[arch-commits] Commit in shadow/repos (13 files)
Dave Reisner
dreisner at archlinux.org
Wed Jul 15 20:19:32 UTC 2020
Date: Wednesday, July 15, 2020 @ 20:19:32
Author: dreisner
Revision: 391949
archrelease: copy trunk to testing-x86_64
Added:
shadow/repos/testing-x86_64/
shadow/repos/testing-x86_64/LICENSE
(from rev 391948, shadow/trunk/LICENSE)
shadow/repos/testing-x86_64/PKGBUILD
(from rev 391948, shadow/trunk/PKGBUILD)
shadow/repos/testing-x86_64/chgpasswd
(from rev 391948, shadow/trunk/chgpasswd)
shadow/repos/testing-x86_64/chpasswd
(from rev 391948, shadow/trunk/chpasswd)
shadow/repos/testing-x86_64/defaults.pam
(from rev 391948, shadow/trunk/defaults.pam)
shadow/repos/testing-x86_64/login.defs
(from rev 391948, shadow/trunk/login.defs)
shadow/repos/testing-x86_64/newusers
(from rev 391948, shadow/trunk/newusers)
shadow/repos/testing-x86_64/passwd
(from rev 391948, shadow/trunk/passwd)
shadow/repos/testing-x86_64/shadow.install
(from rev 391948, shadow/trunk/shadow.install)
shadow/repos/testing-x86_64/shadow.service
(from rev 391948, shadow/trunk/shadow.service)
shadow/repos/testing-x86_64/shadow.timer
(from rev 391948, shadow/trunk/shadow.timer)
shadow/repos/testing-x86_64/useradd.defaults
(from rev 391948, shadow/trunk/useradd.defaults)
------------------+
LICENSE | 31 +++++++
PKGBUILD | 128 ++++++++++++++++++++++++++++++++
chgpasswd | 4 +
chpasswd | 6 +
defaults.pam | 6 +
login.defs | 208 +++++++++++++++++++++++++++++++++++++++++++++++++++++
newusers | 6 +
passwd | 4 +
shadow.install | 22 +++++
shadow.service | 11 ++
shadow.timer | 7 +
useradd.defaults | 9 ++
12 files changed, 442 insertions(+)
Copied: shadow/repos/testing-x86_64/LICENSE (from rev 391948, shadow/trunk/LICENSE)
===================================================================
--- testing-x86_64/LICENSE (rev 0)
+++ testing-x86_64/LICENSE 2020-07-15 20:19:32 UTC (rev 391949)
@@ -0,0 +1,31 @@
+/*
+ * Copyright (c) 1990 - 1994, Julianne Frances Haugh
+ * Copyright (c) 1996 - 2000, Marek Michałkiewicz
+ * Copyright (c) 2001 - 2006, Tomasz Kłoczko
+ * Copyright (c) 2007 - 2009, Nicolas François
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The name of the copyright holders or contributors may not be used to
+ * endorse or promote products derived from this software without
+ * specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+ * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
Copied: shadow/repos/testing-x86_64/PKGBUILD (from rev 391948, shadow/trunk/PKGBUILD)
===================================================================
--- testing-x86_64/PKGBUILD (rev 0)
+++ testing-x86_64/PKGBUILD 2020-07-15 20:19:32 UTC (rev 391949)
@@ -0,0 +1,128 @@
+# Maintainer: Dave Reisner <dreisner at archlinux.org>
+# Maintainer: Aaron Griffin <aaron at archlinux.org>
+
+pkgname=shadow
+pkgver=4.8.1
+pkgrel=3
+pkgdesc="Password and account management tool suite with support for shadow files and PAM"
+arch=('x86_64')
+url='https://github.com/shadow-maint/shadow'
+license=('BSD')
+# libcap-ng needed by install scriptlet for 'filecap'
+depends=('pam' 'acl' 'audit' 'libaudit.so' 'libcap-ng')
+backup=(etc/login.defs
+ etc/pam.d/{chage,passwd,shadow,useradd,usermod,userdel}
+ etc/pam.d/{chpasswd,newusers,groupadd,groupdel,groupmod}
+ etc/pam.d/{chgpasswd,groupmems}
+ etc/default/useradd)
+options=(strip debug)
+validpgpkeys=('D5C2F9BFCA128BBA22A77218872F702C4D6E25A8' # Christian Perrier
+ 'F1D08DB778185BF784002DFFE9FEEA06A85E3F9D') # Serge Hallyn
+source=("https://github.com/shadow-maint/shadow/releases/download/$pkgver/shadow-$pkgver.tar.xz"{,.asc}
+ LICENSE
+ chgpasswd
+ chpasswd
+ defaults.pam
+ login.defs
+ newusers
+ passwd
+ shadow.{timer,service}
+ useradd.defaults)
+install=shadow.install
+sha1sums=('63457a0ba58dc4e81b2663b839dc6c89d3343f12'
+ 'SKIP'
+ '33a6cf1e44a1410e5c9726c89e5de68b78f5f922'
+ '4ad0e059406a305c8640ed30d93c2a1f62c2f4ad'
+ '12427b1ca92a9b85ca8202239f0d9f50198b818f'
+ '0e56fed7fc93572c6bf0d8f3b099166558bb46f1'
+ '81a02eadb5f605fef5c75b6d8a03713a7041864b'
+ '12427b1ca92a9b85ca8202239f0d9f50198b818f'
+ '611be25d91c3f8f307c7fe2485d5f781e5dee75f'
+ 'a154a94b47a3d0c6c287253b98c0d10b861226d0'
+ 'b5540736f5acbc23b568973eb5645604762db3dd'
+ 'c173208c5cf34528602f9931468a67b7f68abad3')
+
+build() {
+ cd "$pkgname-$pkgver"
+
+ autoreconf -fsiv
+ ./configure \
+ --prefix=/usr \
+ --bindir=/usr/bin \
+ --sbindir=/usr/bin \
+ --libdir=/usr/lib \
+ --mandir=/usr/share/man \
+ --sysconfdir=/etc \
+ --disable-account-tools-setuid \
+ --with-libpam \
+ --with-group-name-max-length=32 \
+ --with-audit \
+ --without-selinux
+
+ make
+}
+
+package() {
+ cd "$pkgname-$pkgver"
+
+ make DESTDIR="$pkgdir" install
+
+ # license
+ install -Dm644 "$srcdir/LICENSE" "$pkgdir/usr/share/licenses/shadow/LICENSE"
+
+ # useradd defaults
+ install -Dm600 "$srcdir/useradd.defaults" "$pkgdir/etc/default/useradd"
+
+ # systemd units
+ install -D -m644 "$srcdir/shadow.timer" "$pkgdir/usr/lib/systemd/system/shadow.timer"
+ install -D -m644 "$srcdir/shadow.service" "$pkgdir/usr/lib/systemd/system/shadow.service"
+ install -d -m755 "$pkgdir/usr/lib/systemd/system/timers.target.wants"
+ ln -s ../shadow.timer "$pkgdir/usr/lib/systemd/system/timers.target.wants/shadow.timer"
+
+ # login.defs
+ install -Dm644 "$srcdir/login.defs" "$pkgdir/etc/login.defs"
+
+ # PAM config - custom
+ rm "$pkgdir/etc/pam.d"/*
+ install -t "$pkgdir/etc/pam.d" -m644 "$srcdir"/{passwd,chgpasswd,chpasswd,newusers}
+
+ # PAM config - from tarball
+ install -Dm644 etc/pam.d/groupmems "$pkgdir/etc/pam.d/groupmems"
+
+ # we use the 'useradd' PAM file for other similar utilities
+ for file in chage groupadd groupdel groupmod shadow \
+ useradd usermod userdel; do
+ install -Dm644 "$srcdir/defaults.pam" "$pkgdir/etc/pam.d/$file"
+ done
+
+ # Remove evil/broken tools
+ rm "$pkgdir"/usr/sbin/logoutd
+
+ # Remove utilities provided by util-linux
+ rm \
+ "$pkgdir"/usr/bin/{login,su,chsh,chfn,sg,nologin} \
+ "$pkgdir"/usr/sbin/{vipw,vigr}
+
+ # but we keep newgrp, as sg is really an alias to it
+ mv "$pkgdir"/usr/bin/{newgrp,sg}
+
+ # ...and their many man pages
+ find "$pkgdir"/usr/share/man \
+ '(' -name 'chsh.1' -o \
+ -name 'chfn.1' -o \
+ -name 'su.1' -o \
+ -name 'logoutd.8' -o \
+ -name 'login.1' -o \
+ -name 'nologin.8' -o \
+ -name 'vipw.8' -o \
+ -name 'vigr.8' -o \
+ -name 'newgrp.1' ')' \
+ -delete
+ rmdir \
+ "$pkgdir"/usr/share/man/{fi,id,zh_TW}/man1 \
+ "$pkgdir"/usr/share/man/{fi,ko/man8}
+
+ # move everything else to /usr/bin, because this isn't handled by ./configure
+ mv "$pkgdir"/usr/sbin/* "$pkgdir"/usr/bin
+ rmdir "$pkgdir/usr/sbin"
+}
Copied: shadow/repos/testing-x86_64/chgpasswd (from rev 391948, shadow/trunk/chgpasswd)
===================================================================
--- testing-x86_64/chgpasswd (rev 0)
+++ testing-x86_64/chgpasswd 2020-07-15 20:19:32 UTC (rev 391949)
@@ -0,0 +1,4 @@
+#%PAM-1.0
+auth sufficient pam_rootok.so
+account required pam_permit.so
+password include system-auth
Copied: shadow/repos/testing-x86_64/chpasswd (from rev 391948, shadow/trunk/chpasswd)
===================================================================
--- testing-x86_64/chpasswd (rev 0)
+++ testing-x86_64/chpasswd 2020-07-15 20:19:32 UTC (rev 391949)
@@ -0,0 +1,6 @@
+#%PAM-1.0
+auth sufficient pam_rootok.so
+auth required pam_unix.so
+account required pam_unix.so
+session required pam_unix.so
+password required pam_unix.so sha512 shadow
Copied: shadow/repos/testing-x86_64/defaults.pam (from rev 391948, shadow/trunk/defaults.pam)
===================================================================
--- testing-x86_64/defaults.pam (rev 0)
+++ testing-x86_64/defaults.pam 2020-07-15 20:19:32 UTC (rev 391949)
@@ -0,0 +1,6 @@
+#%PAM-1.0
+auth sufficient pam_rootok.so
+auth required pam_unix.so
+account required pam_unix.so
+session required pam_unix.so
+password required pam_permit.so
Copied: shadow/repos/testing-x86_64/login.defs (from rev 391948, shadow/trunk/login.defs)
===================================================================
--- testing-x86_64/login.defs (rev 0)
+++ testing-x86_64/login.defs 2020-07-15 20:19:32 UTC (rev 391949)
@@ -0,0 +1,208 @@
+#
+# /etc/login.defs - Configuration control definitions for the login package.
+#
+# Three items must be defined: MAIL_DIR, ENV_SUPATH, and ENV_PATH.
+# If unspecified, some arbitrary (and possibly incorrect) value will
+# be assumed. All other items are optional - if not specified then
+# the described action or option will be inhibited.
+#
+# Comment lines (lines beginning with "#") and blank lines are ignored.
+#
+# Modified for Linux. --marekm
+
+#
+# Delay in seconds before being allowed another attempt after a login failure
+#
+FAIL_DELAY 3
+
+#
+# Enable display of unknown usernames when login failures are recorded.
+#
+LOG_UNKFAIL_ENAB no
+
+#
+# Enable logging of successful logins
+#
+LOG_OK_LOGINS no
+
+#
+# Enable "syslog" logging of su activity - in addition to sulog file logging.
+# SYSLOG_SG_ENAB does the same for newgrp and sg.
+#
+SYSLOG_SU_ENAB yes
+SYSLOG_SG_ENAB yes
+
+#
+# If defined, either full pathname of a file containing device names or
+# a ":" delimited list of device names. Root logins will be allowed only
+# upon these devices.
+#
+CONSOLE /etc/securetty
+#CONSOLE console:tty01:tty02:tty03:tty04
+
+#
+# If defined, all su activity is logged to this file.
+#
+#SULOG_FILE /var/log/sulog
+
+#
+# If defined, file which maps tty line to TERM environment parameter.
+# Each line of the file is in a format something like "vt100 tty01".
+#
+#TTYTYPE_FILE /etc/ttytype
+
+#
+# If defined, the command name to display when running "su -". For
+# example, if this is defined as "su" then a "ps" will display the
+# command is "-su". If not defined, then "ps" would display the
+# name of the shell actually being run, e.g. something like "-sh".
+#
+SU_NAME su
+
+#
+# *REQUIRED*
+# Directory where mailboxes reside, _or_ name of file, relative to the
+# home directory. If you _do_ define both, MAIL_DIR takes precedence.
+# QMAIL_DIR is for Qmail
+#
+#QMAIL_DIR Maildir
+MAIL_DIR /var/spool/mail
+
+#
+# If defined, file which inhibits all the usual chatter during the login
+# sequence. If a full pathname, then hushed mode will be enabled if the
+# user's name or shell are found in the file. If not a full pathname, then
+# hushed mode will be enabled if the file exists in the user's home directory.
+#
+HUSHLOGIN_FILE .hushlogin
+#HUSHLOGIN_FILE /etc/hushlogins
+
+#
+# *REQUIRED* The default PATH settings, for superuser and normal users.
+#
+# (they are minimal, add the rest in the shell startup files)
+ENV_SUPATH PATH=/usr/local/sbin:/usr/local/bin:/usr/bin
+ENV_PATH PATH=/usr/local/sbin:/usr/local/bin:/usr/bin
+
+#
+# Terminal permissions
+#
+# TTYGROUP Login tty will be assigned this group ownership.
+# TTYPERM Login tty will be set to this permission.
+#
+# If you have a "write" program which is "setgid" to a special group
+# which owns the terminals, define TTYGROUP to the group number and
+# TTYPERM to 0620. Otherwise leave TTYGROUP commented out and assign
+# TTYPERM to either 622 or 600.
+#
+TTYGROUP tty
+TTYPERM 0600
+
+#
+# Login configuration initializations:
+#
+# ERASECHAR Terminal ERASE character ('\010' = backspace).
+# KILLCHAR Terminal KILL character ('\025' = CTRL/U).
+# UMASK Default "umask" value.
+#
+# The ERASECHAR and KILLCHAR are used only on System V machines.
+# The ULIMIT is used only if the system supports it.
+# (now it works with setrlimit too; ulimit is in 512-byte units)
+#
+# Prefix these values with "0" to get octal, "0x" to get hexadecimal.
+#
+ERASECHAR 0177
+KILLCHAR 025
+UMASK 077
+
+#
+# Password aging controls:
+#
+# PASS_MAX_DAYS Maximum number of days a password may be used.
+# PASS_MIN_DAYS Minimum number of days allowed between password changes.
+# PASS_WARN_AGE Number of days warning given before a password expires.
+#
+PASS_MAX_DAYS 99999
+PASS_MIN_DAYS 0
+PASS_WARN_AGE 7
+
+#
+# Min/max values for automatic uid selection in useradd
+#
+UID_MIN 1000
+UID_MAX 60000
+# System accounts
+SYS_UID_MIN 500
+SYS_UID_MAX 999
+
+#
+# Min/max values for automatic gid selection in groupadd
+#
+GID_MIN 1000
+GID_MAX 60000
+# System accounts
+SYS_GID_MIN 500
+SYS_GID_MAX 999
+
+#
+# Max number of login retries if password is bad
+#
+LOGIN_RETRIES 5
+
+#
+# Max time in seconds for login
+#
+LOGIN_TIMEOUT 60
+
+#
+# Which fields may be changed by regular users using chfn - use
+# any combination of letters "frwh" (full name, room number, work
+# phone, home phone). If not defined, no changes are allowed.
+# For backward compatibility, "yes" = "rwh" and "no" = "frwh".
+#
+CHFN_RESTRICT rwh
+
+#
+# List of groups to add to the user's supplementary group set
+# when logging in on the console (as determined by the CONSOLE
+# setting). Default is none.
+#
+# Use with caution - it is possible for users to gain permanent
+# access to these groups, even when not logged in on the console.
+# How to do it is left as an exercise for the reader...
+#
+#CONSOLE_GROUPS floppy:audio:cdrom
+
+#
+# Should login be allowed if we can't cd to the home directory?
+# Default in no.
+#
+DEFAULT_HOME yes
+
+#
+# If defined, this command is run when removing a user.
+# It should remove any at/cron/print jobs etc. owned by
+# the user to be removed (passed as the first argument).
+#
+#USERDEL_CMD /usr/sbin/userdel_local
+
+#
+# Enable setting of the umask group bits to be the same as owner bits
+# (examples: 022 -> 002, 077 -> 007) for non-root users, if the uid is
+# the same as gid, and username is the same as the primary group name.
+#
+# This also enables userdel to remove user groups if no members exist.
+#
+USERGROUPS_ENAB yes
+
+#
+# Controls display of the motd file. This is better handled by pam_motd.so
+# so the declaration here is empty is suppress display by readers of this
+# file.
+#
+MOTD_FILE
+
+#
+# Hash shadow passwords with SHA512.
+#
+ENCRYPT_METHOD SHA512
Copied: shadow/repos/testing-x86_64/newusers (from rev 391948, shadow/trunk/newusers)
===================================================================
--- testing-x86_64/newusers (rev 0)
+++ testing-x86_64/newusers 2020-07-15 20:19:32 UTC (rev 391949)
@@ -0,0 +1,6 @@
+#%PAM-1.0
+auth sufficient pam_rootok.so
+auth required pam_unix.so
+account required pam_unix.so
+session required pam_unix.so
+password required pam_unix.so sha512 shadow
Copied: shadow/repos/testing-x86_64/passwd (from rev 391948, shadow/trunk/passwd)
===================================================================
--- testing-x86_64/passwd (rev 0)
+++ testing-x86_64/passwd 2020-07-15 20:19:32 UTC (rev 391949)
@@ -0,0 +1,4 @@
+#%PAM-1.0
+#password required pam_cracklib.so difok=2 minlen=8 dcredit=2 ocredit=2 retry=3
+#password required pam_unix.so sha512 shadow use_authtok
+password required pam_unix.so sha512 shadow nullok
Copied: shadow/repos/testing-x86_64/shadow.install (from rev 391948, shadow/trunk/shadow.install)
===================================================================
--- testing-x86_64/shadow.install (rev 0)
+++ testing-x86_64/shadow.install 2020-07-15 20:19:32 UTC (rev 391949)
@@ -0,0 +1,22 @@
+setcaps() {
+ _setcap() {
+ if filecap "$1" "$2"; then
+ chmod -s "$1"
+ fi
+ }
+
+ # shadow ships these as setuid, but if we can apply file caps, use those instead.
+ # 'filecap' insists on absolute paths
+ _setcap /usr/bin/newuidmap setuid
+ _setcap /usr/bin/newgidmap setgid
+}
+
+post_install() {
+ setcaps
+}
+
+post_upgrade() {
+ setcaps
+}
+
+# vim:set ts=2 sw=2 et:
Copied: shadow/repos/testing-x86_64/shadow.service (from rev 391948, shadow/trunk/shadow.service)
===================================================================
--- testing-x86_64/shadow.service (rev 0)
+++ testing-x86_64/shadow.service 2020-07-15 20:19:32 UTC (rev 391949)
@@ -0,0 +1,11 @@
+[Unit]
+Description=Verify integrity of password and group files
+After=systemd-sysusers.service
+
+[Service]
+Type=simple
+# Always run both checks, but fail the service if either fails
+ExecStart=/bin/sh -c '/usr/bin/pwck -r || r=1; /usr/bin/grpck -r && exit $r'
+Nice=19
+IOSchedulingClass=best-effort
+IOSchedulingPriority=7
Copied: shadow/repos/testing-x86_64/shadow.timer (from rev 391948, shadow/trunk/shadow.timer)
===================================================================
--- testing-x86_64/shadow.timer (rev 0)
+++ testing-x86_64/shadow.timer 2020-07-15 20:19:32 UTC (rev 391949)
@@ -0,0 +1,7 @@
+[Unit]
+Description=Daily verification of password and group files
+
+[Timer]
+OnCalendar=daily
+AccuracySec=12h
+Persistent=true
Copied: shadow/repos/testing-x86_64/useradd.defaults (from rev 391948, shadow/trunk/useradd.defaults)
===================================================================
--- testing-x86_64/useradd.defaults (rev 0)
+++ testing-x86_64/useradd.defaults 2020-07-15 20:19:32 UTC (rev 391949)
@@ -0,0 +1,9 @@
+# useradd defaults file for ArchLinux
+# original changes by TomK
+GROUP=users
+HOME=/home
+INACTIVE=-1
+EXPIRE=
+SHELL=/bin/bash
+SKEL=/etc/skel
+CREATE_MAIL_SPOOL=no
More information about the arch-commits
mailing list