[arch-commits] Commit in linux-hardened/trunk (2 files)

Daniel Micay thestinger at archlinux.org
Wed Aug 30 17:29:27 UTC 2017


    Date: Wednesday, August 30, 2017 @ 17:29:27
  Author: thestinger
Revision: 254793

upgpkg: linux-hardened 4.12.10.a-1

Deleted:
  linux-hardened/trunk/bonding-ratelimit-failed-speed-duplex-update-warning.patch
  linux-hardened/trunk/bonding-require-speed-duplex-only-for-802.3ad-alb-an.patch

------------------------------------------------------------+
 bonding-ratelimit-failed-speed-duplex-update-warning.patch |   47 -------
 bonding-require-speed-duplex-only-for-802.3ad-alb-an.patch |   68 -----------
 2 files changed, 115 deletions(-)

Deleted: bonding-ratelimit-failed-speed-duplex-update-warning.patch
===================================================================
--- bonding-ratelimit-failed-speed-duplex-update-warning.patch	2017-08-30 17:28:27 UTC (rev 254792)
+++ bonding-ratelimit-failed-speed-duplex-update-warning.patch	2017-08-30 17:29:27 UTC (rev 254793)
@@ -1,47 +0,0 @@
-From 11e9d7829dd08dbafb24517fe922f11c3a8a9dc2 Mon Sep 17 00:00:00 2001
-From: Andreas Born <futur.andy at googlemail.com>
-Date: Sat, 12 Aug 2017 00:36:55 +0200
-Subject: [PATCH] bonding: ratelimit failed speed/duplex update warning
-
-bond_miimon_commit() handles the UP transition for each slave of a bond
-in the case of MII. It is triggered 10 times per second for the default
-MII Polling interval of 100ms. For device drivers that do not implement
-__ethtool_get_link_ksettings() the call to bond_update_speed_duplex()
-fails persistently while the MII status could remain UP. That is, in
-this and other cases where the speed/duplex update keeps failing over a
-longer period of time while the MII state is UP, a warning is printed
-every MII polling interval.
-
-To address these excessive warnings net_ratelimit() should be used.
-Printing a warning once would not be sufficient since the call to
-bond_update_speed_duplex() could recover to succeed and fail again
-later. In that case there would be no new indication what went wrong.
-
-Fixes: b5bf0f5b16b9c (bonding: correctly update link status during mii-commit phase)
-Signed-off-by: Andreas Born <futur.andy at googlemail.com>
-Signed-off-by: David S. Miller <davem at davemloft.net>
----
- drivers/net/bonding/bond_main.c | 7 ++++---
- 1 file changed, 4 insertions(+), 3 deletions(-)
-
-diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
-index 85bb272d2a34..fc63992ab0e0 100644
---- a/drivers/net/bonding/bond_main.c
-+++ b/drivers/net/bonding/bond_main.c
-@@ -2144,9 +2144,10 @@ static void bond_miimon_commit(struct bonding *bond)
- 			if (bond_update_speed_duplex(slave) &&
- 			    bond_needs_speed_duplex(bond)) {
- 				slave->link = BOND_LINK_DOWN;
--				netdev_warn(bond->dev,
--					    "failed to get link speed/duplex for %s\n",
--					    slave->dev->name);
-+				if (net_ratelimit())
-+					netdev_warn(bond->dev,
-+						    "failed to get link speed/duplex for %s\n",
-+						    slave->dev->name);
- 				continue;
- 			}
- 			bond_set_slave_link_state(slave, BOND_LINK_UP,
--- 
-2.14.1
-

Deleted: bonding-require-speed-duplex-only-for-802.3ad-alb-an.patch
===================================================================
--- bonding-require-speed-duplex-only-for-802.3ad-alb-an.patch	2017-08-30 17:28:27 UTC (rev 254792)
+++ bonding-require-speed-duplex-only-for-802.3ad-alb-an.patch	2017-08-30 17:29:27 UTC (rev 254793)
@@ -1,68 +0,0 @@
-From ad729bc9acfb7c47112964b4877ef5404578ed13 Mon Sep 17 00:00:00 2001
-From: Andreas Born <futur.andy at googlemail.com>
-Date: Thu, 10 Aug 2017 06:41:44 +0200
-Subject: [PATCH] bonding: require speed/duplex only for 802.3ad, alb and tlb
-
-The patch c4adfc822bf5 ("bonding: make speed, duplex setting consistent
-with link state") puts the link state to down if
-bond_update_speed_duplex() cannot retrieve speed and duplex settings.
-Assumably the patch was written with 802.3ad mode in mind which relies
-on link speed/duplex settings. For other modes like active-backup these
-settings are not required. Thus, only for these other modes, this patch
-reintroduces support for slaves that do not support reporting speed or
-duplex such as wireless devices. This fixes the regression reported in
-bug 196547 (https://bugzilla.kernel.org/show_bug.cgi?id=196547).
-
-Fixes: c4adfc822bf5 ("bonding: make speed, duplex setting consistent
-with link state")
-Signed-off-by: Andreas Born <futur.andy at googlemail.com>
-Acked-by: Mahesh Bandewar <maheshb at google.com>
-Signed-off-by: David S. Miller <davem at davemloft.net>
----
- drivers/net/bonding/bond_main.c | 6 ++++--
- include/net/bonding.h           | 5 +++++
- 2 files changed, 9 insertions(+), 2 deletions(-)
-
-diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
-index 9bee6c1c70cc..85bb272d2a34 100644
---- a/drivers/net/bonding/bond_main.c
-+++ b/drivers/net/bonding/bond_main.c
-@@ -1569,7 +1569,8 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
- 	new_slave->delay = 0;
- 	new_slave->link_failure_count = 0;
- 
--	if (bond_update_speed_duplex(new_slave))
-+	if (bond_update_speed_duplex(new_slave) &&
-+	    bond_needs_speed_duplex(bond))
- 		new_slave->link = BOND_LINK_DOWN;
- 
- 	new_slave->last_rx = jiffies -
-@@ -2140,7 +2141,8 @@ static void bond_miimon_commit(struct bonding *bond)
- 			continue;
- 
- 		case BOND_LINK_UP:
--			if (bond_update_speed_duplex(slave)) {
-+			if (bond_update_speed_duplex(slave) &&
-+			    bond_needs_speed_duplex(bond)) {
- 				slave->link = BOND_LINK_DOWN;
- 				netdev_warn(bond->dev,
- 					    "failed to get link speed/duplex for %s\n",
-diff --git a/include/net/bonding.h b/include/net/bonding.h
-index b00508d22e0a..b2e68657a216 100644
---- a/include/net/bonding.h
-+++ b/include/net/bonding.h
-@@ -277,6 +277,11 @@ static inline bool bond_is_lb(const struct bonding *bond)
- 	       BOND_MODE(bond) == BOND_MODE_ALB;
- }
- 
-+static inline bool bond_needs_speed_duplex(const struct bonding *bond)
-+{
-+	return BOND_MODE(bond) == BOND_MODE_8023AD || bond_is_lb(bond);
-+}
-+
- static inline bool bond_is_nondyn_tlb(const struct bonding *bond)
- {
- 	return (BOND_MODE(bond) == BOND_MODE_TLB)  &&
--- 
-2.14.1
-



More information about the arch-commits mailing list