf8badb1'
+ 'de74a13618347f08ae4a9637f74471c4'
+ '2ea6f0a5badef735ec7d30a372f5e9c6')
+
+build() {
+ cd $srcdir/$pkgname-$pkgver
+
+ ./configure --prefix=/usr --sysconfdir=/etc \
+ --localstatedir=/var --enable-doc
+ make
+ make -C contrib
+}
+
+check() {
+ make -C "$pkgname-$pkgver" check
+}
+
+package() {
+ cd $srcdir/$pkgname-$pkgver
+ make DESTDIR=$pkgdir install
+
+ # install Arch specific stuff
+ mkdir -p $pkgdir/etc
+ case "$CARCH" in
+ i686)
+ install -m644 $srcdir/pacman.conf.i686 $pkgdir/etc/pacman.conf
+ mycarch="i686"
+ mychost="i686-pc-linux-gnu"
+ myflags="-march=i686"
+ ;;
+ x86_64)
+ install -m644 $srcdir/pacman.conf.x86_64 $pkgdir/etc/pacman.conf
+ mycarch="x86_64"
+ mychost="x86_64-unknown-linux-gnu"
+ myflags="-march=x86-64"
+ ;;
+ esac
+ install -m644 $srcdir/makepkg.conf $pkgdir/etc/
+ # set things correctly in the default conf file
+ sed -i $pkgdir/etc/makepkg.conf \
+ -e "s|@CARCH[@]|$mycarch|g" \
+ -e "s|@CHOST[@]|$mychost|g" \
+ -e "s|@CARCHFLAGS[@]|$myflags|g"
+
+ # install completion files
+ install -Dm644 contrib/bash_completion "$pkgdir/usr/share/bash-completion/completions/pacman"
+ for f in makepkg pacman-key; do
+ ln -s pacman "$pkgdir/usr/share/bash-completion/completions/$f"
+ done
+
+ install -Dm644 contrib/zsh_completion $pkgdir/usr/share/zsh/site-functions/_pacman
+}
Copied: pacman/repos/testing-x86_64/makepkg.conf (from rev 181133, pacman/trunk/makepkg.conf)
===================================================================
--- testing-x86_64/makepkg.conf (rev 0)
+++ testing-x86_64/makepkg.conf 2013-04-01 06:36:08 UTC (rev 181134)
@@ -0,0 +1,137 @@
+#
+# /etc/makepkg.conf
+#
+
+#########################################################################
+# SOURCE ACQUISITION
+#########################################################################
+#
+#-- The download utilities that makepkg should use to acquire sources
+# Format: 'protocol::agent'
+DLAGENTS=('ftp::/usr/bin/curl -fC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %u'
+ 'http::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
+ 'https::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
+ 'rsync::/usr/bin/rsync -z %u %o'
+ 'scp::/usr/bin/scp -C %u %o')
+
+# Other common tools:
+# /usr/bin/snarf
+# /usr/bin/lftpget -c
+# /usr/bin/wget
+
+#########################################################################
+# ARCHITECTURE, COMPILE FLAGS
+#########################################################################
+#
+CARCH="@CARCH@"
+CHOST="@CHOST@"
+
+#-- Compiler and Linker Flags
+# -march (or -mcpu) builds exclusively for an architecture
+# -mtune optimizes for an architecture, but builds for whole processor family
+CPPFLAGS="-D_FORTIFY_SOURCE=2"
+CFLAGS="@CARCHFLAGS@ -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4"
+CXXFLAGS="@CARCHFLAGS@ -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4"
+LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro"
+#-- Make Flags: change this for DistCC/SMP systems
+#MAKEFLAGS="-j2"
+#-- Debugging flags
+#DEBUG_CFLAGS="-g -fvar-tracking-assignments"
+#DEBUG_CXXFLAGS="-g -fvar-tracking-assignments"
+
+#########################################################################
+# BUILD ENVIRONMENT
+#########################################################################
+#
+# Defaults: BUILDENV=(fakeroot !distcc color !ccache check !sign)
+# A negated environment option will do the opposite of the comments below.
+#
+#-- fakeroot: Allow building packages as a non-root user
+#-- distcc: Use the Distributed C/C++/ObjC compiler
+#-- color: Colorize output messages
+#-- ccache: Use ccache to cache compilation
+#-- check: Run the check() function if present in the PKGBUILD
+#-- sign: Generate PGP signature file
+#
+BUILDENV=(fakeroot !distcc color !ccache check !sign)
+#
+#-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
+#-- specify a space-delimited list of hosts running in the DistCC cluster.
+#DISTCC_HOSTS=""
+#
+#-- Specify a directory for package building.
+#BUILDDIR=/tmp/makepkg
+
+#########################################################################
+# GLOBAL PACKAGE OPTIONS
+# These are default values for the options=() settings
+#########################################################################
+#
+# Default: OPTIONS=(strip docs libtool staticlibs emptydirs zipman purge !upx !debug)
+# A negated option will do the opposite of the comments below.
+#
+#-- strip: Strip symbols from binaries/libraries
+#-- docs: Save doc directories specified by DOC_DIRS
+#-- libtool: Leave libtool (.la) files in packages
+#-- staticlibs: Leave static library (.a) files in packages
+#-- emptydirs: Leave empty directories in packages
+#-- zipman: Compress manual (man and info) pages in MAN_DIRS with gzip
+#-- purge: Remove files specified by PURGE_TARGETS
+#-- upx: Compress binary executable files using UPX
+#-- debug: Add debugging flags as specified in DEBUG_* variables
+#
+OPTIONS=(strip docs libtool staticlibs emptydirs zipman purge !upx !debug)
+
+#-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
+INTEGRITY_CHECK=(md5)
+#-- Options to be used when stripping binaries. See `man strip' for details.
+STRIP_BINARIES="--strip-all"
+#-- Options to be used when stripping shared libraries. See `man strip' for details.
+STRIP_SHARED="--strip-unneeded"
+#-- Options to be used when stripping static libraries. See `man strip' for details.
+STRIP_STATIC="--strip-debug"
+#-- Manual (man and info) directories to compress (if zipman is specified)
+MAN_DIRS=({usr{,/local}{,/share},opt/*}/{man,info})
+#-- Doc directories to remove (if !docs is specified)
+DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
+#-- Files to be removed from all packages (if purge is specified)
+PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)
+
+#########################################################################
+# PACKAGE OUTPUT
+#########################################################################
+#
+# Default: put built package and cached source in build directory
+#
+#-- Destination: specify a fixed directory where all packages will be placed
+#PKGDEST=/home/packages
+#-- Source cache: specify a fixed directory where source files will be cached
+#SRCDEST=/home/sources
+#-- Source packages: specify a fixed directory where all src packages will be placed
+#SRCPKGDEST=/home/srcpackages
+#-- Packager: name/email of the person or organization building packages
+#PACKAGER="John Doe <john at doe.com>"
+#-- Specify a key to use for package signing
+#GPGKEY=""
+
+#########################################################################
+# COMPRESSION DEFAULTS
+#########################################################################
+#
+COMPRESSGZ=(gzip -c -f -n)
+COMPRESSBZ2=(bzip2 -c -f)
+COMPRESSXZ=(xz -c -z -)
+COMPRESSZ=(compress -c -f)
+
+
+#########################################################################
+# EXTENSION DEFAULTS
+#########################################################################
+#
+# WARNING: Do NOT modify these variables unless you know what you are
+# doing.
+#
+PKGEXT='.pkg.tar.xz'
+SRCEXT='.src.tar.gz'
+
+# vim: set ft=sh ts=2 sw=2 et:
Copied: pacman/repos/testing-x86_64/pacman.conf.i686 (from rev 181133, pacman/trunk/pacman.conf.i686)
===================================================================
--- testing-x86_64/pacman.conf.i686 (rev 0)
+++ testing-x86_64/pacman.conf.i686 2013-04-01 06:36:08 UTC (rev 181134)
@@ -0,0 +1,90 @@
+#
+# /etc/pacman.conf
+#
+# See the pacman.conf(5) manpage for option and repository directives
+
+#
+# GENERAL OPTIONS
+#
+[options]
+# The following paths are commented out with their default values listed.
+# If you wish to use different paths, uncomment and update the paths.
+#RootDir = /
+#DBPath = /var/lib/pacman/
+#CacheDir = /var/cache/pacman/pkg/
+#LogFile = /var/log/pacman.log
+#GPGDir = /etc/pacman.d/gnupg/
+HoldPkg = pacman glibc
+#XferCommand = /usr/bin/curl -C - -f %u > %o
+#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
+#CleanMethod = KeepInstalled
+#UseDelta = 0.7
+Architecture = auto
+
+# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
+#IgnorePkg =
+#IgnoreGroup =
+
+#NoUpgrade =
+#NoExtract =
+
+# Misc options
+#UseSyslog
+#Color
+#TotalDownload
+CheckSpace
+#VerbosePkgLists
+
+# By default, pacman accepts packages signed by keys that its local keyring
+# trusts (see pacman-key and its man page), as well as unsigned packages.
+SigLevel = Required DatabaseOptional
+LocalFileSigLevel = Optional
+#RemoteFileSigLevel = Required
+
+# NOTE: You must run `pacman-key --init` before first using pacman; the local
+# keyring can then be populated with the keys of all official Arch Linux
+# packagers with `pacman-key --populate archlinux`.
+
+#
+# REPOSITORIES
+# - can be defined here or included from another file
+# - pacman will search repositories in the order defined here
+# - local/custom mirrors can be added here or in separate files
+# - repositories listed first will take precedence when packages
+# have identical names, regardless of version number
+# - URLs will have $repo replaced by the name of the current repo
+# - URLs will have $arch replaced by the name of the architecture
+#
+# Repository entries are of the format:
+# [repo-name]
+# Server = ServerName
+# Include = IncludePath
+#
+# The header [repo-name] is crucial - it must be present and
+# uncommented to enable the repo.
+#
+
+# The testing repositories are disabled by default. To enable, uncomment the
+# repo name header and Include lines. You can add preferred servers immediately
+# after the header, and they will be used before the default mirrors.
+
+#[testing]
+#Include = /etc/pacman.d/mirrorlist
+
+[core]
+Include = /etc/pacman.d/mirrorlist
+
+[extra]
+Include = /etc/pacman.d/mirrorlist
+
+#[community-testing]
+#Include = /etc/pacman.d/mirrorlist
+
+[community]
+Include = /etc/pacman.d/mirrorlist
+
+# An example of a custom package repository. See the pacman manpage for
+# tips on creating your own repositories.
+#[custom]
+#SigLevel = Optional TrustAll
+#Server = file:///home/custompkgs
Copied: pacman/repos/testing-x86_64/pacman.conf.x86_64 (from rev 181133, pacman/trunk/pacman.conf.x86_64)
===================================================================
--- testing-x86_64/pacman.conf.x86_64 (rev 0)
+++ testing-x86_64/pacman.conf.x86_64 2013-04-01 06:36:08 UTC (rev 181134)
@@ -0,0 +1,99 @@
+#
+# /etc/pacman.conf
+#
+# See the pacman.conf(5) manpage for option and repository directives
+
+#
+# GENERAL OPTIONS
+#
+[options]
+# The following paths are commented out with their default values listed.
+# If you wish to use different paths, uncomment and update the paths.
+#RootDir = /
+#DBPath = /var/lib/pacman/
+#CacheDir = /var/cache/pacman/pkg/
+#LogFile = /var/log/pacman.log
+#GPGDir = /etc/pacman.d/gnupg/
+HoldPkg = pacman glibc
+#XferCommand = /usr/bin/curl -C - -f %u > %o
+#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
+#CleanMethod = KeepInstalled
+#UseDelta = 0.7
+Architecture = auto
+
+# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
+#IgnorePkg =
+#IgnoreGroup =
+
+#NoUpgrade =
+#NoExtract =
+
+# Misc options
+#UseSyslog
+#Color
+#TotalDownload
+CheckSpace
+#VerbosePkgLists
+
+# By default, pacman accepts packages signed by keys that its local keyring
+# trusts (see pacman-key and its man page), as well as unsigned packages.
+SigLevel = Required DatabaseOptional
+LocalFileSigLevel = Optional
+#RemoteFileSigLevel = Required
+
+# NOTE: You must run `pacman-key --init` before first using pacman; the local
+# keyring can then be populated with the keys of all official Arch Linux
+# packagers with `pacman-key --populate archlinux`.
+
+#
+# REPOSITORIES
+# - can be defined here or included from another file
+# - pacman will search repositories in the order defined here
+# - local/custom mirrors can be added here or in separate files
+# - repositories listed first will take precedence when packages
+# have identical names, regardless of version number
+# - URLs will have $repo replaced by the name of the current repo
+# - URLs will have $arch replaced by the name of the architecture
+#
+# Repository entries are of the format:
+# [repo-name]
+# Server = ServerName
+# Include = IncludePath
+#
+# The header [repo-name] is crucial - it must be present and
+# uncommented to enable the repo.
+#
+
+# The testing repositories are disabled by default. To enable, uncomment the
+# repo name header and Include lines. You can add preferred servers immediately
+# after the header, and they will be used before the default mirrors.
+
+#[testing]
+#Include = /etc/pacman.d/mirrorlist
+
+[core]
+Include = /etc/pacman.d/mirrorlist
+
+[extra]
+Include = /etc/pacman.d/mirrorlist
+
+#[community-testing]
+#Include = /etc/pacman.d/mirrorlist
+
+[community]
+Include = /etc/pacman.d/mirrorlist
+
+# If you want to run 32 bit applications on your x86_64 system,
+# enable the multilib repositories as required here.
+
+#[multilib-testing]
+#Include = /etc/pacman.d/mirrorlist
+
+#[multilib]
+#Include = /etc/pacman.d/mirrorlist
+
+# An example of a custom package repository. See the pacman manpage for
+# tips on creating your own repositories.
+#[custom]
+#SigLevel = Optional TrustAll
+#Server = file:///home/custompkgs
Copied: pacman/repos/testing-x86_64/pacman.install (from rev 181133, pacman/trunk/pacman.install)
===================================================================
--- testing-x86_64/pacman.install (rev 0)
+++ testing-x86_64/pacman.install 2013-04-01 06:36:08 UTC (rev 181134)
@@ -0,0 +1,75 @@
+#!/bin/sh
+# arg 1: the new package version
+# arg 2: the old package version
+post_upgrade() {
+ # one time stuff for md5sum issue with older pacman versions
+ if [ "$(vercmp $2 3.0.2)" -lt 0 ]; then
+ _resetbackups
+ fi
+ if [ "$(vercmp $2 3.5.0)" -lt 0 ]; then
+ _warnupgrade
+ fi
+ if [ ! -f "etc/pacman.d/gnupg/pubring.gpg" ] || [ "$(vercmp $2 4.0.3-2)" -lt 0 ]; then
+ _check_pubring
+ fi
+}
+
+post_install() {
+ _check_pubring
+}
+
+_check_pubring() {
+ echo " >>> Run \`pacman-key --init; pacman-key --populate archlinux\`"
+ echo " >>> to import the data required by pacman for package verification."
+ echo " >>> See: https://www.archlinux.org/news/having-pacman-verify-packages"
+}
+
+_warnupgrade() {
+ echo ">>> The pacman database format has changed as of pacman 3.5.0."
+ echo ">>> You will need to run \`pacman-db-upgrade\` as root."
+ echo ">>>"
+}
+
+_resetbackups() {
+ echo ">>> Performing one-time reset of NoUpgrade md5sums. After this reset"
+ echo ">>> you are able to remove all NoUpgrade lines of already protected"
+ echo ">>> files from pacman.conf."
+ echo ">>>"
+
+ # path variables
+ pacconf="/etc/pacman.conf"
+ dbpath="/var/lib/pacman/local"
+
+ # get a list of NoUpgrade files from the user's pacman.conf
+ echo ">>> Retrieving pacman.conf NoUpgrade list..."
+ config=$(grep "^NoUpgrade" $pacconf | cut -d'=' -f2)
+ # add the standard list of files, even if they are already above
+ config="$config \
+ etc/passwd etc/group etc/shadow etc/sudoers \
+ etc/fstab etc/raidtab etc/ld.so.conf \
+ etc/rc.conf etc/rc.local \
+ etc/modprobe.conf etc/modules.conf \
+ etc/lilo.conf boot/grub/menu.lst"
+
+ # blank md5sum for use in sed expression
+ zeroes='00000000000000000000000000000000'
+
+ for file in $config; do
+ echo ">>> -> finding owner of /$file..."
+ line=$(LC_ALL=C LANG=C pacman -Qo /$file 2>/dev/null)
+ # if file is owned by a package, go find its incorrectly stored sum
+ if [ ! -z "$line" ]; then
+ # get the name and version of the package owning file
+ name=$(echo $line | awk '{print $5}')
+ version=$(echo $line | awk '{print $6}')
+ # set the path to the backup array holding the md5sum
+ path="$dbpath/$name-$version/files"
+ # run a sed on the path to reset the line containing $file
+ # NOTE: literal tab characters in sed expression after $file
+ echo ">>> -> resetting sum of /$file..."
+ sed -i "s#$file [0-9a-fA-F]*#$file $zeroes#" $path
+ else
+ echo ">>> -> $file is unowned."
+ fi
+ done
+}
More information about the arch-commits
mailing list