[arch-commits] Commit in gnuradio/repos (6 files)
Kyle Keen
kkeen at archlinux.org
Tue Nov 18 00:06:14 UTC 2014
Date: Tuesday, November 18, 2014 @ 01:06:14
Author: kkeen
Revision: 122694
archrelease: copy trunk to community-i686, community-x86_64
Deleted:
gnuradio/repos/community-i686/21-fcd.rules
gnuradio/repos/community-i686/PKGBUILD
gnuradio/repos/community-i686/gnuradio.install
gnuradio/repos/community-x86_64/21-fcd.rules
gnuradio/repos/community-x86_64/PKGBUILD
gnuradio/repos/community-x86_64/gnuradio.install
-----------------------------------+
community-i686/21-fcd.rules | 9 --
community-i686/PKGBUILD | 113 ------------------------------------
community-i686/gnuradio.install | 51 ----------------
community-x86_64/21-fcd.rules | 9 --
community-x86_64/PKGBUILD | 113 ------------------------------------
community-x86_64/gnuradio.install | 51 ----------------
6 files changed, 346 deletions(-)
Deleted: community-i686/21-fcd.rules
===================================================================
--- community-i686/21-fcd.rules 2014-11-18 00:05:03 UTC (rev 122693)
+++ community-i686/21-fcd.rules 2014-11-18 00:06:14 UTC (rev 122694)
@@ -1,9 +0,0 @@
-# Udev rules for the Funcube Dongle Pro (0xfb56) and Pro+ (0xfb31)
-
-# HIDAPI/libusb:
-SUBSYSTEMS=="usb" ATTRS{idVendor}=="04d8" ATTRS{idProduct}=="fb56" MODE:="0666"
-SUBSYSTEMS=="usb" ATTRS{idVendor}=="04d8" ATTRS{idProduct}=="fb31" MODE:="0666"
-
-# HIDAPI/hidraw:
-KERNEL=="hidraw*", ATTRS{busnum}=="1", ATTRS{idVendor}=="04d8", ATTRS{idProduct}=="fb56", MODE="0666"
-KERNEL=="hidraw*", ATTRS{busnum}=="1", ATTRS{idVendor}=="04d8", ATTRS{idProduct}=="fb31", MODE="0666"
Deleted: community-i686/PKGBUILD
===================================================================
--- community-i686/PKGBUILD 2014-11-18 00:05:03 UTC (rev 122693)
+++ community-i686/PKGBUILD 2014-11-18 00:06:14 UTC (rev 122694)
@@ -1,113 +0,0 @@
-# $Id$
-# Maintainer: Kyle Keen <keenerd at gmail.com>
-# Contributor: Dominik Heidler <dheidler at gmail.com>
-# Contributor: Jonatan Sastre <jsastreh [ at ] hotmail.com>
-pkgbase=gnuradio
-pkgname=(gnuradio gnuradio-companion)
-pkgver=3.7.5.1
-pkgrel=3
-pkgdesc="General purpose DSP and SDR toolkit. With drivers for usrp and fcd."
-arch=('i686' 'x86_64')
-url="http://gnuradio.org"
-license=('GPL')
-depends=('fftw' 'python2-numpy' 'cppunit' 'gsl' 'blas' 'guile' 'boost-libs>=1.53' 'libusbx' 'portaudio' 'libuhd' 'zeromq')
-makedepends=('boost' 'cmake' 'python2-lxml' 'pygtk' 'wxpython' 'python2-cheetah' 'glu' 'swig' )
-optdepends=('gnuradio-osmosdr: pile of driver blocks'
- 'boost: gr_modtool'
- 'swig: gr_modtool'
- 'cmake: gr_modtool'
- 'pkgconfig: libuhd')
-conflicts=('gnuradio-git')
-install=gnuradio.install
-
-# gr-qtgui todo
-# talk to ronald about adding qwt5 to qwt package
-# bring pyqwt in from AUR
-# update optdepends
-# 'qwtplot3d: gr-qtgui'
-# 'pyqwt: gr-qtgui'
-# update makedepends
-# 'qwtplot3d'
-# http://gnuradio.org/doc/doxygen/page_qtgui.html
-
-# gr-video-sdl ?
-
-# todo
-# split the gui components?
-# build doxygen docs?
-# icons
-# gnuradio-osmosdr is not an optdep
-
-# comedilib: gr-comedi
-# zeroc-ice: gr-ctrlport
-# doxygen: C++ autogenerated documentation
-# python2-sphinx: Python autogenerated documentation
-
-source=("http://gnuradio.org/releases/$pkgbase/$pkgbase-$pkgver.tar.gz"
- "21-fcd.rules")
-md5sums=('bfd2116b344a949aacc3d7e2eff07642'
- '465e12c454c6a22ebec9849181af7bdc')
-
-build() {
- export PYTHON=python2
- cd "$srcdir/$pkgbase-$pkgver"
- sed -i -e "s|GR_PKG_LIBEXEC_DIR|GR_RUNTIME_DIR|" grc/freedesktop/CMakeLists.txt
- sed -i -e "s|/qwt$|/qwt5|" -e "s| qwt | qwt5 |" cmake/Modules/FindQwt.cmake
- sed -i -e "s| sphinx-build$| sphinx-build2|" cmake/Modules/FindSphinx.cmake
- msg "Starting build."
- mkdir -p build
- cd build
- cmake \
- -DPYTHON_EXECUTABLE=$(which python2) \
- -DPYTHON_INCLUDE_DIR=$(echo /usr/include/python2*) \
- -DPYTHON_LIBRARY=$(echo /usr/lib/libpython2.*.so) \
- -DENABLE_GRC=ON \
- -DENABLE_GR_WXGUI=ON \
- -DCMAKE_INSTALL_PREFIX=/usr -Wno-dev ../
- make
-}
-
-check() {
- cd "$srcdir/$pkgbase-$pkgver/build"
- export PYTHON=python2
- #make test
-}
-
-package_gnuradio() {
- cd "$srcdir"
- install -Dm644 21-fcd.rules "$pkgdir/usr/lib/udev/rules.d/21-fcd.rules"
- cd "$srcdir/$pkgbase-$pkgver/grc/freedesktop"
- install -Dm644 gnuradio-grc.desktop "$pkgdir/usr/share/applications/$pkgbase.desktop"
- cd "$srcdir/$pkgbase-$pkgver/build"
- make DESTDIR="$pkgdir" install
- msg "Replacing filenames to use python2."
- sed -i -e "s|#![ ]*/usr/bin/env python$|#!/usr/bin/env python2|" \
- $(find "$pkgdir" -name '*.py') \
- $(find "$pkgdir" -name 'gnuradio-companion' -o -name 'flow_graph.tmpl')
- sed -i -e "s|#![ ]*/usr/bin/env /usr/bin/python$|#!/usr/bin/env python2|" \
- $(find "$pkgdir" -name '*.py')
- find "$pkgdir/" -name '*.pyc' -delete
- find "$pkgdir/" -name '*.pyo' -delete
-}
-
-package_gnuradio-companion() {
- pkgdesc="GUI frontend for gnuradio and SDR."
- depends=('python2-cheetah' 'python2-lxml' 'pygtk' 'wxpython' 'python2-opengl')
- optdepends=()
- conflicts=()
- install="gnuradio-companion.install"
- # Yup, nothing in the package except dependencies,
- # because five optdeps is too many for most people.
-}
-
-# options for armv6:
-# -Dhave_mfpu_neon=0 \
-# -DCMAKE_CXX_FLAGS:STRING="-march=armv6 -mfpu=vfp -mfloat-abi=hard" \
-# -DCMAKE_C_FLAGS:STRING="-march=armv6 -mfpu=vfp -mfloat-abi=hard" \
-
-# options for armv7:
-# -DCMAKE_CXX_FLAGS:STRING="-march=armv7-a -mcpu=cortex-a9 -mfpu=neon -mfloat-abi=hard"
-# -DCMAKE_C_FLAGS:STRING="-march=armv7-a -mcpu=cortex-a9 -mfpu=neon -mfloat-abi=hard"
-# line 341 add /usr/lib/arm-linux-gnueabihf /usr/lib/arm-linux-gnueabi
-
-
Deleted: community-i686/gnuradio.install
===================================================================
--- community-i686/gnuradio.install 2014-11-18 00:05:03 UTC (rev 122693)
+++ community-i686/gnuradio.install 2014-11-18 00:06:14 UTC (rev 122694)
@@ -1,51 +0,0 @@
-
-# clean up for anyone silly enough to run this as root
-
-# it would be great if pkgname and not just pkgver was passed in the arg list
-
-_pkg='gnuradio'
-_cpython='cpython-34'
-
-post_upgrade() {
- while read _f; do
- if [[ "${_f:(-3)}" != ".py" ]]; then
- continue
- fi
- if [[ ! -f "$_f" ]]; then
- continue
- fi
- if [[ -e "${_f}c" ]]; then
- rm -f "${_f}c"
- fi
- if [[ -e "${_f}o" ]]; then
- rm -f "${_f}o"
- fi
- continue
- _thisdir="$(dirname "$_f")/__pycache__"
- if [[ ! -d "$_thisdir" ]]; then
- continue
- fi
- _thisfile="$(basename "$_f")"
- _thisfile="${_thisfile/%.py/.${_cpython}.py}"
- if [[ -e "${_thisdir}/${_thisfile}c" ]]; then
- rm -f "${_thisdir}/${_thisfile}c"
- fi
- if [[ -e "${_thisdir}/${_thisfile}o" ]]; then
- rm -f "${_thisdir}/${_thisfile}o"
- fi
- # no good way to test for empty dir
- # would be 25% faster if there were
- rmdir --ignore-fail-on-non-empty "$_thisdir" &> /dev/null
- done <<< "$(pacman -Qql $_pkg | grep '\.py$')"
-
- update-desktop-database -q
-}
-
-post_install() {
- post_upgrade $1
-}
-
-pre_remove() {
- post_upgrade $1
-}
-
Deleted: community-x86_64/21-fcd.rules
===================================================================
--- community-x86_64/21-fcd.rules 2014-11-18 00:05:03 UTC (rev 122693)
+++ community-x86_64/21-fcd.rules 2014-11-18 00:06:14 UTC (rev 122694)
@@ -1,9 +0,0 @@
-# Udev rules for the Funcube Dongle Pro (0xfb56) and Pro+ (0xfb31)
-
-# HIDAPI/libusb:
-SUBSYSTEMS=="usb" ATTRS{idVendor}=="04d8" ATTRS{idProduct}=="fb56" MODE:="0666"
-SUBSYSTEMS=="usb" ATTRS{idVendor}=="04d8" ATTRS{idProduct}=="fb31" MODE:="0666"
-
-# HIDAPI/hidraw:
-KERNEL=="hidraw*", ATTRS{busnum}=="1", ATTRS{idVendor}=="04d8", ATTRS{idProduct}=="fb56", MODE="0666"
-KERNEL=="hidraw*", ATTRS{busnum}=="1", ATTRS{idVendor}=="04d8", ATTRS{idProduct}=="fb31", MODE="0666"
Deleted: community-x86_64/PKGBUILD
===================================================================
--- community-x86_64/PKGBUILD 2014-11-18 00:05:03 UTC (rev 122693)
+++ community-x86_64/PKGBUILD 2014-11-18 00:06:14 UTC (rev 122694)
@@ -1,113 +0,0 @@
-# $Id$
-# Maintainer: Kyle Keen <keenerd at gmail.com>
-# Contributor: Dominik Heidler <dheidler at gmail.com>
-# Contributor: Jonatan Sastre <jsastreh [ at ] hotmail.com>
-pkgbase=gnuradio
-pkgname=(gnuradio gnuradio-companion)
-pkgver=3.7.5.1
-pkgrel=3
-pkgdesc="General purpose DSP and SDR toolkit. With drivers for usrp and fcd."
-arch=('i686' 'x86_64')
-url="http://gnuradio.org"
-license=('GPL')
-depends=('fftw' 'python2-numpy' 'cppunit' 'gsl' 'blas' 'guile' 'boost-libs>=1.53' 'libusbx' 'portaudio' 'libuhd' 'zeromq')
-makedepends=('boost' 'cmake' 'python2-lxml' 'pygtk' 'wxpython' 'python2-cheetah' 'glu' 'swig' )
-optdepends=('gnuradio-osmosdr: pile of driver blocks'
- 'boost: gr_modtool'
- 'swig: gr_modtool'
- 'cmake: gr_modtool'
- 'pkgconfig: libuhd')
-conflicts=('gnuradio-git')
-install=gnuradio.install
-
-# gr-qtgui todo
-# talk to ronald about adding qwt5 to qwt package
-# bring pyqwt in from AUR
-# update optdepends
-# 'qwtplot3d: gr-qtgui'
-# 'pyqwt: gr-qtgui'
-# update makedepends
-# 'qwtplot3d'
-# http://gnuradio.org/doc/doxygen/page_qtgui.html
-
-# gr-video-sdl ?
-
-# todo
-# split the gui components?
-# build doxygen docs?
-# icons
-# gnuradio-osmosdr is not an optdep
-
-# comedilib: gr-comedi
-# zeroc-ice: gr-ctrlport
-# doxygen: C++ autogenerated documentation
-# python2-sphinx: Python autogenerated documentation
-
-source=("http://gnuradio.org/releases/$pkgbase/$pkgbase-$pkgver.tar.gz"
- "21-fcd.rules")
-md5sums=('bfd2116b344a949aacc3d7e2eff07642'
- '465e12c454c6a22ebec9849181af7bdc')
-
-build() {
- export PYTHON=python2
- cd "$srcdir/$pkgbase-$pkgver"
- sed -i -e "s|GR_PKG_LIBEXEC_DIR|GR_RUNTIME_DIR|" grc/freedesktop/CMakeLists.txt
- sed -i -e "s|/qwt$|/qwt5|" -e "s| qwt | qwt5 |" cmake/Modules/FindQwt.cmake
- sed -i -e "s| sphinx-build$| sphinx-build2|" cmake/Modules/FindSphinx.cmake
- msg "Starting build."
- mkdir -p build
- cd build
- cmake \
- -DPYTHON_EXECUTABLE=$(which python2) \
- -DPYTHON_INCLUDE_DIR=$(echo /usr/include/python2*) \
- -DPYTHON_LIBRARY=$(echo /usr/lib/libpython2.*.so) \
- -DENABLE_GRC=ON \
- -DENABLE_GR_WXGUI=ON \
- -DCMAKE_INSTALL_PREFIX=/usr -Wno-dev ../
- make
-}
-
-check() {
- cd "$srcdir/$pkgbase-$pkgver/build"
- export PYTHON=python2
- #make test
-}
-
-package_gnuradio() {
- cd "$srcdir"
- install -Dm644 21-fcd.rules "$pkgdir/usr/lib/udev/rules.d/21-fcd.rules"
- cd "$srcdir/$pkgbase-$pkgver/grc/freedesktop"
- install -Dm644 gnuradio-grc.desktop "$pkgdir/usr/share/applications/$pkgbase.desktop"
- cd "$srcdir/$pkgbase-$pkgver/build"
- make DESTDIR="$pkgdir" install
- msg "Replacing filenames to use python2."
- sed -i -e "s|#![ ]*/usr/bin/env python$|#!/usr/bin/env python2|" \
- $(find "$pkgdir" -name '*.py') \
- $(find "$pkgdir" -name 'gnuradio-companion' -o -name 'flow_graph.tmpl')
- sed -i -e "s|#![ ]*/usr/bin/env /usr/bin/python$|#!/usr/bin/env python2|" \
- $(find "$pkgdir" -name '*.py')
- find "$pkgdir/" -name '*.pyc' -delete
- find "$pkgdir/" -name '*.pyo' -delete
-}
-
-package_gnuradio-companion() {
- pkgdesc="GUI frontend for gnuradio and SDR."
- depends=('python2-cheetah' 'python2-lxml' 'pygtk' 'wxpython' 'python2-opengl')
- optdepends=()
- conflicts=()
- install="gnuradio-companion.install"
- # Yup, nothing in the package except dependencies,
- # because five optdeps is too many for most people.
-}
-
-# options for armv6:
-# -Dhave_mfpu_neon=0 \
-# -DCMAKE_CXX_FLAGS:STRING="-march=armv6 -mfpu=vfp -mfloat-abi=hard" \
-# -DCMAKE_C_FLAGS:STRING="-march=armv6 -mfpu=vfp -mfloat-abi=hard" \
-
-# options for armv7:
-# -DCMAKE_CXX_FLAGS:STRING="-march=armv7-a -mcpu=cortex-a9 -mfpu=neon -mfloat-abi=hard"
-# -DCMAKE_C_FLAGS:STRING="-march=armv7-a -mcpu=cortex-a9 -mfpu=neon -mfloat-abi=hard"
-# line 341 add /usr/lib/arm-linux-gnueabihf /usr/lib/arm-linux-gnueabi
-
-
Deleted: community-x86_64/gnuradio.install
===================================================================
--- community-x86_64/gnuradio.install 2014-11-18 00:05:03 UTC (rev 122693)
+++ community-x86_64/gnuradio.install 2014-11-18 00:06:14 UTC (rev 122694)
@@ -1,51 +0,0 @@
-
-# clean up for anyone silly enough to run this as root
-
-# it would be great if pkgname and not just pkgver was passed in the arg list
-
-_pkg='gnuradio'
-_cpython='cpython-34'
-
-post_upgrade() {
- while read _f; do
- if [[ "${_f:(-3)}" != ".py" ]]; then
- continue
- fi
- if [[ ! -f "$_f" ]]; then
- continue
- fi
- if [[ -e "${_f}c" ]]; then
- rm -f "${_f}c"
- fi
- if [[ -e "${_f}o" ]]; then
- rm -f "${_f}o"
- fi
- continue
- _thisdir="$(dirname "$_f")/__pycache__"
- if [[ ! -d "$_thisdir" ]]; then
- continue
- fi
- _thisfile="$(basename "$_f")"
- _thisfile="${_thisfile/%.py/.${_cpython}.py}"
- if [[ -e "${_thisdir}/${_thisfile}c" ]]; then
- rm -f "${_thisdir}/${_thisfile}c"
- fi
- if [[ -e "${_thisdir}/${_thisfile}o" ]]; then
- rm -f "${_thisdir}/${_thisfile}o"
- fi
- # no good way to test for empty dir
- # would be 25% faster if there were
- rmdir --ignore-fail-on-non-empty "$_thisdir" &> /dev/null
- done <<< "$(pacman -Qql $_pkg | grep '\.py$')"
-
- update-desktop-database -q
-}
-
-post_install() {
- post_upgrade $1
-}
-
-pre_remove() {
- post_upgrade $1
-}
-
More information about the arch-commits
mailing list