[arch-commits] Commit in gnunet/repos/community-x86_64 (6 files)
Antonio Rojas
arojas at archlinux.org
Sat Nov 21 19:58:28 UTC 2020
Date: Saturday, November 21, 2020 @ 19:58:28
Author: arojas
Revision: 758539
archrelease: copy trunk to community-x86_64
Added:
gnunet/repos/community-x86_64/PKGBUILD
(from rev 758538, gnunet/trunk/PKGBUILD)
gnunet/repos/community-x86_64/defaults.conf
(from rev 758538, gnunet/trunk/defaults.conf)
gnunet/repos/community-x86_64/gnunet.service
(from rev 758538, gnunet/trunk/gnunet.service)
Deleted:
gnunet/repos/community-x86_64/PKGBUILD
gnunet/repos/community-x86_64/defaults.conf
gnunet/repos/community-x86_64/gnunet.service
----------------+
PKGBUILD | 98 ++---
defaults.conf | 966 +++++++++++++++++++++++++++----------------------------
gnunet.service | 20 -
3 files changed, 542 insertions(+), 542 deletions(-)
Deleted: PKGBUILD
===================================================================
--- PKGBUILD 2020-11-21 19:58:13 UTC (rev 758538)
+++ PKGBUILD 2020-11-21 19:58:28 UTC (rev 758539)
@@ -1,49 +0,0 @@
-# Maintainer: Sergej Pupykin <pupykin.s+arch at gmail.com>
-# Contributor: wahnby <wahnby at yahoo.fr>
-
-pkgname=gnunet
-pkgver=0.13.3
-pkgrel=1
-pkgdesc="A framework for secure peer-to-peer networking"
-arch=('x86_64')
-url="https://gnunet.org"
-license=('GPL')
-depends=('libextractor' 'sqlite' 'gnurl' 'libmicrohttpd' 'libidn' 'jansson' 'libsodium')
-makedepends=('git' 'bluez-libs' 'python' 'glpk' 'libpulse' 'opus' 'gst-plugins-base-libs')
-optdepends=('bluez-libs'
- 'python'
- 'glpk'
- 'libpulse'
- 'opus'
- 'gst-plugins-base-libs: for gnunet-helper-audio-record')
-backup=(etc/gnunetd.conf)
-options=('!makeflags')
-# TODO: key revoked, check for new signature on new release
-# source=(https://ftp.gnu.org/gnu/gnunet/gnunet-${pkgver/_/}.tar.gz{,.sig}
-#source=(https://ftp.gnu.org/gnu/gnunet/gnunet-${pkgver/_/}.tar.gz
-source=(git://git.gnunet.org/gnunet.git#tag=v$pkgver
- gnunet.service
- defaults.conf)
-validpgpkeys=('19647543F7861D3BF4E64FF7BF60708B48426C7E')
-md5sums=('SKIP'
- '54cce3d2415d95b2e5bd1bd88db3a0ea'
- '0fe23b2ca5b3fc47a0b5645e04406da0')
-
-build() {
- cd gnunet
- sed -i 's|contrib doc|doc|' Makefile.*
- ./bootstrap
- [ -f Makefile ] || ./configure --prefix=/usr \
- --without-mysql
- make
- make -C contrib
-}
-
-package() {
- cd gnunet
- make DESTDIR="$pkgdir" install
- make DESTDIR="$pkgdir" -C contrib install
- install -D -m0644 "$srcdir"/defaults.conf "$pkgdir"/etc/gnunetd.conf
- rm -rf "$pkgdir"/usr/include/libltdl "$pkgdir"/usr/lib/libltdl.* "$pkgdir"/usr/include/ltdl.h
- install -Dm0644 "$srcdir"/$pkgname.service "$pkgdir"/usr/lib/systemd/system/$pkgname.service
-}
Copied: gnunet/repos/community-x86_64/PKGBUILD (from rev 758538, gnunet/trunk/PKGBUILD)
===================================================================
--- PKGBUILD (rev 0)
+++ PKGBUILD 2020-11-21 19:58:28 UTC (rev 758539)
@@ -0,0 +1,49 @@
+# Maintainer: Sergej Pupykin <pupykin.s+arch at gmail.com>
+# Contributor: wahnby <wahnby at yahoo.fr>
+
+pkgname=gnunet
+pkgver=0.14.0
+pkgrel=1
+pkgdesc="A framework for secure peer-to-peer networking"
+arch=('x86_64')
+url="https://gnunet.org"
+license=('GPL')
+depends=('libextractor' 'sqlite' 'gnurl' 'libmicrohttpd' 'libidn' 'jansson' 'libsodium')
+makedepends=('git' 'bluez-libs' 'python' 'glpk' 'libpulse' 'opus' 'gst-plugins-base-libs')
+optdepends=('bluez-libs'
+ 'python'
+ 'glpk'
+ 'libpulse'
+ 'opus'
+ 'gst-plugins-base-libs: for gnunet-helper-audio-record')
+backup=(etc/gnunetd.conf)
+options=('!makeflags')
+# TODO: key revoked, check for new signature on new release
+# source=(https://ftp.gnu.org/gnu/gnunet/gnunet-${pkgver/_/}.tar.gz{,.sig}
+#source=(https://ftp.gnu.org/gnu/gnunet/gnunet-${pkgver/_/}.tar.gz
+source=(git://git.gnunet.org/gnunet.git#tag=v$pkgver
+ gnunet.service
+ defaults.conf)
+validpgpkeys=('19647543F7861D3BF4E64FF7BF60708B48426C7E')
+md5sums=('SKIP'
+ '54cce3d2415d95b2e5bd1bd88db3a0ea'
+ '0fe23b2ca5b3fc47a0b5645e04406da0')
+
+build() {
+ cd gnunet
+ sed -i 's|contrib doc|doc|' Makefile.*
+ ./bootstrap
+ [ -f Makefile ] || ./configure --prefix=/usr \
+ --without-mysql
+ make
+ make -C contrib
+}
+
+package() {
+ cd gnunet
+ make DESTDIR="$pkgdir" install
+ make DESTDIR="$pkgdir" -C contrib install
+ install -D -m0644 "$srcdir"/defaults.conf "$pkgdir"/etc/gnunetd.conf
+ rm -rf "$pkgdir"/usr/include/libltdl "$pkgdir"/usr/lib/libltdl.* "$pkgdir"/usr/include/ltdl.h
+ install -Dm0644 "$srcdir"/$pkgname.service "$pkgdir"/usr/lib/systemd/system/$pkgname.service
+}
Deleted: defaults.conf
===================================================================
--- defaults.conf 2020-11-21 19:58:13 UTC (rev 758538)
+++ defaults.conf 2020-11-21 19:58:28 UTC (rev 758539)
@@ -1,483 +0,0 @@
-[PATHS]
-SERVICEHOME = ~/.gnunet/
-# SERVICEHOME = /var/lib/gnunet/
-# DEFAULTCONFIG = /etc/gnunet.conf
-# If 'DEFAULTCONFIG' is not defined, the current
-# configuration file is assumed to be the default,
-# which is what we want by default...
-
-[gnunetd]
-HOSTKEY = $SERVICEHOME/.hostkey
-
-[TESTING]
-WEAKRANDOM = NO
-# How long before failing a connection?
-CONNECT_TIMEOUT = 30
-# How many connect attempts should we make?
-CONNECT_ATTEMPTS = 3
-# How many connections can happen simultaneously?
-MAX_OUTSTANDING_CONNECTIONS = 50
-
-# Should we clean up the files on peer group shutdown?
-DELETE_FILES = YES
-
-[client]
-HOME = $SERVICEHOME
-
-[nat]
-# Are we behind NAT?
-BEHIND_NAT = NO
-
-# Is the NAT hole-punched?
-PUNCHED_NAT = NO
-
-# Enable UPNP by default?
-ENABLE_UPNP = NO
-
-# Use addresses from the local network interfaces (inluding loopback, but also others)
-USE_LOCALADDR = YES
-
-# Use address obtained from a DNS lookup of our hostname
-USE_HOSTNAME = NO
-
-# External IP address of the NAT box (if known); IPv4 dotted-decimal ONLY at this time (should allow DynDNS!)
-# normal interface IP address for non-NATed peers;
-# possibly auto-detected (using UPnP) if possible if not specified
-# EXTERNAL_ADDRESS =
-
-# Should we use ICMP-based NAT traversal to try connect to NATed peers
-# or, if we are behind NAT, to allow connections to us?
-ENABLE_ICMP_CLIENT = NO
-ENABLE_ICMP_SERVER = NO
-
-# IP address of the interface connected to the NAT box; IPv4 dotted-decimal ONLY;
-# normal interface IP address for non-NATed peers;
-# likely auto-detected (via interface list) if not specified (!)
-# INTERNAL_ADDRESS =
-
-# Disable IPv6 support
-DISABLEV6 = NO
-
-# How often do we query the DNS resolver
-# for our hostname (to get our own IP), in ms
-HOSTNAME_DNS_FREQUENCY = 1200000
-
-# How often do we iterate over our
-# network interfaces to check for changes
-# in our IP address? in ms
-IFC_SCAN_FREQUENCY = 3000000
-
-# How often do we query the DNS resolver
-# for our hostname (to get our own IP), in ms
-DYNDNS_FREQUENCY = 140000
-
-[gnunet-nat-server]
-HOSTNAME = gnunet.org
-PORT = 5724
-
-[transport-tcp]
-# Use 0 to ONLY advertise as a peer behind NAT (no port binding)
-PORT = 2086
-ADVERTISED_PORT = 2086
-
-# Maximum number of open TCP connections allowed
-MAX_CONNECTIONS = 128
-
-TIMEOUT = 5000
-
-# ACCEPT_FROM =
-# ACCEPT_FROM6 =
-# REJECT_FROM =
-# REJECT_FROM6 =
-# BINDTO =
-
-MAX_CONNECTIONS = 128
-
-
-[transport-udp]
-PORT = 2086
-
-MAX_BPS = 1000000
-
-
-[transport-http]
-PORT = 1080
-MAX_CONNECTIONS = 128
-
-[transport-https]
-PORT = 4433
-CRYPTO_INIT = NORMAL
-KEY_FILE = https.key
-CERT_FILE = https.cert
-MAX_CONNECTIONS = 128
-
-
-[transport-wlan]
-# Name of the interface in monitor mode (typically monX)
-INTERFACE = mon0
-# Real hardware, no testing
-TESTMODE = 0
-
-
-[arm]
-PORT = 2087
-HOSTNAME = localhost
-HOME = $SERVICEHOME
-CONFIG = $DEFAULTCONFIG
-BINARY = gnunet-service-arm
-ACCEPT_FROM = 127.0.0.1;
-ACCEPT_FROM6 = ::1;
-DEFAULTSERVICES = topology hostlist
-UNIXPATH = /tmp/gnunet-service-arm.sock
-UNIX_MATCH_UID = YES
-UNIX_MATCH_GID = YES
-# GLOBAL_POSTFIX = -l $SERVICEHOME/{}-logs
-# GLOBAL_PREFIX =
-# USERNAME =
-# MAXBUF =
-# TIMEOUT =
-# DISABLEV6 =
-# BINDTO =
-# REJECT_FROM =
-# REJECT_FROM6 =
-# PREFIX =
-
-[statistics]
-AUTOSTART = YES
-PORT = 2088
-HOSTNAME = localhost
-HOME = $SERVICEHOME
-CONFIG = $DEFAULTCONFIG
-BINARY = gnunet-service-statistics
-ACCEPT_FROM = 127.0.0.1;
-ACCEPT_FROM6 = ::1;
-UNIXPATH = /tmp/gnunet-service-statistics.sock
-UNIX_MATCH_UID = NO
-UNIX_MATCH_GID = YES
-# DISABLE_SOCKET_FORWARDING = NO
-# USERNAME =
-# MAXBUF =
-# TIMEOUT =
-# DISABLEV6 =
-# BINDTO =
-# REJECT_FROM =
-# REJECT_FROM6 =
-# PREFIX =
-
-[resolver]
-AUTOSTART = YES
-PORT = 2089
-HOSTNAME = localhost
-HOME = $SERVICEHOME
-CONFIG = $DEFAULTCONFIG
-BINARY = gnunet-service-resolver
-ACCEPT_FROM = 127.0.0.1;
-ACCEPT_FROM6 = ::1;
-UNIXPATH = /tmp/gnunet-service-resolver.sock
-UNIX_MATCH_UID = NO
-UNIX_MATCH_GID = NO
-# DISABLE_SOCKET_FORWARDING = NO
-# USERNAME =
-# MAXBUF =
-# TIMEOUT =
-# DISABLEV6 =
-# BINDTO =
-# REJECT_FROM =
-# REJECT_FROM6 =
-# PREFIX =
-
-[peerinfo]
-AUTOSTART = YES
-PORT = 2090
-HOSTNAME = localhost
-HOME = $SERVICEHOME
-CONFIG = $DEFAULTCONFIG
-BINARY = gnunet-service-peerinfo
-ACCEPT_FROM = 127.0.0.1;
-ACCEPT_FROM6 = ::1;
-UNIXPATH = /tmp/gnunet-service-peerinfo.sock
-UNIX_MATCH_UID = NO
-UNIX_MATCH_GID = YES
-# DISABLE_SOCKET_FORWARDING = NO
-# USERNAME =
-# MAXBUF =
-# TIMEOUT =
-# DISABLEV6 =
-# BINDTO =
-# REJECT_FROM =
-# REJECT_FROM6 =
-# PREFIX =
-HOSTS = $SERVICEHOME/data/hosts/
-
-
-[transport]
-AUTOSTART = YES
-PORT = 2091
-HOSTNAME = localhost
-HOME = $SERVICEHOME
-CONFIG = $DEFAULTCONFIG
-BINARY = gnunet-service-transport
-#PREFIX = valgrind
-NEIGHBOUR_LIMIT = 50
-ACCEPT_FROM = 127.0.0.1;
-ACCEPT_FROM6 = ::1;
-PLUGINS = tcp
-UNIXPATH = /tmp/gnunet-service-transport.sock
-BLACKLIST_FILE = $SERVICEHOME/blacklist
-UNIX_MATCH_UID = YES
-UNIX_MATCH_GID = YES
-# DISABLE_SOCKET_FORWARDING = NO
-# USERNAME =
-# MAXBUF =
-# TIMEOUT =
-# DISABLEV6 =
-# BINDTO =
-# REJECT_FROM =
-# REJECT_FROM6 =
-# PREFIX =
-
-
-# ATS options
-DUMP_MLP = NO
-DUMP_SOLUTION = NO
-DUMP_OVERWRITE = NO
-DUMP_MIN_PEERS = 0
-DUMP_MIN_ADDRS = 0
-DUMP_OVERWRITE = NO
-ATS_MIN_INTERVAL = 15000
-ATS_EXEC_INTERVAL = 30000
-
-
-[core]
-AUTOSTART = YES
-PORT = 2092
-HOSTNAME = localhost
-HOME = $SERVICEHOME
-CONFIG = $DEFAULTCONFIG
-BINARY = gnunet-service-core
-ACCEPT_FROM = 127.0.0.1;
-ACCEPT_FROM6 = ::1;
-# quotas are in bytes per second now!
-TOTAL_QUOTA_IN = 65536
-TOTAL_QUOTA_OUT = 65536
-UNIXPATH = /tmp/gnunet-service-core.sock
-UNIX_MATCH_UID = YES
-UNIX_MATCH_GID = YES
-# DISABLE_SOCKET_FORWARDING = NO
-# DEBUG = YES
-# USERNAME =
-# MAXBUF =
-# TIMEOUT =
-# DISABLEV6 =
-# BINDTO =
-# REJECT_FROM =
-# REJECT_FROM6 =
-# PREFIX =
-
-
-[topology]
-MINIMUM-FRIENDS = 0
-FRIENDS-ONLY = NO
-AUTOCONNECT = YES
-TARGET-CONNECTION-COUNT = 16
-FRIENDS = $SERVICEHOME/friends
-CONFIG = $DEFAULTCONFIG
-BINARY = gnunet-daemon-topology
-
-[hostlist]
-# port for hostlist http server
-HTTPPORT = 8080
-HOME = $SERVICEHOME
-HOSTLISTFILE = $SERVICEHOME/hostlist/learned.data
-CONFIG = $DEFAULTCONFIG
-BINARY = gnunet-daemon-hostlist
-# consider having "-e" as default as well once implemented
-OPTIONS = -b
-SERVERS = http://v9.gnunet.org:58080/
-# proxy for downloading hostlists
-HTTP-PROXY =
-
-
-[datastore]
-AUTOSTART = YES
-UNIXPATH = /tmp/gnunet-service-datastore.sock
-UNIX_MATCH_UID = YES
-UNIX_MATCH_GID = YES
-PORT = 2093
-HOSTNAME = localhost
-HOME = $SERVICEHOME
-CONFIG = $DEFAULTCONFIG
-BINARY = gnunet-service-datastore
-ACCEPT_FROM = 127.0.0.1;
-ACCEPT_FROM6 = ::1;
-QUOTA = 100000000
-BLOOMFILTER = $SERVICEHOME/fs/bloomfilter
-DATABASE = sqlite
-# DISABLE_SOCKET_FORWARDING = NO
-
-[datastore-sqlite]
-FILENAME = $SERVICEHOME/datastore/sqlite.db
-
-[datastore-postgres]
-CONFIG = connect_timeout=10; dbname=gnunet
-
-[datastore-mysql]
-DATABASE = gnunet
-CONFIG = ~/.my.cnf
-# USER = gnunet
-# PASSWORD =
-# HOST = localhost
-# PORT = 3306
-
-[datacache-mysql]
-DATABASE = gnunetcheck
-CONFIG = ~/.my.cnf
-# USER = gnunet
-# PASSWORD =
-# HOST = localhost
-# PORT = 3306
-
-
-[fs]
-AUTOSTART = YES
-INDEXDB = $SERVICEHOME/idxinfo.lst
-TRUST = $SERVICEHOME/data/credit/
-IDENTITY_DIR = $SERVICEHOME/identities/
-STATE_DIR = $SERVICEHOME/persistence/
-UPDATE_DIR = $SERVICEHOME/updates/
-PORT = 2094
-HOSTNAME = localhost
-HOME = $SERVICEHOME
-CONFIG = $DEFAULTCONFIG
-BINARY = gnunet-service-fs
-ACCEPT_FROM = 127.0.0.1;
-ACCEPT_FROM6 = ::1;
-
-DELAY = YES
-CONTENT_CACHING = YES
-CONTENT_PUSHING = YES
-
-UNIXPATH = /tmp/gnunet-service-fs.sock
-UNIX_MATCH_UID = NO
-UNIX_MATCH_GID = YES
-# DISABLE_SOCKET_FORWARDING = NO
-# DEBUG = YES
-MAX_PENDING_REQUESTS = 65536
-# Maximum frequency we're allowed to poll the datastore
-# for content for migration (can be used to reduce
-# GNUnet's disk-IO rate)
-MIN_MIGRATION_DELAY = 100
-EXPECTED_NEIGHBOUR_COUNT = 128
-
-[dht]
-AUTOSTART = YES
-PORT = 2095
-HOSTNAME = localhost
-HOME = $SERVICEHOME
-CONFIG = $DEFAULTCONFIG
-BINARY = gnunet-service-dht
-ACCEPT_FROM = 127.0.0.1;
-ACCEPT_FROM6 = ::1;
-BUCKET_SIZE = 4
-UNIXPATH = /tmp/gnunet-service-dht.sock
-UNIX_MATCH_UID = YES
-UNIX_MATCH_GID = YES
-# DISABLE_SOCKET_FORWARDING = NO
-# DEBUG = YES
-# USERNAME =
-# MAXBUF =
-# TIMEOUT =
-# DISABLEV6 =
-# BINDTO =
-# REJECT_FROM =
-# REJECT_FROM6 =
-# PREFIX =
-# DO_FIND_PEER =
-# STRICT_KADEMLIA =
-# USE_MAX_HOPS =
-# MAX_HOPS =
-# REPUBLISH = YES
-# REPLICATION_FREQUENCY = 60
-# STOP_ON_CLOSEST =
-# STOP_FOUND =
-# CONVERGE_MODIFIER =
-
-
-[dhtcache]
-DATABASE = sqlite
-QUOTA = 1024000
-
-[block]
-PLUGINS = fs dht test dns
-
-[mesh]
-AUTOSTART = YES
-PORT = 2096
-HOSTNAME = localhost
-HOME = $SERVICEHOME
-CONFIG = $DEFAULTCONFIG
-BINARY = gnunet-service-mesh
-ACCEPT_FROM = 127.0.0.1;
-ACCEPT_FROM6 = ::1;
-UNIXPATH = /tmp/gnunet-service-mesh.sock
-UNIX_MATCH_UID = YES
-UNIX_MATCH_GID = YES
-
-[nse]
-AUTOSTART = YES
-PORT = 2097
-HOSTNAME = localhost
-HOME = $SERVICEHOME
-CONFIG = $DEFAULTCONFIG
-BINARY = gnunet-service-nse
-ACCEPT_FROM = 127.0.0.1;
-ACCEPT_FROM6 = ::1;
-UNIXPATH = /tmp/test-nse-service-nse.unix
-UNIX_MATCH_UID = YES
-UNIX_MATCH_GID = YES
-PROOFFILE = $SERVICEHOME/.nse-proof
-HISTOGRAM = $SERVICEHOME/nse-history.log
-
-# How 'slowly' should the proof-of-work be constructed (delay
-# between rounds in ms); sane values between 0 and ~1000.
-WORKDELAY = 5
-
-# Note: changing any of the values below will make this peer
-# completely incompatible with other peers!
-INTERVAL = 3600000
-WORKBITS = 20
-
-
-[vpn]
-CONFIG = $DEFAULTCONFIG
-BINARY = gnunet-daemon-vpn
-IPV6ADDR = 1234::1
-IPV6PREFIX = 32
-IPV4ADDR = 10.11.10.1
-IPV4MASK = 255.255.0.0
-VIRTDNS = 10.11.10.2
-IFNAME = vpn-gnunet
-
-[exit]
-CONFIG = $DEFAULTCONFIG
-BINARY = gnunet-daemon-exit
-IPV6ADDR = 1234:1::1
-IPV6PREFIX = 32
-IPV4ADDR = 10.10.1.1
-IPV4MASK = 255.255.0.0
-IFNAME = exit-gnunet
-ENABLE_UDP = NO
-ENABLE_TCP = NO
-
-[dns]
-AUTOSTART = YES
-PORT = 0
-HOSTNAME = localhost
-HOME = $SERVICEHOME
-CONFIG = $DEFAULTCONFIG
-BINARY = gnunet-service-dns
-ACCEPT_FROM = 127.0.0.1;
-ACCEPT_FROM6 = ::1;
-UNIXPATH = /tmp/gnunet-service-dns.sock
-PROVIDE_EXIT = NO
-
Copied: gnunet/repos/community-x86_64/defaults.conf (from rev 758538, gnunet/trunk/defaults.conf)
===================================================================
--- defaults.conf (rev 0)
+++ defaults.conf 2020-11-21 19:58:28 UTC (rev 758539)
@@ -0,0 +1,483 @@
+[PATHS]
+SERVICEHOME = ~/.gnunet/
+# SERVICEHOME = /var/lib/gnunet/
+# DEFAULTCONFIG = /etc/gnunet.conf
+# If 'DEFAULTCONFIG' is not defined, the current
+# configuration file is assumed to be the default,
+# which is what we want by default...
+
+[gnunetd]
+HOSTKEY = $SERVICEHOME/.hostkey
+
+[TESTING]
+WEAKRANDOM = NO
+# How long before failing a connection?
+CONNECT_TIMEOUT = 30
+# How many connect attempts should we make?
+CONNECT_ATTEMPTS = 3
+# How many connections can happen simultaneously?
+MAX_OUTSTANDING_CONNECTIONS = 50
+
+# Should we clean up the files on peer group shutdown?
+DELETE_FILES = YES
+
+[client]
+HOME = $SERVICEHOME
+
+[nat]
+# Are we behind NAT?
+BEHIND_NAT = NO
+
+# Is the NAT hole-punched?
+PUNCHED_NAT = NO
+
+# Enable UPNP by default?
+ENABLE_UPNP = NO
+
+# Use addresses from the local network interfaces (inluding loopback, but also others)
+USE_LOCALADDR = YES
+
+# Use address obtained from a DNS lookup of our hostname
+USE_HOSTNAME = NO
+
+# External IP address of the NAT box (if known); IPv4 dotted-decimal ONLY at this time (should allow DynDNS!)
+# normal interface IP address for non-NATed peers;
+# possibly auto-detected (using UPnP) if possible if not specified
+# EXTERNAL_ADDRESS =
+
+# Should we use ICMP-based NAT traversal to try connect to NATed peers
+# or, if we are behind NAT, to allow connections to us?
+ENABLE_ICMP_CLIENT = NO
+ENABLE_ICMP_SERVER = NO
+
+# IP address of the interface connected to the NAT box; IPv4 dotted-decimal ONLY;
+# normal interface IP address for non-NATed peers;
+# likely auto-detected (via interface list) if not specified (!)
+# INTERNAL_ADDRESS =
+
+# Disable IPv6 support
+DISABLEV6 = NO
+
+# How often do we query the DNS resolver
+# for our hostname (to get our own IP), in ms
+HOSTNAME_DNS_FREQUENCY = 1200000
+
+# How often do we iterate over our
+# network interfaces to check for changes
+# in our IP address? in ms
+IFC_SCAN_FREQUENCY = 3000000
+
+# How often do we query the DNS resolver
+# for our hostname (to get our own IP), in ms
+DYNDNS_FREQUENCY = 140000
+
+[gnunet-nat-server]
+HOSTNAME = gnunet.org
+PORT = 5724
+
+[transport-tcp]
+# Use 0 to ONLY advertise as a peer behind NAT (no port binding)
+PORT = 2086
+ADVERTISED_PORT = 2086
+
+# Maximum number of open TCP connections allowed
+MAX_CONNECTIONS = 128
+
+TIMEOUT = 5000
+
+# ACCEPT_FROM =
+# ACCEPT_FROM6 =
+# REJECT_FROM =
+# REJECT_FROM6 =
+# BINDTO =
+
+MAX_CONNECTIONS = 128
+
+
+[transport-udp]
+PORT = 2086
+
+MAX_BPS = 1000000
+
+
+[transport-http]
+PORT = 1080
+MAX_CONNECTIONS = 128
+
+[transport-https]
+PORT = 4433
+CRYPTO_INIT = NORMAL
+KEY_FILE = https.key
+CERT_FILE = https.cert
+MAX_CONNECTIONS = 128
+
+
+[transport-wlan]
+# Name of the interface in monitor mode (typically monX)
+INTERFACE = mon0
+# Real hardware, no testing
+TESTMODE = 0
+
+
+[arm]
+PORT = 2087
+HOSTNAME = localhost
+HOME = $SERVICEHOME
+CONFIG = $DEFAULTCONFIG
+BINARY = gnunet-service-arm
+ACCEPT_FROM = 127.0.0.1;
+ACCEPT_FROM6 = ::1;
+DEFAULTSERVICES = topology hostlist
+UNIXPATH = /tmp/gnunet-service-arm.sock
+UNIX_MATCH_UID = YES
+UNIX_MATCH_GID = YES
+# GLOBAL_POSTFIX = -l $SERVICEHOME/{}-logs
+# GLOBAL_PREFIX =
+# USERNAME =
+# MAXBUF =
+# TIMEOUT =
+# DISABLEV6 =
+# BINDTO =
+# REJECT_FROM =
+# REJECT_FROM6 =
+# PREFIX =
+
+[statistics]
+AUTOSTART = YES
+PORT = 2088
+HOSTNAME = localhost
+HOME = $SERVICEHOME
+CONFIG = $DEFAULTCONFIG
+BINARY = gnunet-service-statistics
+ACCEPT_FROM = 127.0.0.1;
+ACCEPT_FROM6 = ::1;
+UNIXPATH = /tmp/gnunet-service-statistics.sock
+UNIX_MATCH_UID = NO
+UNIX_MATCH_GID = YES
+# DISABLE_SOCKET_FORWARDING = NO
+# USERNAME =
+# MAXBUF =
+# TIMEOUT =
+# DISABLEV6 =
+# BINDTO =
+# REJECT_FROM =
+# REJECT_FROM6 =
+# PREFIX =
+
+[resolver]
+AUTOSTART = YES
+PORT = 2089
+HOSTNAME = localhost
+HOME = $SERVICEHOME
+CONFIG = $DEFAULTCONFIG
+BINARY = gnunet-service-resolver
+ACCEPT_FROM = 127.0.0.1;
+ACCEPT_FROM6 = ::1;
+UNIXPATH = /tmp/gnunet-service-resolver.sock
+UNIX_MATCH_UID = NO
+UNIX_MATCH_GID = NO
+# DISABLE_SOCKET_FORWARDING = NO
+# USERNAME =
+# MAXBUF =
+# TIMEOUT =
+# DISABLEV6 =
+# BINDTO =
+# REJECT_FROM =
+# REJECT_FROM6 =
+# PREFIX =
+
+[peerinfo]
+AUTOSTART = YES
+PORT = 2090
+HOSTNAME = localhost
+HOME = $SERVICEHOME
+CONFIG = $DEFAULTCONFIG
+BINARY = gnunet-service-peerinfo
+ACCEPT_FROM = 127.0.0.1;
+ACCEPT_FROM6 = ::1;
+UNIXPATH = /tmp/gnunet-service-peerinfo.sock
+UNIX_MATCH_UID = NO
+UNIX_MATCH_GID = YES
+# DISABLE_SOCKET_FORWARDING = NO
+# USERNAME =
+# MAXBUF =
+# TIMEOUT =
+# DISABLEV6 =
+# BINDTO =
+# REJECT_FROM =
+# REJECT_FROM6 =
+# PREFIX =
+HOSTS = $SERVICEHOME/data/hosts/
+
+
+[transport]
+AUTOSTART = YES
+PORT = 2091
+HOSTNAME = localhost
+HOME = $SERVICEHOME
+CONFIG = $DEFAULTCONFIG
+BINARY = gnunet-service-transport
+#PREFIX = valgrind
+NEIGHBOUR_LIMIT = 50
+ACCEPT_FROM = 127.0.0.1;
+ACCEPT_FROM6 = ::1;
+PLUGINS = tcp
+UNIXPATH = /tmp/gnunet-service-transport.sock
+BLACKLIST_FILE = $SERVICEHOME/blacklist
+UNIX_MATCH_UID = YES
+UNIX_MATCH_GID = YES
+# DISABLE_SOCKET_FORWARDING = NO
+# USERNAME =
+# MAXBUF =
+# TIMEOUT =
+# DISABLEV6 =
+# BINDTO =
+# REJECT_FROM =
+# REJECT_FROM6 =
+# PREFIX =
+
+
+# ATS options
+DUMP_MLP = NO
+DUMP_SOLUTION = NO
+DUMP_OVERWRITE = NO
+DUMP_MIN_PEERS = 0
+DUMP_MIN_ADDRS = 0
+DUMP_OVERWRITE = NO
+ATS_MIN_INTERVAL = 15000
+ATS_EXEC_INTERVAL = 30000
+
+
+[core]
+AUTOSTART = YES
+PORT = 2092
+HOSTNAME = localhost
+HOME = $SERVICEHOME
+CONFIG = $DEFAULTCONFIG
+BINARY = gnunet-service-core
+ACCEPT_FROM = 127.0.0.1;
+ACCEPT_FROM6 = ::1;
+# quotas are in bytes per second now!
+TOTAL_QUOTA_IN = 65536
+TOTAL_QUOTA_OUT = 65536
+UNIXPATH = /tmp/gnunet-service-core.sock
+UNIX_MATCH_UID = YES
+UNIX_MATCH_GID = YES
+# DISABLE_SOCKET_FORWARDING = NO
+# DEBUG = YES
+# USERNAME =
+# MAXBUF =
+# TIMEOUT =
+# DISABLEV6 =
+# BINDTO =
+# REJECT_FROM =
+# REJECT_FROM6 =
+# PREFIX =
+
+
+[topology]
+MINIMUM-FRIENDS = 0
+FRIENDS-ONLY = NO
+AUTOCONNECT = YES
+TARGET-CONNECTION-COUNT = 16
+FRIENDS = $SERVICEHOME/friends
+CONFIG = $DEFAULTCONFIG
+BINARY = gnunet-daemon-topology
+
+[hostlist]
+# port for hostlist http server
+HTTPPORT = 8080
+HOME = $SERVICEHOME
+HOSTLISTFILE = $SERVICEHOME/hostlist/learned.data
+CONFIG = $DEFAULTCONFIG
+BINARY = gnunet-daemon-hostlist
+# consider having "-e" as default as well once implemented
+OPTIONS = -b
+SERVERS = http://v9.gnunet.org:58080/
+# proxy for downloading hostlists
+HTTP-PROXY =
+
+
+[datastore]
+AUTOSTART = YES
+UNIXPATH = /tmp/gnunet-service-datastore.sock
+UNIX_MATCH_UID = YES
+UNIX_MATCH_GID = YES
+PORT = 2093
+HOSTNAME = localhost
+HOME = $SERVICEHOME
+CONFIG = $DEFAULTCONFIG
+BINARY = gnunet-service-datastore
+ACCEPT_FROM = 127.0.0.1;
+ACCEPT_FROM6 = ::1;
+QUOTA = 100000000
+BLOOMFILTER = $SERVICEHOME/fs/bloomfilter
+DATABASE = sqlite
+# DISABLE_SOCKET_FORWARDING = NO
+
+[datastore-sqlite]
+FILENAME = $SERVICEHOME/datastore/sqlite.db
+
+[datastore-postgres]
+CONFIG = connect_timeout=10; dbname=gnunet
+
+[datastore-mysql]
+DATABASE = gnunet
+CONFIG = ~/.my.cnf
+# USER = gnunet
+# PASSWORD =
+# HOST = localhost
+# PORT = 3306
+
+[datacache-mysql]
+DATABASE = gnunetcheck
+CONFIG = ~/.my.cnf
+# USER = gnunet
+# PASSWORD =
+# HOST = localhost
+# PORT = 3306
+
+
+[fs]
+AUTOSTART = YES
+INDEXDB = $SERVICEHOME/idxinfo.lst
+TRUST = $SERVICEHOME/data/credit/
+IDENTITY_DIR = $SERVICEHOME/identities/
+STATE_DIR = $SERVICEHOME/persistence/
+UPDATE_DIR = $SERVICEHOME/updates/
+PORT = 2094
+HOSTNAME = localhost
+HOME = $SERVICEHOME
+CONFIG = $DEFAULTCONFIG
+BINARY = gnunet-service-fs
+ACCEPT_FROM = 127.0.0.1;
+ACCEPT_FROM6 = ::1;
+
+DELAY = YES
+CONTENT_CACHING = YES
+CONTENT_PUSHING = YES
+
+UNIXPATH = /tmp/gnunet-service-fs.sock
+UNIX_MATCH_UID = NO
+UNIX_MATCH_GID = YES
+# DISABLE_SOCKET_FORWARDING = NO
+# DEBUG = YES
+MAX_PENDING_REQUESTS = 65536
+# Maximum frequency we're allowed to poll the datastore
+# for content for migration (can be used to reduce
+# GNUnet's disk-IO rate)
+MIN_MIGRATION_DELAY = 100
+EXPECTED_NEIGHBOUR_COUNT = 128
+
+[dht]
+AUTOSTART = YES
+PORT = 2095
+HOSTNAME = localhost
+HOME = $SERVICEHOME
+CONFIG = $DEFAULTCONFIG
+BINARY = gnunet-service-dht
+ACCEPT_FROM = 127.0.0.1;
+ACCEPT_FROM6 = ::1;
+BUCKET_SIZE = 4
+UNIXPATH = /tmp/gnunet-service-dht.sock
+UNIX_MATCH_UID = YES
+UNIX_MATCH_GID = YES
+# DISABLE_SOCKET_FORWARDING = NO
+# DEBUG = YES
+# USERNAME =
+# MAXBUF =
+# TIMEOUT =
+# DISABLEV6 =
+# BINDTO =
+# REJECT_FROM =
+# REJECT_FROM6 =
+# PREFIX =
+# DO_FIND_PEER =
+# STRICT_KADEMLIA =
+# USE_MAX_HOPS =
+# MAX_HOPS =
+# REPUBLISH = YES
+# REPLICATION_FREQUENCY = 60
+# STOP_ON_CLOSEST =
+# STOP_FOUND =
+# CONVERGE_MODIFIER =
+
+
+[dhtcache]
+DATABASE = sqlite
+QUOTA = 1024000
+
+[block]
+PLUGINS = fs dht test dns
+
+[mesh]
+AUTOSTART = YES
+PORT = 2096
+HOSTNAME = localhost
+HOME = $SERVICEHOME
+CONFIG = $DEFAULTCONFIG
+BINARY = gnunet-service-mesh
+ACCEPT_FROM = 127.0.0.1;
+ACCEPT_FROM6 = ::1;
+UNIXPATH = /tmp/gnunet-service-mesh.sock
+UNIX_MATCH_UID = YES
+UNIX_MATCH_GID = YES
+
+[nse]
+AUTOSTART = YES
+PORT = 2097
+HOSTNAME = localhost
+HOME = $SERVICEHOME
+CONFIG = $DEFAULTCONFIG
+BINARY = gnunet-service-nse
+ACCEPT_FROM = 127.0.0.1;
+ACCEPT_FROM6 = ::1;
+UNIXPATH = /tmp/test-nse-service-nse.unix
+UNIX_MATCH_UID = YES
+UNIX_MATCH_GID = YES
+PROOFFILE = $SERVICEHOME/.nse-proof
+HISTOGRAM = $SERVICEHOME/nse-history.log
+
+# How 'slowly' should the proof-of-work be constructed (delay
+# between rounds in ms); sane values between 0 and ~1000.
+WORKDELAY = 5
+
+# Note: changing any of the values below will make this peer
+# completely incompatible with other peers!
+INTERVAL = 3600000
+WORKBITS = 20
+
+
+[vpn]
+CONFIG = $DEFAULTCONFIG
+BINARY = gnunet-daemon-vpn
+IPV6ADDR = 1234::1
+IPV6PREFIX = 32
+IPV4ADDR = 10.11.10.1
+IPV4MASK = 255.255.0.0
+VIRTDNS = 10.11.10.2
+IFNAME = vpn-gnunet
+
+[exit]
+CONFIG = $DEFAULTCONFIG
+BINARY = gnunet-daemon-exit
+IPV6ADDR = 1234:1::1
+IPV6PREFIX = 32
+IPV4ADDR = 10.10.1.1
+IPV4MASK = 255.255.0.0
+IFNAME = exit-gnunet
+ENABLE_UDP = NO
+ENABLE_TCP = NO
+
+[dns]
+AUTOSTART = YES
+PORT = 0
+HOSTNAME = localhost
+HOME = $SERVICEHOME
+CONFIG = $DEFAULTCONFIG
+BINARY = gnunet-service-dns
+ACCEPT_FROM = 127.0.0.1;
+ACCEPT_FROM6 = ::1;
+UNIXPATH = /tmp/gnunet-service-dns.sock
+PROVIDE_EXIT = NO
+
Deleted: gnunet.service
===================================================================
--- gnunet.service 2020-11-21 19:58:13 UTC (rev 758538)
+++ gnunet.service 2020-11-21 19:58:28 UTC (rev 758539)
@@ -1,10 +0,0 @@
-[Unit]
-Description=A framework for secure peer-to-peer networking
-
-[Service]
-User=nobody
-Type=forking
-ExecStart=/usr/bin/gnunet-arm -s -c /etc/gnunetd.conf
-
-[Install]
-WantedBy=multi-user.target
Copied: gnunet/repos/community-x86_64/gnunet.service (from rev 758538, gnunet/trunk/gnunet.service)
===================================================================
--- gnunet.service (rev 0)
+++ gnunet.service 2020-11-21 19:58:28 UTC (rev 758539)
@@ -0,0 +1,10 @@
+[Unit]
+Description=A framework for secure peer-to-peer networking
+
+[Service]
+User=nobody
+Type=forking
+ExecStart=/usr/bin/gnunet-arm -s -c /etc/gnunetd.conf
+
+[Install]
+WantedBy=multi-user.target
More information about the arch-commits
mailing list