[arch-commits] Commit in tor/repos (16 files)
Lukas Fleischer
lfleischer at archlinux.org
Fri Oct 21 20:04:28 UTC 2016
Date: Friday, October 21, 2016 @ 20:04:28
Author: lfleischer
Revision: 192888
archrelease: copy trunk to community-i686, community-x86_64
Added:
tor/repos/community-i686/PKGBUILD
(from rev 192887, tor/trunk/PKGBUILD)
tor/repos/community-i686/tor.install
(from rev 192887, tor/trunk/tor.install)
tor/repos/community-i686/tor.service
(from rev 192887, tor/trunk/tor.service)
tor/repos/community-i686/torrc
(from rev 192887, tor/trunk/torrc)
tor/repos/community-x86_64/PKGBUILD
(from rev 192887, tor/trunk/PKGBUILD)
tor/repos/community-x86_64/tor.install
(from rev 192887, tor/trunk/tor.install)
tor/repos/community-x86_64/tor.service
(from rev 192887, tor/trunk/tor.service)
tor/repos/community-x86_64/torrc
(from rev 192887, tor/trunk/torrc)
Deleted:
tor/repos/community-i686/PKGBUILD
tor/repos/community-i686/tor.install
tor/repos/community-i686/tor.service
tor/repos/community-i686/torrc
tor/repos/community-x86_64/PKGBUILD
tor/repos/community-x86_64/tor.install
tor/repos/community-x86_64/tor.service
tor/repos/community-x86_64/torrc
------------------------------+
/PKGBUILD | 94 ++++++++++
/tor.install | 8
/tor.service | 30 +++
/torrc | 378 +++++++++++++++++++++++++++++++++++++++++
community-i686/PKGBUILD | 47 -----
community-i686/tor.install | 4
community-i686/tor.service | 15 -
community-i686/torrc | 189 --------------------
community-x86_64/PKGBUILD | 47 -----
community-x86_64/tor.install | 4
community-x86_64/tor.service | 15 -
community-x86_64/torrc | 189 --------------------
12 files changed, 510 insertions(+), 510 deletions(-)
Deleted: community-i686/PKGBUILD
===================================================================
--- community-i686/PKGBUILD 2016-10-21 20:04:19 UTC (rev 192887)
+++ community-i686/PKGBUILD 2016-10-21 20:04:28 UTC (rev 192888)
@@ -1,47 +0,0 @@
-# Maintainer: Lukas Fleischer <lfleischer at archlinux.org>
-# Contributor: Daniel Micay <danielmicay at gmail.com>
-# Contributor: simo <simo at archlinux.org>
-# Contributor: Sid Karunaratne
-
-pkgname=tor
-pkgver=0.2.8.8
-pkgrel=1
-pkgdesc='Anonymizing overlay network.'
-arch=('i686' 'x86_64')
-url='http://www.torproject.org/'
-license=('BSD')
-depends=('openssl' 'libevent' 'bash' 'libseccomp')
-optdepends=('torsocks: for torify')
-makedepends=('ca-certificates')
-backup=('etc/tor/torrc'
- 'etc/tor/torrc-dist')
-install='tor.install'
-source=("https://www.torproject.org/dist/${pkgname}-${pkgver}.tar.gz"{,.asc}
- 'torrc'
- 'tor.service')
-md5sums=('a9627e1655cab3a3df0da9b0f74aa21b'
- 'SKIP'
- 'c1dd4004c63edaeaa829e01be5413cfc'
- '503cedd9679f9817b2c27916ba989a74')
-validpgpkeys=('B35BF85BF19489D04E28C33C21194EBB165733EA') # Nick Mathewson
-
-build() {
- cd "${srcdir}/${pkgname}-${pkgver}"
-
- ./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var
- make
-}
-
-package() {
- cd "${srcdir}/${pkgname}-${pkgver}"
-
- make DESTDIR="${pkgdir}" install
-
- install -dm0700 -o 43 -g 43 "${pkgdir}/var/lib/tor"
-
- mv "${pkgdir}/etc/tor/torrc.sample" "${pkgdir}/etc/tor/torrc-dist"
- install -Dm0644 "${srcdir}/torrc" "${pkgdir}/etc/tor/torrc"
- install -Dm0644 "${srcdir}/tor.service" "${pkgdir}/usr/lib/systemd/system/tor.service"
-
- install -Dm0644 LICENSE "${pkgdir}/usr/share/licenses/${pkgname}/LICENSE"
-}
Copied: tor/repos/community-i686/PKGBUILD (from rev 192887, tor/trunk/PKGBUILD)
===================================================================
--- community-i686/PKGBUILD (rev 0)
+++ community-i686/PKGBUILD 2016-10-21 20:04:28 UTC (rev 192888)
@@ -0,0 +1,47 @@
+# Maintainer: Lukas Fleischer <lfleischer at archlinux.org>
+# Contributor: Daniel Micay <danielmicay at gmail.com>
+# Contributor: simo <simo at archlinux.org>
+# Contributor: Sid Karunaratne
+
+pkgname=tor
+pkgver=0.2.8.9
+pkgrel=1
+pkgdesc='Anonymizing overlay network.'
+arch=('i686' 'x86_64')
+url='http://www.torproject.org/'
+license=('BSD')
+depends=('openssl' 'libevent' 'bash' 'libseccomp')
+optdepends=('torsocks: for torify')
+makedepends=('ca-certificates')
+backup=('etc/tor/torrc'
+ 'etc/tor/torrc-dist')
+install='tor.install'
+source=("https://www.torproject.org/dist/${pkgname}-${pkgver}.tar.gz"{,.asc}
+ 'torrc'
+ 'tor.service')
+md5sums=('e1f8bc2b2e2b365fc916388304e5e40d'
+ 'SKIP'
+ 'c1dd4004c63edaeaa829e01be5413cfc'
+ '503cedd9679f9817b2c27916ba989a74')
+validpgpkeys=('2133BC600AB133E1D826D173FE43009C4607B1FB') # Nick Mathewson
+
+build() {
+ cd "${srcdir}/${pkgname}-${pkgver}"
+
+ ./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var
+ make
+}
+
+package() {
+ cd "${srcdir}/${pkgname}-${pkgver}"
+
+ make DESTDIR="${pkgdir}" install
+
+ install -dm0700 -o 43 -g 43 "${pkgdir}/var/lib/tor"
+
+ mv "${pkgdir}/etc/tor/torrc.sample" "${pkgdir}/etc/tor/torrc-dist"
+ install -Dm0644 "${srcdir}/torrc" "${pkgdir}/etc/tor/torrc"
+ install -Dm0644 "${srcdir}/tor.service" "${pkgdir}/usr/lib/systemd/system/tor.service"
+
+ install -Dm0644 LICENSE "${pkgdir}/usr/share/licenses/${pkgname}/LICENSE"
+}
Deleted: community-i686/tor.install
===================================================================
--- community-i686/tor.install 2016-10-21 20:04:19 UTC (rev 192887)
+++ community-i686/tor.install 2016-10-21 20:04:28 UTC (rev 192888)
@@ -1,4 +0,0 @@
-post_install() {
- groupadd -g 43 tor &>/dev/null
- useradd -u 43 -g tor -d /var/lib/tor -s /bin/false tor &> /dev/null
-}
Copied: tor/repos/community-i686/tor.install (from rev 192887, tor/trunk/tor.install)
===================================================================
--- community-i686/tor.install (rev 0)
+++ community-i686/tor.install 2016-10-21 20:04:28 UTC (rev 192888)
@@ -0,0 +1,4 @@
+post_install() {
+ groupadd -g 43 tor &>/dev/null
+ useradd -u 43 -g tor -d /var/lib/tor -s /bin/false tor &> /dev/null
+}
Deleted: community-i686/tor.service
===================================================================
--- community-i686/tor.service 2016-10-21 20:04:19 UTC (rev 192887)
+++ community-i686/tor.service 2016-10-21 20:04:28 UTC (rev 192888)
@@ -1,15 +0,0 @@
-[Unit]
-Description=Anonymizing Overlay Network
-After=network.target
-
-[Service]
-User=tor
-Type=simple
-ExecStart=/usr/bin/tor -f /etc/tor/torrc
-ExecReload=/usr/bin/kill -HUP $MAINPID
-KillSignal=SIGINT
-LimitNOFILE=8192
-PrivateDevices=yes
-
-[Install]
-WantedBy=multi-user.target
Copied: tor/repos/community-i686/tor.service (from rev 192887, tor/trunk/tor.service)
===================================================================
--- community-i686/tor.service (rev 0)
+++ community-i686/tor.service 2016-10-21 20:04:28 UTC (rev 192888)
@@ -0,0 +1,15 @@
+[Unit]
+Description=Anonymizing Overlay Network
+After=network.target
+
+[Service]
+User=tor
+Type=simple
+ExecStart=/usr/bin/tor -f /etc/tor/torrc
+ExecReload=/usr/bin/kill -HUP $MAINPID
+KillSignal=SIGINT
+LimitNOFILE=8192
+PrivateDevices=yes
+
+[Install]
+WantedBy=multi-user.target
Deleted: community-i686/torrc
===================================================================
--- community-i686/torrc 2016-10-21 20:04:19 UTC (rev 192887)
+++ community-i686/torrc 2016-10-21 20:04:28 UTC (rev 192888)
@@ -1,189 +0,0 @@
-## Configuration file for a typical Tor user
-## Last updated 22 April 2012 for Tor 0.2.3.14-alpha.
-## (may or may not work for much older or much newer versions of Tor.)
-##
-## Lines that begin with "## " try to explain what's going on. Lines
-## that begin with just "#" are disabled commands: you can enable them
-## by removing the "#" symbol.
-##
-## See 'man tor', or https://www.torproject.org/docs/tor-manual.html,
-## for more options you can use in this file.
-##
-## Tor will look for this file in various places based on your platform:
-## https://www.torproject.org/docs/faq#torrc
-
-## Tor opens a socks proxy on port 9050 by default -- even if you don't
-## configure one below. Set "SocksPort 0" if you plan to run Tor only
-## as a relay, and not make any local application connections yourself.
-#SocksPort 9050 # Default: Bind to localhost:9050 for local connections.
-#SocksPort 192.168.0.1:9100 # Bind to this adddress:port too.
-
-## Entry policies to allow/deny SOCKS requests based on IP address.
-## First entry that matches wins. If no SocksPolicy is set, we accept
-## all (and only) requests that reach a SocksPort. Untrusted users who
-## can access your SocksPort may be able to learn about the connections
-## you make.
-#SocksPolicy accept 192.168.0.0/16
-#SocksPolicy reject *
-
-## Logs go to stdout at level "notice" unless redirected by something
-## else, like one of the below lines. You can have as many Log lines as
-## you want.
-##
-## We advise using "notice" in most cases, since anything more verbose
-## may provide sensitive information to an attacker who obtains the logs.
-##
-## Send all messages of level 'notice' or higher to /var/log/tor/notices.log
-#Log notice file /var/log/tor/notices.log
-## Send every possible message to /var/log/tor/debug.log
-#Log debug file /var/log/tor/debug.log
-## Use the system log instead of Tor's logfiles
-Log notice syslog
-## To send all messages to stderr:
-#Log debug stderr
-
-## Uncomment this to start the process in the background... or use
-## --runasdaemon 1 on the command line. This is ignored on Windows;
-## see the FAQ entry if you want Tor to run as an NT service.
-#RunAsDaemon 1
-
-## The directory for keeping all the keys/etc. By default, we store
-## things in $HOME/.tor on Unix, and in Application Data\tor on Windows.
-DataDirectory /var/lib/tor
-
-## The port on which Tor will listen for local connections from Tor
-## controller applications, as documented in control-spec.txt.
-#ControlPort 9051
-## If you enable the controlport, be sure to enable one of these
-## authentication methods, to prevent attackers from accessing it.
-#HashedControlPassword 16:872860B76453A77D60CA2BB8C1A7042072093276A3D701AD684053EC4C
-#CookieAuthentication 1
-
-############### This section is just for location-hidden services ###
-
-## Once you have configured a hidden service, you can look at the
-## contents of the file ".../hidden_service/hostname" for the address
-## to tell people.
-##
-## HiddenServicePort x y:z says to redirect requests on port x to the
-## address y:z.
-
-#HiddenServiceDir /var/lib/tor/hidden_service/
-#HiddenServicePort 80 127.0.0.1:80
-
-#HiddenServiceDir /var/lib/tor/other_hidden_service/
-#HiddenServicePort 80 127.0.0.1:80
-#HiddenServicePort 22 127.0.0.1:22
-
-################ This section is just for relays #####################
-#
-## See https://www.torproject.org/docs/tor-doc-relay for details.
-
-## Required: what port to advertise for incoming Tor connections.
-#ORPort 9001
-## If you want to listen on a port other than the one advertised in
-## ORPort (e.g. to advertise 443 but bind to 9090), you can do it as
-## follows. You'll need to do ipchains or other port forwarding
-## yourself to make this work.
-#ORPort 443 NoListen
-#ORPort 127.0.0.1:9090 NoAdvertise
-
-## The IP address or full DNS name for incoming connections to your
-## relay. Leave commented out and Tor will guess.
-#Address noname.example.com
-
-## If you have multiple network interfaces, you can specify one for
-## outgoing traffic to use.
-# OutboundBindAddress 10.0.0.5
-
-## A handle for your relay, so people don't have to refer to it by key.
-#Nickname ididnteditheconfig
-
-## Define these to limit how much relayed traffic you will allow. Your
-## own traffic is still unthrottled. Note that RelayBandwidthRate must
-## be at least 20 KB.
-## Note that units for these config options are bytes per second, not bits
-## per second, and that prefixes are binary prefixes, i.e. 2^10, 2^20, etc.
-#RelayBandwidthRate 100 KB # Throttle traffic to 100KB/s (800Kbps)
-#RelayBandwidthBurst 200 KB # But allow bursts up to 200KB/s (1600Kbps)
-
-## Use these to restrict the maximum traffic per day, week, or month.
-## Note that this threshold applies separately to sent and received bytes,
-## not to their sum: setting "4 GB" may allow up to 8 GB total before
-## hibernating.
-##
-## Set a maximum of 4 gigabytes each way per period.
-#AccountingMax 4 GB
-## Each period starts daily at midnight (AccountingMax is per day)
-#AccountingStart day 00:00
-## Each period starts on the 3rd of the month at 15:00 (AccountingMax
-## is per month)
-#AccountingStart month 3 15:00
-
-## Contact info to be published in the directory, so we can contact you
-## if your relay is misconfigured or something else goes wrong. Google
-## indexes this, so spammers might also collect it.
-#ContactInfo Random Person <nobody AT example dot com>
-## You might also include your PGP or GPG fingerprint if you have one:
-#ContactInfo 0xFFFFFFFF Random Person <nobody AT example dot com>
-
-## Uncomment this to mirror directory information for others. Please do
-## if you have enough bandwidth.
-#DirPort 9030 # what port to advertise for directory connections
-## If you want to listen on a port other than the one advertised in
-## DirPort (e.g. to advertise 80 but bind to 9091), you can do it as
-## follows. below too. You'll need to do ipchains or other port
-## forwarding yourself to make this work.
-#DirPort 80 NoListen
-#DirPort 127.0.0.1:9091 NoAdvertise
-## Uncomment to return an arbitrary blob of html on your DirPort. Now you
-## can explain what Tor is if anybody wonders why your IP address is
-## contacting them. See contrib/tor-exit-notice.html in Tor's source
-## distribution for a sample.
-#DirPortFrontPage /etc/tor/tor-exit-notice.html
-
-## Uncomment this if you run more than one Tor relay, and add the identity
-## key fingerprint of each Tor relay you control, even if they're on
-## different networks. You declare it here so Tor clients can avoid
-## using more than one of your relays in a single circuit. See
-## https://www.torproject.org/docs/faq#MultipleRelays
-## However, you should never include a bridge's fingerprint here, as it would
-## break its concealability and potentionally reveal its IP/TCP address.
-#MyFamily $keyid,$keyid,...
-
-## A comma-separated list of exit policies. They're considered first
-## to last, and the first match wins. If you want to _replace_
-## the default exit policy, end this with either a reject *:* or an
-## accept *:*. Otherwise, you're _augmenting_ (prepending to) the
-## default exit policy. Leave commented to just use the default, which is
-## described in the man page or at
-## https://www.torproject.org/documentation.html
-##
-## Look at https://www.torproject.org/faq-abuse.html#TypicalAbuses
-## for issues you might encounter if you use the default exit policy.
-##
-## If certain IPs and ports are blocked externally, e.g. by your firewall,
-## you should update your exit policy to reflect this -- otherwise Tor
-## users will be told that those destinations are down.
-##
-## For security, by default Tor rejects connections to private (local)
-## networks, including to your public IP address. See the man page entry
-## for ExitPolicyRejectPrivate if you want to allow "exit enclaving".
-##
-#ExitPolicy accept *:6660-6667,reject *:* # allow irc ports but no more
-#ExitPolicy accept *:119 # accept nntp as well as default exit policy
-#ExitPolicy reject *:* # no exits allowed
-
-## Bridge relays (or "bridges") are Tor relays that aren't listed in the
-## main directory. Since there is no complete public list of them, even an
-## ISP that filters connections to all the known Tor relays probably
-## won't be able to block all the bridges. Also, websites won't treat you
-## differently because they won't know you're running Tor. If you can
-## be a real relay, please do; but if not, be a bridge!
-#BridgeRelay 1
-## By default, Tor will advertise your bridge to users through various
-## mechanisms like https://bridges.torproject.org/. If you want to run
-## a private bridge, for example because you'll give out your bridge
-## address manually to your friends, uncomment this line:
-#PublishServerDescriptor 0
-
Copied: tor/repos/community-i686/torrc (from rev 192887, tor/trunk/torrc)
===================================================================
--- community-i686/torrc (rev 0)
+++ community-i686/torrc 2016-10-21 20:04:28 UTC (rev 192888)
@@ -0,0 +1,189 @@
+## Configuration file for a typical Tor user
+## Last updated 22 April 2012 for Tor 0.2.3.14-alpha.
+## (may or may not work for much older or much newer versions of Tor.)
+##
+## Lines that begin with "## " try to explain what's going on. Lines
+## that begin with just "#" are disabled commands: you can enable them
+## by removing the "#" symbol.
+##
+## See 'man tor', or https://www.torproject.org/docs/tor-manual.html,
+## for more options you can use in this file.
+##
+## Tor will look for this file in various places based on your platform:
+## https://www.torproject.org/docs/faq#torrc
+
+## Tor opens a socks proxy on port 9050 by default -- even if you don't
+## configure one below. Set "SocksPort 0" if you plan to run Tor only
+## as a relay, and not make any local application connections yourself.
+#SocksPort 9050 # Default: Bind to localhost:9050 for local connections.
+#SocksPort 192.168.0.1:9100 # Bind to this adddress:port too.
+
+## Entry policies to allow/deny SOCKS requests based on IP address.
+## First entry that matches wins. If no SocksPolicy is set, we accept
+## all (and only) requests that reach a SocksPort. Untrusted users who
+## can access your SocksPort may be able to learn about the connections
+## you make.
+#SocksPolicy accept 192.168.0.0/16
+#SocksPolicy reject *
+
+## Logs go to stdout at level "notice" unless redirected by something
+## else, like one of the below lines. You can have as many Log lines as
+## you want.
+##
+## We advise using "notice" in most cases, since anything more verbose
+## may provide sensitive information to an attacker who obtains the logs.
+##
+## Send all messages of level 'notice' or higher to /var/log/tor/notices.log
+#Log notice file /var/log/tor/notices.log
+## Send every possible message to /var/log/tor/debug.log
+#Log debug file /var/log/tor/debug.log
+## Use the system log instead of Tor's logfiles
+Log notice syslog
+## To send all messages to stderr:
+#Log debug stderr
+
+## Uncomment this to start the process in the background... or use
+## --runasdaemon 1 on the command line. This is ignored on Windows;
+## see the FAQ entry if you want Tor to run as an NT service.
+#RunAsDaemon 1
+
+## The directory for keeping all the keys/etc. By default, we store
+## things in $HOME/.tor on Unix, and in Application Data\tor on Windows.
+DataDirectory /var/lib/tor
+
+## The port on which Tor will listen for local connections from Tor
+## controller applications, as documented in control-spec.txt.
+#ControlPort 9051
+## If you enable the controlport, be sure to enable one of these
+## authentication methods, to prevent attackers from accessing it.
+#HashedControlPassword 16:872860B76453A77D60CA2BB8C1A7042072093276A3D701AD684053EC4C
+#CookieAuthentication 1
+
+############### This section is just for location-hidden services ###
+
+## Once you have configured a hidden service, you can look at the
+## contents of the file ".../hidden_service/hostname" for the address
+## to tell people.
+##
+## HiddenServicePort x y:z says to redirect requests on port x to the
+## address y:z.
+
+#HiddenServiceDir /var/lib/tor/hidden_service/
+#HiddenServicePort 80 127.0.0.1:80
+
+#HiddenServiceDir /var/lib/tor/other_hidden_service/
+#HiddenServicePort 80 127.0.0.1:80
+#HiddenServicePort 22 127.0.0.1:22
+
+################ This section is just for relays #####################
+#
+## See https://www.torproject.org/docs/tor-doc-relay for details.
+
+## Required: what port to advertise for incoming Tor connections.
+#ORPort 9001
+## If you want to listen on a port other than the one advertised in
+## ORPort (e.g. to advertise 443 but bind to 9090), you can do it as
+## follows. You'll need to do ipchains or other port forwarding
+## yourself to make this work.
+#ORPort 443 NoListen
+#ORPort 127.0.0.1:9090 NoAdvertise
+
+## The IP address or full DNS name for incoming connections to your
+## relay. Leave commented out and Tor will guess.
+#Address noname.example.com
+
+## If you have multiple network interfaces, you can specify one for
+## outgoing traffic to use.
+# OutboundBindAddress 10.0.0.5
+
+## A handle for your relay, so people don't have to refer to it by key.
+#Nickname ididnteditheconfig
+
+## Define these to limit how much relayed traffic you will allow. Your
+## own traffic is still unthrottled. Note that RelayBandwidthRate must
+## be at least 20 KB.
+## Note that units for these config options are bytes per second, not bits
+## per second, and that prefixes are binary prefixes, i.e. 2^10, 2^20, etc.
+#RelayBandwidthRate 100 KB # Throttle traffic to 100KB/s (800Kbps)
+#RelayBandwidthBurst 200 KB # But allow bursts up to 200KB/s (1600Kbps)
+
+## Use these to restrict the maximum traffic per day, week, or month.
+## Note that this threshold applies separately to sent and received bytes,
+## not to their sum: setting "4 GB" may allow up to 8 GB total before
+## hibernating.
+##
+## Set a maximum of 4 gigabytes each way per period.
+#AccountingMax 4 GB
+## Each period starts daily at midnight (AccountingMax is per day)
+#AccountingStart day 00:00
+## Each period starts on the 3rd of the month at 15:00 (AccountingMax
+## is per month)
+#AccountingStart month 3 15:00
+
+## Contact info to be published in the directory, so we can contact you
+## if your relay is misconfigured or something else goes wrong. Google
+## indexes this, so spammers might also collect it.
+#ContactInfo Random Person <nobody AT example dot com>
+## You might also include your PGP or GPG fingerprint if you have one:
+#ContactInfo 0xFFFFFFFF Random Person <nobody AT example dot com>
+
+## Uncomment this to mirror directory information for others. Please do
+## if you have enough bandwidth.
+#DirPort 9030 # what port to advertise for directory connections
+## If you want to listen on a port other than the one advertised in
+## DirPort (e.g. to advertise 80 but bind to 9091), you can do it as
+## follows. below too. You'll need to do ipchains or other port
+## forwarding yourself to make this work.
+#DirPort 80 NoListen
+#DirPort 127.0.0.1:9091 NoAdvertise
+## Uncomment to return an arbitrary blob of html on your DirPort. Now you
+## can explain what Tor is if anybody wonders why your IP address is
+## contacting them. See contrib/tor-exit-notice.html in Tor's source
+## distribution for a sample.
+#DirPortFrontPage /etc/tor/tor-exit-notice.html
+
+## Uncomment this if you run more than one Tor relay, and add the identity
+## key fingerprint of each Tor relay you control, even if they're on
+## different networks. You declare it here so Tor clients can avoid
+## using more than one of your relays in a single circuit. See
+## https://www.torproject.org/docs/faq#MultipleRelays
+## However, you should never include a bridge's fingerprint here, as it would
+## break its concealability and potentionally reveal its IP/TCP address.
+#MyFamily $keyid,$keyid,...
+
+## A comma-separated list of exit policies. They're considered first
+## to last, and the first match wins. If you want to _replace_
+## the default exit policy, end this with either a reject *:* or an
+## accept *:*. Otherwise, you're _augmenting_ (prepending to) the
+## default exit policy. Leave commented to just use the default, which is
+## described in the man page or at
+## https://www.torproject.org/documentation.html
+##
+## Look at https://www.torproject.org/faq-abuse.html#TypicalAbuses
+## for issues you might encounter if you use the default exit policy.
+##
+## If certain IPs and ports are blocked externally, e.g. by your firewall,
+## you should update your exit policy to reflect this -- otherwise Tor
+## users will be told that those destinations are down.
+##
+## For security, by default Tor rejects connections to private (local)
+## networks, including to your public IP address. See the man page entry
+## for ExitPolicyRejectPrivate if you want to allow "exit enclaving".
+##
+#ExitPolicy accept *:6660-6667,reject *:* # allow irc ports but no more
+#ExitPolicy accept *:119 # accept nntp as well as default exit policy
+#ExitPolicy reject *:* # no exits allowed
+
+## Bridge relays (or "bridges") are Tor relays that aren't listed in the
+## main directory. Since there is no complete public list of them, even an
+## ISP that filters connections to all the known Tor relays probably
+## won't be able to block all the bridges. Also, websites won't treat you
+## differently because they won't know you're running Tor. If you can
+## be a real relay, please do; but if not, be a bridge!
+#BridgeRelay 1
+## By default, Tor will advertise your bridge to users through various
+## mechanisms like https://bridges.torproject.org/. If you want to run
+## a private bridge, for example because you'll give out your bridge
+## address manually to your friends, uncomment this line:
+#PublishServerDescriptor 0
+
Deleted: community-x86_64/PKGBUILD
===================================================================
--- community-x86_64/PKGBUILD 2016-10-21 20:04:19 UTC (rev 192887)
+++ community-x86_64/PKGBUILD 2016-10-21 20:04:28 UTC (rev 192888)
@@ -1,47 +0,0 @@
-# Maintainer: Lukas Fleischer <lfleischer at archlinux.org>
-# Contributor: Daniel Micay <danielmicay at gmail.com>
-# Contributor: simo <simo at archlinux.org>
-# Contributor: Sid Karunaratne
-
-pkgname=tor
-pkgver=0.2.8.8
-pkgrel=1
-pkgdesc='Anonymizing overlay network.'
-arch=('i686' 'x86_64')
-url='http://www.torproject.org/'
-license=('BSD')
-depends=('openssl' 'libevent' 'bash' 'libseccomp')
-optdepends=('torsocks: for torify')
-makedepends=('ca-certificates')
-backup=('etc/tor/torrc'
- 'etc/tor/torrc-dist')
-install='tor.install'
-source=("https://www.torproject.org/dist/${pkgname}-${pkgver}.tar.gz"{,.asc}
- 'torrc'
- 'tor.service')
-md5sums=('a9627e1655cab3a3df0da9b0f74aa21b'
- 'SKIP'
- 'c1dd4004c63edaeaa829e01be5413cfc'
- '503cedd9679f9817b2c27916ba989a74')
-validpgpkeys=('B35BF85BF19489D04E28C33C21194EBB165733EA') # Nick Mathewson
-
-build() {
- cd "${srcdir}/${pkgname}-${pkgver}"
-
- ./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var
- make
-}
-
-package() {
- cd "${srcdir}/${pkgname}-${pkgver}"
-
- make DESTDIR="${pkgdir}" install
-
- install -dm0700 -o 43 -g 43 "${pkgdir}/var/lib/tor"
-
- mv "${pkgdir}/etc/tor/torrc.sample" "${pkgdir}/etc/tor/torrc-dist"
- install -Dm0644 "${srcdir}/torrc" "${pkgdir}/etc/tor/torrc"
- install -Dm0644 "${srcdir}/tor.service" "${pkgdir}/usr/lib/systemd/system/tor.service"
-
- install -Dm0644 LICENSE "${pkgdir}/usr/share/licenses/${pkgname}/LICENSE"
-}
Copied: tor/repos/community-x86_64/PKGBUILD (from rev 192887, tor/trunk/PKGBUILD)
===================================================================
--- community-x86_64/PKGBUILD (rev 0)
+++ community-x86_64/PKGBUILD 2016-10-21 20:04:28 UTC (rev 192888)
@@ -0,0 +1,47 @@
+# Maintainer: Lukas Fleischer <lfleischer at archlinux.org>
+# Contributor: Daniel Micay <danielmicay at gmail.com>
+# Contributor: simo <simo at archlinux.org>
+# Contributor: Sid Karunaratne
+
+pkgname=tor
+pkgver=0.2.8.9
+pkgrel=1
+pkgdesc='Anonymizing overlay network.'
+arch=('i686' 'x86_64')
+url='http://www.torproject.org/'
+license=('BSD')
+depends=('openssl' 'libevent' 'bash' 'libseccomp')
+optdepends=('torsocks: for torify')
+makedepends=('ca-certificates')
+backup=('etc/tor/torrc'
+ 'etc/tor/torrc-dist')
+install='tor.install'
+source=("https://www.torproject.org/dist/${pkgname}-${pkgver}.tar.gz"{,.asc}
+ 'torrc'
+ 'tor.service')
+md5sums=('e1f8bc2b2e2b365fc916388304e5e40d'
+ 'SKIP'
+ 'c1dd4004c63edaeaa829e01be5413cfc'
+ '503cedd9679f9817b2c27916ba989a74')
+validpgpkeys=('2133BC600AB133E1D826D173FE43009C4607B1FB') # Nick Mathewson
+
+build() {
+ cd "${srcdir}/${pkgname}-${pkgver}"
+
+ ./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var
+ make
+}
+
+package() {
+ cd "${srcdir}/${pkgname}-${pkgver}"
+
+ make DESTDIR="${pkgdir}" install
+
+ install -dm0700 -o 43 -g 43 "${pkgdir}/var/lib/tor"
+
+ mv "${pkgdir}/etc/tor/torrc.sample" "${pkgdir}/etc/tor/torrc-dist"
+ install -Dm0644 "${srcdir}/torrc" "${pkgdir}/etc/tor/torrc"
+ install -Dm0644 "${srcdir}/tor.service" "${pkgdir}/usr/lib/systemd/system/tor.service"
+
+ install -Dm0644 LICENSE "${pkgdir}/usr/share/licenses/${pkgname}/LICENSE"
+}
Deleted: community-x86_64/tor.install
===================================================================
--- community-x86_64/tor.install 2016-10-21 20:04:19 UTC (rev 192887)
+++ community-x86_64/tor.install 2016-10-21 20:04:28 UTC (rev 192888)
@@ -1,4 +0,0 @@
-post_install() {
- groupadd -g 43 tor &>/dev/null
- useradd -u 43 -g tor -d /var/lib/tor -s /bin/false tor &> /dev/null
-}
Copied: tor/repos/community-x86_64/tor.install (from rev 192887, tor/trunk/tor.install)
===================================================================
--- community-x86_64/tor.install (rev 0)
+++ community-x86_64/tor.install 2016-10-21 20:04:28 UTC (rev 192888)
@@ -0,0 +1,4 @@
+post_install() {
+ groupadd -g 43 tor &>/dev/null
+ useradd -u 43 -g tor -d /var/lib/tor -s /bin/false tor &> /dev/null
+}
Deleted: community-x86_64/tor.service
===================================================================
--- community-x86_64/tor.service 2016-10-21 20:04:19 UTC (rev 192887)
+++ community-x86_64/tor.service 2016-10-21 20:04:28 UTC (rev 192888)
@@ -1,15 +0,0 @@
-[Unit]
-Description=Anonymizing Overlay Network
-After=network.target
-
-[Service]
-User=tor
-Type=simple
-ExecStart=/usr/bin/tor -f /etc/tor/torrc
-ExecReload=/usr/bin/kill -HUP $MAINPID
-KillSignal=SIGINT
-LimitNOFILE=8192
-PrivateDevices=yes
-
-[Install]
-WantedBy=multi-user.target
Copied: tor/repos/community-x86_64/tor.service (from rev 192887, tor/trunk/tor.service)
===================================================================
--- community-x86_64/tor.service (rev 0)
+++ community-x86_64/tor.service 2016-10-21 20:04:28 UTC (rev 192888)
@@ -0,0 +1,15 @@
+[Unit]
+Description=Anonymizing Overlay Network
+After=network.target
+
+[Service]
+User=tor
+Type=simple
+ExecStart=/usr/bin/tor -f /etc/tor/torrc
+ExecReload=/usr/bin/kill -HUP $MAINPID
+KillSignal=SIGINT
+LimitNOFILE=8192
+PrivateDevices=yes
+
+[Install]
+WantedBy=multi-user.target
Deleted: community-x86_64/torrc
===================================================================
--- community-x86_64/torrc 2016-10-21 20:04:19 UTC (rev 192887)
+++ community-x86_64/torrc 2016-10-21 20:04:28 UTC (rev 192888)
@@ -1,189 +0,0 @@
-## Configuration file for a typical Tor user
-## Last updated 22 April 2012 for Tor 0.2.3.14-alpha.
-## (may or may not work for much older or much newer versions of Tor.)
-##
-## Lines that begin with "## " try to explain what's going on. Lines
-## that begin with just "#" are disabled commands: you can enable them
-## by removing the "#" symbol.
-##
-## See 'man tor', or https://www.torproject.org/docs/tor-manual.html,
-## for more options you can use in this file.
-##
-## Tor will look for this file in various places based on your platform:
-## https://www.torproject.org/docs/faq#torrc
-
-## Tor opens a socks proxy on port 9050 by default -- even if you don't
-## configure one below. Set "SocksPort 0" if you plan to run Tor only
-## as a relay, and not make any local application connections yourself.
-#SocksPort 9050 # Default: Bind to localhost:9050 for local connections.
-#SocksPort 192.168.0.1:9100 # Bind to this adddress:port too.
-
-## Entry policies to allow/deny SOCKS requests based on IP address.
-## First entry that matches wins. If no SocksPolicy is set, we accept
-## all (and only) requests that reach a SocksPort. Untrusted users who
-## can access your SocksPort may be able to learn about the connections
-## you make.
-#SocksPolicy accept 192.168.0.0/16
-#SocksPolicy reject *
-
-## Logs go to stdout at level "notice" unless redirected by something
-## else, like one of the below lines. You can have as many Log lines as
-## you want.
-##
-## We advise using "notice" in most cases, since anything more verbose
-## may provide sensitive information to an attacker who obtains the logs.
-##
-## Send all messages of level 'notice' or higher to /var/log/tor/notices.log
-#Log notice file /var/log/tor/notices.log
-## Send every possible message to /var/log/tor/debug.log
-#Log debug file /var/log/tor/debug.log
-## Use the system log instead of Tor's logfiles
-Log notice syslog
-## To send all messages to stderr:
-#Log debug stderr
-
-## Uncomment this to start the process in the background... or use
-## --runasdaemon 1 on the command line. This is ignored on Windows;
-## see the FAQ entry if you want Tor to run as an NT service.
-#RunAsDaemon 1
-
-## The directory for keeping all the keys/etc. By default, we store
-## things in $HOME/.tor on Unix, and in Application Data\tor on Windows.
-DataDirectory /var/lib/tor
-
-## The port on which Tor will listen for local connections from Tor
-## controller applications, as documented in control-spec.txt.
-#ControlPort 9051
-## If you enable the controlport, be sure to enable one of these
-## authentication methods, to prevent attackers from accessing it.
-#HashedControlPassword 16:872860B76453A77D60CA2BB8C1A7042072093276A3D701AD684053EC4C
-#CookieAuthentication 1
-
-############### This section is just for location-hidden services ###
-
-## Once you have configured a hidden service, you can look at the
-## contents of the file ".../hidden_service/hostname" for the address
-## to tell people.
-##
-## HiddenServicePort x y:z says to redirect requests on port x to the
-## address y:z.
-
-#HiddenServiceDir /var/lib/tor/hidden_service/
-#HiddenServicePort 80 127.0.0.1:80
-
-#HiddenServiceDir /var/lib/tor/other_hidden_service/
-#HiddenServicePort 80 127.0.0.1:80
-#HiddenServicePort 22 127.0.0.1:22
-
-################ This section is just for relays #####################
-#
-## See https://www.torproject.org/docs/tor-doc-relay for details.
-
-## Required: what port to advertise for incoming Tor connections.
-#ORPort 9001
-## If you want to listen on a port other than the one advertised in
-## ORPort (e.g. to advertise 443 but bind to 9090), you can do it as
-## follows. You'll need to do ipchains or other port forwarding
-## yourself to make this work.
-#ORPort 443 NoListen
-#ORPort 127.0.0.1:9090 NoAdvertise
-
-## The IP address or full DNS name for incoming connections to your
-## relay. Leave commented out and Tor will guess.
-#Address noname.example.com
-
-## If you have multiple network interfaces, you can specify one for
-## outgoing traffic to use.
-# OutboundBindAddress 10.0.0.5
-
-## A handle for your relay, so people don't have to refer to it by key.
-#Nickname ididnteditheconfig
-
-## Define these to limit how much relayed traffic you will allow. Your
-## own traffic is still unthrottled. Note that RelayBandwidthRate must
-## be at least 20 KB.
-## Note that units for these config options are bytes per second, not bits
-## per second, and that prefixes are binary prefixes, i.e. 2^10, 2^20, etc.
-#RelayBandwidthRate 100 KB # Throttle traffic to 100KB/s (800Kbps)
-#RelayBandwidthBurst 200 KB # But allow bursts up to 200KB/s (1600Kbps)
-
-## Use these to restrict the maximum traffic per day, week, or month.
-## Note that this threshold applies separately to sent and received bytes,
-## not to their sum: setting "4 GB" may allow up to 8 GB total before
-## hibernating.
-##
-## Set a maximum of 4 gigabytes each way per period.
-#AccountingMax 4 GB
-## Each period starts daily at midnight (AccountingMax is per day)
-#AccountingStart day 00:00
-## Each period starts on the 3rd of the month at 15:00 (AccountingMax
-## is per month)
-#AccountingStart month 3 15:00
-
-## Contact info to be published in the directory, so we can contact you
-## if your relay is misconfigured or something else goes wrong. Google
-## indexes this, so spammers might also collect it.
-#ContactInfo Random Person <nobody AT example dot com>
-## You might also include your PGP or GPG fingerprint if you have one:
-#ContactInfo 0xFFFFFFFF Random Person <nobody AT example dot com>
-
-## Uncomment this to mirror directory information for others. Please do
-## if you have enough bandwidth.
-#DirPort 9030 # what port to advertise for directory connections
-## If you want to listen on a port other than the one advertised in
-## DirPort (e.g. to advertise 80 but bind to 9091), you can do it as
-## follows. below too. You'll need to do ipchains or other port
-## forwarding yourself to make this work.
-#DirPort 80 NoListen
-#DirPort 127.0.0.1:9091 NoAdvertise
-## Uncomment to return an arbitrary blob of html on your DirPort. Now you
-## can explain what Tor is if anybody wonders why your IP address is
-## contacting them. See contrib/tor-exit-notice.html in Tor's source
-## distribution for a sample.
-#DirPortFrontPage /etc/tor/tor-exit-notice.html
-
-## Uncomment this if you run more than one Tor relay, and add the identity
-## key fingerprint of each Tor relay you control, even if they're on
-## different networks. You declare it here so Tor clients can avoid
-## using more than one of your relays in a single circuit. See
-## https://www.torproject.org/docs/faq#MultipleRelays
-## However, you should never include a bridge's fingerprint here, as it would
-## break its concealability and potentionally reveal its IP/TCP address.
-#MyFamily $keyid,$keyid,...
-
-## A comma-separated list of exit policies. They're considered first
-## to last, and the first match wins. If you want to _replace_
-## the default exit policy, end this with either a reject *:* or an
-## accept *:*. Otherwise, you're _augmenting_ (prepending to) the
-## default exit policy. Leave commented to just use the default, which is
-## described in the man page or at
-## https://www.torproject.org/documentation.html
-##
-## Look at https://www.torproject.org/faq-abuse.html#TypicalAbuses
-## for issues you might encounter if you use the default exit policy.
-##
-## If certain IPs and ports are blocked externally, e.g. by your firewall,
-## you should update your exit policy to reflect this -- otherwise Tor
-## users will be told that those destinations are down.
-##
-## For security, by default Tor rejects connections to private (local)
-## networks, including to your public IP address. See the man page entry
-## for ExitPolicyRejectPrivate if you want to allow "exit enclaving".
-##
-#ExitPolicy accept *:6660-6667,reject *:* # allow irc ports but no more
-#ExitPolicy accept *:119 # accept nntp as well as default exit policy
-#ExitPolicy reject *:* # no exits allowed
-
-## Bridge relays (or "bridges") are Tor relays that aren't listed in the
-## main directory. Since there is no complete public list of them, even an
-## ISP that filters connections to all the known Tor relays probably
-## won't be able to block all the bridges. Also, websites won't treat you
-## differently because they won't know you're running Tor. If you can
-## be a real relay, please do; but if not, be a bridge!
-#BridgeRelay 1
-## By default, Tor will advertise your bridge to users through various
-## mechanisms like https://bridges.torproject.org/. If you want to run
-## a private bridge, for example because you'll give out your bridge
-## address manually to your friends, uncomment this line:
-#PublishServerDescriptor 0
-
Copied: tor/repos/community-x86_64/torrc (from rev 192887, tor/trunk/torrc)
===================================================================
--- community-x86_64/torrc (rev 0)
+++ community-x86_64/torrc 2016-10-21 20:04:28 UTC (rev 192888)
@@ -0,0 +1,189 @@
+## Configuration file for a typical Tor user
+## Last updated 22 April 2012 for Tor 0.2.3.14-alpha.
+## (may or may not work for much older or much newer versions of Tor.)
+##
+## Lines that begin with "## " try to explain what's going on. Lines
+## that begin with just "#" are disabled commands: you can enable them
+## by removing the "#" symbol.
+##
+## See 'man tor', or https://www.torproject.org/docs/tor-manual.html,
+## for more options you can use in this file.
+##
+## Tor will look for this file in various places based on your platform:
+## https://www.torproject.org/docs/faq#torrc
+
+## Tor opens a socks proxy on port 9050 by default -- even if you don't
+## configure one below. Set "SocksPort 0" if you plan to run Tor only
+## as a relay, and not make any local application connections yourself.
+#SocksPort 9050 # Default: Bind to localhost:9050 for local connections.
+#SocksPort 192.168.0.1:9100 # Bind to this adddress:port too.
+
+## Entry policies to allow/deny SOCKS requests based on IP address.
+## First entry that matches wins. If no SocksPolicy is set, we accept
+## all (and only) requests that reach a SocksPort. Untrusted users who
+## can access your SocksPort may be able to learn about the connections
+## you make.
+#SocksPolicy accept 192.168.0.0/16
+#SocksPolicy reject *
+
+## Logs go to stdout at level "notice" unless redirected by something
+## else, like one of the below lines. You can have as many Log lines as
+## you want.
+##
+## We advise using "notice" in most cases, since anything more verbose
+## may provide sensitive information to an attacker who obtains the logs.
+##
+## Send all messages of level 'notice' or higher to /var/log/tor/notices.log
+#Log notice file /var/log/tor/notices.log
+## Send every possible message to /var/log/tor/debug.log
+#Log debug file /var/log/tor/debug.log
+## Use the system log instead of Tor's logfiles
+Log notice syslog
+## To send all messages to stderr:
+#Log debug stderr
+
+## Uncomment this to start the process in the background... or use
+## --runasdaemon 1 on the command line. This is ignored on Windows;
+## see the FAQ entry if you want Tor to run as an NT service.
+#RunAsDaemon 1
+
+## The directory for keeping all the keys/etc. By default, we store
+## things in $HOME/.tor on Unix, and in Application Data\tor on Windows.
+DataDirectory /var/lib/tor
+
+## The port on which Tor will listen for local connections from Tor
+## controller applications, as documented in control-spec.txt.
+#ControlPort 9051
+## If you enable the controlport, be sure to enable one of these
+## authentication methods, to prevent attackers from accessing it.
+#HashedControlPassword 16:872860B76453A77D60CA2BB8C1A7042072093276A3D701AD684053EC4C
+#CookieAuthentication 1
+
+############### This section is just for location-hidden services ###
+
+## Once you have configured a hidden service, you can look at the
+## contents of the file ".../hidden_service/hostname" for the address
+## to tell people.
+##
+## HiddenServicePort x y:z says to redirect requests on port x to the
+## address y:z.
+
+#HiddenServiceDir /var/lib/tor/hidden_service/
+#HiddenServicePort 80 127.0.0.1:80
+
+#HiddenServiceDir /var/lib/tor/other_hidden_service/
+#HiddenServicePort 80 127.0.0.1:80
+#HiddenServicePort 22 127.0.0.1:22
+
+################ This section is just for relays #####################
+#
+## See https://www.torproject.org/docs/tor-doc-relay for details.
+
+## Required: what port to advertise for incoming Tor connections.
+#ORPort 9001
+## If you want to listen on a port other than the one advertised in
+## ORPort (e.g. to advertise 443 but bind to 9090), you can do it as
+## follows. You'll need to do ipchains or other port forwarding
+## yourself to make this work.
+#ORPort 443 NoListen
+#ORPort 127.0.0.1:9090 NoAdvertise
+
+## The IP address or full DNS name for incoming connections to your
+## relay. Leave commented out and Tor will guess.
+#Address noname.example.com
+
+## If you have multiple network interfaces, you can specify one for
+## outgoing traffic to use.
+# OutboundBindAddress 10.0.0.5
+
+## A handle for your relay, so people don't have to refer to it by key.
+#Nickname ididnteditheconfig
+
+## Define these to limit how much relayed traffic you will allow. Your
+## own traffic is still unthrottled. Note that RelayBandwidthRate must
+## be at least 20 KB.
+## Note that units for these config options are bytes per second, not bits
+## per second, and that prefixes are binary prefixes, i.e. 2^10, 2^20, etc.
+#RelayBandwidthRate 100 KB # Throttle traffic to 100KB/s (800Kbps)
+#RelayBandwidthBurst 200 KB # But allow bursts up to 200KB/s (1600Kbps)
+
+## Use these to restrict the maximum traffic per day, week, or month.
+## Note that this threshold applies separately to sent and received bytes,
+## not to their sum: setting "4 GB" may allow up to 8 GB total before
+## hibernating.
+##
+## Set a maximum of 4 gigabytes each way per period.
+#AccountingMax 4 GB
+## Each period starts daily at midnight (AccountingMax is per day)
+#AccountingStart day 00:00
+## Each period starts on the 3rd of the month at 15:00 (AccountingMax
+## is per month)
+#AccountingStart month 3 15:00
+
+## Contact info to be published in the directory, so we can contact you
+## if your relay is misconfigured or something else goes wrong. Google
+## indexes this, so spammers might also collect it.
+#ContactInfo Random Person <nobody AT example dot com>
+## You might also include your PGP or GPG fingerprint if you have one:
+#ContactInfo 0xFFFFFFFF Random Person <nobody AT example dot com>
+
+## Uncomment this to mirror directory information for others. Please do
+## if you have enough bandwidth.
+#DirPort 9030 # what port to advertise for directory connections
+## If you want to listen on a port other than the one advertised in
+## DirPort (e.g. to advertise 80 but bind to 9091), you can do it as
+## follows. below too. You'll need to do ipchains or other port
+## forwarding yourself to make this work.
+#DirPort 80 NoListen
+#DirPort 127.0.0.1:9091 NoAdvertise
+## Uncomment to return an arbitrary blob of html on your DirPort. Now you
+## can explain what Tor is if anybody wonders why your IP address is
+## contacting them. See contrib/tor-exit-notice.html in Tor's source
+## distribution for a sample.
+#DirPortFrontPage /etc/tor/tor-exit-notice.html
+
+## Uncomment this if you run more than one Tor relay, and add the identity
+## key fingerprint of each Tor relay you control, even if they're on
+## different networks. You declare it here so Tor clients can avoid
+## using more than one of your relays in a single circuit. See
+## https://www.torproject.org/docs/faq#MultipleRelays
+## However, you should never include a bridge's fingerprint here, as it would
+## break its concealability and potentionally reveal its IP/TCP address.
+#MyFamily $keyid,$keyid,...
+
+## A comma-separated list of exit policies. They're considered first
+## to last, and the first match wins. If you want to _replace_
+## the default exit policy, end this with either a reject *:* or an
+## accept *:*. Otherwise, you're _augmenting_ (prepending to) the
+## default exit policy. Leave commented to just use the default, which is
+## described in the man page or at
+## https://www.torproject.org/documentation.html
+##
+## Look at https://www.torproject.org/faq-abuse.html#TypicalAbuses
+## for issues you might encounter if you use the default exit policy.
+##
+## If certain IPs and ports are blocked externally, e.g. by your firewall,
+## you should update your exit policy to reflect this -- otherwise Tor
+## users will be told that those destinations are down.
+##
+## For security, by default Tor rejects connections to private (local)
+## networks, including to your public IP address. See the man page entry
+## for ExitPolicyRejectPrivate if you want to allow "exit enclaving".
+##
+#ExitPolicy accept *:6660-6667,reject *:* # allow irc ports but no more
+#ExitPolicy accept *:119 # accept nntp as well as default exit policy
+#ExitPolicy reject *:* # no exits allowed
+
+## Bridge relays (or "bridges") are Tor relays that aren't listed in the
+## main directory. Since there is no complete public list of them, even an
+## ISP that filters connections to all the known Tor relays probably
+## won't be able to block all the bridges. Also, websites won't treat you
+## differently because they won't know you're running Tor. If you can
+## be a real relay, please do; but if not, be a bridge!
+#BridgeRelay 1
+## By default, Tor will advertise your bridge to users through various
+## mechanisms like https://bridges.torproject.org/. If you want to run
+## a private bridge, for example because you'll give out your bridge
+## address manually to your friends, uncomment this line:
+#PublishServerDescriptor 0
+
More information about the arch-commits
mailing list