[arch-commits] Commit in tor/repos (10 files)

Lukas Fleischer lfleischer at archlinux.org
Sat Feb 25 15:45:46 UTC 2017


    Date: Saturday, February 25, 2017 @ 15:45:45
  Author: lfleischer
Revision: 213791

archrelease: copy trunk to community-staging-i686, community-staging-x86_64

Added:
  tor/repos/community-staging-i686/
  tor/repos/community-staging-i686/PKGBUILD
    (from rev 213790, tor/trunk/PKGBUILD)
  tor/repos/community-staging-i686/tor.install
    (from rev 213790, tor/trunk/tor.install)
  tor/repos/community-staging-i686/tor.service
    (from rev 213790, tor/trunk/tor.service)
  tor/repos/community-staging-i686/torrc
    (from rev 213790, tor/trunk/torrc)
  tor/repos/community-staging-x86_64/
  tor/repos/community-staging-x86_64/PKGBUILD
    (from rev 213790, tor/trunk/PKGBUILD)
  tor/repos/community-staging-x86_64/tor.install
    (from rev 213790, tor/trunk/tor.install)
  tor/repos/community-staging-x86_64/tor.service
    (from rev 213790, tor/trunk/tor.service)
  tor/repos/community-staging-x86_64/torrc
    (from rev 213790, tor/trunk/torrc)

--------------------------------------+
 community-staging-i686/PKGBUILD      |   47 ++++++++
 community-staging-i686/tor.install   |    4 
 community-staging-i686/tor.service   |   15 ++
 community-staging-i686/torrc         |  189 +++++++++++++++++++++++++++++++++
 community-staging-x86_64/PKGBUILD    |   47 ++++++++
 community-staging-x86_64/tor.install |    4 
 community-staging-x86_64/tor.service |   15 ++
 community-staging-x86_64/torrc       |  189 +++++++++++++++++++++++++++++++++
 8 files changed, 510 insertions(+)

Copied: tor/repos/community-staging-i686/PKGBUILD (from rev 213790, tor/trunk/PKGBUILD)
===================================================================
--- community-staging-i686/PKGBUILD	                        (rev 0)
+++ community-staging-i686/PKGBUILD	2017-02-25 15:45:45 UTC (rev 213791)
@@ -0,0 +1,47 @@
+# Maintainer: Lukas Fleischer <lfleischer at archlinux.org>
+# Contributor: Daniel Micay <danielmicay at gmail.com>
+# Contributor: simo <simo at archlinux.org>
+# Contributor: Sid Karunaratne
+
+pkgname=tor
+pkgver=0.2.9.9
+pkgrel=2
+pkgdesc='Anonymizing overlay network.'
+arch=('i686' 'x86_64')
+url='http://www.torproject.org/'
+license=('BSD')
+depends=('openssl' 'libevent' 'bash' 'libseccomp')
+optdepends=('torsocks: for torify')
+makedepends=('ca-certificates')
+backup=('etc/tor/torrc'
+        'etc/tor/torrc-dist')
+install='tor.install'
+source=("https://www.torproject.org/dist/${pkgname}-${pkgver}.tar.gz"{,.asc}
+        'torrc'
+        'tor.service')
+md5sums=('d9d8a2d1f65c151eb2b448f6a93fc326'
+         'SKIP'
+         'c1dd4004c63edaeaa829e01be5413cfc'
+         '503cedd9679f9817b2c27916ba989a74')
+validpgpkeys=('2133BC600AB133E1D826D173FE43009C4607B1FB') # Nick Mathewson
+
+build() {
+  cd "${srcdir}/${pkgname}-${pkgver}"
+
+  ./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var
+  make
+}
+
+package() {
+  cd "${srcdir}/${pkgname}-${pkgver}"
+
+  make DESTDIR="${pkgdir}" install
+
+  install -dm0700 -o 43 -g 43 "${pkgdir}/var/lib/tor"
+
+  mv "${pkgdir}/etc/tor/torrc.sample" "${pkgdir}/etc/tor/torrc-dist"
+  install -Dm0644 "${srcdir}/torrc" "${pkgdir}/etc/tor/torrc"
+  install -Dm0644 "${srcdir}/tor.service" "${pkgdir}/usr/lib/systemd/system/tor.service"
+
+  install -Dm0644 LICENSE "${pkgdir}/usr/share/licenses/${pkgname}/LICENSE"
+}

Copied: tor/repos/community-staging-i686/tor.install (from rev 213790, tor/trunk/tor.install)
===================================================================
--- community-staging-i686/tor.install	                        (rev 0)
+++ community-staging-i686/tor.install	2017-02-25 15:45:45 UTC (rev 213791)
@@ -0,0 +1,4 @@
+post_install() {
+  groupadd -g 43 tor &>/dev/null
+  useradd -u 43 -g tor -d /var/lib/tor -s /bin/false tor &> /dev/null
+}

Copied: tor/repos/community-staging-i686/tor.service (from rev 213790, tor/trunk/tor.service)
===================================================================
--- community-staging-i686/tor.service	                        (rev 0)
+++ community-staging-i686/tor.service	2017-02-25 15:45:45 UTC (rev 213791)
@@ -0,0 +1,15 @@
+[Unit]
+Description=Anonymizing Overlay Network
+After=network.target
+
+[Service]
+User=tor
+Type=simple
+ExecStart=/usr/bin/tor -f /etc/tor/torrc
+ExecReload=/usr/bin/kill -HUP $MAINPID
+KillSignal=SIGINT
+LimitNOFILE=8192
+PrivateDevices=yes
+
+[Install]
+WantedBy=multi-user.target

Copied: tor/repos/community-staging-i686/torrc (from rev 213790, tor/trunk/torrc)
===================================================================
--- community-staging-i686/torrc	                        (rev 0)
+++ community-staging-i686/torrc	2017-02-25 15:45:45 UTC (rev 213791)
@@ -0,0 +1,189 @@
+## Configuration file for a typical Tor user
+## Last updated 22 April 2012 for Tor 0.2.3.14-alpha.
+## (may or may not work for much older or much newer versions of Tor.)
+##
+## Lines that begin with "## " try to explain what's going on. Lines
+## that begin with just "#" are disabled commands: you can enable them
+## by removing the "#" symbol.
+##
+## See 'man tor', or https://www.torproject.org/docs/tor-manual.html,
+## for more options you can use in this file.
+##
+## Tor will look for this file in various places based on your platform:
+## https://www.torproject.org/docs/faq#torrc
+
+## Tor opens a socks proxy on port 9050 by default -- even if you don't
+## configure one below. Set "SocksPort 0" if you plan to run Tor only
+## as a relay, and not make any local application connections yourself.
+#SocksPort 9050 # Default: Bind to localhost:9050 for local connections.
+#SocksPort 192.168.0.1:9100 # Bind to this adddress:port too.
+
+## Entry policies to allow/deny SOCKS requests based on IP address.
+## First entry that matches wins. If no SocksPolicy is set, we accept
+## all (and only) requests that reach a SocksPort. Untrusted users who
+## can access your SocksPort may be able to learn about the connections
+## you make.
+#SocksPolicy accept 192.168.0.0/16
+#SocksPolicy reject *
+
+## Logs go to stdout at level "notice" unless redirected by something
+## else, like one of the below lines. You can have as many Log lines as
+## you want.
+##
+## We advise using "notice" in most cases, since anything more verbose
+## may provide sensitive information to an attacker who obtains the logs.
+##
+## Send all messages of level 'notice' or higher to /var/log/tor/notices.log
+#Log notice file /var/log/tor/notices.log
+## Send every possible message to /var/log/tor/debug.log
+#Log debug file /var/log/tor/debug.log
+## Use the system log instead of Tor's logfiles
+Log notice syslog
+## To send all messages to stderr:
+#Log debug stderr
+
+## Uncomment this to start the process in the background... or use
+## --runasdaemon 1 on the command line. This is ignored on Windows;
+## see the FAQ entry if you want Tor to run as an NT service.
+#RunAsDaemon 1
+
+## The directory for keeping all the keys/etc. By default, we store
+## things in $HOME/.tor on Unix, and in Application Data\tor on Windows.
+DataDirectory /var/lib/tor
+
+## The port on which Tor will listen for local connections from Tor
+## controller applications, as documented in control-spec.txt.
+#ControlPort 9051
+## If you enable the controlport, be sure to enable one of these
+## authentication methods, to prevent attackers from accessing it.
+#HashedControlPassword 16:872860B76453A77D60CA2BB8C1A7042072093276A3D701AD684053EC4C
+#CookieAuthentication 1
+
+############### This section is just for location-hidden services ###
+
+## Once you have configured a hidden service, you can look at the
+## contents of the file ".../hidden_service/hostname" for the address
+## to tell people.
+##
+## HiddenServicePort x y:z says to redirect requests on port x to the
+## address y:z.
+
+#HiddenServiceDir /var/lib/tor/hidden_service/
+#HiddenServicePort 80 127.0.0.1:80
+
+#HiddenServiceDir /var/lib/tor/other_hidden_service/
+#HiddenServicePort 80 127.0.0.1:80
+#HiddenServicePort 22 127.0.0.1:22
+
+################ This section is just for relays #####################
+#
+## See https://www.torproject.org/docs/tor-doc-relay for details.
+
+## Required: what port to advertise for incoming Tor connections.
+#ORPort 9001
+## If you want to listen on a port other than the one advertised in
+## ORPort (e.g. to advertise 443 but bind to 9090), you can do it as
+## follows.  You'll need to do ipchains or other port forwarding
+## yourself to make this work.
+#ORPort 443 NoListen
+#ORPort 127.0.0.1:9090 NoAdvertise
+
+## The IP address or full DNS name for incoming connections to your
+## relay. Leave commented out and Tor will guess.
+#Address noname.example.com
+
+## If you have multiple network interfaces, you can specify one for
+## outgoing traffic to use.
+# OutboundBindAddress 10.0.0.5
+
+## A handle for your relay, so people don't have to refer to it by key.
+#Nickname ididnteditheconfig
+
+## Define these to limit how much relayed traffic you will allow. Your
+## own traffic is still unthrottled. Note that RelayBandwidthRate must
+## be at least 20 KB.
+## Note that units for these config options are bytes per second, not bits
+## per second, and that prefixes are binary prefixes, i.e. 2^10, 2^20, etc.
+#RelayBandwidthRate 100 KB  # Throttle traffic to 100KB/s (800Kbps)
+#RelayBandwidthBurst 200 KB # But allow bursts up to 200KB/s (1600Kbps)
+
+## Use these to restrict the maximum traffic per day, week, or month.
+## Note that this threshold applies separately to sent and received bytes,
+## not to their sum: setting "4 GB" may allow up to 8 GB total before
+## hibernating.
+##
+## Set a maximum of 4 gigabytes each way per period.
+#AccountingMax 4 GB
+## Each period starts daily at midnight (AccountingMax is per day)
+#AccountingStart day 00:00
+## Each period starts on the 3rd of the month at 15:00 (AccountingMax
+## is per month)
+#AccountingStart month 3 15:00
+
+## Contact info to be published in the directory, so we can contact you
+## if your relay is misconfigured or something else goes wrong. Google
+## indexes this, so spammers might also collect it.
+#ContactInfo Random Person <nobody AT example dot com>
+## You might also include your PGP or GPG fingerprint if you have one:
+#ContactInfo 0xFFFFFFFF Random Person <nobody AT example dot com>
+
+## Uncomment this to mirror directory information for others. Please do
+## if you have enough bandwidth.
+#DirPort 9030 # what port to advertise for directory connections
+## If you want to listen on a port other than the one advertised in
+## DirPort (e.g. to advertise 80 but bind to 9091), you can do it as
+## follows.  below too. You'll need to do ipchains or other port
+## forwarding yourself to make this work.
+#DirPort 80 NoListen
+#DirPort 127.0.0.1:9091 NoAdvertise
+## Uncomment to return an arbitrary blob of html on your DirPort. Now you
+## can explain what Tor is if anybody wonders why your IP address is
+## contacting them. See contrib/tor-exit-notice.html in Tor's source
+## distribution for a sample.
+#DirPortFrontPage /etc/tor/tor-exit-notice.html
+
+## Uncomment this if you run more than one Tor relay, and add the identity
+## key fingerprint of each Tor relay you control, even if they're on
+## different networks. You declare it here so Tor clients can avoid
+## using more than one of your relays in a single circuit. See
+## https://www.torproject.org/docs/faq#MultipleRelays
+## However, you should never include a bridge's fingerprint here, as it would
+## break its concealability and potentionally reveal its IP/TCP address.
+#MyFamily $keyid,$keyid,...
+
+## A comma-separated list of exit policies. They're considered first
+## to last, and the first match wins. If you want to _replace_
+## the default exit policy, end this with either a reject *:* or an
+## accept *:*. Otherwise, you're _augmenting_ (prepending to) the
+## default exit policy. Leave commented to just use the default, which is
+## described in the man page or at
+## https://www.torproject.org/documentation.html
+##
+## Look at https://www.torproject.org/faq-abuse.html#TypicalAbuses
+## for issues you might encounter if you use the default exit policy.
+##
+## If certain IPs and ports are blocked externally, e.g. by your firewall,
+## you should update your exit policy to reflect this -- otherwise Tor
+## users will be told that those destinations are down.
+##
+## For security, by default Tor rejects connections to private (local)
+## networks, including to your public IP address. See the man page entry
+## for ExitPolicyRejectPrivate if you want to allow "exit enclaving".
+##
+#ExitPolicy accept *:6660-6667,reject *:* # allow irc ports but no more
+#ExitPolicy accept *:119 # accept nntp as well as default exit policy
+#ExitPolicy reject *:* # no exits allowed
+
+## Bridge relays (or "bridges") are Tor relays that aren't listed in the
+## main directory. Since there is no complete public list of them, even an
+## ISP that filters connections to all the known Tor relays probably
+## won't be able to block all the bridges. Also, websites won't treat you
+## differently because they won't know you're running Tor. If you can
+## be a real relay, please do; but if not, be a bridge!
+#BridgeRelay 1
+## By default, Tor will advertise your bridge to users through various
+## mechanisms like https://bridges.torproject.org/. If you want to run
+## a private bridge, for example because you'll give out your bridge
+## address manually to your friends, uncomment this line:
+#PublishServerDescriptor 0
+

Copied: tor/repos/community-staging-x86_64/PKGBUILD (from rev 213790, tor/trunk/PKGBUILD)
===================================================================
--- community-staging-x86_64/PKGBUILD	                        (rev 0)
+++ community-staging-x86_64/PKGBUILD	2017-02-25 15:45:45 UTC (rev 213791)
@@ -0,0 +1,47 @@
+# Maintainer: Lukas Fleischer <lfleischer at archlinux.org>
+# Contributor: Daniel Micay <danielmicay at gmail.com>
+# Contributor: simo <simo at archlinux.org>
+# Contributor: Sid Karunaratne
+
+pkgname=tor
+pkgver=0.2.9.9
+pkgrel=2
+pkgdesc='Anonymizing overlay network.'
+arch=('i686' 'x86_64')
+url='http://www.torproject.org/'
+license=('BSD')
+depends=('openssl' 'libevent' 'bash' 'libseccomp')
+optdepends=('torsocks: for torify')
+makedepends=('ca-certificates')
+backup=('etc/tor/torrc'
+        'etc/tor/torrc-dist')
+install='tor.install'
+source=("https://www.torproject.org/dist/${pkgname}-${pkgver}.tar.gz"{,.asc}
+        'torrc'
+        'tor.service')
+md5sums=('d9d8a2d1f65c151eb2b448f6a93fc326'
+         'SKIP'
+         'c1dd4004c63edaeaa829e01be5413cfc'
+         '503cedd9679f9817b2c27916ba989a74')
+validpgpkeys=('2133BC600AB133E1D826D173FE43009C4607B1FB') # Nick Mathewson
+
+build() {
+  cd "${srcdir}/${pkgname}-${pkgver}"
+
+  ./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var
+  make
+}
+
+package() {
+  cd "${srcdir}/${pkgname}-${pkgver}"
+
+  make DESTDIR="${pkgdir}" install
+
+  install -dm0700 -o 43 -g 43 "${pkgdir}/var/lib/tor"
+
+  mv "${pkgdir}/etc/tor/torrc.sample" "${pkgdir}/etc/tor/torrc-dist"
+  install -Dm0644 "${srcdir}/torrc" "${pkgdir}/etc/tor/torrc"
+  install -Dm0644 "${srcdir}/tor.service" "${pkgdir}/usr/lib/systemd/system/tor.service"
+
+  install -Dm0644 LICENSE "${pkgdir}/usr/share/licenses/${pkgname}/LICENSE"
+}

Copied: tor/repos/community-staging-x86_64/tor.install (from rev 213790, tor/trunk/tor.install)
===================================================================
--- community-staging-x86_64/tor.install	                        (rev 0)
+++ community-staging-x86_64/tor.install	2017-02-25 15:45:45 UTC (rev 213791)
@@ -0,0 +1,4 @@
+post_install() {
+  groupadd -g 43 tor &>/dev/null
+  useradd -u 43 -g tor -d /var/lib/tor -s /bin/false tor &> /dev/null
+}

Copied: tor/repos/community-staging-x86_64/tor.service (from rev 213790, tor/trunk/tor.service)
===================================================================
--- community-staging-x86_64/tor.service	                        (rev 0)
+++ community-staging-x86_64/tor.service	2017-02-25 15:45:45 UTC (rev 213791)
@@ -0,0 +1,15 @@
+[Unit]
+Description=Anonymizing Overlay Network
+After=network.target
+
+[Service]
+User=tor
+Type=simple
+ExecStart=/usr/bin/tor -f /etc/tor/torrc
+ExecReload=/usr/bin/kill -HUP $MAINPID
+KillSignal=SIGINT
+LimitNOFILE=8192
+PrivateDevices=yes
+
+[Install]
+WantedBy=multi-user.target

Copied: tor/repos/community-staging-x86_64/torrc (from rev 213790, tor/trunk/torrc)
===================================================================
--- community-staging-x86_64/torrc	                        (rev 0)
+++ community-staging-x86_64/torrc	2017-02-25 15:45:45 UTC (rev 213791)
@@ -0,0 +1,189 @@
+## Configuration file for a typical Tor user
+## Last updated 22 April 2012 for Tor 0.2.3.14-alpha.
+## (may or may not work for much older or much newer versions of Tor.)
+##
+## Lines that begin with "## " try to explain what's going on. Lines
+## that begin with just "#" are disabled commands: you can enable them
+## by removing the "#" symbol.
+##
+## See 'man tor', or https://www.torproject.org/docs/tor-manual.html,
+## for more options you can use in this file.
+##
+## Tor will look for this file in various places based on your platform:
+## https://www.torproject.org/docs/faq#torrc
+
+## Tor opens a socks proxy on port 9050 by default -- even if you don't
+## configure one below. Set "SocksPort 0" if you plan to run Tor only
+## as a relay, and not make any local application connections yourself.
+#SocksPort 9050 # Default: Bind to localhost:9050 for local connections.
+#SocksPort 192.168.0.1:9100 # Bind to this adddress:port too.
+
+## Entry policies to allow/deny SOCKS requests based on IP address.
+## First entry that matches wins. If no SocksPolicy is set, we accept
+## all (and only) requests that reach a SocksPort. Untrusted users who
+## can access your SocksPort may be able to learn about the connections
+## you make.
+#SocksPolicy accept 192.168.0.0/16
+#SocksPolicy reject *
+
+## Logs go to stdout at level "notice" unless redirected by something
+## else, like one of the below lines. You can have as many Log lines as
+## you want.
+##
+## We advise using "notice" in most cases, since anything more verbose
+## may provide sensitive information to an attacker who obtains the logs.
+##
+## Send all messages of level 'notice' or higher to /var/log/tor/notices.log
+#Log notice file /var/log/tor/notices.log
+## Send every possible message to /var/log/tor/debug.log
+#Log debug file /var/log/tor/debug.log
+## Use the system log instead of Tor's logfiles
+Log notice syslog
+## To send all messages to stderr:
+#Log debug stderr
+
+## Uncomment this to start the process in the background... or use
+## --runasdaemon 1 on the command line. This is ignored on Windows;
+## see the FAQ entry if you want Tor to run as an NT service.
+#RunAsDaemon 1
+
+## The directory for keeping all the keys/etc. By default, we store
+## things in $HOME/.tor on Unix, and in Application Data\tor on Windows.
+DataDirectory /var/lib/tor
+
+## The port on which Tor will listen for local connections from Tor
+## controller applications, as documented in control-spec.txt.
+#ControlPort 9051
+## If you enable the controlport, be sure to enable one of these
+## authentication methods, to prevent attackers from accessing it.
+#HashedControlPassword 16:872860B76453A77D60CA2BB8C1A7042072093276A3D701AD684053EC4C
+#CookieAuthentication 1
+
+############### This section is just for location-hidden services ###
+
+## Once you have configured a hidden service, you can look at the
+## contents of the file ".../hidden_service/hostname" for the address
+## to tell people.
+##
+## HiddenServicePort x y:z says to redirect requests on port x to the
+## address y:z.
+
+#HiddenServiceDir /var/lib/tor/hidden_service/
+#HiddenServicePort 80 127.0.0.1:80
+
+#HiddenServiceDir /var/lib/tor/other_hidden_service/
+#HiddenServicePort 80 127.0.0.1:80
+#HiddenServicePort 22 127.0.0.1:22
+
+################ This section is just for relays #####################
+#
+## See https://www.torproject.org/docs/tor-doc-relay for details.
+
+## Required: what port to advertise for incoming Tor connections.
+#ORPort 9001
+## If you want to listen on a port other than the one advertised in
+## ORPort (e.g. to advertise 443 but bind to 9090), you can do it as
+## follows.  You'll need to do ipchains or other port forwarding
+## yourself to make this work.
+#ORPort 443 NoListen
+#ORPort 127.0.0.1:9090 NoAdvertise
+
+## The IP address or full DNS name for incoming connections to your
+## relay. Leave commented out and Tor will guess.
+#Address noname.example.com
+
+## If you have multiple network interfaces, you can specify one for
+## outgoing traffic to use.
+# OutboundBindAddress 10.0.0.5
+
+## A handle for your relay, so people don't have to refer to it by key.
+#Nickname ididnteditheconfig
+
+## Define these to limit how much relayed traffic you will allow. Your
+## own traffic is still unthrottled. Note that RelayBandwidthRate must
+## be at least 20 KB.
+## Note that units for these config options are bytes per second, not bits
+## per second, and that prefixes are binary prefixes, i.e. 2^10, 2^20, etc.
+#RelayBandwidthRate 100 KB  # Throttle traffic to 100KB/s (800Kbps)
+#RelayBandwidthBurst 200 KB # But allow bursts up to 200KB/s (1600Kbps)
+
+## Use these to restrict the maximum traffic per day, week, or month.
+## Note that this threshold applies separately to sent and received bytes,
+## not to their sum: setting "4 GB" may allow up to 8 GB total before
+## hibernating.
+##
+## Set a maximum of 4 gigabytes each way per period.
+#AccountingMax 4 GB
+## Each period starts daily at midnight (AccountingMax is per day)
+#AccountingStart day 00:00
+## Each period starts on the 3rd of the month at 15:00 (AccountingMax
+## is per month)
+#AccountingStart month 3 15:00
+
+## Contact info to be published in the directory, so we can contact you
+## if your relay is misconfigured or something else goes wrong. Google
+## indexes this, so spammers might also collect it.
+#ContactInfo Random Person <nobody AT example dot com>
+## You might also include your PGP or GPG fingerprint if you have one:
+#ContactInfo 0xFFFFFFFF Random Person <nobody AT example dot com>
+
+## Uncomment this to mirror directory information for others. Please do
+## if you have enough bandwidth.
+#DirPort 9030 # what port to advertise for directory connections
+## If you want to listen on a port other than the one advertised in
+## DirPort (e.g. to advertise 80 but bind to 9091), you can do it as
+## follows.  below too. You'll need to do ipchains or other port
+## forwarding yourself to make this work.
+#DirPort 80 NoListen
+#DirPort 127.0.0.1:9091 NoAdvertise
+## Uncomment to return an arbitrary blob of html on your DirPort. Now you
+## can explain what Tor is if anybody wonders why your IP address is
+## contacting them. See contrib/tor-exit-notice.html in Tor's source
+## distribution for a sample.
+#DirPortFrontPage /etc/tor/tor-exit-notice.html
+
+## Uncomment this if you run more than one Tor relay, and add the identity
+## key fingerprint of each Tor relay you control, even if they're on
+## different networks. You declare it here so Tor clients can avoid
+## using more than one of your relays in a single circuit. See
+## https://www.torproject.org/docs/faq#MultipleRelays
+## However, you should never include a bridge's fingerprint here, as it would
+## break its concealability and potentionally reveal its IP/TCP address.
+#MyFamily $keyid,$keyid,...
+
+## A comma-separated list of exit policies. They're considered first
+## to last, and the first match wins. If you want to _replace_
+## the default exit policy, end this with either a reject *:* or an
+## accept *:*. Otherwise, you're _augmenting_ (prepending to) the
+## default exit policy. Leave commented to just use the default, which is
+## described in the man page or at
+## https://www.torproject.org/documentation.html
+##
+## Look at https://www.torproject.org/faq-abuse.html#TypicalAbuses
+## for issues you might encounter if you use the default exit policy.
+##
+## If certain IPs and ports are blocked externally, e.g. by your firewall,
+## you should update your exit policy to reflect this -- otherwise Tor
+## users will be told that those destinations are down.
+##
+## For security, by default Tor rejects connections to private (local)
+## networks, including to your public IP address. See the man page entry
+## for ExitPolicyRejectPrivate if you want to allow "exit enclaving".
+##
+#ExitPolicy accept *:6660-6667,reject *:* # allow irc ports but no more
+#ExitPolicy accept *:119 # accept nntp as well as default exit policy
+#ExitPolicy reject *:* # no exits allowed
+
+## Bridge relays (or "bridges") are Tor relays that aren't listed in the
+## main directory. Since there is no complete public list of them, even an
+## ISP that filters connections to all the known Tor relays probably
+## won't be able to block all the bridges. Also, websites won't treat you
+## differently because they won't know you're running Tor. If you can
+## be a real relay, please do; but if not, be a bridge!
+#BridgeRelay 1
+## By default, Tor will advertise your bridge to users through various
+## mechanisms like https://bridges.torproject.org/. If you want to run
+## a private bridge, for example because you'll give out your bridge
+## address manually to your friends, uncomment this line:
+#PublishServerDescriptor 0
+



More information about the arch-commits mailing list