[arch-commits] Commit in iwd/repos/community-x86_64 (6 files)
Christian Rebischke
shibumi at archlinux.org
Sun Jun 21 21:32:14 UTC 2020
Date: Sunday, June 21, 2020 @ 21:32:14
Author: shibumi
Revision: 650288
archrelease: copy trunk to community-x86_64
Added:
iwd/repos/community-x86_64/ChangeLog
(from rev 650287, iwd/trunk/ChangeLog)
iwd/repos/community-x86_64/PKGBUILD
(from rev 650287, iwd/trunk/PKGBUILD)
iwd/repos/community-x86_64/iwd.install
(from rev 650287, iwd/trunk/iwd.install)
Deleted:
iwd/repos/community-x86_64/ChangeLog
iwd/repos/community-x86_64/PKGBUILD
iwd/repos/community-x86_64/iwd.install
-------------+
ChangeLog | 412 +++++++++++++++++++++++++++++-----------------------------
PKGBUILD | 104 +++++++-------
iwd.install | 12 -
3 files changed, 264 insertions(+), 264 deletions(-)
Deleted: ChangeLog
===================================================================
--- ChangeLog 2020-06-21 21:26:37 UTC (rev 650287)
+++ ChangeLog 2020-06-21 21:32:14 UTC (rev 650288)
@@ -1,206 +0,0 @@
-ver 1.8:
- Fix issue with handling FT AKMs when not supported.
- Fix issue with handling FILS and RSNE in authenticate.
- Fix issue with handling auto-connection and quick scan.
- Fix issue with sending multiple scan requests.
- Add support for P2P feature and API.
-
-ver 1.7:
- Fix issue with APs that send IGTK falsely in big endian.
- Fix issue with setting linkmode & operstate for open networks.
-
-ver 1.6:
- Fix issue with handling missing AP stop events.
- Fix issue with handling out-of-order disconnect events.
- Fix issue with handling missing auth/assoc support.
- Fix issue with handling omitted EAP-TLS-CACert.
- Fix issue with handling OWE PTK derivation.
- Add support for internal frame exchange API.
- Add support for MAC randomization and override.
- Add support for per-network MAC addresses.
-
-ver 1.5:
- Fix issue with handling missing NEW_WIPHY events.
- Fix issue with interface creation and NEW_WIPHY events.
- Fix issue with handling LastConnectedTime property change.
- Fix issue with PEAPv0 interoperability with Windows.
-
-ver 1.4:
- Fix issue with handling Crypto-Binding and invalid MACs.
- Fix issue with handling change station error results.
- Fix issue with handling DNS resolving installations.
-
-ver 1.3:
- Fix issue with handling EAP-GTC and password requests.
- Fix issue with handling Crypto-Binding TLV for PEAPv0.
- Fix issue with handling key installation and PEAP Phase 2.
- Fix issue with handling externally triggered scan requests.
- Fix issue with handling RCPI calculation for RRM requests.
-
-ver 1.2:
- Fix issue with handling scan requests while connecting.
- Fix issue with handling scan duration for RRM requests.
- Fix issue with handling parent TSF value for RRM requests.
-
-ver 1.1:
- Fix issue with simple configuration support checks.
- Fix issue with handling TLS tunnel and PEAPv0.
- Add support for radio resource management.
-
-ver 1.0:
- Add support for stable D-Bus interfaces.
- Add support for network configuration documentation.
-
-ver 0.23:
- Fix issue with strict certificate chain checks.
- Fix issue with parsing RSNE_ADVANCE information.
- Fix issue with parsing RSN information for WPA1.
- Fix issue with logic error in scan frequency validation.
- Fix issue with integer overflow and authentication frames.
- Add support for installing various manual pages.
-
-ver 0.22:
- Fix issue with hotplug and device capability detection.
- Add support for IPv6 network configuration handling.
- Add support for embedding certificates in profiles.
-
-ver 0.21:
- Fix issue with cleartext ACK and tunneled EAP-Success.
- Fix issue with setting bits in extended capabilities.
- Fix issue with WPA-1 information element parsing.
- Add support for handling QoS Map IE and frames.
- Add support for STATE_DIRECTORY environment.
- Add support for CONFIGURATION_DIRECTORY environment.
-
-ver 0.20:
- Add support for adding Extended Capabilities bits.
- Add support for ServerDomainMask configuration option.
-
-ver 0.19:
- Add support for Hotspot 2.0 functionality.
- Add support for FILS Fast Transition feature.
- Add support for network configuration handling.
- Add support for resolution services framework.
-
-ver 0.18:
- Fix issue with handling stale scan results.
- Fix issue with handling OWE group renegotiation.
- Fix issue with handshake failures on FT-PSK.
- Add support for FILS (Fast Initial Link Setup).
-
-ver 0.17:
- Fix issue with handling association failure path.
- Fix issue with handling checks for valid ECC point/scalar.
- Fix issue with handling potential infinite loop and SAE.
- Fix issue with handling randomization for passive scans.
- Add support for randomization of SN for probe requests.
- Add support for handling the FILS cipher suites.
- Add support for ERP key caching feature.
-
-ver 0.16:
- Add missing pkcs8.conf for module loading.
-
-ver 0.15:
- Fix issue with handling RSSI thresholds.
- Fix issue with handling abort for a connection.
- Fix issue with stopping Access Point operation.
- Add support for individual BSS blacklisting.
- Add support for utilizing MAC randomization.
- Add support for utilizing different key lengths.
- Add support for 16, 24 and 32 byte MIC lengths.
- Add support for handling driver rekying feature.
-
-ver 0.14:
- Add support for tunneled MSCHAPv2 authentication.
-
-ver 0.13:
- Fix issue with WSC interface runtime handling.
- Add support for Opportunistic Wireless Encryption.
- Add support for common EAP-TLS framework.
-
-ver 0.12:
- Fix issue with handling 802.1x automatic connection.
- Fix issue with handling missing support for backtrace.
-
-ver 0.11:
- Fix issue with handling EAP-TTLS and redundant L flags.
- Fix issue with handling EAP-TLS upper limit on request size.
- Fix issue with handling handshake complete after setting keys.
- Fix issue with handling access points with too many rates.
- Fix issue with requiring PSK if passphrase is present.
- Add support for retrieving list of hidden access points.
- Add support for tunneled MS-CHAP.
-
-ver 0.10:
- Fix issue with Ethernet authentication packet handling.
- Fix issue with ad-hoc network scan results in station mode.
- Fix issue with cancellation of ongoing rekey offload.
- Add support for setting per-mac GTK credentials.
- Add support for using external Embedded Linux library.
-
-ver 0.9:
- Fix issue with handling EAP-WSC passwords.
- Add support for TTLS-CHAP and TTLS-PAP.
- Add support for handling FT over SAE.
-
-ver 0.8:
- Fix issue with handling EAP_CACHE_NEVER secret types.
- Fix issue with redundant usage of the L flag and PEAP.
- Fix issue with EAP type 33 as termination mechanism for PEAPv1.
- Add initial version of Ethernet authentication daemon.
- Add support for Station mode interface.
-
-ver 0.7:
- Fix issue with hard coded peer address and SAE networks.
- Fix issue with raw passphrase requirement and SAE networks.
- Fix issue with differentiating authenticator and supplicant.
- Fix issue with timestamps comparison of known networks.
- Fix issue with handling cancellation of power callbacks.
- Fix issue with honoring auto-connect setting on power up.
- Fix issue with crash during operstate callbacks.
-
-ver 0.6:
- Fix issue with syncing the PSK on first connection.
- Fix issue with unnecessary known object removal events.
-
-ver 0.5:
- Fix issue with EAPoL handling and Ad-Hoc networks.
- Add support for using agent with EAP-GTC methods.
- Add support for improved Known Networks management.
- Add support for Simultaneous Authentication of Equals.
- Add support for exposing supported modes of operation.
- Add support for D-Bus auto-activation via systemd.
-
-ver 0.4:
- Fix issue with handling all zero PMKID.
- Fix issue with handling PEAP servers and M bit requirement.
- Fix issue with handling MS-CHAP v2 and uninitialized memory.
- Fix issue with handling memory leak and aborting connections.
- Fix issue with handling memory leak and PSK configuration.
- Fix issue with handling not yet running D-Bus daemon.
- Add support for advanced scanning of hidden networks.
- Add support for MAC address randomization.
- Add support for Ad-Hoc network interface.
- Add support for Access Point interface.
-
-ver 0.3:
- Fix issue with auto-connect settings for open networks.
- Fix issue with handling beacon loss in roaming situations.
- Fix issue with handling bridged wireless network interfaces.
- Fix issue with handling EAP identity prompt or notification.
- Fix issue with handling EAP state reset and reauthentication.
- Add support for user specified hidden network connections.
- Add support for configuring WDS / 4ADDR operation.
-
-ver 0.2:
- Fix issue with unsupported bands from roam scan frequency set.
- Fix issue with handling disconnect by AP and by SME events.
- Fix issue with string start calculation for MS-CHAP v2.
- Add workaround for 0 oper class in neighbor report.
- Add support for EAPoL over NL80211 kernel feature.
- Add support for EAP-PWD authentication method.
- Add support for EAP-GTC authentication method.
- Add support for agent functionality to client.
-
-ver 0.1:
- Initial public release.
Copied: iwd/repos/community-x86_64/ChangeLog (from rev 650287, iwd/trunk/ChangeLog)
===================================================================
--- ChangeLog (rev 0)
+++ ChangeLog 2020-06-21 21:32:14 UTC (rev 650288)
@@ -0,0 +1,206 @@
+ver 1.8:
+ Fix issue with handling FT AKMs when not supported.
+ Fix issue with handling FILS and RSNE in authenticate.
+ Fix issue with handling auto-connection and quick scan.
+ Fix issue with sending multiple scan requests.
+ Add support for P2P feature and API.
+
+ver 1.7:
+ Fix issue with APs that send IGTK falsely in big endian.
+ Fix issue with setting linkmode & operstate for open networks.
+
+ver 1.6:
+ Fix issue with handling missing AP stop events.
+ Fix issue with handling out-of-order disconnect events.
+ Fix issue with handling missing auth/assoc support.
+ Fix issue with handling omitted EAP-TLS-CACert.
+ Fix issue with handling OWE PTK derivation.
+ Add support for internal frame exchange API.
+ Add support for MAC randomization and override.
+ Add support for per-network MAC addresses.
+
+ver 1.5:
+ Fix issue with handling missing NEW_WIPHY events.
+ Fix issue with interface creation and NEW_WIPHY events.
+ Fix issue with handling LastConnectedTime property change.
+ Fix issue with PEAPv0 interoperability with Windows.
+
+ver 1.4:
+ Fix issue with handling Crypto-Binding and invalid MACs.
+ Fix issue with handling change station error results.
+ Fix issue with handling DNS resolving installations.
+
+ver 1.3:
+ Fix issue with handling EAP-GTC and password requests.
+ Fix issue with handling Crypto-Binding TLV for PEAPv0.
+ Fix issue with handling key installation and PEAP Phase 2.
+ Fix issue with handling externally triggered scan requests.
+ Fix issue with handling RCPI calculation for RRM requests.
+
+ver 1.2:
+ Fix issue with handling scan requests while connecting.
+ Fix issue with handling scan duration for RRM requests.
+ Fix issue with handling parent TSF value for RRM requests.
+
+ver 1.1:
+ Fix issue with simple configuration support checks.
+ Fix issue with handling TLS tunnel and PEAPv0.
+ Add support for radio resource management.
+
+ver 1.0:
+ Add support for stable D-Bus interfaces.
+ Add support for network configuration documentation.
+
+ver 0.23:
+ Fix issue with strict certificate chain checks.
+ Fix issue with parsing RSNE_ADVANCE information.
+ Fix issue with parsing RSN information for WPA1.
+ Fix issue with logic error in scan frequency validation.
+ Fix issue with integer overflow and authentication frames.
+ Add support for installing various manual pages.
+
+ver 0.22:
+ Fix issue with hotplug and device capability detection.
+ Add support for IPv6 network configuration handling.
+ Add support for embedding certificates in profiles.
+
+ver 0.21:
+ Fix issue with cleartext ACK and tunneled EAP-Success.
+ Fix issue with setting bits in extended capabilities.
+ Fix issue with WPA-1 information element parsing.
+ Add support for handling QoS Map IE and frames.
+ Add support for STATE_DIRECTORY environment.
+ Add support for CONFIGURATION_DIRECTORY environment.
+
+ver 0.20:
+ Add support for adding Extended Capabilities bits.
+ Add support for ServerDomainMask configuration option.
+
+ver 0.19:
+ Add support for Hotspot 2.0 functionality.
+ Add support for FILS Fast Transition feature.
+ Add support for network configuration handling.
+ Add support for resolution services framework.
+
+ver 0.18:
+ Fix issue with handling stale scan results.
+ Fix issue with handling OWE group renegotiation.
+ Fix issue with handshake failures on FT-PSK.
+ Add support for FILS (Fast Initial Link Setup).
+
+ver 0.17:
+ Fix issue with handling association failure path.
+ Fix issue with handling checks for valid ECC point/scalar.
+ Fix issue with handling potential infinite loop and SAE.
+ Fix issue with handling randomization for passive scans.
+ Add support for randomization of SN for probe requests.
+ Add support for handling the FILS cipher suites.
+ Add support for ERP key caching feature.
+
+ver 0.16:
+ Add missing pkcs8.conf for module loading.
+
+ver 0.15:
+ Fix issue with handling RSSI thresholds.
+ Fix issue with handling abort for a connection.
+ Fix issue with stopping Access Point operation.
+ Add support for individual BSS blacklisting.
+ Add support for utilizing MAC randomization.
+ Add support for utilizing different key lengths.
+ Add support for 16, 24 and 32 byte MIC lengths.
+ Add support for handling driver rekying feature.
+
+ver 0.14:
+ Add support for tunneled MSCHAPv2 authentication.
+
+ver 0.13:
+ Fix issue with WSC interface runtime handling.
+ Add support for Opportunistic Wireless Encryption.
+ Add support for common EAP-TLS framework.
+
+ver 0.12:
+ Fix issue with handling 802.1x automatic connection.
+ Fix issue with handling missing support for backtrace.
+
+ver 0.11:
+ Fix issue with handling EAP-TTLS and redundant L flags.
+ Fix issue with handling EAP-TLS upper limit on request size.
+ Fix issue with handling handshake complete after setting keys.
+ Fix issue with handling access points with too many rates.
+ Fix issue with requiring PSK if passphrase is present.
+ Add support for retrieving list of hidden access points.
+ Add support for tunneled MS-CHAP.
+
+ver 0.10:
+ Fix issue with Ethernet authentication packet handling.
+ Fix issue with ad-hoc network scan results in station mode.
+ Fix issue with cancellation of ongoing rekey offload.
+ Add support for setting per-mac GTK credentials.
+ Add support for using external Embedded Linux library.
+
+ver 0.9:
+ Fix issue with handling EAP-WSC passwords.
+ Add support for TTLS-CHAP and TTLS-PAP.
+ Add support for handling FT over SAE.
+
+ver 0.8:
+ Fix issue with handling EAP_CACHE_NEVER secret types.
+ Fix issue with redundant usage of the L flag and PEAP.
+ Fix issue with EAP type 33 as termination mechanism for PEAPv1.
+ Add initial version of Ethernet authentication daemon.
+ Add support for Station mode interface.
+
+ver 0.7:
+ Fix issue with hard coded peer address and SAE networks.
+ Fix issue with raw passphrase requirement and SAE networks.
+ Fix issue with differentiating authenticator and supplicant.
+ Fix issue with timestamps comparison of known networks.
+ Fix issue with handling cancellation of power callbacks.
+ Fix issue with honoring auto-connect setting on power up.
+ Fix issue with crash during operstate callbacks.
+
+ver 0.6:
+ Fix issue with syncing the PSK on first connection.
+ Fix issue with unnecessary known object removal events.
+
+ver 0.5:
+ Fix issue with EAPoL handling and Ad-Hoc networks.
+ Add support for using agent with EAP-GTC methods.
+ Add support for improved Known Networks management.
+ Add support for Simultaneous Authentication of Equals.
+ Add support for exposing supported modes of operation.
+ Add support for D-Bus auto-activation via systemd.
+
+ver 0.4:
+ Fix issue with handling all zero PMKID.
+ Fix issue with handling PEAP servers and M bit requirement.
+ Fix issue with handling MS-CHAP v2 and uninitialized memory.
+ Fix issue with handling memory leak and aborting connections.
+ Fix issue with handling memory leak and PSK configuration.
+ Fix issue with handling not yet running D-Bus daemon.
+ Add support for advanced scanning of hidden networks.
+ Add support for MAC address randomization.
+ Add support for Ad-Hoc network interface.
+ Add support for Access Point interface.
+
+ver 0.3:
+ Fix issue with auto-connect settings for open networks.
+ Fix issue with handling beacon loss in roaming situations.
+ Fix issue with handling bridged wireless network interfaces.
+ Fix issue with handling EAP identity prompt or notification.
+ Fix issue with handling EAP state reset and reauthentication.
+ Add support for user specified hidden network connections.
+ Add support for configuring WDS / 4ADDR operation.
+
+ver 0.2:
+ Fix issue with unsupported bands from roam scan frequency set.
+ Fix issue with handling disconnect by AP and by SME events.
+ Fix issue with string start calculation for MS-CHAP v2.
+ Add workaround for 0 oper class in neighbor report.
+ Add support for EAPoL over NL80211 kernel feature.
+ Add support for EAP-PWD authentication method.
+ Add support for EAP-GTC authentication method.
+ Add support for agent functionality to client.
+
+ver 0.1:
+ Initial public release.
Deleted: PKGBUILD
===================================================================
--- PKGBUILD 2020-06-21 21:26:37 UTC (rev 650287)
+++ PKGBUILD 2020-06-21 21:32:14 UTC (rev 650288)
@@ -1,52 +0,0 @@
-# Maintainer : Christian Rebischke <chris.rebischke at archlinux.org>
-# Maintainer: Levente Polyak <anthraxx[at]archlinux[dot]org>
-# Contributor: AndyRTR <andyrtr at archlinux.org>
-
-pkgname=iwd
-pkgver=1.8
-pkgrel=1
-pkgdesc='Internet Wireless Daemon'
-arch=('x86_64')
-url='https://git.kernel.org/cgit/network/wireless/iwd.git/'
-license=('LGPL')
-depends=('glibc' 'readline' 'libreadline.so')
-makedepends=('python-docutils')
-backup=(etc/iwd/main.conf)
-source=("https://www.kernel.org/pub/linux/network/wireless/iwd-${pkgver}.tar"{.xz,.sign})
-sha512sums=('f1caa330b3ff18b4598efec596a4b9a22887833218a90d19d59717503679eff71fdb990cb63bd74b8f1523197a366cd803d799259e8002e5cde2745b03d51d8e'
- 'SKIP')
-validpgpkeys=('E932D120BC2AEC444E558F0106CA9F5D1DCF2659')
-changelog=ChangeLog
-install=iwd.install
-
-build() {
- cd ${pkgname}-${pkgver}
- ./configure --prefix=/usr \
- --sysconfdir=/etc \
- --localstatedir=/var \
- --with-runstatedir=/run \
- --libexecdir=/usr/lib/iwd \
- --enable-wired \
- --enable-ofono \
- --enable-sim-hardcoded \
- --enable-hwsim \
- --disable-tools
- make
-}
-
-check() {
- cd ${pkgname}-${pkgver}
- # pass broken tests - should reported upstream
- # One test fail because we need kernel capabilities that
- # we don't have inside of systemd-nspawn
- # this could only be fixed via changing our build environment
- make -k check || /bin/true
-}
-
-package() {
- cd ${pkgname}-${pkgver}
- make install DESTDIR="${pkgdir}"
- install -Dm 644 README -t "${pkgdir}/usr/share/doc/${pkgname}"
-}
-
-# vim: ts=2 sw=2 et:
Copied: iwd/repos/community-x86_64/PKGBUILD (from rev 650287, iwd/trunk/PKGBUILD)
===================================================================
--- PKGBUILD (rev 0)
+++ PKGBUILD 2020-06-21 21:32:14 UTC (rev 650288)
@@ -0,0 +1,52 @@
+# Maintainer : Christian Rebischke <chris.rebischke at archlinux.org>
+# Maintainer: Levente Polyak <anthraxx[at]archlinux[dot]org>
+# Contributor: AndyRTR <andyrtr at archlinux.org>
+
+pkgname=iwd
+pkgver=1.8
+pkgrel=1
+pkgdesc='Internet Wireless Daemon'
+arch=('x86_64')
+url='https://git.kernel.org/cgit/network/wireless/iwd.git/'
+license=('LGPL')
+depends=('glibc' 'readline' 'libreadline.so')
+makedepends=('python-docutils')
+backup=(etc/iwd/main.conf)
+source=("https://www.kernel.org/pub/linux/network/wireless/iwd-${pkgver}.tar"{.xz,.sign})
+sha512sums=('f1caa330b3ff18b4598efec596a4b9a22887833218a90d19d59717503679eff71fdb990cb63bd74b8f1523197a366cd803d799259e8002e5cde2745b03d51d8e'
+ 'SKIP')
+validpgpkeys=('E932D120BC2AEC444E558F0106CA9F5D1DCF2659')
+changelog=ChangeLog
+install=iwd.install
+
+build() {
+ cd ${pkgname}-${pkgver}
+ ./configure --prefix=/usr \
+ --sysconfdir=/etc \
+ --localstatedir=/var \
+ --with-runstatedir=/run \
+ --libexecdir=/usr/lib/iwd \
+ --enable-wired \
+ --enable-ofono \
+ --enable-sim-hardcoded \
+ --enable-hwsim \
+ --disable-tools
+ make
+}
+
+check() {
+ cd ${pkgname}-${pkgver}
+ # pass broken tests - should reported upstream
+ # One test fail because we need kernel capabilities that
+ # we don't have inside of systemd-nspawn
+ # this could only be fixed via changing our build environment
+ make -k check || /bin/true
+}
+
+package() {
+ cd ${pkgname}-${pkgver}
+ make install DESTDIR="${pkgdir}"
+ install -Dm 644 README -t "${pkgdir}/usr/share/doc/${pkgname}"
+}
+
+# vim: ts=2 sw=2 et:
Deleted: iwd.install
===================================================================
--- iwd.install 2020-06-21 21:26:37 UTC (rev 650287)
+++ iwd.install 2020-06-21 21:32:14 UTC (rev 650288)
@@ -1,6 +0,0 @@
-post_upgrade() {
- if (($(vercmp 0.20-3 $2) > 0)); then
- chmod 700 /var/lib/ead/
- chmod 700 /var/lib/iwd/
- fi
-}
Copied: iwd/repos/community-x86_64/iwd.install (from rev 650287, iwd/trunk/iwd.install)
===================================================================
--- iwd.install (rev 0)
+++ iwd.install 2020-06-21 21:32:14 UTC (rev 650288)
@@ -0,0 +1,6 @@
+post_upgrade() {
+ if (($(vercmp 0.20-3 $2) > 0)); then
+ chmod 700 /var/lib/ead/
+ chmod 700 /var/lib/iwd/
+ fi
+}
More information about the arch-commits
mailing list