[arch-commits] Commit in lm_sensors/repos (18 files)
Eric Bélanger
eric at nymeria.archlinux.org
Fri Mar 22 21:23:13 UTC 2013
Date: Friday, March 22, 2013 @ 22:23:13
Author: eric
Revision: 180542
archrelease: copy trunk to testing-i686, testing-x86_64
Added:
lm_sensors/repos/testing-i686/
lm_sensors/repos/testing-i686/PKGBUILD
(from rev 180541, lm_sensors/trunk/PKGBUILD)
lm_sensors/repos/testing-i686/fancontrol.service
(from rev 180541, lm_sensors/trunk/fancontrol.service)
lm_sensors/repos/testing-i686/healthd
(from rev 180541, lm_sensors/trunk/healthd)
lm_sensors/repos/testing-i686/healthd.conf
(from rev 180541, lm_sensors/trunk/healthd.conf)
lm_sensors/repos/testing-i686/healthd.service
(from rev 180541, lm_sensors/trunk/healthd.service)
lm_sensors/repos/testing-i686/linux_3.0.patch
(from rev 180541, lm_sensors/trunk/linux_3.0.patch)
lm_sensors/repos/testing-i686/lm_sensors-fancontrol.patch
(from rev 180541, lm_sensors/trunk/lm_sensors-fancontrol.patch)
lm_sensors/repos/testing-i686/sensord.service
(from rev 180541, lm_sensors/trunk/sensord.service)
lm_sensors/repos/testing-x86_64/
lm_sensors/repos/testing-x86_64/PKGBUILD
(from rev 180541, lm_sensors/trunk/PKGBUILD)
lm_sensors/repos/testing-x86_64/fancontrol.service
(from rev 180541, lm_sensors/trunk/fancontrol.service)
lm_sensors/repos/testing-x86_64/healthd
(from rev 180541, lm_sensors/trunk/healthd)
lm_sensors/repos/testing-x86_64/healthd.conf
(from rev 180541, lm_sensors/trunk/healthd.conf)
lm_sensors/repos/testing-x86_64/healthd.service
(from rev 180541, lm_sensors/trunk/healthd.service)
lm_sensors/repos/testing-x86_64/linux_3.0.patch
(from rev 180541, lm_sensors/trunk/linux_3.0.patch)
lm_sensors/repos/testing-x86_64/lm_sensors-fancontrol.patch
(from rev 180541, lm_sensors/trunk/lm_sensors-fancontrol.patch)
lm_sensors/repos/testing-x86_64/sensord.service
(from rev 180541, lm_sensors/trunk/sensord.service)
--------------------------------------------+
testing-i686/PKGBUILD | 49 ++++++++++++++++++++++++
testing-i686/fancontrol.service | 9 ++++
testing-i686/healthd | 53 +++++++++++++++++++++++++++
testing-i686/healthd.conf | 17 ++++++++
testing-i686/healthd.service | 9 ++++
testing-i686/linux_3.0.patch | 11 +++++
testing-i686/lm_sensors-fancontrol.patch | 29 ++++++++++++++
testing-i686/sensord.service | 9 ++++
testing-x86_64/PKGBUILD | 49 ++++++++++++++++++++++++
testing-x86_64/fancontrol.service | 9 ++++
testing-x86_64/healthd | 53 +++++++++++++++++++++++++++
testing-x86_64/healthd.conf | 17 ++++++++
testing-x86_64/healthd.service | 9 ++++
testing-x86_64/linux_3.0.patch | 11 +++++
testing-x86_64/lm_sensors-fancontrol.patch | 29 ++++++++++++++
testing-x86_64/sensord.service | 9 ++++
16 files changed, 372 insertions(+)
Copied: lm_sensors/repos/testing-i686/PKGBUILD (from rev 180541, lm_sensors/trunk/PKGBUILD)
===================================================================
--- testing-i686/PKGBUILD (rev 0)
+++ testing-i686/PKGBUILD 2013-03-22 21:23:13 UTC (rev 180542)
@@ -0,0 +1,49 @@
+# $Id$
+# Maintainer: Eric Bélanger <eric at archlinux.org>
+
+pkgname=lm_sensors
+pkgver=3.3.3
+pkgrel=2
+pkgdesc="Collection of user space tools for general SMBus access and hardware monitoring"
+arch=('i686' 'x86_64')
+url="http://www.lm-sensors.org/"
+license=('GPL' 'LGPL')
+depends=('perl' 'sysfsutils')
+makedepends=('rrdtool')
+optdepends=('rrdtool: for logging with sensord')
+backup=('etc/sensors3.conf' 'etc/healthd.conf')
+options=('!emptydirs')
+source=(http://dl.lm-sensors.org/lm-sensors/releases/lm_sensors-${pkgver}.tar.bz2{,.sig} \
+ healthd healthd.conf fancontrol.service sensord.service healthd.service \
+ linux_3.0.patch lm_sensors-fancontrol.patch)
+sha1sums=('b55c06f425993e42f13553f204066c446da36fd3'
+ '035a721f20e4ad568f4fdde2d7c25d906c192458'
+ 'afaad558d2ad4732aa53b69afa23ccf37bc67ab1'
+ '6c4e8a2d89dd2fd3ca2f0f4f3b1230111e01b0fc'
+ '7a4a4d1442aeeba0ba8aefb742a3ef187b593f4c'
+ 'eff43b4882d25dae7dd0b33eb2e33b0836a5cc51'
+ 'a7a20eb3c799d70287e6c7968a7ab42165925293'
+ '5662828085cdd981f0dc7cf8f79d3d6e2b72f50c'
+ 'd3e419b4019451fb039ae3d3b8e0ec55121b9f17')
+
+build() {
+ cd "${srcdir}/${pkgname}-${pkgver}"
+ sed -i 's|/etc/sysconfig|/etc/conf.d|' prog/{detect/sensors-detect,init/lm_sensors.service}
+ sed -i 's@\(/bin/systemctl\|/lib/systemd/system\)@/usr\1 at g' prog/detect/sensors-detect
+ sed -i 's/EnvironmentFile=/EnvironmentFile=-/' prog/init/lm_sensors.service
+ patch -p0 -i "${srcdir}/linux_3.0.patch"
+ patch -p0 -i "${srcdir}/lm_sensors-fancontrol.patch"
+ make PREFIX=/usr
+}
+
+package() {
+ cd "${srcdir}/${pkgname}-${pkgver}"
+ make PROG_EXTRA=sensord BUILD_STATIC_LIB=0 \
+ PREFIX=/usr MANDIR=/usr/share/man DESTDIR="${pkgdir}" install
+ install -D -m644 prog/init/lm_sensors.service "${pkgdir}/usr/lib/systemd/system/lm_sensors.service"
+ install -D -m755 "${srcdir}/healthd" "${pkgdir}/usr/sbin/healthd"
+ install -D -m644 "${srcdir}/healthd.conf" "${pkgdir}/etc/healthd.conf"
+ install -D -m644 "${srcdir}/fancontrol.service" "${pkgdir}/usr/lib/systemd/system/fancontrol.service"
+ install -D -m644 "${srcdir}/sensord.service" "${pkgdir}/usr/lib/systemd/system/sensord.service"
+ install -D -m644 "${srcdir}/healthd.service" "${pkgdir}/usr/lib/systemd/system/healthd.service"
+}
Copied: lm_sensors/repos/testing-i686/fancontrol.service (from rev 180541, lm_sensors/trunk/fancontrol.service)
===================================================================
--- testing-i686/fancontrol.service (rev 0)
+++ testing-i686/fancontrol.service 2013-03-22 21:23:13 UTC (rev 180542)
@@ -0,0 +1,9 @@
+[Unit]
+Description=Fan control daemon
+
+[Service]
+PIDFile=/var/run/fancontrol.pid
+ExecStart=/usr/sbin/fancontrol
+
+[Install]
+WantedBy=multi-user.target
Copied: lm_sensors/repos/testing-i686/healthd (from rev 180541, lm_sensors/trunk/healthd)
===================================================================
--- testing-i686/healthd (rev 0)
+++ testing-i686/healthd 2013-03-22 21:23:13 UTC (rev 180542)
@@ -0,0 +1,53 @@
+#!/bin/bash
+
+#
+# /usr/sbin/healthd
+#
+
+. /etc/healthd.conf
+
+cmd="${ALARM_CMD}"
+addr="${ADMIN_EMAIL}"
+slp="${ALARM_SLEEP}"
+sensors="/usr/bin/sensors"
+
+
+while [ $# -gt 0 ] ; do
+ case "${1}" in
+ -c ) cmd="${2}" ; shift 2 ;;
+ -m ) addr="${2}" ; shift 2 ;;
+ -s ) slp="${2}" ; shift 2 ;;
+ * ) shift 1 ;;
+ esac
+done
+
+case "${ALARM_RESET}" in
+ yes) /usr/bin/sensors > /dev/null
+ ;;
+ no) true
+ ;;
+esac
+
+[ -n "${cmd}" ] && [ -n "$( which -- "${cmd%% *}" )" ] || \
+ [ -n "${addr}" ] || exit 1
+
+[ "${slp}" -ge 2 ] || slp=600
+
+while true ; do
+ sleep 15
+ message="$( $sensors )"
+ case "$message" in
+ '' ) message='Could not get any sensor values !' ;;
+ *ALARM* ) : ;;
+ * ) message='' ;;
+ esac
+ if [ -n "$message" ]; then
+ if [ -n "${addr}" ]; then
+ echo "$message" | mail -s \
+ "Sensors ALARM detected at host: $( hostname )" \
+ "${addr}"
+ fi
+ [ -z "${cmd}" ] || ${cmd} &
+ sleep ${slp}
+ fi
+done &
Copied: lm_sensors/repos/testing-i686/healthd.conf (from rev 180541, lm_sensors/trunk/healthd.conf)
===================================================================
--- testing-i686/healthd.conf (rev 0)
+++ testing-i686/healthd.conf 2013-03-22 21:23:13 UTC (rev 180542)
@@ -0,0 +1,17 @@
+#
+# /etc/conf.d/healthd
+#
+
+# reset any pending alarms on startup
+ALARM_RESET="yes"
+
+# where to sent mails on alarm
+ADMIN_EMAIL="root"
+
+# Seconds to sleep when alarm detected before checking again
+# If you want to fill up your mail inbox set this to 2. ;-)
+ALARM_SLEEP=600
+
+# command to run in background on each alarm
+# N.B.: If you choose to use the beep command, you'll need to install it: pacman -S beep
+ALARM_CMD="beep -f 800 -l 500 -d 500 -r 600"
Copied: lm_sensors/repos/testing-i686/healthd.service (from rev 180541, lm_sensors/trunk/healthd.service)
===================================================================
--- testing-i686/healthd.service (rev 0)
+++ testing-i686/healthd.service 2013-03-22 21:23:13 UTC (rev 180542)
@@ -0,0 +1,9 @@
+[Unit]
+Description=A daemon which can be used to alert you in the event of a hardware health monitoring alarm
+
+[Service]
+Type=forking
+ExecStart=/usr/sbin/healthd
+
+[Install]
+WantedBy=multi-user.target
Copied: lm_sensors/repos/testing-i686/linux_3.0.patch (from rev 180541, lm_sensors/trunk/linux_3.0.patch)
===================================================================
--- testing-i686/linux_3.0.patch (rev 0)
+++ testing-i686/linux_3.0.patch 2013-03-22 21:23:13 UTC (rev 180542)
@@ -0,0 +1,11 @@
+--- prog/detect/sensors-detect 2011-08-02 10:23:46.000000000 +0200
++++ prog/detect/sensors-detect 2011-08-02 10:24:04.000000000 +0200
+@@ -2472,7 +2472,7 @@
+
+ sub initialize_kernel_version
+ {
+- `uname -r` =~ /(\d+)\.(\d+)\.(\d+)(.*)/;
++ `uname -r` =~ /(\d+)\.(\d+)(.*)/;
+ @kernel_version = ($1, $2, $3, $4);
+ chomp($kernel_arch = `uname -m`);
+
Copied: lm_sensors/repos/testing-i686/lm_sensors-fancontrol.patch (from rev 180541, lm_sensors/trunk/lm_sensors-fancontrol.patch)
===================================================================
--- testing-i686/lm_sensors-fancontrol.patch (rev 0)
+++ testing-i686/lm_sensors-fancontrol.patch 2013-03-22 21:23:13 UTC (rev 180542)
@@ -0,0 +1,29 @@
+--- prog/pwm/fancontrol 2012-11-07 03:26:37.000000000 +0200
++++ prog/pwm/fancontrol 2013-03-22 18:15:00.566696011 +0200
+@@ -297,7 +297,7 @@
+ cd $DIR
+
+ # Check for configuration change
+-if [ -z "$DEVPATH" -o -z "$DEVNAME" ]
++if [ -z "$DEVPATH" ] || [ -z "$DEVNAME" ]
+ then
+ echo "Configuration is too old, please run pwmconfig again" >&2
+ exit 1
+@@ -337,7 +337,7 @@
+ # It didn't work, try pwmN_enable=1 pwmN=255
+ echo 1 > $ENABLE 2> /dev/null
+ echo $MAX > $1
+- if [ `cat $ENABLE` -eq 1 -a `cat $1` -ge 190 ]
++ if [ `cat $ENABLE` -eq 1 ] && [ `cat $1` -ge 190 ]
+ then
+ # Success
+ return 0
+@@ -469,7 +469,7 @@
+ else
+ # calculate the new value from temperature and settings
+ pwmval="(${tval}-${mint})*(${maxpwm}-${minso})/(${maxt}-${mint})+${minso}"
+- if [ $pwmpval -eq 0 -o $min_fanval -eq 0 ]
++ if [ $pwmpval -eq 0 ] || [ $min_fanval -eq 0 ]
+ then # if fan was stopped start it using a safe value
+ echo $minsa > $pwmo
+ # Sleep while still handling signals
Copied: lm_sensors/repos/testing-i686/sensord.service (from rev 180541, lm_sensors/trunk/sensord.service)
===================================================================
--- testing-i686/sensord.service (rev 0)
+++ testing-i686/sensord.service 2013-03-22 21:23:13 UTC (rev 180542)
@@ -0,0 +1,9 @@
+[Unit]
+Description=Sensor information logging daemon
+
+[Service]
+PIDFile=/var/run/sensord.pid
+ExecStart=/usr/sbin/sensord
+
+[Install]
+WantedBy=multi-user.target
Copied: lm_sensors/repos/testing-x86_64/PKGBUILD (from rev 180541, lm_sensors/trunk/PKGBUILD)
===================================================================
--- testing-x86_64/PKGBUILD (rev 0)
+++ testing-x86_64/PKGBUILD 2013-03-22 21:23:13 UTC (rev 180542)
@@ -0,0 +1,49 @@
+# $Id$
+# Maintainer: Eric Bélanger <eric at archlinux.org>
+
+pkgname=lm_sensors
+pkgver=3.3.3
+pkgrel=2
+pkgdesc="Collection of user space tools for general SMBus access and hardware monitoring"
+arch=('i686' 'x86_64')
+url="http://www.lm-sensors.org/"
+license=('GPL' 'LGPL')
+depends=('perl' 'sysfsutils')
+makedepends=('rrdtool')
+optdepends=('rrdtool: for logging with sensord')
+backup=('etc/sensors3.conf' 'etc/healthd.conf')
+options=('!emptydirs')
+source=(http://dl.lm-sensors.org/lm-sensors/releases/lm_sensors-${pkgver}.tar.bz2{,.sig} \
+ healthd healthd.conf fancontrol.service sensord.service healthd.service \
+ linux_3.0.patch lm_sensors-fancontrol.patch)
+sha1sums=('b55c06f425993e42f13553f204066c446da36fd3'
+ '035a721f20e4ad568f4fdde2d7c25d906c192458'
+ 'afaad558d2ad4732aa53b69afa23ccf37bc67ab1'
+ '6c4e8a2d89dd2fd3ca2f0f4f3b1230111e01b0fc'
+ '7a4a4d1442aeeba0ba8aefb742a3ef187b593f4c'
+ 'eff43b4882d25dae7dd0b33eb2e33b0836a5cc51'
+ 'a7a20eb3c799d70287e6c7968a7ab42165925293'
+ '5662828085cdd981f0dc7cf8f79d3d6e2b72f50c'
+ 'd3e419b4019451fb039ae3d3b8e0ec55121b9f17')
+
+build() {
+ cd "${srcdir}/${pkgname}-${pkgver}"
+ sed -i 's|/etc/sysconfig|/etc/conf.d|' prog/{detect/sensors-detect,init/lm_sensors.service}
+ sed -i 's@\(/bin/systemctl\|/lib/systemd/system\)@/usr\1 at g' prog/detect/sensors-detect
+ sed -i 's/EnvironmentFile=/EnvironmentFile=-/' prog/init/lm_sensors.service
+ patch -p0 -i "${srcdir}/linux_3.0.patch"
+ patch -p0 -i "${srcdir}/lm_sensors-fancontrol.patch"
+ make PREFIX=/usr
+}
+
+package() {
+ cd "${srcdir}/${pkgname}-${pkgver}"
+ make PROG_EXTRA=sensord BUILD_STATIC_LIB=0 \
+ PREFIX=/usr MANDIR=/usr/share/man DESTDIR="${pkgdir}" install
+ install -D -m644 prog/init/lm_sensors.service "${pkgdir}/usr/lib/systemd/system/lm_sensors.service"
+ install -D -m755 "${srcdir}/healthd" "${pkgdir}/usr/sbin/healthd"
+ install -D -m644 "${srcdir}/healthd.conf" "${pkgdir}/etc/healthd.conf"
+ install -D -m644 "${srcdir}/fancontrol.service" "${pkgdir}/usr/lib/systemd/system/fancontrol.service"
+ install -D -m644 "${srcdir}/sensord.service" "${pkgdir}/usr/lib/systemd/system/sensord.service"
+ install -D -m644 "${srcdir}/healthd.service" "${pkgdir}/usr/lib/systemd/system/healthd.service"
+}
Copied: lm_sensors/repos/testing-x86_64/fancontrol.service (from rev 180541, lm_sensors/trunk/fancontrol.service)
===================================================================
--- testing-x86_64/fancontrol.service (rev 0)
+++ testing-x86_64/fancontrol.service 2013-03-22 21:23:13 UTC (rev 180542)
@@ -0,0 +1,9 @@
+[Unit]
+Description=Fan control daemon
+
+[Service]
+PIDFile=/var/run/fancontrol.pid
+ExecStart=/usr/sbin/fancontrol
+
+[Install]
+WantedBy=multi-user.target
Copied: lm_sensors/repos/testing-x86_64/healthd (from rev 180541, lm_sensors/trunk/healthd)
===================================================================
--- testing-x86_64/healthd (rev 0)
+++ testing-x86_64/healthd 2013-03-22 21:23:13 UTC (rev 180542)
@@ -0,0 +1,53 @@
+#!/bin/bash
+
+#
+# /usr/sbin/healthd
+#
+
+. /etc/healthd.conf
+
+cmd="${ALARM_CMD}"
+addr="${ADMIN_EMAIL}"
+slp="${ALARM_SLEEP}"
+sensors="/usr/bin/sensors"
+
+
+while [ $# -gt 0 ] ; do
+ case "${1}" in
+ -c ) cmd="${2}" ; shift 2 ;;
+ -m ) addr="${2}" ; shift 2 ;;
+ -s ) slp="${2}" ; shift 2 ;;
+ * ) shift 1 ;;
+ esac
+done
+
+case "${ALARM_RESET}" in
+ yes) /usr/bin/sensors > /dev/null
+ ;;
+ no) true
+ ;;
+esac
+
+[ -n "${cmd}" ] && [ -n "$( which -- "${cmd%% *}" )" ] || \
+ [ -n "${addr}" ] || exit 1
+
+[ "${slp}" -ge 2 ] || slp=600
+
+while true ; do
+ sleep 15
+ message="$( $sensors )"
+ case "$message" in
+ '' ) message='Could not get any sensor values !' ;;
+ *ALARM* ) : ;;
+ * ) message='' ;;
+ esac
+ if [ -n "$message" ]; then
+ if [ -n "${addr}" ]; then
+ echo "$message" | mail -s \
+ "Sensors ALARM detected at host: $( hostname )" \
+ "${addr}"
+ fi
+ [ -z "${cmd}" ] || ${cmd} &
+ sleep ${slp}
+ fi
+done &
Copied: lm_sensors/repos/testing-x86_64/healthd.conf (from rev 180541, lm_sensors/trunk/healthd.conf)
===================================================================
--- testing-x86_64/healthd.conf (rev 0)
+++ testing-x86_64/healthd.conf 2013-03-22 21:23:13 UTC (rev 180542)
@@ -0,0 +1,17 @@
+#
+# /etc/conf.d/healthd
+#
+
+# reset any pending alarms on startup
+ALARM_RESET="yes"
+
+# where to sent mails on alarm
+ADMIN_EMAIL="root"
+
+# Seconds to sleep when alarm detected before checking again
+# If you want to fill up your mail inbox set this to 2. ;-)
+ALARM_SLEEP=600
+
+# command to run in background on each alarm
+# N.B.: If you choose to use the beep command, you'll need to install it: pacman -S beep
+ALARM_CMD="beep -f 800 -l 500 -d 500 -r 600"
Copied: lm_sensors/repos/testing-x86_64/healthd.service (from rev 180541, lm_sensors/trunk/healthd.service)
===================================================================
--- testing-x86_64/healthd.service (rev 0)
+++ testing-x86_64/healthd.service 2013-03-22 21:23:13 UTC (rev 180542)
@@ -0,0 +1,9 @@
+[Unit]
+Description=A daemon which can be used to alert you in the event of a hardware health monitoring alarm
+
+[Service]
+Type=forking
+ExecStart=/usr/sbin/healthd
+
+[Install]
+WantedBy=multi-user.target
Copied: lm_sensors/repos/testing-x86_64/linux_3.0.patch (from rev 180541, lm_sensors/trunk/linux_3.0.patch)
===================================================================
--- testing-x86_64/linux_3.0.patch (rev 0)
+++ testing-x86_64/linux_3.0.patch 2013-03-22 21:23:13 UTC (rev 180542)
@@ -0,0 +1,11 @@
+--- prog/detect/sensors-detect 2011-08-02 10:23:46.000000000 +0200
++++ prog/detect/sensors-detect 2011-08-02 10:24:04.000000000 +0200
+@@ -2472,7 +2472,7 @@
+
+ sub initialize_kernel_version
+ {
+- `uname -r` =~ /(\d+)\.(\d+)\.(\d+)(.*)/;
++ `uname -r` =~ /(\d+)\.(\d+)(.*)/;
+ @kernel_version = ($1, $2, $3, $4);
+ chomp($kernel_arch = `uname -m`);
+
Copied: lm_sensors/repos/testing-x86_64/lm_sensors-fancontrol.patch (from rev 180541, lm_sensors/trunk/lm_sensors-fancontrol.patch)
===================================================================
--- testing-x86_64/lm_sensors-fancontrol.patch (rev 0)
+++ testing-x86_64/lm_sensors-fancontrol.patch 2013-03-22 21:23:13 UTC (rev 180542)
@@ -0,0 +1,29 @@
+--- prog/pwm/fancontrol 2012-11-07 03:26:37.000000000 +0200
++++ prog/pwm/fancontrol 2013-03-22 18:15:00.566696011 +0200
+@@ -297,7 +297,7 @@
+ cd $DIR
+
+ # Check for configuration change
+-if [ -z "$DEVPATH" -o -z "$DEVNAME" ]
++if [ -z "$DEVPATH" ] || [ -z "$DEVNAME" ]
+ then
+ echo "Configuration is too old, please run pwmconfig again" >&2
+ exit 1
+@@ -337,7 +337,7 @@
+ # It didn't work, try pwmN_enable=1 pwmN=255
+ echo 1 > $ENABLE 2> /dev/null
+ echo $MAX > $1
+- if [ `cat $ENABLE` -eq 1 -a `cat $1` -ge 190 ]
++ if [ `cat $ENABLE` -eq 1 ] && [ `cat $1` -ge 190 ]
+ then
+ # Success
+ return 0
+@@ -469,7 +469,7 @@
+ else
+ # calculate the new value from temperature and settings
+ pwmval="(${tval}-${mint})*(${maxpwm}-${minso})/(${maxt}-${mint})+${minso}"
+- if [ $pwmpval -eq 0 -o $min_fanval -eq 0 ]
++ if [ $pwmpval -eq 0 ] || [ $min_fanval -eq 0 ]
+ then # if fan was stopped start it using a safe value
+ echo $minsa > $pwmo
+ # Sleep while still handling signals
Copied: lm_sensors/repos/testing-x86_64/sensord.service (from rev 180541, lm_sensors/trunk/sensord.service)
===================================================================
--- testing-x86_64/sensord.service (rev 0)
+++ testing-x86_64/sensord.service 2013-03-22 21:23:13 UTC (rev 180542)
@@ -0,0 +1,9 @@
+[Unit]
+Description=Sensor information logging daemon
+
+[Service]
+PIDFile=/var/run/sensord.pid
+ExecStart=/usr/sbin/sensord
+
+[Install]
+WantedBy=multi-user.target
More information about the arch-commits
mailing list