[arch-commits] Commit in systemd/repos (12 files)
Dave Reisner
dreisner at nymeria.archlinux.org
Wed Mar 12 01:11:27 UTC 2014
Date: Wednesday, March 12, 2014 @ 02:11:27
Author: dreisner
Revision: 207522
archrelease: copy trunk to testing-i686, testing-x86_64
Added:
systemd/repos/testing-i686/
systemd/repos/testing-i686/PKGBUILD
(from rev 207521, systemd/trunk/PKGBUILD)
systemd/repos/testing-i686/initcpio-hook-udev
(from rev 207521, systemd/trunk/initcpio-hook-udev)
systemd/repos/testing-i686/initcpio-install-systemd
(from rev 207521, systemd/trunk/initcpio-install-systemd)
systemd/repos/testing-i686/initcpio-install-udev
(from rev 207521, systemd/trunk/initcpio-install-udev)
systemd/repos/testing-i686/systemd.install
(from rev 207521, systemd/trunk/systemd.install)
systemd/repos/testing-x86_64/
systemd/repos/testing-x86_64/PKGBUILD
(from rev 207521, systemd/trunk/PKGBUILD)
systemd/repos/testing-x86_64/initcpio-hook-udev
(from rev 207521, systemd/trunk/initcpio-hook-udev)
systemd/repos/testing-x86_64/initcpio-install-systemd
(from rev 207521, systemd/trunk/initcpio-install-systemd)
systemd/repos/testing-x86_64/initcpio-install-udev
(from rev 207521, systemd/trunk/initcpio-install-udev)
systemd/repos/testing-x86_64/systemd.install
(from rev 207521, systemd/trunk/systemd.install)
-----------------------------------------+
testing-i686/PKGBUILD | 150 ++++++++++++++++++++++++++++
testing-i686/initcpio-hook-udev | 22 ++++
testing-i686/initcpio-install-systemd | 159 ++++++++++++++++++++++++++++++
testing-i686/initcpio-install-udev | 29 +++++
testing-i686/systemd.install | 145 +++++++++++++++++++++++++++
testing-x86_64/PKGBUILD | 150 ++++++++++++++++++++++++++++
testing-x86_64/initcpio-hook-udev | 22 ++++
testing-x86_64/initcpio-install-systemd | 159 ++++++++++++++++++++++++++++++
testing-x86_64/initcpio-install-udev | 29 +++++
testing-x86_64/systemd.install | 145 +++++++++++++++++++++++++++
10 files changed, 1010 insertions(+)
Copied: systemd/repos/testing-i686/PKGBUILD (from rev 207521, systemd/trunk/PKGBUILD)
===================================================================
--- testing-i686/PKGBUILD (rev 0)
+++ testing-i686/PKGBUILD 2014-03-12 01:11:27 UTC (rev 207522)
@@ -0,0 +1,150 @@
+# Maintainer: Dave Reisner <dreisner at archlinux.org>
+# Maintainer: Tom Gundersen <teg at jklm.no>
+
+pkgbase=systemd
+pkgname=('systemd' 'libsystemd' 'systemd-sysvcompat')
+pkgver=211
+pkgrel=1
+arch=('i686' 'x86_64')
+url="http://www.freedesktop.org/wiki/Software/systemd"
+makedepends=('acl' 'cryptsetup' 'docbook-xsl' 'gobject-introspection' 'gperf'
+ 'gtk-doc' 'intltool' 'kmod' 'libcap' 'libgcrypt' 'libmicrohttpd' 'libxslt'
+ 'libutil-linux' 'linux-api-headers' 'pam' 'python' 'python-lxml' 'quota-tools' 'xz')
+options=('strip' 'debug')
+source=("http://www.freedesktop.org/software/$pkgname/$pkgname-$pkgver.tar.xz"
+ 'initcpio-hook-udev'
+ 'initcpio-install-systemd'
+ 'initcpio-install-udev')
+md5sums=('0a70c382b6089526f98073b4ee85ef75'
+ '29245f7a240bfba66e2b1783b63b6b40'
+ '5e04f468a13ae2b9d6a9dfc77c49a7d1'
+ 'bde43090d4ac0ef048e3eaee8202a407')
+
+build() {
+ cd "$pkgname-$pkgver"
+
+ ./configure \
+ --libexecdir=/usr/lib \
+ --localstatedir=/var \
+ --sysconfdir=/etc \
+ --enable-introspection \
+ --enable-gtk-doc \
+ --enable-compat-libs \
+ --disable-audit \
+ --disable-ima \
+ --disable-kdbus \
+ --with-sysvinit-path= \
+ --with-sysvrcnd-path= \
+ --with-firmware-path="/usr/lib/firmware/updates:/usr/lib/firmware"
+
+ make
+}
+
+check() {
+ make -C "$pkgname-$pkgver" check || :
+}
+
+package_systemd() {
+ pkgdesc="system and service manager"
+ license=('GPL2' 'LGPL2.1' 'MIT')
+ depends=('acl' 'bash' 'dbus' 'glib2' 'kbd' 'kmod' 'hwids' 'libcap' 'libgcrypt'
+ 'libsystemd' 'pam' 'libseccomp' 'libutil-linux' 'xz')
+ provides=('nss-myhostname' "systemd-tools=$pkgver" "udev=$pkgver")
+ replaces=('nss-myhostname' 'systemd-tools' 'udev')
+ conflicts=('nss-myhostname' 'systemd-tools' 'udev')
+ optdepends=('python: systemd library bindings'
+ 'cryptsetup: required for encrypted block devices'
+ 'libmicrohttpd: systemd-journal-gatewayd'
+ 'quota-tools: kernel-level quota management'
+ 'systemd-sysvcompat: symlink package to provide sysvinit binaries')
+ backup=(etc/dbus-1/system.d/org.freedesktop.systemd1.conf
+ etc/dbus-1/system.d/org.freedesktop.hostname1.conf
+ etc/dbus-1/system.d/org.freedesktop.login1.conf
+ etc/dbus-1/system.d/org.freedesktop.locale1.conf
+ etc/dbus-1/system.d/org.freedesktop.machine1.conf
+ etc/dbus-1/system.d/org.freedesktop.timedate1.conf
+ etc/pam.d/systemd-user
+ etc/systemd/bootchart.conf
+ etc/systemd/journald.conf
+ etc/systemd/logind.conf
+ etc/systemd/system.conf
+ etc/systemd/user.conf
+ etc/udev/udev.conf)
+ install="systemd.install"
+
+ make -C "$pkgname-$pkgver" DESTDIR="$pkgdir" install
+
+ # don't write units to /etc by default -- we'll enable the getty on
+ # post_install as a sane default.
+ rm "$pkgdir/etc/systemd/system/getty.target.wants/getty at tty1.service"
+ rm "$pkgdir/etc/systemd/system/multi-user.target.wants/systemd-networkd.service"
+ rmdir "$pkgdir/etc/systemd/system/getty.target.wants"
+
+ # get rid of RPM macros
+ rm -r "$pkgdir/usr/lib/rpm"
+
+ # add back tmpfiles.d/legacy.conf
+ install -m644 "systemd-$pkgver/tmpfiles.d/legacy.conf" "$pkgdir/usr/lib/tmpfiles.d"
+
+ # Replace dialout/tape/cdrom group in rules with uucp/storage/optical group
+ sed -i 's#GROUP="dialout"#GROUP="uucp"#g;
+ s#GROUP="tape"#GROUP="storage"#g;
+ s#GROUP="cdrom"#GROUP="optical"#g' "$pkgdir"/usr/lib/udev/rules.d/*.rules
+
+ # add mkinitcpio hooks
+ install -Dm644 "$srcdir/initcpio-install-systemd" "$pkgdir/usr/lib/initcpio/install/systemd"
+ install -Dm644 "$srcdir/initcpio-install-udev" "$pkgdir/usr/lib/initcpio/install/udev"
+ install -Dm644 "$srcdir/initcpio-hook-udev" "$pkgdir/usr/lib/initcpio/hooks/udev"
+
+ # ensure proper permissions for /var/log/journal
+ chown root:systemd-journal "$pkgdir/var/log/journal"
+ chmod 2755 "$pkgdir/var/log/journal"
+
+ # fix pam file
+ sed 's|system-auth|system-login|g' -i "$pkgdir/etc/pam.d/systemd-user"
+
+ ### split out manpages for sysvcompat
+ rm -rf "$srcdir/_sysvcompat"
+ install -dm755 "$srcdir"/_sysvcompat/usr/share/man/man8/
+ mv "$pkgdir"/usr/share/man/man8/{telinit,halt,reboot,poweroff,runlevel,shutdown}.8 \
+ "$srcdir"/_sysvcompat/usr/share/man/man8
+
+ ### split off runtime libraries
+ rm -rf "$srcdir/_libsystemd"
+ install -dm755 "$srcdir"/_libsystemd/usr/lib
+ cd "$srcdir"/_libsystemd
+ mv "$pkgdir"/usr/lib/lib{systemd,{g,}udev}*.so* usr/lib
+
+ # include MIT license, since it's technically custom
+ install -Dm644 "$srcdir/$pkgname-$pkgver/LICENSE.MIT" \
+ "$pkgdir/usr/share/licenses/systemd/LICENSE.MIT"
+}
+
+package_libsystemd() {
+ pkgdesc="systemd client libraries"
+ depends=('glib2' 'glibc' 'libgcrypt' 'xz')
+ license=('GPL2')
+ provides=('libgudev-1.0.so' 'libsystemd.so' 'libsystemd-daemon.so' 'libsystemd-id128.so'
+ 'libsystemd-journal.so' 'libsystemd-login.so' 'libudev.so')
+
+ mv "$srcdir/_libsystemd"/* "$pkgdir"
+}
+
+package_systemd-sysvcompat() {
+ pkgdesc="sysvinit compat for systemd"
+ license=('GPL2')
+ groups=('base')
+ conflicts=('sysvinit')
+ depends=('systemd')
+
+ mv "$srcdir/_sysvcompat"/* "$pkgdir"
+
+ install -dm755 "$pkgdir/usr/bin"
+ for tool in runlevel reboot shutdown poweroff halt telinit; do
+ ln -s 'systemctl' "$pkgdir/usr/bin/$tool"
+ done
+
+ ln -s '../lib/systemd/systemd' "$pkgdir/usr/bin/init"
+}
+
+# vim: ft=sh syn=sh et
Copied: systemd/repos/testing-i686/initcpio-hook-udev (from rev 207521, systemd/trunk/initcpio-hook-udev)
===================================================================
--- testing-i686/initcpio-hook-udev (rev 0)
+++ testing-i686/initcpio-hook-udev 2014-03-12 01:11:27 UTC (rev 207522)
@@ -0,0 +1,22 @@
+#!/usr/bin/ash
+
+run_earlyhook() {
+ kmod static-nodes --format=tmpfiles --output=/run/tmpfiles.d/kmod.conf
+ systemd-tmpfiles --prefix=/dev --create
+ /usr/lib/systemd/systemd-udevd --daemon --resolve-names=never
+ udevd_running=1
+}
+
+run_hook() {
+ msg ":: Triggering uevents..."
+ udevadm trigger --action=add --type=subsystems
+ udevadm trigger --action=add --type=devices
+ udevadm settle
+}
+
+run_cleanuphook() {
+ udevadm control --exit
+ udevadm info --cleanup-db
+}
+
+# vim: set ft=sh ts=4 sw=4 et:
Copied: systemd/repos/testing-i686/initcpio-install-systemd (from rev 207521, systemd/trunk/initcpio-install-systemd)
===================================================================
--- testing-i686/initcpio-install-systemd (rev 0)
+++ testing-i686/initcpio-install-systemd 2014-03-12 01:11:27 UTC (rev 207522)
@@ -0,0 +1,159 @@
+#!/bin/bash
+
+strip_quotes() {
+ local len=${#1} quotes=$'[\'"]' str=${!1}
+
+ if [[ ${str:0:1} = ${str: -1} && ${str:0:1} = $quotes ]]; then
+ printf -v "$1" %s "${str:1:-1}"
+ fi
+}
+
+add_udev_rule() {
+ # Add an udev rules file to the initcpio image. Dependencies on binaries
+ # will be discovered and added.
+ # $1: path to rules file (or name of rules file)
+
+ local rules= rule= key= value= binary=
+
+ rules=$(PATH=/usr/lib/udev/rules.d:/lib/udev/rules.d type -P "$1")
+ if [[ -z $rules ]]; then
+ # complain about not found rules
+ return 1
+ fi
+
+ add_file "$rules"
+
+ while IFS=, read -ra rule; do
+ # skip empty lines, comments
+ [[ -z $rule || $rule = @(+([[:space:]])|#*) ]] && continue
+
+ for pair in "${rule[@]}"; do
+ IFS=' =' read -r key value <<< "$pair"
+ case $key in
+ RUN@({program}|+)|IMPORT{program}|ENV{REMOVE_CMD})
+ strip_quotes 'value'
+ # just take the first word as the binary name
+ binary=${value%% *}
+ if [[ ${binary:0:1} != '/' ]]; then
+ binary=$(PATH=/usr/lib/udev:/lib/udev type -P "$binary")
+ fi
+ add_binary "$binary"
+ ;;
+ esac
+ done
+ done <"$rules"
+}
+
+add_systemd_unit() {
+ # Add a systemd unit file to the initcpio image. Hard dependencies on binaries
+ # and other unit files will be discovered and added.
+ # $1: path to rules file (or name of rules file)
+
+ local unit= rule= entry= key= value= binary= dep=
+
+ unit=$(PATH=/usr/lib/systemd/system:/lib/systemd/system type -P "$1")
+ if [[ -z $unit ]]; then
+ # complain about not found unit file
+ return 1
+ fi
+
+ add_file "$unit"
+
+ while IFS='=' read -r key values; do
+ read -ra values <<< "$values"
+
+ case $key in
+ Requires|OnFailure)
+ # only add hard dependencies (not Wants)
+ map add_systemd_unit "${values[@]}"
+ ;;
+ Exec*)
+ # don't add binaries unless they are required
+ if [[ ${values[0]:0:1} != '-' ]]; then
+ add_binary "${values[0]}"
+ fi
+ ;;
+ esac
+
+ done <"$unit"
+
+ # preserve reverse soft dependency
+ for dep in {/usr,}/lib/systemd/system/*.wants/${unit##*/}; do
+ if [[ -L $dep ]]; then
+ add_symlink "$dep"
+ fi
+ done
+
+ # add hard dependencies
+ if [[ -d $unit.requires ]]; then
+ for dep in "$unit".requires/*; do
+ add_systemd_unit ${dep##*/}
+ done
+ fi
+}
+
+build() {
+ local rules unit
+
+ # from base
+ add_binary /bin/mount
+ add_binary /usr/bin/kmod /usr/bin/modprobe
+
+ # systemd
+ add_binary /usr/lib/systemd/systemd /init
+ add_binary /usr/bin/systemd-tmpfiles
+
+ # generate sysroot.mount and sysroot-usr.mount
+ add_file "/usr/lib/systemd/system-generators/systemd-fstab-generator"
+
+ # udev rules and systemd units
+ map add_udev_rule "$rules" \
+ 50-udev-default.rules \
+ 60-persistent-storage.rules \
+ 64-btrfs.rules \
+ 80-drivers.rules \
+ 99-systemd.rules \
+
+ map add_systemd_unit \
+ ctrl-alt-del.target \
+ initrd-cleanup.service \
+ initrd-fs.target \
+ initrd-parse-etc.service \
+ initrd-root-fs.target \
+ initrd-switch-root.service \
+ initrd-switch-root.target \
+ initrd-udevadm-cleanup-db.service \
+ initrd.target \
+ kmod-static-nodes.service \
+ sockets.target \
+ systemd-fsck at .service \
+ systemd-journald.service \
+ systemd-tmpfiles-setup-dev.service \
+ systemd-udev-trigger.service \
+ systemd-udevd-control.socket \
+ systemd-udevd-kernel.socket \
+ systemd-udevd.service
+
+ add_symlink "/usr/lib/systemd/system/default.target" "initrd.target"
+
+ # libdbus needs the passwd info of the root user
+ # TODO: make sure this is no longer necessary when systemctl moves to sd-bus
+ add_file "/etc/nsswitch.conf"
+ add_file "/etc/passwd"
+ add_binary "$(readlink -f /usr/lib/libnss_files.so)"
+
+ # udev wants /etc/group since it doesn't launch with --resolve-names=never
+ add_file "/etc/group"
+}
+
+help() {
+ cat <<HELPEOF
+This will install a basic systemd setup in your initramfs, and is meant to
+replace the 'base', 'usr', 'udev' and 'timestamp' hooks. Other hooks with runtime
+components will need to be ported, and will not work as intended. You also may
+wish to still include the 'base' hook (before this hook) to ensure that a
+rescue shell exists on your initramfs.
+HELPEOF
+}
+
+# vim: set ft=sh ts=4 sw=4 et:
Copied: systemd/repos/testing-i686/initcpio-install-udev (from rev 207521, systemd/trunk/initcpio-install-udev)
===================================================================
--- testing-i686/initcpio-install-udev (rev 0)
+++ testing-i686/initcpio-install-udev 2014-03-12 01:11:27 UTC (rev 207522)
@@ -0,0 +1,29 @@
+#!/bin/bash
+
+build() {
+ local rules tool
+
+ add_file "/etc/udev/udev.conf"
+ add_binary /usr/lib/systemd/systemd-udevd
+ add_binary /usr/bin/udevadm
+ add_binary /usr/bin/systemd-tmpfiles
+
+ for rules in 50-udev-default.rules 60-persistent-storage.rules 64-btrfs.rules 80-drivers.rules; do
+ add_file "/usr/lib/udev/rules.d/$rules"
+ done
+ for tool in ata_id scsi_id; do
+ add_file "/usr/lib/udev/$tool"
+ done
+
+ add_runscript
+}
+
+help() {
+ cat <<HELPEOF
+This hook will use udev to create your root device node and detect the needed
+modules for your root device. It is also required for firmware loading in
+initramfs. It is recommended to use this hook.
+HELPEOF
+}
+
+# vim: set ft=sh ts=4 sw=4 et:
Copied: systemd/repos/testing-i686/systemd.install (from rev 207521, systemd/trunk/systemd.install)
===================================================================
--- testing-i686/systemd.install (rev 0)
+++ testing-i686/systemd.install 2014-03-12 01:11:27 UTC (rev 207522)
@@ -0,0 +1,145 @@
+#!/bin/sh
+
+sd_booted() {
+ [ -d /run/systemd/system ]
+}
+
+add_privs() {
+ if ! setcap "$2" "$1" 2>/dev/null; then
+ echo "==> Warning: setcap failed, falling back to setuid root on /$1"
+ chmod u+s "$1"
+ fi
+}
+
+add_journal_acls() {
+ # ignore errors, since the filesystem might not support ACLs
+ setfacl -Rnm g:wheel:rx,d:g:wheel:rx,g:adm:rx,d:g:adm:rx /var/log/journal/ 2>/dev/null
+ :
+}
+
+maybe_reexec() {
+ # don't reexec on 209-1 upgrade due to large infrastructural changes.
+ if [ "$(vercmp 209-1 "$2")" -eq 1 ]; then
+ echo ':: systemd has not been reexecuted. It is recommended that you'
+ echo ' reboot at your earliest convenience.'
+ return
+ fi
+
+ if sd_booted; then
+ systemctl --system daemon-reexec
+ fi
+}
+
+_dir_empty() {
+ set -- "$1"/*
+ [ ! -e "$1" ] && [ ! -L "$1" ]
+}
+
+post_common() {
+ systemd-machine-id-setup
+
+ add_privs usr/bin/systemd-detect-virt 'cap_dac_override,cap_sys_ptrace+ep'
+
+ udevadm hwdb --update
+ journalctl --update-catalog
+}
+
+_208_changes() {
+ chown root:systemd-journal var/log/journal
+ chmod 2755 var/log/journal
+
+ if [ -e var/lib/backlight ] && [ ! -e var/lib/systemd/backlight ]; then
+ mv -T var/lib/backlight var/lib/systemd/backlight
+ fi
+
+ if [ -e var/lib/random-seed ] && [ ! -e var/lib/systemd/random-seed ]; then
+ mv -T var/lib/random-seed var/lib/systemd/random-seed
+ fi
+}
+
+_209_changes() {
+ # attempt to preserve existing behavior
+
+ local old_rule=etc/udev/rules.d/80-net-name-slot.rules
+ local new_rule=etc/udev/rules.d/80-net-setup-link.rules
+
+ echo ":: Network device naming is now controlled by udev's net_setup_link"
+ echo " builtin. Refer to the NETWORK LINK CONFIGURATION section of the"
+ echo " udev manpage for a full description."
+
+ # not clear what action we can take here, so don't do anything
+ [[ -e $new_rule ]] && return 0
+
+ # rename the old rule to the new one so that we preserve the user's
+ # existing option.
+ if [[ -e $old_rule ]]; then
+ printf ':: Renaming %s to %s in order\n' "${old_rule##*/}" "${new_rule##*/}"
+ printf ' to preserve existing network naming behavior.\n'
+ mv -v "$old_rule" "$new_rule"
+ else
+ echo ':: No changes have been made to your network naming configuration.'
+ echo ' Interfaces should continue to maintain the same names.'
+ fi
+}
+
+_210_changes() {
+ if sd_booted; then
+ # If /etc/systemd/network is non-empty, then this is a 209 user who used
+ # networkd. Re-enable it for them.
+ if ! _dir_empty etc/systemd/network; then
+ systemctl enable systemd-networkd
+ fi
+ fi
+}
+
+post_install() {
+ post_common "$@"
+
+ add_journal_acls
+
+ # enable getty at tty1 by default, but don't track the file
+ systemctl enable getty at tty1.service
+
+ echo ":: Append 'init=/usr/lib/systemd/systemd' to your kernel command line in your"
+ echo " bootloader to replace sysvinit with systemd, or install systemd-sysvcompat"
+}
+
+post_upgrade() {
+ post_common "$@"
+
+ maybe_reexec "$@"
+
+ if [ "$(vercmp 204-1 "$2")" -eq 1 ]; then
+ printf '==> The /bin/systemd symlink has been removed. Any references in your\n'
+ printf ' bootloader (or elsewhere) must be updated to /usr/lib/systemd/systemd.\n'
+ fi
+
+ if [ "$(vercmp 205-1 "$2")" -eq 1 ]; then
+ printf '==> systemd 205 restructures the cgroup hierarchy and changes internal\n'
+ printf ' protocols. You should reboot at your earliest convenience.\n'
+ fi
+
+ if [ "$(vercmp 206-1 "$2")" -eq 1 ]; then
+ printf '==> The "timestamp" hook for mkinitcpio no longer exists. If you used\n'
+ printf ' this hook, you must remove it from /etc/mkinitcpio.conf. A "systemd"\n'
+ printf ' hook has been added which provides this functionality, and more.\n'
+ fi
+
+ if [ "$(vercmp 208-1 "$2")" -eq 1 ]; then
+ _208_changes
+ fi
+
+ if [ "$(vercmp 208-8 "$2")" -eq 1 ]; then
+ add_journal_acls
+ fi
+
+ if [ "$(vercmp 209-1 "$2")" -eq 1 ]; then
+ _209_changes
+ fi
+
+ if [ "$(vercmp 210-1 "$2")" -eq 1 ]; then
+ _210_changes
+ fi
+}
+
+# vim:set ts=2 sw=2 et:
Copied: systemd/repos/testing-x86_64/PKGBUILD (from rev 207521, systemd/trunk/PKGBUILD)
===================================================================
--- testing-x86_64/PKGBUILD (rev 0)
+++ testing-x86_64/PKGBUILD 2014-03-12 01:11:27 UTC (rev 207522)
@@ -0,0 +1,150 @@
+# Maintainer: Dave Reisner <dreisner at archlinux.org>
+# Maintainer: Tom Gundersen <teg at jklm.no>
+
+pkgbase=systemd
+pkgname=('systemd' 'libsystemd' 'systemd-sysvcompat')
+pkgver=211
+pkgrel=1
+arch=('i686' 'x86_64')
+url="http://www.freedesktop.org/wiki/Software/systemd"
+makedepends=('acl' 'cryptsetup' 'docbook-xsl' 'gobject-introspection' 'gperf'
+ 'gtk-doc' 'intltool' 'kmod' 'libcap' 'libgcrypt' 'libmicrohttpd' 'libxslt'
+ 'libutil-linux' 'linux-api-headers' 'pam' 'python' 'python-lxml' 'quota-tools' 'xz')
+options=('strip' 'debug')
+source=("http://www.freedesktop.org/software/$pkgname/$pkgname-$pkgver.tar.xz"
+ 'initcpio-hook-udev'
+ 'initcpio-install-systemd'
+ 'initcpio-install-udev')
+md5sums=('0a70c382b6089526f98073b4ee85ef75'
+ '29245f7a240bfba66e2b1783b63b6b40'
+ '5e04f468a13ae2b9d6a9dfc77c49a7d1'
+ 'bde43090d4ac0ef048e3eaee8202a407')
+
+build() {
+ cd "$pkgname-$pkgver"
+
+ ./configure \
+ --libexecdir=/usr/lib \
+ --localstatedir=/var \
+ --sysconfdir=/etc \
+ --enable-introspection \
+ --enable-gtk-doc \
+ --enable-compat-libs \
+ --disable-audit \
+ --disable-ima \
+ --disable-kdbus \
+ --with-sysvinit-path= \
+ --with-sysvrcnd-path= \
+ --with-firmware-path="/usr/lib/firmware/updates:/usr/lib/firmware"
+
+ make
+}
+
+check() {
+ make -C "$pkgname-$pkgver" check || :
+}
+
+package_systemd() {
+ pkgdesc="system and service manager"
+ license=('GPL2' 'LGPL2.1' 'MIT')
+ depends=('acl' 'bash' 'dbus' 'glib2' 'kbd' 'kmod' 'hwids' 'libcap' 'libgcrypt'
+ 'libsystemd' 'pam' 'libseccomp' 'libutil-linux' 'xz')
+ provides=('nss-myhostname' "systemd-tools=$pkgver" "udev=$pkgver")
+ replaces=('nss-myhostname' 'systemd-tools' 'udev')
+ conflicts=('nss-myhostname' 'systemd-tools' 'udev')
+ optdepends=('python: systemd library bindings'
+ 'cryptsetup: required for encrypted block devices'
+ 'libmicrohttpd: systemd-journal-gatewayd'
+ 'quota-tools: kernel-level quota management'
+ 'systemd-sysvcompat: symlink package to provide sysvinit binaries')
+ backup=(etc/dbus-1/system.d/org.freedesktop.systemd1.conf
+ etc/dbus-1/system.d/org.freedesktop.hostname1.conf
+ etc/dbus-1/system.d/org.freedesktop.login1.conf
+ etc/dbus-1/system.d/org.freedesktop.locale1.conf
+ etc/dbus-1/system.d/org.freedesktop.machine1.conf
+ etc/dbus-1/system.d/org.freedesktop.timedate1.conf
+ etc/pam.d/systemd-user
+ etc/systemd/bootchart.conf
+ etc/systemd/journald.conf
+ etc/systemd/logind.conf
+ etc/systemd/system.conf
+ etc/systemd/user.conf
+ etc/udev/udev.conf)
+ install="systemd.install"
+
+ make -C "$pkgname-$pkgver" DESTDIR="$pkgdir" install
+
+ # don't write units to /etc by default -- we'll enable the getty on
+ # post_install as a sane default.
+ rm "$pkgdir/etc/systemd/system/getty.target.wants/getty at tty1.service"
+ rm "$pkgdir/etc/systemd/system/multi-user.target.wants/systemd-networkd.service"
+ rmdir "$pkgdir/etc/systemd/system/getty.target.wants"
+
+ # get rid of RPM macros
+ rm -r "$pkgdir/usr/lib/rpm"
+
+ # add back tmpfiles.d/legacy.conf
+ install -m644 "systemd-$pkgver/tmpfiles.d/legacy.conf" "$pkgdir/usr/lib/tmpfiles.d"
+
+ # Replace dialout/tape/cdrom group in rules with uucp/storage/optical group
+ sed -i 's#GROUP="dialout"#GROUP="uucp"#g;
+ s#GROUP="tape"#GROUP="storage"#g;
+ s#GROUP="cdrom"#GROUP="optical"#g' "$pkgdir"/usr/lib/udev/rules.d/*.rules
+
+ # add mkinitcpio hooks
+ install -Dm644 "$srcdir/initcpio-install-systemd" "$pkgdir/usr/lib/initcpio/install/systemd"
+ install -Dm644 "$srcdir/initcpio-install-udev" "$pkgdir/usr/lib/initcpio/install/udev"
+ install -Dm644 "$srcdir/initcpio-hook-udev" "$pkgdir/usr/lib/initcpio/hooks/udev"
+
+ # ensure proper permissions for /var/log/journal
+ chown root:systemd-journal "$pkgdir/var/log/journal"
+ chmod 2755 "$pkgdir/var/log/journal"
+
+ # fix pam file
+ sed 's|system-auth|system-login|g' -i "$pkgdir/etc/pam.d/systemd-user"
+
+ ### split out manpages for sysvcompat
+ rm -rf "$srcdir/_sysvcompat"
+ install -dm755 "$srcdir"/_sysvcompat/usr/share/man/man8/
+ mv "$pkgdir"/usr/share/man/man8/{telinit,halt,reboot,poweroff,runlevel,shutdown}.8 \
+ "$srcdir"/_sysvcompat/usr/share/man/man8
+
+ ### split off runtime libraries
+ rm -rf "$srcdir/_libsystemd"
+ install -dm755 "$srcdir"/_libsystemd/usr/lib
+ cd "$srcdir"/_libsystemd
+ mv "$pkgdir"/usr/lib/lib{systemd,{g,}udev}*.so* usr/lib
+
+ # include MIT license, since it's technically custom
+ install -Dm644 "$srcdir/$pkgname-$pkgver/LICENSE.MIT" \
+ "$pkgdir/usr/share/licenses/systemd/LICENSE.MIT"
+}
+
+package_libsystemd() {
+ pkgdesc="systemd client libraries"
+ depends=('glib2' 'glibc' 'libgcrypt' 'xz')
+ license=('GPL2')
+ provides=('libgudev-1.0.so' 'libsystemd.so' 'libsystemd-daemon.so' 'libsystemd-id128.so'
+ 'libsystemd-journal.so' 'libsystemd-login.so' 'libudev.so')
+
+ mv "$srcdir/_libsystemd"/* "$pkgdir"
+}
+
+package_systemd-sysvcompat() {
+ pkgdesc="sysvinit compat for systemd"
+ license=('GPL2')
+ groups=('base')
+ conflicts=('sysvinit')
+ depends=('systemd')
+
+ mv "$srcdir/_sysvcompat"/* "$pkgdir"
+
+ install -dm755 "$pkgdir/usr/bin"
+ for tool in runlevel reboot shutdown poweroff halt telinit; do
+ ln -s 'systemctl' "$pkgdir/usr/bin/$tool"
+ done
+
+ ln -s '../lib/systemd/systemd' "$pkgdir/usr/bin/init"
+}
+
+# vim: ft=sh syn=sh et
Copied: systemd/repos/testing-x86_64/initcpio-hook-udev (from rev 207521, systemd/trunk/initcpio-hook-udev)
===================================================================
--- testing-x86_64/initcpio-hook-udev (rev 0)
+++ testing-x86_64/initcpio-hook-udev 2014-03-12 01:11:27 UTC (rev 207522)
@@ -0,0 +1,22 @@
+#!/usr/bin/ash
+
+run_earlyhook() {
+ kmod static-nodes --format=tmpfiles --output=/run/tmpfiles.d/kmod.conf
+ systemd-tmpfiles --prefix=/dev --create
+ /usr/lib/systemd/systemd-udevd --daemon --resolve-names=never
+ udevd_running=1
+}
+
+run_hook() {
+ msg ":: Triggering uevents..."
+ udevadm trigger --action=add --type=subsystems
+ udevadm trigger --action=add --type=devices
+ udevadm settle
+}
+
+run_cleanuphook() {
+ udevadm control --exit
+ udevadm info --cleanup-db
+}
+
+# vim: set ft=sh ts=4 sw=4 et:
Copied: systemd/repos/testing-x86_64/initcpio-install-systemd (from rev 207521, systemd/trunk/initcpio-install-systemd)
===================================================================
--- testing-x86_64/initcpio-install-systemd (rev 0)
+++ testing-x86_64/initcpio-install-systemd 2014-03-12 01:11:27 UTC (rev 207522)
@@ -0,0 +1,159 @@
+#!/bin/bash
+
+strip_quotes() {
+ local len=${#1} quotes=$'[\'"]' str=${!1}
+
+ if [[ ${str:0:1} = ${str: -1} && ${str:0:1} = $quotes ]]; then
+ printf -v "$1" %s "${str:1:-1}"
+ fi
+}
+
+add_udev_rule() {
+ # Add an udev rules file to the initcpio image. Dependencies on binaries
+ # will be discovered and added.
+ # $1: path to rules file (or name of rules file)
+
+ local rules= rule= key= value= binary=
+
+ rules=$(PATH=/usr/lib/udev/rules.d:/lib/udev/rules.d type -P "$1")
+ if [[ -z $rules ]]; then
+ # complain about not found rules
+ return 1
+ fi
+
+ add_file "$rules"
+
+ while IFS=, read -ra rule; do
+ # skip empty lines, comments
+ [[ -z $rule || $rule = @(+([[:space:]])|#*) ]] && continue
+
+ for pair in "${rule[@]}"; do
+ IFS=' =' read -r key value <<< "$pair"
+ case $key in
+ RUN@({program}|+)|IMPORT{program}|ENV{REMOVE_CMD})
+ strip_quotes 'value'
+ # just take the first word as the binary name
+ binary=${value%% *}
+ if [[ ${binary:0:1} != '/' ]]; then
+ binary=$(PATH=/usr/lib/udev:/lib/udev type -P "$binary")
+ fi
+ add_binary "$binary"
+ ;;
+ esac
+ done
+ done <"$rules"
+}
+
+add_systemd_unit() {
+ # Add a systemd unit file to the initcpio image. Hard dependencies on binaries
+ # and other unit files will be discovered and added.
+ # $1: path to rules file (or name of rules file)
+
+ local unit= rule= entry= key= value= binary= dep=
+
+ unit=$(PATH=/usr/lib/systemd/system:/lib/systemd/system type -P "$1")
+ if [[ -z $unit ]]; then
+ # complain about not found unit file
+ return 1
+ fi
+
+ add_file "$unit"
+
+ while IFS='=' read -r key values; do
+ read -ra values <<< "$values"
+
+ case $key in
+ Requires|OnFailure)
+ # only add hard dependencies (not Wants)
+ map add_systemd_unit "${values[@]}"
+ ;;
+ Exec*)
+ # don't add binaries unless they are required
+ if [[ ${values[0]:0:1} != '-' ]]; then
+ add_binary "${values[0]}"
+ fi
+ ;;
+ esac
+
+ done <"$unit"
+
+ # preserve reverse soft dependency
+ for dep in {/usr,}/lib/systemd/system/*.wants/${unit##*/}; do
+ if [[ -L $dep ]]; then
+ add_symlink "$dep"
+ fi
+ done
+
+ # add hard dependencies
+ if [[ -d $unit.requires ]]; then
+ for dep in "$unit".requires/*; do
+ add_systemd_unit ${dep##*/}
+ done
+ fi
+}
+
+build() {
+ local rules unit
+
+ # from base
+ add_binary /bin/mount
+ add_binary /usr/bin/kmod /usr/bin/modprobe
+
+ # systemd
+ add_binary /usr/lib/systemd/systemd /init
+ add_binary /usr/bin/systemd-tmpfiles
+
+ # generate sysroot.mount and sysroot-usr.mount
+ add_file "/usr/lib/systemd/system-generators/systemd-fstab-generator"
+
+ # udev rules and systemd units
+ map add_udev_rule "$rules" \
+ 50-udev-default.rules \
+ 60-persistent-storage.rules \
+ 64-btrfs.rules \
+ 80-drivers.rules \
+ 99-systemd.rules \
+
+ map add_systemd_unit \
+ ctrl-alt-del.target \
+ initrd-cleanup.service \
+ initrd-fs.target \
+ initrd-parse-etc.service \
+ initrd-root-fs.target \
+ initrd-switch-root.service \
+ initrd-switch-root.target \
+ initrd-udevadm-cleanup-db.service \
+ initrd.target \
+ kmod-static-nodes.service \
+ sockets.target \
+ systemd-fsck at .service \
+ systemd-journald.service \
+ systemd-tmpfiles-setup-dev.service \
+ systemd-udev-trigger.service \
+ systemd-udevd-control.socket \
+ systemd-udevd-kernel.socket \
+ systemd-udevd.service
+
+ add_symlink "/usr/lib/systemd/system/default.target" "initrd.target"
+
+ # libdbus needs the passwd info of the root user
+ # TODO: make sure this is no longer necessary when systemctl moves to sd-bus
+ add_file "/etc/nsswitch.conf"
+ add_file "/etc/passwd"
+ add_binary "$(readlink -f /usr/lib/libnss_files.so)"
+
+ # udev wants /etc/group since it doesn't launch with --resolve-names=never
+ add_file "/etc/group"
+}
+
+help() {
+ cat <<HELPEOF
+This will install a basic systemd setup in your initramfs, and is meant to
+replace the 'base', 'usr', 'udev' and 'timestamp' hooks. Other hooks with runtime
+components will need to be ported, and will not work as intended. You also may
+wish to still include the 'base' hook (before this hook) to ensure that a
+rescue shell exists on your initramfs.
+HELPEOF
+}
+
+# vim: set ft=sh ts=4 sw=4 et:
Copied: systemd/repos/testing-x86_64/initcpio-install-udev (from rev 207521, systemd/trunk/initcpio-install-udev)
===================================================================
--- testing-x86_64/initcpio-install-udev (rev 0)
+++ testing-x86_64/initcpio-install-udev 2014-03-12 01:11:27 UTC (rev 207522)
@@ -0,0 +1,29 @@
+#!/bin/bash
+
+build() {
+ local rules tool
+
+ add_file "/etc/udev/udev.conf"
+ add_binary /usr/lib/systemd/systemd-udevd
+ add_binary /usr/bin/udevadm
+ add_binary /usr/bin/systemd-tmpfiles
+
+ for rules in 50-udev-default.rules 60-persistent-storage.rules 64-btrfs.rules 80-drivers.rules; do
+ add_file "/usr/lib/udev/rules.d/$rules"
+ done
+ for tool in ata_id scsi_id; do
+ add_file "/usr/lib/udev/$tool"
+ done
+
+ add_runscript
+}
+
+help() {
+ cat <<HELPEOF
+This hook will use udev to create your root device node and detect the needed
+modules for your root device. It is also required for firmware loading in
+initramfs. It is recommended to use this hook.
+HELPEOF
+}
+
+# vim: set ft=sh ts=4 sw=4 et:
Copied: systemd/repos/testing-x86_64/systemd.install (from rev 207521, systemd/trunk/systemd.install)
===================================================================
--- testing-x86_64/systemd.install (rev 0)
+++ testing-x86_64/systemd.install 2014-03-12 01:11:27 UTC (rev 207522)
@@ -0,0 +1,145 @@
+#!/bin/sh
+
+sd_booted() {
+ [ -d /run/systemd/system ]
+}
+
+add_privs() {
+ if ! setcap "$2" "$1" 2>/dev/null; then
+ echo "==> Warning: setcap failed, falling back to setuid root on /$1"
+ chmod u+s "$1"
+ fi
+}
+
+add_journal_acls() {
+ # ignore errors, since the filesystem might not support ACLs
+ setfacl -Rnm g:wheel:rx,d:g:wheel:rx,g:adm:rx,d:g:adm:rx /var/log/journal/ 2>/dev/null
+ :
+}
+
+maybe_reexec() {
+ # don't reexec on 209-1 upgrade due to large infrastructural changes.
+ if [ "$(vercmp 209-1 "$2")" -eq 1 ]; then
+ echo ':: systemd has not been reexecuted. It is recommended that you'
+ echo ' reboot at your earliest convenience.'
+ return
+ fi
+
+ if sd_booted; then
+ systemctl --system daemon-reexec
+ fi
+}
+
+_dir_empty() {
+ set -- "$1"/*
+ [ ! -e "$1" ] && [ ! -L "$1" ]
+}
+
+post_common() {
+ systemd-machine-id-setup
+
+ add_privs usr/bin/systemd-detect-virt 'cap_dac_override,cap_sys_ptrace+ep'
+
+ udevadm hwdb --update
+ journalctl --update-catalog
+}
+
+_208_changes() {
+ chown root:systemd-journal var/log/journal
+ chmod 2755 var/log/journal
+
+ if [ -e var/lib/backlight ] && [ ! -e var/lib/systemd/backlight ]; then
+ mv -T var/lib/backlight var/lib/systemd/backlight
+ fi
+
+ if [ -e var/lib/random-seed ] && [ ! -e var/lib/systemd/random-seed ]; then
+ mv -T var/lib/random-seed var/lib/systemd/random-seed
+ fi
+}
+
+_209_changes() {
+ # attempt to preserve existing behavior
+
+ local old_rule=etc/udev/rules.d/80-net-name-slot.rules
+ local new_rule=etc/udev/rules.d/80-net-setup-link.rules
+
+ echo ":: Network device naming is now controlled by udev's net_setup_link"
+ echo " builtin. Refer to the NETWORK LINK CONFIGURATION section of the"
+ echo " udev manpage for a full description."
+
+ # not clear what action we can take here, so don't do anything
+ [[ -e $new_rule ]] && return 0
+
+ # rename the old rule to the new one so that we preserve the user's
+ # existing option.
+ if [[ -e $old_rule ]]; then
+ printf ':: Renaming %s to %s in order\n' "${old_rule##*/}" "${new_rule##*/}"
+ printf ' to preserve existing network naming behavior.\n'
+ mv -v "$old_rule" "$new_rule"
+ else
+ echo ':: No changes have been made to your network naming configuration.'
+ echo ' Interfaces should continue to maintain the same names.'
+ fi
+}
+
+_210_changes() {
+ if sd_booted; then
+ # If /etc/systemd/network is non-empty, then this is a 209 user who used
+ # networkd. Re-enable it for them.
+ if ! _dir_empty etc/systemd/network; then
+ systemctl enable systemd-networkd
+ fi
+ fi
+}
+
+post_install() {
+ post_common "$@"
+
+ add_journal_acls
+
+ # enable getty at tty1 by default, but don't track the file
+ systemctl enable getty at tty1.service
+
+ echo ":: Append 'init=/usr/lib/systemd/systemd' to your kernel command line in your"
+ echo " bootloader to replace sysvinit with systemd, or install systemd-sysvcompat"
+}
+
+post_upgrade() {
+ post_common "$@"
+
+ maybe_reexec "$@"
+
+ if [ "$(vercmp 204-1 "$2")" -eq 1 ]; then
+ printf '==> The /bin/systemd symlink has been removed. Any references in your\n'
+ printf ' bootloader (or elsewhere) must be updated to /usr/lib/systemd/systemd.\n'
+ fi
+
+ if [ "$(vercmp 205-1 "$2")" -eq 1 ]; then
+ printf '==> systemd 205 restructures the cgroup hierarchy and changes internal\n'
+ printf ' protocols. You should reboot at your earliest convenience.\n'
+ fi
+
+ if [ "$(vercmp 206-1 "$2")" -eq 1 ]; then
+ printf '==> The "timestamp" hook for mkinitcpio no longer exists. If you used\n'
+ printf ' this hook, you must remove it from /etc/mkinitcpio.conf. A "systemd"\n'
+ printf ' hook has been added which provides this functionality, and more.\n'
+ fi
+
+ if [ "$(vercmp 208-1 "$2")" -eq 1 ]; then
+ _208_changes
+ fi
+
+ if [ "$(vercmp 208-8 "$2")" -eq 1 ]; then
+ add_journal_acls
+ fi
+
+ if [ "$(vercmp 209-1 "$2")" -eq 1 ]; then
+ _209_changes
+ fi
+
+ if [ "$(vercmp 210-1 "$2")" -eq 1 ]; then
+ _210_changes
+ fi
+}
+
+# vim:set ts=2 sw=2 et:
More information about the arch-commits
mailing list