[arch-commits] Commit in gnome-applets/trunk (01_battstat_upower.patch PKGBUILD)
Balló György
bgyorgy at nymeria.archlinux.org
Wed Apr 10 17:39:32 UTC 2013
Date: Wednesday, April 10, 2013 @ 19:39:32
Author: bgyorgy
Revision: 88046
upgpkg: gnome-applets 3.5.92-3
Add UPower support, add missing gstreamer0.10-base-plugins dependency for the mixer applet
Added:
gnome-applets/trunk/01_battstat_upower.patch
Modified:
gnome-applets/trunk/PKGBUILD
--------------------------+
01_battstat_upower.patch | 622 +++++++++++++++++++++++++++++++++++++++++++++
PKGBUILD | 17 -
2 files changed, 633 insertions(+), 6 deletions(-)
Added: 01_battstat_upower.patch
===================================================================
--- 01_battstat_upower.patch (rev 0)
+++ 01_battstat_upower.patch 2013-04-10 17:39:32 UTC (rev 88046)
@@ -0,0 +1,622 @@
+From 18a2f4aa3ba2c8c9fc3718b15a9ab366fdd35f05 Mon Sep 17 00:00:00 2001
+From: Joachim Breitner <mail at joachim-breitner.de>
+Date: Mon, 5 Jul 2010 12:20:04 +0200
+Subject: [PATCH] [battstat applet] upower support
+
+As HAL is being deprecated, the battstat applet is adjusted to talk to
+upower, using libupower-glib. (Bug #607254)
+---
+ battstat/Makefile.am | 6 +-
+ battstat/battstat-upower.c | 330 +++++++++++++++++++++++++++++++++++++++++
+ battstat/battstat-upower.h | 33 ++++
+ battstat/battstat_applet.c | 7 +-
+ battstat/docs/C/battstat.xml | 18 ++-
+ battstat/docs/de/battstat.xml | 22 +++-
+ battstat/docs/eu/battstat.xml | 20 ++-
+ battstat/power-management.c | 66 +++++++--
+ configure.in | 22 +++
+ 9 files changed, 493 insertions(+), 31 deletions(-)
+ create mode 100644 battstat/battstat-upower.c
+ create mode 100644 battstat/battstat-upower.h
+
+Index: gnome-applets-3.4.1/battstat/Makefile.am
+===================================================================
+--- gnome-applets-3.4.1.orig/battstat/Makefile.am 2012-04-13 19:02:29.000000000 +0200
++++ gnome-applets-3.4.1/battstat/Makefile.am 2012-04-19 00:28:17.246029051 +0200
+@@ -27,6 +27,7 @@
+ $(GNOME_APPLETS_CFLAGS) \
+ $(LIBNOTIFY_CFLAGS) \
+ $(HAL_CFLAGS) \
++ $(UPOWER_CFLAGS) \
+ $(APMINC) \
+ $(ACPIINC) \
+ $(WARN_CFLAGS) \
+@@ -48,13 +49,17 @@
+ acpi-freebsd.c \
+ acpi-freebsd.h \
+ battstat-hal.c \
+- battstat-hal.h
++ battstat-hal.h \
++ battstat-upower.c \
++ battstat-upower.h
+
+
+ battstat_applet_2_LDADD = \
+ $(GNOME_APPLETS_LIBS) \
+ $(LIBNOTIFY_LIBS) \
+ $(HAL_LIBS) \
++ $(UPOWER_LIBS) \
++ $(LIBM) \
+ $(APMLIB)
+
+ schemasdir = @GCONF_SCHEMA_FILE_DIR@
+Index: gnome-applets-3.4.1/battstat/battstat-upower.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ gnome-applets-3.4.1/battstat/battstat-upower.c 2012-04-19 00:28:17.246029051 +0200
+@@ -0,0 +1,301 @@
++/*
++ * Copyright (C) 2010 by Joachim Breitner <mail at joachim-breitner.de>
++ *
++ * Based on battstat-hal.c:
++ * Copyright (C) 2005 by Ryan Lortie <desrt at desrt.ca>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Street #330, Boston, MA 02111-1307, USA.
++ *
++ * $Id$
++ */
++
++#include <config.h>
++
++#ifdef HAVE_UPOWER
++
++#include <upower.h>
++#include <math.h>
++
++#include "battstat-upower.h"
++
++static UpClient *upc;
++static void (*status_updated_callback) (void);
++
++
++/* status_updated_callback() can not be called directly because at the time of
++ * the device-remove signal, the device is not actually removed from the list
++ * of devices known to the up_client object (see libupower-glib/up-client.c in
++ * upower). Waiting for the next idle timer works around this issue and has has
++ * the additionaly benefit of possibly running status_updated_callback only
++ * once when several events happen very soon after each other.
++ */
++static gboolean status_update_scheduled;
++
++static gboolean
++update_status_idle (gpointer junk)
++{
++ if (status_updated_callback)
++ status_updated_callback ();
++
++ return status_update_scheduled = FALSE;
++}
++
++static void
++schedule_status_callback (void)
++{
++ if (status_update_scheduled)
++ return;
++
++ status_update_scheduled = TRUE;
++ g_idle_add (update_status_idle, NULL);
++}
++
++static void
++device_cb (UpClient *client, UpDevice *device, gpointer user_data) {
++ schedule_status_callback();
++}
++
++/* ---- public functions ---- */
++
++char *
++battstat_upower_initialise (void (*callback) (void))
++{
++ status_updated_callback = callback;
++
++ if( upc != NULL )
++ return g_strdup( "Already initialised!" );
++
++ if( (upc = up_client_new() ) == NULL )
++ goto error_out;
++
++ if (! up_client_enumerate_devices_sync( upc, NULL, NULL ) ) {
++ goto error_shutdownclient;
++ }
++
++ g_signal_connect_after( upc, "device-changed", device_cb, NULL );
++ g_signal_connect_after( upc, "device-added", device_cb, NULL );
++ g_signal_connect_after( upc, "device-removed", device_cb, NULL );
++
++ return NULL;
++
++error_shutdownclient:
++ g_object_unref( upc );
++ upc = NULL;
++
++error_out:
++ return "Can not initialize upower";
++}
++
++void
++battstat_upower_cleanup( void )
++{
++ if( upc == NULL )
++ return;
++
++ g_object_unref( upc );
++ upc = NULL;
++}
++
++#include "battstat.h"
++
++/* This function currently exists to allow the multiple batteries supported
++ * by the upower backend to appear as a single composite battery device (since
++ * at the current time this is all that battstat supports).
++ *
++ * This entire function is filled with logic to make multiple batteries
++ * appear as one "composite" battery. Comments included as appropriate.
++ *
++ * For more information about some of the assumptions made in the following
++ * code please see the following mailing list post and the resulting thread:
++ *
++ * http://lists.freedesktop.org/archives/hal/2005-July/002841.html
++ */
++void
++battstat_upower_get_battery_info( BatteryStatus *status )
++{
++
++ GPtrArray *devices = up_client_get_devices( upc );
++
++ /* The calculation to get overall percentage power remaining is as follows:
++ *
++ * Sum( Current charges ) / Sum( Full Capacities )
++ *
++ * We can't just take an average of all of the percentages since this
++ * doesn't deal with the case that one battery might have a larger
++ * capacity than the other.
++ *
++ * In order to do this calculation, we need to keep a running total of
++ * current charge and full capacities.
++ */
++ double current_charge_total = 0, full_capacity_total = 0;
++
++ /* Record the time remaining as reported by upower. This is used in the event
++ * that the system has exactly one battery (since, then, upower is capable
++ * of providing an accurate time remaining report and we should trust it.)
++ */
++ gint64 remaining_time = 0;
++
++ /* The total (dis)charge rate of the system is the sum of the rates of
++ * the individual batteries.
++ */
++ double rate_total = 0;
++
++ /* We need to know if we should report the composite battery as present
++ * at all. The logic is that if at least one actual battery is installed
++ * then the composite battery will be reported to exist.
++ */
++ int present = 0;
++
++ /* We need to know if we are on AC power or not. Eventually, we can look
++ * at the AC adaptor upower devices to determine that. For now, we assume that
++ * if any battery is discharging then we must not be on AC power. Else, by
++ * default, we must be on AC.
++ */
++ int on_ac_power = 1;
++
++ /* Finally, we consider the composite battery to be "charging" if at least
++ * one of the actual batteries in the system is charging.
++ */
++ int charging = 0;
++
++ /* For each physical battery bay... */
++ int i;
++ for( i = 0; i < devices->len; i++ )
++ {
++ UpDevice *upd = g_ptr_array_index( devices, i );
++
++ int type, state;
++ double current_charge, full_capacity, rate;
++ gint64 time_to_full, time_to_empty;
++
++ g_object_get( upd,
++ "kind", &type,
++ "state", &state,
++ "energy", ¤t_charge,
++ "energy-full", &full_capacity,
++ "energy-rate", &rate,
++ "time-to-full", &time_to_full,
++ "time-to-empty", &time_to_empty,
++ NULL );
++
++ /* Only count batteries here */
++
++ if (type != UP_DEVICE_KIND_BATTERY)
++ continue;
++
++ /* At least one battery present -> composite battery is present. */
++ present++;
++
++ /* At least one battery charging -> composite battery is charging. */
++ if( state == UP_DEVICE_STATE_CHARGING )
++ charging = 1;
++
++ /* At least one battery is discharging -> we're not on AC. */
++ if( state == UP_DEVICE_STATE_DISCHARGING )
++ on_ac_power = 0;
++
++ /* Sum the totals for current charge, design capacity, (dis)charge rate. */
++ current_charge_total += current_charge;
++ full_capacity_total += full_capacity;
++ rate_total += rate;
++
++ /* Record remaining time too, incase this is the only battery. */
++ remaining_time = (state == UP_DEVICE_STATE_DISCHARGING ? time_to_empty : time_to_full);
++ }
++
++ if( !present || full_capacity_total <= 0 || (charging && !on_ac_power) )
++ {
++ /* Either no battery is present or something has gone horribly wrong.
++ * In either case we must return that the composite battery is not
++ * present.
++ */
++ status->present = FALSE;
++ status->percent = 0;
++ status->minutes = -1;
++ status->on_ac_power = TRUE;
++ status->charging = FALSE;
++
++ g_ptr_array_unref( devices );
++ return;
++ }
++
++ /* Else, our composite battery is present. */
++ status->present = TRUE;
++
++ /* As per above, overall charge is:
++ *
++ * Sum( Current charges ) / Sum( Full Capacities )
++ */
++ status->percent = ( current_charge_total / full_capacity_total ) * 100.0 + 0.5;
++
++ if( present == 1 )
++ {
++ /* In the case of exactly one battery, report the time remaining figure
++ * from upower directly since it might have come from an authorative source
++ * (ie: the PMU or APM subsystem).
++ *
++ * upower gives remaining time in seconds with a 0 to mean that the
++ * remaining time is unknown. Battstat uses minutes and -1 for
++ * unknown time remaining.
++ */
++
++ if( remaining_time == 0 )
++ status->minutes = -1;
++ else
++ status->minutes = (remaining_time + 30) / 60;
++ }
++ /* Rest of cases to deal with multiple battery systems... */
++ else if( !on_ac_power && rate_total != 0 )
++ {
++ /* Then we're discharging. Calculate time remaining until at zero. */
++
++ double remaining;
++
++ remaining = current_charge_total;
++ remaining /= rate_total;
++ status->minutes = (int) floor( remaining * 60.0 + 0.5 );
++ }
++ else if( charging && rate_total != 0 )
++ {
++ /* Calculate time remaining until charged. For systems with more than
++ * one battery, this code is very approximate. The assumption is that if
++ * one battery reaches full charge before the other that the other will
++ * start charging faster due to the increase in available power (similar
++ * to how a laptop will charge faster if you're not using it).
++ */
++
++ double remaining;
++
++ remaining = full_capacity_total - current_charge_total;
++ if( remaining < 0 )
++ remaining = 0;
++ remaining /= rate_total;
++
++ status->minutes = (int) floor( remaining * 60.0 + 0.5 );
++ }
++ else
++ {
++ /* On AC power and not charging -or- rate is unknown. */
++ status->minutes = -1;
++ }
++
++ /* These are simple and well-explained above. */
++ status->charging = charging;
++ status->on_ac_power = on_ac_power;
++
++ g_ptr_array_unref( devices );
++}
++
++#endif /* HAVE_UPOWER */
+Index: gnome-applets-3.4.1/battstat/battstat-upower.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ gnome-applets-3.4.1/battstat/battstat-upower.h 2012-04-19 00:28:17.254029051 +0200
+@@ -0,0 +1,33 @@
++/*
++ * Copyright (C) 2010 by Joachim Breitner <mail at joachim-breitner.de>
++ *
++ * Based on battstat-hal.h:
++ * Copyright (C) 2005 by Ryan Lortie <desrt at desrt.ca>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Street #330, Boston, MA 02111-1307, USA.
++ *
++ * $Id$
++ */
++
++#ifndef _battstat_upower_h_
++#define _battstat_upower_h_
++
++char *battstat_upower_initialise (void (*) (void));
++void battstat_upower_cleanup (void);
++
++#include "battstat.h"
++void battstat_upower_get_battery_info (BatteryStatus *status);
++
++#endif /* _battstat_upower_h_ */
+Index: gnome-applets-3.4.1/battstat/battstat_applet.c
+===================================================================
+--- gnome-applets-3.4.1.orig/battstat/battstat_applet.c 2012-04-13 19:02:29.000000000 +0200
++++ gnome-applets-3.4.1/battstat/battstat_applet.c 2012-04-19 00:28:17.254029051 +0200
+@@ -1188,9 +1188,12 @@
+
+ char *comments = g_strdup_printf ("%s\n\n%s",
+ _("This utility shows the status of your laptop battery."),
+- power_management_using_hal () ?
++ power_management_using_upower () ?
++ /* true */ _("upower backend enabled.") :
++ (power_management_using_hal () ?
+ /* true */ _("HAL backend enabled.") :
+- /* false */ _("Legacy (non-HAL) backend enabled."));
++ /* false */ _("Legacy (non-HAL) backend enabled.")
++ ));
+
+ gtk_show_about_dialog( NULL,
+ "version", VERSION,
+Index: gnome-applets-3.4.1/battstat/docs/C/battstat.xml
+===================================================================
+--- gnome-applets-3.4.1.orig/battstat/docs/C/battstat.xml 2012-04-15 15:49:58.000000000 +0200
++++ gnome-applets-3.4.1/battstat/docs/C/battstat.xml 2012-04-19 00:28:17.254029051 +0200
+@@ -226,10 +226,13 @@
+ <title>Power Management Backends</title>
+
+ <para>
+- The battery monitor supports a number of power management backends. If it
+- is available, the monitor will attempt to use the freedesktop.org
+- <ulink url="http://freedesktop.org/Software/hal">HAL (Hardware Abstraction
+- Layer)</ulink>. If it is unavailable or unsupported on your platform, the
++ The battery monitor supports a number of power management backends.
++ If it is available, the monitor will attempt to use the freedesktop.org
++ <ulink url="http://upower.freedesktop.org/">upower</ulink> interface.
++ If it is unavailable or unsupported on your platform, it will fall back
++ to the freedesktop.org
++ <ulink url="http://freedesktop.org/Software/hal">HAL (Hardware
++ Abstraction Layer)</ulink>. If that is also not availble, the
+ battery monitor will attempt direct access to the power management system.
+ </para>
+ <para>
+@@ -410,10 +413,10 @@
+ <sect2 id="battstat-troubleshooting-backends">
+ <title>Determining the backend</title>
+ <para>
+- If you are using the Hardware Abstraction Layer
+- (see <xref linkend="battstat-power-backends"/>) then that will be
+- indicated in the about dialog by placing a star next to the author of the
+- HAL backend.
++ If you are using the upower interface, or the the Hardware
++ Abstraction Layer (see <xref linkend="battstat-power-backends"/>) then
++ that will be indicated in the about dialog by placing a star next to the
++ author of the HAL backend.
+ <figure id="battstat-credits-hal">
+ <title>Check you're using the HAL backend</title>
+ <screenshot>
+Index: gnome-applets-3.4.1/battstat/power-management.c
+===================================================================
+--- gnome-applets-3.4.1.orig/battstat/power-management.c 2012-04-13 19:02:29.000000000 +0200
++++ gnome-applets-3.4.1/battstat/power-management.c 2012-04-19 00:28:17.254029051 +0200
+@@ -41,6 +41,7 @@
+
+ #include "battstat.h"
+ #include "battstat-hal.h"
++#include "battstat-upower.h"
+
+ #define ERR_ACPID _("Can't access ACPI events in /var/run/acpid.socket! " \
+ "Make sure the ACPI subsystem is working and " \
+@@ -66,6 +67,9 @@
+ #ifdef HAVE_HAL
+ static int using_hal;
+ #endif
++#ifdef HAVE_UPOWER
++static int using_upower;
++#endif
+
+ /*
+ * What follows is a series of platform-specific apm_readinfo functions
+@@ -390,6 +394,14 @@
+ return NULL;
+ }
+
++#ifdef HAVE_UPOWER
++ if( using_upower )
++ {
++ battstat_upower_get_battery_info( status );
++ return NULL;
++ }
++#endif
++
+ #ifdef HAVE_HAL
+ if( using_hal )
+ {
+@@ -430,27 +442,36 @@
+ const char *
+ power_management_initialise (int no_hal, void (*callback) (void))
+ {
++ char *err;
++ err = g_strdup( ":(" );
+ #ifdef __linux__
+ struct stat statbuf;
+ #endif
+-#ifdef HAVE_HAL
+- char *err;
++#ifdef HAVE_UPOWER
++ err = battstat_upower_initialise (callback);
+
+- if( no_hal )
+- err = g_strdup( ":(" );
+- else
+- err = battstat_hal_initialise (callback);
+-
+-
+- if( err == NULL ) /* HAL is up */
++ if( err == NULL ) /* UPOWER is up */
+ {
+ pm_initialised = 1;
+- using_hal = TRUE;
++ using_upower = TRUE;
+ return NULL;
++ }
++#endif
++
++#ifdef HAVE_HAL
++ if(! no_hal ) {
++ err = battstat_hal_initialise (callback);
++
++ if( err == NULL ) /* HAL is up */
++ {
++ pm_initialised = 1;
++ using_hal = TRUE;
++ return NULL;
++ }
+ }
+- else
+- /* fallback to legacy methods */
+- g_free( err );
++
++ /* fallback to legacy methods */
++ g_free( err );
+ #endif
+
+ #ifdef __linux__
+@@ -498,6 +519,15 @@
+ void
+ power_management_cleanup( void )
+ {
++#ifdef HAVE_UPOWER
++ if( using_upower )
++ {
++ battstat_upower_cleanup();
++ pm_initialised = 1;
++ return;
++ }
++#endif
++
+ #ifdef HAVE_HAL
+ if( using_hal )
+ {
+@@ -525,6 +555,16 @@
+ }
+
+ int
++power_management_using_upower( void )
++{
++#ifdef HAVE_UPOWER
++ return using_upower;
++#else
++ return 0;
++#endif
++}
++
++int
+ power_management_using_hal( void )
+ {
+ #ifdef HAVE_HAL
+Index: gnome-applets-3.4.1/configure.in
+===================================================================
+--- gnome-applets-3.4.1.orig/configure.in 2012-04-15 15:45:36.000000000 +0200
++++ gnome-applets-3.4.1/configure.in 2012-04-19 00:28:17.254029051 +0200
+@@ -23,6 +23,7 @@
+ LIBWNCK_REQUIRED=2.91.0
+ LIBNOTIFY_REQUIRED=0.7
+ HAL_REQUIRED=0.5.3
++UPOWER_REQUIRED=0.9.4
+ DBUS_REQUIRED=1.1.2
+ DBUS_GLIB_REQUIRED=0.74
+ PYGOBJECT_REQUIRED=2.26
+@@ -223,6 +224,30 @@
+ AC_SUBST(HAL_CFLAGS)
+ AC_SUBST(HAL_LIBS)
+
++dnl -- check for libupower-glib (optional) --------------------------------------------
++UPOWER_CFLAGS=
++UPOWER_LIBS=
++AC_ARG_WITH(upower,[ --without-upower build without upower support])
++
++if test "x$with_upower" != xno; then
++ PKG_CHECK_MODULES(UPOWER, upower-glib >= $UPOWER_REQUIRED,
++ HAVE_UPOWER="yes",
++ HAVE_UPOWER="no")
++
++ LT_LIB_M
++ if test "x$HAVE_UPOWER" = "xyes"; then
++ AC_DEFINE(HAVE_UPOWER, 1, [UPOWER available])
++ fi
++else
++ AC_MSG_WARN(["upower support disabled"])
++fi
++
++AC_SUBST(UPOWER_CFLAGS)
++AC_SUBST(UPOWER_LIBS)
++AC_SUBST(LIBM)
++
++
++
+ dnl -- check for gucharmap (optional) -----------------------------------------
+
+ PKG_CHECK_MODULES([GUCHARMAP],[gucharmap-2.90 >= $GUCHARMAP3_REQUIRED],
+@@ -739,5 +764,6 @@
+ Using DBUS: $HAVE_DBUS
+ Using NetworkManager: $HAVE_NETWORKMANAGER
+ Using HAL: $HAVE_HAL
++ Using UPOWER: $HAVE_UPOWER
+ Enabling IPv6: $have_ipv6
+ " >&2
Modified: PKGBUILD
===================================================================
--- PKGBUILD 2013-04-10 16:08:55 UTC (rev 88045)
+++ PKGBUILD 2013-04-10 17:39:32 UTC (rev 88046)
@@ -4,22 +4,24 @@
pkgname=gnome-applets
pkgver=3.5.92
-pkgrel=2
+pkgrel=3
pkgdesc="Small applications for the GNOME panel"
arch=('i686' 'x86_64')
license=('GPL')
-depends=('cpupower' 'gucharmap' 'gstreamer0.10-base' 'gnome-panel' 'libgtop')
+depends=('cpupower' 'gucharmap' 'gstreamer0.10-base-plugins' 'gnome-panel' 'libgtop' 'upower')
makedepends=('gnome-common' 'gnome-doc-utils' 'intltool' 'networkmanager' 'rarian')
url="https://live.gnome.org/GnomeApplets"
install=$pkgname.install
source=(http://download.gnome.org/sources/$pkgname/${pkgver%.*}/$pkgname-$pkgver.tar.xz
gnome-applets-cpupower.patch
disable-gweather-applet.patch
- fix-autoconf.patch)
+ fix-autoconf.patch
+ 01_battstat_upower.patch)
sha256sums=('f6178cb702a39a4103fcb97e9a266bf6d05f05ac5064818f119c023d76170e83'
'942276d7cc18224d9f5b1b57314746ad4d713ee0dcf4aedb25fa72e92db75e65'
'47f6b477c0f76ebb1e8ffc6fe9bd2fac9ac7f511f059cf4bb2687f8425bfb4a8'
- '0acd58aee458345e378d5f77256e04b13e3a4c06b166aac390a92309b864e8a4')
+ '0acd58aee458345e378d5f77256e04b13e3a4c06b166aac390a92309b864e8a4'
+ '364c9264c76721b42e85eecc48443852ead1bd730d9de937dd2ae00889db836a')
build() {
cd "$pkgname-$pkgver"
@@ -29,14 +31,17 @@
# Use cpupower instead of cpufreq
patch -Np1 -i "$srcdir/gnome-applets-cpupower.patch"
+ # Add UPower support
+ patch -Np1 -i "$srcdir/01_battstat_upower.patch"
+
# Disable gweather applet, because it's not compatible with libgweather 3.8
patch -Np1 -i "$srcdir/disable-gweather-applet.patch"
# Fix build
patch -Np1 -i "$srcdir/fix-autoconf.patch"
- # Turn off some unneeded warnings
- CFLAGS="$CFLAGS -Wno-missing-prototypes"
+ # Turn off unneeded warnings
+ CFLAGS="$CFLAGS -w"
autoreconf -fi
./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --libexecdir=/usr/lib/$pkgname \
More information about the arch-commits
mailing list