[arch-commits] Commit in mksyslinux/repos/extra-any (10 files)
Tobias Powalowski
tpowa at nymeria.archlinux.org
Sat May 18 06:51:48 UTC 2013
Date: Saturday, May 18, 2013 @ 08:51:48
Author: tpowa
Revision: 185738
archrelease: copy trunk to extra-any
Added:
mksyslinux/repos/extra-any/PKGBUILD
(from rev 185737, mksyslinux/trunk/PKGBUILD)
mksyslinux/repos/extra-any/boot.msg
(from rev 185737, mksyslinux/trunk/boot.msg)
mksyslinux/repos/extra-any/mksyslinux
(from rev 185737, mksyslinux/trunk/mksyslinux)
mksyslinux/repos/extra-any/mksyslinux.conf
(from rev 185737, mksyslinux/trunk/mksyslinux.conf)
mksyslinux/repos/extra-any/options.msg
(from rev 185737, mksyslinux/trunk/options.msg)
Deleted:
mksyslinux/repos/extra-any/PKGBUILD
mksyslinux/repos/extra-any/boot.msg
mksyslinux/repos/extra-any/mksyslinux
mksyslinux/repos/extra-any/mksyslinux.conf
mksyslinux/repos/extra-any/options.msg
-----------------+
PKGBUILD | 52 ++++-----
boot.msg | 28 ++---
mksyslinux | 288 +++++++++++++++++++++++++++---------------------------
mksyslinux.conf | 66 ++++++------
options.msg | 12 +-
5 files changed, 223 insertions(+), 223 deletions(-)
Deleted: PKGBUILD
===================================================================
--- PKGBUILD 2013-05-18 06:51:41 UTC (rev 185737)
+++ PKGBUILD 2013-05-18 06:51:48 UTC (rev 185738)
@@ -1,26 +0,0 @@
-# $Id$
-# Maintainer : Tobias Powalowski <tpowa at archlinux.org>
-
-pkgname=mksyslinux
-pkgver=2013.03
-pkgrel=1
-pkgdesc="Advanced, modular syslinux boot image creation utility"
-arch=(any)
-license=('GPL')
-url="http://www.archlinux.org/"
-depends=('mkinitcpio' 'syslinux' 'pciutils')
-backup=(etc/mksyslinux.conf)
-source=('boot.msg' 'mksyslinux' 'mksyslinux.conf' 'options.msg')
-md5sums=('6a269fc5b58c7bcc6688efeaa2075606'
- 'cc85beaf16111b9509c52f1b360eee6f'
- '0e71d0e137ccbce67a96910278a59a40'
- 'b211c5f7e30d2ee36cde20f71aa3f2b8')
-
-package()
-{
- cd "$srcdir/"
- install -D -m755 mksyslinux "$pkgdir/usr/sbin/mksyslinux"
- install -D -m644 mksyslinux.conf "$pkgdir/etc/mksyslinux.conf"
- install -D -m644 boot.msg "$pkgdir/usr/share/mksyslinux/boot.msg"
- install -D -m644 options.msg "$pkgdir/usr/share/mksyslinux/options.msg"
-}
Copied: mksyslinux/repos/extra-any/PKGBUILD (from rev 185737, mksyslinux/trunk/PKGBUILD)
===================================================================
--- PKGBUILD (rev 0)
+++ PKGBUILD 2013-05-18 06:51:48 UTC (rev 185738)
@@ -0,0 +1,26 @@
+# $Id$
+# Maintainer : Tobias Powalowski <tpowa at archlinux.org>
+
+pkgname=mksyslinux
+pkgver=2013.03
+pkgrel=2
+pkgdesc="Advanced, modular syslinux boot image creation utility"
+arch=(any)
+license=('GPL')
+url="http://www.archlinux.org/"
+depends=('mkinitcpio' 'syslinux' 'pciutils')
+backup=(etc/mksyslinux.conf)
+source=('boot.msg' 'mksyslinux' 'mksyslinux.conf' 'options.msg')
+md5sums=('6a269fc5b58c7bcc6688efeaa2075606'
+ 'cc85beaf16111b9509c52f1b360eee6f'
+ '0e71d0e137ccbce67a96910278a59a40'
+ 'b211c5f7e30d2ee36cde20f71aa3f2b8')
+
+package()
+{
+ cd "$srcdir/"
+ install -D -m755 mksyslinux "$pkgdir/usr/bin/mksyslinux"
+ install -D -m644 mksyslinux.conf "$pkgdir/etc/mksyslinux.conf"
+ install -D -m644 boot.msg "$pkgdir/usr/share/mksyslinux/boot.msg"
+ install -D -m644 options.msg "$pkgdir/usr/share/mksyslinux/options.msg"
+}
Deleted: boot.msg
===================================================================
--- boot.msg 2013-05-18 06:51:41 UTC (rev 185737)
+++ boot.msg 2013-05-18 06:51:48 UTC (rev 185738)
@@ -1,14 +0,0 @@
-
-
-------------------------------------------------------------------------------
-Arch Linux
-SYSLINUX BOOT
-created with 'mksyslinux' by Tobias Powalowski <tpowa at archlinux.org>
-
-Press ENTER or type 'arch' to boot image.
-
-If you wish to change your defaults to boot into your existing system,
-type 'vmlinuz initrd=initrd.img <any_other_boot_option>'
-Use the F2 key for troubleshooting and options.
-------------------------------------------------------------------------------
-
Copied: mksyslinux/repos/extra-any/boot.msg (from rev 185737, mksyslinux/trunk/boot.msg)
===================================================================
--- boot.msg (rev 0)
+++ boot.msg 2013-05-18 06:51:48 UTC (rev 185738)
@@ -0,0 +1,14 @@
+
+
+------------------------------------------------------------------------------
+Arch Linux
+SYSLINUX BOOT
+created with 'mksyslinux' by Tobias Powalowski <tpowa at archlinux.org>
+
+Press ENTER or type 'arch' to boot image.
+
+If you wish to change your defaults to boot into your existing system,
+type 'vmlinuz initrd=initrd.img <any_other_boot_option>'
+Use the F2 key for troubleshooting and options.
+------------------------------------------------------------------------------
+
Deleted: mksyslinux
===================================================================
--- mksyslinux 2013-05-18 06:51:41 UTC (rev 185737)
+++ mksyslinux 2013-05-18 06:51:48 UTC (rev 185738)
@@ -1,144 +0,0 @@
-#! /bin/sh
-# Created by Tobias Powalowski <tpowa at archlinux.org>
-# Settings
-APPNAME=$(basename "${0}")
-CONFIG="/etc/mksyslinux.conf"
-export TEMPDIR=$(mktemp /tmp/mksyslinux.XXX)
-TMPDIR=$(mktemp -d /tmp/mksyslinux-image.XXX)
-BOOTDIRNAME=boot/syslinux
-
-usage ()
-{
- echo "${APPNAME}: usage"
- echo "WRITING TO DEVICE:"
- echo "- PREPARATION: Your device must have a bootable first partition in FAT16 format!"
- echo "- ATTENTION: The MBR of your DEVICE will be overwritten! You have been warned!"
- echo ""
- echo "CREATING AN IMAGE FILE:"
- echo "- For creating an image file use the -i=IMAGEFILE switch"
- echo "- use 'dd if=<yourimage> of=<yourdevice>' to write to your device afterwards."
- echo ""
- echo "PARAMETERS:"
- echo " -d=DEVICE Your DEVICE first partition from /dev/xxx tree to install"
- echo " -i=IMAGENAME Your IMAGENAME"
- echo " -c=CONFIG Use CONFIG file. default: /etc/mksyslinux.conf"
- echo " -h This message."
- exit 1
-}
-
-[ "$1" == "" ] && usage && exit 1
-
-
-while [ $# -gt 0 ]; do
- case $1 in
- -c=*|--c=*) CONFIG="$(echo $1 | awk -F= '{print $2;}')" ;;
- -d=*|--d=*) DEVICE="$(echo $1 | awk -F= '{print $2;}')" ;;
- -i=*|--i=*) IMAGENAME="$(echo $1 | awk -F= '{print $2;}')" ;;
- -h|--h|?) usage ;;
- *) usage ;;
- esac
- shift
-done
-
-if [ ! -f "${CONFIG}" ]; then
- echo "config file '${CONFIG}' cannot be found, aborting..."
- exit 1
-fi
-
-if [ "${IMAGENAME}" = "" ]; then
- if [ "${DEVICE}" = "" ]; then
- echo "ERROR: No DEVICE name specified, please use the -d option"
- exit 1
- fi
-fi
-
-if ! [ $UID -eq 0 ]; then
- echo "ERROR: only works when run as root!"
- exit 1
-fi
-
-. "${CONFIG}"
-# export for mkinitcpio
-[ -n "${APPENDBOOTMESSAGE}" ] && export APPENDBOOTMESSAGE
-[ -n "${APPENDBOOTMESSAGE_SYSLINUX}" ] && export APPENDBOOTMESSAGE_SYSLINUX
-[ -n "${APPENDOPTIONSBOOTMESSAGE}" ] && export APPENDOPTIONSBOOTMESSAGE
-
-MBRDEVICE="$(echo ${DEVICE} | sed -e 's/[0-9]//g')"
-
-export RUNPROGRAM="${APPNAME}"
-[ "${BOOTMESSAGE}" = "" ] && export BOOTMESSAGE=$(mktemp /tmp/bootmessage.XXXX)
-[ "${OPTIONSBOOTMESSAGE}" = "" ] && export OPTIONSBOOTMESSAGE=$(mktemp /tmp/optionsbootmessage.XXXX)
-export USEKERNEL=${VERSION}
-# begin script
-[ -e ${TEMPDIR} ] && rm -r ${TEMPDIR}
-mkdir -p ${TEMPDIR}/$BOOTDIRNAME
-echo ":: Mounting ${DEVICE} ..."
-if ! [ "${IMAGENAME}" = "" ]; then
- modprobe loop
-else
- mount ${DEVICE} ${TEMPDIR} || exit 1
-fi
-# prepare syslinux bootloader
-install -m755 /usr/lib/syslinux/isolinux.bin ${TEMPDIR}/${BOOTDIRNAME}/isolinux.bin
-for i in /usr/lib/syslinux/*.c32; do
- install -m644 $i ${TEMPDIR}/${BOOTDIRNAME}/$(basename $i)
-done
-install -m644 /lib/modules/$(uname -r)/modules.pcimap ${TEMPDIR}/${BOOTDIRNAME}/modules.pcimap
-install -m644 /usr/share/hwdata/pci.ids ${TEMPDIR}/${BOOTDIRNAME}/pci.ids
-
-# create syslinux.cfg
-echo ":: Creating syslinux.cfg ..."
-if [ "${SYSLINUXCFG}" = "" ]; then
- [ -e ${TEMPDIR}/${BOOTDIRNAME}/syslinux.cfg ] && rm ${TEMPDIR}/${BOOTDIRNAME}/syslinux.cfg
- echo "prompt ${PROMPT}" >> ${TEMPDIR}/${BOOTDIRNAME}/syslinux.cfg
- echo "timeout ${TIMEOUT}" >> ${TEMPDIR}/${BOOTDIRNAME}/syslinux.cfg
- echo "display boot.msg" >> ${TEMPDIR}/${BOOTDIRNAME}/syslinux.cfg
- echo "F1 boot.msg" >> ${TEMPDIR}/${BOOTDIRNAME}/syslinux.cfg
- echo "F2 options.msg" >> ${TEMPDIR}/${BOOTDIRNAME}/syslinux.cfg
- echo "default arch" >> ${TEMPDIR}/${BOOTDIRNAME}/syslinux.cfg
- echo "label arch" >> ${TEMPDIR}/${BOOTDIRNAME}/syslinux.cfg
- echo "kernel /boot/vmlinuz" >> ${TEMPDIR}/${BOOTDIRNAME}/syslinux.cfg
- echo "append initrd=/boot/initrd.img ${KERNEL_BOOT_OPTIONS}" >> ${TEMPDIR}/${BOOTDIRNAME}/syslinux.cfg
-else
- sed "s|@@PROMPT@@|${PROMPT}|g;s|@@TIMEOUT@@|${TIMEOUT}|g;s|@@KERNEL_BOOT_OPTIONS@@|${KERNEL_BOOT_OPTIONS}|g" \
- ${SYSLINUXCFG} > ${TEMPDIR}/${BOOTDIRNAME}/syslinux.cfg
-fi
-[ ! -s ${TEMPDIR}/syslinux.cfg ] && echo "No syslinux.cfg found" && exit 1
-echo ":: Calling mkinitcpio CONFIG=${MKINITCPIO_CONFIG} KERNEL=${VERSION} ..."
-# generate initramdisk
-echo ":: Creating initramdisk ..."
- mkinitcpio -c ${MKINITCPIO_CONFIG} -k ${VERSION} -g ${TEMPDIR}/boot/initrd.img
-echo ":: Using ${KERNEL} as image kernel ..."
- install -m644 ${KERNEL} ${TEMPDIR}/boot/vmlinuz
- install -m644 ${BOOTMESSAGE} ${TEMPDIR}/${BOOTDIRNAME}/boot.msg
- install -m644 ${OPTIONSBOOTMESSAGE} ${TEMPDIR}/${BOOTDIRNAME}/options.msg
- [ ! -s ${TEMPDIR}/${BOOTDIRNAME}/boot.msg ] && echo 'ERROR:no boot.msg found, aborting!' && exit 1
- [ ! -s ${TEMPDIR}/${BOOTDIRNAME}/options.msg ] && echo 'ERROR:no options.msg found, aborting!' && exit 1
-if ! [ "${IMAGENAME}" = "" ]; then
- # ext2 overhead's upper bound is 6%
- # empirically tested up to 1GB
- rootsize=$(du -bs ${TEMPDIR}|cut -f1)
- IMGSZ=$(( (${rootsize}*106)/100/512 + 1)) # image size in sectors
- # create the filesystem image file
- dd if=/dev/zero of="${IMAGENAME}" bs=512 count="${IMGSZ}"
- # create a filesystem on the image
- mkfs.vfat "${IMAGENAME}"
- mount -o loop ${IMAGENAME} ${TMPDIR} || exit 1
- cp -r "${TEMPDIR}"/* "$TMPDIR"
- umount ${TMPDIR}
-else
- echo ":: Unmounting ${DEVICE} ..."
- umount ${TEMPDIR} || exit 1
-fi
-if ! [ "${IMAGENAME}" = "" ]; then
- echo ":: Installing SYSLINUX on ${IMAGENAME} ..."
- syslinux ${IMAGENAME} && echo "Installation completed."
-else
- echo ":: Installing MBR on ${MBRDEVICE} ..."
- cat ${MBR} > ${MBRDEVICE}
- echo ":: Installing SYSLINUX on ${DEVICE} ..."
- syslinux -o offset ${DEVICE} && echo "Installation completed."
-fi
-# clean /tmp
-rm -r ${TEMPDIR}
-! [ ${IMAGENAME} = "" ] && rm -r ${TMPDIR}
\ No newline at end of file
Copied: mksyslinux/repos/extra-any/mksyslinux (from rev 185737, mksyslinux/trunk/mksyslinux)
===================================================================
--- mksyslinux (rev 0)
+++ mksyslinux 2013-05-18 06:51:48 UTC (rev 185738)
@@ -0,0 +1,144 @@
+#! /bin/sh
+# Created by Tobias Powalowski <tpowa at archlinux.org>
+# Settings
+APPNAME=$(basename "${0}")
+CONFIG="/etc/mksyslinux.conf"
+export TEMPDIR=$(mktemp /tmp/mksyslinux.XXX)
+TMPDIR=$(mktemp -d /tmp/mksyslinux-image.XXX)
+BOOTDIRNAME=boot/syslinux
+
+usage ()
+{
+ echo "${APPNAME}: usage"
+ echo "WRITING TO DEVICE:"
+ echo "- PREPARATION: Your device must have a bootable first partition in FAT16 format!"
+ echo "- ATTENTION: The MBR of your DEVICE will be overwritten! You have been warned!"
+ echo ""
+ echo "CREATING AN IMAGE FILE:"
+ echo "- For creating an image file use the -i=IMAGEFILE switch"
+ echo "- use 'dd if=<yourimage> of=<yourdevice>' to write to your device afterwards."
+ echo ""
+ echo "PARAMETERS:"
+ echo " -d=DEVICE Your DEVICE first partition from /dev/xxx tree to install"
+ echo " -i=IMAGENAME Your IMAGENAME"
+ echo " -c=CONFIG Use CONFIG file. default: /etc/mksyslinux.conf"
+ echo " -h This message."
+ exit 1
+}
+
+[ "$1" == "" ] && usage && exit 1
+
+
+while [ $# -gt 0 ]; do
+ case $1 in
+ -c=*|--c=*) CONFIG="$(echo $1 | awk -F= '{print $2;}')" ;;
+ -d=*|--d=*) DEVICE="$(echo $1 | awk -F= '{print $2;}')" ;;
+ -i=*|--i=*) IMAGENAME="$(echo $1 | awk -F= '{print $2;}')" ;;
+ -h|--h|?) usage ;;
+ *) usage ;;
+ esac
+ shift
+done
+
+if [ ! -f "${CONFIG}" ]; then
+ echo "config file '${CONFIG}' cannot be found, aborting..."
+ exit 1
+fi
+
+if [ "${IMAGENAME}" = "" ]; then
+ if [ "${DEVICE}" = "" ]; then
+ echo "ERROR: No DEVICE name specified, please use the -d option"
+ exit 1
+ fi
+fi
+
+if ! [ $UID -eq 0 ]; then
+ echo "ERROR: only works when run as root!"
+ exit 1
+fi
+
+. "${CONFIG}"
+# export for mkinitcpio
+[ -n "${APPENDBOOTMESSAGE}" ] && export APPENDBOOTMESSAGE
+[ -n "${APPENDBOOTMESSAGE_SYSLINUX}" ] && export APPENDBOOTMESSAGE_SYSLINUX
+[ -n "${APPENDOPTIONSBOOTMESSAGE}" ] && export APPENDOPTIONSBOOTMESSAGE
+
+MBRDEVICE="$(echo ${DEVICE} | sed -e 's/[0-9]//g')"
+
+export RUNPROGRAM="${APPNAME}"
+[ "${BOOTMESSAGE}" = "" ] && export BOOTMESSAGE=$(mktemp /tmp/bootmessage.XXXX)
+[ "${OPTIONSBOOTMESSAGE}" = "" ] && export OPTIONSBOOTMESSAGE=$(mktemp /tmp/optionsbootmessage.XXXX)
+export USEKERNEL=${VERSION}
+# begin script
+[ -e ${TEMPDIR} ] && rm -r ${TEMPDIR}
+mkdir -p ${TEMPDIR}/$BOOTDIRNAME
+echo ":: Mounting ${DEVICE} ..."
+if ! [ "${IMAGENAME}" = "" ]; then
+ modprobe loop
+else
+ mount ${DEVICE} ${TEMPDIR} || exit 1
+fi
+# prepare syslinux bootloader
+install -m755 /usr/lib/syslinux/isolinux.bin ${TEMPDIR}/${BOOTDIRNAME}/isolinux.bin
+for i in /usr/lib/syslinux/*.c32; do
+ install -m644 $i ${TEMPDIR}/${BOOTDIRNAME}/$(basename $i)
+done
+install -m644 /lib/modules/$(uname -r)/modules.pcimap ${TEMPDIR}/${BOOTDIRNAME}/modules.pcimap
+install -m644 /usr/share/hwdata/pci.ids ${TEMPDIR}/${BOOTDIRNAME}/pci.ids
+
+# create syslinux.cfg
+echo ":: Creating syslinux.cfg ..."
+if [ "${SYSLINUXCFG}" = "" ]; then
+ [ -e ${TEMPDIR}/${BOOTDIRNAME}/syslinux.cfg ] && rm ${TEMPDIR}/${BOOTDIRNAME}/syslinux.cfg
+ echo "prompt ${PROMPT}" >> ${TEMPDIR}/${BOOTDIRNAME}/syslinux.cfg
+ echo "timeout ${TIMEOUT}" >> ${TEMPDIR}/${BOOTDIRNAME}/syslinux.cfg
+ echo "display boot.msg" >> ${TEMPDIR}/${BOOTDIRNAME}/syslinux.cfg
+ echo "F1 boot.msg" >> ${TEMPDIR}/${BOOTDIRNAME}/syslinux.cfg
+ echo "F2 options.msg" >> ${TEMPDIR}/${BOOTDIRNAME}/syslinux.cfg
+ echo "default arch" >> ${TEMPDIR}/${BOOTDIRNAME}/syslinux.cfg
+ echo "label arch" >> ${TEMPDIR}/${BOOTDIRNAME}/syslinux.cfg
+ echo "kernel /boot/vmlinuz" >> ${TEMPDIR}/${BOOTDIRNAME}/syslinux.cfg
+ echo "append initrd=/boot/initrd.img ${KERNEL_BOOT_OPTIONS}" >> ${TEMPDIR}/${BOOTDIRNAME}/syslinux.cfg
+else
+ sed "s|@@PROMPT@@|${PROMPT}|g;s|@@TIMEOUT@@|${TIMEOUT}|g;s|@@KERNEL_BOOT_OPTIONS@@|${KERNEL_BOOT_OPTIONS}|g" \
+ ${SYSLINUXCFG} > ${TEMPDIR}/${BOOTDIRNAME}/syslinux.cfg
+fi
+[ ! -s ${TEMPDIR}/syslinux.cfg ] && echo "No syslinux.cfg found" && exit 1
+echo ":: Calling mkinitcpio CONFIG=${MKINITCPIO_CONFIG} KERNEL=${VERSION} ..."
+# generate initramdisk
+echo ":: Creating initramdisk ..."
+ mkinitcpio -c ${MKINITCPIO_CONFIG} -k ${VERSION} -g ${TEMPDIR}/boot/initrd.img
+echo ":: Using ${KERNEL} as image kernel ..."
+ install -m644 ${KERNEL} ${TEMPDIR}/boot/vmlinuz
+ install -m644 ${BOOTMESSAGE} ${TEMPDIR}/${BOOTDIRNAME}/boot.msg
+ install -m644 ${OPTIONSBOOTMESSAGE} ${TEMPDIR}/${BOOTDIRNAME}/options.msg
+ [ ! -s ${TEMPDIR}/${BOOTDIRNAME}/boot.msg ] && echo 'ERROR:no boot.msg found, aborting!' && exit 1
+ [ ! -s ${TEMPDIR}/${BOOTDIRNAME}/options.msg ] && echo 'ERROR:no options.msg found, aborting!' && exit 1
+if ! [ "${IMAGENAME}" = "" ]; then
+ # ext2 overhead's upper bound is 6%
+ # empirically tested up to 1GB
+ rootsize=$(du -bs ${TEMPDIR}|cut -f1)
+ IMGSZ=$(( (${rootsize}*106)/100/512 + 1)) # image size in sectors
+ # create the filesystem image file
+ dd if=/dev/zero of="${IMAGENAME}" bs=512 count="${IMGSZ}"
+ # create a filesystem on the image
+ mkfs.vfat "${IMAGENAME}"
+ mount -o loop ${IMAGENAME} ${TMPDIR} || exit 1
+ cp -r "${TEMPDIR}"/* "$TMPDIR"
+ umount ${TMPDIR}
+else
+ echo ":: Unmounting ${DEVICE} ..."
+ umount ${TEMPDIR} || exit 1
+fi
+if ! [ "${IMAGENAME}" = "" ]; then
+ echo ":: Installing SYSLINUX on ${IMAGENAME} ..."
+ syslinux ${IMAGENAME} && echo "Installation completed."
+else
+ echo ":: Installing MBR on ${MBRDEVICE} ..."
+ cat ${MBR} > ${MBRDEVICE}
+ echo ":: Installing SYSLINUX on ${DEVICE} ..."
+ syslinux -o offset ${DEVICE} && echo "Installation completed."
+fi
+# clean /tmp
+rm -r ${TEMPDIR}
+! [ ${IMAGENAME} = "" ] && rm -r ${TMPDIR}
\ No newline at end of file
Deleted: mksyslinux.conf
===================================================================
--- mksyslinux.conf 2013-05-18 06:51:41 UTC (rev 185737)
+++ mksyslinux.conf 2013-05-18 06:51:48 UTC (rev 185738)
@@ -1,33 +0,0 @@
-# Created by Tobias Powalowski <tpowa at archlinux.org>
-# config file of mksyslinux
-
-# DEFAULT kernel boot options like root=/dev/hda3 etc.
-# add your root= option, if you boot from a disk device
-# and don't want to add it by hand on each boot
-KERNEL_BOOT_OPTIONS=""
-
-# mkinitcpio config file, defaulted to stock config file
-MKINITCPIO_CONFIG="/etc/mkinitcpio.conf"
-
-# kernel version, defaulted to build for runtime kernel
-VERSION="$(uname -r)"
-
-# kernel image, defaulted to stock arch kernel
-KERNEL="/boot/vmlinuz-linux"
-
-# boot message files
-BOOTMESSAGE="/usr/share/mksyslinux/boot.msg"
-OPTIONSBOOTMESSAGE="/usr/share/mksyslinux/options.msg"
-
-syslinux.cfg file to use
-SYSLINUXCFG=""
-
-# Prompt on boot, 1=yes 0=no
-PROMPT="1"
-
-# Timeout, 30 seconds to fix usb keyboard issues
-# 0 means wait for prompt
-TIMEOUT="300"
-
-# default MBR
-MBR="/usr/lib/syslinux/mbr.bin"
Copied: mksyslinux/repos/extra-any/mksyslinux.conf (from rev 185737, mksyslinux/trunk/mksyslinux.conf)
===================================================================
--- mksyslinux.conf (rev 0)
+++ mksyslinux.conf 2013-05-18 06:51:48 UTC (rev 185738)
@@ -0,0 +1,33 @@
+# Created by Tobias Powalowski <tpowa at archlinux.org>
+# config file of mksyslinux
+
+# DEFAULT kernel boot options like root=/dev/hda3 etc.
+# add your root= option, if you boot from a disk device
+# and don't want to add it by hand on each boot
+KERNEL_BOOT_OPTIONS=""
+
+# mkinitcpio config file, defaulted to stock config file
+MKINITCPIO_CONFIG="/etc/mkinitcpio.conf"
+
+# kernel version, defaulted to build for runtime kernel
+VERSION="$(uname -r)"
+
+# kernel image, defaulted to stock arch kernel
+KERNEL="/boot/vmlinuz-linux"
+
+# boot message files
+BOOTMESSAGE="/usr/share/mksyslinux/boot.msg"
+OPTIONSBOOTMESSAGE="/usr/share/mksyslinux/options.msg"
+
+syslinux.cfg file to use
+SYSLINUXCFG=""
+
+# Prompt on boot, 1=yes 0=no
+PROMPT="1"
+
+# Timeout, 30 seconds to fix usb keyboard issues
+# 0 means wait for prompt
+TIMEOUT="300"
+
+# default MBR
+MBR="/usr/lib/syslinux/mbr.bin"
Deleted: options.msg
===================================================================
--- options.msg 2013-05-18 06:51:41 UTC (rev 185737)
+++ options.msg 2013-05-18 06:51:48 UTC (rev 185738)
@@ -1,6 +0,0 @@
-------------------------------------------------------------------------------
-Arch Linux options and troubleshooting:
-
-- If your system hangs during the boot process, any combinations of the
- boot options noapic acpi=off pci=routeirq nosmp nomsi may be useful.
-------------------------------------------------------------------------------
\ No newline at end of file
Copied: mksyslinux/repos/extra-any/options.msg (from rev 185737, mksyslinux/trunk/options.msg)
===================================================================
--- options.msg (rev 0)
+++ options.msg 2013-05-18 06:51:48 UTC (rev 185738)
@@ -0,0 +1,6 @@
+------------------------------------------------------------------------------
+Arch Linux options and troubleshooting:
+
+- If your system hangs during the boot process, any combinations of the
+ boot options noapic acpi=off pci=routeirq nosmp nomsi may be useful.
+------------------------------------------------------------------------------
\ No newline at end of file
More information about the arch-commits
mailing list