[arch-commits] Commit in sslh/trunk (15 files)
Sébastien Luttringer
seblu at archlinux.org
Thu Jun 15 00:54:28 UTC 2017
Date: Thursday, June 15, 2017 @ 00:54:27
Author: seblu
Revision: 236871
upgpkg: sslh 1.18-2
https://www.archlinux.org/todo/libconfig-16-rebuild/
Added:
sslh/trunk/next/
sslh/trunk/next/PKGBUILD
(from rev 236870, sslh/trunk/PKGBUILD)
sslh/trunk/next/sslh-fork.service
(from rev 236870, sslh/trunk/sslh-fork.service)
sslh/trunk/next/sslh-select.service
(from rev 236870, sslh/trunk/sslh-select.service)
sslh/trunk/next/sslh.cfg
(from rev 236870, sslh/trunk/sslh.cfg)
sslh/trunk/next/sslh.install
(from rev 236870, sslh/trunk/sslh.install)
sslh/trunk/sslh-fork.service
sslh/trunk/sslh-select.service
sslh/trunk/sslh.conf
sslh/trunk/sslh.install
Deleted:
sslh/trunk/PKGBUILD
sslh/trunk/sslh-fork.service
sslh/trunk/sslh-select.service
sslh/trunk/sslh.cfg
sslh/trunk/sslh.install
--------------------------+
PKGBUILD | 67 ------------------------------------------
next/PKGBUILD | 71 +++++++++++++++++++++++++++++++++++++++++++++
next/sslh-fork.service | 12 +++++++
next/sslh-select.service | 11 ++++++
next/sslh.cfg | 29 ++++++++++++++++++
next/sslh.install | 24 +++++++++++++++
sslh-fork.service | 23 ++++++--------
sslh-select.service | 21 ++++++-------
sslh.cfg | 29 ------------------
sslh.conf | 29 ++++++++++++++++++
sslh.install | 43 +++++++++++----------------
11 files changed, 215 insertions(+), 144 deletions(-)
Deleted: PKGBUILD
===================================================================
--- PKGBUILD 2017-06-14 20:14:09 UTC (rev 236870)
+++ PKGBUILD 2017-06-15 00:54:27 UTC (rev 236871)
@@ -1,67 +0,0 @@
-# $Id$
-# Maintainer: Sébastien "Seblu" Luttringer <seblu at archlinux.org>
-# Contributor: Le_suisse <lesuisse.dev+aur at gmail dot com>
-# Contributor: Jason Rodriguez <jason-aur at catloaf.net>
-
-pkgname=sslh
-pkgver=1.18
-pkgrel=1.2
-pkgdesc='SSL/SSH/OpenVPN/XMPP/tinc port multiplexer'
-arch=('i686' 'x86_64')
-url='http://www.rutschle.net/tech/sslh.shtml'
-license=('GPL2')
-makedepends=('systemd')
-depends=('libcap' 'libconfig' 'libsystemd')
-backup=('etc/sslh.cfg')
-install=$pkgname.install
-source=("http://www.rutschle.net/tech/sslh/$pkgname-v$pkgver.tar.gz"{,.asc}
- 'sslh.cfg'
- 'sslh.sysusers'
- 'sslh.service'
- 'sslh-select.service'
- 'sslh-fork.service')
-validpgpkeys=('CDDDBADBEA4B72748E007D326C056F7AC7934136') # Yves Rutschle <yves at rutschle.net>
-md5sums=('0e3568d5d234516c634d4df156473298'
- 'SKIP'
- 'd5405c7ca7e1813e4d49a473e5834640'
- 'f39544277a30595d4b7476b3f87ebbcf'
- 'e66490eacc9cb586e48e4e0562ac25e3'
- '7f95dc8ce4c8dfbe5cd0b1cabb8acb31'
- 'ea5733ec4c68709a813e84b4403e342a')
-
-build() {
- cd $pkgname-v$pkgver
- #FIXME: https://github.com/yrutschle/sslh/issues/103
- export CFLAGS=''
- make VERSION=\"v$pkgver\" USELIBCAP=1 USESYSTEMD=1 all systemd-sslh-generator
-}
-
-#check() {
-# cd $pkgname-v$pkgver
-# make test
-#}
-
-package() {
- # default arch config
- install -Dm 644 sslh.cfg "$pkgdir/etc/sslh.cfg"
- # manually install to have both ssl-fork and ssl-select
- cd $pkgname-v$pkgver
- install -Dm 755 sslh-fork "$pkgdir/usr/bin/sslh-fork"
- install -Dm 755 sslh-select "$pkgdir/usr/bin/sslh-select"
- ln -s sslh-fork "$pkgdir/usr/bin/sslh"
- # install manpage
- install -Dm 644 sslh.8.gz "$pkgdir/usr/share/man/man8/sslh.8.gz"
- ln -s sslh.8.gz "$pkgdir/usr/share/man/man8/sslh-fork.8.gz"
- ln -s sslh.8.gz "$pkgdir/usr/share/man/man8/sslh-select.8.gz"
- # install examples files
- install -Dm 644 basic.cfg "$pkgdir/usr/share/doc/$pkgname/basic.cfg"
- install -Dm 644 example.cfg "$pkgdir/usr/share/doc/$pkgname/example.cfg"
- # systemd
- install -dm 755 "$pkgdir"/usr/lib/{systemd/system,sysusers.d}
- install -Dm 755 systemd-sslh-generator "$pkgdir/usr/lib/systemd/system-generators/systemd-sslh-generator"
- cd "$pkgdir"
- install -Dm 644 "$srcdir"/sslh{,-fork,-select}.service usr/lib/systemd/system
- install -Dm 644 "$srcdir"/sslh.sysusers usr/lib/sysusers.d/sslh.conf
-}
-
-# vim:set ts=2 sw=2 et:
Copied: sslh/trunk/next/PKGBUILD (from rev 236870, sslh/trunk/PKGBUILD)
===================================================================
--- next/PKGBUILD (rev 0)
+++ next/PKGBUILD 2017-06-15 00:54:27 UTC (rev 236871)
@@ -0,0 +1,71 @@
+# $Id$
+# Maintainer: Sébastien "Seblu" Luttringer <seblu at archlinux.org>
+# Contributor: Le_suisse <lesuisse.dev+aur at gmail dot com>
+# Contributor: Jason Rodriguez <jason-aur at catloaf.net>
+
+pkgname=sslh
+pkgver=1.18
+pkgrel=1.2
+pkgdesc='SSL/SSH/OpenVPN/XMPP/tinc port multiplexer'
+arch=('i686' 'x86_64')
+url='http://www.rutschle.net/tech/sslh.shtml'
+license=('GPL2')
+makedepends=('systemd')
+depends=('libcap' 'libconfig' 'libsystemd')
+backup=('etc/sslh.cfg')
+install=$pkgname.install
+source=("http://www.rutschle.net/tech/sslh/$pkgname-v$pkgver.tar.gz"{,.asc}
+ 'sslh-master.zip'
+ 'sslh.cfg'
+ 'sslh.sysusers'
+ 'sslh.service'
+ 'sslh-select.service'
+ 'sslh-fork.service')
+validpgpkeys=('CDDDBADBEA4B72748E007D326C056F7AC7934136') # Yves Rutschle <yves at rutschle.net>
+md5sums=('0e3568d5d234516c634d4df156473298'
+ 'SKIP'
+ '5cfde7884d5c9d7a8b7b971b3f37e94b'
+ 'd5405c7ca7e1813e4d49a473e5834640'
+ 'f39544277a30595d4b7476b3f87ebbcf'
+ 'e66490eacc9cb586e48e4e0562ac25e3'
+ '7f95dc8ce4c8dfbe5cd0b1cabb8acb31'
+ 'ea5733ec4c68709a813e84b4403e342a')
+
+build() {
+ #cd $pkgname-v$pkgver
+ cd sslh-master
+ #FIXME: https://github.com/yrutschle/sslh/issues/103
+ export CFLAGS=''
+ make VERSION=\"v$pkgver\" USELIBCAP=1 USESYSTEMD=1 all systemd-sslh-generator
+}
+
+#check() {
+# cd $pkgname-v$pkgver
+# make test
+#}
+
+package() {
+ # default arch config
+ install -Dm 644 sslh.cfg "$pkgdir/etc/sslh.cfg"
+ # manually install to have both ssl-fork and ssl-select
+ #cd $pkgname-v$pkgver
+ cd sslh-master
+ install -Dm 755 sslh-fork "$pkgdir/usr/bin/sslh-fork"
+ install -Dm 755 sslh-select "$pkgdir/usr/bin/sslh-select"
+ ln -s sslh-fork "$pkgdir/usr/bin/sslh"
+ # install manpage
+ install -Dm 644 sslh.8.gz "$pkgdir/usr/share/man/man8/sslh.8.gz"
+ ln -s sslh.8.gz "$pkgdir/usr/share/man/man8/sslh-fork.8.gz"
+ ln -s sslh.8.gz "$pkgdir/usr/share/man/man8/sslh-select.8.gz"
+ # install examples files
+ install -Dm 644 basic.cfg "$pkgdir/usr/share/doc/$pkgname/basic.cfg"
+ install -Dm 644 example.cfg "$pkgdir/usr/share/doc/$pkgname/example.cfg"
+ # systemd
+ install -dm 755 "$pkgdir"/usr/lib/{systemd/system,sysusers.d}
+ install -Dm 755 systemd-sslh-generator "$pkgdir/usr/lib/systemd/system-generators/systemd-sslh-generator"
+ cd "$pkgdir"
+ install -Dm 644 "$srcdir"/sslh{,-fork,-select}.service usr/lib/systemd/system
+ install -Dm 644 "$srcdir"/sslh.sysusers usr/lib/sysusers.d/sslh.conf
+}
+
+# vim:set ts=2 sw=2 et:
Copied: sslh/trunk/next/sslh-fork.service (from rev 236870, sslh/trunk/sslh-fork.service)
===================================================================
--- next/sslh-fork.service (rev 0)
+++ next/sslh-fork.service 2017-06-15 00:54:27 UTC (rev 236871)
@@ -0,0 +1,12 @@
+[Unit]
+Description=SSL/SSH multiplexer (fork mode)
+Conflicts=sslh-select.service sslh.socket
+After=network.target
+
+[Service]
+ExecStart=/usr/bin/sslh-fork -F
+KillMode=process
+PIDFile=/run/sslh.pid
+
+[Install]
+WantedBy=multi-user.target
Copied: sslh/trunk/next/sslh-select.service (from rev 236870, sslh/trunk/sslh-select.service)
===================================================================
--- next/sslh-select.service (rev 0)
+++ next/sslh-select.service 2017-06-15 00:54:27 UTC (rev 236871)
@@ -0,0 +1,11 @@
+[Unit]
+Description=SSL/SSH multiplexer (select mode)
+Conflicts=sslh-fork.service sslh.socket
+After=network.target
+
+[Service]
+ExecStart=/usr/bin/sslh-select -F
+PIDFile=/run/sslh.pid
+
+[Install]
+WantedBy=multi-user.target
Copied: sslh/trunk/next/sslh.cfg (from rev 236870, sslh/trunk/sslh.cfg)
===================================================================
--- next/sslh.cfg (rev 0)
+++ next/sslh.cfg 2017-06-15 00:54:27 UTC (rev 236871)
@@ -0,0 +1,29 @@
+# Default Arch configuration
+# You can find more examples in /usr/share/doc/sslh
+
+verbose: false;
+foreground: true;
+inetd: false;
+numeric: false;
+transparent: false;
+timeout: 2;
+user: "sslh";
+pidfile: "/run/sslh.pid";
+
+
+listen:
+(
+ { host: "::0"; port: "443"; }
+);
+
+protocols:
+(
+ { name: "ssh"; service: "ssh"; host: "localhost"; port: "22"; probe: "builtin"; },
+ { name: "openvpn"; host: "localhost"; port: "1194"; probe: "builtin"; },
+ { name: "xmpp"; host: "localhost"; port: "5222"; probe: "builtin"; },
+ { name: "http"; host: "localhost"; port: "80"; probe: "builtin"; },
+ { name: "ssl"; host: "localhost"; port: "8443"; probe: "builtin"; },
+ { name: "anyprot"; host: "localhost"; port: "8443"; probe: "builtin"; }
+);
+
+# vim:set ts=4 sw=4 et:
Copied: sslh/trunk/next/sslh.install (from rev 236870, sslh/trunk/sslh.install)
===================================================================
--- next/sslh.install (rev 0)
+++ next/sslh.install 2017-06-15 00:54:27 UTC (rev 236871)
@@ -0,0 +1,24 @@
+#!/bin/sh
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_upgrade() {
+ if (( "$(vercmp $2 1.14-1)" <= 0 )); then
+ cat << EOF
+===> sslh systemd service has been splitted in sslh-fork.service and sslh-select.service
+EOF
+ fi
+ if (( "$(vercmp $2 1.16-3)" < 0 )); then
+ cat << EOF
+===> sslh may runs as unprivileged sslh user. Check your setup.
+EOF
+ fi
+ if (( "$(vercmp $2 1.18-2)" < 0 )); then
+ cat << EOF
+===> Default config path is now /etc/sslh.cfg (as required by systemd generator)
+===> Rename your /etc/sslh.conf into /etc/sslh.cfg
+EOF
+ fi
+}
+
+# vim:set ts=2 sw=2 ft=sh et:
Deleted: sslh-fork.service
===================================================================
--- sslh-fork.service 2017-06-14 20:14:09 UTC (rev 236870)
+++ sslh-fork.service 2017-06-15 00:54:27 UTC (rev 236871)
@@ -1,12 +0,0 @@
-[Unit]
-Description=SSL/SSH multiplexer (fork mode)
-Conflicts=sslh-select.service sslh.socket
-After=network.target
-
-[Service]
-ExecStart=/usr/bin/sslh-fork -F
-KillMode=process
-PIDFile=/run/sslh.pid
-
-[Install]
-WantedBy=multi-user.target
Added: sslh-fork.service
===================================================================
--- sslh-fork.service (rev 0)
+++ sslh-fork.service 2017-06-15 00:54:27 UTC (rev 236871)
@@ -0,0 +1,11 @@
+[Unit]
+Description=SSL/SSH multiplexer
+After=network.target
+
+[Service]
+ExecStart=/usr/bin/sslh-fork -F/etc/sslh.conf
+KillMode=process
+PIDFile=/run/sslh.pid
+
+[Install]
+WantedBy=multi-user.target
Deleted: sslh-select.service
===================================================================
--- sslh-select.service 2017-06-14 20:14:09 UTC (rev 236870)
+++ sslh-select.service 2017-06-15 00:54:27 UTC (rev 236871)
@@ -1,11 +0,0 @@
-[Unit]
-Description=SSL/SSH multiplexer (select mode)
-Conflicts=sslh-fork.service sslh.socket
-After=network.target
-
-[Service]
-ExecStart=/usr/bin/sslh-select -F
-PIDFile=/run/sslh.pid
-
-[Install]
-WantedBy=multi-user.target
Added: sslh-select.service
===================================================================
--- sslh-select.service (rev 0)
+++ sslh-select.service 2017-06-15 00:54:27 UTC (rev 236871)
@@ -0,0 +1,10 @@
+[Unit]
+Description=SSL/SSH multiplexer
+After=network.target
+
+[Service]
+ExecStart=/usr/bin/sslh-select -F/etc/sslh.conf
+PIDFile=/run/sslh.pid
+
+[Install]
+WantedBy=multi-user.target
Deleted: sslh.cfg
===================================================================
--- sslh.cfg 2017-06-14 20:14:09 UTC (rev 236870)
+++ sslh.cfg 2017-06-15 00:54:27 UTC (rev 236871)
@@ -1,29 +0,0 @@
-# Default Arch configuration
-# You can find more examples in /usr/share/doc/sslh
-
-verbose: false;
-foreground: true;
-inetd: false;
-numeric: false;
-transparent: false;
-timeout: 2;
-user: "sslh";
-pidfile: "/run/sslh.pid";
-
-
-listen:
-(
- { host: "::0"; port: "443"; }
-);
-
-protocols:
-(
- { name: "ssh"; service: "ssh"; host: "localhost"; port: "22"; probe: "builtin"; },
- { name: "openvpn"; host: "localhost"; port: "1194"; probe: "builtin"; },
- { name: "xmpp"; host: "localhost"; port: "5222"; probe: "builtin"; },
- { name: "http"; host: "localhost"; port: "80"; probe: "builtin"; },
- { name: "ssl"; host: "localhost"; port: "8443"; probe: "builtin"; },
- { name: "anyprot"; host: "localhost"; port: "8443"; probe: "builtin"; }
-);
-
-# vim:set ts=4 sw=4 et:
Added: sslh.conf
===================================================================
--- sslh.conf (rev 0)
+++ sslh.conf 2017-06-15 00:54:27 UTC (rev 236871)
@@ -0,0 +1,29 @@
+# Default Arch configuration
+# You can find more examples in /usr/share/doc/sslh
+
+verbose: false;
+foreground: true;
+inetd: false;
+numeric: false;
+transparent: false;
+timeout: 2;
+user: "sslh";
+pidfile: "/run/sslh.pid";
+
+
+listen:
+(
+ { host: "::0"; port: "443"; }
+);
+
+protocols:
+(
+ { name: "ssh"; service: "ssh"; host: "localhost"; port: "22"; probe: "builtin"; },
+ { name: "openvpn"; host: "localhost"; port: "1194"; probe: "builtin"; },
+ { name: "xmpp"; host: "localhost"; port: "5222"; probe: "builtin"; },
+ { name: "http"; host: "localhost"; port: "80"; probe: "builtin"; },
+ { name: "ssl"; host: "localhost"; port: "8443"; probe: "builtin"; },
+ { name: "anyprot"; host: "localhost"; port: "8443"; probe: "builtin"; }
+);
+
+# vim:set ts=4 sw=4 et:
Deleted: sslh.install
===================================================================
--- sslh.install 2017-06-14 20:14:09 UTC (rev 236870)
+++ sslh.install 2017-06-15 00:54:27 UTC (rev 236871)
@@ -1,25 +0,0 @@
-#!/bin/sh
-
-# arg 1: the new package version
-# arg 2: the old package version
-post_upgrade() {
- if (( "$(vercmp $2 1.14-1)" <= 0 )); then
- cat << EOF
-===> sslh systemd service has been splitted in sslh-fork.service and sslh-select.service
-EOF
- fi
- if (( "$(vercmp $2 1.16-3)" < 0 )); then
- post_install "$1"
- cat << EOF
-===> sslh may runs as unprivileged sslh user. Check your setup.
-EOF
- fi
- if (( "$(vercmp $2 1.18-2)" < 0 )); then
- cat << EOF
-===> Default config path is now /etc/sslh.cfg (as required by systemd generator)
-===> Rename your /etc/sslh.conf into /etc/sslh.cfg
-EOF
- fi
-}
-
-# vim:set ts=2 sw=2 ft=sh et:
Added: sslh.install
===================================================================
--- sslh.install (rev 0)
+++ sslh.install 2017-06-15 00:54:27 UTC (rev 236871)
@@ -0,0 +1,18 @@
+#!/bin/sh
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_upgrade() {
+ if (( "$(vercmp $2 1.14-1)" <= 0 )); then
+ cat << EOF
+===> sslh systemd service has been splitted in sslh-fork.service and sslh-select.service
+EOF
+ fi
+ if (( "$(vercmp $2 1.16-3)" < 0 )); then
+ cat << EOF
+===> sslh may runs as unprivileged sslh user. Check your setup.
+EOF
+ fi
+}
+
+# vim:set ts=2 sw=2 ft=sh et:
More information about the arch-commits
mailing list