[arch-commits] Commit in xorg-server/repos (7 files)
Laurent Carlier
lcarlier at archlinux.org
Fri Jan 26 10:35:09 UTC 2018
Date: Friday, January 26, 2018 @ 10:35:06
Author: lcarlier
Revision: 315464
archrelease: copy trunk to testing-x86_64
Added:
xorg-server/repos/testing-x86_64/
xorg-server/repos/testing-x86_64/PKGBUILD
(from rev 315463, xorg-server/trunk/PKGBUILD)
xorg-server/repos/testing-x86_64/nvidia-add-modulepath-support.patch
(from rev 315463, xorg-server/trunk/nvidia-add-modulepath-support.patch)
xorg-server/repos/testing-x86_64/xorg-server.install
(from rev 315463, xorg-server/trunk/xorg-server.install)
xorg-server/repos/testing-x86_64/xserver-autobind-hotplug.patch
(from rev 315463, xorg-server/trunk/xserver-autobind-hotplug.patch)
xorg-server/repos/testing-x86_64/xvfb-run
(from rev 315463, xorg-server/trunk/xvfb-run)
xorg-server/repos/testing-x86_64/xvfb-run.1
(from rev 315463, xorg-server/trunk/xvfb-run.1)
-------------------------------------+
PKGBUILD | 248 +++++++++
nvidia-add-modulepath-support.patch | 851 ++++++++++++++++++++++++++++++++++
xorg-server.install | 18
xserver-autobind-hotplug.patch | 302 ++++++++++++
xvfb-run | 180 +++++++
xvfb-run.1 | 282 +++++++++++
6 files changed, 1881 insertions(+)
Copied: xorg-server/repos/testing-x86_64/PKGBUILD (from rev 315463, xorg-server/trunk/PKGBUILD)
===================================================================
--- testing-x86_64/PKGBUILD (rev 0)
+++ testing-x86_64/PKGBUILD 2018-01-26 10:35:06 UTC (rev 315464)
@@ -0,0 +1,248 @@
+# $Id$
+# Maintainer: AndyRTR <andyrtr at archlinux.org>
+# Maintainer: Jan de Groot <jgc at archlinux.org>
+
+pkgbase=xorg-server
+pkgname=('xorg-server' 'xorg-server-xephyr' 'xorg-server-xdmx' 'xorg-server-xvfb' 'xorg-server-xnest' 'xorg-server-xwayland' 'xorg-server-common' 'xorg-server-devel')
+pkgver=1.19.6+13+gd0d1a694f
+pkgrel=1
+arch=('x86_64')
+license=('custom')
+groups=('xorg')
+url="http://xorg.freedesktop.org"
+makedepends=('pixman' 'libx11' 'mesa' 'mesa-libgl' 'xf86driproto' 'xcmiscproto' 'xtrans' 'bigreqsproto' 'randrproto'
+ 'inputproto' 'fontsproto' 'videoproto' 'presentproto' 'compositeproto' 'recordproto' 'scrnsaverproto'
+ 'resourceproto' 'xineramaproto' 'libxkbfile' 'libxfont2' 'renderproto' 'libpciaccess' 'libxv'
+ 'xf86dgaproto' 'libxmu' 'libxrender' 'libxi' 'dmxproto' 'libxaw' 'libdmx' 'libxtst' 'libxres'
+ 'xorg-xkbcomp' 'xorg-util-macros' 'xorg-font-util' 'glproto' 'dri2proto' 'libgcrypt' 'libepoxy'
+ 'xcb-util' 'xcb-util-image' 'xcb-util-renderutil' 'xcb-util-wm' 'xcb-util-keysyms' 'dri3proto'
+ 'libxshmfence' 'libunwind' 'systemd' 'wayland-protocols' 'git')
+_commit=d0d1a694f967af770fba0d36043fd5218ff20984 # branch 1.19
+#source=(https://xorg.freedesktop.org/releases/individual/xserver/${pkgbase}-${pkgver}.tar.bz2{,.sig}
+source=("git+https://anongit.freedesktop.org/git/xorg/xserver.git#commit=$_commit"
+ nvidia-add-modulepath-support.patch
+ xserver-autobind-hotplug.patch
+ xvfb-run
+ xvfb-run.1)
+validpgpkeys=('7B27A3F1A6E18CD9588B4AE8310180050905E40C'
+ 'C383B778255613DFDB409D91DB221A6900000011'
+ 'DD38563A8A8224537D1F90E45B8A2D50A0ECD0D3'
+ '995ED5C8A6138EB0961F18474C09DD83CAAA50B2')
+sha256sums=('SKIP'
+ '914a8d775b708f836ae3f0eeca553da3872727a2e4262190f4d5c01241cb14e8'
+ 'fcaf536e4fc307958923b58f2baf3d3102ad694efc28506f6f95a9e64483fa57'
+ 'ff0156309470fc1d378fd2e104338020a884295e285972cc88e250e031cc35b9'
+ '2460adccd3362fefd4cdc5f1c70f332d7b578091fb9167bf88b5f91265bbd776')
+
+pkgver() {
+ cd xserver
+ git describe --tags | sed 's/^xorg-server-//;s/_/./g;s/-/+/g'
+}
+
+prepare() {
+ cd xserver
+ #cd "${pkgbase}-${pkgver}"
+
+ # merged upstream in trunk
+ patch -Np1 -i ../nvidia-add-modulepath-support.patch
+ # patch from Fedora, not yet merged
+ patch -Np1 -i ../xserver-autobind-hotplug.patch
+
+ autoreconf -vfi
+}
+
+build() {
+ # Since pacman 5.0.2-2, hardened flags are now enabled in makepkg.conf
+ # With them, module fail to load with undefined symbol.
+ # See https://bugs.archlinux.org/task/55102 / https://bugs.archlinux.org/task/54845
+ export CFLAGS=${CFLAGS/-fno-plt}
+ export CXXFLAGS=${CXXFLAGS/-fno-plt}
+ export LDFLAGS=${LDFLAGS/,-z,now}
+
+ cd xserver
+ #cd "${pkgbase}-${pkgver}"
+ ./configure --prefix=/usr \
+ --enable-ipv6 \
+ --enable-dri \
+ --enable-dmx \
+ --enable-xvfb \
+ --enable-xnest \
+ --enable-composite \
+ --enable-xcsecurity \
+ --enable-libunwind \
+ --enable-xorg \
+ --enable-xephyr \
+ --enable-glamor \
+ --enable-xwayland \
+ --enable-kdrive \
+ --enable-kdrive-kbd \
+ --enable-kdrive-mouse \
+ --enable-config-udev \
+ --enable-systemd-logind \
+ --enable-suid-wrapper \
+ --disable-install-setuid \
+ --enable-record \
+ --disable-xfbdev \
+ --disable-xfake \
+ --disable-static \
+ --libexecdir=/usr/lib/xorg-server \
+ --sysconfdir=/etc \
+ --localstatedir=/var \
+ --with-xkb-path=/usr/share/X11/xkb \
+ --with-xkb-output=/var/lib/xkb \
+ --with-fontrootdir=/usr/share/fonts \
+ --with-sha1=libgcrypt
+
+# --without-dtrace \
+# --disable-linux-acpi --disable-linux-apm \
+
+ make
+
+ # Disable subdirs for make install rule to make splitting easier
+ sed -e 's/^DMX_SUBDIRS =.*/DMX_SUBDIRS =/' \
+ -e 's/^XVFB_SUBDIRS =.*/XVFB_SUBDIRS =/' \
+ -e 's/^XNEST_SUBDIRS =.*/XNEST_SUBDIRS = /' \
+ -e 's/^KDRIVE_SUBDIRS =.*/KDRIVE_SUBDIRS =/' \
+ -e 's/^XWAYLAND_SUBDIRS =.*/XWAYLAND_SUBDIRS =/' \
+ -i hw/Makefile
+}
+
+package_xorg-server-common() {
+ pkgdesc="Xorg server common files"
+ depends=(xkeyboard-config xorg-xkbcomp xorg-setxkbmap)
+
+ cd xserver
+ #cd "${pkgbase}-${pkgver}"
+ install -m755 -d "${pkgdir}/usr/share/licenses/xorg-server-common"
+ install -m644 COPYING "${pkgdir}/usr/share/licenses/xorg-server-common"
+
+ make -C xkb DESTDIR="${pkgdir}" install-data
+
+ install -m755 -d "${pkgdir}/usr/share/man/man1"
+ install -m644 man/Xserver.1 "${pkgdir}/usr/share/man/man1/"
+
+ install -m755 -d "${pkgdir}/usr/lib/xorg"
+ install -m644 dix/protocol.txt "${pkgdir}/usr/lib/xorg/"
+}
+
+package_xorg-server() {
+ pkgdesc="Xorg X server"
+ depends=(libepoxy libxfont2 pixman xorg-server-common libunwind dbus libgl xf86-input-libinput
+ libpciaccess libdrm libxshmfence) # FS#52949
+
+ # see xorg-server-*/hw/xfree86/common/xf86Module.h for ABI versions - we provide major numbers that drivers can depend on
+ # and /usr/lib/pkgconfig/xorg-server.pc in xorg-server-devel pkg
+ provides=('X-ABI-VIDEODRV_VERSION=23' 'X-ABI-XINPUT_VERSION=24.1' 'X-ABI-EXTENSION_VERSION=10.0' 'x-server')
+ conflicts=('nvidia-utils<=331.20' 'glamor-egl' 'xf86-video-modesetting')
+ replaces=('glamor-egl' 'xf86-video-modesetting')
+ install=xorg-server.install
+
+ cd xserver
+ #cd "${pkgbase}-${pkgver}"
+ make DESTDIR="${pkgdir}" install
+
+ # distro specific files must be installed in /usr/share/X11/xorg.conf.d
+ install -m755 -d "${pkgdir}/etc/X11/xorg.conf.d"
+
+ rm -rf "${pkgdir}/var"
+
+ rm -f "${pkgdir}/usr/share/man/man1/Xserver.1"
+ rm -f "${pkgdir}/usr/lib/xorg/protocol.txt"
+
+ install -m755 -d "${pkgdir}/usr/share/licenses/xorg-server"
+ ln -sf ../xorg-server-common/COPYING "${pkgdir}/usr/share/licenses/xorg-server/COPYING"
+
+ rm -rf "${pkgdir}/usr/lib/pkgconfig"
+ rm -rf "${pkgdir}/usr/include"
+ rm -rf "${pkgdir}/usr/share/aclocal"
+}
+
+package_xorg-server-xephyr() {
+ pkgdesc="A nested X server that runs as an X application"
+ depends=(libxfont2 libgl libepoxy libunwind libsystemd libxv pixman xorg-server-common xcb-util-image
+ xcb-util-renderutil xcb-util-wm xcb-util-keysyms)
+
+ cd xserver/hw/kdrive
+ #cd "${pkgbase}-${pkgver}/hw/kdrive"
+ make DESTDIR="${pkgdir}" install
+
+ install -m755 -d "${pkgdir}/usr/share/licenses/xorg-server-xephyr"
+ ln -sf ../xorg-server-common/COPYING "${pkgdir}/usr/share/licenses/xorg-server-xephyr/COPYING"
+}
+
+package_xorg-server-xvfb() {
+ pkgdesc="Virtual framebuffer X server"
+ depends=(libxfont2 libunwind libsystemd pixman xorg-server-common xorg-xauth libgl)
+
+ cd xserver/hw/vfb
+ #cd "${pkgbase}-${pkgver}/hw/vfb"
+ make DESTDIR="${pkgdir}" install
+
+ install -m755 "${srcdir}/xvfb-run" "${pkgdir}/usr/bin/"
+ install -m644 "${srcdir}/xvfb-run.1" "${pkgdir}/usr/share/man/man1/"
+
+ install -m755 -d "${pkgdir}/usr/share/licenses/xorg-server-xvfb"
+ ln -sf ../xorg-server-common/COPYING "${pkgdir}/usr/share/licenses/xorg-server-xvfb/COPYING"
+}
+
+package_xorg-server-xnest() {
+ pkgdesc="A nested X server that runs as an X application"
+ depends=(libxfont2 libxext libunwind pixman xorg-server-common libsystemd)
+
+ cd xserver/hw/xnest
+ #cd "${pkgbase}-${pkgver}/hw/xnest"
+ make DESTDIR="${pkgdir}" install
+
+ install -m755 -d "${pkgdir}/usr/share/licenses/xorg-server-xnest"
+ ln -sf ../xorg-server-common/COPYING "${pkgdir}/usr/share/licenses/xorg-server-xnest/COPYING"
+}
+
+package_xorg-server-xdmx() {
+ pkgdesc="Distributed Multihead X Server and utilities"
+ depends=(libxfont2 libxi libxaw libxrender libdmx libxfixes libunwind pixman xorg-server-common)
+
+ cd xserver/hw/dmx
+ #cd "${pkgbase}-${pkgver}/hw/dmx"
+ make DESTDIR="${pkgdir}" install
+
+ install -m755 -d "${pkgdir}/usr/share/licenses/xorg-server-xdmx"
+ ln -sf ../xorg-server-common/COPYING "${pkgdir}/usr/share/licenses/xorg-server-xdmx/COPYING"
+}
+
+package_xorg-server-xwayland() {
+ pkgdesc="run X clients under wayland"
+ depends=(libxfont2 libepoxy libunwind libsystemd libgl pixman xorg-server-common)
+
+ cd xserver/hw/xwayland
+ #cd "${pkgbase}-${pkgver}/hw/xwayland"
+ make DESTDIR="${pkgdir}" install
+
+ install -m755 -d "${pkgdir}/usr/share/licenses/xorg-server-xwayland"
+ ln -sf ../xorg-server-common/COPYING "${pkgdir}/usr/share/licenses/xorg-server-xwayland/COPYING"
+}
+
+package_xorg-server-devel() {
+ pkgdesc="Development files for the X.Org X server"
+ depends=(# see pkgdir/usr/lib/pkgconfig/xorg-server.pc
+ xproto randrproto renderproto xextproto inputproto kbproto
+ fontsproto pixman videoproto xf86driproto glproto
+ mesa dri2proto dri3proto xineramaproto libpciaccess
+ resourceproto scrnsaverproto presentproto
+ # not technically required but almost every Xorg pkg needs it to build
+ xorg-util-macros)
+
+ cd xserver
+ #cd "${pkgbase}-${pkgver}"
+ make DESTDIR="${pkgdir}" install
+
+ rm -rf "${pkgdir}/usr/bin"
+ rm -rf "${pkgdir}/usr/share/man"
+ rm -rf "${pkgdir}/usr/share/doc"
+ rm -rf "${pkgdir}/usr/share/X11"
+ rm -rf "${pkgdir}/usr/lib/xorg"
+ rm -rf "${pkgdir}/usr/lib/xorg-server"
+ rm -rf "${pkgdir}/var"
+
+ install -m755 -d "${pkgdir}/usr/share/licenses/xorg-server-devel"
+ ln -sf ../xorg-server-common/COPYING "${pkgdir}/usr/share/licenses/xorg-server-devel/COPYING"
+}
Copied: xorg-server/repos/testing-x86_64/nvidia-add-modulepath-support.patch (from rev 315463, xorg-server/trunk/nvidia-add-modulepath-support.patch)
===================================================================
--- testing-x86_64/nvidia-add-modulepath-support.patch (rev 0)
+++ testing-x86_64/nvidia-add-modulepath-support.patch 2018-01-26 10:35:06 UTC (rev 315464)
@@ -0,0 +1,851 @@
+From c17e544b271ced65483692103d39ed1188d4ca25 Mon Sep 17 00:00:00 2001
+From: Hans de Goede <hdegoede at redhat.com>
+Date: Tue, 27 Sep 2016 14:30:10 +0200
+Subject: [PATCH xserver v2 5/7] xfree86: Remove redundant ServerIsNotSeat0
+ check from xf86CallDriverProbe
+
+If foundScreen is TRUE, then all the code below the removed if
+will not execute until we reach the return foundScreen; at the
+end, so this entire if block is redundant.
+
+Signed-off-by: Hans de Goede <hdegoede at redhat.com>
+---
+ hw/xfree86/common/xf86Bus.c | 2 --
+ 1 file changed, 2 deletions(-)
+
+diff --git a/hw/xfree86/common/xf86Bus.c b/hw/xfree86/common/xf86Bus.c
+index 5b93940..27c6b1b 100644
+--- a/hw/xfree86/common/xf86Bus.c
++++ b/hw/xfree86/common/xf86Bus.c
+@@ -82,8 +82,6 @@ xf86CallDriverProbe(DriverPtr drv, Bool detect_only)
+ if (!xf86DoConfigure && drv->platformProbe != NULL) {
+ foundScreen = xf86platformProbeDev(drv);
+ }
+- if (ServerIsNotSeat0() && foundScreen)
+- return foundScreen;
+ #endif
+
+ #ifdef XSERVER_LIBPCIACCESS
+--
+2.9.3
+
+From 74bc0fff3a6ca233e56b3fb2971bca97b5a4f8b5 Mon Sep 17 00:00:00 2001
+From: Hans de Goede <hdegoede at redhat.com>
+Date: Fri, 30 Sep 2016 11:59:04 +0200
+Subject: [PATCH xserver v2 6/7] xfree86: Make adding unclaimed devices as GPU
+ devices a separate step
+
+This is primarily a preparation patch for fixing the xserver exiting with
+a "no screens found" error even though there are supported video cards,
+due to the server not recognizing any card as the primary card.
+
+This also fixes the (mostly theoretical) case of a platformBus capable
+driver adding a device as GPUscreen before a driver which only supports
+the old PCI probe method gets a chance to claim it as a normal screen.
+
+Signed-off-by: Hans de Goede <hdegoede at redhat.com>
+---
+ hw/xfree86/common/xf86Bus.c | 4 ++++
+ hw/xfree86/common/xf86platformBus.c | 15 +++++++++++++++
+ hw/xfree86/common/xf86platformBus.h | 6 ++++++
+ 3 files changed, 25 insertions(+)
+
+diff --git a/hw/xfree86/common/xf86Bus.c b/hw/xfree86/common/xf86Bus.c
+index 27c6b1b..a3a9898 100644
+--- a/hw/xfree86/common/xf86Bus.c
++++ b/hw/xfree86/common/xf86Bus.c
+@@ -125,6 +125,10 @@ xf86BusConfig(void)
+ xf86CallDriverProbe(xf86DriverList[i], FALSE);
+ }
+
++ for (i = 0; i < xf86NumDrivers; i++) {
++ xf86platformAddGPUDevices(xf86DriverList[i]);
++ }
++
+ /* If nothing was detected, return now */
+ if (xf86NumScreens == 0) {
+ xf86Msg(X_ERROR, "No devices detected.\n");
+diff --git a/hw/xfree86/common/xf86platformBus.c b/hw/xfree86/common/xf86platformBus.c
+index 39fb1dd..8dd0d5d 100644
+--- a/hw/xfree86/common/xf86platformBus.c
++++ b/hw/xfree86/common/xf86platformBus.c
+@@ -475,6 +475,21 @@ xf86platformProbeDev(DriverPtr drvp)
+ isGPUDevice(devList[i]) ? PLATFORM_PROBE_GPU_SCREEN : 0);
+ }
+
++ return foundScreen;
++}
++
++int
++xf86platformAddGPUDevices(DriverPtr drvp)
++{
++ Bool foundScreen = FALSE;
++ GDevPtr *devList;
++ int j;
++
++ if (!drvp->platformProbe)
++ return FALSE;
++
++ xf86MatchDevice(drvp->driverName, &devList);
++
+ /* if autoaddgpu devices is enabled then go find any unclaimed platform
+ * devices and add them as GPU screens */
+ if (xf86Info.autoAddGPU) {
+diff --git a/hw/xfree86/common/xf86platformBus.h b/hw/xfree86/common/xf86platformBus.h
+index a7335b9..0f5c0ef 100644
+--- a/hw/xfree86/common/xf86platformBus.h
++++ b/hw/xfree86/common/xf86platformBus.h
+@@ -41,6 +41,7 @@ struct xf86_platform_device {
+ #ifdef XSERVER_PLATFORM_BUS
+ int xf86platformProbe(void);
+ int xf86platformProbeDev(DriverPtr drvp);
++int xf86platformAddGPUDevices(DriverPtr drvp);
+
+ extern int xf86_num_platform_devices;
+ extern struct xf86_platform_device *xf86_platform_devices;
+@@ -156,6 +157,11 @@ xf86PlatformMatchDriver(char *matches[], int nmatches);
+
+ extern void xf86platformVTProbe(void);
+ extern void xf86platformPrimary(void);
++
++#else
++
++static inline int xf86platformAddGPUDevices(DriverPtr drvp) { return FALSE; }
++
+ #endif
+
+ #endif
+--
+2.9.3
+
+From 02bcb6f189c4ad8b2e73ce99cfa3c10f0c244a88 Mon Sep 17 00:00:00 2001
+From: Hans de Goede <hdegoede at redhat.com>
+Date: Fri, 30 Sep 2016 12:29:09 +0200
+Subject: [PATCH xserver v2 7/7] xfree86: Try harder to find atleast 1 non GPU
+ Screen
+
+If we did not find any non GPU Screens, try again ignoring the notion
+of any video devices being the primary device. This fixes Xorg exiting
+with a "no screens found" error when using virtio-vga in a
+virtual-machine and when using a device driven by simpledrm.
+
+This is a somewhat ugly solution, but it is the best I can come up with
+without major surgery to the bus and probe code.
+
+Signed-off-by: Hans de Goede <hdegoede at redhat.com>
+---
+ hw/xfree86/common/xf86.h | 1 +
+ hw/xfree86/common/xf86Bus.c | 26 +++++++++++++++++++++++---
+ hw/xfree86/common/xf86Globals.c | 1 +
+ hw/xfree86/common/xf86pciBus.c | 4 ++++
+ hw/xfree86/common/xf86platformBus.c | 4 ++++
+ 5 files changed, 33 insertions(+), 3 deletions(-)
+
+diff --git a/hw/xfree86/common/xf86.h b/hw/xfree86/common/xf86.h
+index e54c811..f724688 100644
+--- a/hw/xfree86/common/xf86.h
++++ b/hw/xfree86/common/xf86.h
+@@ -55,6 +55,7 @@
+ extern _X_EXPORT int xf86DoConfigure;
+ extern _X_EXPORT int xf86DoShowOptions;
+ extern _X_EXPORT Bool xf86DoConfigurePass1;
++extern _X_EXPORT Bool xf86ProbeIgnorePrimary;
+ extern _X_EXPORT Bool xorgHWAccess;
+
+ extern _X_EXPORT DevPrivateKeyRec xf86ScreenKeyRec;
+diff --git a/hw/xfree86/common/xf86Bus.c b/hw/xfree86/common/xf86Bus.c
+index a3a9898..9836803 100644
+--- a/hw/xfree86/common/xf86Bus.c
++++ b/hw/xfree86/common/xf86Bus.c
+@@ -117,14 +117,34 @@ xf86BusConfig(void)
+ int i, j;
+
+ /*
+- * Now call each of the Probe functions. Each successful probe will
+- * result in an extra entry added to the xf86Screens[] list for each
+- * instance of the hardware found.
++ * 3 step probe to (hopefully) ensure that we always find at least 1
++ * (non GPU) screen:
++ *
++ * 1. Call each drivers probe function normally,
++ * Each successful probe will result in an extra entry added to the
++ * xf86Screens[] list for each instance of the hardware found.
+ */
+ for (i = 0; i < xf86NumDrivers; i++) {
+ xf86CallDriverProbe(xf86DriverList[i], FALSE);
+ }
+
++ /*
++ * 2. If no Screens were found, call each drivers probe function with
++ * ignorePrimary = TRUE, to ensure that we do actually get a
++ * Screen if there is atleast one supported video card.
++ */
++ if (xf86NumScreens == 0) {
++ xf86ProbeIgnorePrimary = TRUE;
++ for (i = 0; i < xf86NumDrivers && xf86NumScreens == 0; i++) {
++ xf86CallDriverProbe(xf86DriverList[i], FALSE);
++ }
++ xf86ProbeIgnorePrimary = FALSE;
++ }
++
++ /*
++ * 3. Call xf86platformAddGPUDevices() to add any additional video cards as
++ * GPUScreens (GPUScreens are only supported by platformBus drivers).
++ */
+ for (i = 0; i < xf86NumDrivers; i++) {
+ xf86platformAddGPUDevices(xf86DriverList[i]);
+ }
+diff --git a/hw/xfree86/common/xf86Globals.c b/hw/xfree86/common/xf86Globals.c
+index 07cfabf..e962b75 100644
+--- a/hw/xfree86/common/xf86Globals.c
++++ b/hw/xfree86/common/xf86Globals.c
+@@ -152,6 +152,7 @@ XF86ConfigPtr xf86configptr = NULL;
+ Bool xf86Resetting = FALSE;
+ Bool xf86Initialising = FALSE;
+ Bool xf86DoConfigure = FALSE;
++Bool xf86ProbeIgnorePrimary = FALSE;
+ Bool xf86DoShowOptions = FALSE;
+ DriverPtr *xf86DriverList = NULL;
+ int xf86NumDrivers = 0;
+diff --git a/hw/xfree86/common/xf86pciBus.c b/hw/xfree86/common/xf86pciBus.c
+index 8158c2b..9adfee5 100644
+--- a/hw/xfree86/common/xf86pciBus.c
++++ b/hw/xfree86/common/xf86pciBus.c
+@@ -352,6 +352,10 @@ xf86ComparePciBusString(const char *busID, int bus, int device, int func)
+ Bool
+ xf86IsPrimaryPci(struct pci_device *pPci)
+ {
++ /* Add max. 1 screen for the IgnorePrimary fallback path */
++ if (xf86ProbeIgnorePrimary && xf86NumScreens == 0)
++ return TRUE;
++
+ if (primaryBus.type == BUS_PCI)
+ return pPci == primaryBus.id.pci;
+ #ifdef XSERVER_PLATFORM_BUS
+diff --git a/hw/xfree86/common/xf86platformBus.c b/hw/xfree86/common/xf86platformBus.c
+index 8dd0d5d..063e81c 100644
+--- a/hw/xfree86/common/xf86platformBus.c
++++ b/hw/xfree86/common/xf86platformBus.c
+@@ -114,6 +114,10 @@ xf86_find_platform_device_by_devnum(int major, int minor)
+ static Bool
+ xf86IsPrimaryPlatform(struct xf86_platform_device *plat)
+ {
++ /* Add max. 1 screen for the IgnorePrimary fallback path */
++ if (xf86ProbeIgnorePrimary && xf86NumScreens == 0)
++ return TRUE;
++
+ if (primaryBus.type == BUS_PLATFORM)
+ return plat == primaryBus.id.plat;
+ #ifdef XSERVER_LIBPCIACCESS
+--
+2.9.3
+
+From c57c1e53ea3d76ebba5b2a23b7260817d3e6b921 Mon Sep 17 00:00:00 2001
+From: Hans De Goede <hdegoede at redhat.com>
+Date: Mon, 12 Dec 2016 17:03:12 +0100
+Subject: [PATCH xserver 1/6] xfree86: Free devlist returned by xf86MatchDevice
+
+xf86MatchDevice returns a dynamically allocated list of GDevPtr-s,
+free this when we're done with it.
+
+Reviewed-by: Adam Jackson <ajax at redhat.com>
+Signed-off-by: Hans de Goede <hdegoede at redhat.com>
+---
+ hw/xfree86/common/xf86platformBus.c | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+diff --git a/hw/xfree86/common/xf86platformBus.c b/hw/xfree86/common/xf86platformBus.c
+index 063e81c..16d934f 100644
+--- a/hw/xfree86/common/xf86platformBus.c
++++ b/hw/xfree86/common/xf86platformBus.c
+@@ -479,6 +479,8 @@ xf86platformProbeDev(DriverPtr drvp)
+ isGPUDevice(devList[i]) ? PLATFORM_PROBE_GPU_SCREEN : 0);
+ }
+
++ free(devList);
++
+ return foundScreen;
+ }
+
+@@ -505,6 +507,8 @@ xf86platformAddGPUDevices(DriverPtr drvp)
+ }
+ }
+
++ free(devList);
++
+ return foundScreen;
+ }
+
+--
+2.9.3
+
+From 08b84d72878e43401e99059c3c926dfa42a360c3 Mon Sep 17 00:00:00 2001
+From: Hans De Goede <hdegoede at redhat.com>
+Date: Mon, 12 Dec 2016 17:03:13 +0100
+Subject: [PATCH xserver 2/6] xfree86: Make OutputClassMatches take a
+ xf86_platform_device
+
+Make OutputClassMatches directly take a xf86_platform_device as argument,
+rather then an index into xf86_platform_devices. This makes things
+easier for callers which already have a xf86_platform_device pointer.
+
+Reviewed-by: Adam Jackson <ajax at redhat.com>
+Signed-off-by: Hans de Goede <hdegoede at redhat.com>
+---
+ hw/xfree86/common/xf86platformBus.c | 7 ++++---
+ 1 file changed, 4 insertions(+), 3 deletions(-)
+
+diff --git a/hw/xfree86/common/xf86platformBus.c b/hw/xfree86/common/xf86platformBus.c
+index 16d934f..25a9040 100644
+--- a/hw/xfree86/common/xf86platformBus.c
++++ b/hw/xfree86/common/xf86platformBus.c
+@@ -214,9 +214,10 @@ MatchToken(const char *value, struct xorg_list *patterns,
+ }
+
+ static Bool
+-OutputClassMatches(const XF86ConfOutputClassPtr oclass, int index)
++OutputClassMatches(const XF86ConfOutputClassPtr oclass,
++ struct xf86_platform_device *dev)
+ {
+- char *driver = xf86_platform_odev_attributes(index)->driver;
++ char *driver = dev->attribs->driver;
+
+ if (!MatchToken(driver, &oclass->match_driver, strcmp))
+ return FALSE;
+@@ -234,7 +235,7 @@ xf86OutputClassDriverList(int index, char *matches[], int nmatches)
+ return 0;
+
+ for (cl = xf86configptr->conf_outputclass_lst; cl; cl = cl->list.next) {
+- if (OutputClassMatches(cl, index)) {
++ if (OutputClassMatches(cl, &xf86_platform_devices[index])) {
+ char *path = xf86_platform_odev_attributes(index)->path;
+
+ xf86Msg(X_INFO, "Applying OutputClass \"%s\" to %s\n",
+--
+2.9.3
+
+From 9cd3cc75269d9196898487b5712ee47b8291e077 Mon Sep 17 00:00:00 2001
+From: Hans De Goede <hdegoede at redhat.com>
+Date: Mon, 12 Dec 2016 17:03:14 +0100
+Subject: [PATCH xserver 3/6] xfree86: Add options support for OutputClass
+ Options
+
+Add support for setting options in OutputClass Sections and having these
+applied to any matching output devices.
+
+Reviewed-by: Adam Jackson <ajax at redhat.com>
+Signed-off-by: Hans de Goede <hdegoede at redhat.com>
+---
+ hw/xfree86/common/xf86Option.c | 5 ++++-
+ hw/xfree86/common/xf86platformBus.c | 42 +++++++++++++++++++++++++++++++++++++
+ hw/xfree86/common/xf86platformBus.h | 2 ++
+ hw/xfree86/man/xorg.conf.man | 10 +++++++++
+ hw/xfree86/parser/OutputClass.c | 6 ++++++
+ hw/xfree86/parser/xf86Parser.h | 1 +
+ 6 files changed, 65 insertions(+), 1 deletion(-)
+
+diff --git a/hw/xfree86/common/xf86Option.c b/hw/xfree86/common/xf86Option.c
+index 0e8bc1f..929724d 100644
+--- a/hw/xfree86/common/xf86Option.c
++++ b/hw/xfree86/common/xf86Option.c
+@@ -44,6 +44,7 @@
+ #include "xf86Xinput.h"
+ #include "xf86Optrec.h"
+ #include "xf86Parser.h"
++#include "xf86platformBus.h" /* For OutputClass functions */
+ #include "optionstr.h"
+
+ static Bool ParseOptionValue(int scrnIndex, XF86OptionPtr options,
+@@ -64,7 +65,7 @@ static Bool ParseOptionValue(int scrnIndex, XF86OptionPtr options,
+ *
+ * The order of precedence for options is:
+ *
+- * extraOpts, display, confScreen, monitor, device
++ * extraOpts, display, confScreen, monitor, device, outputClassOptions
+ */
+
+ void
+@@ -79,6 +80,8 @@ xf86CollectOptions(ScrnInfoPtr pScrn, XF86OptionPtr extraOpts)
+ pScrn->options = NULL;
+
+ for (i = pScrn->numEntities - 1; i >= 0; i--) {
++ xf86MergeOutputClassOptions(pScrn->entityList[i], &pScrn->options);
++
+ device = xf86GetDevFromEntity(pScrn->entityList[i],
+ pScrn->entityInstanceList[i]);
+ if (device && device->options) {
+diff --git a/hw/xfree86/common/xf86platformBus.c b/hw/xfree86/common/xf86platformBus.c
+index 25a9040..a698c6c 100644
+--- a/hw/xfree86/common/xf86platformBus.c
++++ b/hw/xfree86/common/xf86platformBus.c
+@@ -310,6 +310,48 @@ xf86platformProbe(void)
+ return 0;
+ }
+
++void
++xf86MergeOutputClassOptions(int entityIndex, void **options)
++{
++ const EntityPtr entity = xf86Entities[entityIndex];
++ struct xf86_platform_device *dev = NULL;
++ XF86ConfOutputClassPtr cl;
++ XF86OptionPtr classopts;
++ int i = 0;
++
++ switch (entity->bus.type) {
++ case BUS_PLATFORM:
++ dev = entity->bus.id.plat;
++ break;
++ case BUS_PCI:
++ for (i = 0; i < xf86_num_platform_devices; i++) {
++ if (MATCH_PCI_DEVICES(xf86_platform_devices[i].pdev,
++ entity->bus.id.pci)) {
++ dev = &xf86_platform_devices[i];
++ break;
++ }
++ }
++ break;
++ default:
++ xf86Msg(X_DEBUG, "xf86MergeOutputClassOptions unsupported bus type %d\n",
++ entity->bus.type);
++ }
++
++ if (!dev)
++ return;
++
++ for (cl = xf86configptr->conf_outputclass_lst; cl; cl = cl->list.next) {
++ if (!OutputClassMatches(cl, dev) || !cl->option_lst)
++ continue;
++
++ xf86Msg(X_INFO, "Applying OutputClass \"%s\" options to %s\n",
++ cl->identifier, dev->attribs->path);
++
++ classopts = xf86optionListDup(cl->option_lst);
++ *options = xf86optionListMerge(*options, classopts);
++ }
++}
++
+ static int
+ xf86ClaimPlatformSlot(struct xf86_platform_device * d, DriverPtr drvp,
+ int chipset, GDevPtr dev, Bool active)
+diff --git a/hw/xfree86/common/xf86platformBus.h b/hw/xfree86/common/xf86platformBus.h
+index 0f5c0ef..70d9ec8 100644
+--- a/hw/xfree86/common/xf86platformBus.h
++++ b/hw/xfree86/common/xf86platformBus.h
+@@ -42,6 +42,7 @@ struct xf86_platform_device {
+ int xf86platformProbe(void);
+ int xf86platformProbeDev(DriverPtr drvp);
+ int xf86platformAddGPUDevices(DriverPtr drvp);
++void xf86MergeOutputClassOptions(int entityIndex, void **options);
+
+ extern int xf86_num_platform_devices;
+ extern struct xf86_platform_device *xf86_platform_devices;
+@@ -161,6 +162,7 @@ extern void xf86platformPrimary(void);
+ #else
+
+ static inline int xf86platformAddGPUDevices(DriverPtr drvp) { return FALSE; }
++static inline void xf86MergeOutputClassOptions(int index, void **options) {}
+
+ #endif
+
+diff --git a/hw/xfree86/man/xorg.conf.man b/hw/xfree86/man/xorg.conf.man
+index 7d0c524..8928a53 100644
+--- a/hw/xfree86/man/xorg.conf.man
++++ b/hw/xfree86/man/xorg.conf.man
+@@ -1280,6 +1280,16 @@ For example:
+ Check the case-sensitive string
+ .RI \*q matchdriver \*q
+ against the kernel driver of the device.
++.PP
++When an output device has been matched to the
++.B OutputClass
++section, any
++.B Option
++entries are applied to the device. See the
++.B Device
++section below for a description of the remaining
++.B Option
++entries.
+ .SH "DEVICE SECTION"
+ The config file may have multiple
+ .B Device
+diff --git a/hw/xfree86/parser/OutputClass.c b/hw/xfree86/parser/OutputClass.c
+index 8064e0c..f813ee6 100644
+--- a/hw/xfree86/parser/OutputClass.c
++++ b/hw/xfree86/parser/OutputClass.c
+@@ -36,6 +36,7 @@ static const xf86ConfigSymTabRec OutputClassTab[] = {
+ {ENDSECTION, "endsection"},
+ {IDENTIFIER, "identifier"},
+ {DRIVER, "driver"},
++ {OPTION, "option"},
+ {MATCH_DRIVER, "matchdriver"},
+ {-1, ""},
+ };
+@@ -60,6 +61,8 @@ xf86freeOutputClassList(XF86ConfOutputClassPtr ptr)
+ free(group);
+ }
+
++ xf86optionListFree(ptr->option_lst);
++
+ prev = ptr;
+ ptr = ptr->list.next;
+ free(prev);
+@@ -112,6 +115,9 @@ xf86parseOutputClassSection(void)
+ else
+ ptr->driver = xf86_lex_val.str;
+ break;
++ case OPTION:
++ ptr->option_lst = xf86parseOption(ptr->option_lst);
++ break;
+ case MATCH_DRIVER:
+ if (xf86getSubToken(&(ptr->comment)) != STRING)
+ Error(QUOTE_MSG, "MatchDriver");
+diff --git a/hw/xfree86/parser/xf86Parser.h b/hw/xfree86/parser/xf86Parser.h
+index 9c4b403..897edab 100644
+--- a/hw/xfree86/parser/xf86Parser.h
++++ b/hw/xfree86/parser/xf86Parser.h
+@@ -338,6 +338,7 @@ typedef struct {
+ char *identifier;
+ char *driver;
+ struct xorg_list match_driver;
++ XF86OptionPtr option_lst;
+ char *comment;
+ } XF86ConfOutputClassRec, *XF86ConfOutputClassPtr;
+
+--
+2.9.3
+
+From ab1a65b7755d081b41188104b21f4d21eaa3187b Mon Sep 17 00:00:00 2001
+From: Hans De Goede <hdegoede at redhat.com>
+Date: Mon, 12 Dec 2016 17:03:15 +0100
+Subject: [PATCH xserver 4/6] xfree86: xf86platformProbe: split finding
+ pci-info and setting primary GPU
+
+This is a preparation patch for allowing an OutputClass section to
+override the default primary GPU device selection.
+
+Reviewed-by: Adam Jackson <ajax at redhat.com>
+Signed-off-by: Hans de Goede <hdegoede at redhat.com>
+---
+ hw/xfree86/common/xf86platformBus.c | 23 +++++++++++++++--------
+ 1 file changed, 15 insertions(+), 8 deletions(-)
+
+diff --git a/hw/xfree86/common/xf86platformBus.c b/hw/xfree86/common/xf86platformBus.c
+index a698c6c..39b3248 100644
+--- a/hw/xfree86/common/xf86platformBus.c
++++ b/hw/xfree86/common/xf86platformBus.c
+@@ -145,16 +145,9 @@ platform_find_pci_info(struct xf86_platform_device *pd, char *busid)
+
+ iter = pci_slot_match_iterator_create(&devmatch);
+ info = pci_device_next(iter);
+- if (info) {
++ if (info)
+ pd->pdev = info;
+- pci_device_probe(info);
+- if (pci_device_is_boot_vga(info)) {
+- primaryBus.type = BUS_PLATFORM;
+- primaryBus.id.plat = pd;
+- }
+- }
+ pci_iterator_destroy(iter);
+-
+ }
+
+ static Bool
+@@ -307,6 +300,20 @@ xf86platformProbe(void)
+ platform_find_pci_info(&xf86_platform_devices[i], busid);
+ }
+ }
++
++ for (i = 0; i < xf86_num_platform_devices; i++) {
++ struct xf86_platform_device *dev = &xf86_platform_devices[i];
++
++ if (!dev->pdev)
++ continue;
++
++ pci_device_probe(dev->pdev);
++ if (pci_device_is_boot_vga(dev->pdev)) {
++ primaryBus.type = BUS_PLATFORM;
++ primaryBus.id.plat = dev;
++ }
++ }
++
+ return 0;
+ }
+
+--
+2.9.3
+
+From d75ffcdbf8c1e3c8e0d46debcd533a9f2560f0a8 Mon Sep 17 00:00:00 2001
+From: Hans De Goede <hdegoede at redhat.com>
+Date: Mon, 12 Dec 2016 17:03:16 +0100
+Subject: [PATCH xserver 5/6] xfree86: Allow overriding primary GPU detection
+ from an OutputClass section
+
+Allow using:
+
+Option "PrimaryGPU" "yes"
+
+In an OutputClass section to override the default primary GPU device
+selection which selects the GPU used as output by the firmware.
+
+If multiple output devices match an OutputClass section with
+the PrimaryGPU option set, the first one enumerated becomes the
+primary GPU.
+
+Reviewed-by: Adam Jackson <ajax at redhat.com>
+Signed-off-by: Hans de Goede <hdegoede at redhat.com>
+---
+ hw/xfree86/common/xf86platformBus.c | 19 +++++++++++++++++++
+ hw/xfree86/man/xorg.conf.man | 12 +++++++++++-
+ 2 files changed, 30 insertions(+), 1 deletion(-)
+
+diff --git a/hw/xfree86/common/xf86platformBus.c b/hw/xfree86/common/xf86platformBus.c
+index 39b3248..fc17d15 100644
+--- a/hw/xfree86/common/xf86platformBus.c
++++ b/hw/xfree86/common/xf86platformBus.c
+@@ -286,6 +286,7 @@ xf86platformProbe(void)
+ {
+ int i;
+ Bool pci = TRUE;
++ XF86ConfOutputClassPtr cl;
+
+ config_odev_probe(xf86PlatformDeviceProbe);
+
+@@ -301,6 +302,24 @@ xf86platformProbe(void)
+ }
+ }
+
++ /* First see if there is an OutputClass match marking a device as primary */
++ for (i = 0; i < xf86_num_platform_devices; i++) {
++ struct xf86_platform_device *dev = &xf86_platform_devices[i];
++ for (cl = xf86configptr->conf_outputclass_lst; cl; cl = cl->list.next) {
++ if (!OutputClassMatches(cl, dev))
++ continue;
++
++ if (xf86CheckBoolOption(cl->option_lst, "PrimaryGPU", FALSE)) {
++ xf86Msg(X_CONFIG, "OutputClass \"%s\" setting %s as PrimaryGPU\n",
++ cl->identifier, dev->attribs->path);
++ primaryBus.type = BUS_PLATFORM;
++ primaryBus.id.plat = dev;
++ return 0;
++ }
++ }
++ }
++
++ /* Then check for pci_device_is_boot_vga() */
+ for (i = 0; i < xf86_num_platform_devices; i++) {
+ struct xf86_platform_device *dev = &xf86_platform_devices[i];
+
+diff --git a/hw/xfree86/man/xorg.conf.man b/hw/xfree86/man/xorg.conf.man
+index 8928a53..79b71a8 100644
+--- a/hw/xfree86/man/xorg.conf.man
++++ b/hw/xfree86/man/xorg.conf.man
+@@ -1285,11 +1285,21 @@ When an output device has been matched to the
+ .B OutputClass
+ section, any
+ .B Option
+-entries are applied to the device. See the
++entries are applied to the device. One
++.B OutputClass
++specific
++.B Option
++is recognized. See the
+ .B Device
+ section below for a description of the remaining
+ .B Option
+ entries.
++.TP 7
++.BI "Option \*qPrimaryGPU\*q \*q" boolean \*q
++This option specifies that the matched device should be treated as the
++primary GPU, replacing the selection of the GPU used as output by the
++firmware. If multiple output devices match an OutputClass section with
++the PrimaryGPU option set, the first one enumerated becomes the primary GPU.
+ .SH "DEVICE SECTION"
+ The config file may have multiple
+ .B Device
+--
+2.9.3
+
+From b5dffbbac193aa640ffcfa0a431c21b862854e53 Mon Sep 17 00:00:00 2001
+From: Hans De Goede <hdegoede at redhat.com>
+Date: Mon, 12 Dec 2016 17:03:17 +0100
+Subject: [PATCH xserver 6/6] xfree86: Add ModulePath support for OutputClass
+ config Sections
+
+Allow OutputClass config snippets to modify the module-path.
+
+Note that any specified ModulePaths will be pre-pended to the normal
+ModulePath. The idea behind this is that any output hardware specific
+modules should have preference over the normal modules.
+
+One use-case for this is the nvidia binary driver, this allows a
+config snippet like this:
+
+Section "OutputClass"
+ MatchDriver "nvidia"
+ Modulepath "/usr/lib64/nvidia/modules"
+EndSection
+
+To get the nvidia glx specific glx module loaded, but only when the
+nvidia kernel driver is loaded.
+
+Together with the glvnd work done recently, this allows the nouveau
++ mesa and nvidia-binary userspace stacks to co-exist on the same
+system without any ldconfig / xorg.conf tweaking and the xserver will
+automatically do the right thing depending on which kernel driver
+(nouveau or nvidia) is loaded.
+
+Reviewed-by: Adam Jackson <ajax at redhat.com>
+Signed-off-by: Hans de Goede <hdegoede at redhat.com>
+---
+ hw/xfree86/common/xf86platformBus.c | 23 +++++++++++++++++++++++
+ hw/xfree86/loader/loadmod.c | 1 +
+ hw/xfree86/man/xorg.conf.man | 16 ++++++++++++++++
+ hw/xfree86/parser/OutputClass.c | 15 +++++++++++++++
+ hw/xfree86/parser/xf86Parser.h | 1 +
+ 5 files changed, 56 insertions(+)
+
+diff --git a/hw/xfree86/common/xf86platformBus.c b/hw/xfree86/common/xf86platformBus.c
+index fc17d15..0b5795f 100644
+--- a/hw/xfree86/common/xf86platformBus.c
++++ b/hw/xfree86/common/xf86platformBus.c
+@@ -40,6 +40,7 @@
+ #include "hotplug.h"
+ #include "systemd-logind.h"
+
++#include "loaderProcs.h"
+ #include "xf86.h"
+ #include "xf86_OSproc.h"
+ #include "xf86Priv.h"
+@@ -287,6 +288,7 @@ xf86platformProbe(void)
+ int i;
+ Bool pci = TRUE;
+ XF86ConfOutputClassPtr cl;
++ char *old_path, *path = NULL;
+
+ config_odev_probe(xf86PlatformDeviceProbe);
+
+@@ -300,8 +302,29 @@ xf86platformProbe(void)
+ if (pci && (strncmp(busid, "pci:", 4) == 0)) {
+ platform_find_pci_info(&xf86_platform_devices[i], busid);
+ }
++
++ /*
++ * Deal with OutputClass ModulePath directives, these must be
++ * processed before we do any module loading.
++ */
++ for (cl = xf86configptr->conf_outputclass_lst; cl; cl = cl->list.next) {
++ if (!OutputClassMatches(cl, &xf86_platform_devices[i]))
++ continue;
++
++ if (cl->modulepath && xf86ModPathFrom != X_CMDLINE) {
++ old_path = path;
++ XNFasprintf(&path, "%s,%s", cl->modulepath,
++ path ? path : xf86ModulePath);
++ free(old_path);
++ xf86Msg(X_CONFIG, "OutputClass \"%s\" ModulePath extended to \"%s\"\n",
++ cl->identifier, path);
++ LoaderSetPath(path);
++ }
++ }
+ }
+
++ free(path);
++
+ /* First see if there is an OutputClass match marking a device as primary */
+ for (i = 0; i < xf86_num_platform_devices; i++) {
+ struct xf86_platform_device *dev = &xf86_platform_devices[i];
+diff --git a/hw/xfree86/loader/loadmod.c b/hw/xfree86/loader/loadmod.c
+index 8bf6836..940f5fc 100644
+--- a/hw/xfree86/loader/loadmod.c
++++ b/hw/xfree86/loader/loadmod.c
+@@ -184,6 +184,7 @@ LoaderSetPath(const char *path)
+ if (!path)
+ return;
+
++ FreeStringList(defaultPathList);
+ defaultPathList = InitPathList(path);
+ }
+
+diff --git a/hw/xfree86/man/xorg.conf.man b/hw/xfree86/man/xorg.conf.man
+index 79b71a8..00ebf56 100644
+--- a/hw/xfree86/man/xorg.conf.man
++++ b/hw/xfree86/man/xorg.conf.man
+@@ -1300,6 +1300,22 @@ This option specifies that the matched device should be treated as the
+ primary GPU, replacing the selection of the GPU used as output by the
+ firmware. If multiple output devices match an OutputClass section with
+ the PrimaryGPU option set, the first one enumerated becomes the primary GPU.
++.PP
++A
++.B OutputClass
++Section may contain
++.B ModulePath
++entries. When an output device matches an
++.B OutputClass
++section, any
++.B ModulePath
++entries in that
++.B OutputClass
++are pre-pended to the search path for loadable Xorg server modules. See
++.B ModulePath
++in the
++.B Files
++section for more info.
+ .SH "DEVICE SECTION"
+ The config file may have multiple
+ .B Device
+diff --git a/hw/xfree86/parser/OutputClass.c b/hw/xfree86/parser/OutputClass.c
+index f813ee6..01b348f 100644
+--- a/hw/xfree86/parser/OutputClass.c
++++ b/hw/xfree86/parser/OutputClass.c
+@@ -36,6 +36,7 @@ static const xf86ConfigSymTabRec OutputClassTab[] = {
+ {ENDSECTION, "endsection"},
+ {IDENTIFIER, "identifier"},
+ {DRIVER, "driver"},
++ {MODULEPATH, "modulepath"},
+ {OPTION, "option"},
+ {MATCH_DRIVER, "matchdriver"},
+ {-1, ""},
+@@ -53,6 +54,7 @@ xf86freeOutputClassList(XF86ConfOutputClassPtr ptr)
+ TestFree(ptr->identifier);
+ TestFree(ptr->comment);
+ TestFree(ptr->driver);
++ TestFree(ptr->modulepath);
+
+ xorg_list_for_each_entry_safe(group, next, &ptr->match_driver, entry) {
+ xorg_list_del(&group->entry);
+@@ -115,6 +117,19 @@ xf86parseOutputClassSection(void)
+ else
+ ptr->driver = xf86_lex_val.str;
+ break;
++ case MODULEPATH:
++ if (xf86getSubToken(&(ptr->comment)) != STRING)
++ Error(QUOTE_MSG, "ModulePath");
++ if (ptr->modulepath) {
++ char *path;
++ XNFasprintf(&path, "%s,%s", ptr->modulepath, xf86_lex_val.str);
++ free(xf86_lex_val.str);
++ free(ptr->modulepath);
++ ptr->modulepath = path;
++ } else {
++ ptr->modulepath = xf86_lex_val.str;
++ }
++ break;
+ case OPTION:
+ ptr->option_lst = xf86parseOption(ptr->option_lst);
+ break;
+diff --git a/hw/xfree86/parser/xf86Parser.h b/hw/xfree86/parser/xf86Parser.h
+index 897edab..e014048 100644
+--- a/hw/xfree86/parser/xf86Parser.h
++++ b/hw/xfree86/parser/xf86Parser.h
+@@ -337,6 +337,7 @@ typedef struct {
+ GenericListRec list;
+ char *identifier;
+ char *driver;
++ char *modulepath;
+ struct xorg_list match_driver;
+ XF86OptionPtr option_lst;
+ char *comment;
+--
+2.9.3
+
Copied: xorg-server/repos/testing-x86_64/xorg-server.install (from rev 315463, xorg-server/trunk/xorg-server.install)
===================================================================
--- testing-x86_64/xorg-server.install (rev 0)
+++ testing-x86_64/xorg-server.install 2018-01-26 10:35:06 UTC (rev 315464)
@@ -0,0 +1,18 @@
+post_upgrade() {
+ if (( $(vercmp $2 1.16.0-3) < 0 )); then
+ post_install
+ fi
+}
+
+post_install() {
+ cat <<MSG
+>>> xorg-server has now the ability to run without root rights with
+ the help of systemd-logind. xserver will fail to run if not launched
+ from the same virtual terminal as was used to log in.
+ Without root rights, log files will be in ~/.local/share/xorg/ directory.
+
+ Old behavior can be restored through Xorg.wrap config file.
+ See Xorg.wrap man page (man xorg.wrap).
+MSG
+}
+
Copied: xorg-server/repos/testing-x86_64/xserver-autobind-hotplug.patch (from rev 315463, xorg-server/trunk/xserver-autobind-hotplug.patch)
===================================================================
--- testing-x86_64/xserver-autobind-hotplug.patch (rev 0)
+++ testing-x86_64/xserver-autobind-hotplug.patch 2018-01-26 10:35:06 UTC (rev 315464)
@@ -0,0 +1,302 @@
+From 4471df41ea6e94834a2b10643ca7fcd69682d276 Mon Sep 17 00:00:00 2001
+From: Dave Airlie <airlied at redhat.com>
+Date: Fri, 17 Aug 2012 09:49:24 +1000
+Subject: [PATCH xserver v3] autobind GPUs to the screen
+
+This is a modified version of a patch we've been carry-ing in Fedora and
+RHEL for years now. This patch automatically adds secondary GPUs to the
+master as output sink / offload source making e.g. the use of
+slave-outputs just work, with requiring the user to manually run
+"xrandr --setprovideroutputsource" before he can hookup an external
+monitor to his hybrid graphics laptop.
+
+There is one problem with this patch, which is why it was not upstreamed
+before. What to do when a secondary GPU gets detected really is a policy
+decission (e.g. one may want to autobind PCI GPUs but not USB ones) and
+as such should be under control of the Desktop Environment.
+
+Unconditionally adding autobinding support to the xserver will result
+in races between the DE dealing with the hotplug of a secondary GPU
+and the server itself dealing with it.
+
+However we've waited for years for any Desktop Environments to actually
+start doing some sort of autoconfiguration of secondary GPUs and there
+is still not a single DE dealing with this, so I believe that it is
+time to upstream this now.
+
+To avoid potential future problems if any DEs get support for doing
+secondary GPU configuration themselves, the new autobind functionality
+is made optional. Since no DEs currently support doing this themselves it
+is enabled by default. When DEs grow support for doing this themselves
+they can disable the servers autobinding through the servers cmdline or a
+xorg.conf snippet.
+
+Signed-off-by: Dave Airlie <airlied at gmail.com>
+[hdegoede at redhat.com: Make configurable, fix with nvidia, submit upstream]
+Signed-off-by: Hans de Goede <hdegoede at redhat.com>
+---
+Changes in v2:
+-Make the default enabled instead of installing a xorg.conf
+ snippet which enables it unconditionally
+Changes in v3:
+-Handle GPUScreen autoconfig in randr/rrprovider.c, looking at
+ rrScrPriv->provider, rather then in hw/xfree86/modes/xf86Crtc.c
+ looking at xf86CrtcConfig->provider. This fixes the autoconfig not
+ working with the nvidia binary driver
+---
+ hw/xfree86/common/xf86Config.c | 19 +++++++++++++++++++
+ hw/xfree86/common/xf86Globals.c | 2 ++
+ hw/xfree86/common/xf86Init.c | 20 ++++++++++++++++++++
+ hw/xfree86/common/xf86Priv.h | 1 +
+ hw/xfree86/common/xf86Privstr.h | 1 +
+ hw/xfree86/common/xf86platformBus.c | 4 ++++
+ hw/xfree86/man/Xorg.man | 7 +++++++
+ hw/xfree86/man/xorg.conf.man | 6 ++++++
+ randr/randrstr.h | 3 +++
+ randr/rrprovider.c | 22 ++++++++++++++++++++++
+ 10 files changed, 85 insertions(+)
+
+diff --git a/hw/xfree86/common/xf86Config.c b/hw/xfree86/common/xf86Config.c
+index 21daf1a..df3ca50 100644
+--- a/hw/xfree86/common/xf86Config.c
++++ b/hw/xfree86/common/xf86Config.c
+@@ -719,6 +719,7 @@ typedef enum {
+ FLAG_DRI2,
+ FLAG_USE_SIGIO,
+ FLAG_AUTO_ADD_GPU,
++ FLAG_AUTO_BIND_GPU,
+ FLAG_MAX_CLIENTS,
+ FLAG_IGLX,
+ } FlagValues;
+@@ -778,6 +779,8 @@ static OptionInfoRec FlagOptions[] = {
+ {0}, FALSE},
+ {FLAG_AUTO_ADD_GPU, "AutoAddGPU", OPTV_BOOLEAN,
+ {0}, FALSE},
++ {FLAG_AUTO_BIND_GPU, "AutoBindGPU", OPTV_BOOLEAN,
++ {0}, FALSE},
+ {FLAG_MAX_CLIENTS, "MaxClients", OPTV_INTEGER,
+ {0}, FALSE },
+ {FLAG_IGLX, "IndirectGLX", OPTV_BOOLEAN,
+@@ -857,6 +860,22 @@ configServerFlags(XF86ConfFlagsPtr flagsconf, XF86OptionPtr layoutopts)
+ }
+ xf86Msg(from, "%sutomatically adding GPU devices\n",
+ xf86Info.autoAddGPU ? "A" : "Not a");
++
++ if (xf86AutoBindGPUDisabled) {
++ xf86Info.autoBindGPU = FALSE;
++ from = X_CMDLINE;
++ }
++ else if (xf86IsOptionSet(FlagOptions, FLAG_AUTO_BIND_GPU)) {
++ xf86GetOptValBool(FlagOptions, FLAG_AUTO_BIND_GPU,
++ &xf86Info.autoBindGPU);
++ from = X_CONFIG;
++ }
++ else {
++ from = X_DEFAULT;
++ }
++ xf86Msg(from, "%sutomatically binding GPU devices\n",
++ xf86Info.autoBindGPU ? "A" : "Not a");
++
+ /*
+ * Set things up based on the config file information. Some of these
+ * settings may be overridden later when the command line options are
+diff --git a/hw/xfree86/common/xf86Globals.c b/hw/xfree86/common/xf86Globals.c
+index e962b75..0d1e31b 100644
+--- a/hw/xfree86/common/xf86Globals.c
++++ b/hw/xfree86/common/xf86Globals.c
+@@ -136,6 +136,7 @@ xf86InfoRec xf86Info = {
+ #else
+ .autoAddGPU = FALSE,
+ #endif
++ .autoBindGPU = TRUE,
+ };
+
+ const char *xf86ConfigFile = NULL;
+@@ -197,6 +198,7 @@ Bool xf86FlipPixels = FALSE;
+ Gamma xf86Gamma = { 0.0, 0.0, 0.0 };
+
+ Bool xf86AllowMouseOpenFail = FALSE;
++Bool xf86AutoBindGPUDisabled = FALSE;
+
+ #ifdef XF86VIDMODE
+ Bool xf86VidModeDisabled = FALSE;
+diff --git a/hw/xfree86/common/xf86Init.c b/hw/xfree86/common/xf86Init.c
+index a544b65..b0cba3d 100644
+--- a/hw/xfree86/common/xf86Init.c
++++ b/hw/xfree86/common/xf86Init.c
+@@ -76,6 +76,7 @@
+ #include "xf86DDC.h"
+ #include "xf86Xinput.h"
+ #include "xf86InPriv.h"
++#include "xf86Crtc.h"
+ #include "picturestr.h"
+
+ #include "xf86Bus.h"
+@@ -298,6 +299,19 @@ xf86PrivsElevated(void)
+ }
+
+ static void
++xf86AutoConfigOutputDevices(void)
++{
++ int i;
++
++ if (!xf86Info.autoBindGPU)
++ return;
++
++ for (i = 0; i < xf86NumGPUScreens; i++)
++ RRProviderAutoConfigGpuScreen(xf86ScrnToScreen(xf86GPUScreens[i]),
++ xf86ScrnToScreen(xf86Screens[0]));
++}
++
++static void
+ InstallSignalHandlers(void)
+ {
+ /*
+@@ -871,6 +885,8 @@ InitOutput(ScreenInfo * pScreenInfo, int argc, char **argv)
+ for (i = 0; i < xf86NumGPUScreens; i++)
+ AttachUnboundGPU(xf86Screens[0]->pScreen, xf86GPUScreens[i]->pScreen);
+
++ xf86AutoConfigOutputDevices();
++
+ xf86VGAarbiterWrapFunctions();
+ if (sigio_blocked)
+ input_unlock();
+@@ -1389,6 +1405,10 @@ ddxProcessArgument(int argc, char **argv, int i)
+ xf86Info.iglxFrom = X_CMDLINE;
+ return 0;
+ }
++ if (!strcmp(argv[i], "-noautoBindGPU")) {
++ xf86AutoBindGPUDisabled = TRUE;
++ return 1;
++ }
+
+ /* OS-specific processing */
+ return xf86ProcessArgument(argc, argv, i);
+diff --git a/hw/xfree86/common/xf86Priv.h b/hw/xfree86/common/xf86Priv.h
+index c1f8a18..9a3d0df 100644
+--- a/hw/xfree86/common/xf86Priv.h
++++ b/hw/xfree86/common/xf86Priv.h
+@@ -46,6 +46,7 @@
+ extern _X_EXPORT const char *xf86ConfigFile;
+ extern _X_EXPORT const char *xf86ConfigDir;
+ extern _X_EXPORT Bool xf86AllowMouseOpenFail;
++extern _X_EXPORT Bool xf86AutoBindGPUDisabled;
+
+ #ifdef XF86VIDMODE
+ extern _X_EXPORT Bool xf86VidModeDisabled;
+diff --git a/hw/xfree86/common/xf86Privstr.h b/hw/xfree86/common/xf86Privstr.h
+index c29b3cc..4c5f54b 100644
+--- a/hw/xfree86/common/xf86Privstr.h
++++ b/hw/xfree86/common/xf86Privstr.h
+@@ -102,6 +102,7 @@ typedef struct {
+ MessageType dri2From;
+
+ Bool autoAddGPU;
++ Bool autoBindGPU;
+ } xf86InfoRec, *xf86InfoPtr;
+
+ #ifdef DPMSExtension
+diff --git a/hw/xfree86/common/xf86platformBus.c b/hw/xfree86/common/xf86platformBus.c
+index 063e81c..42789ca 100644
+--- a/hw/xfree86/common/xf86platformBus.c
++++ b/hw/xfree86/common/xf86platformBus.c
+@@ -48,6 +48,7 @@
+ #include "Pci.h"
+ #include "xf86platformBus.h"
+ #include "xf86Config.h"
++#include "xf86Crtc.h"
+
+ #include "randrstr.h"
+ int platformSlotClaimed;
+@@ -579,6 +580,9 @@ xf86platformAddDevice(int index)
+ }
+ /* attach unbound to 0 protocol screen */
+ AttachUnboundGPU(xf86Screens[0]->pScreen, xf86GPUScreens[i]->pScreen);
++ if (xf86Info.autoBindGPU)
++ RRProviderAutoConfigGpuScreen(xf86ScrnToScreen(xf86GPUScreens[i]),
++ xf86ScrnToScreen(xf86Screens[0]));
+
+ RRResourcesChanged(xf86Screens[0]->pScreen);
+ RRTellChanged(xf86Screens[0]->pScreen);
+diff --git a/hw/xfree86/man/Xorg.man b/hw/xfree86/man/Xorg.man
+index def9bfc..8df6b7d 100644
+--- a/hw/xfree86/man/Xorg.man
++++ b/hw/xfree86/man/Xorg.man
+@@ -283,6 +283,13 @@ is a comma separated list of directories to search for
+ server modules. This option is only available when the server is run
+ as root (i.e, with real-uid 0).
+ .TP 8
++.B \-noautoBindGPU
++Disable automatically setting secondary GPUs up as output sinks and offload
++sources. This is equivalent to setting the
++.B AutoBindGPU
++xorg.conf(__filemansuffix__) file option. To
++.B false.
++.TP 8
+ .B \-nosilk
+ Disable Silken Mouse support.
+ .TP 8
+diff --git a/hw/xfree86/man/xorg.conf.man b/hw/xfree86/man/xorg.conf.man
+index 7d0c524..3e596e4 100644
+--- a/hw/xfree86/man/xorg.conf.man
++++ b/hw/xfree86/man/xorg.conf.man
+@@ -673,6 +673,12 @@ Enabled by default.
+ If this option is disabled, then no GPU devices will be added from the udev
+ backend. Enabled by default. (May need to be disabled to setup Xinerama).
+ .TP 7
++.BI "Option \*qAutoBindGPU\*q \*q" boolean \*q
++If enabled then secondary GPUs will be automatically set up as output-sinks and
++offload-sources. Making e.g. laptop outputs connected only to the secondary
++GPU directly available for use without needing to run
++"xrandr --setprovideroutputsource". Enabled by default.
++.TP 7
+ .BI "Option \*qLog\*q \*q" string \*q
+ This option controls whether the log is flushed and/or synced to disk after
+ each message.
+diff --git a/randr/randrstr.h b/randr/randrstr.h
+index 706e9a7..66999d5 100644
+--- a/randr/randrstr.h
++++ b/randr/randrstr.h
+@@ -976,6 +976,9 @@ RRProviderLookup(XID id, RRProviderPtr *provider_p);
+ extern _X_EXPORT void
+ RRDeliverProviderEvent(ClientPtr client, WindowPtr pWin, RRProviderPtr provider);
+
++extern _X_EXPORT void
++RRProviderAutoConfigGpuScreen(ScreenPtr pScreen, ScreenPtr masterScreen);
++
+ /* rrproviderproperty.c */
+
+ extern _X_EXPORT void
+diff --git a/randr/rrprovider.c b/randr/rrprovider.c
+index f9df67e..abc5685 100644
+--- a/randr/rrprovider.c
++++ b/randr/rrprovider.c
+@@ -482,3 +482,25 @@ RRDeliverProviderEvent(ClientPtr client, WindowPtr pWin, RRProviderPtr provider)
+
+ WriteEventsToClient(client, 1, (xEvent *) &pe);
+ }
++
++void
++RRProviderAutoConfigGpuScreen(ScreenPtr pScreen, ScreenPtr masterScreen)
++{
++ rrScrPrivPtr pScrPriv = rrGetScrPriv(pScreen);
++ rrScrPrivPtr masterPriv = rrGetScrPriv(masterScreen);
++ RRProviderPtr provider = pScrPriv->provider;
++ RRProviderPtr master_provider = masterPriv->provider;
++
++ if (!provider || !master_provider)
++ return;
++
++ if ((provider->capabilities & RR_Capability_SinkOutput) &&
++ (master_provider->capabilities & RR_Capability_SourceOutput)) {
++ pScrPriv->rrProviderSetOutputSource(pScreen, provider, master_provider);
++ RRInitPrimeSyncProps(pScreen);
++ }
++
++ if ((provider->capabilities & RR_Capability_SourceOffload) &&
++ (master_provider->capabilities & RR_Capability_SinkOffload))
++ pScrPriv->rrProviderSetOffloadSink(pScreen, provider, master_provider);
++}
+--
+2.9.3
+
Copied: xorg-server/repos/testing-x86_64/xvfb-run (from rev 315463, xorg-server/trunk/xvfb-run)
===================================================================
--- testing-x86_64/xvfb-run (rev 0)
+++ testing-x86_64/xvfb-run 2018-01-26 10:35:06 UTC (rev 315464)
@@ -0,0 +1,180 @@
+#!/bin/sh
+
+# $Id: xvfb-run 2027 2004-11-16 14:54:16Z branden $
+
+# This script starts an instance of Xvfb, the "fake" X server, runs a command
+# with that server available, and kills the X server when done. The return
+# value of the command becomes the return value of this script.
+#
+# If anyone is using this to build a Debian package, make sure the package
+# Build-Depends on xvfb, xbase-clients, and xfonts-base.
+
+set -e
+
+PROGNAME=xvfb-run
+SERVERNUM=99
+AUTHFILE=
+ERRORFILE=/dev/null
+STARTWAIT=3
+XVFBARGS="-screen 0 640x480x8"
+LISTENTCP="-nolisten tcp"
+XAUTHPROTO=.
+
+# Query the terminal to establish a default number of columns to use for
+# displaying messages to the user. This is used only as a fallback in the event
+# the COLUMNS variable is not set. ($COLUMNS can react to SIGWINCH while the
+# script is running, and this cannot, only being calculated once.)
+DEFCOLUMNS=$(stty size 2>/dev/null | awk '{print $2}') || true
+if ! expr "$DEFCOLUMNS" : "[[:digit:]]\+$" >/dev/null 2>&1; then
+ DEFCOLUMNS=80
+fi
+
+# Display a message, wrapping lines at the terminal width.
+message () {
+ echo "$PROGNAME: $*" | fmt -t -w ${COLUMNS:-$DEFCOLUMNS}
+}
+
+# Display an error message.
+error () {
+ message "error: $*" >&2
+}
+
+# Display a usage message.
+usage () {
+ if [ -n "$*" ]; then
+ message "usage error: $*"
+ fi
+ cat <<EOF
+Usage: $PROGNAME [OPTION ...] COMMAND
+Run COMMAND (usually an X client) in a virtual X server environment.
+Options:
+-a --auto-servernum try to get a free server number, starting at
+ --server-num
+-e FILE --error-file=FILE file used to store xauth errors and Xvfb
+ output (default: $ERRORFILE)
+-f FILE --auth-file=FILE file used to store auth cookie
+ (default: ./.Xauthority)
+-h --help display this usage message and exit
+-n NUM --server-num=NUM server number to use (default: $SERVERNUM)
+-l --listen-tcp enable TCP port listening in the X server
+-p PROTO --xauth-protocol=PROTO X authority protocol name to use
+ (default: xauth command's default)
+-s ARGS --server-args=ARGS arguments (other than server number and
+ "-nolisten tcp") to pass to the Xvfb server
+ (default: "$XVFBARGS")
+-w DELAY --wait=DELAY delay in seconds to wait for Xvfb to start
+ before running COMMAND (default: $STARTWAIT)
+EOF
+}
+
+# Find a free server number by looking at .X*-lock files in /tmp.
+find_free_servernum() {
+ # Sadly, the "local" keyword is not POSIX. Leave the next line commented in
+ # the hope Debian Policy eventually changes to allow it in /bin/sh scripts
+ # anyway.
+ #local i
+
+ i=$SERVERNUM
+ while [ -f /tmp/.X$i-lock ]; do
+ i=$(($i + 1))
+ done
+ echo $i
+}
+
+# Clean up files
+clean_up() {
+ if [ -e "$AUTHFILE" ]; then
+ XAUTHORITY=$AUTHFILE xauth remove ":$SERVERNUM" >>"$ERRORFILE" 2>&1
+ fi
+ if [ -n "$XVFB_RUN_TMPDIR" ]; then
+ if ! rm -r "$XVFB_RUN_TMPDIR"; then
+ error "problem while cleaning up temporary directory"
+ exit 5
+ fi
+ fi
+}
+
+# Parse the command line.
+ARGS=$(getopt --options +ae:f:hn:lp:s:w: \
+ --long auto-servernum,error-file:,auth-file:,help,server-num:,listen-tcp,xauth-protocol:,server-args:,wait: \
+ --name "$PROGNAME" -- "$@")
+GETOPT_STATUS=$?
+
+if [ $GETOPT_STATUS -ne 0 ]; then
+ error "internal error; getopt exited with status $GETOPT_STATUS"
+ exit 6
+fi
+
+eval set -- "$ARGS"
+
+while :; do
+ case "$1" in
+ -a|--auto-servernum) SERVERNUM=$(find_free_servernum) ;;
+ -e|--error-file) ERRORFILE="$2"; shift ;;
+ -f|--auth-file) AUTHFILE="$2"; shift ;;
+ -h|--help) SHOWHELP="yes" ;;
+ -n|--server-num) SERVERNUM="$2"; shift ;;
+ -l|--listen-tcp) LISTENTCP="" ;;
+ -p|--xauth-protocol) XAUTHPROTO="$2"; shift ;;
+ -s|--server-args) XVFBARGS="$2"; shift ;;
+ -w|--wait) STARTWAIT="$2"; shift ;;
+ --) shift; break ;;
+ *) error "internal error; getopt permitted \"$1\" unexpectedly"
+ exit 6
+ ;;
+ esac
+ shift
+done
+
+if [ "$SHOWHELP" ]; then
+ usage
+ exit 0
+fi
+
+if [ -z "$*" ]; then
+ usage "need a command to run" >&2
+ exit 2
+fi
+
+if ! which xauth >/dev/null; then
+ error "xauth command not found"
+ exit 3
+fi
+
+# tidy up after ourselves
+trap clean_up EXIT
+
+# If the user did not specify an X authorization file to use, set up a temporary
+# directory to house one.
+if [ -z "$AUTHFILE" ]; then
+ XVFB_RUN_TMPDIR="$(mktemp -d -t $PROGNAME.XXXXXX)"
+ AUTHFILE="$XVFB_RUN_TMPDIR/Xauthority"
+fi
+
+# Start Xvfb.
+MCOOKIE=$(mcookie)
+XAUTHORITY=$AUTHFILE xauth source - << EOF >>"$ERRORFILE" 2>&1
+add :$SERVERNUM $XAUTHPROTO $MCOOKIE
+EOF
+XAUTHORITY=$AUTHFILE Xvfb ":$SERVERNUM" $XVFBARGS $LISTENTCP >>"$ERRORFILE" \
+ 2>&1 &
+XVFBPID=$!
+sleep "$STARTWAIT"
+if ! kill -0 $XVFBPID 2>/dev/null; then
+ echo "Xvfb failed to start" >&2
+ exit 1
+fi
+
+# Start the command and save its exit status.
+set +e
+DISPLAY=:$SERVERNUM XAUTHORITY=$AUTHFILE "$@" 2>&1
+RETVAL=$?
+set -e
+
+# Kill Xvfb now that the command has exited.
+kill $XVFBPID
+
+# Return the executed command's exit status.
+exit $RETVAL
+
+# vim:set ai et sts=4 sw=4 tw=80:
Copied: xorg-server/repos/testing-x86_64/xvfb-run.1 (from rev 315463, xorg-server/trunk/xvfb-run.1)
===================================================================
--- testing-x86_64/xvfb-run.1 (rev 0)
+++ testing-x86_64/xvfb-run.1 2018-01-26 10:35:06 UTC (rev 315464)
@@ -0,0 +1,282 @@
+.\" $Id: xvfb-run.1 2138 2005-01-17 23:40:27Z branden $
+.\"
+.\" Copyright 1998-2004 Branden Robinson <branden at debian.org>.
+.\"
+.\" This is free software; you may redistribute it and/or modify
+.\" it under the terms of the GNU General Public License as
+.\" published by the Free Software Foundation; either version 2,
+.\" or (at your option) any later version.
+.\"
+.\" This is distributed in the hope that it will be useful, but
+.\" WITHOUT ANY WARRANTY; without even the implied warranty of
+.\" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+.\" GNU General Public License for more details.
+.\"
+.\" You should have received a copy of the GNU General Public License with
+.\" the Debian operating system, in /usr/share/common-licenses/GPL; if
+.\" not, write to the Free Software Foundation, Inc., 59 Temple Place,
+.\" Suite 330, Boston, MA 02111-1307 USA
+.\"
+.\" We need the URL macro from groff's www macro package, but also want
+.\" things to work all right for people who don't have it. So we define
+.\" our own URL macro and let the www macro package override it if it's
+.\" available.
+.de URL
+\\$2 \(laURL: \\$1 \(ra\\$3
+..
+.if \n[.g] .mso www.tmac
+.TH xvfb\-run 1 "2004\-11\-12" "Debian Project"
+.SH NAME
+xvfb\-run \- run specified X client or command in a virtual X server environment
+.SH SYNOPSIS
+.B xvfb\-run
+[
+.I options
+]
+.I command
+.SH DESCRIPTION
+.B xvfb\-run
+is a wrapper for the
+.BR Xvfb (1x)
+command which simplifies the task of running commands (typically an X
+client, or a script containing a list of clients to be run) within a virtual
+X server environment.
+.PP
+.B xvfb\-run
+sets up an X authority file (or uses an existing user\-specified one),
+writes a cookie to it (see
+.BR xauth (1x))
+and then starts the
+.B Xvfb
+X server as a background process.
+The process ID of
+.B Xvfb
+is stored for later use.
+The specified
+.I command
+is then run using the X display corresponding to the
+.B Xvfb
+server
+just started and the X authority file created earlier.
+.PP
+When the
+.I command
+exits, its status is saved, the
+.B Xvfb
+server is killed (using the process ID stored earlier), the X authority
+cookie removed, and the authority file deleted (if the user did not specify
+one to use).
+.B xvfb\-run
+then exits with the exit status of
+.IR command .
+.PP
+.B xvfb\-run
+requires the
+.B xauth
+command to function.
+.SH OPTIONS
+.TP
+.B \-a\fR,\fB \-\-auto\-servernum
+Try to get a free server number, starting at 99, or the argument to
+.BR \-\-server\-num .
+.TP
+.BI \-e\ file \fR,\fB\ \-\-error\-file= file
+Store output from
+.B xauth
+and
+.B Xvfb
+in
+.IR file .
+The default is
+.IR /dev/null .
+.TP
+.BI \-f\ file \fR,\fB\ \-\-auth\-file= file
+Store X authentication data in
+.IR file .
+By default, a temporary directory called
+.IR xvfb\-run. PID
+(where PID is the process ID of
+.B xvfb\-run
+itself) is created in the directory specified by the environment variable
+.B TMPDIR
+(or
+.I /tmp
+if that variable is null or unset), and the
+.BR tempfile (1)
+command is used to create a file in that temporary directory called
+.IR Xauthority .
+.TP
+.B \-h\fR,\fB \-\-help
+Display a usage message and exit.
+.TP
+.BI \-n\ servernumber \fR,\fB\ \-\-server\-num= servernumber
+Use
+.I servernumber
+as the server number (but see the
+.B \-a\fR,\fB \-\-auto\-servernum
+option above).
+The default is 99.
+.TP
+.B \-l\fR,\fB \-\-listen\-tcp
+Enable TCP port listening in the X server.
+For security reasons (to avoid denial\-of\-service attacks or exploits),
+TCP port listening is disabled by default.
+.TP
+.BI \-p\ protocolname \fR,\fB\ \-\-xauth\-protocol= protocolname
+Use
+.I protocolname
+as the X authority protocol to use.
+The default is \(oq.\(cq, which
+.B xauth
+interprets as its own default protocol, which is MIT\-MAGIC\-COOKIE\-1.
+.TP
+.BI \-s\ arguments \fR,\fB\ \-\-server\-args= arguments
+Pass
+.I arguments
+to the
+.B Xvfb
+server.
+Be careful to quote any whitespace characters that may occur within
+.I arguments
+to prevent them from regarded as separators for
+.BR xvfb\-run 's
+own arguments.
+Also, note that specification of \(oq\-nolisten tcp\(cq in
+.I arguments
+may override the function of
+.BR xvfb\-run 's
+own
+.B \-l\fR,\fB \-\-listen\-tcp
+option, and that specification of the server number (e.g., \(oq:1\(cq) may
+be ignored because of the way the X server parses its argument list.
+Use the
+.B xvfb\-run
+option
+.BI \-n\ servernumber \fR,\fB\ \-\-server\-num= servernumber
+to achieve the latter function.
+The default is \(oq\-screen 0 640x480x8\(cq.
+.TP
+.BI \-w\ delay \fR,\fB\ \-\-wait= delay
+Wait
+.I delay
+seconds after launching
+.B Xvfb
+before attempting to start the specified command.
+The default is 3.
+.SH ENVIRONMENT
+.TP
+.B COLUMNS
+indicates the width of the terminal device in character cells.
+This value is used for formatting diagnostic messages.
+If not set, the terminal is queried using
+.BR stty (1)
+to determine its width.
+If that fails, a value of \(oq80\(cq is assumed.
+.TP
+.B TMPDIR
+specifies the directory in which to place
+.BR xvfb\-run 's
+temporary directory for storage of the X authority file; only used if the
+.B \-f
+or
+.B \-\-auth\-file
+options are not specified.
+.SH "OUTPUT FILES"
+.PP
+Unless the
+.B \-f
+or
+.B \-\-auth\-file
+options are specified, a temporary
+directory and file within it are created (and deleted) to store the X
+authority cookies used by the
+.B Xvfb
+server and client(s) run under it.
+See
+.BR tempfile (1).
+If \-f or \-\-auth\-file are used, then the specified X authority file is
+only written to, not created or deleted (though
+.B xauth
+creates an authority file itself if told to use use that does not already
+exist).
+.PP
+An error file with a user\-specified name is also created if the
+.B \-e
+or
+.B \-\-error\-file
+options are specifed; see above.
+.SH "EXIT STATUS"
+.B xvfb\-run
+uses its exit status as well as output to standard error to communicate
+diagnostics.
+The exit status of \(oq1\(cq is not used, and should be interpreted as failure
+of the specified command.
+.TP
+0
+.B xvfb\-run
+only uses this exit status if the
+.B \-h\fR,\fB \-\-help
+option is given.
+In all other situations, this may be interpreted as success of the specified
+command.
+.TP
+2
+No command to run was specified.
+.TP
+3
+The
+.B xauth
+command is not available.
+.TP
+4
+The temporary directory that was going to be used already exists; since
+.B xvfb\-run
+produces a uniquely named directory, this may indicate an attempt by another
+process on the system to exploit a temporary file race condition.
+.TP
+5
+A problem was encountered while cleaning up the temporary directory.
+.TP
+6
+A problem was encountered while using
+.BR getopt (1)
+to parse the command\-line arguments.
+.SH EXAMPLES
+.TP
+.B xvfb\-run \-\-auto\-servernum \-\-server\-num=1 xlogo
+runs the
+.BR xlogo (1x)
+demonstration client inside the
+.B Xvfb
+X server on the first available server number greater than or equal to 1.
+.TP
+.B xvfb\-run \-\-server\-args="\-screen 0 1024x768x24" ico \-faces
+runs the
+.BR ico (1x)
+demonstration client (and passes it the
+.B \-faces
+argument) inside the
+.B Xvfb
+X server, configured with a root window of 1024 by 768 pixels and a color
+depth of 24 bits.
+.PP
+Note that the demo X clients used in the above examples will not exit on
+their own, so they will have to be killed before
+.B xvfb\-run
+will exit.
+.SH BUGS
+See
+.URL "http://bugs.debian.org/xvfb" "the Debian Bug Tracking System" .
+If you wish to report a bug in
+.BR xvfb\-run ,
+please use the
+.BR reportbug (1)
+command.
+.SH AUTHOR
+.B xfvb\-run
+was written by Branden Robinson and Jeff Licquia with sponsorship from
+Progeny Linux Systems.
+.SH "SEE ALSO"
+.BR Xvfb (1x),
+.BR xauth (1x)
+.\" vim:set et tw=80:
More information about the arch-commits
mailing list