[arch-commits] Commit in texlive-core/repos/extra-any (28 files)

Rémy Oudompheng remy at archlinux.org
Sun Dec 6 09:56:49 UTC 2020


    Date: Sunday, December 6, 2020 @ 09:56:49
  Author: remy
Revision: 402922

archrelease: copy trunk to extra-any

Added:
  texlive-core/repos/extra-any/09-texlive-fonts.conf
    (from rev 402921, texlive-core/trunk/09-texlive-fonts.conf)
  texlive-core/repos/extra-any/Changelog
    (from rev 402921, texlive-core/trunk/Changelog)
  texlive-core/repos/extra-any/PKGBUILD
    (from rev 402921, texlive-core/trunk/PKGBUILD)
  texlive-core/repos/extra-any/mktexlsr.hook
    (from rev 402921, texlive-core/trunk/mktexlsr.hook)
  texlive-core/repos/extra-any/mktexlsr.script
    (from rev 402921, texlive-core/trunk/mktexlsr.script)
  texlive-core/repos/extra-any/texlive-core.fmts
    (from rev 402921, texlive-core/trunk/texlive-core.fmts)
  texlive-core/repos/extra-any/texlive-core.maps
    (from rev 402921, texlive-core/trunk/texlive-core.maps)
  texlive-core/repos/extra-any/texlive-fmtutil.hook
    (from rev 402921, texlive-core/trunk/texlive-fmtutil.hook)
  texlive-core/repos/extra-any/texlive-fmtutil.script
    (from rev 402921, texlive-core/trunk/texlive-fmtutil.script)
  texlive-core/repos/extra-any/texlive-updmap.hook
    (from rev 402921, texlive-core/trunk/texlive-updmap.hook)
  texlive-core/repos/extra-any/texlive-updmap.script
    (from rev 402921, texlive-core/trunk/texlive-updmap.script)
  texlive-core/repos/extra-any/texlive.install
    (from rev 402921, texlive-core/trunk/texlive.install)
  texlive-core/repos/extra-any/texmf.cnf
    (from rev 402921, texlive-core/trunk/texmf.cnf)
  texlive-core/repos/extra-any/texmfcnf.lua
    (from rev 402921, texlive-core/trunk/texmfcnf.lua)
Deleted:
  texlive-core/repos/extra-any/09-texlive-fonts.conf
  texlive-core/repos/extra-any/Changelog
  texlive-core/repos/extra-any/PKGBUILD
  texlive-core/repos/extra-any/mktexlsr.hook
  texlive-core/repos/extra-any/mktexlsr.script
  texlive-core/repos/extra-any/texlive-core.fmts
  texlive-core/repos/extra-any/texlive-core.maps
  texlive-core/repos/extra-any/texlive-fmtutil.hook
  texlive-core/repos/extra-any/texlive-fmtutil.script
  texlive-core/repos/extra-any/texlive-updmap.hook
  texlive-core/repos/extra-any/texlive-updmap.script
  texlive-core/repos/extra-any/texlive.install
  texlive-core/repos/extra-any/texmf.cnf
  texlive-core/repos/extra-any/texmfcnf.lua

------------------------+
 Changelog              |  752 ++++++++++-----------
 PKGBUILD               |  654 +++++++++---------
 mktexlsr.hook          |   32 
 mktexlsr.script        |   24 
 texlive-core.fmts      |   70 -
 texlive-core.maps      |  121 +--
 texlive-fmtutil.hook   |   36 -
 texlive-fmtutil.script |   38 -
 texlive-updmap.hook    |   26 
 texlive-updmap.script  |   30 
 texlive.install        |   24 
 texmf.cnf              | 1646 +++++++++++++++++++++++------------------------
 texmfcnf.lua           |  380 +++++-----
 13 files changed, 1917 insertions(+), 1916 deletions(-)

Deleted: 09-texlive-fonts.conf
===================================================================
(Binary files differ)

Copied: texlive-core/repos/extra-any/09-texlive-fonts.conf (from rev 402921, texlive-core/trunk/09-texlive-fonts.conf)
===================================================================
(Binary files differ)

Deleted: Changelog
===================================================================
--- Changelog	2020-12-06 09:56:42 UTC (rev 402921)
+++ Changelog	2020-12-06 09:56:49 UTC (rev 402922)
@@ -1,376 +0,0 @@
-texlive-core 2012.28273
-
-- new package a2ping
-- new package adhocfilelist
-- new package basque-book
-- upgrade package beamer 26788 -> 28273
-- upgrade package bibleref-french 25516 -> 27098
-- upgrade package bidi 26822 -> 28144
-- new package bropd
-- upgrade package chickenize 26702 -> 27720
-- upgrade package context-filter 26471 -> 27157
-- upgrade package context-gantt 25712 -> 27472
-- upgrade package context-gnuplot 26852 -> 27837
-- upgrade package context-letter 26753 -> 27787
-- upgrade package context-rst 24199 -> 27236
-- upgrade package context-simplefonts 25094 -> 27171
-- upgrade package context-vim 26873 -> 27374
-- upgrade package dvips 26765 -> 28191
-- upgrade package findhyph 26313 -> 28254
-- upgrade package fontinst 26689 -> 27335
-- upgrade package fontools 25995 -> 28093
-- upgrade package genmisc 20683 -> 27208
-- upgrade package helvetic 21993 -> 28007
-- upgrade package hyperref 26331 -> 28213
-- upgrade package interpreter 24740 -> 27232
-- upgrade package isomath 21296 -> 27654
-- upgrade package koma-script 26455 -> 27255
-- upgrade package l3experimental 26109 -> 27900
-- upgrade package l3kernel 26111 -> 27898
-- upgrade package l3packages 26110 -> 27899
-- upgrade package latex 23639 -> 27907
-- upgrade package latexmk 26313 -> 28264
-- new package latexpand
-- upgrade package lm 23165 -> 28119
-- new package lm-math
-- new package lua-check-hyphen
-- new package lua2dox
-- upgrade package lualatex-math 24009 -> 28101
-- new package luaxml
-- upgrade package mf2pt1 25811 -> 27032
-- upgrade package mpgraphics 22142 -> 27230
-- new package odsfile
-- upgrade package pdfcrop 26313 -> 28175
-- upgrade package pdfpages 25883 -> 27574
-- new package pdftex
-- new package pdftools
-- new package pstools
-- new package ptext
-- upgrade package rec-thy 20909 -> 27225
-- upgrade package sty2dtx 26313 -> 28206
-- upgrade package tetex 26892 -> 28191
-- upgrade package tex-gyre-math 26838 -> 28081
-- upgrade package texdoc 26780 -> 27321
-- upgrade package texinfo 26886 -> 28224
-- upgrade package typeoutfileinfo 26313 -> 27846
-- new package ucharclasses
-- upgrade package unicode-math 26720 -> 27257
-- upgrade package xecjk 26553 -> 28115
-- upgrade package xepersian 26823 -> 28145
-- upgrade package xkeyval 15878 -> 27995
-- upgrade package ytableau 21264 -> 27430
-- deleted package luapersian
-
-texlive-core 2012.26892
-
-- TEXLive 2012 release.
-
-texlive-core 2011.24722
-
-- upgrade package amscls 22145 -> 23392
-- upgrade package amsmath 22147 -> 23390
-- upgrade package babel 22149 -> 23397
-- upgrade package beamer 19443 -> 24067
-- upgrade package bibleref-french 22077 -> 24267
-- upgrade package bidi 22125 -> 24680
-- upgrade package caption 16715 -> 24571
-- upgrade package cmarrows 15878 -> 24378
-- upgrade package context 23169 -> 24174
-- upgrade package context-filter 23170 -> 24389
-- upgrade package context-french 23167 -> 24582
-- new package context-gantt
-- upgrade package context-gnuplot 23167 -> 24028
-- upgrade package context-letter 23167 -> 24045
-- upgrade package context-rst 23167 -> 24199
-- upgrade package context-simplefonts 23167 -> 23369
-- upgrade package context-simpleslides 23167 -> 24165
-- upgrade package context-typescripts 23167 -> 24492
-- upgrade package context-vim 23167 -> 24359
-- upgrade package cslatex 22650 -> 23409
-- upgrade package ctable 22269 -> 23834
-- new package ctanify
-- new package ctanupload
-- upgrade package dehyph-exptl 18640 -> 23403
-- new package dhua
-- upgrade package dvips 23089 -> 24563
-- upgrade package emp 15878 -> 23483
-- new package facture
-- new package fontbook
-- upgrade package fontname 23088 -> 24661
-- upgrade package fontools 20048 -> 23329
-- upgrade package fontspec 21527 -> 24114
-- upgrade package frontespizio 21648 -> 24054
-- upgrade package graphics 22151 -> 23395
-- upgrade package hatching 18486 -> 23818
-- upgrade package hyperref 22110 -> 24686
-- upgrade package hyph-utf8 23085 -> 24089
-- new package impnattypo
-- upgrade package index 15878 -> 24099
-Upgrading package texlive-core from 23170 to 24722
-- upgrade package amscls 22145 -> 23392
-- upgrade package amsmath 22147 -> 23390
-- upgrade package babel 22149 -> 23397
-- upgrade package beamer 19443 -> 24067
-- upgrade package bibleref-french 22077 -> 24267
-- upgrade package bidi 22125 -> 24680
-- upgrade package caption 16715 -> 24571
-- upgrade package cmarrows 15878 -> 24378
-- upgrade package context 23169 -> 24174
-- upgrade package context-filter 23170 -> 24389
-- upgrade package context-french 23167 -> 24582
-- new package context-gantt
-- upgrade package context-gnuplot 23167 -> 24028
-- upgrade package context-letter 23167 -> 24045
-- upgrade package context-rst 23167 -> 24199
-- upgrade package context-simplefonts 23167 -> 23369
-- upgrade package context-simpleslides 23167 -> 24165
-- upgrade package context-typescripts 23167 -> 24492
-- upgrade package context-vim 23167 -> 24359
-- upgrade package cslatex 22650 -> 23409
-- upgrade package ctable 22269 -> 23834
-- new package ctanify
-- new package ctanupload
-- upgrade package dehyph-exptl 18640 -> 23403
-- new package dhua
-- upgrade package dvips 23089 -> 24563
-- upgrade package emp 15878 -> 23483
-- new package facture
-- new package fontbook
-- upgrade package fontname 23088 -> 24661
-- upgrade package fontools 20048 -> 23329
-- upgrade package fontspec 21527 -> 24114
-- upgrade package frontespizio 21648 -> 24054
-- upgrade package graphics 22151 -> 23395
-- upgrade package hatching 18486 -> 23818
-- upgrade package hyperref 22110 -> 24686
-- upgrade package hyph-utf8 23085 -> 24089
-- new package impnattypo
-- upgrade package index 15878 -> 24099
-- new package interpreter
-- upgrade package ionumbers 15878 -> 23380
-- upgrade package koma-script 21983 -> 23235
-- new package l3experimental
-- new package l3kernel
-- new package l3packages
-- upgrade package latex 22152 -> 23639
-- upgrade package latexmk 22466 -> 24722
-- new package luabibentry
-- new package luaindex
-- upgrade package lualatex-math 22339 -> 24009
-- new package luapersian
-- upgrade package marvosym 22202 -> 23630
-- new package match_parens
-- new package mf2pt1
-- upgrade package mh 21405 -> 23333
-- upgrade package misc 17497 -> 23699
-- new package mpcolornames
-- upgrade package ms 16596 -> 24467
-- upgrade package pdfcrop 19781 -> 23499
-- upgrade package pdfpages 21680 -> 23319
-- upgrade package polyglossia 19698 -> 24291
-- upgrade package powerdot 22510 -> 24587
-- new package przechlewski-book
-- upgrade package psnfss 22153 -> 23394
-- new package showhyphens
-- upgrade package statex2 20307 -> 23961
-- upgrade package tabvar 21678 -> 23278
-- upgrade package texcount 18835 -> 23293
-- upgrade package texdef 22049 -> 23260
-- upgrade package texdoc 23089 -> 24354
-- upgrade package texinfo 22646 -> 24108
-- new package texliveonfly
-- upgrade package thumbpdf 23089 -> 23503
-- upgrade package tools 22154 -> 24253
-- upgrade package unicode-math 21391 -> 24022
-- upgrade package xecjk 22487 -> 23994
-- new package xecolor
-- upgrade package xepersian 21397 -> 24687
-- upgrade package xetex 18937 -> 24091
-- upgrade package xetex-itrans 20757 -> 24105
-- upgrade package xunicode 20553 -> 23897
-- deleted package expl3
-- deleted package xecolour
-- deleted package xetex-devanagari
-- deleted package xpackages
-
-texlive-core 2011.23170
-
-- upgrade package amstex 22650 -> 23089
-- upgrade package bibtex 22198 -> 23089
-- upgrade package context 22719 -> 23169
-- upgrade package context-account 16837 -> 23167
-- upgrade package context-algorithmic 15878 -> 23167
-- upgrade package context-bnf 15878 -> 23167
-- upgrade package context-chromato 15878 -> 23167
-- upgrade package context-construction-plan 15878 -> 23167
-- upgrade package context-degrade 15878 -> 23167
-- upgrade package context-filter 21636 -> 23170
-- upgrade package context-fixme 16141 -> 23167
-- upgrade package context-french 15878 -> 23167
-- upgrade package context-fullpage 21201 -> 23167
-- upgrade package context-games 15878 -> 23167
-- upgrade package context-gnuplot 21379 -> 23167
-- upgrade package context-letter 21349 -> 23167
-- upgrade package context-lettrine 15878 -> 23167
-- upgrade package context-lilypond 17445 -> 23167
-- upgrade package context-mathsets 21969 -> 23167
-- upgrade package context-rst 22387 -> 23167
-- upgrade package context-ruby 16847 -> 23167
-- upgrade package context-simplefonts 21854 -> 23167
-- upgrade package context-simpleslides 16975 -> 23167
-- upgrade package context-typearea 15878 -> 23167
-- upgrade package context-typescripts 21034 -> 23167
-- upgrade package context-vim 21637 -> 23167
-- upgrade package cweb 22198 -> 23089
-- upgrade package dvips 22534 -> 23089
-- upgrade package fontinst 18835 -> 23089
-- upgrade package fontname 21489 -> 23088
-- upgrade package hyph-utf8 21077 -> 23085
-- upgrade package latexconfig 21697 -> 22998
-- upgrade package lm 18651 -> 23165
-- upgrade package luamplib 20881 -> 23137
-- upgrade package makeindex 21345 -> 23089
-- upgrade package metafont 22646 -> 23089
-- upgrade package metapost 22680 -> 23089
-- upgrade package mfware 22534 -> 23089
-- upgrade package mptopdf 22719 -> 23089
-- upgrade package pkfix-helper 20168 -> 22981
-- new package texdoc
-- upgrade package thumbpdf 19315 -> 23089
-- upgrade package ttfutils 22534 -> 23089
-
-texlive-core 2011.22722
-
-- upgrade package amstex 22089 -> 22650
-- upgrade package bibtex 22089 -> 22198
-- upgrade package bundledoc 18835 -> 22307
-- upgrade package context 21345 -> 22719
-- new package context-rst
-- upgrade package cslatex 18835 -> 22650
-- upgrade package csplain 18835 -> 22650
-- upgrade package ctable 22095 -> 22269
-- upgrade package cweb 22089 -> 22198
-- upgrade package dvips 22035 -> 22534
-- upgrade package etex 22089 -> 22198
-- upgrade package euro 15878 -> 22191
-- upgrade package expl3 21634 -> 22236
-- upgrade package ifluatex 22124 -> 22180
-- upgrade package jmn 15878 -> 22719
-- upgrade package latexmk 22132 -> 22466
-- upgrade package lithuanian 15878 -> 22722
-- upgrade package luacode 20372 -> 22605
-- new package lualatex-math
-- upgrade package luaotfload 21450 -> 22165
-- upgrade package luatexbase 20476 -> 22560
-- upgrade package marvosym 15878 -> 22202
-- upgrade package metafont 22089 -> 22646
-- upgrade package metapost 22106 -> 22680
-- upgrade package mex 18835 -> 22650
-- upgrade package mfware 22089 -> 22534
-- upgrade package mptopdf 18835 -> 22719
-- upgrade package oberdiek 22124 -> 22180
-- upgrade package pdftex-def 21241 -> 22653
-- upgrade package pgf 20236 -> 22614
-- upgrade package pkfix 18835 -> 22168
-- upgrade package powerdot 20970 -> 22510
-- upgrade package texinfo 21803 -> 22646
-- upgrade package ttfutils 18835 -> 22534
-- upgrade package unisugar 21552 -> 22357
-- upgrade package xecjk 21117 -> 22487
-- new package xetex-devanagari
-- upgrade package xpackages 21184 -> 22347
-- deleted package eurofont
-- deleted package eurosans
-- deleted package harvardkyoto
-
-texlive-core 2010.22154-1
-
-- upgrade package amscls 20248 -> 22145
-- upgrade package amsmath 20250 -> 22147
-- upgrade package amstex 18835 -> 22089
-- upgrade package avantgar 15878 -> 21993
-- upgrade package babel 20253 -> 22149
-- new package bibleref-french
-- new package bibleref-german
-- upgrade package bibtex 20729 -> 22089
-- upgrade package bidi 20057 -> 22125
-- upgrade package bookman 15878 -> 21993
-- upgrade package context 20438 -> 21345
-- upgrade package context-filter 20288 -> 21636
-- upgrade package context-fullpage 18021 -> 21201
-- upgrade package context-gnuplot 15878 -> 21379
-- upgrade package context-letter 20359 -> 21349
-- upgrade package context-mathsets 15878 -> 21969
-- upgrade package context-simplefonts 20103 -> 21854
-- upgrade package context-typescripts 19977 -> 21034
-- upgrade package context-vim 15878 -> 21637
-- upgrade package courier 20926 -> 21993
-- upgrade package ctable 20274 -> 22095
-- upgrade package cweb 18835 -> 22089
-- upgrade package drv 20511 -> 21499
-- upgrade package dvips 20950 -> 22035
-- upgrade package epsf 17190 -> 21461
-- upgrade package eso-pic 20020 -> 21515
-- upgrade package etex 16381 -> 22089
-- upgrade package expl3 20793 -> 21634
-- new package fixlatvian
-- upgrade package fontname 20190 -> 21489
-- upgrade package fontspec 20472 -> 21527
-- upgrade package fragmaster 18835 -> 21460
-- upgrade package frontespizio 19139 -> 21648
-- new package gmp
-- upgrade package graphics 20255 -> 22151
-- upgrade package helvetic 20926 -> 21993
-- upgrade package hyperref 20783 -> 22110
-- upgrade package hyph-utf8 19815 -> 21077
-- upgrade package ifluatex 18100 -> 22124
-- upgrade package isomath 19786 -> 21296
-- upgrade package koma-script 19797 -> 21983
-- upgrade package latex 20256 -> 22152
-- upgrade package latexconfig 20663 -> 21697
-- upgrade package latexmk 20887 -> 22132
-- upgrade package ltxmisc 20350 -> 21927
-- upgrade package lualibs 19328 -> 21149
-- upgrade package luaotfload 20475 -> 21450
-- upgrade package makeindex 18835 -> 21345
-- upgrade package memoir 19810 -> 21638
-- upgrade package metafont 18835 -> 22089
-- upgrade package metapost 18835 -> 22106
-- upgrade package mfpic 18920 -> 21800
-- upgrade package mfware 18835 -> 22089
-- upgrade package mh 19794 -> 21405
-- upgrade package mkjobtexmf 20859 -> 21345
-- upgrade package mp3d 15878 -> 21771
-- new package mpgraphics
-- upgrade package ncntrsbk 15878 -> 21993
-- upgrade package oberdiek 18100 -> 22124
-- upgrade package oubraces 17175 -> 21833
-- upgrade package palatino 15878 -> 21993
-- upgrade package path 19866 -> 22045
-- upgrade package pdfpages 20796 -> 21680
-- upgrade package pdftex-def 20593 -> 21241
-- upgrade package powerdot 20649 -> 20970
-- upgrade package psnfss 20257 -> 22153
-- upgrade package ruhyphen 18394 -> 21081
-- upgrade package setspace 15878 -> 21104
-- upgrade package stmaryrd 15878 -> 22027
-- new package sty2dtx
-- upgrade package symbol 15878 -> 21570
-- upgrade package tabvar 19619 -> 21678
-- new package texdef
-- upgrade package texinfo 20918 -> 21803
-- upgrade package times 20926 -> 21993
-- upgrade package tools 20258 -> 22154
-- upgrade package ukrhyph 18396 -> 21081
-- upgrade package ulem 20083 -> 21840
-- upgrade package unicode-math 19934 -> 21391
-- new package unisugar
-- upgrade package xecjk 18848 -> 21117
-- upgrade package xepersian 20681 -> 21397
-- upgrade package xpackages 20954 -> 21184
-- upgrade package ytableau 20357 -> 21264
-- upgrade package zapfchan 15878 -> 21993
-- upgrade package zapfding 15878 -> 21570
-- deleted package circle
-- deleted package citeref
-

Copied: texlive-core/repos/extra-any/Changelog (from rev 402921, texlive-core/trunk/Changelog)
===================================================================
--- Changelog	                        (rev 0)
+++ Changelog	2020-12-06 09:56:49 UTC (rev 402922)
@@ -0,0 +1,376 @@
+texlive-core 2012.28273
+
+- new package a2ping
+- new package adhocfilelist
+- new package basque-book
+- upgrade package beamer 26788 -> 28273
+- upgrade package bibleref-french 25516 -> 27098
+- upgrade package bidi 26822 -> 28144
+- new package bropd
+- upgrade package chickenize 26702 -> 27720
+- upgrade package context-filter 26471 -> 27157
+- upgrade package context-gantt 25712 -> 27472
+- upgrade package context-gnuplot 26852 -> 27837
+- upgrade package context-letter 26753 -> 27787
+- upgrade package context-rst 24199 -> 27236
+- upgrade package context-simplefonts 25094 -> 27171
+- upgrade package context-vim 26873 -> 27374
+- upgrade package dvips 26765 -> 28191
+- upgrade package findhyph 26313 -> 28254
+- upgrade package fontinst 26689 -> 27335
+- upgrade package fontools 25995 -> 28093
+- upgrade package genmisc 20683 -> 27208
+- upgrade package helvetic 21993 -> 28007
+- upgrade package hyperref 26331 -> 28213
+- upgrade package interpreter 24740 -> 27232
+- upgrade package isomath 21296 -> 27654
+- upgrade package koma-script 26455 -> 27255
+- upgrade package l3experimental 26109 -> 27900
+- upgrade package l3kernel 26111 -> 27898
+- upgrade package l3packages 26110 -> 27899
+- upgrade package latex 23639 -> 27907
+- upgrade package latexmk 26313 -> 28264
+- new package latexpand
+- upgrade package lm 23165 -> 28119
+- new package lm-math
+- new package lua-check-hyphen
+- new package lua2dox
+- upgrade package lualatex-math 24009 -> 28101
+- new package luaxml
+- upgrade package mf2pt1 25811 -> 27032
+- upgrade package mpgraphics 22142 -> 27230
+- new package odsfile
+- upgrade package pdfcrop 26313 -> 28175
+- upgrade package pdfpages 25883 -> 27574
+- new package pdftex
+- new package pdftools
+- new package pstools
+- new package ptext
+- upgrade package rec-thy 20909 -> 27225
+- upgrade package sty2dtx 26313 -> 28206
+- upgrade package tetex 26892 -> 28191
+- upgrade package tex-gyre-math 26838 -> 28081
+- upgrade package texdoc 26780 -> 27321
+- upgrade package texinfo 26886 -> 28224
+- upgrade package typeoutfileinfo 26313 -> 27846
+- new package ucharclasses
+- upgrade package unicode-math 26720 -> 27257
+- upgrade package xecjk 26553 -> 28115
+- upgrade package xepersian 26823 -> 28145
+- upgrade package xkeyval 15878 -> 27995
+- upgrade package ytableau 21264 -> 27430
+- deleted package luapersian
+
+texlive-core 2012.26892
+
+- TEXLive 2012 release.
+
+texlive-core 2011.24722
+
+- upgrade package amscls 22145 -> 23392
+- upgrade package amsmath 22147 -> 23390
+- upgrade package babel 22149 -> 23397
+- upgrade package beamer 19443 -> 24067
+- upgrade package bibleref-french 22077 -> 24267
+- upgrade package bidi 22125 -> 24680
+- upgrade package caption 16715 -> 24571
+- upgrade package cmarrows 15878 -> 24378
+- upgrade package context 23169 -> 24174
+- upgrade package context-filter 23170 -> 24389
+- upgrade package context-french 23167 -> 24582
+- new package context-gantt
+- upgrade package context-gnuplot 23167 -> 24028
+- upgrade package context-letter 23167 -> 24045
+- upgrade package context-rst 23167 -> 24199
+- upgrade package context-simplefonts 23167 -> 23369
+- upgrade package context-simpleslides 23167 -> 24165
+- upgrade package context-typescripts 23167 -> 24492
+- upgrade package context-vim 23167 -> 24359
+- upgrade package cslatex 22650 -> 23409
+- upgrade package ctable 22269 -> 23834
+- new package ctanify
+- new package ctanupload
+- upgrade package dehyph-exptl 18640 -> 23403
+- new package dhua
+- upgrade package dvips 23089 -> 24563
+- upgrade package emp 15878 -> 23483
+- new package facture
+- new package fontbook
+- upgrade package fontname 23088 -> 24661
+- upgrade package fontools 20048 -> 23329
+- upgrade package fontspec 21527 -> 24114
+- upgrade package frontespizio 21648 -> 24054
+- upgrade package graphics 22151 -> 23395
+- upgrade package hatching 18486 -> 23818
+- upgrade package hyperref 22110 -> 24686
+- upgrade package hyph-utf8 23085 -> 24089
+- new package impnattypo
+- upgrade package index 15878 -> 24099
+Upgrading package texlive-core from 23170 to 24722
+- upgrade package amscls 22145 -> 23392
+- upgrade package amsmath 22147 -> 23390
+- upgrade package babel 22149 -> 23397
+- upgrade package beamer 19443 -> 24067
+- upgrade package bibleref-french 22077 -> 24267
+- upgrade package bidi 22125 -> 24680
+- upgrade package caption 16715 -> 24571
+- upgrade package cmarrows 15878 -> 24378
+- upgrade package context 23169 -> 24174
+- upgrade package context-filter 23170 -> 24389
+- upgrade package context-french 23167 -> 24582
+- new package context-gantt
+- upgrade package context-gnuplot 23167 -> 24028
+- upgrade package context-letter 23167 -> 24045
+- upgrade package context-rst 23167 -> 24199
+- upgrade package context-simplefonts 23167 -> 23369
+- upgrade package context-simpleslides 23167 -> 24165
+- upgrade package context-typescripts 23167 -> 24492
+- upgrade package context-vim 23167 -> 24359
+- upgrade package cslatex 22650 -> 23409
+- upgrade package ctable 22269 -> 23834
+- new package ctanify
+- new package ctanupload
+- upgrade package dehyph-exptl 18640 -> 23403
+- new package dhua
+- upgrade package dvips 23089 -> 24563
+- upgrade package emp 15878 -> 23483
+- new package facture
+- new package fontbook
+- upgrade package fontname 23088 -> 24661
+- upgrade package fontools 20048 -> 23329
+- upgrade package fontspec 21527 -> 24114
+- upgrade package frontespizio 21648 -> 24054
+- upgrade package graphics 22151 -> 23395
+- upgrade package hatching 18486 -> 23818
+- upgrade package hyperref 22110 -> 24686
+- upgrade package hyph-utf8 23085 -> 24089
+- new package impnattypo
+- upgrade package index 15878 -> 24099
+- new package interpreter
+- upgrade package ionumbers 15878 -> 23380
+- upgrade package koma-script 21983 -> 23235
+- new package l3experimental
+- new package l3kernel
+- new package l3packages
+- upgrade package latex 22152 -> 23639
+- upgrade package latexmk 22466 -> 24722
+- new package luabibentry
+- new package luaindex
+- upgrade package lualatex-math 22339 -> 24009
+- new package luapersian
+- upgrade package marvosym 22202 -> 23630
+- new package match_parens
+- new package mf2pt1
+- upgrade package mh 21405 -> 23333
+- upgrade package misc 17497 -> 23699
+- new package mpcolornames
+- upgrade package ms 16596 -> 24467
+- upgrade package pdfcrop 19781 -> 23499
+- upgrade package pdfpages 21680 -> 23319
+- upgrade package polyglossia 19698 -> 24291
+- upgrade package powerdot 22510 -> 24587
+- new package przechlewski-book
+- upgrade package psnfss 22153 -> 23394
+- new package showhyphens
+- upgrade package statex2 20307 -> 23961
+- upgrade package tabvar 21678 -> 23278
+- upgrade package texcount 18835 -> 23293
+- upgrade package texdef 22049 -> 23260
+- upgrade package texdoc 23089 -> 24354
+- upgrade package texinfo 22646 -> 24108
+- new package texliveonfly
+- upgrade package thumbpdf 23089 -> 23503
+- upgrade package tools 22154 -> 24253
+- upgrade package unicode-math 21391 -> 24022
+- upgrade package xecjk 22487 -> 23994
+- new package xecolor
+- upgrade package xepersian 21397 -> 24687
+- upgrade package xetex 18937 -> 24091
+- upgrade package xetex-itrans 20757 -> 24105
+- upgrade package xunicode 20553 -> 23897
+- deleted package expl3
+- deleted package xecolour
+- deleted package xetex-devanagari
+- deleted package xpackages
+
+texlive-core 2011.23170
+
+- upgrade package amstex 22650 -> 23089
+- upgrade package bibtex 22198 -> 23089
+- upgrade package context 22719 -> 23169
+- upgrade package context-account 16837 -> 23167
+- upgrade package context-algorithmic 15878 -> 23167
+- upgrade package context-bnf 15878 -> 23167
+- upgrade package context-chromato 15878 -> 23167
+- upgrade package context-construction-plan 15878 -> 23167
+- upgrade package context-degrade 15878 -> 23167
+- upgrade package context-filter 21636 -> 23170
+- upgrade package context-fixme 16141 -> 23167
+- upgrade package context-french 15878 -> 23167
+- upgrade package context-fullpage 21201 -> 23167
+- upgrade package context-games 15878 -> 23167
+- upgrade package context-gnuplot 21379 -> 23167
+- upgrade package context-letter 21349 -> 23167
+- upgrade package context-lettrine 15878 -> 23167
+- upgrade package context-lilypond 17445 -> 23167
+- upgrade package context-mathsets 21969 -> 23167
+- upgrade package context-rst 22387 -> 23167
+- upgrade package context-ruby 16847 -> 23167
+- upgrade package context-simplefonts 21854 -> 23167
+- upgrade package context-simpleslides 16975 -> 23167
+- upgrade package context-typearea 15878 -> 23167
+- upgrade package context-typescripts 21034 -> 23167
+- upgrade package context-vim 21637 -> 23167
+- upgrade package cweb 22198 -> 23089
+- upgrade package dvips 22534 -> 23089
+- upgrade package fontinst 18835 -> 23089
+- upgrade package fontname 21489 -> 23088
+- upgrade package hyph-utf8 21077 -> 23085
+- upgrade package latexconfig 21697 -> 22998
+- upgrade package lm 18651 -> 23165
+- upgrade package luamplib 20881 -> 23137
+- upgrade package makeindex 21345 -> 23089
+- upgrade package metafont 22646 -> 23089
+- upgrade package metapost 22680 -> 23089
+- upgrade package mfware 22534 -> 23089
+- upgrade package mptopdf 22719 -> 23089
+- upgrade package pkfix-helper 20168 -> 22981
+- new package texdoc
+- upgrade package thumbpdf 19315 -> 23089
+- upgrade package ttfutils 22534 -> 23089
+
+texlive-core 2011.22722
+
+- upgrade package amstex 22089 -> 22650
+- upgrade package bibtex 22089 -> 22198
+- upgrade package bundledoc 18835 -> 22307
+- upgrade package context 21345 -> 22719
+- new package context-rst
+- upgrade package cslatex 18835 -> 22650
+- upgrade package csplain 18835 -> 22650
+- upgrade package ctable 22095 -> 22269
+- upgrade package cweb 22089 -> 22198
+- upgrade package dvips 22035 -> 22534
+- upgrade package etex 22089 -> 22198
+- upgrade package euro 15878 -> 22191
+- upgrade package expl3 21634 -> 22236
+- upgrade package ifluatex 22124 -> 22180
+- upgrade package jmn 15878 -> 22719
+- upgrade package latexmk 22132 -> 22466
+- upgrade package lithuanian 15878 -> 22722
+- upgrade package luacode 20372 -> 22605
+- new package lualatex-math
+- upgrade package luaotfload 21450 -> 22165
+- upgrade package luatexbase 20476 -> 22560
+- upgrade package marvosym 15878 -> 22202
+- upgrade package metafont 22089 -> 22646
+- upgrade package metapost 22106 -> 22680
+- upgrade package mex 18835 -> 22650
+- upgrade package mfware 22089 -> 22534
+- upgrade package mptopdf 18835 -> 22719
+- upgrade package oberdiek 22124 -> 22180
+- upgrade package pdftex-def 21241 -> 22653
+- upgrade package pgf 20236 -> 22614
+- upgrade package pkfix 18835 -> 22168
+- upgrade package powerdot 20970 -> 22510
+- upgrade package texinfo 21803 -> 22646
+- upgrade package ttfutils 18835 -> 22534
+- upgrade package unisugar 21552 -> 22357
+- upgrade package xecjk 21117 -> 22487
+- new package xetex-devanagari
+- upgrade package xpackages 21184 -> 22347
+- deleted package eurofont
+- deleted package eurosans
+- deleted package harvardkyoto
+
+texlive-core 2010.22154-1
+
+- upgrade package amscls 20248 -> 22145
+- upgrade package amsmath 20250 -> 22147
+- upgrade package amstex 18835 -> 22089
+- upgrade package avantgar 15878 -> 21993
+- upgrade package babel 20253 -> 22149
+- new package bibleref-french
+- new package bibleref-german
+- upgrade package bibtex 20729 -> 22089
+- upgrade package bidi 20057 -> 22125
+- upgrade package bookman 15878 -> 21993
+- upgrade package context 20438 -> 21345
+- upgrade package context-filter 20288 -> 21636
+- upgrade package context-fullpage 18021 -> 21201
+- upgrade package context-gnuplot 15878 -> 21379
+- upgrade package context-letter 20359 -> 21349
+- upgrade package context-mathsets 15878 -> 21969
+- upgrade package context-simplefonts 20103 -> 21854
+- upgrade package context-typescripts 19977 -> 21034
+- upgrade package context-vim 15878 -> 21637
+- upgrade package courier 20926 -> 21993
+- upgrade package ctable 20274 -> 22095
+- upgrade package cweb 18835 -> 22089
+- upgrade package drv 20511 -> 21499
+- upgrade package dvips 20950 -> 22035
+- upgrade package epsf 17190 -> 21461
+- upgrade package eso-pic 20020 -> 21515
+- upgrade package etex 16381 -> 22089
+- upgrade package expl3 20793 -> 21634
+- new package fixlatvian
+- upgrade package fontname 20190 -> 21489
+- upgrade package fontspec 20472 -> 21527
+- upgrade package fragmaster 18835 -> 21460
+- upgrade package frontespizio 19139 -> 21648
+- new package gmp
+- upgrade package graphics 20255 -> 22151
+- upgrade package helvetic 20926 -> 21993
+- upgrade package hyperref 20783 -> 22110
+- upgrade package hyph-utf8 19815 -> 21077
+- upgrade package ifluatex 18100 -> 22124
+- upgrade package isomath 19786 -> 21296
+- upgrade package koma-script 19797 -> 21983
+- upgrade package latex 20256 -> 22152
+- upgrade package latexconfig 20663 -> 21697
+- upgrade package latexmk 20887 -> 22132
+- upgrade package ltxmisc 20350 -> 21927
+- upgrade package lualibs 19328 -> 21149
+- upgrade package luaotfload 20475 -> 21450
+- upgrade package makeindex 18835 -> 21345
+- upgrade package memoir 19810 -> 21638
+- upgrade package metafont 18835 -> 22089
+- upgrade package metapost 18835 -> 22106
+- upgrade package mfpic 18920 -> 21800
+- upgrade package mfware 18835 -> 22089
+- upgrade package mh 19794 -> 21405
+- upgrade package mkjobtexmf 20859 -> 21345
+- upgrade package mp3d 15878 -> 21771
+- new package mpgraphics
+- upgrade package ncntrsbk 15878 -> 21993
+- upgrade package oberdiek 18100 -> 22124
+- upgrade package oubraces 17175 -> 21833
+- upgrade package palatino 15878 -> 21993
+- upgrade package path 19866 -> 22045
+- upgrade package pdfpages 20796 -> 21680
+- upgrade package pdftex-def 20593 -> 21241
+- upgrade package powerdot 20649 -> 20970
+- upgrade package psnfss 20257 -> 22153
+- upgrade package ruhyphen 18394 -> 21081
+- upgrade package setspace 15878 -> 21104
+- upgrade package stmaryrd 15878 -> 22027
+- new package sty2dtx
+- upgrade package symbol 15878 -> 21570
+- upgrade package tabvar 19619 -> 21678
+- new package texdef
+- upgrade package texinfo 20918 -> 21803
+- upgrade package times 20926 -> 21993
+- upgrade package tools 20258 -> 22154
+- upgrade package ukrhyph 18396 -> 21081
+- upgrade package ulem 20083 -> 21840
+- upgrade package unicode-math 19934 -> 21391
+- new package unisugar
+- upgrade package xecjk 18848 -> 21117
+- upgrade package xepersian 20681 -> 21397
+- upgrade package xpackages 20954 -> 21184
+- upgrade package ytableau 20357 -> 21264
+- upgrade package zapfchan 15878 -> 21993
+- upgrade package zapfding 15878 -> 21570
+- deleted package circle
+- deleted package citeref
+

Deleted: PKGBUILD
===================================================================
--- PKGBUILD	2020-12-06 09:56:42 UTC (rev 402921)
+++ PKGBUILD	2020-12-06 09:56:49 UTC (rev 402922)
@@ -1,327 +0,0 @@
-# Maintainer: Rémy Oudompheng <remy at archlinux.org>
-
-pkgname=texlive-core
-pkgver=2020.55416
-_revnr=${pkgver#2020.}
-pkgrel=1
-pkgdesc="TeX Live core distribution"
-license=('GPL')
-arch=(any)
-depends=('texlive-bin' 'perl')
-optdepends=(
-  'dialog:      for texconfig'
-  'ghostscript: for epstopdf, epspdf and other ConTeXt tools' 
-  'java-runtime: for utilities like arara, texplate'
-  'perl-tk:     for texdoctk'
-  'psutils:     to manipulate the output of dvips'
-  'python:      for pythontex'
-  'python2:     for dviasm'
-  'ruby:        for old ConTeXT MkII and epspdf'
-  't1utils:     can be useful when installing Type1 fonts'
-)
-groups=('texlive-most')
-conflicts=('tetex' 'texlive-latex3' 'pdfjam'
-           'texlive-genericextra'
-           'texlive-plainextra')
-provides=('tetex' 'texlive-latex3' 'pdfjam'
-          'texlive-genericextra'
-          'texlive-plainextra')
-replaces=('tetex' 'texlive-latex3' 'pdfjam'
-          'texlive-genericextra'
-          'texlive-plainextra')
-url='http://tug.org/texlive/'
-source=("https://sources.archlinux.org/other/texlive/$pkgname-$pkgver-src.zip"
-        "$pkgname.maps"
-        "$pkgname.fmts"
-        "mktexlsr.hook"
-        "mktexlsr.script"
-        "texlive-updmap.hook"
-        "texlive-updmap.script"
-        "texlive-fmtutil.hook"
-        "texlive-fmtutil.script"
-        "texmf.cnf"
-        "texmfcnf.lua"
-        "09-texlive-fonts.conf")
-install=texlive.install
-backup=(etc/texmf/web2c/texmf.cnf \
-        etc/texmf/chktex/chktexrc \
-	etc/texmf/dvipdfmx/dvipdfmx.cfg \
-	etc/texmf/dvips/config/config.ps \
-	etc/texmf/tex/generic/config/language.dat \
-	etc/texmf/tex/generic/config/language.def \
-	etc/texmf/tex/generic/tex-ini-files/pdftexconfig.tex \
-	etc/texmf/ttf2pk/ttf2pk.cfg \
-	etc/texmf/web2c/fmtutil.cnf \
-	etc/texmf/web2c/mktex.cnf \
-	etc/texmf/xdvi/XDvi)
-sha256sums=('8e025c2dfa4e19dcb6aa5e661874d2c2a158aa2e1a078c11a4ddd6347bd9db45'
-            '275253728d884b2b75e01840b0824c1fe5afbdda91fafeacd33deb6cd92341a3'
-            '09cbe0717c53078d30bdc378322f82e673dafbe7cf76a11e0a3c6dd54dcdfea3'
-            'c76f01fe2a42e5860f7d0b2f16a4fc09101e1a14ea7488985e914cda749f1a21'
-            '05afeae62a5d4c9de79c838c9636e2aefe9ad1d6b787fed4e5930c13baf60eba'
-            '2141c0842668fb937fd21ca2fae39b642c9665656e404a0d4ee7bdc477bf51fe'
-            'ee6e76192a5ad880a2152cd7900b86c8465239fb228045a2f8360b0d7a449f4a'
-            'b641550fe7727422b6964d505db7dbc35b3680a9d47b8d97ac550828bdb9bac7'
-            'f96e9f815fa0a4b85e677f2a9215d9106b8abe46eceb3f3e36a6c76eda3e4a85'
-            '65ffceec62ccb6e1b01f58ff8e7ec6123f6385139d45bec7f8332f6f3c717912'
-            '0b6c3ee516608ce04d7133db52cadfa1be5d885b3f82bb39dc5897b213847e0d'
-            '5e79c40cf3ab93348fc89e97890198601767ea2c8fea89ea76088c17a2b35962')
-
-build() {
-   cd "$srcdir"
-   echo -n "   --> extracting all packages... "
-   for p in *.tar.xz; do 
-     bsdtar -xf $p
-   done
-   echo "done"
-   rm -rf source doc
-}
-
-package() {
-   cd "$srcdir"
-
-   # Install packages.
-   install -m755 -d "$pkgdir"/var/lib/texmf/arch/installedpkgs
-   sed -i '/^#/d' CONTENTS
-   install -m644 CONTENTS "$pkgdir"/var/lib/texmf/arch/installedpkgs/${pkgname}_${_revnr}.pkgs
-   install -m644 $pkgname.maps "$pkgdir"/var/lib/texmf/arch/installedpkgs/
-   install -m644 $pkgname.fmts "$pkgdir"/var/lib/texmf/arch/installedpkgs/
-   install -m755 -d "$pkgdir"/usr/share
-   wanteddirs=$(for d in *; do test -d $d && [[ $d != texmf* ]] && echo $d; done) || true
-   for dir in $wanteddirs; do
-     find $dir -type d -exec install -d -m755 "$pkgdir"/usr/share/texmf-dist/'{}' \;
-     find $dir -type f -exec install -m644 '{}' "$pkgdir"/usr/share/texmf-dist/'{}' \;
-   done
-   find texmf-dist -type d -exec install -d -m755 "$pkgdir"/usr/share/'{}' \;
-   find texmf-dist -type f -exec install -m644 '{}' "$pkgdir"/usr/share/'{}' \;
-   find texmf-dist -type f -executable -exec chmod 755 "$pkgdir"/usr/share/'{}' \;
- 
-   #############################################################
-   ### install texmf tree
-   echo "--> installing the /etc/texmf tree"
-   install -d -m755 "$pkgdir"/etc/texmf/web2c
-   install -d -m755 "$pkgdir"/etc/texmf/chktex
-   install -d -m755 "$pkgdir"/etc/texmf/dvips/config
-   install -d -m755 "$pkgdir"/etc/texmf/dvipdfmx
-   install -d -m755 "$pkgdir"/etc/texmf/tex/generic/config
-   install -d -m755 "$pkgdir"/etc/texmf/tex/generic/tex-ini-files
-   install -d -m755 "$pkgdir"/etc/texmf/ttf2pk
-   install -d -m755 "$pkgdir"/etc/texmf/xdvi
-   install -d -m755 "$pkgdir"/etc/fonts/conf.avail
-   install -m644 "$srcdir"/09-texlive-fonts.conf "$pkgdir"/etc/fonts/conf.avail/
-
-   # Remove manpages (already in texlive-bin).
-   rm -rf "$pkgdir"/usr/share/texmf-dist/doc/man
-
-   # copy config files to $TEXMFCONFIG tree
-   cp -a "$pkgdir"/usr/share/texmf-dist/chktex/chktexrc \
-     	"$pkgdir"/etc/texmf/chktex/
-   cp -a "$pkgdir"/usr/share/texmf-dist/web2c/mktex.cnf \
-   	  "$pkgdir"/etc/texmf/web2c/
-   cp -a "$pkgdir"/usr/share/texmf-dist/web2c/updmap-hdr.cfg \
-   	  "$pkgdir"/etc/texmf/web2c/
-   cp -a "$pkgdir"/usr/share/texmf-dist/web2c/fmtutil-hdr.cnf \
-   	  "$pkgdir"/etc/texmf/web2c/fmtutil.cnf
-   cp -a "$pkgdir"/usr/share/texmf-dist/dvips/config/config.ps \
-   	  "$pkgdir"/etc/texmf/dvips/config/
-   cp -a "$pkgdir"/usr/share/texmf-dist/dvipdfmx/dvipdfmx.cfg \
-   	  "$pkgdir"/etc/texmf/dvipdfmx/
-   cp -a "$pkgdir"/usr/share/texmf-dist/tex/generic/tex-ini-files/pdftexconfig.tex \
-   	  "$pkgdir"/etc/texmf/tex/generic/tex-ini-files/
-   cp -a "$pkgdir"/usr/share/texmf-dist/tex/generic/config/language.dat \
-   	  "$pkgdir"/etc/texmf/tex/generic/config/
-   cp -a "$pkgdir"/usr/share/texmf-dist/tex/generic/config/language.def \
-   	  "$pkgdir"/etc/texmf/tex/generic/config/
-   cp -a "$pkgdir"/usr/share/texmf-dist/ttf2pk/ttf2pk.cfg \
-   	  "$pkgdir"/etc/texmf/ttf2pk/
-   cp -a "$pkgdir"/usr/share/texmf-dist/xdvi/XDvi \
-   	  "$pkgdir"/etc/texmf/xdvi/
-   # remove TL specific warnings in the language.{dat,def} files:
-   sed -i -e '/DO NOT EDIT/,+3 d' "$pkgdir"/etc/texmf/tex/generic/config/language.*
-
-   # replace upstream texmf.cnf with ours
-   rm -f "$pkgdir"/usr/share/texmf-dist/web2c/texmf.cnf
-   install -m644 "$srcdir"/texmf.cnf "$pkgdir"/etc/texmf/web2c/texmf.cnf
-   # since the location of texmf.cnf is hard-wired to be under /usr/share/texmf/web2c
-   # we make a symlink from /etc/texmf/web2c/texmf.cnf to the latter
-   ln -sf /etc/texmf/web2c/texmf.cnf "$pkgdir"/usr/share/texmf-dist/web2c/texmf.cnf
-   # replace upstream texmfcnf.lua with ours
-   install -m644 "$srcdir"/texmfcnf.lua "$pkgdir"/usr/share/texmf-dist/web2c/texmfcnf.lua
-
-   # use python2 instead of python for scripts.
-   sed -i '1s/python/python2/' "$pkgdir"/usr/share/texmf-dist/scripts/de-macro/de-macro
-
-   # install Perl libraries
-   mv "$pkgdir"/usr/share/texmf-dist/tlpkg "$pkgdir"/usr/share
-   rm -rf "$pkgdir"/usr/share/tlpkg/tlpobj
-
-   ## install pacman hooks
-   install -D -m644 ${srcdir}/mktexlsr.hook "$pkgdir/usr/share/libalpm/hooks/mktexlsr.hook"
-   install -D -m644 ${srcdir}/texlive-updmap.hook "$pkgdir/usr/share/libalpm/hooks/texlive-updmap.hook"
-   install -D -m644 ${srcdir}/texlive-fmtutil.hook "$pkgdir/usr/share/libalpm/hooks/texlive-fmtutil.hook"
-   install -D -m755 ${srcdir}/mktexlsr.script "$pkgdir/usr/share/libalpm/scripts/mktexlsr"
-   install -D -m755 ${srcdir}/texlive-updmap.script "$pkgdir/usr/share/libalpm/scripts/texlive-updmap"
-   install -D -m755 ${srcdir}/texlive-fmtutil.script "$pkgdir/usr/share/libalpm/scripts/texlive-fmtutil"
-
-   # remove upstream updmap.cfg: it contains too many maps.
-   rm "${pkgdir}/usr/share/texmf-dist/web2c/updmap.cfg"
-   # remove upstream fmtutil.cnf: it will be autogenerated
-   rm "${pkgdir}/usr/share/texmf-dist/web2c/fmtutil.cnf"
- 
-   # more cleanup
-   rm -rf "$pkgdir/usr/share/texmf-dist/scripts/context/stubs/mswin/"
-
-    # link programs from /usr/share/texmf-dist/scripts
-    _linked_scripts="
-a2ping/a2ping.pl
-accfonts/mkt1font
-accfonts/vpl2ovp
-accfonts/vpl2vpl
-adhocfilelist/adhocfilelist.sh
-arara/arara.sh
-attachfile2/pdfatfi.pl
-bundledoc/arlatex
-bundledoc/bundledoc
-checkcites/checkcites.lua
-checklistings/checklistings.sh
-chklref/chklref.pl
-chktex/chkweb.sh
-chktex/deweb.pl
-cjk-gs-integrate/cjk-gs-integrate.pl
-clojure-pamphlet/pamphletangler
-cluttex/cluttex.lua
-context/perl/mptopdf.pl
-context/stubs/unix/context
-context/stubs/unix/contextjit
-context/stubs/unix/luatools
-context/stubs/unix/mtxrun
-context/stubs/unix/mtxrunjit
-context/stubs/unix/texexec
-context/stubs/unix/texmfstart
-ctan-o-mat/ctan-o-mat.pl
-ctanbib/ctanbib
-ctanify/ctanify
-ctanupload/ctanupload.pl
-de-macro/de-macro
-dosepsbin/dosepsbin.pl
-dtxgen/dtxgen
-dviasm/dviasm.py
-dviinfox/dviinfox.pl
-epstopdf/epstopdf.pl
-findhyph/findhyph
-fontools/afm2afm
-fontools/autoinst
-fontools/ot2kpx
-fragmaster/fragmaster.pl
-installfont/installfont-tl
-jfmutil/jfmutil.pl
-ketcindy/ketcindy.sh
-latex-git-log/latex-git-log
-latex-papersize/latex-papersize.py
-latex2man/latex2man
-latex2nemeth/latex2nemeth
-latexdiff/latexdiff-vc.pl
-latexdiff/latexdiff.pl
-latexdiff/latexrevise.pl
-latexfileversion/latexfileversion
-latexindent/latexindent.pl
-latexmk/latexmk.pl
-latexpand/latexpand
-ltxfileinfo/ltxfileinfo
-ltximg/ltximg.pl
-luaotfload/luaotfload-tool.lua
-lwarp/lwarpmk.lua
-make4ht/make4ht
-match_parens/match_parens
-mf2pt1/mf2pt1.pl
-mkjobtexmf/mkjobtexmf.pl
-pdfbook2/pdfbook2
-pdfcrop/pdfcrop.pl
-pdfjam/pdfjam
-pdflatexpicscale/pdflatexpicscale.pl
-pdftex-quiet/pdftex-quiet
-pdfxup/pdfxup
-pfarrei/a5toa4.tlu
-pfarrei/pfarrei.tlu
-pkfix-helper/pkfix-helper
-pkfix/pkfix.pl
-ps2eps/ps2eps.pl
-purifyeps/purifyeps
-pythontex/depythontex.py
-pythontex/pythontex.py
-simpdftex/simpdftex
-srcredact/srcredact.pl
-sty2dtx/sty2dtx.pl
-tex4ebook/tex4ebook
-tex4ht/ht.sh
-tex4ht/htcontext.sh
-tex4ht/htlatex.sh
-tex4ht/htmex.sh
-tex4ht/httex.sh
-tex4ht/httexi.sh
-tex4ht/htxelatex.sh
-tex4ht/htxetex.sh
-tex4ht/mk4ht.pl
-tex4ht/xhlatex.sh
-texcount/texcount.pl
-texdef/texdef.pl
-texdiff/texdiff
-texdirflatten/texdirflatten
-texdoc/texdoc.tlu
-texdoctk/texdoctk.pl
-texfot/texfot.pl
-texlive-extra/allcm.sh
-texlive-extra/allneeded.sh
-texlive-extra/dvi2fax.sh
-texlive-extra/dvired.sh
-texlive-extra/e2pall.pl
-texlive-extra/fontinst.sh
-texlive-extra/kpsetool.sh
-texlive-extra/kpsewhere.sh
-texlive-extra/ps2frag.sh
-texlive-extra/pslatex.sh
-texlive-extra/texconfig-dialog.sh
-texlive-extra/texconfig-sys.sh
-texlive-extra/texconfig.sh
-texlive-extra/texlinks.sh
-texlive/fmtutil-sys.sh
-texlive/fmtutil-user.sh
-texlive/fmtutil.pl
-texlive/mktexlsr
-texlive/mktexmf
-texlive/mktexpk
-texlive/mktextfm
-texlive/rungs.tlu
-texlive/updmap-sys.sh
-texlive/updmap-user.sh
-texlive/updmap.pl
-texliveonfly/texliveonfly.py
-texloganalyser/texloganalyser
-texplate/texplate.sh
-thumbpdf/thumbpdf.pl
-typeoutfileinfo/typeoutfileinfo.sh
-xindex/xindex.lua
-xindy/texindy.pl
-xindy/xindy.pl
-"
-    install -m755 -d "$pkgdir/usr/bin"
-    for _script in ${_linked_scripts}; do
-        _scriptbase=$(basename $_script)
-        _scriptbase=${_scriptbase%.*}
-        ln -s /usr/share/texmf-dist/scripts/${_script} "${pkgdir}/usr/bin/${_scriptbase}"
-    done
-    ln -s /usr/share/texmf-dist/scripts/listings-ext/listings-ext.sh "${pkgdir}/usr/bin/listings-ext.sh"
-
-    # additional symlinks
-    ln -s allcm "${pkgdir}"/usr/bin/allec
-    ln -s cluttex "${pkgdir}"/usr/bin/cllualatex
-    ln -s cluttex "${pkgdir}"/usr/bin/clxelatex
-    ln -s epstopdf "${pkgdir}"/usr/bin/repstopdf
-    ln -s fmtutil "${pkgdir}"/usr/bin/mktexfmt
-    ln -s kpsetool "${pkgdir}"/usr/bin/kpsepath
-    ln -s kpsetool "${pkgdir}"/usr/bin/kpsexpand
-    ln -s luaotfload-tool "${pkgdir}"/usr/bin/mkluatexfontdb
-    ln -s mktexlsr "${pkgdir}"/usr/bin/texhash
-    ln -s pdfcrop "${pkgdir}"/usr/bin/rpdfcrop
-    ln -s texdef "${pkgdir}"/usr/bin/latexdef
-}

Copied: texlive-core/repos/extra-any/PKGBUILD (from rev 402921, texlive-core/trunk/PKGBUILD)
===================================================================
--- PKGBUILD	                        (rev 0)
+++ PKGBUILD	2020-12-06 09:56:49 UTC (rev 402922)
@@ -0,0 +1,327 @@
+# Maintainer: Rémy Oudompheng <remy at archlinux.org>
+
+pkgname=texlive-core
+pkgver=2020.57066
+_revnr=${pkgver#2020.}
+pkgrel=1
+pkgdesc="TeX Live core distribution"
+license=('GPL')
+arch=(any)
+depends=('texlive-bin' 'perl')
+optdepends=(
+  'dialog:      for texconfig'
+  'ghostscript: for epstopdf, epspdf and other ConTeXt tools' 
+  'java-runtime: for utilities like arara, texplate'
+  'perl-tk:     for texdoctk'
+  'psutils:     to manipulate the output of dvips'
+  'python:      for pythontex'
+  'python2:     for dviasm'
+  'ruby:        for old ConTeXT MkII and epspdf'
+  't1utils:     can be useful when installing Type1 fonts'
+)
+groups=('texlive-most')
+conflicts=('tetex' 'texlive-latex3' 'pdfjam'
+           'texlive-genericextra'
+           'texlive-plainextra')
+provides=('tetex' 'texlive-latex3' 'pdfjam'
+          'texlive-genericextra'
+          'texlive-plainextra')
+replaces=('tetex' 'texlive-latex3' 'pdfjam'
+          'texlive-genericextra'
+          'texlive-plainextra')
+url='http://tug.org/texlive/'
+source=("https://sources.archlinux.org/other/texlive/$pkgname-$pkgver-src.zip"
+        "$pkgname.maps"
+        "$pkgname.fmts"
+        "mktexlsr.hook"
+        "mktexlsr.script"
+        "texlive-updmap.hook"
+        "texlive-updmap.script"
+        "texlive-fmtutil.hook"
+        "texlive-fmtutil.script"
+        "texmf.cnf"
+        "texmfcnf.lua"
+        "09-texlive-fonts.conf")
+install=texlive.install
+backup=(etc/texmf/web2c/texmf.cnf \
+        etc/texmf/chktex/chktexrc \
+	etc/texmf/dvipdfmx/dvipdfmx.cfg \
+	etc/texmf/dvips/config/config.ps \
+	etc/texmf/tex/generic/config/language.dat \
+	etc/texmf/tex/generic/config/language.def \
+	etc/texmf/tex/generic/tex-ini-files/pdftexconfig.tex \
+	etc/texmf/ttf2pk/ttf2pk.cfg \
+	etc/texmf/web2c/fmtutil.cnf \
+	etc/texmf/web2c/mktex.cnf \
+	etc/texmf/xdvi/XDvi)
+sha256sums=('b3280ddd2b2c8d41dba3784ba41b755e317e5352868015fe1f70a16b24f5dde9'
+            'bbed1c20c91daca967e344505b9dd4e502569365709ce6b87be5510c2ebb98ef'
+            '09cbe0717c53078d30bdc378322f82e673dafbe7cf76a11e0a3c6dd54dcdfea3'
+            'c76f01fe2a42e5860f7d0b2f16a4fc09101e1a14ea7488985e914cda749f1a21'
+            '05afeae62a5d4c9de79c838c9636e2aefe9ad1d6b787fed4e5930c13baf60eba'
+            '2141c0842668fb937fd21ca2fae39b642c9665656e404a0d4ee7bdc477bf51fe'
+            'ee6e76192a5ad880a2152cd7900b86c8465239fb228045a2f8360b0d7a449f4a'
+            'b641550fe7727422b6964d505db7dbc35b3680a9d47b8d97ac550828bdb9bac7'
+            'f96e9f815fa0a4b85e677f2a9215d9106b8abe46eceb3f3e36a6c76eda3e4a85'
+            '65ffceec62ccb6e1b01f58ff8e7ec6123f6385139d45bec7f8332f6f3c717912'
+            '0b6c3ee516608ce04d7133db52cadfa1be5d885b3f82bb39dc5897b213847e0d'
+            '5e79c40cf3ab93348fc89e97890198601767ea2c8fea89ea76088c17a2b35962')
+
+build() {
+   cd "$srcdir"
+   echo -n "   --> extracting all packages... "
+   for p in *.tar.xz; do 
+     bsdtar -xf $p
+   done
+   echo "done"
+   rm -rf source doc
+}
+
+package() {
+   cd "$srcdir"
+
+   # Install packages.
+   install -m755 -d "$pkgdir"/var/lib/texmf/arch/installedpkgs
+   sed -i '/^#/d' CONTENTS
+   install -m644 CONTENTS "$pkgdir"/var/lib/texmf/arch/installedpkgs/${pkgname}_${_revnr}.pkgs
+   install -m644 $pkgname.maps "$pkgdir"/var/lib/texmf/arch/installedpkgs/
+   install -m644 $pkgname.fmts "$pkgdir"/var/lib/texmf/arch/installedpkgs/
+   install -m755 -d "$pkgdir"/usr/share
+   wanteddirs=$(for d in *; do test -d $d && [[ $d != texmf* ]] && echo $d; done) || true
+   for dir in $wanteddirs; do
+     find $dir -type d -exec install -d -m755 "$pkgdir"/usr/share/texmf-dist/'{}' \;
+     find $dir -type f -exec install -m644 '{}' "$pkgdir"/usr/share/texmf-dist/'{}' \;
+   done
+   find texmf-dist -type d -exec install -d -m755 "$pkgdir"/usr/share/'{}' \;
+   find texmf-dist -type f -exec install -m644 '{}' "$pkgdir"/usr/share/'{}' \;
+   find texmf-dist -type f -executable -exec chmod 755 "$pkgdir"/usr/share/'{}' \;
+ 
+   #############################################################
+   ### install texmf tree
+   echo "--> installing the /etc/texmf tree"
+   install -d -m755 "$pkgdir"/etc/texmf/web2c
+   install -d -m755 "$pkgdir"/etc/texmf/chktex
+   install -d -m755 "$pkgdir"/etc/texmf/dvips/config
+   install -d -m755 "$pkgdir"/etc/texmf/dvipdfmx
+   install -d -m755 "$pkgdir"/etc/texmf/tex/generic/config
+   install -d -m755 "$pkgdir"/etc/texmf/tex/generic/tex-ini-files
+   install -d -m755 "$pkgdir"/etc/texmf/ttf2pk
+   install -d -m755 "$pkgdir"/etc/texmf/xdvi
+   install -d -m755 "$pkgdir"/etc/fonts/conf.avail
+   install -m644 "$srcdir"/09-texlive-fonts.conf "$pkgdir"/etc/fonts/conf.avail/
+
+   # Remove manpages (already in texlive-bin).
+   rm -rf "$pkgdir"/usr/share/texmf-dist/doc/man
+
+   # copy config files to $TEXMFCONFIG tree
+   cp -a "$pkgdir"/usr/share/texmf-dist/chktex/chktexrc \
+     	"$pkgdir"/etc/texmf/chktex/
+   cp -a "$pkgdir"/usr/share/texmf-dist/web2c/mktex.cnf \
+   	  "$pkgdir"/etc/texmf/web2c/
+   cp -a "$pkgdir"/usr/share/texmf-dist/web2c/updmap-hdr.cfg \
+   	  "$pkgdir"/etc/texmf/web2c/
+   cp -a "$pkgdir"/usr/share/texmf-dist/web2c/fmtutil-hdr.cnf \
+   	  "$pkgdir"/etc/texmf/web2c/fmtutil.cnf
+   cp -a "$pkgdir"/usr/share/texmf-dist/dvips/config/config.ps \
+   	  "$pkgdir"/etc/texmf/dvips/config/
+   cp -a "$pkgdir"/usr/share/texmf-dist/dvipdfmx/dvipdfmx.cfg \
+   	  "$pkgdir"/etc/texmf/dvipdfmx/
+   cp -a "$pkgdir"/usr/share/texmf-dist/tex/generic/tex-ini-files/pdftexconfig.tex \
+   	  "$pkgdir"/etc/texmf/tex/generic/tex-ini-files/
+   cp -a "$pkgdir"/usr/share/texmf-dist/tex/generic/config/language.dat \
+   	  "$pkgdir"/etc/texmf/tex/generic/config/
+   cp -a "$pkgdir"/usr/share/texmf-dist/tex/generic/config/language.def \
+   	  "$pkgdir"/etc/texmf/tex/generic/config/
+   cp -a "$pkgdir"/usr/share/texmf-dist/ttf2pk/ttf2pk.cfg \
+   	  "$pkgdir"/etc/texmf/ttf2pk/
+   cp -a "$pkgdir"/usr/share/texmf-dist/xdvi/XDvi \
+   	  "$pkgdir"/etc/texmf/xdvi/
+   # remove TL specific warnings in the language.{dat,def} files:
+   sed -i -e '/DO NOT EDIT/,+3 d' "$pkgdir"/etc/texmf/tex/generic/config/language.*
+
+   # replace upstream texmf.cnf with ours
+   rm -f "$pkgdir"/usr/share/texmf-dist/web2c/texmf.cnf
+   install -m644 "$srcdir"/texmf.cnf "$pkgdir"/etc/texmf/web2c/texmf.cnf
+   # since the location of texmf.cnf is hard-wired to be under /usr/share/texmf/web2c
+   # we make a symlink from /etc/texmf/web2c/texmf.cnf to the latter
+   ln -sf /etc/texmf/web2c/texmf.cnf "$pkgdir"/usr/share/texmf-dist/web2c/texmf.cnf
+   # replace upstream texmfcnf.lua with ours
+   install -m644 "$srcdir"/texmfcnf.lua "$pkgdir"/usr/share/texmf-dist/web2c/texmfcnf.lua
+
+   # use python2 instead of python for scripts.
+   sed -i '1s/python/python2/' "$pkgdir"/usr/share/texmf-dist/scripts/de-macro/de-macro
+
+   # install Perl libraries
+   mv "$pkgdir"/usr/share/texmf-dist/tlpkg "$pkgdir"/usr/share
+   rm -rf "$pkgdir"/usr/share/tlpkg/tlpobj
+
+   ## install pacman hooks
+   install -D -m644 ${srcdir}/mktexlsr.hook "$pkgdir/usr/share/libalpm/hooks/mktexlsr.hook"
+   install -D -m644 ${srcdir}/texlive-updmap.hook "$pkgdir/usr/share/libalpm/hooks/texlive-updmap.hook"
+   install -D -m644 ${srcdir}/texlive-fmtutil.hook "$pkgdir/usr/share/libalpm/hooks/texlive-fmtutil.hook"
+   install -D -m755 ${srcdir}/mktexlsr.script "$pkgdir/usr/share/libalpm/scripts/mktexlsr"
+   install -D -m755 ${srcdir}/texlive-updmap.script "$pkgdir/usr/share/libalpm/scripts/texlive-updmap"
+   install -D -m755 ${srcdir}/texlive-fmtutil.script "$pkgdir/usr/share/libalpm/scripts/texlive-fmtutil"
+
+   # remove upstream updmap.cfg: it contains too many maps.
+   rm "${pkgdir}/usr/share/texmf-dist/web2c/updmap.cfg"
+   # remove upstream fmtutil.cnf: it will be autogenerated
+   rm "${pkgdir}/usr/share/texmf-dist/web2c/fmtutil.cnf"
+ 
+   # more cleanup
+   rm -rf "$pkgdir/usr/share/texmf-dist/scripts/context/stubs/mswin/"
+
+    # link programs from /usr/share/texmf-dist/scripts
+    _linked_scripts="
+a2ping/a2ping.pl
+accfonts/mkt1font
+accfonts/vpl2ovp
+accfonts/vpl2vpl
+adhocfilelist/adhocfilelist.sh
+arara/arara.sh
+attachfile2/pdfatfi.pl
+bundledoc/arlatex
+bundledoc/bundledoc
+checkcites/checkcites.lua
+checklistings/checklistings.sh
+chklref/chklref.pl
+chktex/chkweb.sh
+chktex/deweb.pl
+cjk-gs-integrate/cjk-gs-integrate.pl
+clojure-pamphlet/pamphletangler
+cluttex/cluttex.lua
+context/perl/mptopdf.pl
+context/stubs/unix/context
+context/stubs/unix/contextjit
+context/stubs/unix/luatools
+context/stubs/unix/mtxrun
+context/stubs/unix/mtxrunjit
+context/stubs/unix/texexec
+context/stubs/unix/texmfstart
+ctan-o-mat/ctan-o-mat.pl
+ctanbib/ctanbib
+ctanify/ctanify
+ctanupload/ctanupload.pl
+de-macro/de-macro
+dosepsbin/dosepsbin.pl
+dtxgen/dtxgen
+dviasm/dviasm.py
+dviinfox/dviinfox.pl
+epstopdf/epstopdf.pl
+findhyph/findhyph
+fontools/afm2afm
+fontools/autoinst
+fontools/ot2kpx
+fragmaster/fragmaster.pl
+installfont/installfont-tl
+jfmutil/jfmutil.pl
+ketcindy/ketcindy.sh
+latex-git-log/latex-git-log
+latex-papersize/latex-papersize.py
+latex2man/latex2man
+latex2nemeth/latex2nemeth
+latexdiff/latexdiff-vc.pl
+latexdiff/latexdiff.pl
+latexdiff/latexrevise.pl
+latexfileversion/latexfileversion
+latexindent/latexindent.pl
+latexmk/latexmk.pl
+latexpand/latexpand
+ltxfileinfo/ltxfileinfo
+ltximg/ltximg.pl
+luaotfload/luaotfload-tool.lua
+lwarp/lwarpmk.lua
+make4ht/make4ht
+match_parens/match_parens
+mf2pt1/mf2pt1.pl
+mkjobtexmf/mkjobtexmf.pl
+pdfbook2/pdfbook2
+pdfcrop/pdfcrop.pl
+pdfjam/pdfjam
+pdflatexpicscale/pdflatexpicscale.pl
+pdftex-quiet/pdftex-quiet
+pdfxup/pdfxup
+pfarrei/a5toa4.tlu
+pfarrei/pfarrei.tlu
+pkfix-helper/pkfix-helper
+pkfix/pkfix.pl
+ps2eps/ps2eps.pl
+purifyeps/purifyeps
+pythontex/depythontex.py
+pythontex/pythontex.py
+simpdftex/simpdftex
+srcredact/srcredact.pl
+sty2dtx/sty2dtx.pl
+tex4ebook/tex4ebook
+tex4ht/ht.sh
+tex4ht/htcontext.sh
+tex4ht/htlatex.sh
+tex4ht/htmex.sh
+tex4ht/httex.sh
+tex4ht/httexi.sh
+tex4ht/htxelatex.sh
+tex4ht/htxetex.sh
+tex4ht/mk4ht.pl
+tex4ht/xhlatex.sh
+texcount/texcount.pl
+texdef/texdef.pl
+texdiff/texdiff
+texdirflatten/texdirflatten
+texdoc/texdoc.tlu
+texdoctk/texdoctk.pl
+texfot/texfot.pl
+texlive-extra/allcm.sh
+texlive-extra/allneeded.sh
+texlive-extra/dvi2fax.sh
+texlive-extra/dvired.sh
+texlive-extra/e2pall.pl
+texlive-extra/fontinst.sh
+texlive-extra/kpsetool.sh
+texlive-extra/kpsewhere.sh
+texlive-extra/ps2frag.sh
+texlive-extra/pslatex.sh
+texlive-extra/texconfig-dialog.sh
+texlive-extra/texconfig-sys.sh
+texlive-extra/texconfig.sh
+texlive-extra/texlinks.sh
+texlive/fmtutil-sys.sh
+texlive/fmtutil-user.sh
+texlive/fmtutil.pl
+texlive/mktexlsr
+texlive/mktexmf
+texlive/mktexpk
+texlive/mktextfm
+texlive/rungs.tlu
+texlive/updmap-sys.sh
+texlive/updmap-user.sh
+texlive/updmap.pl
+texliveonfly/texliveonfly.py
+texloganalyser/texloganalyser
+texplate/texplate.sh
+thumbpdf/thumbpdf.pl
+typeoutfileinfo/typeoutfileinfo.sh
+xindex/xindex.lua
+xindy/texindy.pl
+xindy/xindy.pl
+"
+    install -m755 -d "$pkgdir/usr/bin"
+    for _script in ${_linked_scripts}; do
+        _scriptbase=$(basename $_script)
+        _scriptbase=${_scriptbase%.*}
+        ln -s /usr/share/texmf-dist/scripts/${_script} "${pkgdir}/usr/bin/${_scriptbase}"
+    done
+    ln -s /usr/share/texmf-dist/scripts/listings-ext/listings-ext.sh "${pkgdir}/usr/bin/listings-ext.sh"
+
+    # additional symlinks
+    ln -s allcm "${pkgdir}"/usr/bin/allec
+    ln -s cluttex "${pkgdir}"/usr/bin/cllualatex
+    ln -s cluttex "${pkgdir}"/usr/bin/clxelatex
+    ln -s epstopdf "${pkgdir}"/usr/bin/repstopdf
+    ln -s fmtutil "${pkgdir}"/usr/bin/mktexfmt
+    ln -s kpsetool "${pkgdir}"/usr/bin/kpsepath
+    ln -s kpsetool "${pkgdir}"/usr/bin/kpsexpand
+    ln -s luaotfload-tool "${pkgdir}"/usr/bin/mkluatexfontdb
+    ln -s mktexlsr "${pkgdir}"/usr/bin/texhash
+    ln -s pdfcrop "${pkgdir}"/usr/bin/rpdfcrop
+    ln -s texdef "${pkgdir}"/usr/bin/latexdef
+}

Deleted: mktexlsr.hook
===================================================================
--- mktexlsr.hook	2020-12-06 09:56:42 UTC (rev 402921)
+++ mktexlsr.hook	2020-12-06 09:56:49 UTC (rev 402922)
@@ -1,16 +0,0 @@
-[Trigger]
-Type = Path
-Operation = Install
-Operation = Upgrade
-Operation = Remove
-Target = usr/bin/mktexlsr
-Target = etc/texmf/*
-Target = usr/share/texmf/*
-Target = usr/share/texmf-dist/*
-Target = var/lib/texmf/*
-
-[Action]
-Description = Updating TeXLive filename database...
-When = PostTransaction
-Exec = /usr/share/libalpm/scripts/mktexlsr
-

Copied: texlive-core/repos/extra-any/mktexlsr.hook (from rev 402921, texlive-core/trunk/mktexlsr.hook)
===================================================================
--- mktexlsr.hook	                        (rev 0)
+++ mktexlsr.hook	2020-12-06 09:56:49 UTC (rev 402922)
@@ -0,0 +1,16 @@
+[Trigger]
+Type = Path
+Operation = Install
+Operation = Upgrade
+Operation = Remove
+Target = usr/bin/mktexlsr
+Target = etc/texmf/*
+Target = usr/share/texmf/*
+Target = usr/share/texmf-dist/*
+Target = var/lib/texmf/*
+
+[Action]
+Description = Updating TeXLive filename database...
+When = PostTransaction
+Exec = /usr/share/libalpm/scripts/mktexlsr
+

Deleted: mktexlsr.script
===================================================================
--- mktexlsr.script	2020-12-06 09:56:42 UTC (rev 402921)
+++ mktexlsr.script	2020-12-06 09:56:49 UTC (rev 402922)
@@ -1,12 +0,0 @@
-#!/bin/bash
-
-/usr/bin/mktexlsr
-(cd /etc/texmf && /usr/bin/mtxrun --generate >/dev/null)
-# We need to remove directory "." from luatex cache to avoid absurd
-# behaviour.
-for item in /var/lib/texmf/luatex-cache/context/*/trees/*.lua; do
-    if grep -F '["root"]="."' "$item" >/dev/null; then
-        rm -f "$item" "${item%.lua}.luc"
-    fi
-done
-

Copied: texlive-core/repos/extra-any/mktexlsr.script (from rev 402921, texlive-core/trunk/mktexlsr.script)
===================================================================
--- mktexlsr.script	                        (rev 0)
+++ mktexlsr.script	2020-12-06 09:56:49 UTC (rev 402922)
@@ -0,0 +1,12 @@
+#!/bin/bash
+
+/usr/bin/mktexlsr
+(cd /etc/texmf && /usr/bin/mtxrun --generate >/dev/null)
+# We need to remove directory "." from luatex cache to avoid absurd
+# behaviour.
+for item in /var/lib/texmf/luatex-cache/context/*/trees/*.lua; do
+    if grep -F '["root"]="."' "$item" >/dev/null; then
+        rm -f "$item" "${item%.lua}.luc"
+    fi
+done
+

Deleted: texlive-core.fmts
===================================================================
--- texlive-core.fmts	2020-12-06 09:56:42 UTC (rev 402921)
+++ texlive-core.fmts	2020-12-06 09:56:49 UTC (rev 402922)
@@ -1,35 +0,0 @@
-cont-en pdftex cont-usr.tex -8bit *cont-en.mkii
-cont-en xetex cont-usr.tex -8bit *cont-en.mkii
-#! cont-fr pdftex cont-usr.tex -8bit *cont-fr.mkii
-#! cont-it pdftex cont-usr.tex -8bit *cont-it.mkii
-#! cont-nl pdftex cont-usr.tex -8bit *cont-nl.mkii
-#! cont-ro pdftex cont-usr.tex -8bit *cont-ro.mkii
-cslatex pdftex - -etex cslatex.ini
-csplain pdftex - -etex -enc csplain-utf8.ini
-dvilualatex luatex language.dat,language.dat.lua dvilualatex.ini
-dviluatex luatex language.def,language.dat.lua dviluatex.ini
-etex pdftex language.def -translate-file=cp227.tcx *etex.ini
-latex pdftex language.dat -translate-file=cp227.tcx *latex.ini
-luacsplain luatex - -etex csplain.ini
-luahbtex luahbtex language.def,language.dat.lua luatex.ini
-luajithbtex luajithbtex language.def,language.dat.lua luatex.ini
-luajittex luajittex language.def,language.dat.lua luatex.ini
-lualatex luahbtex language.dat,language.dat.lua lualatex.ini
-luatex luatex language.def,language.dat.lua luatex.ini
-mex pdftex mexconf.tex -translate-file=cp227.tcx *mex.ini
-mf mf-nowin - -translate-file=cp227.tcx mf.ini
-#! mflua mflua-nowin - mf.ini
-mptopdf pdftex - -translate-file=cp227.tcx mptopdf.tex
-optex luatex hyphen-lan.opm optex.ini
-pdfcslatex pdftex - -etex cslatex.ini
-pdfcsplain luatex - -etex csplain.ini
-pdfcsplain pdftex - -etex -enc csplain-utf8.ini
-pdfcsplain xetex - -etex csplain.ini
-pdfetex pdftex language.def -translate-file=cp227.tcx *pdfetex.ini
-pdflatex pdftex language.dat -translate-file=cp227.tcx *pdflatex.ini
-pdfmex pdftex mexconf.tex -translate-file=cp227.tcx *pdfmex.ini
-pdftex pdftex language.def -translate-file=cp227.tcx *pdfetex.ini
-tex tex - tex.ini
-utf8mex pdftex mexconf.tex -enc *utf8mex.ini
-xelatex xetex language.dat -etex xelatex.ini
-xetex xetex language.def -etex xetex.ini

Copied: texlive-core/repos/extra-any/texlive-core.fmts (from rev 402921, texlive-core/trunk/texlive-core.fmts)
===================================================================
--- texlive-core.fmts	                        (rev 0)
+++ texlive-core.fmts	2020-12-06 09:56:49 UTC (rev 402922)
@@ -0,0 +1,35 @@
+cont-en pdftex cont-usr.tex -8bit *cont-en.mkii
+cont-en xetex cont-usr.tex -8bit *cont-en.mkii
+#! cont-fr pdftex cont-usr.tex -8bit *cont-fr.mkii
+#! cont-it pdftex cont-usr.tex -8bit *cont-it.mkii
+#! cont-nl pdftex cont-usr.tex -8bit *cont-nl.mkii
+#! cont-ro pdftex cont-usr.tex -8bit *cont-ro.mkii
+cslatex pdftex - -etex cslatex.ini
+csplain pdftex - -etex -enc csplain-utf8.ini
+dvilualatex luatex language.dat,language.dat.lua dvilualatex.ini
+dviluatex luatex language.def,language.dat.lua dviluatex.ini
+etex pdftex language.def -translate-file=cp227.tcx *etex.ini
+latex pdftex language.dat -translate-file=cp227.tcx *latex.ini
+luacsplain luatex - -etex csplain.ini
+luahbtex luahbtex language.def,language.dat.lua luatex.ini
+luajithbtex luajithbtex language.def,language.dat.lua luatex.ini
+luajittex luajittex language.def,language.dat.lua luatex.ini
+lualatex luahbtex language.dat,language.dat.lua lualatex.ini
+luatex luatex language.def,language.dat.lua luatex.ini
+mex pdftex mexconf.tex -translate-file=cp227.tcx *mex.ini
+mf mf-nowin - -translate-file=cp227.tcx mf.ini
+#! mflua mflua-nowin - mf.ini
+mptopdf pdftex - -translate-file=cp227.tcx mptopdf.tex
+optex luatex hyphen-lan.opm optex.ini
+pdfcslatex pdftex - -etex cslatex.ini
+pdfcsplain luatex - -etex csplain.ini
+pdfcsplain pdftex - -etex -enc csplain-utf8.ini
+pdfcsplain xetex - -etex csplain.ini
+pdfetex pdftex language.def -translate-file=cp227.tcx *pdfetex.ini
+pdflatex pdftex language.dat -translate-file=cp227.tcx *pdflatex.ini
+pdfmex pdftex mexconf.tex -translate-file=cp227.tcx *pdfmex.ini
+pdftex pdftex language.def -translate-file=cp227.tcx *pdfetex.ini
+tex tex - tex.ini
+utf8mex pdftex mexconf.tex -enc *utf8mex.ini
+xelatex xetex language.dat -etex xelatex.ini
+xetex xetex language.def -etex xetex.ini

Deleted: texlive-core.maps
===================================================================
--- texlive-core.maps	2020-12-06 09:56:42 UTC (rev 402921)
+++ texlive-core.maps	2020-12-06 09:56:49 UTC (rev 402922)
@@ -1,60 +0,0 @@
-Map      euler.map
-Map charter.map
-Map cs-charter.map
-Map csfonts.map
-Map dummy-space.map
-Map fpls.map
-Map garuda-c90.map
-Map l7x-urwvn.map
-Map lm.map
-Map marvosym.map
-Map mathpple.map
-Map norasi-c90.map
-Map original-context-symbol.map
-Map pazo.map
-Map pxfonts.map
-Map qag.map
-Map qbk.map
-Map qcr.map
-Map qcs.map
-Map qhv.map
-Map qpl.map
-Map qtm.map
-Map qzc.map
-Map tabvar.map
-Map troff-updmap.map
-Map txfonts.map
-Map uag.map
-Map ubk.map
-Map ucr.map
-Map uhv.map
-Map unc.map
-Map upl.map
-Map usy.map
-Map utm.map
-Map utopia.map
-Map uzc.map
-Map uzd.map
-MixedMap arss.map
-MixedMap artm.map
-MixedMap ccpl.map
-MixedMap cm-super-t1.map
-MixedMap cm-super-t2a.map
-MixedMap cm-super-t2b.map
-MixedMap cm-super-t2c.map
-MixedMap cm-super-ts1.map
-MixedMap cm-super-x2.map
-MixedMap cm.map
-MixedMap cmextra.map
-MixedMap cmtext-bsr-interpolated.map
-MixedMap cyrillic.map
-MixedMap eurosym.map
-MixedMap latxfont.map
-MixedMap manfnt.map
-MixedMap mflogo.map
-MixedMap plother.map
-MixedMap pltext.map
-MixedMap rsfs.map
-MixedMap symbols.map
-MixedMap tipa.map
-MixedMap wasy.map

Copied: texlive-core/repos/extra-any/texlive-core.maps (from rev 402921, texlive-core/trunk/texlive-core.maps)
===================================================================
--- texlive-core.maps	                        (rev 0)
+++ texlive-core.maps	2020-12-06 09:56:49 UTC (rev 402922)
@@ -0,0 +1,61 @@
+Map      euler.map
+Map charter.map
+Map cs-charter.map
+Map csfonts.map
+Map dummy-space.map
+Map fpls.map
+Map garuda-c90.map
+Map l7x-urwvn.map
+Map lm.map
+Map marvosym.map
+Map mathpple.map
+Map norasi-c90.map
+Map original-context-symbol.map
+Map pazo.map
+Map pxfonts.map
+Map qag.map
+Map qbk.map
+Map qcr.map
+Map qcs.map
+Map qhv.map
+Map qpl.map
+Map qtm.map
+Map qzc.map
+Map rojud.map
+Map tabvar.map
+Map troff-updmap.map
+Map txfonts.map
+Map uag.map
+Map ubk.map
+Map ucr.map
+Map uhv.map
+Map unc.map
+Map upl.map
+Map usy.map
+Map utm.map
+Map utopia.map
+Map uzc.map
+Map uzd.map
+MixedMap arss.map
+MixedMap artm.map
+MixedMap ccpl.map
+MixedMap cm-super-t1.map
+MixedMap cm-super-t2a.map
+MixedMap cm-super-t2b.map
+MixedMap cm-super-t2c.map
+MixedMap cm-super-ts1.map
+MixedMap cm-super-x2.map
+MixedMap cm.map
+MixedMap cmextra.map
+MixedMap cmtext-bsr-interpolated.map
+MixedMap cyrillic.map
+MixedMap eurosym.map
+MixedMap latxfont.map
+MixedMap manfnt.map
+MixedMap mflogo.map
+MixedMap plother.map
+MixedMap pltext.map
+MixedMap rsfs.map
+MixedMap symbols.map
+MixedMap tipa.map
+MixedMap wasy.map

Deleted: texlive-fmtutil.hook
===================================================================
--- texlive-fmtutil.hook	2020-12-06 09:56:42 UTC (rev 402921)
+++ texlive-fmtutil.hook	2020-12-06 09:56:49 UTC (rev 402922)
@@ -1,18 +0,0 @@
-[Trigger]
-Type = Package
-Operation = Install
-Operation = Upgrade
-Target = texlive-bin
-
-[Trigger]
-Type = File
-Operation = Install
-Operation = Upgrade
-Operation = Remove
-Target = var/lib/texmf/arch/installedpkgs/*.fmts
-
-[Action]
-Description = Updating TeXLive format files...
-When = PostTransaction
-Exec = /usr/share/libalpm/scripts/texlive-fmtutil
-

Copied: texlive-core/repos/extra-any/texlive-fmtutil.hook (from rev 402921, texlive-core/trunk/texlive-fmtutil.hook)
===================================================================
--- texlive-fmtutil.hook	                        (rev 0)
+++ texlive-fmtutil.hook	2020-12-06 09:56:49 UTC (rev 402922)
@@ -0,0 +1,18 @@
+[Trigger]
+Type = Package
+Operation = Install
+Operation = Upgrade
+Target = texlive-bin
+
+[Trigger]
+Type = File
+Operation = Install
+Operation = Upgrade
+Operation = Remove
+Target = var/lib/texmf/arch/installedpkgs/*.fmts
+
+[Action]
+Description = Updating TeXLive format files...
+When = PostTransaction
+Exec = /usr/share/libalpm/scripts/texlive-fmtutil
+

Deleted: texlive-fmtutil.script
===================================================================
--- texlive-fmtutil.script	2020-12-06 09:56:42 UTC (rev 402921)
+++ texlive-fmtutil.script	2020-12-06 09:56:49 UTC (rev 402922)
@@ -1,19 +0,0 @@
-#!/bin/bash
-
-FMTUTIL="etc/texmf/web2c/fmtutil.cnf"
-FMTUTILLOCAL="etc/texmf/web2c/fmtutil-local.cnf"
-
-cp usr/share/texmf-dist/web2c/fmtutil-hdr.cnf $FMTUTIL
-for file in var/lib/texmf/arch/installedpkgs/*.fmts; do
-    echo >> $FMTUTIL
-    echo "# $file" >> $FMTUTIL
-    cat $file >> $FMTUTIL
-done
-if [[ -f "$FMTUTILLOCAL" ]]; then
-    echo >> $FMTUTIL
-    echo "# $FMTUTILLOCAL" >> $FMTUTIL
-    cat "$FMTUTILLOCAL" >> $FMTUTIL
-fi
-
-/usr/bin/fmtutil-sys --all --cnffile $FMTUTIL > /dev/null
-

Copied: texlive-core/repos/extra-any/texlive-fmtutil.script (from rev 402921, texlive-core/trunk/texlive-fmtutil.script)
===================================================================
--- texlive-fmtutil.script	                        (rev 0)
+++ texlive-fmtutil.script	2020-12-06 09:56:49 UTC (rev 402922)
@@ -0,0 +1,19 @@
+#!/bin/bash
+
+FMTUTIL="etc/texmf/web2c/fmtutil.cnf"
+FMTUTILLOCAL="etc/texmf/web2c/fmtutil-local.cnf"
+
+cp usr/share/texmf-dist/web2c/fmtutil-hdr.cnf $FMTUTIL
+for file in var/lib/texmf/arch/installedpkgs/*.fmts; do
+    echo >> $FMTUTIL
+    echo "# $file" >> $FMTUTIL
+    cat $file >> $FMTUTIL
+done
+if [[ -f "$FMTUTILLOCAL" ]]; then
+    echo >> $FMTUTIL
+    echo "# $FMTUTILLOCAL" >> $FMTUTIL
+    cat "$FMTUTILLOCAL" >> $FMTUTIL
+fi
+
+/usr/bin/fmtutil-sys --all --cnffile $FMTUTIL > /dev/null
+

Deleted: texlive-updmap.hook
===================================================================
--- texlive-updmap.hook	2020-12-06 09:56:42 UTC (rev 402921)
+++ texlive-updmap.hook	2020-12-06 09:56:49 UTC (rev 402922)
@@ -1,13 +0,0 @@
-[Trigger]
-Type = Path
-Operation = Install
-Operation = Upgrade
-Operation = Remove
-Target = usr/bin/tex
-Target = var/lib/texmf/arch/installedpkgs/*.maps
-
-[Action]
-Description = Updating TeXLive font maps...
-When = PostTransaction
-Exec = /usr/share/libalpm/scripts/texlive-updmap
-

Copied: texlive-core/repos/extra-any/texlive-updmap.hook (from rev 402921, texlive-core/trunk/texlive-updmap.hook)
===================================================================
--- texlive-updmap.hook	                        (rev 0)
+++ texlive-updmap.hook	2020-12-06 09:56:49 UTC (rev 402922)
@@ -0,0 +1,13 @@
+[Trigger]
+Type = Path
+Operation = Install
+Operation = Upgrade
+Operation = Remove
+Target = usr/bin/tex
+Target = var/lib/texmf/arch/installedpkgs/*.maps
+
+[Action]
+Description = Updating TeXLive font maps...
+When = PostTransaction
+Exec = /usr/share/libalpm/scripts/texlive-updmap
+

Deleted: texlive-updmap.script
===================================================================
--- texlive-updmap.script	2020-12-06 09:56:42 UTC (rev 402921)
+++ texlive-updmap.script	2020-12-06 09:56:49 UTC (rev 402922)
@@ -1,15 +0,0 @@
-#!/bin/bash
-
-UPDMAP="etc/texmf/web2c/updmap.cfg"
-UPDMAPLOCAL="etc/texmf/web2c/updmap-local.cfg"
-
-cp usr/share/texmf-dist/web2c/updmap-hdr.cfg $UPDMAP
-cat var/lib/texmf/arch/installedpkgs/*.maps >> $UPDMAP
-if [[ -f "$UPDMAPLOCAL" ]]; then
-    cat "$UPDMAPLOCAL" >> $UPDMAP
-fi
-
-# Run mktexlsr since /etc/texmf/web2c/updmap.cfg can be a new file
-/usr/bin/mktexlsr
-/usr/bin/updmap-sys --quiet --nohash
-

Copied: texlive-core/repos/extra-any/texlive-updmap.script (from rev 402921, texlive-core/trunk/texlive-updmap.script)
===================================================================
--- texlive-updmap.script	                        (rev 0)
+++ texlive-updmap.script	2020-12-06 09:56:49 UTC (rev 402922)
@@ -0,0 +1,15 @@
+#!/bin/bash
+
+UPDMAP="etc/texmf/web2c/updmap.cfg"
+UPDMAPLOCAL="etc/texmf/web2c/updmap-local.cfg"
+
+cp usr/share/texmf-dist/web2c/updmap-hdr.cfg $UPDMAP
+cat var/lib/texmf/arch/installedpkgs/*.maps >> $UPDMAP
+if [[ -f "$UPDMAPLOCAL" ]]; then
+    cat "$UPDMAPLOCAL" >> $UPDMAP
+fi
+
+# Run mktexlsr since /etc/texmf/web2c/updmap.cfg can be a new file
+/usr/bin/mktexlsr
+/usr/bin/updmap-sys --quiet --nohash
+

Deleted: texlive.install
===================================================================
--- texlive.install	2020-12-06 09:56:42 UTC (rev 402921)
+++ texlive.install	2020-12-06 09:56:49 UTC (rev 402922)
@@ -1,12 +0,0 @@
-post_install() {
-    echo ">>> updmap custom entries should go into /etc/texmf/web2c/updmap-local.cfg"
-    echo ">>> fmtutil custom entries should go into /etc/texmf/web2c/fmtutil-local.cnf"
-    echo "NB: To setup ConTeXt and the lua(la)tex font db,"
-    echo "    see http://wiki.archlinux.org/index.php/TeX_Live"
-}
-
-post_upgrade() {
-    echo ">>> updmap custom entries should go into /etc/texmf/web2c/updmap-local.cfg"
-    echo ">>> fmtutil custom entries should go into /etc/texmf/web2c/fmtutil-local.cnf"
-}
-

Copied: texlive-core/repos/extra-any/texlive.install (from rev 402921, texlive-core/trunk/texlive.install)
===================================================================
--- texlive.install	                        (rev 0)
+++ texlive.install	2020-12-06 09:56:49 UTC (rev 402922)
@@ -0,0 +1,12 @@
+post_install() {
+    echo ">>> updmap custom entries should go into /etc/texmf/web2c/updmap-local.cfg"
+    echo ">>> fmtutil custom entries should go into /etc/texmf/web2c/fmtutil-local.cnf"
+    echo "NB: To setup ConTeXt and the lua(la)tex font db,"
+    echo "    see http://wiki.archlinux.org/index.php/TeX_Live"
+}
+
+post_upgrade() {
+    echo ">>> updmap custom entries should go into /etc/texmf/web2c/updmap-local.cfg"
+    echo ">>> fmtutil custom entries should go into /etc/texmf/web2c/fmtutil-local.cnf"
+}
+

Deleted: texmf.cnf
===================================================================
--- texmf.cnf	2020-12-06 09:56:42 UTC (rev 402921)
+++ texmf.cnf	2020-12-06 09:56:49 UTC (rev 402922)
@@ -1,823 +0,0 @@
-% texmf.cnf for TeXLive/Arch Linux -- runtime path configuration file for kpathsea.
-% Public domain.
-% 
-% If you modify this original file, YOUR CHANGES WILL BE LOST when it is
-% updated.  Instead, put your changes -- and only your changes, not an
-% entire copy! -- in ../../texmf.cnf.  That is, if this file is
-% installed in /some/path/to/texlive/2018/texmf-dist/web2c/texmf.cnf,
-% add your custom settings to /some/path/to/texlive/2018/texmf.cnf.
-% 
-% What follows is a super-summary of what this .cnf file can
-% contain. Please read the Kpathsea manual for more information.
-%
-% Each statement in this file boils down to:
-%   <variable>[.<program>] [=] <value>
-%
-% Neither the <variable> nor the <value> may be empty.
-% Any identifier (sticking to A-Za-z_ for names is safest) can be assigned.
-% The `=' (and surrounding spaces) is optional.
-% $foo (or ${foo}) in a value expands to the envvar or cnf value of foo.
-% Lines can be continued with a \; no whitespace removal is done.
-%
-% Earlier entries (in the same or another file) override later ones, and
-% an environment variable foo overrides any texmf.cnf definition of foo.
-%
-% All definitions are read before anything is expanded, so you can use
-% variables before they are defined.
-%
-% If a variable assignment is qualified with `.PROGRAM', it is ignored
-% unless the current executable (last filename component of argv[0]) is
-% named PROGRAM.  This foo.PROGRAM construct is not recognized on the
-% right-hand side. For environment variables, use FOO_PROGRAM.
-%
-% Which file formats use which paths for searches is described in the
-% various programs' and the Kpathsea documentation (http://tug.org/kpathsea).
-%
-% // means to search subdirectories (recursively).
-% A leading !! means to look only in the ls-R db, never on the disk.
-% In this file, either ; or : can be used to separate path components.
-% A leading/trailing/doubled path separator in the paths will be
-%   expanded into the compile-time default. Probably not what you want.
-%
-% Brace notation is supported, for example: /usr/local/{mytex,othertex}
-% expands to /usr/local/mytex:/usr/local/othertex.
-
-
-% 
 Part 1: Search paths and directories.
-
-% This is the parent directory of our several trees, i.e.,
-% /usr/local/texlive/YYYY in the original TeX Live distribution.
-%
-% The path definitions here assume the directories are organized
-% according to the TeX Directory Structure (http://tug.org/tds).
-%
-% Redistributors will probably want $SELFAUTODIR/share, i.e., /usr/share.
-% Kpathsea sets (in kpathsea/progname.c):
-% SELFAUTOLOC (directory of the binary=/usr/local/texlive/YYYY/bin/i386-linux),
-% SELFAUTODIR (its parent = /usr/local/texlive/YYYY/bin), 
-% SELFAUTOPARENT (its grandparent = /usr/local/texlive/YYYY), and
-% SELFAUTOGRANDPARENT (its great-grandparent = /usr/local/texlive).
-% Sorry for the off-by-one-generation names.
-TEXMFROOT = $SELFAUTODIR/share
-
-% The main tree of distributed packages and programs:
-TEXMFDIST = $TEXMFROOT/texmf-dist
-
-% We used to have a separate /texmf tree with some core programs and files.
-% Keep the variable name.
-TEXMFMAIN = $TEXMFDIST
-
-% Local additions to the distribution trees.
-TEXMFLOCAL = /usr/local/share/texmf;/usr/share/texmf
-
-% TEXMFSYSVAR, where *-sys store cached runtime data.
-TEXMFSYSVAR = /var/lib/texmf
-
-% TEXMFSYSCONFIG, where *-sys store configuration data.
-TEXMFSYSCONFIG = /etc/texmf
-
-% Per-user texmf tree(s) -- organized per the TDS, as usual.  To define
-% more than one per-user tree, set this to a list of directories in
-% braces, as described above.  (This used to be HOMETEXMF.)  ~ expands
-% to %USERPROFILE% on Windows, $HOME otherwise.
-TEXMFHOME = ~/texmf
-
-% TEXMFVAR, where texconfig/updmap/fmtutil store cached runtime data.
-TEXMFVAR = ~/.texlive/texmf-var
-
-% TEXMFCONFIG, where texconfig/updmap/fmtutil store configuration data.
-TEXMFCONFIG = ~/.texlive/texmf-config
-
-% This is the value manipulated by tlmgr's auxtrees subcommand in the
-% root texmf.cnf. Kpathsea warns about a literally empty string for a
-% value, hence the empty braces.
-TEXMFAUXTREES = {}
-
-% List all the texmf trees. For an explanation of what they are, see the
-% TeX Live manual.
-%
-% For texconfig to work properly, TEXMFCONFIG and TEXMFVAR should be named
-% explicitly and before other trees.
-% 
-% TEXMFLOCAL precedes TEXMFDIST because locally-installed versions
-% should take precedence over distribution files -- although it is
-% generally a source of confusion to have different versions of a
-% package installed, whatever the trees, so try to avoid it.
-% 
-% The odd-looking $TEXMFAUXTREES$TEXMF... construct is so that if no auxtree is
-% ever defined (the 99% common case), no extra elements will be added to
-% the search paths. tlmgr takes care to end any value with a trailing comma.
-TEXMF = {$TEXMFCONFIG,$TEXMFVAR,$TEXMFHOME,!!$TEXMFSYSCONFIG,!!$TEXMFSYSVAR,!!$TEXMFLOCAL,!!$TEXMFDIST}
-
-% Where to look for ls-R files.  There need not be an ls-R in the
-% directories in this path, but if there is one, Kpathsea will use it.
-% By default, this is only the !! elements of TEXMF, so that mktexlsr
-% does not create ls-R files in the non-!! elements -- because if an
-% ls-R is present, it will be used, and the disk will not be searched.
-% This is arguably a bug in kpathsea.
-TEXMFDBS = {!!$TEXMFLOCAL,!!$TEXMFSYSCONFIG,!!$TEXMFSYSVAR,!!$TEXMFDIST}
-
-% The system trees.  These are the trees that are shared by all users.
-% If a tree appears in this list, the mktex* scripts will use
-% VARTEXFONTS for generated files, if the original tree isn't writable;
-% otherwise the current working directory is used.
-SYSTEXMF = $TEXMFSYSVAR;$TEXMFLOCAL;$TEXMFDIST
-
-% First writable tree here is used by Lua(La)TeX for the font cache.
-% LuaLaTeX uses the value here, while ConTeXt uses the same variable but
-% from texmfcnf.lua; therefore the two values should be kept in sync.
-% (As should everything else in texmf.cnf <-> texmfcnf.lua.)
-TEXMFCACHE = $TEXMFSYSVAR;$TEXMFVAR
-
-% Where generated fonts may be written.  This tree is used when the sources
-% were found in a system tree and either that tree wasn't writable, or the
-% varfonts feature was enabled in MT_FEATURES in mktex.cnf.
-VARTEXFONTS = $TEXMFVAR/fonts
-
-% On some systems, there will be a system tree which contains all the font
-% files that may be created as well as the formats.  For example
-%   TEXMFVAR = /var/lib/texmf
-% is used in many distros.  In this case, set VARTEXFONTS like this
-%VARTEXFONTS = $TEXMFVAR/fonts
-% and do not mention it in TEXMFDBS (but _do_ mention TEXMFVAR).
-%
-% Remove $VARTEXFONTS from TEXMFDBS if the VARTEXFONTS directory is below
-% one of the TEXMF directories (avoids overlapping ls-R files).
-
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-% Usually you will not need to edit any of the following variables.
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-% WEB2C is for Web2C specific files.  The current directory may not be
-% a good place to look for them.
-WEB2C = $TEXMF/web2c
-
-% TEXINPUTS is for TeX input files -- i.e., anything to be found by \input
-% or \openin, including .sty, .eps, etc.  We specify paths for all known
-% formats, past or present.  Not all of them are built these days.
-
-% Plain TeX.  Have the command tex check all directories as a last
-% resort, we may have plain-compatible stuff anywhere.
-TEXINPUTS.tex           = .;$TEXMF/tex/{plain,generic,}//
-
-% Fontinst needs to read afm files.
-TEXINPUTS.fontinst      = .;$TEXMF/{tex,fonts/afm}//
-
-% Other plain-based formats.
-TEXINPUTS.amstex        = .;$TEXMF/tex/{amstex,plain,generic,}//
-TEXINPUTS.csplain       = .;$TEXMF/tex/{csplain,plain,generic,}//
-TEXINPUTS.eplain        = .;$TEXMF/tex/{eplain,plain,generic,}//
-TEXINPUTS.ftex          = .;$TEXMF/tex/{formate,plain,generic,}//
-TEXINPUTS.mex           = .;$TEXMF/tex/{mex,plain,generic,}//
-TEXINPUTS.texinfo       = .;$TEXMF/tex/{texinfo,plain,generic,}//
-
-% LaTeX 2e specific macros are stored in latex/, macros that can only be
-% used with 2.09 in latex209/.  In addition, we look in the directory
-% latex209, useful for macros that were written for 2.09 and do not
-% mention 2e at all, but can be used with 2e.
-TEXINPUTS.cslatex       = .;$TEXMF/tex/{cslatex,csplain,latex,generic,}//
-TEXINPUTS.latex         = .;$TEXMF/tex/{latex,generic,}//
-TEXINPUTS.latex209      = .;$TEXMF/tex/{latex209,generic,latex,}//
-TEXINPUTS.olatex        = .;$TEXMF/tex/{latex,generic,}//
-
-% MLTeX.
-TEXINPUTS.frlatex       = .;$TEXMF/tex/{french,latex,generic,}//
-TEXINPUTS.frtex         = .;$TEXMF/tex/{french,plain,generic,}//
-TEXINPUTS.mllatex       = .;$TEXMF/tex/{latex,generic,}//
-TEXINPUTS.mltex         = .;$TEXMF/tex/{plain,generic,}//
-
-% e-TeX.
-TEXINPUTS.elatex        = .;$TEXMF/tex/{latex,generic,}//
-TEXINPUTS.etex          = .;$TEXMF/tex/{plain,generic,}//
-
-% pdfTeX.
-TEXINPUTS.pdfcslatex    = .;$TEXMF/tex/{cslatex,csplain,latex,generic,}//
-TEXINPUTS.pdfcsplain    = .;$TEXMF/tex/{csplain,plain,generic,}//
-TEXINPUTS.pdflatex      = .;$TEXMF/tex/{latex,generic,}//
-TEXINPUTS.pdfmex        = .;$TEXMF/tex/{mex,plain,generic,}//
-TEXINPUTS.utf8mex       = .;$TEXMF/tex/{mex,plain,generic,}//
-TEXINPUTS.pdftex        = .;$TEXMF/tex/{plain,generic,}//
-TEXINPUTS.pdftexinfo    = .;$TEXMF/tex/{texinfo,plain,generic,}//
-TEXINPUTS.pdfamstex     = .;$TEXMF/tex/{amstex,plain,generic,}//
-
-% pdfeTeX.
-TEXINPUTS.pdfelatex     = .;$TEXMF/tex/{latex,generic,}//
-TEXINPUTS.pdfetex       = .;$TEXMF/tex/{plain,generic,}//
-
-% LuaTeX.
-TEXINPUTS.luatex        = .;$TEXMF/tex/{luatex,plain,generic,}//
-TEXINPUTS.luajittex     = .;$TEXMF/tex/{luatex,plain,generic,}//
-TEXINPUTS.dviluatex     = .;$TEXMF/tex/{luatex,plain,generic,}//
-TEXINPUTS.lualatex      = .;$TEXMF/tex/{lualatex,latex,luatex,generic,}//
-TEXINPUTS.luajitlatex   = .;$TEXMF/tex/{lualatex,latex,luatex,generic,}//
-TEXINPUTS.dvilualatex   = .;$TEXMF/tex/{lualatex,latex,luatex,generic,}//
-
-% XeTeX.
-TEXINPUTS.xelatex       = .;$TEXMF/tex/{xelatex,latex,xetex,generic,}//
-TEXINPUTS.xeplain       = .;$TEXMF/tex/{xeplain,eplain,plain,xetex,generic,}//
-TEXINPUTS.xetex         = .;$TEXMF/tex/{xetex,plain,generic,}//
-
-% Omega / Aleph.
-TEXINPUTS.aleph         = .;$TEXMF/tex/{plain,generic,}//
-TEXINPUTS.elambda       = .;$TEXMF/tex/{lambda,latex,generic,}//
-TEXINPUTS.eomega        = .;$TEXMF/tex/{plain,generic,}//
-TEXINPUTS.lambda        = .;$TEXMF/tex/{lambda,latex,generic,}//
-TEXINPUTS.lamed         = .;$TEXMF/tex/{lambda,latex,generic,}//
-TEXINPUTS.omega         = .;$TEXMF/tex/{plain,generic,}//
-
-% p(La)TeX.
-TEXINPUTS.ptex          = .;$TEXMF/tex/{ptex,plain,generic,}//
-TEXINPUTS.platex        = .;$TEXMF/tex/{platex,latex,generic,}//
-
-% epTeX, and for pmpost.
-TEXINPUTS.eptex         = .;$TEXMF/tex/{ptex,plain,generic,}//
-TEX.pmpost = eptex
-
-% p(La)TeX-ng
-TEXINPUTS.ptex-ng   = .;$TEXMF/tex/{uptex,ptex,plain,generic,}//
-TEXINPUTS.platex-ng = .;$TEXMF/tex/{uplatex,platex,latex,generic,}//
-
-% (e)up(La)TeX, and for upmpost
-TEXINPUTS.uplatex = .;$TEXMF/tex/{uplatex,platex,latex,generic,}//
-TEXINPUTS.uptex   = .;$TEXMF/tex/{uptex,ptex,plain,generic,}//
-TEXINPUTS.euptex  = .;$TEXMF/tex/{uptex,ptex,plain,generic,}//
-TEX.upmpost = euptex
-
-% pBibTeX bibliographies and style files.
-BIBINPUTS.pbibtex       = .;$TEXMF/{pbibtex,bibtex}/bib//
-BSTINPUTS.pbibtex       = .;$TEXMF/{pbibtex,bibtex}/bst//
-
-% upBibTeX bibliographies and style files.
-BIBINPUTS.upbibtex      = .;$TEXMF/{upbibtex,pbibtex,bibtex}/bib//
-BSTINPUTS.upbibtex      = .;$TEXMF/{upbibtex,pbibtex,bibtex}/bst//
-
-% ConTeXt.
-TEXINPUTS.context       = .;$TEXMF/tex/{context,plain,generic,}//
-
-% jadetex.
-TEXINPUTS.jadetex       = .;$TEXMF/tex/{jadetex,latex,generic,}//
-TEXINPUTS.pdfjadetex    = .;$TEXMF/tex/{jadetex,latex,generic,}//
-
-% XMLTeX.
-TEXINPUTS.xmltex        = .;$TEXMF/tex/{xmltex,latex,generic,}//
-TEXINPUTS.pdfxmltex     = .;$TEXMF/tex/{xmltex,latex,generic,}//
-
-% Miscellany, no longer built.
-TEXINPUTS.lamstex       = .;$TEXMF/tex/{lamstex,plain,generic,}//
-TEXINPUTS.lollipop      = .;$TEXMF/tex/{lollipop,plain,generic,}//
-TEXINPUTS.frpdflatex    = .;$TEXMF/tex/{french,latex,generic,}//
-TEXINPUTS.frpdftex      = .;$TEXMF/tex/{french,plain,generic,}//
-
-% Earlier entries override later ones, so put this generic one last.
-TEXINPUTS               = .;$TEXMF/tex/{$progname,generic,}//
-
-% ttf2tfm.
-TTF2TFMINPUTS =                 .;$TEXMF/ttf2pk//
-
-% Metafont, MetaPost inputs.
-MFINPUTS = .;$TEXMF/metafont//;{$TEXMF/fonts,$VARTEXFONTS}/source//
-MPINPUTS = .;$TEXMF/metapost//
-
-% Dump files (fmt/base/mem) for vir{tex,mf,mp} to read.
-% We want to find the engine-specific file, e.g., cont-en.fmt can
-% exist under both pdftex/ and xetex/.  But just in case some formats
-% end up without an engine directory, look directly in web2c/ too.
-% We repeat the same definition three times because of the way fmtutil
-% is implemented; if we use ${TEXFORMATS}, the mpost/mf/etc. formats
-% will not be found.
-TEXFORMATS = .;$TEXMF/web2c{/$engine,}
-MFBASES = .;$TEXMF/web2c{/$engine,}
-MPMEMS = .;$TEXMF/web2c{/$engine,}
-%
-% As of 2008, pool files don't exist any more (the strings are compiled
-% into the binaries), but just in case something expects to find these:
-TEXPOOL = .;$TEXMF/web2c
-MFPOOL = ${TEXPOOL}
-MPPOOL = ${TEXPOOL}
-
-% support the original xdvi.  Must come before the generic settings.
-PKFONTS.XDvi   = .;$TEXMF/%s;$VARTEXFONTS/pk/{%m,modeless}//
-VFFONTS.XDvi   = .;$TEXMF/%s
-PSHEADERS.XDvi = .;$TEXMF/%q{dvips,fonts/type1}//
-TEXPICTS.XDvi  = .;$TEXMF/%q{dvips,tex}//
-
-% Device-independent font metric files.
-VFFONTS = .;$TEXMF/fonts/vf//
-TFMFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/tfm//
-
-% The $MAKETEX_MODE below means the drivers will not use a cx font when
-% the mode is ricoh.  If no mode is explicitly specified, kpse_prog_init
-% sets MAKETEX_MODE to /, so all subdirectories are searched.  See the manual.
-% The modeless part guarantees that bitmaps for PostScript fonts are found.
-PKFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/pk/{$MAKETEX_MODE,modeless}//
-
-% Similarly for the GF format, which only remains in existence because
-% Metafont outputs it (and MF isn't going to change).
-GFFONTS = .;$TEXMF/fonts/gf/$MAKETEX_MODE//
-
-% A backup for PKFONTS and GFFONTS. Not used for anything.
-GLYPHFONTS = .;$TEXMF/fonts
-
-% A place to puth everything that doesn't fit the other font categories.
-MISCFONTS = .;$TEXMF/fonts/misc//
-
-% font name map files.  This isn't just fonts/map// because ConTeXt
-% wants support for having files with the same name in the different
-% subdirs.  Maybe if the programs ever get unified to accepting the same
-% map file syntax the definition can be simplified again.
-TEXFONTMAPS = .;$TEXMF/fonts/map/{$progname,pdftex,dvips,}//
-
-% BibTeX bibliographies and style files.  bibtex8 also uses these.
-BIBINPUTS = .;$TEXMF/bibtex/bib//
-BSTINPUTS = .;$TEXMF/bibtex/{bst,csf}//
-
-% MlBibTeX.
-MLBIBINPUTS = .;$TEXMF/bibtex/bib/{mlbib,}//
-MLBSTINPUTS = .;$TEXMF/bibtex/{mlbst,bst}//
-
-% .ris and .bltxml bibliography formats.
-RISINPUTS = .;$TEXMF/biber/ris//
-BLTXMLINPUTS = .;$TEXMF/biber/bltxml//
-
-% MFT style files.
-MFTINPUTS = .;$TEXMF/mft//
-
-% PostScript headers and prologues (.pro); unfortunately, some programs
-% also use this for acessing font files (enc, type1, truetype)
-TEXPSHEADERS = .;$TEXMF/{dvips,fonts/{enc,type1,type42,type3}}//
-TEXPSHEADERS.gsftopk = .;$TEXMF/{dvips,fonts/{enc,type1,type42,type3,truetype}}//
-
-% OSFONTDIR is to provide a convenient hook for allowing TeX to find
-% fonts installed on the system (outside of TeX).  An empty default
-% value would add "//" to the search paths, so we give it a dummy value.
-% OSFONTDIR = /usr/share/fonts
-
-% PostScript Type 1 outline fonts.
-T1FONTS = .;$TEXMF/fonts/type1//;$OSFONTDIR//
-
-% PostScript AFM metric files.
-AFMFONTS = .;$TEXMF/fonts/afm//;$OSFONTDIR//
-
-% TrueType outline fonts.
-TTFONTS = .;$TEXMF/fonts/{truetype,opentype}//;$OSFONTDIR//
-
-% OpenType outline fonts.
-OPENTYPEFONTS = .;$TEXMF/fonts/{opentype,truetype}//;$OSFONTDIR//
-
-% Type 42 outline fonts.
-T42FONTS = .;$TEXMF/fonts/type42//
-
-% Ligature definition files.
-LIGFONTS =  .;$TEXMF/fonts/lig//
-
-% Dvips' config.* files (this name should not start with `TEX'!).
-TEXCONFIG = $TEXMF/dvips//
-
-% Makeindex style (.ist) files.
-INDEXSTYLE = .;$TEXMF/makeindex//
-
-% mendex dictionary files. Used internally by mendex and upmendex.
-% It is not necessary to introduce a new format in Kpathsea.
-INDEXDICTIONARY = .;$TEXMF/makeindex//
-
-% Font encoding files (.enc).
-ENCFONTS = .;$TEXMF/fonts/enc//
-
-% CMap files.
-CMAPFONTS = .;$TEXMF/fonts/cmap//
-
-% Subfont definition files.
-SFDFONTS = .;$TEXMF/fonts/sfd//
-
-% OpenType feature files (.fea).
-FONTFEATURES=.;$TEXMF/fonts/fea//
-
-% .cid and .cidmap
-FONTCIDMAPS=.;$TEXMF/fonts/cid//
-
-% pdftex config files:
-PDFTEXCONFIG = .;$TEXMF/pdftex/{$progname,}//
-
-% Used by DMP (ditroff-to-mpx), called by makempx -troff.
-TRFONTS = /usr{/local,}/share/groff/{current/font,site-font}/devps
-MPSUPPORT = .;$TEXMF/metapost/support
-
-% For xdvi to find mime.types and .mailcap, if they do not exist in
-% ~.  These are single directories, not paths.
-% (But the default mime.types, at least, may well suffice.)
-MIMELIBDIR = /etc
-MAILCAPLIBDIR = /etc
-
-% Default settings for the fontconfig library as used by the Windows
-% versions of xetex/xdvipdfmx.  Not used by xetex on Unixish systems.
-% ConTeXT MkIV (all platforms) also use these values.
-% 
-FONTCONFIG_FILE = fonts.conf
-FONTCONFIG_PATH = $TEXMFSYSVAR/fonts/conf
-FC_CACHEDIR = $TEXMFSYSVAR/fonts/cache
-
-% TeX documentation and source files, for use with texdoc and kpsewhich.
-TEXDOCS = $TEXMF/doc//
-TEXSOURCES = .;$TEXMF/source//
-
-% Web and CWeb input paths.
-WEBINPUTS = .;$TEXMF/web//
-CWEBINPUTS = .;$TEXMF/cweb//
-
-% Omega-related fonts and other files.
-OFMFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/{ofm,tfm}//
-OPLFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/opl//
-OVFFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/{ovf,vf}//
-OVPFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/ovp//
-OTPINPUTS = .;$TEXMF/omega/otp//
-OCPINPUTS = .;$TEXMF/omega/ocp//
-
-% Some additional input variables for several programs.  If you add
-% a program that uses the `other text files' or `other binary files'
-% search formats, you'll want to add their variables here as well.
-T4HTINPUTS   = .;$TEXMF/tex4ht//
-
-%% t4ht utility, sharing files with TeX4ht
-TEX4HTFONTSET=alias,iso8859,unicode
-TEX4HTINPUTS = .;$TEXMF/tex4ht/base//;$TEXMF/tex4ht/ht-fonts/{$TEX4HTFONTSET}//
-
-% TeXworks editor configuration and settings
-TW_LIBPATH = $TEXMFCONFIG/texworks
-TW_INIPATH = $TW_LIBPATH
-
-% For security, do not look in . for dvipdfmx.cfg, since the D option
-% would allow command execution.
-DVIPDFMXINPUTS = $TEXMF/dvipdfmx
-
-% Lua needs to look in TEXINPUTS for lua scripts distributed with packages.
-% 
-% But we can't simply use $TEXINPUTS, since then if TEXINPUTS is set in
-% the environment with a colon, say, TEXINPUTS=/some/dir:, the intended
-% default expansion of TEXINPUTS will not happen and .lua files under
-% the /tex/ will not be found.
-% 
-% So, duplicate the TEXINPUTS.*lualatex values as LUAINPUTS.*lualatex.
-% The default LUAINPUTS suffices for luatex and dviluatex.
-%
-LUAINPUTS.lualatex = .;$TEXMF/scripts/{$progname,$engine,}/{lua,}//;$TEXMF/tex/{lualatex,latex,luatex,generic,}//
-LUAINPUTS.dvilualatex = .;$TEXMF/scripts/{$progname,$engine,}/{lua,}//;$TEXMF/tex/{lualatex,latex,luatex,generic,}//
-LUAINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/{lua,}//;$TEXMF/tex/{luatex,plain,generic,}//
-
-% Lua needs to look for binary lua libraries distributed with packages.
-CLUAINPUTS = .;$SELFAUTOLOC/lib/{$progname,$engine,}/lua//
-
-% Architecture independent executables.
-TEXMFSCRIPTS = $TEXMF/scripts/{$progname,$engine,}//
-
-% Other languages.
-JAVAINPUTS   = .;$TEXMF/scripts/{$progname,$engine,}/java//
-PERLINPUTS   = .;$TEXMF/scripts/{$progname,$engine,}/perl//
-PYTHONINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/python//
-RUBYINPUTS   = .;$TEXMF/scripts/{$progname,$engine,}/ruby//
-
-
-%% The mktex* scripts rely on KPSE_DOT. Do not set it in the environment.
-% KPSE_DOT = .
-
-% This definition isn't used from this .cnf file itself (that would be
-% paradoxical), but the compile-time default in paths.h is built from it.
-% The SELFAUTO* variables are set automatically from the location of
-% argv[0], in kpse_set_program_name.
-% 
-% This main texmf.cnf file is installed, for a release YYYY, in a
-% directory such as /usr/local/texlive/YYYY/texmf-dist/web2c/texmf.cnf.
-% Since this file is subject to future updates, the TeX Live installer
-% or human administrator may also create a file
-% /usr/local/texlive/YYYY/texmf.cnf; any settings in this latter file
-% will take precedence over the distributed one.
-% 
-% For security reasons, it is best not to include . in this path.
-%
-% The idea behind this lengthy definition: for each of
-% SELFAUTO{LOC,DIR,PARENT}, look in the directory,
-% then the subdirectories share/texmf-local, share/texmf-dist, share/texmf,
-% then the subdirectories ./texmf-local, texmf-dist, ./texmf.
-% At any given installation, most of these directories will not exist,
-% but they all turn out to be useful somewhere.
-% 
-% Special addition -- we want to include one more directory: the
-% great-grandparent's texmf-local, because that is how TL is installed
-% by default.  That is, given a binary
-% /usr/local/texlive/YYYY/bin/PLATFORM/kpsewhich, it should find
-% /usr/local/texlive/texmf-local/web2c/texmf.cnf.  I.e., not under YYYY.
-% 
-% As a result, we cannot use actual brace expansion in the definition,
-% since we don't want to scatter ../'s throughout the value.  Hence we
-% explicitly list every directory.  Arguably more understandable anyway.
-%
-TEXMFCNF = {\
-$SELFAUTOLOC,\
-$SELFAUTOLOC/share/texmf-local/web2c,\
-$SELFAUTOLOC/share/texmf-dist/web2c,\
-$SELFAUTOLOC/share/texmf/web2c,\
-$SELFAUTOLOC/texmf-local/web2c,\
-$SELFAUTOLOC/texmf-dist/web2c,\
-$SELFAUTOLOC/texmf/web2c,\
-\
-$SELFAUTODIR,\
-$SELFAUTODIR/share/texmf-local/web2c,\
-$SELFAUTODIR/share/texmf-dist/web2c,\
-$SELFAUTODIR/share/texmf/web2c,\
-$SELFAUTODIR/texmf-local/web2c,\
-$SELFAUTODIR/texmf-dist/web2c,\
-$SELFAUTODIR/texmf/web2c,\
-\
-$SELFAUTOPARENT/../texmf-local/web2c,\
-$SELFAUTOPARENT,\
-\
-$SELFAUTOPARENT/share/texmf-local/web2c,\
-$SELFAUTOPARENT/share/texmf-dist/web2c,\
-$SELFAUTOPARENT/share/texmf/web2c,\
-$SELFAUTOPARENT/texmf-local/web2c,\
-$SELFAUTOPARENT/texmf-dist/web2c,\
-$SELFAUTOPARENT/texmf/web2c\
-}
-%
-% For reference, here is the old brace-using definition:
-%TEXMFCNF = {$SELFAUTOLOC,$SELFAUTODIR,$SELFAUTOPARENT}{,{/share,}/texmf{-local,}/web2c}
-
-% kpathsea 3.5.3 and later sets these at runtime. To avoid empty
-% expansions from binaries linked against an earlier version of the
-% library, we set $progname and $engine to something non-empty:
-progname = unsetprogname
-engine = unsetengine
-
-
-% 
 Part 2: Options.
-
-% If this option is set to true, `tex a.b' will look first for a.b.tex
-% (within each path element), and then for a.b, i.e., we try standard
-% extensions first.  If this is false, we first look for a.b and then
-% a.b.tex, i.e., we try the name as-is first.
-%
-% Both names are always tried; the difference is the order in which they
-% are tried.  The setting applies to all searches, not just .tex.
-%
-% This setting only affects names being looked up which *already* have
-% an extension.  A name without an extension (e.g., `tex story') will
-% always have an extension added first.
-%
-% The default is true, because we already avoid adding the standard
-% extension(s) in the usual cases.  E.g., babel.sty will only look for
-% babel.sty, not babel.sty.tex, regardless of this setting.
-try_std_extension_first = t
-
-% Enable system commands via \write18{...}.  When enabled fully (set to
-% t), obviously insecure.  When enabled partially (set to p), only the
-% commands listed in shell_escape_commands are allowed.  Although this
-% is not fully secure either, it is much better, and so useful that we
-% enable it for everything but bare tex.
-shell_escape = p
-
-% No spaces in this command list.
-% 
-% The programs listed here are as safe as any we know: they either do
-% not write any output files, respect openout_any, or have hard-coded
-% restrictions similar to or higher than openout_any=p.  They also have
-% no features to invoke arbitrary other programs, and no known
-% exploitable bugs.  All to the best of our knowledge.  They also have
-% practical use for being called from TeX.
-% 
-shell_escape_commands = \
-bibtex,bibtex8,\
-extractbb,\
-gregorio,\
-kpsewhich,\
-makeindex,\
-repstopdf,\
-texosquery-jre8,\
-
-% we'd like to allow:
-% dvips - but external commands can be executed, need at least -R1.
-% epspdf, ps2pdf, pstopdf - need to respect openout_any,
-%   and gs -dSAFER must be used and check for shell injection with filenames.
-% pygmentize - but is the filter feature insecure?
-% ps4pdf - but it calls an unrestricted latex.
-% rpdfcrop - maybe ok, but let's get experience with repstopdf first.
-% texindy,xindy - but is the module feature insecure?
-% ulqda - but requires optional SHA1.pm, so why bother.
-% tex, latex, etc. - need to forbid --shell-escape, and inherit openout_any.
-
-% plain "tex" should remain unenhanced.
-shell_escape.tex = f
-shell_escape.initex = f
-
-% This is used by the Windows script wrapper for restricting searching
-% for the purportedly safe shell_escape_commands above to system
-% directories.
-TEXMF_RESTRICTED_SCRIPTS = \
-  {!!$TEXMFLOCAL,!!$TEXMFDIST}/scripts/{$progname,$engine,}//
-
-% Do we allow TeX \input or \openin (openin_any), or \openout
-% (openout_any) on filenames starting with `.' (e.g., .rhosts) or
-% outside the current tree (e.g., /etc/passwd)?
-% a (any)        : any file can be opened.
-% r (restricted) : disallow opening dot files
-% p (paranoid)   : as `r' and disallow going to parent directories, and
-%                  restrict absolute paths to be under $TEXMFOUTPUT.
-openin_any = a
-openout_any = p
-
-% Write .log/.dvi/.aux/etc. files here, if the current directory is unwritable.
-%TEXMFOUTPUT = /tmp
-
-% If a dynamic file creation fails, log the command to this file, in
-% either the current directory or TEXMFOUTPUT.  Set to the
-% empty string or  0  to avoid logging.
-MISSFONT_LOG = missfont.log
-
-% Set to a colon-separated list of words specifying warnings to suppress.
-% To suppress everything, use TEX_HUSH = all; this is currently equivalent to
-% TEX_HUSH = checksum:lostchar:readable:special
-% To suppress nothing, use TEX_HUSH = none or do not set the variable at all.
-TEX_HUSH = none
-
-% Allow TeX and MF to parse the first line of an input file for
-% the %&format construct.
-parse_first_line = t
-
-% But don't parse the first line if invoked as "tex", since we want that
-% to remain Knuth-compatible.  The src_specials and
-% file_line_error_style settings, as well as the options -enctex,
-% -mltex, -8bit, etc., also affect this, but they are all off by default.
-parse_first_line.tex = f
-parse_first_line.initex = f
-
-% Control file:line:error style messages.
-file_line_error_style = f
-
-% Enable the mktex... scripts by default?  These must be set to 0 or 1.
-% Particular programs can and do override these settings, for example
-% dvips's -M option.  Your first chance to specify whether the scripts
-% are invoked by default is at configure time.
-%
-% These values are ignored if the script names are changed; e.g., if you
-% set DVIPSMAKEPK to `foo', what counts is the value of the environment
-% variable/config value `FOO', not the `MKTEXPK' value.
-%
-%MKTEXTEX = 0
-%MKTEXPK = 0
-%MKTEXMF = 0
-%MKTEXTFM = 0
-%MKTEXFMT = 0
-%MKOCP = 0
-%MKOFM = 0
-
-% Used by makempx to run TeX.  We use "etex" because MetaPost is
-% expecting DVI, and not "tex" because we want first line parsing.
-TEX = etex
-
-% Use Japanese eptex for Japanese pmpost.
-TEX.pmpost = eptex
-
-% These variables specify the external program called for the
-% interactive `e' option.  %d is replaced by the line number and %s by
-% the current filename.  The default is specified at compile-time, and
-% we let that stay in place since different platforms like different values.
-%TEXEDIT = vi +%d '%s'                    % default for Unix
-%TEXEDIT = texworks --position=+%d "%s"   % default for Windows
-%MFEDIT = ${TEXEDIT}
-%MPEDIT = ${TEXEDIT}
-
-% The default `codepage and sort order' file for BibTeX8, when none is
-% given as command line option or environment variable.
-BIBTEX_CSFILE = 88591lat.csf
-
-% This variable is specific to Unix, to fall back to case-insensitive
-% search in non-system directories if there is no exact match. It is
-% enabled by default in texmf.cnf, but not enabled by default at
-% compile-time.
-%
-texmf_casefold_search = 1
-
-% This variable is specific to Windows.  It must be set to 0 or 1.  The
-% default is 0.  Setting it to 1 tells the Windows script wrappers to
-% use an already installed Perl interpreter if one is found on the
-% search path, in preference to the Perl shipped with TeX Live.  Thus,
-% it may be useful if you both (a) installed a full Perl distribution
-% for general use, and (b) need to run Perl programs from TL that use
-% additional modules we don't provide.  The TL Perl does provide all the
-% standard Perl modules.
-%
-%TEXLIVE_WINDOWS_TRY_EXTERNAL_PERL = 0
-
-
-% 
 Part 3: Array and other sizes for TeX, Metafont, etc.
-%
-% If you want to change some of these sizes only for a certain TeX
-% variant, the usual dot notation works, e.g.,
-% main_memory.hugetex = 20000000
-%
-% If a change here appears to be ignored, try redumping the format file.
-
-% Memory. Must be less than 8,000,000 total.
-%
-% main_memory is relevant only to initex, extra_mem_* only to non-ini.
-% Thus, have to redump the .fmt file after changing main_memory; to add
-% to existing fmt files, increase extra_mem_*.  (To get an idea of how
-% much, try \tracingstats=2 in your TeX source file;
-% web2c/tests/memtest.tex might also be interesting.)
-%
-% To increase space for boxes (as might be needed by, e.g., PiCTeX),
-% increase extra_mem_bot.
-%
-% For some xy-pic samples, you may need as much as 700000 words of memory.
-% For the vast majority of documents, 60000 or less will do.
-%
-main_memory = 5000000 % words of inimemory available; also applies to inimf&mp
-extra_mem_top = 0     % extra high memory for chars, tokens, etc.
-extra_mem_bot = 0     % extra low memory for boxes, glue, breakpoints, etc.
-
-% ConTeXt needs lots of memory.
-extra_mem_top.context = 2000000
-extra_mem_bot.context = 4000000
-
-% Words of font info for TeX (total size of all TFM files, approximately).
-% Must be >= 20000 and <= 147483647 (without tex.ch changes).
-font_mem_size = 8000000
-
-% Total number of fonts. Must be >= 50 and <= 9000 (without tex.ch changes).
-font_max = 9000
-
-% Extra space for the hash table of control sequences.
-hash_extra = 600000
-
-% Max number of characters in all strings, including all error messages,
-% help texts, font names, control sequences.  These values apply to TeX.
-pool_size = 6250000
-% Minimum pool space after TeX's own strings; must be at least
-% 25000 less than pool_size, but doesn't need to be nearly that large.
-string_vacancies = 90000
-% Maximum number of strings.
-max_strings = 500000
-% min pool space left after loading .fmt
-pool_free = 47500
-
-% Buffer size.  TeX uses the buffer to contain input lines, but macro
-% expansion works by writing material into the buffer and reparsing the
-% line.  As a consequence, certain constructs require the buffer to be
-% very large, even though most documents can be handled with a small value.
-buf_size = 200000
-
-% Hyphenation trie.  The maximum possible is 4194303 (ssup_trie_size in
-% the sources), but we don't need that much.  The value here suffices
-% for all known free hyphenation patterns to be loaded simultaneously
-% (as TeX Live does).
-%
-trie_size = 1000000
-
-hyph_size = 8191        % prime number of hyphenation exceptions, >610, <32767.
-                        % http://primes.utm.edu/curios/page.php/8191.html
-nest_size = 500         % simultaneous semantic levels (e.g., groups)
-max_in_open = 15        % simultaneous input files and error insertions, 
-                        % also applies to MetaPost
-param_size = 10000      % simultaneous macro parameters, also applies to MP
-save_size  = 100000     % for saving values outside current group
-stack_size = 5000       % simultaneous input sources
-
-% These are Omega-specific.
-ocp_buf_size = 500000   % character buffers for ocp filters.
-ocp_stack_size = 10000  % stacks for ocp computations.
-ocp_list_size = 1000    % control for multiple ocps.
-
-% These work best if they are the same as the I/O buffer size, but it
-% doesn't matter much.  Must be a multiple of 8.
-dvi_buf_size = 16384 % TeX
-gf_buf_size = 16384  % MF
-
-% It's probably inadvisable to change these. At any rate, we must have:
-% 45 < error_line      < 255;
-% 30 < half_error_line < error_line - 15;
-% 60 <= max_print_line;
-% These apply to TeX, Metafont, and MetaPost.
-error_line = 79
-half_error_line = 50
-max_print_line = 79
-
-% Metafont only.
-screen_width.mf = 1664
-screen_depth.mf = 1200
-
-% BibTeX only (max_strings also determines hash_size and hash_prime).
-ent_str_size =  250
-glob_str_size = 20000
-max_strings.bibtex  = 100000
-max_strings.bibtex8 = 100000
-max_strings.bibtexu = 100000
-max_strings.pbibtex = 100000
-max_strings.upbibtex = 100000
-
-% GFtype only.
-line_length.gftype = 500
-max_rows.gftype = 8191
-max_cols.gftype = 8191
-
-% Guess input encoding (SJIS vs. Unicode, etc.) in pTeX and friends?
-% Default is 1, to guess. Used on Windows only.
-guess_input_kanji_encoding = 1

Copied: texlive-core/repos/extra-any/texmf.cnf (from rev 402921, texlive-core/trunk/texmf.cnf)
===================================================================
--- texmf.cnf	                        (rev 0)
+++ texmf.cnf	2020-12-06 09:56:49 UTC (rev 402922)
@@ -0,0 +1,823 @@
+% texmf.cnf for TeXLive/Arch Linux -- runtime path configuration file for kpathsea.
+% Public domain.
+% 
+% If you modify this original file, YOUR CHANGES WILL BE LOST when it is
+% updated.  Instead, put your changes -- and only your changes, not an
+% entire copy! -- in ../../texmf.cnf.  That is, if this file is
+% installed in /some/path/to/texlive/2018/texmf-dist/web2c/texmf.cnf,
+% add your custom settings to /some/path/to/texlive/2018/texmf.cnf.
+% 
+% What follows is a super-summary of what this .cnf file can
+% contain. Please read the Kpathsea manual for more information.
+%
+% Each statement in this file boils down to:
+%   <variable>[.<program>] [=] <value>
+%
+% Neither the <variable> nor the <value> may be empty.
+% Any identifier (sticking to A-Za-z_ for names is safest) can be assigned.
+% The `=' (and surrounding spaces) is optional.
+% $foo (or ${foo}) in a value expands to the envvar or cnf value of foo.
+% Lines can be continued with a \; no whitespace removal is done.
+%
+% Earlier entries (in the same or another file) override later ones, and
+% an environment variable foo overrides any texmf.cnf definition of foo.
+%
+% All definitions are read before anything is expanded, so you can use
+% variables before they are defined.
+%
+% If a variable assignment is qualified with `.PROGRAM', it is ignored
+% unless the current executable (last filename component of argv[0]) is
+% named PROGRAM.  This foo.PROGRAM construct is not recognized on the
+% right-hand side. For environment variables, use FOO_PROGRAM.
+%
+% Which file formats use which paths for searches is described in the
+% various programs' and the Kpathsea documentation (http://tug.org/kpathsea).
+%
+% // means to search subdirectories (recursively).
+% A leading !! means to look only in the ls-R db, never on the disk.
+% In this file, either ; or : can be used to separate path components.
+% A leading/trailing/doubled path separator in the paths will be
+%   expanded into the compile-time default. Probably not what you want.
+%
+% Brace notation is supported, for example: /usr/local/{mytex,othertex}
+% expands to /usr/local/mytex:/usr/local/othertex.
+
+
+% 
 Part 1: Search paths and directories.
+
+% This is the parent directory of our several trees, i.e.,
+% /usr/local/texlive/YYYY in the original TeX Live distribution.
+%
+% The path definitions here assume the directories are organized
+% according to the TeX Directory Structure (http://tug.org/tds).
+%
+% Redistributors will probably want $SELFAUTODIR/share, i.e., /usr/share.
+% Kpathsea sets (in kpathsea/progname.c):
+% SELFAUTOLOC (directory of the binary=/usr/local/texlive/YYYY/bin/i386-linux),
+% SELFAUTODIR (its parent = /usr/local/texlive/YYYY/bin), 
+% SELFAUTOPARENT (its grandparent = /usr/local/texlive/YYYY), and
+% SELFAUTOGRANDPARENT (its great-grandparent = /usr/local/texlive).
+% Sorry for the off-by-one-generation names.
+TEXMFROOT = $SELFAUTODIR/share
+
+% The main tree of distributed packages and programs:
+TEXMFDIST = $TEXMFROOT/texmf-dist
+
+% We used to have a separate /texmf tree with some core programs and files.
+% Keep the variable name.
+TEXMFMAIN = $TEXMFDIST
+
+% Local additions to the distribution trees.
+TEXMFLOCAL = /usr/local/share/texmf;/usr/share/texmf
+
+% TEXMFSYSVAR, where *-sys store cached runtime data.
+TEXMFSYSVAR = /var/lib/texmf
+
+% TEXMFSYSCONFIG, where *-sys store configuration data.
+TEXMFSYSCONFIG = /etc/texmf
+
+% Per-user texmf tree(s) -- organized per the TDS, as usual.  To define
+% more than one per-user tree, set this to a list of directories in
+% braces, as described above.  (This used to be HOMETEXMF.)  ~ expands
+% to %USERPROFILE% on Windows, $HOME otherwise.
+TEXMFHOME = ~/texmf
+
+% TEXMFVAR, where texconfig/updmap/fmtutil store cached runtime data.
+TEXMFVAR = ~/.texlive/texmf-var
+
+% TEXMFCONFIG, where texconfig/updmap/fmtutil store configuration data.
+TEXMFCONFIG = ~/.texlive/texmf-config
+
+% This is the value manipulated by tlmgr's auxtrees subcommand in the
+% root texmf.cnf. Kpathsea warns about a literally empty string for a
+% value, hence the empty braces.
+TEXMFAUXTREES = {}
+
+% List all the texmf trees. For an explanation of what they are, see the
+% TeX Live manual.
+%
+% For texconfig to work properly, TEXMFCONFIG and TEXMFVAR should be named
+% explicitly and before other trees.
+% 
+% TEXMFLOCAL precedes TEXMFDIST because locally-installed versions
+% should take precedence over distribution files -- although it is
+% generally a source of confusion to have different versions of a
+% package installed, whatever the trees, so try to avoid it.
+% 
+% The odd-looking $TEXMFAUXTREES$TEXMF... construct is so that if no auxtree is
+% ever defined (the 99% common case), no extra elements will be added to
+% the search paths. tlmgr takes care to end any value with a trailing comma.
+TEXMF = {$TEXMFCONFIG,$TEXMFVAR,$TEXMFHOME,!!$TEXMFSYSCONFIG,!!$TEXMFSYSVAR,!!$TEXMFLOCAL,!!$TEXMFDIST}
+
+% Where to look for ls-R files.  There need not be an ls-R in the
+% directories in this path, but if there is one, Kpathsea will use it.
+% By default, this is only the !! elements of TEXMF, so that mktexlsr
+% does not create ls-R files in the non-!! elements -- because if an
+% ls-R is present, it will be used, and the disk will not be searched.
+% This is arguably a bug in kpathsea.
+TEXMFDBS = {!!$TEXMFLOCAL,!!$TEXMFSYSCONFIG,!!$TEXMFSYSVAR,!!$TEXMFDIST}
+
+% The system trees.  These are the trees that are shared by all users.
+% If a tree appears in this list, the mktex* scripts will use
+% VARTEXFONTS for generated files, if the original tree isn't writable;
+% otherwise the current working directory is used.
+SYSTEXMF = $TEXMFSYSVAR;$TEXMFLOCAL;$TEXMFDIST
+
+% First writable tree here is used by Lua(La)TeX for the font cache.
+% LuaLaTeX uses the value here, while ConTeXt uses the same variable but
+% from texmfcnf.lua; therefore the two values should be kept in sync.
+% (As should everything else in texmf.cnf <-> texmfcnf.lua.)
+TEXMFCACHE = $TEXMFSYSVAR;$TEXMFVAR
+
+% Where generated fonts may be written.  This tree is used when the sources
+% were found in a system tree and either that tree wasn't writable, or the
+% varfonts feature was enabled in MT_FEATURES in mktex.cnf.
+VARTEXFONTS = $TEXMFVAR/fonts
+
+% On some systems, there will be a system tree which contains all the font
+% files that may be created as well as the formats.  For example
+%   TEXMFVAR = /var/lib/texmf
+% is used in many distros.  In this case, set VARTEXFONTS like this
+%VARTEXFONTS = $TEXMFVAR/fonts
+% and do not mention it in TEXMFDBS (but _do_ mention TEXMFVAR).
+%
+% Remove $VARTEXFONTS from TEXMFDBS if the VARTEXFONTS directory is below
+% one of the TEXMF directories (avoids overlapping ls-R files).
+
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% Usually you will not need to edit any of the following variables.
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+% WEB2C is for Web2C specific files.  The current directory may not be
+% a good place to look for them.
+WEB2C = $TEXMF/web2c
+
+% TEXINPUTS is for TeX input files -- i.e., anything to be found by \input
+% or \openin, including .sty, .eps, etc.  We specify paths for all known
+% formats, past or present.  Not all of them are built these days.
+
+% Plain TeX.  Have the command tex check all directories as a last
+% resort, we may have plain-compatible stuff anywhere.
+TEXINPUTS.tex           = .;$TEXMF/tex/{plain,generic,}//
+
+% Fontinst needs to read afm files.
+TEXINPUTS.fontinst      = .;$TEXMF/{tex,fonts/afm}//
+
+% Other plain-based formats.
+TEXINPUTS.amstex        = .;$TEXMF/tex/{amstex,plain,generic,}//
+TEXINPUTS.csplain       = .;$TEXMF/tex/{csplain,plain,generic,}//
+TEXINPUTS.eplain        = .;$TEXMF/tex/{eplain,plain,generic,}//
+TEXINPUTS.ftex          = .;$TEXMF/tex/{formate,plain,generic,}//
+TEXINPUTS.mex           = .;$TEXMF/tex/{mex,plain,generic,}//
+TEXINPUTS.texinfo       = .;$TEXMF/tex/{texinfo,plain,generic,}//
+
+% LaTeX 2e specific macros are stored in latex/, macros that can only be
+% used with 2.09 in latex209/.  In addition, we look in the directory
+% latex209, useful for macros that were written for 2.09 and do not
+% mention 2e at all, but can be used with 2e.
+TEXINPUTS.cslatex       = .;$TEXMF/tex/{cslatex,csplain,latex,generic,}//
+TEXINPUTS.latex         = .;$TEXMF/tex/{latex,generic,}//
+TEXINPUTS.latex209      = .;$TEXMF/tex/{latex209,generic,latex,}//
+TEXINPUTS.olatex        = .;$TEXMF/tex/{latex,generic,}//
+
+% MLTeX.
+TEXINPUTS.frlatex       = .;$TEXMF/tex/{french,latex,generic,}//
+TEXINPUTS.frtex         = .;$TEXMF/tex/{french,plain,generic,}//
+TEXINPUTS.mllatex       = .;$TEXMF/tex/{latex,generic,}//
+TEXINPUTS.mltex         = .;$TEXMF/tex/{plain,generic,}//
+
+% e-TeX.
+TEXINPUTS.elatex        = .;$TEXMF/tex/{latex,generic,}//
+TEXINPUTS.etex          = .;$TEXMF/tex/{plain,generic,}//
+
+% pdfTeX.
+TEXINPUTS.pdfcslatex    = .;$TEXMF/tex/{cslatex,csplain,latex,generic,}//
+TEXINPUTS.pdfcsplain    = .;$TEXMF/tex/{csplain,plain,generic,}//
+TEXINPUTS.pdflatex      = .;$TEXMF/tex/{latex,generic,}//
+TEXINPUTS.pdfmex        = .;$TEXMF/tex/{mex,plain,generic,}//
+TEXINPUTS.utf8mex       = .;$TEXMF/tex/{mex,plain,generic,}//
+TEXINPUTS.pdftex        = .;$TEXMF/tex/{plain,generic,}//
+TEXINPUTS.pdftexinfo    = .;$TEXMF/tex/{texinfo,plain,generic,}//
+TEXINPUTS.pdfamstex     = .;$TEXMF/tex/{amstex,plain,generic,}//
+
+% pdfeTeX.
+TEXINPUTS.pdfelatex     = .;$TEXMF/tex/{latex,generic,}//
+TEXINPUTS.pdfetex       = .;$TEXMF/tex/{plain,generic,}//
+
+% LuaTeX.
+TEXINPUTS.luatex        = .;$TEXMF/tex/{luatex,plain,generic,}//
+TEXINPUTS.luajittex     = .;$TEXMF/tex/{luatex,plain,generic,}//
+TEXINPUTS.dviluatex     = .;$TEXMF/tex/{luatex,plain,generic,}//
+TEXINPUTS.lualatex      = .;$TEXMF/tex/{lualatex,latex,luatex,generic,}//
+TEXINPUTS.luajitlatex   = .;$TEXMF/tex/{lualatex,latex,luatex,generic,}//
+TEXINPUTS.dvilualatex   = .;$TEXMF/tex/{lualatex,latex,luatex,generic,}//
+
+% XeTeX.
+TEXINPUTS.xelatex       = .;$TEXMF/tex/{xelatex,latex,xetex,generic,}//
+TEXINPUTS.xeplain       = .;$TEXMF/tex/{xeplain,eplain,plain,xetex,generic,}//
+TEXINPUTS.xetex         = .;$TEXMF/tex/{xetex,plain,generic,}//
+
+% Omega / Aleph.
+TEXINPUTS.aleph         = .;$TEXMF/tex/{plain,generic,}//
+TEXINPUTS.elambda       = .;$TEXMF/tex/{lambda,latex,generic,}//
+TEXINPUTS.eomega        = .;$TEXMF/tex/{plain,generic,}//
+TEXINPUTS.lambda        = .;$TEXMF/tex/{lambda,latex,generic,}//
+TEXINPUTS.lamed         = .;$TEXMF/tex/{lambda,latex,generic,}//
+TEXINPUTS.omega         = .;$TEXMF/tex/{plain,generic,}//
+
+% p(La)TeX.
+TEXINPUTS.ptex          = .;$TEXMF/tex/{ptex,plain,generic,}//
+TEXINPUTS.platex        = .;$TEXMF/tex/{platex,latex,generic,}//
+
+% epTeX, and for pmpost.
+TEXINPUTS.eptex         = .;$TEXMF/tex/{ptex,plain,generic,}//
+TEX.pmpost = eptex
+
+% p(La)TeX-ng
+TEXINPUTS.ptex-ng   = .;$TEXMF/tex/{uptex,ptex,plain,generic,}//
+TEXINPUTS.platex-ng = .;$TEXMF/tex/{uplatex,platex,latex,generic,}//
+
+% (e)up(La)TeX, and for upmpost
+TEXINPUTS.uplatex = .;$TEXMF/tex/{uplatex,platex,latex,generic,}//
+TEXINPUTS.uptex   = .;$TEXMF/tex/{uptex,ptex,plain,generic,}//
+TEXINPUTS.euptex  = .;$TEXMF/tex/{uptex,ptex,plain,generic,}//
+TEX.upmpost = euptex
+
+% pBibTeX bibliographies and style files.
+BIBINPUTS.pbibtex       = .;$TEXMF/{pbibtex,bibtex}/bib//
+BSTINPUTS.pbibtex       = .;$TEXMF/{pbibtex,bibtex}/bst//
+
+% upBibTeX bibliographies and style files.
+BIBINPUTS.upbibtex      = .;$TEXMF/{upbibtex,pbibtex,bibtex}/bib//
+BSTINPUTS.upbibtex      = .;$TEXMF/{upbibtex,pbibtex,bibtex}/bst//
+
+% ConTeXt.
+TEXINPUTS.context       = .;$TEXMF/tex/{context,plain,generic,}//
+
+% jadetex.
+TEXINPUTS.jadetex       = .;$TEXMF/tex/{jadetex,latex,generic,}//
+TEXINPUTS.pdfjadetex    = .;$TEXMF/tex/{jadetex,latex,generic,}//
+
+% XMLTeX.
+TEXINPUTS.xmltex        = .;$TEXMF/tex/{xmltex,latex,generic,}//
+TEXINPUTS.pdfxmltex     = .;$TEXMF/tex/{xmltex,latex,generic,}//
+
+% Miscellany, no longer built.
+TEXINPUTS.lamstex       = .;$TEXMF/tex/{lamstex,plain,generic,}//
+TEXINPUTS.lollipop      = .;$TEXMF/tex/{lollipop,plain,generic,}//
+TEXINPUTS.frpdflatex    = .;$TEXMF/tex/{french,latex,generic,}//
+TEXINPUTS.frpdftex      = .;$TEXMF/tex/{french,plain,generic,}//
+
+% Earlier entries override later ones, so put this generic one last.
+TEXINPUTS               = .;$TEXMF/tex/{$progname,generic,}//
+
+% ttf2tfm.
+TTF2TFMINPUTS =                 .;$TEXMF/ttf2pk//
+
+% Metafont, MetaPost inputs.
+MFINPUTS = .;$TEXMF/metafont//;{$TEXMF/fonts,$VARTEXFONTS}/source//
+MPINPUTS = .;$TEXMF/metapost//
+
+% Dump files (fmt/base/mem) for vir{tex,mf,mp} to read.
+% We want to find the engine-specific file, e.g., cont-en.fmt can
+% exist under both pdftex/ and xetex/.  But just in case some formats
+% end up without an engine directory, look directly in web2c/ too.
+% We repeat the same definition three times because of the way fmtutil
+% is implemented; if we use ${TEXFORMATS}, the mpost/mf/etc. formats
+% will not be found.
+TEXFORMATS = .;$TEXMF/web2c{/$engine,}
+MFBASES = .;$TEXMF/web2c{/$engine,}
+MPMEMS = .;$TEXMF/web2c{/$engine,}
+%
+% As of 2008, pool files don't exist any more (the strings are compiled
+% into the binaries), but just in case something expects to find these:
+TEXPOOL = .;$TEXMF/web2c
+MFPOOL = ${TEXPOOL}
+MPPOOL = ${TEXPOOL}
+
+% support the original xdvi.  Must come before the generic settings.
+PKFONTS.XDvi   = .;$TEXMF/%s;$VARTEXFONTS/pk/{%m,modeless}//
+VFFONTS.XDvi   = .;$TEXMF/%s
+PSHEADERS.XDvi = .;$TEXMF/%q{dvips,fonts/type1}//
+TEXPICTS.XDvi  = .;$TEXMF/%q{dvips,tex}//
+
+% Device-independent font metric files.
+VFFONTS = .;$TEXMF/fonts/vf//
+TFMFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/tfm//
+
+% The $MAKETEX_MODE below means the drivers will not use a cx font when
+% the mode is ricoh.  If no mode is explicitly specified, kpse_prog_init
+% sets MAKETEX_MODE to /, so all subdirectories are searched.  See the manual.
+% The modeless part guarantees that bitmaps for PostScript fonts are found.
+PKFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/pk/{$MAKETEX_MODE,modeless}//
+
+% Similarly for the GF format, which only remains in existence because
+% Metafont outputs it (and MF isn't going to change).
+GFFONTS = .;$TEXMF/fonts/gf/$MAKETEX_MODE//
+
+% A backup for PKFONTS and GFFONTS. Not used for anything.
+GLYPHFONTS = .;$TEXMF/fonts
+
+% A place to puth everything that doesn't fit the other font categories.
+MISCFONTS = .;$TEXMF/fonts/misc//
+
+% font name map files.  This isn't just fonts/map// because ConTeXt
+% wants support for having files with the same name in the different
+% subdirs.  Maybe if the programs ever get unified to accepting the same
+% map file syntax the definition can be simplified again.
+TEXFONTMAPS = .;$TEXMF/fonts/map/{$progname,pdftex,dvips,}//
+
+% BibTeX bibliographies and style files.  bibtex8 also uses these.
+BIBINPUTS = .;$TEXMF/bibtex/bib//
+BSTINPUTS = .;$TEXMF/bibtex/{bst,csf}//
+
+% MlBibTeX.
+MLBIBINPUTS = .;$TEXMF/bibtex/bib/{mlbib,}//
+MLBSTINPUTS = .;$TEXMF/bibtex/{mlbst,bst}//
+
+% .ris and .bltxml bibliography formats.
+RISINPUTS = .;$TEXMF/biber/ris//
+BLTXMLINPUTS = .;$TEXMF/biber/bltxml//
+
+% MFT style files.
+MFTINPUTS = .;$TEXMF/mft//
+
+% PostScript headers and prologues (.pro); unfortunately, some programs
+% also use this for acessing font files (enc, type1, truetype)
+TEXPSHEADERS = .;$TEXMF/{dvips,fonts/{enc,type1,type42,type3}}//
+TEXPSHEADERS.gsftopk = .;$TEXMF/{dvips,fonts/{enc,type1,type42,type3,truetype}}//
+
+% OSFONTDIR is to provide a convenient hook for allowing TeX to find
+% fonts installed on the system (outside of TeX).  An empty default
+% value would add "//" to the search paths, so we give it a dummy value.
+% OSFONTDIR = /usr/share/fonts
+
+% PostScript Type 1 outline fonts.
+T1FONTS = .;$TEXMF/fonts/type1//;$OSFONTDIR//
+
+% PostScript AFM metric files.
+AFMFONTS = .;$TEXMF/fonts/afm//;$OSFONTDIR//
+
+% TrueType outline fonts.
+TTFONTS = .;$TEXMF/fonts/{truetype,opentype}//;$OSFONTDIR//
+
+% OpenType outline fonts.
+OPENTYPEFONTS = .;$TEXMF/fonts/{opentype,truetype}//;$OSFONTDIR//
+
+% Type 42 outline fonts.
+T42FONTS = .;$TEXMF/fonts/type42//
+
+% Ligature definition files.
+LIGFONTS =  .;$TEXMF/fonts/lig//
+
+% Dvips' config.* files (this name should not start with `TEX'!).
+TEXCONFIG = $TEXMF/dvips//
+
+% Makeindex style (.ist) files.
+INDEXSTYLE = .;$TEXMF/makeindex//
+
+% mendex dictionary files. Used internally by mendex and upmendex.
+% It is not necessary to introduce a new format in Kpathsea.
+INDEXDICTIONARY = .;$TEXMF/makeindex//
+
+% Font encoding files (.enc).
+ENCFONTS = .;$TEXMF/fonts/enc//
+
+% CMap files.
+CMAPFONTS = .;$TEXMF/fonts/cmap//
+
+% Subfont definition files.
+SFDFONTS = .;$TEXMF/fonts/sfd//
+
+% OpenType feature files (.fea).
+FONTFEATURES=.;$TEXMF/fonts/fea//
+
+% .cid and .cidmap
+FONTCIDMAPS=.;$TEXMF/fonts/cid//
+
+% pdftex config files:
+PDFTEXCONFIG = .;$TEXMF/pdftex/{$progname,}//
+
+% Used by DMP (ditroff-to-mpx), called by makempx -troff.
+TRFONTS = /usr{/local,}/share/groff/{current/font,site-font}/devps
+MPSUPPORT = .;$TEXMF/metapost/support
+
+% For xdvi to find mime.types and .mailcap, if they do not exist in
+% ~.  These are single directories, not paths.
+% (But the default mime.types, at least, may well suffice.)
+MIMELIBDIR = /etc
+MAILCAPLIBDIR = /etc
+
+% Default settings for the fontconfig library as used by the Windows
+% versions of xetex/xdvipdfmx.  Not used by xetex on Unixish systems.
+% ConTeXT MkIV (all platforms) also use these values.
+% 
+FONTCONFIG_FILE = fonts.conf
+FONTCONFIG_PATH = $TEXMFSYSVAR/fonts/conf
+FC_CACHEDIR = $TEXMFSYSVAR/fonts/cache
+
+% TeX documentation and source files, for use with texdoc and kpsewhich.
+TEXDOCS = $TEXMF/doc//
+TEXSOURCES = .;$TEXMF/source//
+
+% Web and CWeb input paths.
+WEBINPUTS = .;$TEXMF/web//
+CWEBINPUTS = .;$TEXMF/cweb//
+
+% Omega-related fonts and other files.
+OFMFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/{ofm,tfm}//
+OPLFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/opl//
+OVFFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/{ovf,vf}//
+OVPFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/ovp//
+OTPINPUTS = .;$TEXMF/omega/otp//
+OCPINPUTS = .;$TEXMF/omega/ocp//
+
+% Some additional input variables for several programs.  If you add
+% a program that uses the `other text files' or `other binary files'
+% search formats, you'll want to add their variables here as well.
+T4HTINPUTS   = .;$TEXMF/tex4ht//
+
+%% t4ht utility, sharing files with TeX4ht
+TEX4HTFONTSET=alias,iso8859,unicode
+TEX4HTINPUTS = .;$TEXMF/tex4ht/base//;$TEXMF/tex4ht/ht-fonts/{$TEX4HTFONTSET}//
+
+% TeXworks editor configuration and settings
+TW_LIBPATH = $TEXMFCONFIG/texworks
+TW_INIPATH = $TW_LIBPATH
+
+% For security, do not look in . for dvipdfmx.cfg, since the D option
+% would allow command execution.
+DVIPDFMXINPUTS = $TEXMF/dvipdfmx
+
+% Lua needs to look in TEXINPUTS for lua scripts distributed with packages.
+% 
+% But we can't simply use $TEXINPUTS, since then if TEXINPUTS is set in
+% the environment with a colon, say, TEXINPUTS=/some/dir:, the intended
+% default expansion of TEXINPUTS will not happen and .lua files under
+% the /tex/ will not be found.
+% 
+% So, duplicate the TEXINPUTS.*lualatex values as LUAINPUTS.*lualatex.
+% The default LUAINPUTS suffices for luatex and dviluatex.
+%
+LUAINPUTS.lualatex = .;$TEXMF/scripts/{$progname,$engine,}/{lua,}//;$TEXMF/tex/{lualatex,latex,luatex,generic,}//
+LUAINPUTS.dvilualatex = .;$TEXMF/scripts/{$progname,$engine,}/{lua,}//;$TEXMF/tex/{lualatex,latex,luatex,generic,}//
+LUAINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/{lua,}//;$TEXMF/tex/{luatex,plain,generic,}//
+
+% Lua needs to look for binary lua libraries distributed with packages.
+CLUAINPUTS = .;$SELFAUTOLOC/lib/{$progname,$engine,}/lua//
+
+% Architecture independent executables.
+TEXMFSCRIPTS = $TEXMF/scripts/{$progname,$engine,}//
+
+% Other languages.
+JAVAINPUTS   = .;$TEXMF/scripts/{$progname,$engine,}/java//
+PERLINPUTS   = .;$TEXMF/scripts/{$progname,$engine,}/perl//
+PYTHONINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/python//
+RUBYINPUTS   = .;$TEXMF/scripts/{$progname,$engine,}/ruby//
+
+
+%% The mktex* scripts rely on KPSE_DOT. Do not set it in the environment.
+% KPSE_DOT = .
+
+% This definition isn't used from this .cnf file itself (that would be
+% paradoxical), but the compile-time default in paths.h is built from it.
+% The SELFAUTO* variables are set automatically from the location of
+% argv[0], in kpse_set_program_name.
+% 
+% This main texmf.cnf file is installed, for a release YYYY, in a
+% directory such as /usr/local/texlive/YYYY/texmf-dist/web2c/texmf.cnf.
+% Since this file is subject to future updates, the TeX Live installer
+% or human administrator may also create a file
+% /usr/local/texlive/YYYY/texmf.cnf; any settings in this latter file
+% will take precedence over the distributed one.
+% 
+% For security reasons, it is best not to include . in this path.
+%
+% The idea behind this lengthy definition: for each of
+% SELFAUTO{LOC,DIR,PARENT}, look in the directory,
+% then the subdirectories share/texmf-local, share/texmf-dist, share/texmf,
+% then the subdirectories ./texmf-local, texmf-dist, ./texmf.
+% At any given installation, most of these directories will not exist,
+% but they all turn out to be useful somewhere.
+% 
+% Special addition -- we want to include one more directory: the
+% great-grandparent's texmf-local, because that is how TL is installed
+% by default.  That is, given a binary
+% /usr/local/texlive/YYYY/bin/PLATFORM/kpsewhich, it should find
+% /usr/local/texlive/texmf-local/web2c/texmf.cnf.  I.e., not under YYYY.
+% 
+% As a result, we cannot use actual brace expansion in the definition,
+% since we don't want to scatter ../'s throughout the value.  Hence we
+% explicitly list every directory.  Arguably more understandable anyway.
+%
+TEXMFCNF = {\
+$SELFAUTOLOC,\
+$SELFAUTOLOC/share/texmf-local/web2c,\
+$SELFAUTOLOC/share/texmf-dist/web2c,\
+$SELFAUTOLOC/share/texmf/web2c,\
+$SELFAUTOLOC/texmf-local/web2c,\
+$SELFAUTOLOC/texmf-dist/web2c,\
+$SELFAUTOLOC/texmf/web2c,\
+\
+$SELFAUTODIR,\
+$SELFAUTODIR/share/texmf-local/web2c,\
+$SELFAUTODIR/share/texmf-dist/web2c,\
+$SELFAUTODIR/share/texmf/web2c,\
+$SELFAUTODIR/texmf-local/web2c,\
+$SELFAUTODIR/texmf-dist/web2c,\
+$SELFAUTODIR/texmf/web2c,\
+\
+$SELFAUTOPARENT/../texmf-local/web2c,\
+$SELFAUTOPARENT,\
+\
+$SELFAUTOPARENT/share/texmf-local/web2c,\
+$SELFAUTOPARENT/share/texmf-dist/web2c,\
+$SELFAUTOPARENT/share/texmf/web2c,\
+$SELFAUTOPARENT/texmf-local/web2c,\
+$SELFAUTOPARENT/texmf-dist/web2c,\
+$SELFAUTOPARENT/texmf/web2c\
+}
+%
+% For reference, here is the old brace-using definition:
+%TEXMFCNF = {$SELFAUTOLOC,$SELFAUTODIR,$SELFAUTOPARENT}{,{/share,}/texmf{-local,}/web2c}
+
+% kpathsea 3.5.3 and later sets these at runtime. To avoid empty
+% expansions from binaries linked against an earlier version of the
+% library, we set $progname and $engine to something non-empty:
+progname = unsetprogname
+engine = unsetengine
+
+
+% 
 Part 2: Options.
+
+% If this option is set to true, `tex a.b' will look first for a.b.tex
+% (within each path element), and then for a.b, i.e., we try standard
+% extensions first.  If this is false, we first look for a.b and then
+% a.b.tex, i.e., we try the name as-is first.
+%
+% Both names are always tried; the difference is the order in which they
+% are tried.  The setting applies to all searches, not just .tex.
+%
+% This setting only affects names being looked up which *already* have
+% an extension.  A name without an extension (e.g., `tex story') will
+% always have an extension added first.
+%
+% The default is true, because we already avoid adding the standard
+% extension(s) in the usual cases.  E.g., babel.sty will only look for
+% babel.sty, not babel.sty.tex, regardless of this setting.
+try_std_extension_first = t
+
+% Enable system commands via \write18{...}.  When enabled fully (set to
+% t), obviously insecure.  When enabled partially (set to p), only the
+% commands listed in shell_escape_commands are allowed.  Although this
+% is not fully secure either, it is much better, and so useful that we
+% enable it for everything but bare tex.
+shell_escape = p
+
+% No spaces in this command list.
+% 
+% The programs listed here are as safe as any we know: they either do
+% not write any output files, respect openout_any, or have hard-coded
+% restrictions similar to or higher than openout_any=p.  They also have
+% no features to invoke arbitrary other programs, and no known
+% exploitable bugs.  All to the best of our knowledge.  They also have
+% practical use for being called from TeX.
+% 
+shell_escape_commands = \
+bibtex,bibtex8,\
+extractbb,\
+gregorio,\
+kpsewhich,\
+makeindex,\
+repstopdf,\
+texosquery-jre8,\
+
+% we'd like to allow:
+% dvips - but external commands can be executed, need at least -R1.
+% epspdf, ps2pdf, pstopdf - need to respect openout_any,
+%   and gs -dSAFER must be used and check for shell injection with filenames.
+% pygmentize - but is the filter feature insecure?
+% ps4pdf - but it calls an unrestricted latex.
+% rpdfcrop - maybe ok, but let's get experience with repstopdf first.
+% texindy,xindy - but is the module feature insecure?
+% ulqda - but requires optional SHA1.pm, so why bother.
+% tex, latex, etc. - need to forbid --shell-escape, and inherit openout_any.
+
+% plain "tex" should remain unenhanced.
+shell_escape.tex = f
+shell_escape.initex = f
+
+% This is used by the Windows script wrapper for restricting searching
+% for the purportedly safe shell_escape_commands above to system
+% directories.
+TEXMF_RESTRICTED_SCRIPTS = \
+  {!!$TEXMFLOCAL,!!$TEXMFDIST}/scripts/{$progname,$engine,}//
+
+% Do we allow TeX \input or \openin (openin_any), or \openout
+% (openout_any) on filenames starting with `.' (e.g., .rhosts) or
+% outside the current tree (e.g., /etc/passwd)?
+% a (any)        : any file can be opened.
+% r (restricted) : disallow opening dot files
+% p (paranoid)   : as `r' and disallow going to parent directories, and
+%                  restrict absolute paths to be under $TEXMFOUTPUT.
+openin_any = a
+openout_any = p
+
+% Write .log/.dvi/.aux/etc. files here, if the current directory is unwritable.
+%TEXMFOUTPUT = /tmp
+
+% If a dynamic file creation fails, log the command to this file, in
+% either the current directory or TEXMFOUTPUT.  Set to the
+% empty string or  0  to avoid logging.
+MISSFONT_LOG = missfont.log
+
+% Set to a colon-separated list of words specifying warnings to suppress.
+% To suppress everything, use TEX_HUSH = all; this is currently equivalent to
+% TEX_HUSH = checksum:lostchar:readable:special
+% To suppress nothing, use TEX_HUSH = none or do not set the variable at all.
+TEX_HUSH = none
+
+% Allow TeX and MF to parse the first line of an input file for
+% the %&format construct.
+parse_first_line = t
+
+% But don't parse the first line if invoked as "tex", since we want that
+% to remain Knuth-compatible.  The src_specials and
+% file_line_error_style settings, as well as the options -enctex,
+% -mltex, -8bit, etc., also affect this, but they are all off by default.
+parse_first_line.tex = f
+parse_first_line.initex = f
+
+% Control file:line:error style messages.
+file_line_error_style = f
+
+% Enable the mktex... scripts by default?  These must be set to 0 or 1.
+% Particular programs can and do override these settings, for example
+% dvips's -M option.  Your first chance to specify whether the scripts
+% are invoked by default is at configure time.
+%
+% These values are ignored if the script names are changed; e.g., if you
+% set DVIPSMAKEPK to `foo', what counts is the value of the environment
+% variable/config value `FOO', not the `MKTEXPK' value.
+%
+%MKTEXTEX = 0
+%MKTEXPK = 0
+%MKTEXMF = 0
+%MKTEXTFM = 0
+%MKTEXFMT = 0
+%MKOCP = 0
+%MKOFM = 0
+
+% Used by makempx to run TeX.  We use "etex" because MetaPost is
+% expecting DVI, and not "tex" because we want first line parsing.
+TEX = etex
+
+% Use Japanese eptex for Japanese pmpost.
+TEX.pmpost = eptex
+
+% These variables specify the external program called for the
+% interactive `e' option.  %d is replaced by the line number and %s by
+% the current filename.  The default is specified at compile-time, and
+% we let that stay in place since different platforms like different values.
+%TEXEDIT = vi +%d '%s'                    % default for Unix
+%TEXEDIT = texworks --position=+%d "%s"   % default for Windows
+%MFEDIT = ${TEXEDIT}
+%MPEDIT = ${TEXEDIT}
+
+% The default `codepage and sort order' file for BibTeX8, when none is
+% given as command line option or environment variable.
+BIBTEX_CSFILE = 88591lat.csf
+
+% This variable is specific to Unix, to fall back to case-insensitive
+% search in non-system directories if there is no exact match. It is
+% enabled by default in texmf.cnf, but not enabled by default at
+% compile-time.
+%
+texmf_casefold_search = 1
+
+% This variable is specific to Windows.  It must be set to 0 or 1.  The
+% default is 0.  Setting it to 1 tells the Windows script wrappers to
+% use an already installed Perl interpreter if one is found on the
+% search path, in preference to the Perl shipped with TeX Live.  Thus,
+% it may be useful if you both (a) installed a full Perl distribution
+% for general use, and (b) need to run Perl programs from TL that use
+% additional modules we don't provide.  The TL Perl does provide all the
+% standard Perl modules.
+%
+%TEXLIVE_WINDOWS_TRY_EXTERNAL_PERL = 0
+
+
+% 
 Part 3: Array and other sizes for TeX, Metafont, etc.
+%
+% If you want to change some of these sizes only for a certain TeX
+% variant, the usual dot notation works, e.g.,
+% main_memory.hugetex = 20000000
+%
+% If a change here appears to be ignored, try redumping the format file.
+
+% Memory. Must be less than 8,000,000 total.
+%
+% main_memory is relevant only to initex, extra_mem_* only to non-ini.
+% Thus, have to redump the .fmt file after changing main_memory; to add
+% to existing fmt files, increase extra_mem_*.  (To get an idea of how
+% much, try \tracingstats=2 in your TeX source file;
+% web2c/tests/memtest.tex might also be interesting.)
+%
+% To increase space for boxes (as might be needed by, e.g., PiCTeX),
+% increase extra_mem_bot.
+%
+% For some xy-pic samples, you may need as much as 700000 words of memory.
+% For the vast majority of documents, 60000 or less will do.
+%
+main_memory = 5000000 % words of inimemory available; also applies to inimf&mp
+extra_mem_top = 0     % extra high memory for chars, tokens, etc.
+extra_mem_bot = 0     % extra low memory for boxes, glue, breakpoints, etc.
+
+% ConTeXt needs lots of memory.
+extra_mem_top.context = 2000000
+extra_mem_bot.context = 4000000
+
+% Words of font info for TeX (total size of all TFM files, approximately).
+% Must be >= 20000 and <= 147483647 (without tex.ch changes).
+font_mem_size = 8000000
+
+% Total number of fonts. Must be >= 50 and <= 9000 (without tex.ch changes).
+font_max = 9000
+
+% Extra space for the hash table of control sequences.
+hash_extra = 600000
+
+% Max number of characters in all strings, including all error messages,
+% help texts, font names, control sequences.  These values apply to TeX.
+pool_size = 6250000
+% Minimum pool space after TeX's own strings; must be at least
+% 25000 less than pool_size, but doesn't need to be nearly that large.
+string_vacancies = 90000
+% Maximum number of strings.
+max_strings = 500000
+% min pool space left after loading .fmt
+pool_free = 47500
+
+% Buffer size.  TeX uses the buffer to contain input lines, but macro
+% expansion works by writing material into the buffer and reparsing the
+% line.  As a consequence, certain constructs require the buffer to be
+% very large, even though most documents can be handled with a small value.
+buf_size = 200000
+
+% Hyphenation trie.  The maximum possible is 4194303 (ssup_trie_size in
+% the sources), but we don't need that much.  The value here suffices
+% for all known free hyphenation patterns to be loaded simultaneously
+% (as TeX Live does).
+%
+trie_size = 1000000
+
+hyph_size = 8191        % prime number of hyphenation exceptions, >610, <32767.
+                        % http://primes.utm.edu/curios/page.php/8191.html
+nest_size = 500         % simultaneous semantic levels (e.g., groups)
+max_in_open = 15        % simultaneous input files and error insertions, 
+                        % also applies to MetaPost
+param_size = 10000      % simultaneous macro parameters, also applies to MP
+save_size  = 100000     % for saving values outside current group
+stack_size = 5000       % simultaneous input sources
+
+% These are Omega-specific.
+ocp_buf_size = 500000   % character buffers for ocp filters.
+ocp_stack_size = 10000  % stacks for ocp computations.
+ocp_list_size = 1000    % control for multiple ocps.
+
+% These work best if they are the same as the I/O buffer size, but it
+% doesn't matter much.  Must be a multiple of 8.
+dvi_buf_size = 16384 % TeX
+gf_buf_size = 16384  % MF
+
+% It's probably inadvisable to change these. At any rate, we must have:
+% 45 < error_line      < 255;
+% 30 < half_error_line < error_line - 15;
+% 60 <= max_print_line;
+% These apply to TeX, Metafont, and MetaPost.
+error_line = 79
+half_error_line = 50
+max_print_line = 79
+
+% Metafont only.
+screen_width.mf = 1664
+screen_depth.mf = 1200
+
+% BibTeX only (max_strings also determines hash_size and hash_prime).
+ent_str_size =  250
+glob_str_size = 20000
+max_strings.bibtex  = 100000
+max_strings.bibtex8 = 100000
+max_strings.bibtexu = 100000
+max_strings.pbibtex = 100000
+max_strings.upbibtex = 100000
+
+% GFtype only.
+line_length.gftype = 500
+max_rows.gftype = 8191
+max_cols.gftype = 8191
+
+% Guess input encoding (SJIS vs. Unicode, etc.) in pTeX and friends?
+% Default is 1, to guess. Used on Windows only.
+guess_input_kanji_encoding = 1

Deleted: texmfcnf.lua
===================================================================
--- texmfcnf.lua	2020-12-06 09:56:42 UTC (rev 402921)
+++ texmfcnf.lua	2020-12-06 09:56:49 UTC (rev 402922)
@@ -1,190 +0,0 @@
--- public domain
-
--- ConTeXt needs a properly expanded TEXMFLOCAL, so here is a
--- bit of lua code to make that happen
-
-local texmflocal = resolvers.prefixes.selfautoparent();
-texmflocal = string.gsub(texmflocal, "20%d%d$", "texmf-local");
-
-return {
-
-    type    = "configuration",
-    version = "1.1.0",
-    date    = "2012-05-24",
-    time    = "12:12:12",
-    comment = "ConTeXt MkIV configuration file",
-    author  = "Hans Hagen, PRAGMA-ADE, Hasselt NL",
-
-    content = {
-
-        -- Originally there was support for engines and progname but I don't expect
-        -- other engines to use this file, so first engines were removed. After that
-        -- if made sense also to get rid of progname. At some point specific formats
-        -- will be supported but then as a subtable with fallbacks, which sounds more
-        -- natural. Also, at some point the paths will become tables. For the moment
-        -- I don't care too much about it as extending is easy.
-
-        variables = {
-
-            -- The following variable is predefined (but can be overloaded) and in
-            -- most cases you can leve this one untouched. The built-in definition
-            -- permits relocation of the tree.
-            --
-            -- TEXMFCNF     = "{selfautodir:,selfautoparent:}{,{/share,}/texmf{-local,}/web2c}"
-            --
-            -- more readable than "selfautoparent:{/texmf{-local,}{,/web2c},}}" is:
-            --
-            -- TEXMFCNF     = {
-            --     "selfautoparent:/texmf-local",
-            --     "selfautoparent:/texmf-local/web2c",
-            --     "selfautoparent:/texmf-dist",
-            --     "selfautoparent:/texmf/web2c",
-            --     "selfautoparent:",
-            -- }
-
-            -- only used for FONTCONFIG_PATH & TEXMFCACHE in TeX Live
-
-            TEXMFSYSVAR     = "/var/lib/texmf",
-            TEXMFVAR        = "home:.texlive/texmf-var",
-
-            -- We have only one cache path but there can be more. The first writable one
-            -- will be chosen but there can be more readable paths.
-
-            TEXMFCACHE      = "$TEXMFSYSVAR;$TEXMFVAR",
-            TEXMFCONFIG     = "home:.texlive/texmf-config",
-
-            -- I don't like this texmf under home and texmf-home would make more
-            -- sense. One never knows what installers put under texmf anywhere and
-            -- sorting out problems will be a pain. But on the other hand ... home
-            -- mess is normally under the users own responsibility.
-            --
-            -- By using prefixes we don't get expanded paths in the cache __path__
-            -- entry. This makes the tex root relocatable.
-
-            TEXMFOS         = "selfautodir:share",
-            TEXMFDIST       = "selfautodir:share/texmf-dist",
-
-            TEXMFLOCAL      = texmflocal,
-            TEXMFSYSCONFIG  = "/etc/texmf",
-            TEXMFFONTS      = "selfautoparent:texmf-fonts",
-            TEXMFPROJECT    = "selfautoparent:texmf-project",
-
-            TEXMFHOME       = "home:texmf",
-         -- TEXMFHOME       = os.name == "macosx" and "home:Library/texmf" or "home:texmf",
-
-            -- We need texmfos for a few rare files but as I have a few more bin trees
-            -- a hack is needed. Maybe other users also have texmf-platform-new trees.
-
-            TEXMF           = "{$TEXMFCONFIG,$TEXMFHOME,!!$TEXMFSYSCONFIG,!!$TEXMFSYSVAR,!!$TEXMFPROJECT,!!$TEXMFFONTS,!!$TEXMFLOCAL,!!$TEXMFDIST}",
-
-            TEXFONTMAPS     = ".;$TEXMF/fonts/data//;$TEXMF/fonts/map/{pdftex,dvips}//",
-            ENCFONTS        = ".;$TEXMF/fonts/data//;$TEXMF/fonts/enc/{dvips,pdftex}//",
-            VFFONTS         = ".;$TEXMF/fonts/{data,vf}//",
-            TFMFONTS        = ".;$TEXMF/fonts/{data,tfm}//",
-            T1FONTS         = ".;$TEXMF/fonts/{data,type1}//;$OSFONTDIR",
-            AFMFONTS        = ".;$TEXMF/fonts/{data,afm}//;$OSFONTDIR",
-            TTFONTS         = ".;$TEXMF/fonts/{data,truetype}//;$OSFONTDIR",
-            OPENTYPEFONTS   = ".;$TEXMF/fonts/{data,opentype}//;$OSFONTDIR",
-            CMAPFONTS       = ".;$TEXMF/fonts/cmap//",
-            FONTFEATURES    = ".;$TEXMF/fonts/{data,fea}//;$OPENTYPEFONTS;$TTFONTS;$T1FONTS;$AFMFONTS",
-            FONTCIDMAPS     = ".;$TEXMF/fonts/{data,cid}//",
-            OFMFONTS        = ".;$TEXMF/fonts/{data,ofm,tfm}//",
-            OVFFONTS        = ".;$TEXMF/fonts/{data,ovf,vf}//",
-
-            TEXINPUTS       = ".;$TEXMF/tex/{context,plain/base,generic}//",
-            MPINPUTS        = ".;$TEXMF/metapost/{context,base,}//",
-
-            -- In the next variable the inputs path will go away.
-
-            TEXMFSCRIPTS    = ".;$TEXMF/scripts/context/{lua,ruby,python,perl}//;$TEXINPUTS",
-            PERLINPUTS      = ".;$TEXMF/scripts/context/perl",
-            PYTHONINPUTS    = ".;$TEXMF/scripts/context/python",
-            RUBYINPUTS      = ".;$TEXMF/scripts/context/ruby",
-            LUAINPUTS       = ".;$TEXINPUTS;$TEXMF/scripts/context/lua//",
-            CLUAINPUTS      = ".;$SELFAUTOLOC/lib/{context,luatex,}/lua//",
-
-            -- Not really used by MkIV so they might go away.
-
-            BIBINPUTS       = ".;$TEXMF/bibtex/bib//",
-            BSTINPUTS       = ".;$TEXMF/bibtex/bst//",
-
-            -- Experimental
-
-            ICCPROFILES     = ".;$TEXMF/tex/context/colors/{icc,profiles}//;$OSCOLORDIR",
-
-            -- A few special ones that will change some day.
-
-            FONTCONFIG_FILE = "fonts.conf",
-            FONTCONFIG_PATH = "$TEXMFSYSVAR/fonts/conf",
-
-        },
-
-        -- We have a few reserved subtables. These control runtime behaviour. The
-        -- keys have names like 'foo.bar' which means that you have to use keys
-        -- like ['foo.bar'] so for convenience we also support 'foo_bar'.
-
-        directives = {
-
-            -- There are a few variables that determine the engines
-            -- limits. Most will fade away when we close in on version 1.
-
-            ["luatex.expanddepth"]       =  "10000", -- 10000
-            ["luatex.hashextra"]         = "100000", --     0
-            ["luatex.nestsize"]          =   "1000", --    50
-            ["luatex.maxinopen"]         =    "500", --    15
-            ["luatex.maxprintline"]      = " 10000", --    79
-            ["luatex.maxstrings"]        = "500000", -- 15000 -- obsolete
-            ["luatex.paramsize"]         =  "25000", --    60
-            ["luatex.savesize"]          =  "50000", --  4000
-            ["luatex.stacksize"]         =  "10000", --   300
-
-            -- A few process related variables come next.
-
-         -- ["system.checkglobals"]      = "10",
-         -- ["system.nostatistics"]      = "yes",
-            ["system.errorcontext"]      = "10",
-            ["system.compile.cleanup"]   = "no",    -- remove tma files
-            ["system.compile.strip"]     = "yes",   -- strip tmc files
-
-            -- The io modes are similar to the traditional ones. Possible values
-            -- are all, paranoid and restricted.
-
-            ["system.outputmode"]        = "restricted",
-            ["system.inputmode"]         = "any",
-
-            -- The following variable is under consideration. We do have protection
-            -- mechanims but it's not enabled by default.
-
-            ["system.commandmode"]       = "any", -- any none list
-            ["system.commandlist"]       = "mtxrun, convert, inkscape, gs, imagemagick, curl, bibtex, pstoedit",
-
-            -- The mplib library support mechanisms have their own
-            -- configuration. Normally these variables can be left as
-            -- they are.
-
-            ["mplib.texerrors"]          = "yes",
-
-            -- Normally you can leave the font related directives untouched
-            -- as they only make sense when testing.
-
-         -- ["fonts.autoreload"]         = "no",
-         -- ["fonts.otf.loader.method"]  = "table", -- table mixed sparse
-         -- ["fonts.otf.loader.cleanup"] = "0",     -- 0 1 2 3
-
-            -- In an edit cycle it can be handy to launch an editor. The
-            -- preferred one can be set here.
-
-         -- ["pdfview.method"]           = "okular", -- default (often acrobat) xpdf okular
-
-        },
-
-        experiments = {
-            ["fonts.autorscale"] = "yes",
-        },
-
-        trackers = {
-        },
-
-    },
-
-}

Copied: texlive-core/repos/extra-any/texmfcnf.lua (from rev 402921, texlive-core/trunk/texmfcnf.lua)
===================================================================
--- texmfcnf.lua	                        (rev 0)
+++ texmfcnf.lua	2020-12-06 09:56:49 UTC (rev 402922)
@@ -0,0 +1,190 @@
+-- public domain
+
+-- ConTeXt needs a properly expanded TEXMFLOCAL, so here is a
+-- bit of lua code to make that happen
+
+local texmflocal = resolvers.prefixes.selfautoparent();
+texmflocal = string.gsub(texmflocal, "20%d%d$", "texmf-local");
+
+return {
+
+    type    = "configuration",
+    version = "1.1.0",
+    date    = "2012-05-24",
+    time    = "12:12:12",
+    comment = "ConTeXt MkIV configuration file",
+    author  = "Hans Hagen, PRAGMA-ADE, Hasselt NL",
+
+    content = {
+
+        -- Originally there was support for engines and progname but I don't expect
+        -- other engines to use this file, so first engines were removed. After that
+        -- if made sense also to get rid of progname. At some point specific formats
+        -- will be supported but then as a subtable with fallbacks, which sounds more
+        -- natural. Also, at some point the paths will become tables. For the moment
+        -- I don't care too much about it as extending is easy.
+
+        variables = {
+
+            -- The following variable is predefined (but can be overloaded) and in
+            -- most cases you can leve this one untouched. The built-in definition
+            -- permits relocation of the tree.
+            --
+            -- TEXMFCNF     = "{selfautodir:,selfautoparent:}{,{/share,}/texmf{-local,}/web2c}"
+            --
+            -- more readable than "selfautoparent:{/texmf{-local,}{,/web2c},}}" is:
+            --
+            -- TEXMFCNF     = {
+            --     "selfautoparent:/texmf-local",
+            --     "selfautoparent:/texmf-local/web2c",
+            --     "selfautoparent:/texmf-dist",
+            --     "selfautoparent:/texmf/web2c",
+            --     "selfautoparent:",
+            -- }
+
+            -- only used for FONTCONFIG_PATH & TEXMFCACHE in TeX Live
+
+            TEXMFSYSVAR     = "/var/lib/texmf",
+            TEXMFVAR        = "home:.texlive/texmf-var",
+
+            -- We have only one cache path but there can be more. The first writable one
+            -- will be chosen but there can be more readable paths.
+
+            TEXMFCACHE      = "$TEXMFSYSVAR;$TEXMFVAR",
+            TEXMFCONFIG     = "home:.texlive/texmf-config",
+
+            -- I don't like this texmf under home and texmf-home would make more
+            -- sense. One never knows what installers put under texmf anywhere and
+            -- sorting out problems will be a pain. But on the other hand ... home
+            -- mess is normally under the users own responsibility.
+            --
+            -- By using prefixes we don't get expanded paths in the cache __path__
+            -- entry. This makes the tex root relocatable.
+
+            TEXMFOS         = "selfautodir:share",
+            TEXMFDIST       = "selfautodir:share/texmf-dist",
+
+            TEXMFLOCAL      = texmflocal,
+            TEXMFSYSCONFIG  = "/etc/texmf",
+            TEXMFFONTS      = "selfautoparent:texmf-fonts",
+            TEXMFPROJECT    = "selfautoparent:texmf-project",
+
+            TEXMFHOME       = "home:texmf",
+         -- TEXMFHOME       = os.name == "macosx" and "home:Library/texmf" or "home:texmf",
+
+            -- We need texmfos for a few rare files but as I have a few more bin trees
+            -- a hack is needed. Maybe other users also have texmf-platform-new trees.
+
+            TEXMF           = "{$TEXMFCONFIG,$TEXMFHOME,!!$TEXMFSYSCONFIG,!!$TEXMFSYSVAR,!!$TEXMFPROJECT,!!$TEXMFFONTS,!!$TEXMFLOCAL,!!$TEXMFDIST}",
+
+            TEXFONTMAPS     = ".;$TEXMF/fonts/data//;$TEXMF/fonts/map/{pdftex,dvips}//",
+            ENCFONTS        = ".;$TEXMF/fonts/data//;$TEXMF/fonts/enc/{dvips,pdftex}//",
+            VFFONTS         = ".;$TEXMF/fonts/{data,vf}//",
+            TFMFONTS        = ".;$TEXMF/fonts/{data,tfm}//",
+            T1FONTS         = ".;$TEXMF/fonts/{data,type1}//;$OSFONTDIR",
+            AFMFONTS        = ".;$TEXMF/fonts/{data,afm}//;$OSFONTDIR",
+            TTFONTS         = ".;$TEXMF/fonts/{data,truetype}//;$OSFONTDIR",
+            OPENTYPEFONTS   = ".;$TEXMF/fonts/{data,opentype}//;$OSFONTDIR",
+            CMAPFONTS       = ".;$TEXMF/fonts/cmap//",
+            FONTFEATURES    = ".;$TEXMF/fonts/{data,fea}//;$OPENTYPEFONTS;$TTFONTS;$T1FONTS;$AFMFONTS",
+            FONTCIDMAPS     = ".;$TEXMF/fonts/{data,cid}//",
+            OFMFONTS        = ".;$TEXMF/fonts/{data,ofm,tfm}//",
+            OVFFONTS        = ".;$TEXMF/fonts/{data,ovf,vf}//",
+
+            TEXINPUTS       = ".;$TEXMF/tex/{context,plain/base,generic}//",
+            MPINPUTS        = ".;$TEXMF/metapost/{context,base,}//",
+
+            -- In the next variable the inputs path will go away.
+
+            TEXMFSCRIPTS    = ".;$TEXMF/scripts/context/{lua,ruby,python,perl}//;$TEXINPUTS",
+            PERLINPUTS      = ".;$TEXMF/scripts/context/perl",
+            PYTHONINPUTS    = ".;$TEXMF/scripts/context/python",
+            RUBYINPUTS      = ".;$TEXMF/scripts/context/ruby",
+            LUAINPUTS       = ".;$TEXINPUTS;$TEXMF/scripts/context/lua//",
+            CLUAINPUTS      = ".;$SELFAUTOLOC/lib/{context,luatex,}/lua//",
+
+            -- Not really used by MkIV so they might go away.
+
+            BIBINPUTS       = ".;$TEXMF/bibtex/bib//",
+            BSTINPUTS       = ".;$TEXMF/bibtex/bst//",
+
+            -- Experimental
+
+            ICCPROFILES     = ".;$TEXMF/tex/context/colors/{icc,profiles}//;$OSCOLORDIR",
+
+            -- A few special ones that will change some day.
+
+            FONTCONFIG_FILE = "fonts.conf",
+            FONTCONFIG_PATH = "$TEXMFSYSVAR/fonts/conf",
+
+        },
+
+        -- We have a few reserved subtables. These control runtime behaviour. The
+        -- keys have names like 'foo.bar' which means that you have to use keys
+        -- like ['foo.bar'] so for convenience we also support 'foo_bar'.
+
+        directives = {
+
+            -- There are a few variables that determine the engines
+            -- limits. Most will fade away when we close in on version 1.
+
+            ["luatex.expanddepth"]       =  "10000", -- 10000
+            ["luatex.hashextra"]         = "100000", --     0
+            ["luatex.nestsize"]          =   "1000", --    50
+            ["luatex.maxinopen"]         =    "500", --    15
+            ["luatex.maxprintline"]      = " 10000", --    79
+            ["luatex.maxstrings"]        = "500000", -- 15000 -- obsolete
+            ["luatex.paramsize"]         =  "25000", --    60
+            ["luatex.savesize"]          =  "50000", --  4000
+            ["luatex.stacksize"]         =  "10000", --   300
+
+            -- A few process related variables come next.
+
+         -- ["system.checkglobals"]      = "10",
+         -- ["system.nostatistics"]      = "yes",
+            ["system.errorcontext"]      = "10",
+            ["system.compile.cleanup"]   = "no",    -- remove tma files
+            ["system.compile.strip"]     = "yes",   -- strip tmc files
+
+            -- The io modes are similar to the traditional ones. Possible values
+            -- are all, paranoid and restricted.
+
+            ["system.outputmode"]        = "restricted",
+            ["system.inputmode"]         = "any",
+
+            -- The following variable is under consideration. We do have protection
+            -- mechanims but it's not enabled by default.
+
+            ["system.commandmode"]       = "any", -- any none list
+            ["system.commandlist"]       = "mtxrun, convert, inkscape, gs, imagemagick, curl, bibtex, pstoedit",
+
+            -- The mplib library support mechanisms have their own
+            -- configuration. Normally these variables can be left as
+            -- they are.
+
+            ["mplib.texerrors"]          = "yes",
+
+            -- Normally you can leave the font related directives untouched
+            -- as they only make sense when testing.
+
+         -- ["fonts.autoreload"]         = "no",
+         -- ["fonts.otf.loader.method"]  = "table", -- table mixed sparse
+         -- ["fonts.otf.loader.cleanup"] = "0",     -- 0 1 2 3
+
+            -- In an edit cycle it can be handy to launch an editor. The
+            -- preferred one can be set here.
+
+         -- ["pdfview.method"]           = "okular", -- default (often acrobat) xpdf okular
+
+        },
+
+        experiments = {
+            ["fonts.autorscale"] = "yes",
+        },
+
+        trackers = {
+        },
+
+    },
+
+}



More information about the arch-commits mailing list