[arch-commits] Commit in hostapd/trunk (5 files)
David Runge
dvzrv at archlinux.org
Tue Sep 17 15:38:30 UTC 2019
Date: Tuesday, September 17, 2019 @ 15:38:29
Author: dvzrv
Revision: 510999
upgpkg: hostapd 2.9-2
Adding contributor. Switching to correct license (BSD). Removing non-standard/ not-upstreamed (and undocumented) patches.
Syncing build config with the standard one from version 2.9. Setting state dir and configuration locations in default configuration.
Removing unrequired CFLAGS override. Installing (hopefully) all configurations to /etc/hostapd and adding them to backup array.
Extracting correct license from README and installing it. Installing READMEs and ChangeLog as docs. Building against sqlite for additional functionality.
Using install target to install files instead of manually installing them. Adding PrivateTmp=yes to hostapd.service, so a separate tmp is used for certain actions.
Modified:
hostapd/trunk/PKGBUILD
hostapd/trunk/config
hostapd/trunk/hostapd.service
Deleted:
hostapd/trunk/hostapd-noscan.patch
hostapd/trunk/openvswitch.patch
----------------------+
PKGBUILD | 94 +++++++-------
config | 319 ++++++++++++++++++++++++++++++++++++++++++++++---
hostapd-noscan.patch | 76 -----------
hostapd.service | 1
openvswitch.patch | 137 ---------------------
5 files changed, 350 insertions(+), 277 deletions(-)
Modified: PKGBUILD
===================================================================
--- PKGBUILD 2019-09-17 14:03:07 UTC (rev 510998)
+++ PKGBUILD 2019-09-17 15:38:29 UTC (rev 510999)
@@ -1,70 +1,68 @@
# Maintainer: Sergej Pupykin <pupykin.s+arch at gmail.com>
+# Contributor: David Runge <dave at sleepmap.de>
pkgname=hostapd
pkgver=2.9
-pkgrel=1
+pkgrel=2
pkgdesc="IEEE 802.11 AP, IEEE 802.1X/WPA/WPA2/EAP/RADIUS Authenticator"
arch=('x86_64')
url="https://w1.fi/hostapd/"
-license=(GPL)
-depends=('openssl' 'libnl')
-options=(emptydirs)
-validpgpkeys=('EC4AA0A991A5F2464582D52D2B6EF432EFC895FA') # Jouni Malinen
-source=(https://w1.fi/releases/$pkgname-$pkgver.tar.gz{,.asc}
+license=('BSD')
+depends=('glibc' 'libnl' 'openssl' 'sqlite')
+backup=("etc/${pkgname}/${pkgname}."{accept,conf,deny,eap_user,radius_clients,vlan,wpa_psk})
+source=("https://w1.fi/releases/$pkgname-$pkgver.tar.gz"{,.asc}
config
- hostapd.service
- hostapd-noscan.patch
- openvswitch.patch)
+ hostapd.service)
sha256sums=('881d7d6a90b2428479288d64233151448f8990ab4958e0ecaca7eeb3c9db2bd7'
'SKIP'
- '15c116def37d99d02bc46c05d031c12ee00064bbb4b4c8df0e43eb227ff6aafc'
- '989bc6855f44c0b360e3d4cd4a146c35b7c12f8a0ced627b4b033f58edcade8e'
- '5ad1aadcd7682e517cab6afb474df6b9abad1a08dbe2bb40571a1b91c33f6f09'
- '64c06b5f6f58923446fd9351c596c759dec130997677f8b9f013c8ce360fbd98')
+ '87445203a518864e704b85fa970d90940e9a5d9b401ceb802d11caab6c07a495'
+ 'd9a8b44915ed71211f27533b9b075e22423d2fab27013f5ca89f1eec150459b2')
+validpgpkeys=('EC4AA0A991A5F2464582D52D2B6EF432EFC895FA') # Jouni Malinen
prepare() {
- cd $pkgname-$pkgver
- local i; for i in "${source[@]}"; do
- case $i in
- *.patch)
- msg2 "Applying patch $i"
- patch -p1 -i "$srcdir/$i"
- ;;
- esac
- done
+ cd "$pkgname-$pkgver"
+ # fix include locations in main configuration file
+ sed -e 's|/etc/hostapd|/etc/hostapd/hostapd|g' \
+ -e 's|/var/run|/run|g' \
+ -e 's|radius_attr.sqlite|/var/lib/hostapd/radius_attr.sqlite|g' \
+ -e 's|hostapd.cred|/var/lib/hostapd/hostapd.cred|g' \
+ -e 's|hostapd.ap_settings|/var/lib/hostapd/hostapd.ap_settings|g' \
+ -e 's|hostapd_wps_pin_requests|hostapd/wps_pin_requests|g' \
+ -i "${pkgname}/${pkgname}.conf"
+ # extract license
+ cat "${pkgname}/README" |head -n47 |tail -n5 > LICENSE
+ # link build configuration into place:
+ # an up-to-date version of the build configuration can be found in
+ # hostapd/defconfig and should be diffed with the packaged one before every
+ # build
+ ln -sv "${srcdir}/config" "${pkgname}/.config"
}
build() {
cd $pkgname-$pkgver/hostapd
- cp ../../config .config
- sed -i 's#/etc/hostapd#/etc/hostapd/hostapd#' hostapd.conf
- export CFLAGS="$CFLAGS $(pkg-config --cflags libnl-3.0)"
make
}
package() {
- # Systemd unit
- install -Dm644 hostapd.service "$pkgdir/usr/lib/systemd/system/hostapd.service"
-
- cd $pkgname-$pkgver
-
- # License
- install -Dm644 COPYING "$pkgdir/usr/share/licenses/$pkgname/COPYING"
-
- cd hostapd
-
- # Binaries
- install -d "$pkgdir/usr/bin"
- install -t "$pkgdir/usr/bin" hostapd hostapd_cli
-
- # Configuration
+ cd "$pkgname-$pkgver"
+ make -C "${pkgname}" install DESTDIR="${pkgdir}" BINDIR="/usr/bin"
+ # systemd service
+ install -vDm 644 "../${pkgname}.service" \
+ -t "$pkgdir/usr/lib/systemd/system/"
+ # license
+ install -vDm 644 LICENSE -t "$pkgdir/usr/share/licenses/$pkgname/"
+ # config
install -d "$pkgdir/etc/hostapd"
- install -d "$pkgdir/usr/share/doc/hostapd"
- install -m644 -t "$pkgdir/usr/share/doc/hostapd" \
- hostapd.{accept,conf,deny,eap_user,radius_clients,sim_db,vlan,wpa_psk} \
- wired.conf hlr_auc_gw.milenage_db
-
- # Man pages
- install -Dm644 hostapd.8 "$pkgdir/usr/share/man/man8/hostapd.8"
- install -Dm644 hostapd_cli.1 "$pkgdir/usr/share/man/man1/hostapd_cli.1"
+ install -vDm 640 "${pkgname}/${pkgname}."{accept,conf,deny,eap_user,radius_clients,vlan,wpa_psk} \
+ -t "${pkgdir}/etc/${pkgname}"
+ # docs
+ install -vDm 644 "${pkgname}/"{hostapd.sim_db,wired.conf,hlr_auc_gw.{txt,milenage_db}} \
+ "${pkgname}/"{README*,ChangeLog} \
+ -t "${pkgdir}/usr/share/doc/${pkgname}"
+ # man pages
+ install -vDm 644 "${pkgname}/${pkgname}.8" -t "$pkgdir/usr/share/man/man8/"
+ install -vDm 644 "${pkgname}/${pkgname}_cli.1" \
+ -t "$pkgdir/usr/share/man/man1/"
+ # state dir
+ install -vdm 750 "${pkgdir}/var/lib/${pkgname}"
}
Modified: config
===================================================================
--- config 2019-09-17 14:03:07 UTC (rev 510998)
+++ config 2019-09-17 15:38:29 UTC (rev 510999)
@@ -15,9 +15,35 @@
# Driver interface for wired authenticator
CONFIG_DRIVER_WIRED=y
-# Driver interface for Prism54 driver
-CONFIG_DRIVER_PRISM54=y
+# Driver interface for drivers using the nl80211 kernel interface
+CONFIG_DRIVER_NL80211=y
+# QCA vendor extensions to nl80211
+#CONFIG_DRIVER_NL80211_QCA=y
+
+# driver_nl80211.c requires libnl. If you are compiling it yourself
+# you may need to point hostapd to your version of libnl.
+#
+#CFLAGS += -I$<path to libnl include files>
+#LIBS += -L$<path to libnl library files>
+
+# Use libnl v2.0 (or 3.0) libraries.
+#CONFIG_LIBNL20=y
+
+# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
+CONFIG_LIBNL32=y
+
+
+# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
+#CONFIG_DRIVER_BSD=y
+#CFLAGS += -I/usr/local/include
+#LIBS += -L/usr/local/lib
+#LIBS_p += -L/usr/local/lib
+#LIBS_c += -L/usr/local/lib
+
+# Driver interface for no driver (e.g., RADIUS server only)
+#CONFIG_DRIVER_NONE=y
+
# IEEE 802.11F/IAPP
CONFIG_IAPP=y
@@ -24,18 +50,18 @@
# WPA2/IEEE 802.11i RSN pre-authentication
CONFIG_RSN_PREAUTH=y
-# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
-CONFIG_PEERKEY=y
-
# IEEE 802.11w (management frame protection)
-# This version is an experimental implementation based on IEEE 802.11w/D1.0
-# draft and is subject to change since the standard has not yet been finalized.
-# Driver support is also needed for IEEE 802.11w.
CONFIG_IEEE80211W=y
+# Support Operating Channel Validation
+#CONFIG_OCV=y
+
# Integrated EAP server
CONFIG_EAP=y
+# EAP Re-authentication Protocol (ERP) in integrated EAP server
+CONFIG_ERP=y
+
# EAP-MD5 for the integrated EAP server
CONFIG_EAP_MD5=y
@@ -60,6 +86,10 @@
# EAP-AKA for the integrated EAP server
CONFIG_EAP_AKA=y
+# EAP-AKA' for the integrated EAP server
+# This requires CONFIG_EAP_AKA to be enabled, too.
+#CONFIG_EAP_AKA_PRIME=y
+
# EAP-PAX for the integrated EAP server
CONFIG_EAP_PAX=y
@@ -66,6 +96,9 @@
# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
CONFIG_EAP_PSK=y
+# EAP-pwd for the integrated EAP server (secure authentication with a password)
+#CONFIG_EAP_PWD=y
+
# EAP-SAKE for the integrated EAP server
CONFIG_EAP_SAKE=y
@@ -74,6 +107,35 @@
# Include support for optional SHA256 cipher suite in EAP-GPSK
CONFIG_EAP_GPSK_SHA256=y
+# EAP-FAST for the integrated EAP server
+#CONFIG_EAP_FAST=y
+
+# EAP-TEAP for the integrated EAP server
+# Note: The current EAP-TEAP implementation is experimental and should not be
+# enabled for production use. The IETF RFC 7170 that defines EAP-TEAP has number
+# of conflicting statements and missing details and the implementation has
+# vendor specific workarounds for those and as such, may not interoperate with
+# any other implementation. This should not be used for anything else than
+# experimentation and interoperability testing until those issues has been
+# resolved.
+#CONFIG_EAP_TEAP=y
+
+# Wi-Fi Protected Setup (WPS)
+CONFIG_WPS=y
+# Enable UPnP support for external WPS Registrars
+CONFIG_WPS_UPNP=y
+# Enable WPS support with NFC config method
+CONFIG_WPS_NFC=y
+
+# EAP-IKEv2
+#CONFIG_EAP_IKEV2=y
+
+# Trusted Network Connect (EAP-TNC)
+#CONFIG_EAP_TNC=y
+
+# EAP-EKE for the integrated EAP server
+#CONFIG_EAP_EKE=y
+
# PKCS#12 (PFX) support (used to read private key and certificate file from
# a file that usually has extension .p12 or .pfx)
CONFIG_PKCS12=y
@@ -85,25 +147,250 @@
# Build IPv6 support for RADIUS operations
CONFIG_IPV6=y
-CONFIG_DRIVER_NL80211=y
+# IEEE Std 802.11r-2008 (Fast BSS Transition)
+CONFIG_IEEE80211R=y
+# Use the hostapd's IEEE 802.11 authentication (ACL), but without
+# the IEEE 802.11 Management capability (e.g., FreeBSD/net80211)
+#CONFIG_DRIVER_RADIUS_ACL=y
+
+# IEEE 802.11n (High Throughput) support
CONFIG_IEEE80211N=y
-CONFIG_LIBNL32=y
+# Wireless Network Management (IEEE Std 802.11v-2011)
+# Note: This is experimental and not complete implementation.
+#CONFIG_WNM=y
+# IEEE 802.11ac (Very High Throughput) support
+CONFIG_IEEE80211AC=y
+
+# IEEE 802.11ax HE support
+# Note: This is experimental and work in progress. The definitions are still
+# subject to change and this should not be expected to interoperate with the
+# final IEEE 802.11ax version.
+#CONFIG_IEEE80211AX=y
+
+# Remove debugging code that is printing out debug messages to stdout.
+# This can be used to reduce the size of the hostapd considerably if debugging
+# code is not needed.
+#CONFIG_NO_STDOUT_DEBUG=y
+
+# Add support for writing debug log to a file: -f /tmp/hostapd.log
+# Disabled by default.
+#CONFIG_DEBUG_FILE=y
+
+# Send debug messages to syslog instead of stdout
+#CONFIG_DEBUG_SYSLOG=y
+
+# Add support for sending all debug messages (regardless of debug verbosity)
+# to the Linux kernel tracing facility. This helps debug the entire stack by
+# making it easy to record everything happening from the driver up into the
+# same file, e.g., using trace-cmd.
+#CONFIG_DEBUG_LINUX_TRACING=y
+
+# Remove support for RADIUS accounting
+#CONFIG_NO_ACCOUNTING=y
+
+# Remove support for RADIUS
+#CONFIG_NO_RADIUS=y
+
+# Remove support for VLANs
+#CONFIG_NO_VLAN=y
+
+# Enable support for fully dynamic VLANs. This enables hostapd to
+# automatically create bridge and VLAN interfaces if necessary.
+#CONFIG_FULL_DYNAMIC_VLAN=y
+
+# Use netlink-based kernel API for VLAN operations instead of ioctl()
+# Note: This requires libnl 3.1 or newer.
+#CONFIG_VLAN_NETLINK=y
+
+# Remove support for dumping internal state through control interface commands
+# This can be used to reduce binary size at the cost of disabling a debugging
+# option.
+#CONFIG_NO_DUMP_STATE=y
+
+# Enable tracing code for developer debugging
+# This tracks use of memory allocations and other registrations and reports
+# incorrect use with a backtrace of call (or allocation) location.
+#CONFIG_WPA_TRACE=y
+# For BSD, comment out these.
+#LIBS += -lexecinfo
+#LIBS_p += -lexecinfo
+#LIBS_c += -lexecinfo
+
+# Use libbfd to get more details for developer debugging
+# This enables use of libbfd to get more detailed symbols for the backtraces
+# generated by CONFIG_WPA_TRACE=y.
+#CONFIG_WPA_TRACE_BFD=y
+# For BSD, comment out these.
+#LIBS += -lbfd -liberty -lz
+#LIBS_p += -lbfd -liberty -lz
+#LIBS_c += -lbfd -liberty -lz
+
+# hostapd depends on strong random number generation being available from the
+# operating system. os_get_random() function is used to fetch random data when
+# needed, e.g., for key generation. On Linux and BSD systems, this works by
+# reading /dev/urandom. It should be noted that the OS entropy pool needs to be
+# properly initialized before hostapd is started. This is important especially
+# on embedded devices that do not have a hardware random number generator and
+# may by default start up with minimal entropy available for random number
+# generation.
+#
+# As a safety net, hostapd is by default trying to internally collect
+# additional entropy for generating random data to mix in with the data
+# fetched from the OS. This by itself is not considered to be very strong, but
+# it may help in cases where the system pool is not initialized properly.
+# However, it is very strongly recommended that the system pool is initialized
+# with enough entropy either by using hardware assisted random number
+# generator or by storing state over device reboots.
+#
+# hostapd can be configured to maintain its own entropy store over restarts to
+# enhance random number generation. This is not perfect, but it is much more
+# secure than using the same sequence of random numbers after every reboot.
+# This can be enabled with -e<entropy file> command line option. The specified
+# file needs to be readable and writable by hostapd.
+#
+# If the os_get_random() is known to provide strong random data (e.g., on
+# Linux/BSD, the board in question is known to have reliable source of random
+# data from /dev/urandom), the internal hostapd random pool can be disabled.
+# This will save some in binary size and CPU use. However, this should only be
+# considered for builds that are known to be used on devices that meet the
+# requirements described above.
+#CONFIG_NO_RANDOM_POOL=y
+
+# Should we attempt to use the getrandom(2) call that provides more reliable
+# yet secure randomness source than /dev/random on Linux 3.17 and newer.
+# Requires glibc 2.25 to build, falls back to /dev/random if unavailable.
+#CONFIG_GETRANDOM=y
+
+# Should we use poll instead of select? Select is used by default.
+#CONFIG_ELOOP_POLL=y
+
+# Should we use epoll instead of select? Select is used by default.
+#CONFIG_ELOOP_EPOLL=y
+
+# Should we use kqueue instead of select? Select is used by default.
+#CONFIG_ELOOP_KQUEUE=y
+
+# Select TLS implementation
+# openssl = OpenSSL (default)
+# gnutls = GnuTLS
+# internal = Internal TLSv1 implementation (experimental)
+# linux = Linux kernel AF_ALG and internal TLSv1 implementation (experimental)
+# none = Empty template
+#CONFIG_TLS=openssl
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
+# can be enabled to get a stronger construction of messages when block ciphers
+# are used.
+#CONFIG_TLSV11=y
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
+# can be enabled to enable use of stronger crypto algorithms.
+#CONFIG_TLSV12=y
+
+# Select which ciphers to use by default with OpenSSL if the user does not
+# specify them.
+#CONFIG_TLS_DEFAULT_CIPHERS="DEFAULT:!EXP:!LOW"
+
+# If CONFIG_TLS=internal is used, additional library and include paths are
+# needed for LibTomMath. Alternatively, an integrated, minimal version of
+# LibTomMath can be used. See beginning of libtommath.c for details on benefits
+# and drawbacks of this option.
+#CONFIG_INTERNAL_LIBTOMMATH=y
+#ifndef CONFIG_INTERNAL_LIBTOMMATH
+#LTM_PATH=/usr/src/libtommath-0.39
+#CFLAGS += -I$(LTM_PATH)
+#LIBS += -L$(LTM_PATH)
+#LIBS_p += -L$(LTM_PATH)
+#endif
+# At the cost of about 4 kB of additional binary size, the internal LibTomMath
+# can be configured to include faster routines for exptmod, sqr, and div to
+# speed up DH and RSA calculation considerably
+#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
+
+# Interworking (IEEE 802.11u)
+# This can be used to enable functionality to improve interworking with
+# external networks.
+#CONFIG_INTERWORKING=y
+
+# Hotspot 2.0
+#CONFIG_HS20=y
+
+# Enable SQLite database support in hlr_auc_gw, EAP-SIM DB, and eap_user_file
+CONFIG_SQLITE=y
+
+# Enable Fast Session Transfer (FST)
+#CONFIG_FST=y
+
+# Enable CLI commands for FST testing
+#CONFIG_FST_TEST=y
+
+# Testing options
+# This can be used to enable some testing options (see also the example
+# configuration file) that are really useful only for testing clients that
+# connect to this hostapd. These options allow, for example, to drop a
+# certain percentage of probe requests or auth/(re)assoc frames.
+#
+#CONFIG_TESTING_OPTIONS=y
+
+# Automatic Channel Selection
+# This will allow hostapd to pick the channel automatically when channel is set
+# to "acs_survey" or "0". Eventually, other ACS algorithms can be added in
+# similar way.
+#
+# Automatic selection is currently only done through initialization, later on
+# we hope to do background checks to keep us moving to more ideal channels as
+# time goes by. ACS is currently only supported through the nl80211 driver and
+# your driver must have survey dump capability that is filled by the driver
+# during scanning.
+#
+# You can customize the ACS survey algorithm with the hostapd.conf variable
+# acs_num_scans.
+#
+# Supported ACS drivers:
+# * ath9k
+# * ath5k
+# * ath10k
+#
+# For more details refer to:
+# http://wireless.kernel.org/en/users/Documentation/acs
+#
CONFIG_ACS=y
-CONFIG_IEEE80211AC=y
+# Multiband Operation support
+# These extentions facilitate efficient use of multiple frequency bands
+# available to the AP and the devices that may associate with it.
+#CONFIG_MBO=y
-CONFIG_OPENVSWITCH=y
+# Client Taxonomy
+# Has the AP retain the Probe Request and (Re)Association Request frames from
+# a client, from which a signature can be produced which can identify the model
+# of client device like "Nexus 6P" or "iPhone 5s".
+#CONFIG_TAXONOMY=y
-CONFIG_IEEE80211R=y
+# Fast Initial Link Setup (FILS) (IEEE 802.11ai)
+#CONFIG_FILS=y
+# FILS shared key authentication with PFS
+#CONFIG_FILS_SK_PFS=y
-CONFIG_WPS=y
+# Include internal line edit mode in hostapd_cli. This can be used to provide
+# limited command line editing and history support.
+#CONFIG_WPA_CLI_EDIT=y
-CONFIG_WPS2=y
+# Opportunistic Wireless Encryption (OWE)
+# Experimental implementation of draft-harkins-owe-07.txt
+#CONFIG_OWE=y
-CONFIG_WPS_UPNP=y
+# Airtime policy support
+#CONFIG_AIRTIME_POLICY=y
+# Override default value for the wpa_disable_eapol_key_retries configuration
+# parameter. See that parameter in hostapd.conf for more details.
+#CFLAGS += -DDEFAULT_WPA_DISABLE_EAPOL_KEY_RETRIES=1
+
+# custom configuration options
CONFIG_MESH=y
CONFIG_SAE=y
+CONFIG_WPS2=y
Deleted: hostapd-noscan.patch
===================================================================
--- hostapd-noscan.patch 2019-09-17 14:03:07 UTC (rev 510998)
+++ hostapd-noscan.patch 2019-09-17 15:38:29 UTC (rev 510999)
@@ -1,76 +0,0 @@
-diff -wbBur hostapd-2.8/hostapd/config_file.c hostapd-2.8.q/hostapd/config_file.c
---- hostapd-2.8/hostapd/config_file.c 2019-04-21 10:10:22.000000000 +0300
-+++ hostapd-2.8.q/hostapd/config_file.c 2019-04-25 14:59:57.594749041 +0300
-@@ -2858,6 +2858,8 @@
- bss->wpa_gmk_rekey = atoi(pos);
- } else if (os_strcmp(buf, "wpa_ptk_rekey") == 0) {
- bss->wpa_ptk_rekey = atoi(pos);
-+ } else if (os_strcmp(buf, "noscan") == 0) {
-+ conf->noscan = atoi(pos);
- } else if (os_strcmp(buf, "wpa_group_update_count") == 0) {
- char *endp;
- unsigned long val = strtoul(pos, &endp, 0);
-@@ -3390,6 +3392,8 @@
- bss->ieee80211w = 1;
- #endif /* CONFIG_OCV */
- #ifdef CONFIG_IEEE80211N
-+ } else if (os_strcmp(buf, "noscan") == 0) {
-+ conf->noscan = atoi(pos);
- } else if (os_strcmp(buf, "ieee80211n") == 0) {
- conf->ieee80211n = atoi(pos);
- } else if (os_strcmp(buf, "ht_capab") == 0) {
-diff -wbBur hostapd-2.8/src/ap/ap_config.h hostapd-2.8.q/src/ap/ap_config.h
---- hostapd-2.8/src/ap/ap_config.h 2019-04-21 10:10:22.000000000 +0300
-+++ hostapd-2.8.q/src/ap/ap_config.h 2019-04-25 15:01:32.981414600 +0300
-@@ -801,6 +801,7 @@
-
- int ht_op_mode_fixed;
- u16 ht_capab;
-+ int noscan;
- int ieee80211n;
- int secondary_channel;
- int no_pri_sec_switch;
-diff -wbBur hostapd-2.8/src/ap/hw_features.c hostapd-2.8.q/src/ap/hw_features.c
---- hostapd-2.8/src/ap/hw_features.c 2019-04-21 10:10:22.000000000 +0300
-+++ hostapd-2.8.q/src/ap/hw_features.c 2019-04-25 14:58:10.278083605 +0300
-@@ -477,7 +477,7 @@
- int ret;
-
- /* Check that HT40 is used and PRI / SEC switch is allowed */
-- if (!iface->conf->secondary_channel || iface->conf->no_pri_sec_switch)
-+ if (!iface->conf->secondary_channel || iface->conf->no_pri_sec_switch || iface->conf->noscan)
- return 0;
-
- hostapd_set_state(iface, HAPD_IFACE_HT_SCAN);
-@@ -730,7 +730,7 @@
- if (!hostapd_is_usable_chan(iface, iface->conf->channel, 1))
- return 0;
-
-- if (!iface->conf->secondary_channel)
-+ if (!iface->conf->secondary_channel || iface->conf->noscan)
- return 1;
-
- if (!iface->conf->ht40_plus_minus_allowed)
-diff -wbBur hostapd-2.8/src/ap/ieee802_11_ht.c hostapd-2.8.q/src/ap/ieee802_11_ht.c
---- hostapd-2.8/src/ap/ieee802_11_ht.c 2019-04-21 10:10:22.000000000 +0300
-+++ hostapd-2.8.q/src/ap/ieee802_11_ht.c 2019-04-25 14:58:10.278083605 +0300
-@@ -252,6 +252,9 @@
- return;
- }
-
-+ if (iface->conf->noscan)
-+ return;
-+
- if (len < IEEE80211_HDRLEN + 2 + sizeof(*bc_ie)) {
- wpa_printf(MSG_DEBUG,
- "Ignore too short 20/40 BSS Coexistence Management frame");
-@@ -412,6 +415,9 @@
- if (iface->current_mode->mode != HOSTAPD_MODE_IEEE80211G)
- return;
-
-+ if (iface->conf->noscan)
-+ return;
-+
- wpa_printf(MSG_INFO, "HT: Forty MHz Intolerant is set by STA " MACSTR
- " in Association Request", MAC2STR(sta->addr));
-
Modified: hostapd.service
===================================================================
--- hostapd.service 2019-09-17 14:03:07 UTC (rev 510998)
+++ hostapd.service 2019-09-17 15:38:29 UTC (rev 510999)
@@ -5,6 +5,7 @@
[Service]
ExecStart=/usr/bin/hostapd /etc/hostapd/hostapd.conf
ExecReload=/bin/kill -HUP $MAINPID
+PrivateTmp=yes
[Install]
WantedBy=multi-user.target
Deleted: openvswitch.patch
===================================================================
--- openvswitch.patch 2019-09-17 14:03:07 UTC (rev 510998)
+++ openvswitch.patch 2019-09-17 15:38:29 UTC (rev 510999)
@@ -1,137 +0,0 @@
-diff -wbBur hostapd-2.8.q/src/drivers/drivers.mak hostapd-2.8/src/drivers/drivers.mak
---- hostapd-2.8.q/src/drivers/drivers.mak 2019-04-21 10:10:22.000000000 +0300
-+++ hostapd-2.8/src/drivers/drivers.mak 2019-04-25 15:05:36.981411804 +0300
-@@ -136,6 +136,10 @@
- NEED_RFKILL=y
- endif
-
-+ifdef CONFIG_OPENVSWITCH
-+DRV_CFLAGS += -DCONFIG_OPENVSWITCH
-+endif
-+
- ifdef NEED_NETLINK
- DRV_OBJS += ../src/drivers/netlink.o
- endif
-diff -wbBur hostapd-2.8.q/src/drivers/drivers.mk hostapd-2.8/src/drivers/drivers.mk
---- hostapd-2.8.q/src/drivers/drivers.mk 2019-04-21 10:10:22.000000000 +0300
-+++ hostapd-2.8/src/drivers/drivers.mk 2019-04-25 15:05:36.981411804 +0300
-@@ -128,6 +128,10 @@
- NEED_RFKILL=y
- endif
-
-+ifdef CONFIG_OPENVSWITCH
-+DRV_CFLAGS += -DCONFIG_OPENVSWITCH
-+endif
-+
- ifdef NEED_NETLINK
- DRV_OBJS += src/drivers/netlink.c
- endif
-diff -wbBur hostapd-2.8.q/src/drivers/linux_ioctl.c hostapd-2.8/src/drivers/linux_ioctl.c
---- hostapd-2.8.q/src/drivers/linux_ioctl.c 2019-04-21 10:10:22.000000000 +0300
-+++ hostapd-2.8/src/drivers/linux_ioctl.c 2019-04-25 15:05:36.981411804 +0300
-@@ -15,6 +15,69 @@
- #include "common/linux_bridge.h"
- #include "linux_ioctl.h"
-
-+#ifdef CONFIG_OPENVSWITCH
-+#include <sys/wait.h>
-+#include <sys/stat.h>
-+
-+#define run_prog(p, ...) ({ \
-+ struct stat q; \
-+ int rc = -1, status; \
-+ if(stat(p, &q) == 0) \
-+ { \
-+ pid_t pid = fork(); \
-+ if (!pid) \
-+ exit(execl(p, p, ##__VA_ARGS__, NULL)); \
-+ if (pid < 0) { \
-+ rc = -1; \
-+ } else { \
-+ while ((rc = waitpid(pid, &status, 0)) == -1 && errno == EINTR); \
-+ rc = (rc == pid && WIFEXITED(status)) ? WEXITSTATUS(status) : -1; \
-+ } \
-+ } \
-+ rc; \
-+})
-+
-+int ovs_br_get(char *brname, const char *ifname)
-+{
-+ FILE *f;
-+ char cmd[64];
-+ char *c;
-+ struct stat q;
-+
-+ if(stat("/usr/bin/ovs-vsctl", &q) != 0)
-+ return -1;
-+
-+ brname[0] = '\0';
-+ sprintf(cmd, "/usr/bin/ovs-vsctl iface-to-br %s", ifname);
-+ f = popen(cmd, "r");
-+ if (!f)
-+ return -1;
-+ c = fgets(brname, IFNAMSIZ, f);
-+ pclose(f);
-+ if (c && strlen(brname)) {
-+ /* Ignore newline */
-+ if ((c = strchr(brname, '\n')))
-+ *c = '\0';
-+ return 0;
-+ }
-+ return -1;
-+}
-+
-+int ovs_br_add_if(const char *brname, const char *ifname)
-+{
-+ if (run_prog("/usr/bin/ovs-vsctl", "add-port", brname, ifname))
-+ return -1;
-+ return 0;
-+}
-+
-+int ovs_br_del_if(const char *brname, const char *ifname)
-+{
-+ if (run_prog("/usr/bin/ovs-vsctl", "del-port", brname, ifname))
-+ return -1;
-+ return 0;
-+}
-+
-+#endif
-
- int linux_set_iface_flags(int sock, const char *ifname, int dev_up)
- {
-@@ -152,6 +215,11 @@
- struct ifreq ifr;
- int ifindex;
-
-+#ifdef CONFIG_OPENVSWITCH
-+ if (!ovs_br_add_if(brname, ifname))
-+ return 0;
-+#endif
-+
- ifindex = if_nametoindex(ifname);
- if (ifindex == 0)
- return -1;
-@@ -177,6 +245,11 @@
- struct ifreq ifr;
- int ifindex;
-
-+#ifdef CONFIG_OPENVSWITCH
-+ if (!ovs_br_del_if(brname, ifname))
-+ return 0;
-+#endif
-+
- ifindex = if_nametoindex(ifname);
- if (ifindex == 0)
- return -1;
-@@ -199,6 +272,11 @@
- char path[128], brlink[128], *pos;
- ssize_t res;
-
-+#ifdef CONFIG_OPENVSWITCH
-+ if (!ovs_br_get(brname, ifname))
-+ return 0;
-+#endif
-+
- os_snprintf(path, sizeof(path), "/sys/class/net/%s/brport/bridge",
- ifname);
- res = readlink(path, brlink, sizeof(brlink));
More information about the arch-commits
mailing list