[arch-commits] Commit in mdadm/repos (20 files)

Tobias Powalowski tpowa at archlinux.org
Thu Dec 11 08:49:56 UTC 2014


    Date: Thursday, December 11, 2014 @ 09:49:55
  Author: tpowa
Revision: 227431

archrelease: copy trunk to testing-i686, testing-x86_64

Added:
  mdadm/repos/testing-i686/
  mdadm/repos/testing-i686/PKGBUILD
    (from rev 227430, mdadm/trunk/PKGBUILD)
  mdadm/repos/testing-i686/disable-werror.patch
    (from rev 227430, mdadm/trunk/disable-werror.patch)
  mdadm/repos/testing-i686/linux-3.0.patch
    (from rev 227430, mdadm/trunk/linux-3.0.patch)
  mdadm/repos/testing-i686/mdadm-fix-udev-rules.patch
    (from rev 227430, mdadm/trunk/mdadm-fix-udev-rules.patch)
  mdadm/repos/testing-i686/mdadm.conf
    (from rev 227430, mdadm/trunk/mdadm.conf)
  mdadm/repos/testing-i686/mdadm.service
    (from rev 227430, mdadm/trunk/mdadm.service)
  mdadm/repos/testing-i686/mdadm_hook
    (from rev 227430, mdadm/trunk/mdadm_hook)
  mdadm/repos/testing-i686/mdadm_install
    (from rev 227430, mdadm/trunk/mdadm_install)
  mdadm/repos/testing-i686/mdadm_udev_install
    (from rev 227430, mdadm/trunk/mdadm_udev_install)
  mdadm/repos/testing-x86_64/
  mdadm/repos/testing-x86_64/PKGBUILD
    (from rev 227430, mdadm/trunk/PKGBUILD)
  mdadm/repos/testing-x86_64/disable-werror.patch
    (from rev 227430, mdadm/trunk/disable-werror.patch)
  mdadm/repos/testing-x86_64/linux-3.0.patch
    (from rev 227430, mdadm/trunk/linux-3.0.patch)
  mdadm/repos/testing-x86_64/mdadm-fix-udev-rules.patch
    (from rev 227430, mdadm/trunk/mdadm-fix-udev-rules.patch)
  mdadm/repos/testing-x86_64/mdadm.conf
    (from rev 227430, mdadm/trunk/mdadm.conf)
  mdadm/repos/testing-x86_64/mdadm.service
    (from rev 227430, mdadm/trunk/mdadm.service)
  mdadm/repos/testing-x86_64/mdadm_hook
    (from rev 227430, mdadm/trunk/mdadm_hook)
  mdadm/repos/testing-x86_64/mdadm_install
    (from rev 227430, mdadm/trunk/mdadm_install)
  mdadm/repos/testing-x86_64/mdadm_udev_install
    (from rev 227430, mdadm/trunk/mdadm_udev_install)

-------------------------------------------+
 testing-i686/PKGBUILD                     |   55 +++++++++++
 testing-i686/disable-werror.patch         |   11 ++
 testing-i686/linux-3.0.patch              |   45 +++++++++
 testing-i686/mdadm-fix-udev-rules.patch   |  137 ++++++++++++++++++++++++++++
 testing-i686/mdadm.conf                   |   67 +++++++++++++
 testing-i686/mdadm.service                |    8 +
 testing-i686/mdadm_hook                   |   49 ++++++++++
 testing-i686/mdadm_install                |   46 +++++++++
 testing-i686/mdadm_udev_install           |   25 +++++
 testing-x86_64/PKGBUILD                   |   55 +++++++++++
 testing-x86_64/disable-werror.patch       |   11 ++
 testing-x86_64/linux-3.0.patch            |   45 +++++++++
 testing-x86_64/mdadm-fix-udev-rules.patch |  137 ++++++++++++++++++++++++++++
 testing-x86_64/mdadm.conf                 |   67 +++++++++++++
 testing-x86_64/mdadm.service              |    8 +
 testing-x86_64/mdadm_hook                 |   49 ++++++++++
 testing-x86_64/mdadm_install              |   46 +++++++++
 testing-x86_64/mdadm_udev_install         |   25 +++++
 18 files changed, 886 insertions(+)

Copied: mdadm/repos/testing-i686/PKGBUILD (from rev 227430, mdadm/trunk/PKGBUILD)
===================================================================
--- testing-i686/PKGBUILD	                        (rev 0)
+++ testing-i686/PKGBUILD	2014-12-11 08:49:55 UTC (rev 227431)
@@ -0,0 +1,55 @@
+# $Id$
+# Maintainer: Tobias Powalowski <tpowa at archlinux.org>
+# Contributor: Judd Vinet <jvinet at zeroflux.org>
+pkgname=mdadm
+pkgver=3.3.2
+pkgrel=1
+pkgdesc="A tool for managing/monitoring Linux md device arrays, also known as Software RAID"
+arch=(i686 x86_64)
+license=('GPL')
+url="http://neil.brown.name/blog/mdadm"
+groups=('base')
+conflicts=('mkinitcpio<0.7')
+depends=('glibc')
+backup=('etc/mdadm.conf')
+source=(ftp://ftp.kernel.org/pub/linux/utils/raid/mdadm/mdadm-$pkgver.tar.xz
+        mdadm.conf 
+        mdadm_install
+        mdadm_hook
+        mdadm_udev_install
+        mdadm.service
+        disable-werror.patch)
+replaces=('raidtools')
+md5sums=('44698d351501cac6a89072dc877eb220'
+         '5a37c112aa07dccdde62f9fa5b888607'
+         'af2f73f0094ebee66f503ca4710c7142'
+         'fbfb7d07efcbaf5dc61af424c5f6e352'
+         'b6b0bfd6487c99264578630616dfe5eb'
+         'eb1786b18fa4d13cfd7b71d6b05cfb4f'
+         '599745ed2bec4489e83991cff89c46ee')
+
+prepare() {
+  cd $srcdir/$pkgname-$pkgver
+  patch -Np0 -i ../disable-werror.patch
+}
+
+build() {
+  cd $srcdir/$pkgname-$pkgver
+  make CXFLAGS="$CFLAGS" BINDIR=/usr/bin UDEVDIR=/usr/lib/udev
+  # build static mdassemble for Arch's initramfs
+  make MDASSEMBLE_AUTO=1 mdassemble
+  
+}
+
+package() {
+  cd $srcdir/$pkgname-$pkgver
+  make INSTALL=/usr/bin/install BINDIR=/usr/bin DESTDIR=$pkgdir UDEVDIR=/usr/lib/udev install
+  make SYSTEMD_DIR=$pkgdir/usr/lib/systemd/system install-systemd
+  install -D -m755 mdassemble $pkgdir/usr/bin/mdassemble
+  install -D -m644 ../mdadm.conf $pkgdir/etc/mdadm.conf
+  install -D -m644 ../mdadm_install $pkgdir/usr/lib/initcpio/install/mdadm
+  install -D -m644 ../mdadm_hook $pkgdir/usr/lib/initcpio/hooks/mdadm
+  install -D -m644 ../mdadm_udev_install $pkgdir/usr/lib/initcpio/install/mdadm_udev
+  # systemd service file
+  install -D -m644 $srcdir/mdadm.service $pkgdir/usr/lib/systemd/system/mdadm.service
+}

Copied: mdadm/repos/testing-i686/disable-werror.patch (from rev 227430, mdadm/trunk/disable-werror.patch)
===================================================================
--- testing-i686/disable-werror.patch	                        (rev 0)
+++ testing-i686/disable-werror.patch	2014-12-11 08:49:55 UTC (rev 227431)
@@ -0,0 +1,11 @@
+--- Makefile.old	2011-06-17 09:38:03.269238332 +0200
++++ Makefile	2011-06-17 09:38:14.122398837 +0200
+@@ -42,7 +42,7 @@
+ 
+ CC = $(CROSS_COMPILE)gcc
+ CXFLAGS ?= -ggdb
+-CWFLAGS = -Wall -Werror -Wstrict-prototypes -Wextra -Wno-unused-parameter
++CWFLAGS = -Wall -Wstrict-prototypes -Wextra -Wno-unused-parameter
+ ifdef WARN_UNUSED
+ CWFLAGS += -Wp,-D_FORTIFY_SOURCE=2 -O3
+ endif

Copied: mdadm/repos/testing-i686/linux-3.0.patch (from rev 227430, mdadm/trunk/linux-3.0.patch)
===================================================================
--- testing-i686/linux-3.0.patch	                        (rev 0)
+++ testing-i686/linux-3.0.patch	2014-12-11 08:49:55 UTC (rev 227431)
@@ -0,0 +1,45 @@
+From f161d047eed634b3380262767f955eb888502e88 Mon Sep 17 00:00:00 2001
+From: NeilBrown <neilb at suse.de>
+Date: Fri, 17 Jun 2011 22:49:24 +1000
+Subject: [PATCH 1/1] util: correctly parse shorter linux version numbers.
+
+The next version of Linux might be 3.0.  If it is, get_linux_version
+will fail.
+So make it more robust.
+
+Reported-by: Namhyung Kim <namhyung at gmail.com>
+Reported-by: Milan Broz <mbroz at redhat.com>
+Signed-off-by: NeilBrown <neilb at suse.de>
+---
+ util.c |   10 +++++-----
+ 1 files changed, 5 insertions(+), 5 deletions(-)
+
+diff --git a/util.c b/util.c
+index 10bbe56..55d171a 100644
+--- a/util.c
++++ b/util.c
+@@ -146,16 +146,16 @@ int get_linux_version()
+ {
+ 	struct utsname name;
+ 	char *cp;
+-	int a,b,c;
++	int a = 0, b = 0,c = 0;
+ 	if (uname(&name) <0)
+ 		return -1;
+ 
+ 	cp = name.release;
+ 	a = strtoul(cp, &cp, 10);
+-	if (*cp != '.') return -1;
+-	b = strtoul(cp+1, &cp, 10);
+-	if (*cp != '.') return -1;
+-	c = strtoul(cp+1, NULL, 10);
++	if (*cp == '.')
++		b = strtoul(cp+1, &cp, 10);
++	if (*cp == '.')
++		c = strtoul(cp+1, &cp, 10);
+ 
+ 	return (a*1000000)+(b*1000)+c;
+ }
+-- 
+1.7.2.3
+

Copied: mdadm/repos/testing-i686/mdadm-fix-udev-rules.patch (from rev 227430, mdadm/trunk/mdadm-fix-udev-rules.patch)
===================================================================
--- testing-i686/mdadm-fix-udev-rules.patch	                        (rev 0)
+++ testing-i686/mdadm-fix-udev-rules.patch	2014-12-11 08:49:55 UTC (rev 227431)
@@ -0,0 +1,137 @@
+diff --git a/Makefile b/Makefile
+index b6edb23..bedef96 100644
+--- a/Makefile
++++ b/Makefile
+@@ -253,8 +253,9 @@
+ 	$(INSTALL) -D -m 644 md.4 $(DESTDIR)$(MAN4DIR)/md.4
+ 	$(INSTALL) -D -m 644 mdadm.conf.5 $(DESTDIR)$(MAN5DIR)/mdadm.conf.5
+ 
+-install-udev: udev-md-raid.rules
+-	$(INSTALL) -D -m 644 udev-md-raid.rules $(DESTDIR)/lib/udev/rules.d/64-md-raid.rules
++install-udev: udev-md-raid-arrays.rules udev-md-raid-assembly.rules
++	$(INSTALL) -D -m 644 udev-md-raid-arrays.rules $(DESTDIR)/usr/lib/udev/rules.d/63-md-raid-arrays.rules
++	$(INSTALL) -D -m 644 udev-md-raid-assembly.rules $(DESTDIR)/usr/lib/udev/rules.d/64-md-raid-assembly.rules
+ 
+ uninstall:
+ 	rm -f $(DESTDIR)$(MAN8DIR)/mdadm.8 $(DESTDIR)$(MAN8DIR)/mdmon.8 $(DESTDIR)$(MAN4DIR)/md.4 $(DESTDIR)$(MAN5DIR)/mdadm.conf.5 $(DESTDIR)$(BINDIR)/mdadm
+diff --git a/udev-md-raid-arrays.rules b/udev-md-raid-arrays.rules
+new file mode 100644
+index 0000000..883ee4d
+--- /dev/null
++++ b/udev-md-raid-arrays.rules
+@@ -0,0 +1,35 @@
++# do not edit this file, it will be overwritten on update
++
++SUBSYSTEM!="block", GOTO="md_end"
++
++# handle md arrays
++ACTION!="add|change", GOTO="md_end"
++KERNEL!="md*", GOTO="md_end"
++
++# partitions have no md/{array_state,metadata_version}, but should not
++# for that reason be ignored.
++ENV{DEVTYPE}=="partition", GOTO="md_ignore_state"
++
++# container devices have a metadata version of e.g. 'external:ddf' and
++# never leave state 'inactive'
++ATTR{md/metadata_version}=="external:[A-Za-z]*", ATTR{md/array_state}=="inactive", GOTO="md_ignore_state"
++TEST!="md/array_state", ENV{SYSTEMD_READY}="0", GOTO="md_end"
++ATTR{md/array_state}=="|clear|inactive", ENV{SYSTEMD_READY}="0", GOTO="md_end"
++LABEL="md_ignore_state"
++
++IMPORT{program}="/usr/bin/mdadm --detail --export $devnode"
++ENV{DEVTYPE}=="disk", ENV{MD_NAME}=="?*", SYMLINK+="disk/by-id/md-name-$env{MD_NAME}", OPTIONS+="string_escape=replace"
++ENV{DEVTYPE}=="disk", ENV{MD_UUID}=="?*", SYMLINK+="disk/by-id/md-uuid-$env{MD_UUID}"
++ENV{DEVTYPE}=="disk", ENV{MD_DEVNAME}=="?*", SYMLINK+="md/$env{MD_DEVNAME}"
++ENV{DEVTYPE}=="partition", ENV{MD_NAME}=="?*", SYMLINK+="disk/by-id/md-name-$env{MD_NAME}-part%n", OPTIONS+="string_escape=replace"
++ENV{DEVTYPE}=="partition", ENV{MD_UUID}=="?*", SYMLINK+="disk/by-id/md-uuid-$env{MD_UUID}-part%n"
++ENV{DEVTYPE}=="partition", ENV{MD_DEVNAME}=="*[^0-9]", SYMLINK+="md/$env{MD_DEVNAME}%n"
++ENV{DEVTYPE}=="partition", ENV{MD_DEVNAME}=="*[0-9]", SYMLINK+="md/$env{MD_DEVNAME}p%n"
++
++IMPORT{builtin}="blkid"
++OPTIONS+="link_priority=100"
++OPTIONS+="watch"
++ENV{ID_FS_USAGE}=="filesystem|other|crypto", ENV{ID_FS_UUID_ENC}=="?*", SYMLINK+="disk/by-uuid/$env{ID_FS_UUID_ENC}"
++ENV{ID_FS_USAGE}=="filesystem|other", ENV{ID_FS_LABEL_ENC}=="?*", SYMLINK+="disk/by-label/$env{ID_FS_LABEL_ENC}"
++
++LABEL="md_end"
+diff --git a/udev-md-raid-assembly.rules b/udev-md-raid-assembly.rules
+new file mode 100644
+index 0000000..b89775e
+--- /dev/null
++++ b/udev-md-raid-assembly.rules
+@@ -0,0 +1,19 @@
++# do not edit this file, it will be overwritten on update
++
++# assemble md arrays
++
++SUBSYSTEM!="block", GOTO="md_inc_end"
++
++# handle potential components of arrays (the ones supported by md)
++ENV{ID_FS_TYPE}=="ddf_raid_member|isw_raid_member|linux_raid_member", GOTO="md_inc"
++GOTO="md_inc_end"
++
++LABEL="md_inc"
++
++# remember you can limit what gets auto/incrementally assembled by
++# mdadm.conf(5)'s 'AUTO' and selectively whitelist using 'ARRAY'
++ACTION=="add", RUN+="/usr/bin/mdadm --incremental $devnode --offroot"
++ACTION=="remove", ENV{ID_PATH}=="?*", RUN+="/usr/bin/mdadm -If $name --path $env{ID_PATH}"
++ACTION=="remove", ENV{ID_PATH}!="?*", RUN+="/usr/bin/mdadm -If $name"
++
++LABEL="md_inc_end"
+diff --git a/udev-md-raid.rules b/udev-md-raid.rules
+deleted file mode 100644
+index cc7f5ef..0000000
+--- a/udev-md-raid.rules
++++ /dev/null
+@@ -1,49 +0,0 @@
+-# do not edit this file, it will be overwritten on update
+-
+-SUBSYSTEM!="block", GOTO="md_end"
+-
+-# handle potential components of arrays (the ones supported by md)
+-ENV{ID_FS_TYPE}=="ddf_raid_member|isw_raid_member|linux_raid_member", GOTO="md_inc"
+-GOTO="md_inc_skip"
+-
+-LABEL="md_inc"
+-
+-# remember you can limit what gets auto/incrementally assembled by
+-# mdadm.conf(5)'s 'AUTO' and selectively whitelist using 'ARRAY'
+-ACTION=="add", RUN+="/sbin/mdadm --incremental $tempnode --offroot"
+-ACTION=="remove", ENV{ID_PATH}=="?*", RUN+="/sbin/mdadm -If $name --path $env{ID_PATH}"
+-ACTION=="remove", ENV{ID_PATH}!="?*", RUN+="/sbin/mdadm -If $name"
+-
+-LABEL="md_inc_skip"
+-
+-# handle md arrays
+-ACTION!="add|change", GOTO="md_end"
+-KERNEL!="md*", GOTO="md_end"
+-
+-# partitions have no md/{array_state,metadata_version}, but should not
+-# for that reason be ignored.
+-ENV{DEVTYPE}=="partition", GOTO="md_ignore_state"
+-
+-# container devices have a metadata version of e.g. 'external:ddf' and
+-# never leave state 'inactive'
+-ATTR{md/metadata_version}=="external:[A-Za-z]*", ATTR{md/array_state}=="inactive", GOTO="md_ignore_state"
+-TEST!="md/array_state", ENV{SYSTEMD_READY}="0", GOTO="md_end"
+-ATTR{md/array_state}=="|clear|inactive", ENV{SYSTEMD_READY}="0", GOTO="md_end"
+-LABEL="md_ignore_state"
+-
+-IMPORT{program}="/sbin/mdadm --detail --export $tempnode"
+-ENV{DEVTYPE}=="disk", ENV{MD_NAME}=="?*", SYMLINK+="disk/by-id/md-name-$env{MD_NAME}", OPTIONS+="string_escape=replace"
+-ENV{DEVTYPE}=="disk", ENV{MD_UUID}=="?*", SYMLINK+="disk/by-id/md-uuid-$env{MD_UUID}"
+-ENV{DEVTYPE}=="disk", ENV{MD_DEVNAME}=="?*", SYMLINK+="md/$env{MD_DEVNAME}"
+-ENV{DEVTYPE}=="partition", ENV{MD_NAME}=="?*", SYMLINK+="disk/by-id/md-name-$env{MD_NAME}-part%n", OPTIONS+="string_escape=replace"
+-ENV{DEVTYPE}=="partition", ENV{MD_UUID}=="?*", SYMLINK+="disk/by-id/md-uuid-$env{MD_UUID}-part%n"
+-ENV{DEVTYPE}=="partition", ENV{MD_DEVNAME}=="*[^0-9]", SYMLINK+="md/$env{MD_DEVNAME}%n"
+-ENV{DEVTYPE}=="partition", ENV{MD_DEVNAME}=="*[0-9]", SYMLINK+="md/$env{MD_DEVNAME}p%n"
+-
+-IMPORT{program}="/sbin/blkid -o udev -p $tempnode"
+-OPTIONS+="link_priority=100"
+-OPTIONS+="watch"
+-ENV{ID_FS_USAGE}=="filesystem|other|crypto", ENV{ID_FS_UUID_ENC}=="?*", SYMLINK+="disk/by-uuid/$env{ID_FS_UUID_ENC}"
+-ENV{ID_FS_USAGE}=="filesystem|other", ENV{ID_FS_LABEL_ENC}=="?*", SYMLINK+="disk/by-label/$env{ID_FS_LABEL_ENC}"
+-
+-LABEL="md_end"

Copied: mdadm/repos/testing-i686/mdadm.conf (from rev 227430, mdadm/trunk/mdadm.conf)
===================================================================
--- testing-i686/mdadm.conf	                        (rev 0)
+++ testing-i686/mdadm.conf	2014-12-11 08:49:55 UTC (rev 227431)
@@ -0,0 +1,67 @@
+# mdadm configuration file
+#
+# mdadm will function properly without the use of a configuration file,
+# but this file is useful for keeping track of arrays and member disks.
+# In general, a mdadm.conf file is created, and updated, after arrays
+# are created. This is the opposite behavior of /etc/raidtab which is
+# created prior to array construction.
+#
+#
+# the config file takes two types of lines:
+#
+#	DEVICE lines specify a list of devices of where to look for
+#	  potential member disks
+#
+#	ARRAY lines specify information about how to identify arrays so
+#	  so that they can be activated
+#
+
+
+# You can have more than one device line and use wild cards. The first 
+# example includes SCSI the first partition of SCSI disks /dev/sdb,
+# /dev/sdc, /dev/sdd, /dev/sdj, /dev/sdk, and /dev/sdl. The second 
+# line looks for array slices on IDE disks.
+#
+#DEVICE /dev/sd[bcdjkl]1
+#DEVICE /dev/hda1 /dev/hdb1
+#
+# The designation "partitions" will scan all partitions found in
+# /proc/partitions
+DEVICE partitions
+
+
+# ARRAY lines specify an array to assemble and a method of identification.
+# Arrays can currently be identified by using a UUID, superblock minor number,
+# or a listing of devices.
+#
+#	super-minor is usually the minor number of the metadevice
+#	UUID is the Universally Unique Identifier for the array
+# Each can be obtained using
+#
+# 	mdadm -D <md>
+#
+# To capture the UUIDs for all your RAID arrays to this file, run these:
+#    to get a list of running arrays:
+#    # mdadm -D --scan >>/etc/mdadm.conf
+#    to get a list from superblocks:
+#    # mdadm -E --scan >>/etc/mdadm.conf
+#
+#ARRAY /dev/md0 UUID=3aaa0122:29827cfa:5331ad66:ca767371
+#ARRAY /dev/md1 super-minor=1
+#ARRAY /dev/md2 devices=/dev/hda1,/dev/hdb1
+#
+# ARRAY lines can also specify a "spare-group" for each array.  mdadm --monitor
+# will then move a spare between arrays in a spare-group if one array has a
+# failed drive but no spare
+#ARRAY /dev/md4 uuid=b23f3c6d:aec43a9f:fd65db85:369432df spare-group=group1
+#ARRAY /dev/md5 uuid=19464854:03f71b1b:e0df2edd:246cc977 spare-group=group1
+#
+
+
+# When used in --follow (aka --monitor) mode, mdadm needs a
+# mail address and/or a program.  To start mdadm's monitor mode, enable
+# mdadm.service in systemd.
+#
+# If the lines are not found, mdadm will exit quietly
+#MAILADDR root at mydomain.tld
+#PROGRAM /usr/sbin/handle-mdadm-events

Copied: mdadm/repos/testing-i686/mdadm.service (from rev 227430, mdadm/trunk/mdadm.service)
===================================================================
--- testing-i686/mdadm.service	                        (rev 0)
+++ testing-i686/mdadm.service	2014-12-11 08:49:55 UTC (rev 227431)
@@ -0,0 +1,8 @@
+[Unit]
+Description=MDADM Event Monitor
+
+[Service]
+ExecStart=/usr/bin/mdadm --monitor --scan
+
+[Install]
+WantedBy=multi-user.target

Copied: mdadm/repos/testing-i686/mdadm_hook (from rev 227430, mdadm/trunk/mdadm_hook)
===================================================================
--- testing-i686/mdadm_hook	                        (rev 0)
+++ testing-i686/mdadm_hook	2014-12-11 08:49:55 UTC (rev 227431)
@@ -0,0 +1,49 @@
+#!/usr/bin/ash
+
+run_hook() {
+    local i= mdconfig=/etc/mdadm.conf
+
+    # for partitionable raid, we need to load md_mod first!
+    modprobe md_mod 2>/dev/null
+
+    if [ -n "$md" ]; then
+        echo 'DEVICE partitions' >"$mdconfig"
+        for i in $(cat /proc/cmdline); do
+            case $i in
+                # raid
+                md=[0-9]*,/*)
+                    device=${i%%,*}
+                    device=${device/=/}
+                    array=${i#*,}
+                    echo "ARRAY /dev/$device devices=$array"
+                    ;;
+                # partitionable raid
+                md=d[0-9]*,/*)
+                    device=${i%%,*}
+                    device=${device/=/_}
+                    array=${i#*,}
+                    echo "ARRAY /dev/$device devices=$array"
+                    ;;
+                # raid UUID
+                md=[0-9]*,[0-9,a-fA-F]*)
+                    device=${i%%,*}
+                    device=${device/=/}
+                    array=${i#*,}
+                    echo "ARRAY /dev/$device UUID=$array"
+                    ;;
+                # partitionable raid UUID
+                md=d[0-9]*,[0-9,a-fA-F]*)
+                    device=${i%%,*}
+                    device=${device/=/_}
+                    array=${i#*,}
+                    echo "ARRAY /dev/$device UUID=$array"
+                    ;;
+            esac
+        done >>"$mdconfig"
+    fi
+
+    # assemble everything
+    [ -s "$mdconfig" ] && /usr/bin/mdassemble
+}
+
+# vim: set ft=sh ts=4 sw=4 et:

Copied: mdadm/repos/testing-i686/mdadm_install (from rev 227430, mdadm/trunk/mdadm_install)
===================================================================
--- testing-i686/mdadm_install	                        (rev 0)
+++ testing-i686/mdadm_install	2014-12-11 08:49:55 UTC (rev 227431)
@@ -0,0 +1,46 @@
+#!/bin/bash
+
+build() {
+    add_checked_modules -f 'dm-' 'drivers/md/*'
+
+    # check if a custom mdadm.conf exists
+    if grep -q ^ARRAY /etc/mdadm.conf; then
+        echo "Custom /etc/mdadm.conf file will be used in initramfs for assembling arrays."
+        add_file "/etc/mdadm.conf"
+    fi
+    add_binary "/usr/bin/mdassemble"
+    add_file "/usr/lib/udev/rules.d/63-md-raid-arrays.rules"
+
+    add_runscript
+}
+
+help() {
+  cat <<HELPEOF
+This hook loads the necessary modules for any raid root device,
+and assembles the raid device when run.
+
+If arrays are defined in /etc/mdadm.conf, the file will be used instead
+of command line assembling.
+
+Command Line Setup:
+- for raid arrays with persistent superblocks:
+  md=<md device no.>,dev0,dev1,...,devn
+  md=<md device no.>,uuid
+- for partitionable raid arrays with persistent superblocks:
+  md=d<md device no.>,dev0,dev1,...,devn
+  md=d<md device no.>,uuid
+
+Parameters:
+- <md device no.> = the number of the md device: 
+  0 means md0, 1 means md1, ...
+- <dev0-devn>: e.g. /dev/hda1,/dev/hdc1,/dev/sda1,/dev/sdb1
+                 or 0900878d:f95f6057:c39a36e9:55efa60a
+Examples:
+- md=d0,/dev/sda3,/dev/sda4 md=d1,/dev/hda1,/dev/hdb1
+  This will setup 2 md partitionable arrays.
+- md=0,/dev/sda3,/dev/sda4 md=1,/dev/hda1,/dev/hdb1
+  This will setup 2 md arrays with persistent superblocks.
+HELPEOF
+}
+
+# vim: set ft=sh ts=4 sw=4 et:

Copied: mdadm/repos/testing-i686/mdadm_udev_install (from rev 227430, mdadm/trunk/mdadm_udev_install)
===================================================================
--- testing-i686/mdadm_udev_install	                        (rev 0)
+++ testing-i686/mdadm_udev_install	2014-12-11 08:49:55 UTC (rev 227431)
@@ -0,0 +1,25 @@
+#!/bin/bash
+
+build() {
+    add_checked_modules -f 'dm-' 'drivers/md/*'
+
+    # check if a custom mdadm.conf exists
+    if grep -qw ^ARRAY "$BASEDIR/etc/mdadm.conf"; then
+        echo "Custom /etc/mdadm.conf file will be used in initramfs for assembling arrays."
+        add_file "/etc/mdadm.conf"
+    fi
+
+    add_binary "/usr/bin/mdadm"
+    add_file "/usr/lib/udev/rules.d/63-md-raid-arrays.rules"
+    add_file "/usr/lib/udev/rules.d/64-md-raid-assembly.rules"
+}
+
+help() {
+  cat <<HELPEOF
+This hook loads the necessary modules for a RAID array and uses incremental
+assembly via udev at runtime to create the devices. This hook will NOT work
+without the udev hook included on the image.
+HELPEOF
+}
+
+# vim: set ft=sh ts=4 sw=4 et:

Copied: mdadm/repos/testing-x86_64/PKGBUILD (from rev 227430, mdadm/trunk/PKGBUILD)
===================================================================
--- testing-x86_64/PKGBUILD	                        (rev 0)
+++ testing-x86_64/PKGBUILD	2014-12-11 08:49:55 UTC (rev 227431)
@@ -0,0 +1,55 @@
+# $Id$
+# Maintainer: Tobias Powalowski <tpowa at archlinux.org>
+# Contributor: Judd Vinet <jvinet at zeroflux.org>
+pkgname=mdadm
+pkgver=3.3.2
+pkgrel=1
+pkgdesc="A tool for managing/monitoring Linux md device arrays, also known as Software RAID"
+arch=(i686 x86_64)
+license=('GPL')
+url="http://neil.brown.name/blog/mdadm"
+groups=('base')
+conflicts=('mkinitcpio<0.7')
+depends=('glibc')
+backup=('etc/mdadm.conf')
+source=(ftp://ftp.kernel.org/pub/linux/utils/raid/mdadm/mdadm-$pkgver.tar.xz
+        mdadm.conf 
+        mdadm_install
+        mdadm_hook
+        mdadm_udev_install
+        mdadm.service
+        disable-werror.patch)
+replaces=('raidtools')
+md5sums=('44698d351501cac6a89072dc877eb220'
+         '5a37c112aa07dccdde62f9fa5b888607'
+         'af2f73f0094ebee66f503ca4710c7142'
+         'fbfb7d07efcbaf5dc61af424c5f6e352'
+         'b6b0bfd6487c99264578630616dfe5eb'
+         'eb1786b18fa4d13cfd7b71d6b05cfb4f'
+         '599745ed2bec4489e83991cff89c46ee')
+
+prepare() {
+  cd $srcdir/$pkgname-$pkgver
+  patch -Np0 -i ../disable-werror.patch
+}
+
+build() {
+  cd $srcdir/$pkgname-$pkgver
+  make CXFLAGS="$CFLAGS" BINDIR=/usr/bin UDEVDIR=/usr/lib/udev
+  # build static mdassemble for Arch's initramfs
+  make MDASSEMBLE_AUTO=1 mdassemble
+  
+}
+
+package() {
+  cd $srcdir/$pkgname-$pkgver
+  make INSTALL=/usr/bin/install BINDIR=/usr/bin DESTDIR=$pkgdir UDEVDIR=/usr/lib/udev install
+  make SYSTEMD_DIR=$pkgdir/usr/lib/systemd/system install-systemd
+  install -D -m755 mdassemble $pkgdir/usr/bin/mdassemble
+  install -D -m644 ../mdadm.conf $pkgdir/etc/mdadm.conf
+  install -D -m644 ../mdadm_install $pkgdir/usr/lib/initcpio/install/mdadm
+  install -D -m644 ../mdadm_hook $pkgdir/usr/lib/initcpio/hooks/mdadm
+  install -D -m644 ../mdadm_udev_install $pkgdir/usr/lib/initcpio/install/mdadm_udev
+  # systemd service file
+  install -D -m644 $srcdir/mdadm.service $pkgdir/usr/lib/systemd/system/mdadm.service
+}

Copied: mdadm/repos/testing-x86_64/disable-werror.patch (from rev 227430, mdadm/trunk/disable-werror.patch)
===================================================================
--- testing-x86_64/disable-werror.patch	                        (rev 0)
+++ testing-x86_64/disable-werror.patch	2014-12-11 08:49:55 UTC (rev 227431)
@@ -0,0 +1,11 @@
+--- Makefile.old	2011-06-17 09:38:03.269238332 +0200
++++ Makefile	2011-06-17 09:38:14.122398837 +0200
+@@ -42,7 +42,7 @@
+ 
+ CC = $(CROSS_COMPILE)gcc
+ CXFLAGS ?= -ggdb
+-CWFLAGS = -Wall -Werror -Wstrict-prototypes -Wextra -Wno-unused-parameter
++CWFLAGS = -Wall -Wstrict-prototypes -Wextra -Wno-unused-parameter
+ ifdef WARN_UNUSED
+ CWFLAGS += -Wp,-D_FORTIFY_SOURCE=2 -O3
+ endif

Copied: mdadm/repos/testing-x86_64/linux-3.0.patch (from rev 227430, mdadm/trunk/linux-3.0.patch)
===================================================================
--- testing-x86_64/linux-3.0.patch	                        (rev 0)
+++ testing-x86_64/linux-3.0.patch	2014-12-11 08:49:55 UTC (rev 227431)
@@ -0,0 +1,45 @@
+From f161d047eed634b3380262767f955eb888502e88 Mon Sep 17 00:00:00 2001
+From: NeilBrown <neilb at suse.de>
+Date: Fri, 17 Jun 2011 22:49:24 +1000
+Subject: [PATCH 1/1] util: correctly parse shorter linux version numbers.
+
+The next version of Linux might be 3.0.  If it is, get_linux_version
+will fail.
+So make it more robust.
+
+Reported-by: Namhyung Kim <namhyung at gmail.com>
+Reported-by: Milan Broz <mbroz at redhat.com>
+Signed-off-by: NeilBrown <neilb at suse.de>
+---
+ util.c |   10 +++++-----
+ 1 files changed, 5 insertions(+), 5 deletions(-)
+
+diff --git a/util.c b/util.c
+index 10bbe56..55d171a 100644
+--- a/util.c
++++ b/util.c
+@@ -146,16 +146,16 @@ int get_linux_version()
+ {
+ 	struct utsname name;
+ 	char *cp;
+-	int a,b,c;
++	int a = 0, b = 0,c = 0;
+ 	if (uname(&name) <0)
+ 		return -1;
+ 
+ 	cp = name.release;
+ 	a = strtoul(cp, &cp, 10);
+-	if (*cp != '.') return -1;
+-	b = strtoul(cp+1, &cp, 10);
+-	if (*cp != '.') return -1;
+-	c = strtoul(cp+1, NULL, 10);
++	if (*cp == '.')
++		b = strtoul(cp+1, &cp, 10);
++	if (*cp == '.')
++		c = strtoul(cp+1, &cp, 10);
+ 
+ 	return (a*1000000)+(b*1000)+c;
+ }
+-- 
+1.7.2.3
+

Copied: mdadm/repos/testing-x86_64/mdadm-fix-udev-rules.patch (from rev 227430, mdadm/trunk/mdadm-fix-udev-rules.patch)
===================================================================
--- testing-x86_64/mdadm-fix-udev-rules.patch	                        (rev 0)
+++ testing-x86_64/mdadm-fix-udev-rules.patch	2014-12-11 08:49:55 UTC (rev 227431)
@@ -0,0 +1,137 @@
+diff --git a/Makefile b/Makefile
+index b6edb23..bedef96 100644
+--- a/Makefile
++++ b/Makefile
+@@ -253,8 +253,9 @@
+ 	$(INSTALL) -D -m 644 md.4 $(DESTDIR)$(MAN4DIR)/md.4
+ 	$(INSTALL) -D -m 644 mdadm.conf.5 $(DESTDIR)$(MAN5DIR)/mdadm.conf.5
+ 
+-install-udev: udev-md-raid.rules
+-	$(INSTALL) -D -m 644 udev-md-raid.rules $(DESTDIR)/lib/udev/rules.d/64-md-raid.rules
++install-udev: udev-md-raid-arrays.rules udev-md-raid-assembly.rules
++	$(INSTALL) -D -m 644 udev-md-raid-arrays.rules $(DESTDIR)/usr/lib/udev/rules.d/63-md-raid-arrays.rules
++	$(INSTALL) -D -m 644 udev-md-raid-assembly.rules $(DESTDIR)/usr/lib/udev/rules.d/64-md-raid-assembly.rules
+ 
+ uninstall:
+ 	rm -f $(DESTDIR)$(MAN8DIR)/mdadm.8 $(DESTDIR)$(MAN8DIR)/mdmon.8 $(DESTDIR)$(MAN4DIR)/md.4 $(DESTDIR)$(MAN5DIR)/mdadm.conf.5 $(DESTDIR)$(BINDIR)/mdadm
+diff --git a/udev-md-raid-arrays.rules b/udev-md-raid-arrays.rules
+new file mode 100644
+index 0000000..883ee4d
+--- /dev/null
++++ b/udev-md-raid-arrays.rules
+@@ -0,0 +1,35 @@
++# do not edit this file, it will be overwritten on update
++
++SUBSYSTEM!="block", GOTO="md_end"
++
++# handle md arrays
++ACTION!="add|change", GOTO="md_end"
++KERNEL!="md*", GOTO="md_end"
++
++# partitions have no md/{array_state,metadata_version}, but should not
++# for that reason be ignored.
++ENV{DEVTYPE}=="partition", GOTO="md_ignore_state"
++
++# container devices have a metadata version of e.g. 'external:ddf' and
++# never leave state 'inactive'
++ATTR{md/metadata_version}=="external:[A-Za-z]*", ATTR{md/array_state}=="inactive", GOTO="md_ignore_state"
++TEST!="md/array_state", ENV{SYSTEMD_READY}="0", GOTO="md_end"
++ATTR{md/array_state}=="|clear|inactive", ENV{SYSTEMD_READY}="0", GOTO="md_end"
++LABEL="md_ignore_state"
++
++IMPORT{program}="/usr/bin/mdadm --detail --export $devnode"
++ENV{DEVTYPE}=="disk", ENV{MD_NAME}=="?*", SYMLINK+="disk/by-id/md-name-$env{MD_NAME}", OPTIONS+="string_escape=replace"
++ENV{DEVTYPE}=="disk", ENV{MD_UUID}=="?*", SYMLINK+="disk/by-id/md-uuid-$env{MD_UUID}"
++ENV{DEVTYPE}=="disk", ENV{MD_DEVNAME}=="?*", SYMLINK+="md/$env{MD_DEVNAME}"
++ENV{DEVTYPE}=="partition", ENV{MD_NAME}=="?*", SYMLINK+="disk/by-id/md-name-$env{MD_NAME}-part%n", OPTIONS+="string_escape=replace"
++ENV{DEVTYPE}=="partition", ENV{MD_UUID}=="?*", SYMLINK+="disk/by-id/md-uuid-$env{MD_UUID}-part%n"
++ENV{DEVTYPE}=="partition", ENV{MD_DEVNAME}=="*[^0-9]", SYMLINK+="md/$env{MD_DEVNAME}%n"
++ENV{DEVTYPE}=="partition", ENV{MD_DEVNAME}=="*[0-9]", SYMLINK+="md/$env{MD_DEVNAME}p%n"
++
++IMPORT{builtin}="blkid"
++OPTIONS+="link_priority=100"
++OPTIONS+="watch"
++ENV{ID_FS_USAGE}=="filesystem|other|crypto", ENV{ID_FS_UUID_ENC}=="?*", SYMLINK+="disk/by-uuid/$env{ID_FS_UUID_ENC}"
++ENV{ID_FS_USAGE}=="filesystem|other", ENV{ID_FS_LABEL_ENC}=="?*", SYMLINK+="disk/by-label/$env{ID_FS_LABEL_ENC}"
++
++LABEL="md_end"
+diff --git a/udev-md-raid-assembly.rules b/udev-md-raid-assembly.rules
+new file mode 100644
+index 0000000..b89775e
+--- /dev/null
++++ b/udev-md-raid-assembly.rules
+@@ -0,0 +1,19 @@
++# do not edit this file, it will be overwritten on update
++
++# assemble md arrays
++
++SUBSYSTEM!="block", GOTO="md_inc_end"
++
++# handle potential components of arrays (the ones supported by md)
++ENV{ID_FS_TYPE}=="ddf_raid_member|isw_raid_member|linux_raid_member", GOTO="md_inc"
++GOTO="md_inc_end"
++
++LABEL="md_inc"
++
++# remember you can limit what gets auto/incrementally assembled by
++# mdadm.conf(5)'s 'AUTO' and selectively whitelist using 'ARRAY'
++ACTION=="add", RUN+="/usr/bin/mdadm --incremental $devnode --offroot"
++ACTION=="remove", ENV{ID_PATH}=="?*", RUN+="/usr/bin/mdadm -If $name --path $env{ID_PATH}"
++ACTION=="remove", ENV{ID_PATH}!="?*", RUN+="/usr/bin/mdadm -If $name"
++
++LABEL="md_inc_end"
+diff --git a/udev-md-raid.rules b/udev-md-raid.rules
+deleted file mode 100644
+index cc7f5ef..0000000
+--- a/udev-md-raid.rules
++++ /dev/null
+@@ -1,49 +0,0 @@
+-# do not edit this file, it will be overwritten on update
+-
+-SUBSYSTEM!="block", GOTO="md_end"
+-
+-# handle potential components of arrays (the ones supported by md)
+-ENV{ID_FS_TYPE}=="ddf_raid_member|isw_raid_member|linux_raid_member", GOTO="md_inc"
+-GOTO="md_inc_skip"
+-
+-LABEL="md_inc"
+-
+-# remember you can limit what gets auto/incrementally assembled by
+-# mdadm.conf(5)'s 'AUTO' and selectively whitelist using 'ARRAY'
+-ACTION=="add", RUN+="/sbin/mdadm --incremental $tempnode --offroot"
+-ACTION=="remove", ENV{ID_PATH}=="?*", RUN+="/sbin/mdadm -If $name --path $env{ID_PATH}"
+-ACTION=="remove", ENV{ID_PATH}!="?*", RUN+="/sbin/mdadm -If $name"
+-
+-LABEL="md_inc_skip"
+-
+-# handle md arrays
+-ACTION!="add|change", GOTO="md_end"
+-KERNEL!="md*", GOTO="md_end"
+-
+-# partitions have no md/{array_state,metadata_version}, but should not
+-# for that reason be ignored.
+-ENV{DEVTYPE}=="partition", GOTO="md_ignore_state"
+-
+-# container devices have a metadata version of e.g. 'external:ddf' and
+-# never leave state 'inactive'
+-ATTR{md/metadata_version}=="external:[A-Za-z]*", ATTR{md/array_state}=="inactive", GOTO="md_ignore_state"
+-TEST!="md/array_state", ENV{SYSTEMD_READY}="0", GOTO="md_end"
+-ATTR{md/array_state}=="|clear|inactive", ENV{SYSTEMD_READY}="0", GOTO="md_end"
+-LABEL="md_ignore_state"
+-
+-IMPORT{program}="/sbin/mdadm --detail --export $tempnode"
+-ENV{DEVTYPE}=="disk", ENV{MD_NAME}=="?*", SYMLINK+="disk/by-id/md-name-$env{MD_NAME}", OPTIONS+="string_escape=replace"
+-ENV{DEVTYPE}=="disk", ENV{MD_UUID}=="?*", SYMLINK+="disk/by-id/md-uuid-$env{MD_UUID}"
+-ENV{DEVTYPE}=="disk", ENV{MD_DEVNAME}=="?*", SYMLINK+="md/$env{MD_DEVNAME}"
+-ENV{DEVTYPE}=="partition", ENV{MD_NAME}=="?*", SYMLINK+="disk/by-id/md-name-$env{MD_NAME}-part%n", OPTIONS+="string_escape=replace"
+-ENV{DEVTYPE}=="partition", ENV{MD_UUID}=="?*", SYMLINK+="disk/by-id/md-uuid-$env{MD_UUID}-part%n"
+-ENV{DEVTYPE}=="partition", ENV{MD_DEVNAME}=="*[^0-9]", SYMLINK+="md/$env{MD_DEVNAME}%n"
+-ENV{DEVTYPE}=="partition", ENV{MD_DEVNAME}=="*[0-9]", SYMLINK+="md/$env{MD_DEVNAME}p%n"
+-
+-IMPORT{program}="/sbin/blkid -o udev -p $tempnode"
+-OPTIONS+="link_priority=100"
+-OPTIONS+="watch"
+-ENV{ID_FS_USAGE}=="filesystem|other|crypto", ENV{ID_FS_UUID_ENC}=="?*", SYMLINK+="disk/by-uuid/$env{ID_FS_UUID_ENC}"
+-ENV{ID_FS_USAGE}=="filesystem|other", ENV{ID_FS_LABEL_ENC}=="?*", SYMLINK+="disk/by-label/$env{ID_FS_LABEL_ENC}"
+-
+-LABEL="md_end"

Copied: mdadm/repos/testing-x86_64/mdadm.conf (from rev 227430, mdadm/trunk/mdadm.conf)
===================================================================
--- testing-x86_64/mdadm.conf	                        (rev 0)
+++ testing-x86_64/mdadm.conf	2014-12-11 08:49:55 UTC (rev 227431)
@@ -0,0 +1,67 @@
+# mdadm configuration file
+#
+# mdadm will function properly without the use of a configuration file,
+# but this file is useful for keeping track of arrays and member disks.
+# In general, a mdadm.conf file is created, and updated, after arrays
+# are created. This is the opposite behavior of /etc/raidtab which is
+# created prior to array construction.
+#
+#
+# the config file takes two types of lines:
+#
+#	DEVICE lines specify a list of devices of where to look for
+#	  potential member disks
+#
+#	ARRAY lines specify information about how to identify arrays so
+#	  so that they can be activated
+#
+
+
+# You can have more than one device line and use wild cards. The first 
+# example includes SCSI the first partition of SCSI disks /dev/sdb,
+# /dev/sdc, /dev/sdd, /dev/sdj, /dev/sdk, and /dev/sdl. The second 
+# line looks for array slices on IDE disks.
+#
+#DEVICE /dev/sd[bcdjkl]1
+#DEVICE /dev/hda1 /dev/hdb1
+#
+# The designation "partitions" will scan all partitions found in
+# /proc/partitions
+DEVICE partitions
+
+
+# ARRAY lines specify an array to assemble and a method of identification.
+# Arrays can currently be identified by using a UUID, superblock minor number,
+# or a listing of devices.
+#
+#	super-minor is usually the minor number of the metadevice
+#	UUID is the Universally Unique Identifier for the array
+# Each can be obtained using
+#
+# 	mdadm -D <md>
+#
+# To capture the UUIDs for all your RAID arrays to this file, run these:
+#    to get a list of running arrays:
+#    # mdadm -D --scan >>/etc/mdadm.conf
+#    to get a list from superblocks:
+#    # mdadm -E --scan >>/etc/mdadm.conf
+#
+#ARRAY /dev/md0 UUID=3aaa0122:29827cfa:5331ad66:ca767371
+#ARRAY /dev/md1 super-minor=1
+#ARRAY /dev/md2 devices=/dev/hda1,/dev/hdb1
+#
+# ARRAY lines can also specify a "spare-group" for each array.  mdadm --monitor
+# will then move a spare between arrays in a spare-group if one array has a
+# failed drive but no spare
+#ARRAY /dev/md4 uuid=b23f3c6d:aec43a9f:fd65db85:369432df spare-group=group1
+#ARRAY /dev/md5 uuid=19464854:03f71b1b:e0df2edd:246cc977 spare-group=group1
+#
+
+
+# When used in --follow (aka --monitor) mode, mdadm needs a
+# mail address and/or a program.  To start mdadm's monitor mode, enable
+# mdadm.service in systemd.
+#
+# If the lines are not found, mdadm will exit quietly
+#MAILADDR root at mydomain.tld
+#PROGRAM /usr/sbin/handle-mdadm-events

Copied: mdadm/repos/testing-x86_64/mdadm.service (from rev 227430, mdadm/trunk/mdadm.service)
===================================================================
--- testing-x86_64/mdadm.service	                        (rev 0)
+++ testing-x86_64/mdadm.service	2014-12-11 08:49:55 UTC (rev 227431)
@@ -0,0 +1,8 @@
+[Unit]
+Description=MDADM Event Monitor
+
+[Service]
+ExecStart=/usr/bin/mdadm --monitor --scan
+
+[Install]
+WantedBy=multi-user.target

Copied: mdadm/repos/testing-x86_64/mdadm_hook (from rev 227430, mdadm/trunk/mdadm_hook)
===================================================================
--- testing-x86_64/mdadm_hook	                        (rev 0)
+++ testing-x86_64/mdadm_hook	2014-12-11 08:49:55 UTC (rev 227431)
@@ -0,0 +1,49 @@
+#!/usr/bin/ash
+
+run_hook() {
+    local i= mdconfig=/etc/mdadm.conf
+
+    # for partitionable raid, we need to load md_mod first!
+    modprobe md_mod 2>/dev/null
+
+    if [ -n "$md" ]; then
+        echo 'DEVICE partitions' >"$mdconfig"
+        for i in $(cat /proc/cmdline); do
+            case $i in
+                # raid
+                md=[0-9]*,/*)
+                    device=${i%%,*}
+                    device=${device/=/}
+                    array=${i#*,}
+                    echo "ARRAY /dev/$device devices=$array"
+                    ;;
+                # partitionable raid
+                md=d[0-9]*,/*)
+                    device=${i%%,*}
+                    device=${device/=/_}
+                    array=${i#*,}
+                    echo "ARRAY /dev/$device devices=$array"
+                    ;;
+                # raid UUID
+                md=[0-9]*,[0-9,a-fA-F]*)
+                    device=${i%%,*}
+                    device=${device/=/}
+                    array=${i#*,}
+                    echo "ARRAY /dev/$device UUID=$array"
+                    ;;
+                # partitionable raid UUID
+                md=d[0-9]*,[0-9,a-fA-F]*)
+                    device=${i%%,*}
+                    device=${device/=/_}
+                    array=${i#*,}
+                    echo "ARRAY /dev/$device UUID=$array"
+                    ;;
+            esac
+        done >>"$mdconfig"
+    fi
+
+    # assemble everything
+    [ -s "$mdconfig" ] && /usr/bin/mdassemble
+}
+
+# vim: set ft=sh ts=4 sw=4 et:

Copied: mdadm/repos/testing-x86_64/mdadm_install (from rev 227430, mdadm/trunk/mdadm_install)
===================================================================
--- testing-x86_64/mdadm_install	                        (rev 0)
+++ testing-x86_64/mdadm_install	2014-12-11 08:49:55 UTC (rev 227431)
@@ -0,0 +1,46 @@
+#!/bin/bash
+
+build() {
+    add_checked_modules -f 'dm-' 'drivers/md/*'
+
+    # check if a custom mdadm.conf exists
+    if grep -q ^ARRAY /etc/mdadm.conf; then
+        echo "Custom /etc/mdadm.conf file will be used in initramfs for assembling arrays."
+        add_file "/etc/mdadm.conf"
+    fi
+    add_binary "/usr/bin/mdassemble"
+    add_file "/usr/lib/udev/rules.d/63-md-raid-arrays.rules"
+
+    add_runscript
+}
+
+help() {
+  cat <<HELPEOF
+This hook loads the necessary modules for any raid root device,
+and assembles the raid device when run.
+
+If arrays are defined in /etc/mdadm.conf, the file will be used instead
+of command line assembling.
+
+Command Line Setup:
+- for raid arrays with persistent superblocks:
+  md=<md device no.>,dev0,dev1,...,devn
+  md=<md device no.>,uuid
+- for partitionable raid arrays with persistent superblocks:
+  md=d<md device no.>,dev0,dev1,...,devn
+  md=d<md device no.>,uuid
+
+Parameters:
+- <md device no.> = the number of the md device: 
+  0 means md0, 1 means md1, ...
+- <dev0-devn>: e.g. /dev/hda1,/dev/hdc1,/dev/sda1,/dev/sdb1
+                 or 0900878d:f95f6057:c39a36e9:55efa60a
+Examples:
+- md=d0,/dev/sda3,/dev/sda4 md=d1,/dev/hda1,/dev/hdb1
+  This will setup 2 md partitionable arrays.
+- md=0,/dev/sda3,/dev/sda4 md=1,/dev/hda1,/dev/hdb1
+  This will setup 2 md arrays with persistent superblocks.
+HELPEOF
+}
+
+# vim: set ft=sh ts=4 sw=4 et:

Copied: mdadm/repos/testing-x86_64/mdadm_udev_install (from rev 227430, mdadm/trunk/mdadm_udev_install)
===================================================================
--- testing-x86_64/mdadm_udev_install	                        (rev 0)
+++ testing-x86_64/mdadm_udev_install	2014-12-11 08:49:55 UTC (rev 227431)
@@ -0,0 +1,25 @@
+#!/bin/bash
+
+build() {
+    add_checked_modules -f 'dm-' 'drivers/md/*'
+
+    # check if a custom mdadm.conf exists
+    if grep -qw ^ARRAY "$BASEDIR/etc/mdadm.conf"; then
+        echo "Custom /etc/mdadm.conf file will be used in initramfs for assembling arrays."
+        add_file "/etc/mdadm.conf"
+    fi
+
+    add_binary "/usr/bin/mdadm"
+    add_file "/usr/lib/udev/rules.d/63-md-raid-arrays.rules"
+    add_file "/usr/lib/udev/rules.d/64-md-raid-assembly.rules"
+}
+
+help() {
+  cat <<HELPEOF
+This hook loads the necessary modules for a RAID array and uses incremental
+assembly via udev at runtime to create the devices. This hook will NOT work
+without the udev hook included on the image.
+HELPEOF
+}
+
+# vim: set ft=sh ts=4 sw=4 et:



More information about the arch-commits mailing list